Rubber and Vinyl Stair Treads & Landing Tiles provide safe interior stair coverings in any building with pedestrian traffic. Ideal for steps where aesthetics and fire safety are prime prerequisites. Each design is easy to clean and provides for safer pedestrian traffic.  

MODERN STAIR TREAD

Rubber raised disc design meets Federal Specs. RR-T-650E and ZZ-T-001237 (GSA-FSS)

 

GENERAL STAIR TREAD

Vinyl ribbed design meets Federal Specs. ZZ-T-001237 (GSA-FSS)

 

HEAVY DUTY STAIR TREAD

Rubber diamond design meets Federal Specs. RR-T-650E and ZZ-T-001237 (GSA-FSS)

 

SURE-FOOT Rub ber and Vinyl Stair T re ad s & Landing Tile s

 

PROUDLY MADE IN THE UNITED STATES  

Economical and attractive, Rubber and Vinyl Stair Treads & Landing Tiles are a long-wearing resilient safety solution. Created using a top quality compound, Rubber and Vinyl Stair Treads & Landing Tiles add safety and durability, lessen foot traffic noise and offer ease of cleaning on any stairway. Two rubber designs and one vinyl design

are available: Modern and Heavy Duty (Rubber) and General (Vinyl).

MODERN LANDING TILES

Rubber raised disc design

 

HEAVY DUTY LANDING TILES

Rubber diamond design

 

PROUDLY MADE IN THE UNITED STATES  

SURE-FOOT RUBBER & VINYL STAIR TREADS DESCRIPTION LENGTH STANDARD COLORS

General* 36”; 42”; 48” Grey, Brown, Black, or Sand

General with Grit Strip 36”; 42”; 48” Grey or Brown *Ribbed vinyl pattern is 12 inches deep to cover impact area for adjustable nose to fit pan-filled, molded concrete or terrazzo steps. Great for industrial, commercial and institutional buildings. Meets Federal Specs. ZZ-T-001237 (GSA-FSS)

Modern** 48”; 60”; 72” Light Grey, Medium Grey, Medium Brown, Dark Brown, or Black

Modern with Grit Strip 48”; 60”; 72” Medium Grey with Black Grit Strip or Black with Yellow Grit Strip

**Raised rubber disc pattern is 10 inches deep to cover impact area. Ideal for industrial, commercial and institutional buildings. Meets Federal Specs. RR-T-650E and ZZ-T-001237 (GSA-FSS)

Heavy Duty*** 48”; 60”; 72” Light Grey Marble, Slate Grey Marble, Birch Marble, Black,

Walnut, or Mahogany

Heavy Duty with Grit Strip 48”; 60”; 72” Slate Grey Marble with Black Grit Strip or Black with Yellow Grit Strip

***Rubber diamond pattern is 12 inches deep to cover impact area with longer surface for adjustable nose to fit pan-filled, molded concrete or terrazzo steps. Great for industrial, commercial and institutional buildings. Meets Federal Spec. RR-T-650E and ZZ-T-001237 (GSA-FSS)

CUSTOM ORDERS AVAILABLE UPON REQUEST

SURE-FOOT RUBBER LANDING TILES Description Dimension Standard Colors

Modern* (rubber raised disc design) 24” x 24” Medium Grey, Medium Brown, Dark Brown, Black Marble, Black

Heavy Duty* (rubber diamond design) 24” x 24” Light Grey Marble, Slate Grey Marble, Birch Marble, Black,

Walnut, or Mahogany *Modern and Heavy Duty Landing Tiles meet Federal Specs. RR-T-650E and ZZ-T-001237 (GSA-FSS)

CUSTOM ORDERS AVAILABLE UPON REQUEST

INSTALLATION

MAINTENANCE

Do not wash or apply any surface treatments for about one week after installation to allow sufficient time for the stair treads to become tightly bonded to the steps. Surface can be cleaned with mild detergent cleaner. Vacuum, mop or squeegee detergent from the stair tread. Do not use dusters or mops treated with mineral oil or other petroleum products. Periodically mop treads using 5% solution of liquid chlorine bleach in water.

ARCHITECTURAL SPECIFICATION Treads shall have a sanded back for proper adhesion, contain no asbestos; molded of top quality

compound; free of objectionable odors or imperfections which might impair service. Select standard length of: 36”, 42”, 48”, 54”, 60” or 72”. Select standard colors.

Begin installation by spreading adhesive on the stair step completely covering the surface and the nosing. If using contact adhesive, apply adhesive to bottom of rubber stair tread and completely underneath nosing. Set rubber stair treads into proper position on the step. Begin at the nosing and push toward the riser as firmly and tightly as possible. Roll newly installed tread with hand roller to insure that tread is fitted tightly against the step nosing.  

For more information contact your Grainger Representative or visit Grainger.com®.”