Sure-Foot Industries | 20260 First Avenue | Cleveland, Ohio 44130 | Toll Free: 800-522-6566 | www.surefootcorp.com

Innovative Safety Solutions

CONTACT US FOR A SAMPLE AT 800-522-6566

BOLD STEP® Cast Aluminum Stair Nosing

BOLD STEP® Cast Aluminum Abrasive Nosings are non-corrosive, attractively designed and will

virtually last the life of the building.

BOLD STEP® Cast Aluminum

Stair Nosing Advantages

To be installed in wet concrete

Creates visual awareness for

cautionary areas

Available in our standard depths of

3” & 4”

Standard lengths of our Cast Aluminum

Stair Treads are 36”, 48” & 60”

Available in 72” lengths upon request

Cast Aluminum Stair Nosings can be cleaned using a general purpose

industrial floor cleaner

Ships with wing anchors, nuts & bolts

When it comes to the safety of clients, visitors, and staff, no business can be too careful. At Sure-Foot Industries, we offer durable and high-quality products that aim to enhance pedestrian safety indoors and outdoors on a commercial property. Our products are cost-effective and built to last for the long haul.

BOLD STEP® metal stair nosings are non-corrosive, attractively designed and will virtually last the life of the building. Our Aluminum Cast Nosings are made from the highest quality aluminum, free from holes or defects. Our uniform quality comes with a natural sand cast finish and a surface of silicon carbide abrasive. These surfaces can be cleaned using a general purpose industrial floor cleaner or swept to remove and loosen dirt. They can also be cleaned with a stiff bristle brush or sprayed up to 1000 psi.

» 3 inch Cast Aluminum Stair

Nosing

» 4 inch Cast Aluminum Stair

Nosing

20260 First Avenue | Cleveland, Ohio 44130 | Toll Free: 800-522-6566 | www.surefootcorp.comAMERICAN MADE & AMERICAN OWNED SINCE 1979

Our cast aluminum stair nosings should be installed as concrete is poured during new construction or retroactively as a safety measure on an existing stairwell or staircase. Our standard depths include 3″ and 4″ and the thickness is 5/16″. The standard lengths of the cast aluminum stair treads are 36″, 48″ and 60″. We can create custom lengths as well. The grit on the nosings is evenly distributed and the cross-hatch etchings allow for a consistent tread. All Cast Aluminum Treads come with wing anchors.

» Cast Aluminum Stair Nosing OptionsBOLD STEP® Cast Aluminum

Stair Nosing Advantages

Designed to last a lifetime

Made from aluminum that will not warp,

bend, or rust

Cast Aluminum Stair Nosing Treads are a

safety measure on an existing stairwell or

staircase

Surface can be swept to remove any loose

dirt

Easy to maintain

For indoor and outdoor applications

Visitwww.surefootcorp.com

for additional installation instructions

Made in USA

We’ve created our cast aluminum stair nosings and treads with durability in mind. Our products should last for as long as the stairs onto which they’re installed. Even when the stair nosings are set into the concrete as it is cast, the nosings are designed to last for a lifetime. The grit on our aluminum does not scrape off and the aluminum will not warp, bend or rust. These nosings work well indoors and outdoors.

» 3 inch Cast Aluminum Stair Nosing

» 4 inch Cast Aluminum Stair Nosing

» Wing Anchor