information procedure - sist · information procedure page 1 monthly notifications register...

Information procedure

Monthly Notifications Register

Notifications registered at CCMC from 2017-09-01 to 2017-09-30

Register issued on : 2017-10-06

A list of subsectors can be found at the end of this document.




Sector A : SERVICES


Subsector A02: CLEANING SERVICES

Subsector : A02 Registration Date : 2017-09-21Organization : SFS Draft Issue Date : 2017-08-15Country : Finland Latest Date for Comments : 2017-10-15

Project ID : 0000E471/0001 Draft for public enquiry

ICS :National Ref :Title : Cleaningquality.Systemforestablishingandassessingcleaningquality

Relatedness :National : REV/AMD SFS 5994

** End of Subsector **

Subsector A09: FACILITY MANAGEMENT



ICS :National Ref :Title : Educational organizations -- Management systems for educational organizations --

Requirements with guidance for use

Relatedness :National : New


Subsector A11: SAFETY AND SECURITY



ICS :National Ref :Title : Safe working on lifts

Relatedness :National : REV/AMD SFS 5880


** End of Sector **




Sector B : BUILDING AND CONSTRUCTION


Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2017-09-20Organization : ASICountry : Austria

Project ID : 00027219/0001 Project Established

ICS : 13.220.50, 91.140.30National Ref : ÖNORM H 6034Title : Ventilation and air conditioning systems - Requirements for function tests at interface

control units of fire dampers and smoke control dampers under thermal loadScope : This ÖNORM defines unified test requirements interface for control units of fire dampers

according to ÖNORM EN 15650 and smoke control dampers according to ÖNORM EN 12101-8. It does not specify other fire control systems that are activated by the fire alarm System, i.e. according to ÖNORM F 3001.


Subsector : B01 Registration Date : 2017-09-07Organization : NENCountry : Netherlands


ICS : 13.220.50National Ref : NEN 6075+C1:2012/A1 Concept nlTitle : Determination of the resistance to smoke movement between spacesScope : Determination of the resistance to smoke movement of partitions. Application: all partition

walls. NEN 6075+C1/A1 contains amendments.



Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2017-09-08Organization : BASCountry : Bosnia and Herzegovina


ICS : 91.010.30National Ref : pnBAS EN 1991-1-2/NA:2017Title : Eurocode 1: Actions on structures - Part 1-2: General actions - Actions on structures

exposed to fire - National annexScope : This document defines the value of national parameters or certain procedures for the

calculation with the standard BAS EN 1991-1-2:2015 and applied together with that standard.




ICS : 23.040.01, 91.140.80National Ref : NEN 3215:2011/A1:2017 Concept nlTitle : Drainage system inside and outside buildings - Determination methods for drainage

capacity, water and air density and distance for roof mounted outletsScope : NEN 3215:2011/A1:2017 amends NEN 3215:2011.


Subsector : B02 Registration Date : 2017-09-11Organization : UNECountry : Spain Latest Date for Comments : 2017-10-21

Project ID : P0048374/0001 Draft for public enquiry

ICS :National Ref : PNE-EN 1998-1:2011/1MTitle : Eurocode 8: Design of structures for earthquake resistance - Part 1: General rules,

seismic actions and rules for buildings. 1st Amendment: National annexScope : This modification includes the national annex of UNE-EN 1998-1, establishing the nationally

determined parameters, some non-contradictory complementary information and the status of informative annexes.

Relatedness :National : REV/AMD UNE-EN 1998-1:2011, UNE-EN 1998-1:2011/A1:2013



ICS :National Ref : PNE-EN 1998-2:2012/1M Title : Eurocode 8 - Design of structures for earthquake resistance - Part 2: Bridges. 1st

Amendment: National annexScope : This modification includes the national annex of UNE-EN 1998-2, establishing the nationally


Relatedness :National : REV/AMD UNE-EN 1998-2:2012



ICS :National Ref : PNE-EN 1998-3:2012/1MTitle : Eurocode 8: Design of structures for earthquake resistance - Part 3: Assessment and

retrofitting of buildings.1st Amendment: National annexScope : This modification includes the national annex of UNE-EN 1998-3, establishing the nationally

determined parameters, some non-contradictory complementary information and the status

of informative annexes.




ICS :National Ref : PNE-EN 1998-5:2011/1MTitle : Eurocode 8: Design of structures for earthquake resistance Part 5: Foundations, retaining

structures and geotechnical aspects.1st Amendment: National annexScope : This modification includes the national annex of UNE-EN 1998-5, establishing the nationally




Subsector B04: CEMENT



ICS :National Ref : PNE 80303-2Title : Cements with additional characteristics. Part 2: Sea water resisting cements.Scope : This draft standard revises the current version of sea water resisting cements standard trying

to align the text with the requirements established in the harmonized product standards of cement used. Therefore, it specifies additional requirements to be fulfilled by the corresponding cements complying with EN 197-1, EN 197-4 and EN 14216 to be considered waterresistingcementsaswellastheconformitycriteria.The above cited cements complying with the European related standards should be CE marked.

Relatedness :National : REV/AMD UNE 80303-2:2011



ICS :National Ref : PNE 80303-1Title : Cements with additional characteristics. Part 1: Sulphate resisting cements.Scope : This draft standard revises the current version of sulphate resisting cements standard trying

to align the text with the requirements established in the harmonized product standards of

cement used. Therefore, it specifies additional requirements to be fulfilled by the corresponding cements complying with EN 197-1 and EN 14216 to be considered sulphate resisting cements as well as the conformity criteria. Moreover, these cements have the same, even stricter, requirements than sea water resisting cements and therefore a cement designated as sulphate resisting cement should also be considered as sea water resisting cementsalthoughnotonthecontrary.

Relatedness :National : REV/AMD UNE 80303-1:2013


Subsector B08: DOORS AND WINDOWS

Subsector : B08 Registration Date : 2017-09-04Organization : UNMZ Draft Issue Date : 2017-11-30Country : Czech Republic Latest Date for Comments : 2017-12-30

Project ID : 74000317/0001 Draft for public enquiry

ICS :National Ref :Title : Pleated peripheral walling of buildings - Requirements for installation, control accuracy

and appearance checkScope : The aim of the new standard are Requirements for installation Pleated peripheral walling of

buildings

Relatedness :National : REV/AMDČSNP747251(2015)



ICS :National Ref :Title : Curtain walling - Installation requirement, accuracy and appearance checkScope : The aim of the new standard are Requirements for installation Curtain walling -

Watertightnessandappearancecheck

Relatedness :National : REV/AMDČSNP747250(2014)



ICS :National Ref :Title : Windows and external pedestrian doorsets – Requirements for instalationScope : The aim of the revision is obsolete document for instalation windows and external

pedestrian doorsets

Relatedness :National : REV/AMDČSN746077(2014)

Subsector : B08 Registration Date : 2017-09-08Organization : NBNCountry : Belgium

Project ID : BE664045/0001 Project Established

ICS : 91.060.50National Ref : prNBN B 25-002-1:2017Title : External window work - Part 1 - Generalities

Relatedness :National : REV/AMD NBN B 25-002-1:2009


Subsector B09: THERMAL MATTERS

Subsector : B09 Registration Date : 2017-09-20Organization : ASICountry : Austria


ICS : 91.120.10National Ref : ÖNORM H 6040Title : Calculation of the sensible and latent cooling load as well as of the internal temperature

evolution of rooms and buildings in summer (National specifications to ÖNORM EN ISO 52016 und ÖNORM EN ISO 52017)

Scope : As national amendment to ÖNORM EN ISO 52016 und ÖNORM EN ISO 52017, the present Standard specifies the calculation method for the determination of the cooling load (sensible and latent) of rooms and buildings as well as of the temperature evolution inside rooms in case of limited cooling performance under non-stationary edge conditions. As national amendment to ÖNORM EN ISO 13791, this Standard defines the calculation method for the determination of room temperature evolution (air and operative) without cooling system under non-stationary edge conditions.



Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY

Subsector : B17 Registration Date : 2017-09-28Organization : UNICountry : Italy


ICS : 17.180.20, 91.160.01National Ref : UNI1603513Title : Lighting designe of pedestrian crossings in roads with motorized traffic.Scope : The technical specification provides guidelines and requirements for the design of road

study the study area for pedestrian crossings in motorized traffic carriage considering the

lighting sistems and within the scope and at integration of the UNI 11248.



Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2017-09-28Organization : UNICountry : Italy


ICS : 23.040.70, 97.040.20National Ref : UNI1603538Title : Non-metallic flexible hoses for gas appliances for domestic and similar use Scope : This Standard defines the design requirements and test methods for non-metallic flexible

hoses for gas appliances for domestic and similar use with a nominal heat input up to 35 kW, using combustible gas of I, II, III families according to EN 437 and LPG at high pressure for theconnectionofLPGbottletopressureregulators.Thisstandardspecifiestwoclassesdependingontheoperatingpressure:- flexible hoses with a length specified by the manufacturer (type A1 e A2) for movable appliancesonly;-assembledflexiblehoses(typeBandC):forfittedandmovableappliances.These hoses can be installed in domestic premises and in external parts of buildings within a rangeoftemperaturesbetween-30°Cto90°C

Relatedness :National : REV/AMD UNI 7140:2013



ICS : 91.140.40National Ref : NPR 3378-22:2017 Concept nlTitle : Guidelines for NEN 1078 - Section gas appliances and appliance spaces - Part 22:

Installation spaces of gas appliances, appliance rooms and boiler rooms - Guidelines for NEN 1078 and NEN 3028

Scope : NPR 3378-22 gives gidelines for installation spaces of gas appliances, appliance rooms and boiler rooms.




ICS : 91.140.40National Ref : NPR 3378-5:2017 Concept nl

Title : Guidelines for gas installations - Section gas pipework - Part 5: Gas pipework - Installation general - Guidelines for NEN 1078 and NEN 8078

Scope : This part applies to clauses 5.2, 5.7 and 5.8 of NEN 1078 and NEN 8078:2004.



Subsector B26: ROAD BUILDING AND MAINTENANCE

Subsector : B26 Registration Date : 2017-09-25Organization : SNV Draft Issue Date : 2017-09-20Country : Switzerland Latest Date for Comments : 2017-11-01

Project ID : CH170021/0001 Draft for public enquiry

ICS : 93.080.01National Ref : prSN 640026Title : Project processing and project phases in road construction

Relatedness :National : REV/AMD SN 640026:2012


Subsector B34: BUILDING AND CONSTRUCTION ENVIRONMENTAL ASPECTS



ICS : 93.080.99National Ref : prSN 640577Title : Protection of trees

Relatedness :National : REV/AMD SN 640577a:2003


Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2017-09-28Organization : EVSCountry : Estonia


ICS : 91.100.15National Ref : prEVS 927Title : Burnt shale for building materials - Specification, performance and conformityScope : This standard gives a specification for burnt shale, which is produced from the combustion

of pulverized oil shale in energy generation plants, followed by dry separation of produced fine dispersed mineral particles. Burnt shale consists of clinker minerals, quicklime, dehydrated calcium sulphate, glass phase and insoluble residue. There are three types of burnt shale, which confirm to this standard: 1. burnt shale, separated by electric filters, for

production of cement - burnt shale for cement; 2. burnt shale, separated by cyclone filters, for production of aerated concrete - burnt shale for aerated concrete; 3. burnt shale, separated by textile filters, for production of concrete - burnt shale for concrete. This standard defines the characteristics, test methods and evaluation of conformity of burnt shale.




ICS : 93.080.30National Ref : NEN 3381:2017 Concept nlTitle : Road traffic signs - Additional requirements for fixed traffic signsScope : NEN 3381 contains requirements, classification and test methods for traffic signs.




ICS : 91.140.01National Ref : prSIA 2056Title : Electricityinbuildings-

Energy and performance requirements

Relatedness :National : REV/AMD SIA 380-4:2006


** End of Sector **




Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS


Subsector C01: Food products

Subsector : C01 Registration Date : 2017-09-15Organization : TSECountry : Turkey

Project ID : t1013210/0001 Project Established

ICS : 67.120.10National Ref :Title : Canned rosto- Ready to serve Scope : This standard cotains canned rosto – ready to serve.




ICS : 67.080.20National Ref :Title : Canned Green Beans With Meat-Ready To ServeScope : This standard applies to canned green beans with meat which is ready to serve.




ICS : 67.060National Ref :Title : Canned Chick-Peas-Ready to ServeScope : This standard comprise canned Chick-Peas-Ready to Serve




ICS : 67.060National Ref :Title : Canned Chick-Peas Stewed With Meat-Ready to Serve Scope : This standard applies to canned chick-peas stewed with meat which is ready to serve.




ICS : 67.080.10National Ref :Title : Rose JamScope : This Standard contains the rose jams manufactured by using fruit of rose (Rose domescena

M.) and does not contain special rose jam manufactured for diet.




ICS : 67.180.10National Ref :Title : Jelly Candy Scope : This standard covers jelly candy, it does not cover ready jelly mix




ICS : 67.080.20National Ref :Title : Canned eggplant kebap -Ready to serve Scope : This standard specifies "Canned eggplant kebap -Ready to serve" which is ready to serve.



Subsector C04: LABORATORY GLASSWARE

Subsector : C04 Registration Date : 2017-09-28Organization : UNICountry : Italy


ICS : 71.040.10National Ref : UNI1603496

Title : Fume cupboards for chemical handling. Limit values for containment, face velocity and air exchange efficiency

Scope : This standard contains the performance specifications required for fume cupboards to be used in the handling of chemicals in industrial, research and teaching activities, in particular theacceptabilitylimitvaluesfor:•Containmentandrobustnessofcontainment•facevelocity•airexchangeefficiency.Definitions of the methodologies and procedures for conducting the test of the above requirementscanbefoundinUNIEN14175-Part3.Additional requirements may be sought-after, for special use fume cupboards (e.g. those used in continuous processes); requirements that have to be specified case by case dependingonthespecifictypeofuse.This specification does not apply to ventilated cabinets



Subsector C21: COSMETICS

Subsector : C21 Registration Date : 2017-09-18Organization : UNECountry : Spain Latest Date for Comments : 2017-10-28


ICS :National Ref : PNE 84679Title : Cosmetic raw materials. Plant extracts. Determination of oleuropein content in olive leaf

extracts by liquid chromatography.Scope : This standard defines the procedure for the determination of oleuropein content by HPLC

in olive leaf plant extracts, for use in cosmetics

Relatedness :National : REV/AMD UNE 84679:2008


Subsector C22: BIO-BASED PRODUCTS

Subsector : C22 Registration Date : 2017-09-21Organization : SNCountry : Norway

Project ID : NOT17033/0001 Project Established

ICS : 67.120National Ref : NS 9415Title : Marine fish farms – Requirements for site survey, risk analyses, design, dimensioning,

production, installation and operation Scope : The aim of the standard is to reduce the escape of fish from marine fish farms in Norway.

The standard will give requirements and recommendations for planning, production and operation of fish farms. The requirements will cover all main components as net bag, mooring, float collar, fleet as well as the interactions between main components and overall functionality.

Relatedness :

National : New


Subsector C99: UNDETERMINED

Subsector : C99 Registration Date : 2017-09-07Organization : NENCountry : Netherlands


ICS : 07.100.01National Ref : NEN 8771:20117 Concept nlTitle : Design, operations and maintenance of biogas installations Scope : NEN 8770 describes requirements for the design, management, maintenance of biogas

installations with focus on the safety, environment and quality.




ICS :National Ref : PNE 315500Title : Supplies used in organic crop production. Products for pest and disease management.Scope : This standard establishes requirements for pesticides and phytosanitary products used for

pests and diseases control in plant production, suitable for organic agriculture, in accordancewithlegislationinforce.This standard is not applicable for biodynamic preparations although these are authorised in organicagriculture,becausetheyaredirectlypreparedbythefarmerintheirfarms.This standard is not applicable to post-harvest products.




ICS :National Ref : PNE 142500Title : Supplies used in organic crop production. Fertilizers and liming materials.Scope : This standard establishes requirements for fertilizers and liming materials used in plant

production,suitablefororganicagriculture,inaccordancewithlegislationinforce.



** End of Sector **




Sector F : FUNDAMENTAL STANDARDS


Subsector F12: INFORMATION PROCESSING SYSTEMS

Subsector : F12 Registration Date : 2017-09-11Organization : UNECountry : Spain Latest Date for Comments : 2017-10-21


ICS :National Ref : PNE 148004Title : Geographic Information - Open geographic dataScope : This International Standard establishes a standard definition of what shall be understood as

open geographic data and defines a set of requirements for publishing a set of geographic data in such a way as to be open geographic data.



Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2017-09-11Organization : UNECountry : Spain Latest Date for Comments : 2017-10-26


ICS :National Ref : PNE 66500Title : Minimum requirements for the certification of supplies used in in organic crop production

according to UNE 142500 and UNE 315500Scope : This standard defines the minimum requirements for bodies providing certification of those

responsibles of placing in the market supplies used in organic crop production according to UNE 142500 and/or UNE 315500



** End of Sector **




Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE


Subsector H04: SPORTS EQUIPMENT

Subsector : H04 Registration Date : 2017-09-20Organization : ASICountry : Austria


ICS : 13.060.25, 97.220.10National Ref : ÖNORM M 5872Title : Equipment of water treatment plants for swimming pools with measuring and control

instrumentsScope : This Austrian Standard defines the use of manual and automated measurement and control

equipment for spa baths that are subject to the Austrian Baederhygieneverordnung.



Subsector H09: FURNITURE



ICS : 97.140National Ref : ÖNORM A 1610-2Title : Furniture - Requirements - Part 2: Dimensions, areas required, spacingsScope : This Austrian Standard includes specifications concerning dimensions and position areas for

planning and furnishing in the field of dwelling, office and object equipment as well as the required movement areas and distances. Furthermore, this ÖNORM offers assistance for the footprint planning of rooms.



Subsector H99: UNDETERMINED



ICS :13.060.10, 13.060.25, 97.220.10

National Ref : ÖNORM M 6230/ATitle : Bathing waters - Requirements for water quality, analysis and assessmentScope : The Austrian Standard ÖNORM M 6230 describes basic principles for the evaluation of

waterbodies in terms of their qualification for swimming and bathing, and provides further guidance for the investigation, evaluation and management of man-made bathing water.



** End of Sector **




Sector I : MECHANICAL ENGINEERING


Subsector I08: AGRICULTURAL MACHINES

Subsector : I08 Registration Date : 2017-09-11Organization : UNECountry : Spain Latest Date for Comments : 2017-10-11


ICS :National Ref : PNE 68072Title : Irrigation equipment. Rotating sprinklers. Design and operation requirementsScope : This standard specifies the requirements for design and operation of sprinklers used in

agricultural irrigation, as well as their test methods.



Subsector I15: EQUIPMENT FOR PETROLEUM INDUSTRY

Subsector : I15 Registration Date : 2017-09-21Organization : SFS Draft Issue Date : 2017-08-17Country : Finland Latest Date for Comments : 2017-10-18


ICS :National Ref :Title : SFS3352Servicestationforflammableliquids

Annex C (normative) Above ground tanks and equipments for petrol and ethanolfuel


Subsector : I15 Registration Date : 2017-09-21Organization : SFS Draft Issue Date : 2017-08-17Country : Finland Latest Date for Comments : 2017-10-18


ICS :National Ref :Title : SFS 3352 Service station for fammable liquids Appendix D Electrical equipments in

service station. Installation, inspection, documents and service and maintenance


Subsector : I15 Registration Date : 2017-09-20Organization : ASICountry : Austria


ICS : 23.040.99National Ref : ÖNORM M 7325Title : Scraper traps for pressure pipelinesScope : This Austrian Standard includes requirements for pig traps serving for the insertion and

extractionofpig.Pigsareusedfor-cleaning(e.g.bybrushesorscrapers)-separationofdifferentconveyorfluids-testingofthepipe(e.g.bycalibrationpigs)or-otherpurposes.ThedesignofthepigsthemselvesisnotspecifiedinthisÖNORM.All pressures mentioned are excessive pressures.



** End of Sector **




Sector M : METALLIC MATERIALS


Subsector M08: LIGHT ALLOYS

Subsector : M08 Registration Date : 2017-09-11Organization : UNECountry : Spain Latest Date for Comments : 2017-10-21


ICS :National Ref : PNE 38019Title : Anodizing of aluminium and its alloys. Vocabulary.Scope : This standard defines the terms that concern anodized aluminium. An index of equivalent

English, French, German and Italian terms is included as an annex.



** End of Sector **




Sector N : NON-METALLIC MATERIALS


Subsector N05: TEXTILES

Subsector : N05 Registration Date : 2017-09-18Organization : UNECountry : Spain Latest Date for Comments : 2017-10-28


ICS :National Ref : PNE 40607Title : Agrotextiles. Determination of the geometric uniformity of the woven fabrics with

monofilamentsScope : This standard establishes a method for quantify the geometric uniformity of the agrotextiles

since the point of view of its geometry. The geometric parameters valued can be measured usingimagesobtainedbyadevicethatincorporatedadigitalcamera.Thisstandardappliestotheagrotextileofweftandwarpmadewithmonofilaments.



Subsector N09: PLASTICS

Subsector : N09 (Secondary Subsector)

Registration Date : 2017-09-28

Organization : UNICountry : Italy


ICS : 23.040.01, 83.080.01National Ref : UNI1603537Title : Durability of the products and of the systems made of plastic materials - Guidelines for

thedeterminationsoftheassessmentmethodsandtherelatedtestsScope : The technical report has been drafted to clarify the meaning and scope of the durability

requirements and how these requirements can be included into the technical specifications of the products and systems. The technical report identifies the aspects of durability as a property of a product / installation to last for a definite time (long term) without showing breaks or weaknesses that could affect its use which may provide guidance for the preparation of technical specifications and product / system standards in relation to the intendeduseandtheassessmentmethodstobeadoptedfordurability.Thistechnicalreportdoesnotcoverinstallation.



Subsector N14: PLASTICS PIPES

Subsector : N14 Registration Date : 2017-09-28Organization : UNICountry : Italy


ICS : 23.040.01, 83.080.01National Ref : UNI1603537

Title : Durability of the products and of the systems made of plastic materials - Guidelines for thedeterminationsoftheassessmentmethodsandtherelatedtests

Scope : The technical report has been drafted to clarify the meaning and scope of the durability requirements and how these requirements can be included into the technical specifications of the products and systems. The technical report identifies the aspects of durability as a property of a product / installation to last for a definite time (long term) without showing breaks or weaknesses that could affect its use which may provide guidance for the preparation of technical specifications and product / system standards in relation to the intendeduseandtheassessmentmethodstobeadoptedfordurability.Thistechnicalreportdoesnotcoverinstallation.



** End of Sector **




Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT


Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2017-09-06Organization : UNMZ Draft Issue Date : 2017-08-31Country : Czech Republic Latest Date for Comments : 2017-11-30


ICS :National Ref :Title : Water quality - Determination of radium 226

Relatedness :National : REV/AMD CSN 75 7822 (1998)

Subsector : S09 Registration Date : 2017-09-27Organization : UNMZCountry : Czech Republic


ICS :National Ref :Title : Water quality - Classification of surface water quality

Relatedness :National : REV/AMD CSN 75 7221 (1998)


Subsector S22: ENERGY SAVING

Subsector : S22 Registration Date : 2017-09-07Organization : NENCountry : Netherlands


ICS : 75.160.01National Ref : NTA 8003:2017 Concept nlTitle : Classification of biomass for energy recoveryScope : NTA 8003 describes a classification system to range solid and liquid biomass for energy

recovery.



** End of Sector **




Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING


Subsector T04: TYRES

Subsector : T04 Registration Date : 2017-09-11Organization : UNECountry : Spain Latest Date for Comments : 2017-10-21


ICS :National Ref : PNE 69050Title : Tyres, rims and valves. Tyre use cycle. Maintenance, repair and regrooving of tyres

manualScope : TO ESTABLISH BASIC STANDARDS FOR A CORRECT TYRE MAINTENANCE; AS WELL AS A

CORRECT REPAIR AND REGROOVING WHEN ALLOWED AND NECESSARY, FOR ENSURING THAT ALL THE SAFETY CONDITIONS ARE PRESERVED DURING ITS USEFUL LIFE, TAKING CARE OR ITS STRUCTURE TO ENLARGE ITS USEFUL LIFE.




ICS :National Ref : PNE 69051Title : Tyres, rims and valves. Tyre use cycle. Second-hand tyresScope : To define characteristics, verification and marking for used tyres, capable of being reused as

second-hand tyres



Subsector T18: ELEVATING PLATFORMS



ICS :National Ref : PNE 58921Title : Instructions for the fitting, handling, check and revisions of mobile elevating work

platformsScope : This technical specification provides requirements for the fitting, handling, check and

revisions of mobile elevating work platforms (this document supersedes UNE 58921:2002 IN). It covers all the type Platforms included and manufactured according to EN 280.

Relatedness :National : REV/AMD UNE 58921:2002 IN


Subsector T20: TRAM- AND RAILWAY ENGINEERING

Subsector : T20 Registration Date : 2017-09-28Organization : UNICountry : Italy


ICS : 45.060National Ref : UNI1603453Title : Metropolitan railways and tramways - Horizontal and vertical track alignmentScope : This standard provide rules for the design of the horizontal and vertical alignment of the

lines, the track cant and the track gauge widening. This standard applies to the lines of transport systems “metro”, “light metro”, “rapid tramway” (or “light rail”) and “tramway”, as defined in UNI 8379.

Relatedness :National : REV/AMD UNI 7836:1978


** End of Sector **

2011-06

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A14 Aesthetic Services / 403;409

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction


reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products


reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C22 Bio-Based products / 411

C99 Undetermined / 386

Sector F: Fundamental standards


reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use


reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering


reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials


reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials


reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238; 408

N22 Feather and related materials / 222

N23 Diamond / 410

N99 Undetermined / /

Sector S: Health, environment and medical equipment


reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging


reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology


Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR

information procedure - sist · information procedure page 1 monthly notifications register...

Documents