monthly notifications register · monthly notifications register notifications registered at ccmc...

96
Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from 2010-12-01 to 2010-12-31 Register issued on : 2011-01-14 A list of subsectors can be found at the end of this document.

Upload: hoangkhue

Post on 13-Sep-2018

266 views

Category:

Documents


0 download

TRANSCRIPT

Information procedure Page 1

Monthly Notifications Register

Notifications registered at CCMC from 2010-12-01 to 2010-12-31

Register issued on : 2011-01-14

A list of subsectors can be found at the end of this document.

Information procedure Page 2

Monthly Notifications Register

Notifications registered at CCMC from 2010-12-01 to 2010-12-31

Sector A : SERVICES

Register issued on : 2011-01-14

Page 3Subsector A11: SAFETY AND SECURITY

Subsector : A11 Registration Date : 2010-12-06Organization : BSICountry : United KingdomProject ID : 01003623/0001 Project EstablishedICS :National Ref : BS 7872Title : Manned security services. Cash-in-transit services (collection and delivery). Code of

practice

Relatedness :National : New

** End of Subsector **

** End of Sector **

Information procedure Page 4

Monthly Notifications Register

Notifications registered at CCMC from 2010-12-01 to 2010-12-31

Sector B : BUILDING AND CONSTRUCTION

Register issued on : 2011-01-14

Page 5Subsector B01: FIRE PROTECTION

Subsector : B01 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023645/0001 Project EstablishedICS : 13.220.10National Ref : ÖNORM F 2106Title : Wire binding of couplings in fire pressure hosesScope : This ÖNORM defines requirements of wire bindings of couplings in fire pressure hoses.

Relatedness :National : New

Subsector : B01 Registration Date : 2011-12-28Organization : LVS Draft Issue Date : 2011-01-03Country : Latvia Latest Date for Comments : 2011-02-11Project ID : 00240004/0001 Draft for public enquiryICS : 13.340.20National Ref : prLVS 332Title : The keeping of fire extinguishers in operative conditionScope : The standard applies to portable and mobile extinguishers

Relatedness :National : REV/AMD LVS 332

Subsector : B01 Registration Date : 2010-12-06Organization : BSICountry : United KingdomProject ID : 01003541/0001 Project EstablishedICS :National Ref : BS 6203Title : Guide to fire characteristics and fire performance of expanded polystyrene materials

(EPS and XPS) used in building applications

Relatedness :National : New

Subsector : B01 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 03100765/0001 Project EstablishedICS :National Ref : 03100765Title : Aluminium alloy delivery coupling type B with nominal pressure PN 16

Relatedness :National : New

Subsector : B01 Registration Date : 2011-12-27Organization : UNICountry : Italy

Page 6

Project ID : 39001341/0001 Project EstablishedICS : 13.220.50National Ref : U39001341Title : Fire proofing systems - Inspection modes for the installation - Part 1: Intumescent

coatingScope : The standard specifies the inspection modes for the installation of intumescent coating

used as fire proofing systems, for the control of the conformity to design specifications, taking into account the type of protected building element and the fire resistance requested.

Relatedness :National : REV/AMD UNI 10898-1:2001

Subsector : B01 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 39001350/0001 Project EstablishedICS : 13.220.50National Ref : U39001350Title : Extended application of results from fire resistance tests - Lightweight partitionsScope : This document provides guidance and defines procedures for variations of products and

element construction parameters related to the design of lightweight non-loadbearing partitions.

Relatedness :National : New

Subsector : B01 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 70001610/0001 Project EstablishedICS : 13.220.20National Ref : U70001610Title : Fixed fire fighting systems - Plastic Piping sytems - Fire valvesScope : This standard specifies minimum requirements for fire valves and their installation

operations. It applies to valves intended to be used at the following conditions: - allowable operating pressure PFA up to 16 bar; - operating temperature of 20 ° C

Relatedness :National : New

Subsector : B01 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172041/0001 Project EstablishedICS :National Ref : PR XP S61-502Title : Firefighting and rescue service equipment - Support for removable equipment - Safety

and performance requirements for the assistance systems

Relatedness :National : New

Page 7

Subsector : B01 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172042/0001 Project EstablishedICS :National Ref : PR NF S61-518Title : Firefighting and rescue service vehicles - Firefighting and rescue appliances - CCF type

pumping appliances

Relatedness :National : New

** End of Subsector **

Subsector B02: STRUCTURES

Subsector : B02 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 00515493/0001 Project EstablishedICS :National Ref : 00515493Title : Concrete, reinforced and prestressed concrete structures - Part 3: Execution of

structures - National Annex to DIN EN 13670

Relatedness :National : New

Subsector : B02 Registration Date : 2010-12-21Organization : SIS Draft Issue Date : 2010-12-20Country : Sweden Latest Date for Comments : 2011-02-20Project ID : 00812310/0001 Draft for public enquiryICS :National Ref : 812310Title : Fibre concrete - Design of fibre concrete structures (preliminary title)Scope : Design rules for fibre concrete structures, as far as possible adapted to Eurocode 2

Relatedness :National : New

** End of Subsector **

Subsector B03: CONCRETE

Subsector : B03 Registration Date : 2010-12-03Organization : SNV Draft Issue Date : 2010-11-29Country : Switzerland Latest Date for Comments : 2011-02-28Project ID : CH100021/0001 Draft for public enquiryICS : 91.080.40National Ref : SIA 262Title : Concrete structures

Relatedness :National : REV/AMD SIA 262 (2003)

Page 8

Subsector : B03 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171346/0001 Project EstablishedICS :National Ref : PR XP P18-409Title : Concrete with steel fibers. Flexural strengh test

Relatedness :National : New

Subsector : B03 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171358/0001 Project EstablishedICS :National Ref : PR NF P18-452Title : Concretes. Measuring the flow time of concretes and mortars using a workabilitymeter

Relatedness :National : New

Subsector : B03 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171359/0001 Project EstablishedICS :National Ref : PR XP P18-420Title : Concrete. Scaling test for hardened concrete surfaces exposed to frost in the presence

of a salt solution

Relatedness :National : New

Subsector : B03 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171360/0001 Project EstablishedICS :National Ref : PR NF P18-414Title : Testing of concretes. Non destructive testing. Measurement of the dominant resonance

frequency

Relatedness :National : New

Subsector : B03 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171361/0001 Project EstablishedICS :National Ref : PR NF P18-508

Page 9

Title : Additions for concrete. Limestone additions. Specifications and conformity criteria

Relatedness :National : New

Subsector : B03 Registration Date : 2010-12-17Organization : SNCountry : NorwayProject ID : NOT10015/0001 Draft for public enquiryICS : 77.140.15National Ref : prNS 3576-2Title : Steel for the reinforcement of concrete - Dimensions and properties - Part 2: Ribbed

bars B500NBScope : Revsion with focus on requirements to characteristic yield strength and to coils

Relatedness :National : NewEuropean : Not Equivalent to EN 10080

Subsector : B03 Registration Date : 2010-12-17Organization : SNCountry : NorwayProject ID : NOT10015/0001 Draft for public enquiryICS : 77.140.15National Ref : prNS 3576-2Title : Steel for the reinforcement of concrete - Dimensions and properties - Part 2: Ribbed

bars B500NBScope : Revsion with focus on requirements to characteristic yield strength and to coils

Relatedness :National : NewInternational : Not Equivalent to ISO 15630

** End of Subsector **

Subsector B06: GYPSUM

Subsector : B06 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023644/0001 Project EstablishedICS : 77.140.70, 91.100.10National Ref : ÖNORM DIN 18182-1Title : Accessories for use with gypsum plasterboards - Part 1: Steel plate sections Scope : This standard applies to steel plate sections, used by processing plasterboards according to

ÖNORM EN 520 at subconstructions.

Relatedness :National : New

** End of Subsector **

Subsector B07: GLASS

Subsector : B07 Registration Date : 2011-12-27Organization : UNI

Page 10

Country : ItalyProject ID : 58003020/0001 Project EstablishedICS : 81.040.20National Ref : U58003020Title : Glass in building - Determination of the strength of glass panes applied as secondary

structures and infill panels - Calculation method and determination of glass strength by testing

Scope : This technical report provides criteria and procedures to determine, by calculus and testing, the glass strength under acting loads. It is applicable to glass panes as secondary structures and with function of infill panels

Relatedness :National : New

** End of Subsector **

Subsector B10: TIMBER STRUCTURES

Subsector : B10 Registration Date : 2010-12-06Organization : BSICountry : United KingdomProject ID : 01003478/0001 Project EstablishedICS :National Ref : BS 5756:2007+A1Title : Visual grading of hardwood. Specification

Relatedness :National : New

Subsector : B10 Registration Date : 2010-12-06Organization : BSICountry : United KingdomProject ID : 01003479/0001 Project EstablishedICS :National Ref : BS 4978:2007+A1Title : Visual strength grading of softwood. Specification

Relatedness :National : New

** End of Subsector **

Subsector B12: MASONRY

Subsector : B12 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 00515340/0001 Project EstablishedICS :National Ref : 00515340Title : Floor bricks and plasterboards, statically active

Relatedness :National : New

Page 11

Subsector : B12 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171461/0001 Project EstablishedICS :National Ref : PR NF DTU 20.1 P3/A1Title : Building work - Small mansonry unit walls - Partitions and walls - Part 3 : Guide for

selection of site-dependent façade wall types

Relatedness :National : New

Subsector : B12 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171462/0001 Project EstablishedICS :National Ref : PR NF DTU 20.1 P4/A1Title : Building work - Small mansonry unit walls - Partitions and walls - Part 4 : Calculation

rules and minimum construction provisions

Relatedness :National : New

** End of Subsector **

Subsector B14: GEOTECHNICS

Subsector : B14 Registration Date : 2010-12-13Organization : NBNCountry : BelgiumProject ID : BE053298/0001 Project EstablishedICS : 91.010.30, 91.080.30National Ref : prNBN EN 1996-3 ANBTitle : Eurocode 6 - Design of masonry structures - Part 3 : Simplified calculation methods for

unreinforced masonry structures - National annex

Relatedness :National : New

Subsector : B14 Registration Date : 2010-12-03Organization : SNV Draft Issue Date : 2010-11-30Country : Switzerland Latest Date for Comments : 2011-03-12Project ID : CH100022/0001 Draft for public enquiryICS : 11.060.20National Ref : SIA 405Title : Geographic Data for supply and waste lines

Relatedness :National : REV/AMD SIA 405 (1999)

** End of Subsector **

Subsector B15: SANITARY APPLIANCES

Page 12

Subsector : B15 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171226/0001 Project EstablishedICS :National Ref : PR XP D12-208Title : Sanitary appliances - Built-in frames

Relatedness :National : New

** End of Subsector **

Subsector B19: CERAMIC TILES

Subsector : B19 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023639/0001 Project EstablishedICS : 91.180National Ref : ÖNORM B 3407Title : Execution of laying of tiles, flags and mosaics Scope : This Austrian Standard regulates the execution of laying of tiles, flags and mosaics and also

the laying of tiles and flags on heating floor screeds. It does not contain determinations of the laying of coverings for outdoor use and on substrate stressed under pressure water.

Relatedness :National : New

** End of Subsector **

Subsector B20: DRAINAGE EQUIPMENT

Subsector : B20 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023643/0001 Project EstablishedICS : 23.040.50, 93.030National Ref : ÖNORM B 5074Title : Complementary provisions to ÖNORM EN 1916 - Concrete pipes and fittings,

unreinforced, steel fibre and reinforcedScope : This ÖNORM has to be applied solely in conjunction with ÖNORM EN 1916. For pipes and

fittings made of unreinforced concrete, steel fibre concrete and of reinforced concrete this ÖNORM contains requirements and related test methods for which no consensus could be reached prior to publication of EN 1916 (see ÖNORM EN 1916:2003, table 1). In the present ÖNORM 2 types of pipes are specified: - Type 1: These pipes and fittings correspond to the basic specifications of EN 1916 and to the requirements contained in ÖNORM B 5074 corresponding to EN 1916:2003, table 1. They are resistant against environments with low chemical agressiveness (agressivity classes AS 0 and AS 1 according to ÖNORM B 2503:2009, table 2) and are mainly used for stromwater drainage systems. - Type 2: These pipes and fittings are matching the basic requirements of ÖNORM EN 1916 and those additional requirements contained in ÖNORM B 5074 in regard of the resistance against chemically aggressive environments (aggressivity classes AS 2, AS 2L and AS 3 according to ÖNORM B 2503:2009, table 2). They are particularly suitable for combined wastewater and for sewerage systems.

Page 13

Relatedness :National : New

** End of Subsector **

Subsector B22: WALLCOVERINGS

Subsector : B22 Registration Date : 2010-12-23Organization : UNICountry : ItalyProject ID : 87035520/0001 Project EstablishedICS : 91.060.10National Ref : U87035520Title : Stone wall and ceiling coverings - Instruction for the design, installation and

maintenanceScope : The standard gives instructions for the design, installation and maintenance of stone

internal and external wall and ceiling coverings.

Relatedness :National : New

** End of Subsector **

Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT

Subsector : B25 Registration Date : 2010-12-23Organization : UNICountry : ItalyProject ID : 01129101/0001 Project EstablishedICS : 75.160.30National Ref : E01129101Title : Gas odorisation for domestic and similar uses - Part 1: Terms and definitionsScope : This standard specifies terms and definitions related to the gas odorisation for domestic

and similar uses.

Relatedness :National : REV/AMD UNI 7132:1995

Subsector : B25 Registration Date : 2010-12-23Organization : UNICountry : ItalyProject ID : 01129102/0001 Project EstablishedICS : 75.160.30National Ref : E01129102Title : Gas odorisation for domestic and similar uses - Part 2: Requirements, check and

managementScope : This standard defines the basic criteria for the gas odorisation and control systems of

intensity and degree of fuel gas odorisation

Relatedness :National : REV/AMD UNI 7133:2006

Subsector : B25 Registration Date : 2010-12-23

Page 14

Organization : UNICountry : ItalyProject ID : 01129103/0001 Project EstablishedICS : 75.160.30National Ref : E01129103Title : Gas odorisation for domestic and similar uses - Part 3: Test procedures for olfactory

characteristics of odurous fluidsScope : The standard specifies a method for the determination of the olfactory characteristics of

odorous fluids through laboratory or on site testing.

Relatedness :National : REV/AMD UNI 7133:2006

Subsector : B25 Registration Date : 2010-12-23Organization : UNICountry : ItalyProject ID : 01129104/0001 Project EstablishedICS : 75.160.30National Ref : E01129104Title : Gas odorisation for domestic and similar uses - Part 4: Odorant requirementsScope : this standard:- defines the characteristics of the olfactory odorants;- establishes the

requirements for the use of odorants, in addition to those contained in EN ISO 13734

Relatedness :National : REV/AMD UNI 7133:2006

Subsector : B25 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171475/0001 Project EstablishedICS :National Ref : PR NF E29-190-2Title : Gas pressure regulators for distribution and service lines - Part 2 : Type B Regulators

Relatedness :National : New

Subsector : B25 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036772/0001 Project EstablishedICS :National Ref : PNE 60405-2Title : Transition mechanical connections PE - metals, for mains, connections and receiving

installations with a maximum operation pressure up to 10 bar. Part 2 : Fixed mechanical connections.

Scope : This standard applies to fixed mechanical linkages of PE-metal transitions for networks, connections, service lines and receiving installations with a maximum operating pressure up to 10 bar using gaseous fuels in the first, second or third family identified in the standard UNE 60002.

Relatedness :National : REV/AMD UNE 60405-2:2003, UNE 60405-2/1M:2004, UNE 60405-2:2003/2M:2008, UNE

Page 15

National : 60405-2:2003/3M:2009

** End of Subsector **

Subsector B26: ROAD BUILDING AND MAINTENANCE

Subsector : B26 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171561/0001 Project EstablishedICS :National Ref : PR NF P98-332Title : Roadways and ancillaries - Rules for distance between buried (utilities) networks and

rules for proximity between networks and plants

Relatedness :National : New

Subsector : B26 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171562/0001 Project EstablishedICS :National Ref : PR NF P98-331Title : Roadways and related dependencies - Trenches : opening up, backfilling, repairwork

Relatedness :National : New

** End of Subsector **

Subsector B27: WATERPROOFING MATERIALS

Subsector : B27 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 87025550/0001 Project EstablishedICS : 91.060.20National Ref : U87025550Title : Criteria for design of the resistance to wind of continuous roofingsScope : This document apply to the continuous roofing systems with sealing elements

manufactured with flexible sheets and establish the general criteria for design related to the wind action. In the standard are reported the possible constraint categories, mechanical, for ballast and for adhesion and specified the criteria calculation.

Relatedness :National : New

Subsector : B27 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171458/0001 Project EstablishedICS :

Page 16

National Ref : PR NF DTU 40.211 P2Title : Building works - Roof covering made of clay flat interlocking tiles - Part 2 : Contract bill

of special clauses

Relatedness :National : New

Subsector : B27 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171459/0001 Project EstablishedICS :National Ref : PR NF DTU 40.211 P1-2Title : Building works - Roof covering made of clay flat interlocking tiles - Part 1-2 : General

criteria for choice of materials

Relatedness :National : New

Subsector : B27 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171460/0001 Project EstablishedICS :National Ref : PR NF DTU 40.21 P1-1Title : Building works - Roof covering made of slipping or grooved clay tiles - Part 1-1 :

Technical specifications

Relatedness :National : New

Subsector : B27 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171463/0001 Project EstablishedICS :National Ref : PR NF DTU 40.21 P1-2Title : Building works - Roof covering made of slipping or grooved clay tiles - Part 1-2 : General

criteria for choice of materials

Relatedness :National : New

Subsector : B27 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171464/0001 Project EstablishedICS :National Ref : PR NF DTU 40.21 P2Title : Building works - Roof covering made of slipping or grooved clay tiles - Part 2 : Contract

bill of special clauses

Relatedness :

Page 17

National : New

Subsector : B27 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171465/0001 Project EstablishedICS :National Ref : PR NF DTU 40.211 P1-1Title : Building works - Roof covering made of clay flat interlocking tiles - Part 1-1 : Technical

specifications

Relatedness :National : New

** End of Subsector **

Subsector B28: FLOOR COVERINGS

Subsector : B28 Registration Date : 2010-12-23Organization : UNICountry : ItalyProject ID : 40005082/0001 Project EstablishedICS : 79.080National Ref : U40005082Title : Wood floring - Installation - Criteria and methods of assessment - Part 2: Floating

installationScope : The standard defines criteria and methods of assessmente to assess thw floating installation

of indoor wood floring and parquet.

Relatedness :National : New

** End of Subsector **

Subsector B30: FLOOR AND SURFACING

Subsector : B30 Registration Date : 2010-12-06Organization : BSICountry : United KingdomProject ID : 01003548/0001 Project EstablishedICS :National Ref : BS 4592-0Title : Industrial type flooring and stair treads. Part 0. Common design requirements and

recommendations for installation

Relatedness :National : New

** End of Subsector **

Subsector B31: HEATING SYSTEMS IN BUILDINGS

Subsector : B31 Registration Date : 2010-12-15Organization : SNV Draft Issue Date : 2010-12-10Country : Switzerland Latest Date for Comments : 2011-03-04

Page 18

Project ID : CH100023/0001Draft for public

enquiryICS : 91.140.10National Ref : SIA 384/3Title : Heating systems in buildings - energy demand

Relatedness :National : New

** End of Subsector **

Subsector B99: UNDETERMINED

Subsector : B99 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 84000690/0001 Project EstablishedICS : 91.100.15National Ref : U84000690Title : Cultural heritage - Natural and artificial stone - Determination of the water absorption by

contact spongeScope : This Standard defines a method for the determination of the water absorption of a natural

and artificial stone per unit area versus time.

Relatedness :National : New

Subsector : B99 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 87005590/0001 Project EstablishedICS : 91.010.20National Ref : U87005590Title : Technical control surveyor service for building and constructionsScope : This standard establishes criteria concerning the appointment of the istitution in charge of

technical control surveyor and give instruction for the development of this service for building and constructions.

Relatedness :National : REV/AMD UNI 10721:1998

Subsector : B99 Registration Date : 2010-12-22Organization : SNV Draft Issue Date : 2010-12-16Country : Switzerland Latest Date for Comments : 2011-01-24Project ID : CH100024/0001 Draft for public enquiryICS : 91.010.20National Ref : SIA 124Title : Price change due to inflation: Procedures with the amount of evidence

Relatedness :National : New

Subsector : B99 Registration Date : 2011-12-29

Page 19

Organization : AFNORCountry : FranceProject ID : FA171572/0001 Project EstablishedICS :National Ref : PR NF DTU 32.3 P2Title : Building works - Steel frame construction for houses and residential buildings - Part 2:

Contract bill of special administrative model clauses

Relatedness :National : New

Subsector : B99 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172070/0001 Project EstablishedICS :National Ref : PR NF DTU 32.3 P1-2Title : Building works - Steel frame construction for houses and residential buildings - Partie

1-2: General criteria for selection of materials

Relatedness :National : New

Subsector : B99 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036734/0001 Project EstablishedICS :National Ref : PNE 112011Title : Corrosion of concrete reinforcement steel. Determination of the carbonatation depht for

in-service concrete.Scope : This standard describes a method for the determination of the carbonatation depht for in-

service concrete.

Relatedness :National : REV/AMD UNE 112011:1994

Subsector : B99 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036735/0001 Project EstablishedICS :National Ref : PNE 112010Title : Corrosion of concrete reinforcement steel. Chloride determination for in-service

concrete.Scope : This standard describes a method for the determination of chloride contents for in-service

concrete.

Relatedness :National : REV/AMD UNE 112010:1994

** End of Subsector **

** End of Sector **

Information procedure Page 20

Monthly Notifications Register

Notifications registered at CCMC from 2010-12-01 to 2010-12-31

Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS

Register issued on : 2011-01-14

Page 21Subsector C01: Food products

Subsector : C01 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 05701499/0001 Project EstablishedICS :National Ref : 05701499Title : Food hygiene - Pest control in the food area

Relatedness :National : New

Subsector : C01 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 05701505/0001 Project EstablishedICS :National Ref : 05701505Title : Vinegar - Isotopic analysis of acetic acid and water - Part 1: 2H-NMR analysis of acetic

acid; German version prEN ....:2011

Relatedness :National : New

Subsector : C01 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 05701506/0001 Project EstablishedICS :National Ref : 05701506Title : Vinegar - Isotopic analysis of acetic acid and water - Part 2:13C-IRMS analysis of acetic

acid

Relatedness :National : New

Subsector : C01 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 05701507/0001 Project EstablishedICS :National Ref : 05701507Title : Vinegar - Isotopic analysis of acetic acid and water - Part 3: 18O-IRMS analysis of water

Relatedness :National : New

Subsector : C01 Registration Date : 2010-12-23Organization : UNICountry : ItalyProject ID : 59008090/0001 Project Established

Page 22

ICS : 65.020National Ref : U59008090Title : Animal welfare - Minimum requirements for the drafting of a scheme for animal intended

to food productionScope : This standard provides the elements for drafting a scheme on animal welfare of animals

intended to food production for human consumption.

Relatedness :National : New

Subsector : C01 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172065/0001 Project EstablishedICS :National Ref : PR NF V03-135Title : Foodstuffs - Determination of vitamin C by high performance liquid chromatography

Relatedness :National : New

Subsector : C01 Registration Date : 2010-12-10Organization : AENORCountry : Spain Latest Date for Comments : 2011-01-06Project ID : P0021739/0002 Draft for public enquiryICS :National Ref : PNE 155114Title : Fresh vegetables. Controlled production. Pumpkin.Scope : It specifies requirements of a controlled production system of pumpkin.

Relatedness :National : REV/AMD UNE 155001-14:2003

Subsector : C01 Registration Date : 2010-12-10Organization : AENORCountry : Spain Latest Date for Comments : 2011-01-06Project ID : P0021740/0002 Draft for public enquiryICS :National Ref : PNE 155115Title : Fresh vegetables. Controlled production. Potato.Scope : It specifies requirements of a controlled production system of potato.

Relatedness :National : REV/AMD UNE 155001-15:2003

Subsector : C01 Registration Date : 2010-12-10Organization : AENORCountry : Spain Latest Date for Comments : 2011-01-06Project ID : P0035811/0002 Draft for public enquiryICS :National Ref : PNE 155110

Page 23

Title : Fresh vegetables. Controlled production. Chinese cabbage.Scope : This project describes the particular aspects of a controlled production system for Chinese

cabbage.

Relatedness :National : REV/AMD UNE 155110:2005

Subsector : C01 Registration Date : 2010-12-10Organization : AENORCountry : Spain Latest Date for Comments : 2011-01-06Project ID : P0035814/0002 Draft for public enquiryICS :National Ref : PNE 155205Title : Fruits for fresh consumption. Controlled production. Orange, mandarin, lemon, lime,

grape fruit and hybrids.Scope : This project specifies the general requirements of a controlled production system for citrus,

under controlled conditions.

Relatedness :National : REV/AMD UNE 155005-2:2003

** End of Subsector **

Subsector C02: PAINTS AND RELATED PRODUCTS

Subsector : C02 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 00200704/0001 Project EstablishedICS :National Ref : 00200704Title : Aerospace - Application of liquid coating materials

Relatedness :National : New

** End of Subsector **

Subsector C03: CHEMISTRY

Subsector : C03 Registration Date : 2010-12-10Organization : AENORCountry : Spain Latest Date for Comments : 2011-01-06Project ID : P0034420/0002 Draft for public enquiryICS :National Ref : PNE 84767Title : Cosmetic raw materials. Plant extracts. Hydroglycolic extract burdock (Arctium majus l.)Scope : This standard determines the specifications required by the hydroglycolic extract of

burdock in cosmetic uses.

Relatedness :National : New

Subsector : C03 Registration Date : 2010-12-10

Page 24

Organization : AENORCountry : Spain Latest Date for Comments : 2011-01-06

Project ID : P0034423/0002Draft for public

enquiryICS :National Ref : PNE 84768Title : Cosmetic raw materials. Plant extracts. Hydroglycolic extract horsetail (Equisetum

arvense l.)Scope : This standard determines the specifications required by the hydroglycolic extract of

Horsetail in cosmetic uses.

Relatedness :National : New

** End of Subsector **

Subsector C11: TOBACCO

Subsector : C11 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036576/0001 Project EstablishedICS :National Ref : PNE 118012Title : Tobacco and tobacco products. Determination of total alkaloids. Analysis method by

continuous flow.Scope : This UNE standard specifies the analytical method by means of contunous flow for the

determination of total alcaloydes in tobbaco products.

Relatedness :National : REV/AMD UNE 118012:2005

Subsector : C11 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036579/0001 Project EstablishedICS :National Ref : PNE 118019Title : TOBACCO AND TOBACCO PRODUCTS. DETERMINATION OF CHLORIDE

CONTENT. POTENCIOMETRIC METHOD.Scope : This UNE standard specifies a potenciometric method for the determination of cloride

content in tobacco products.

Relatedness :National : REV/AMD UNE 118019:2005

** End of Subsector **

Subsector C20: EXPLOSIVES AND FIREWORKS

Subsector : C20 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023650/0001 Project EstablishedICS : 95.020

Page 25

National Ref : ÖNORM S 1205Title : Barrels for small arms - Steels and minimum wall thicknessScope : This ÖNORM specifies requirements for the steel classes, the minimum wall thickness s and

minimum distances w of barrels for small arms in single-barrel and multiple-barrel construction.

Relatedness :National : New

** End of Subsector **

Subsector C99: UNDETERMINED

Subsector : C99 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171369/0001 Project EstablishedICS :National Ref : PR NF T70-715Title : Determination of the Ballistic Mortar Index (TMB)

Relatedness :National : New

Subsector : C99 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171577/0001 Project EstablishedICS :National Ref : PR NF T70-716Title : TNT EQUIVALENTS BY BLAST EFFECT OF EXPLOSIVES

Relatedness :National : New

Subsector : C99 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171578/0001 Project EstablishedICS :National Ref : PR NF T70-368Title : DETERMINATION OF PHYSICAL CHARACTERISTICS BY DSC

Relatedness :National : New

** End of Subsector **

** End of Sector **

Information procedure Page 26

Monthly Notifications Register

Notifications registered at CCMC from 2010-12-01 to 2010-12-31

Sector F : FUNDAMENTAL STANDARDS

Register issued on : 2011-01-14

Page 27Subsector F04: SIEVES

Subsector : F04 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 00515500/0001 Project EstablishedICS :National Ref : 00515500Title : Determination of specific surface area of disperse solids by the permeability technique;

fundamentals

Relatedness :National : New

Subsector : F04 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 00515501/0001 Project EstablishedICS :National Ref : 00515501Title : Determination of specific surface area of disperse solids by the permeability technique;

Blaine method and apparatus

Relatedness :National : New

** End of Subsector **

Subsector F05: MEASURING INSTRUMENTS

Subsector : F05 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 15202112/0001 Project EstablishedICS :National Ref : 15202112Title : Pressure gauges with electrical limit contact devices

Relatedness :National : New

Subsector : F05 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 15202113/0001 Project EstablishedICS :National Ref : 15202113Title : Dial indicating thermometers with electrical limit contact devices; filled system

thermometers and bimetallic-thermometers

Relatedness :National : New

** End of Subsector **

Page 28Subsector F07: DOCUMENTATION AND INFORMATION

Subsector : F07 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 30001000/0001 Project EstablishedICS : 03.100.01National Ref : U30001000Title : Technical information - Professional writing - Editing and evaluation criteriaScope : Thie standard indicates the criteria for the composition of effective professional texts. Its

scope includes both the structured and non structured texts (with or without index and internal partitions), with or without appendixes. Advertising texts, laws, scientific papers, essays and teaching materials and journalistic articles are excluded.

Relatedness :National : New

** End of Subsector **

Subsector F08: SURFACES

Subsector : F08 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171363/0001 Project EstablishedICS :National Ref : PR NF E11-095Title : Length measuring instruments - External micrometer reading in 0,01 mm and 0.001 mm

- Specifications - Test methods

Relatedness :National : New

Subsector : F08 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171563/0001 Project EstablishedICS :National Ref : PR NF E 11-057Title : Geometrical product specification (GPS) - Length measuring instruments - Acceptance

and reverification of mechanical dial gauges with radial retractable stem

Relatedness :National : New

Subsector : F08 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171575/0001 Project EstablishedICS :National Ref : PR NF E11-053Title : Geometrical product specification (GPS) - Dimensional measuring equipment -

Reception and verification of dial test indicator (lever type)

Relatedness :

Page 29

National : New

Subsector : F08 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172029/0001 Project EstablishedICS :National Ref : PR NF E11-157Title : Geometrical product specifications (GPS) - Coordinate measuring machines - Guideline

for the preparation of specifications

Relatedness :National : New

Subsector : F08 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172048/0001 Project EstablishedICS :National Ref : PR NF E11-056Title : Geometrical product specification (GPS) - Dimensional measuring equipment -

Reception and verification of electronic digital dial gauge

Relatedness :National : New

Subsector : F08 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172055/0001 Project EstablishedICS :National Ref : PR NF E02-352Title : Geometrical product specifications (GPS) - Cutted and bended workpieces -

Dimensional and geometrical tolerances for dimensions and features without individual tolerances

Relatedness :National : New

** End of Subsector **

Subsector F12: INFORMATION PROCESSING SYSTEMS

Subsector : F12 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 04300573/0001 Project EstablishedICS :National Ref : 04300573Title : Office machines - Destruction of data carriers - Part 1: principles and definitions

Relatedness :National : New

Page 30

Subsector : F12 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 04300574/0001 Project EstablishedICS :National Ref : 04300574Title : Office machines - Destruction of data carriers - Part 1: Requirements for equipment for

destruction of data carriers

Relatedness :National : New

** End of Subsector **

Subsector F14: GRAPHICAL TECHNOLOGY, SIGN-BOARDS AND NAMEPLATES

Subsector : F14 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023634/0001 Project EstablishedICS : 87.080National Ref : ÖNORM A 1204Title : Testing of prints and printing inks - Resistance to alkalisScope : This Austrian Standard is to be used exclusively for tests on the effects of sodium hydroxide

solution on prints and is applicable for test prints on all printing material carried out with any printing process but also for printing inks on standarised test prints made according to ÖNORM A 1200-1 and -2.

Relatedness :National : New

Subsector : F14 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023636/0001 Project EstablishedICS : 87.080National Ref : ÖNORM A 1206Title : Testing of prints and printing inks - Resistance to detergentsScope : This Austrian Standard is to be used exclusively for tests on the effects of detergents on

prints and is applicable for test prints on all printing material carried out with any printing process but also for printing inks on standarized test prints made according to ÖNORM A 1200-1 and -2.

Relatedness :National : New

Subsector : F14 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023637/0001 Project EstablishedICS : 87.080

Page 31

National Ref : ÖNORM A 1207Title : Testing of prints and printing inks - Resistance to cheeseScope : This Austrian Standard is to be used exclusively for tests on the effects of cheese on prints

and is applicable for test prints on all printing material carried out with any printing process but also for printing inks on standarised test prints made according to ÖNORM A 1200-1 and -2.

Relatedness :National : New

** End of Subsector **

Subsector F15: MATERIAL TESTING IN GENERAL

Subsector : F15 Registration Date : 2010-12-06Organization : BSICountry : United KingdomProject ID : 01003591/0001 Project EstablishedICS :National Ref : BS 9690-1Title : Non-destructive testing. Guided wave examination. Part 1. General principles

Relatedness :National : New

Subsector : F15 Registration Date : 2010-12-06Organization : BSICountry : United KingdomProject ID : 01003592/0001 Project EstablishedICS :National Ref : BS 9690-2Title : Non-destructive testing. Guided wave examination. Part 2. Testing of pipes, pipelines

and structural tubular members

Relatedness :National : New

Subsector : F15 Registration Date : 2010-12-23Organization : UNICountry : ItalyProject ID : 45000990/0002 Project EstablishedICS : 19.100National Ref : U45000990Title : Non-destructive testing - Inspection of aboveground pipelines and plant piping using

long range guided waves with axial propagationScope : The standard is applied for inspection of carbon steel and low alloy steel tubes,

aboveground, using long range guided waves with axial propagation at the aim to find internal/external corrosion and erosion. The standard shall be used for pipes with external diameter between DN 25 and DN 1200, wall thickness between 2 mm and 55 mm and wall temperature between 0 °C and 70 °C, in the following situations (where guided waves test has been applied with consolidated experience): aboveground painted pipelines; aboveground insulated pipelines; road crossings with casing pipe and without bitumen wrapping; painted piping; insulated piping. Other long range guided waves applications, not included in the present standard, can be applied only if a preliminary parts agreement and

Page 32

Scope : a validated procedure are present.

Relatedness :National : New

** End of Subsector **

Subsector F19: OPTICS

Subsector : F19 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 02702365/0001 Project EstablishedICS :National Ref : 02702365Title : Testing of fibre optic elements - Part 11: Determination of photometric characteristics of

side emitting light guides

Relatedness :National : New

** End of Subsector **

Subsector F20: QUALITY ASSURANCE

Subsector : F20 Registration Date : 2010-12-10Organization : AENORCountry : Spain Latest Date for Comments : 2011-01-16Project ID : P0033068/0002 Draft for public enquiryICS :National Ref : PNE 192000-1Title : Common aspects of regulatory inspections. Part 1: Characteristics of the inspector and

inspections performanceScope : Establishes the requirements for individuals acting as inspector in the statutory inspections

in Spanish regulatory industrial safety field

Relatedness :National : New

** End of Subsector **

Subsector F23: ENERGY

Subsector : F23 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023647/0001 Project EstablishedICS : 91.140.10National Ref : ÖNORM H 5055Title : Energy certificate for buildings - Documents relating to the energy certificate - Findings,

expertise, advice and recommendationsScope : This Austrian Standard shall be applied to the establishment of an energy certificate

according to the directive 2002/91/EC and/or 2010/31/EU concerning utilisation areas and/or units in buildings and/or building parts equipped with technical service installations. The energy certificate form includes characteristic values determined on the basis of a calculation. A comparison of this determined energy use with similar buildings or building

Page 33

Scope : parts is therefore.

Relatedness :National : New

Subsector : F23 (Secondary Subsector)

Registration Date : 2010-12-17

Organization : SNCountry : NorwayProject ID : NOT10014/0001 Project EstablishedICS : 91.140.60, 93.020National Ref : prNS 3056Title : Requirements for drilled wells for water supply and energy purposeScope : This standard specifies requirements to drilled well in rock and deposit for - water supply -

energy for cooling and heating. This standard does not comprise observation wells, investigation wells or environmental wells

Relatedness :National : New

Subsector : F23 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036769/0001 Project EstablishedICS :National Ref : PNE 303001 INTitle : The practical implementation of the sustainability criteria for biofuels from the renewable

energy Directive 2009/28/CE in SpainScope : This technical report performs a detailed analysis of the main sustainability certification

schemes in other member states, exploring the extent to which these could be applied to Spain, taking into account the specific characteristics of the spanish biofuels market.

Relatedness :National : New

** End of Subsector **

Subsector F99: UNDETERMINED

Subsector : F99 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036625/0001 Project EstablishedICS :National Ref : PNE 165001Title : Social responsibility. Socially responsible financial products. Requirements for

investment productsScope : This Standard establishes the requirements for investment financial products to be

considered socially responsible

Relatedness :National : New

Page 34

Subsector : F99 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036731/0001 Project EstablishedICS :National Ref : PNE 166006Title : R&D&i management: Technological watch and competitive intelligence systemScope : The aim of this standard is to provide guidelines to establish an effective and efficient

technological surveillance and competitive intelligence management system.

Relatedness :National : REV/AMD UNE 166006:2006 EX

** End of Subsector **

** End of Sector **

Information procedure Page 35

Monthly Notifications Register

Notifications registered at CCMC from 2010-12-01 to 2010-12-31

Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE

Register issued on : 2011-01-14

Page 36Subsector H03: CONSUMER QUESTIONS

Subsector : H03 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036726/0001 Project EstablishedICS :National Ref : PNE 175001-1Title : Service quality for small retail trade. Part 1: General requirementsScope : This UNE standard states requirements for small retail which enable to provide a quality

service

Relatedness :National : REV/AMD UNE 175001-1:2004

** End of Subsector **

Subsector H04: SPORTS EQUIPMENT

Subsector : H04 (Secondary Subsector)

Registration Date : 2010-12-06

Organization : BSICountry : United KingdomProject ID : 01003499/0001 Project EstablishedICS :National Ref : BS 8563Title : Mouthguards for use in sports. Safety requirements and test methods

Relatedness :National : New

** End of Subsector **

Subsector H09: FURNITURE

Subsector : H09 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023638/0001 Project EstablishedICS : 03.060, 13.180National Ref : ÖNORM A 5910Title : Cashier's work-place (Check out) - RequirementsScope : This ÖNORM is to be used for the design and redesign of check outs with consideration of

the conditions at the place of installation.

Relatedness :National : New

** End of Subsector **

Subsector H99: UNDETERMINED

Subsector : H99 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023646/0001 Project Established

Page 37

ICS : 91.010.20, 91.140.01National Ref : ÖNORM H 2210Title : General contract conditions for planning and monitoring of technical equipment in

buildings - Contract to provide servicesScope : This Austrian Standard includes procedural and contractual provisions for the planning and

monitoring of technical equipment in buildings and forms the basis for their award. It contains procedural provisions to complement the Austrian Standard A 2050 "Procurement of works, services and supplies - Notices, tenders and award of contract - Procedural standard". The award is usually based on the negotiated procedure on the basis of the Federal law on public procurement.

Relatedness :National : New

** End of Subsector **

** End of Sector **

Information procedure Page 38

Monthly Notifications Register

Notifications registered at CCMC from 2010-12-01 to 2010-12-31

Sector I : MECHANICAL ENGINEERING

Register issued on : 2011-01-14

Page 39Subsector I01: SCREW THREADS

Subsector : I01 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 15202070/0001 Project EstablishedICS :National Ref : 15202070Title : ISO general purpose metric screw threads - Part 51: External screw threads for

transition fits (former: screw threads for interference fit); tolerances, limit deviations, limits of sizes

Relatedness :National : New

** End of Subsector **

Subsector I02: FASTENERS

Subsector : I02 Registration Date : 2010-12-23Organization : UNICountry : ItalyProject ID : 2404B121/0001 Project EstablishedICS : 21.060.01National Ref : U2404B121Title : Fasteners with particular characteristics - Technical requirements - Part 1: generalitiesScope : This standard is intended to uniquely specify the technical requirements for fasteners with

particular characteristics. It rapresents, only for the provided specifities, the characteristics of the type of fasteners or the special requirements of use.

Relatedness :National : New

Subsector : I02 Registration Date : 2010-12-23Organization : UNICountry : ItalyProject ID : 2404B12D/0001 Project EstablishedICS : 21.060.01National Ref : U2404B12DTitle : Fasteners with particular characteristics – Technical requirements - Part 13 : Tapping

screws for plasticsScope : This standard covers the technical requirements of tapping screws for plastic materials

made of steel with case hardened and tempered, not including alloy and not-alloy steel with special resistance to corrosion and heat. The main purpose is to ensure that the screws properly form the threads in plastic materials in which are screwed, without distortion and without breaking during assembly or service. Tapping screws for plastic materials must be made with thread and ends according to UNI 10225.

Relatedness :National : New

Subsector : I02 Registration Date : 2010-12-23Organization : UNICountry : Italy

Page 40

Project ID : 2404B12E/0001 Project EstablishedICS : 21.060.01National Ref : U2404B12ETitle : Fasteners with particular characteristics - Technical requirements - Part 14 : Thread

forming screws for ISO metric, types and designationScope : This standard specifies the technical requirements, the size and description of the thread

forming screws with ISO metric thread, produced in steel with case hardened and tempered. The main purpose is to ensure that these fasteners forming the thread in the materials where are screwed without producing chip, without deforming their own threads and without breaking during assembly or service. For holes of preparation, see UNI 8108. This standard does not apply to thread cutting and self-drilling screws.

Relatedness :National : New

Subsector : I02 Registration Date : 2010-12-23Organization : UNICountry : ItalyProject ID : 2404B390/0001 Project EstablishedICS : 21.060.01National Ref : U2404B390Title : Thread forming screws - Hole diameters (for thread forming screws)Scope : This standard specifies the size and diameter of holes for thread forming screw followings

UNI 7323-14. Values given are the results of tests conducted both by producers to users. There are no preparation holes diameters for the nominal diameters of 10 and 12 mm thread because sufficient experimental data are currently lacking. The values are determined for different materials and lengths of screwing and should be taken into account as guide values. Non-circular holes are to be avoided.

Relatedness :National : New

Subsector : I02 Registration Date : 2010-12-23Organization : UNICountry : ItalyProject ID : 2404B400/0001 Project EstablishedICS : 21.060.01National Ref : U2404B400Title : Tapping screws for plastics - Screws thread and endsScope : This standard specifies the thread and ends of tapping screws for plastics materials with

nominal dimensions of thread from diameters 2,5 to 7 mm. included. This type of thread is used in plastics materials with thickness reduced because, its particular form, allows a good grip with the minimum thickness of 1 diameter of the screw (see UNI 10231)

Relatedness :National : REV/AMD UNI 10225:1993

Subsector : I02 Registration Date : 2010-12-23Organization : UNICountry : ItalyProject ID : 2404B410/0001 Project EstablishedICS : 21.060.01

Page 41

National Ref : U2404B410Title : Hexagon head tapping screws for plasticsScope : This standard specifies the dimensions and the characteristics of exagon head tapping

screws for plastics materials with nominal diameters from 3,5 to 7 mm. included.

Relatedness :National : REV/AMD UNI 10226:1993

Subsector : I02 Registration Date : 2010-12-23Organization : UNICountry : ItalyProject ID : 2404B420/0001 Project EstablishedICS : 21.060.01National Ref : U2404B420Title : Pan head tapping screws with cross recessed for plasticsScope : This standard specifies the dimensions and che characteristics of pan head tapping screws

with cross recessed for plastics materials with nominal diameters from 2,5 to 7 mm. included.

Relatedness :National : REV/AMD UNI 10227:1993

Subsector : I02 Registration Date : 2010-12-23Organization : UNICountry : ItalyProject ID : 2404B430/0001 Project EstablishedICS : 21.060.01National Ref : U2404B430Title : Countersunk (flat) head tapping screws with cross recessed for plasticsScope : This standard specifies the dimensions and the characteristics of countersunk (flat) head

tapping screws with cross recessed for plastics materials with nominal diameters from 2,5 to 7 mm. included.

Relatedness :National : REV/AMD UNI 10228:1993

Subsector : I02 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 2404B440/0001 Project EstablishedICS : 21.060.01National Ref : U2404B440Title : Hexagon head tapping screws with collar for plasticsScope : This standard specifies the dimensions and the characteristics of hexagon head tapping

screws with collar for plastic materials with nominal diameters from 3,5 to 7 mm. included.

Relatedness :National : REV/AMD UNI 10229:1993

Subsector : I02 Registration Date : 2010-12-23Organization : UNI

Page 42

Country : ItalyProject ID : 2404B450/0001 Project EstablishedICS : 21.060.01National Ref : U2404B450Title : Raised countersunk (oval) head tapping screws with cross recessed for plasticsScope : This standard specifies the dimensions and the characteristics of raised countersunk (oval)

head tapping screws with cross recessed for plastics materials with nominal diametrs from 2,5 to 7 mm. included.

Relatedness :National : REV/AMD UNI 10230:1993

Subsector : I02 Registration Date : 2010-12-23Organization : UNICountry : ItalyProject ID : 2404B460/0001 Project EstablishedICS : 21.060.01National Ref : U2404B460Title : Tapping screws for plastics - Field of application and core holesScope : This standard defines the diameters of core holes and material thickness for applications of

tapping screws for plastic materials. The tapping screws in the present standard are made for application on plastic materials or similar like, for example, alveolar fibrous structure, composite, wood conglomerate, resins, etc.

Relatedness :National : REV/AMD UNI 10231:1993

Subsector : I02 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172038/0001 Project EstablishedICS :National Ref : PR NF E25-726Title : Fasteners - Structural round head rivets

Relatedness :National : New

Subsector : I02 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172051/0001 Project EstablishedICS :National Ref : PR NF E25-030-1Title : Fasteners - Threaded connections - Part 1 : General rules for design, calculation and

mounting

Relatedness :National : New

** End of Subsector **

Subsector I04: ROLLING BEARINGS

Page 43

Subsector : I04 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023649/0001 Project EstablishedICS : 21.100.20National Ref : ÖNORM M 6319-3Title : Rolling bearings - Rolling elements - Part 3: Silicon nitride bearing ballsScope : This ÖNORM defines the dimensional requirements for finished silicon nitride bearing balls.

The values are either given in SI- or in Inch units, whereupon SI units are mandatory. The values given in the several systems are not äquivalent to hundred percent because of conversion and rounding conventions.

Relatedness :National : New

Subsector : I04 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172031/0001 Project EstablishedICS :National Ref : PR NF E22-176Title : KEYING - FORCED ASSEMBLY BY MEANS OF TAPER KEYS - DIMENSIONS

Relatedness :National : New

Subsector : I04 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172032/0001 Project EstablishedICS :National Ref : PR NF E22-175Title : KEYING. ASSEMBLY BY MEANS OF PARRALLEL KEYS. DIMENSIONS

Relatedness :National : New

Subsector : I04 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172033/0001 Project EstablishedICS :National Ref : PR NF E22-177Title : PARALLEL KEYS - DIMENSIONS

Relatedness :National : New

Subsector : I04 Registration Date : 2011-12-29Organization : AFNORCountry : France

Page 44

Project ID : FA172034/0001 Project EstablishedICS :National Ref : PR NF E22-178Title : TAPER KEYS FORCED ASSEMBLY - DIMENSIONS

Relatedness :National : New

Subsector : I04 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172044/0001 Project EstablishedICS :National Ref : PR NF E22-056Title : CYLINDRICAL AND 1/10 CONICAL SHAFT ENDS - INTERNAL THREADS - CENTER

HOLES

Relatedness :National : New

Subsector : I04 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172045/0001 Project EstablishedICS :National Ref : PR NF E22-622Title : MECHANICAL TRANSMISSIONS - PRESSED-ON ASSEMBLIES ON CONICAL

BEARINGS - FUNCTION, REALIZATION, CALCULATION

Relatedness :National : New

Subsector : I04 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172046/0001 Project EstablishedICS :National Ref : PR NF E22-624Title : MECHANICAL TRANSMISSIONS - CONCENTRIC ASSEMBLIES - INFLUENCE OF

SPEED

Relatedness :National : New

Subsector : I04 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172047/0001 Project EstablishedICS :National Ref : PR NF E22-625Title : Mechanical transmissions - Concentric assemblies on cylindrical carried with

intermediate bush with conical external surface - Calculation

Page 45

Relatedness :National : New

** End of Subsector **

Subsector I06: PRESSURE VESSELS

Subsector : I06 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172058/0001 Project EstablishedICS :National Ref : PR NF E86-040Title : Not pressurized tanks - Geometrical and dimensional tolerances

Relatedness :National : New

** End of Subsector **

Subsector I08: AGRICULTURAL MACHINES

Subsector : I08 Registration Date : 2010-12-06Organization : BSICountry : United KingdomProject ID : 01003476/0001 Project EstablishedICS :National Ref : BS 4008:2006+A1Title : Specification for cattle grids. Amendment

Relatedness :National : New

** End of Subsector **

Subsector I12: PULLEYS & BELTS

Subsector : I12 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172028/0001 Project EstablishedICS :National Ref : PR NF T47-076Title : Troughed belt conveyor for bulk products - Cleaning weapers and side flaps used in the

installations of the day - Testing methods

Relatedness :National : New

** End of Subsector **

Subsector I13: GAS CONTAINERS

Subsector : I13 Registration Date : 2010-12-06Organization : BSI Draft Issue Date : 2010-11-11

Page 46

Country : United Kingdom Latest Date for Comments : 2011-01-31

Project ID : 01003545/0001Draft for public

enquiryICS :National Ref : BS 8562Title : Gas cylinders. In-situ examination and testing of refillable seamless steel tubes of water

capacity between 150 L and 3000 L, used for compressed gases. Specification

Relatedness :National : New

** End of Subsector **

Subsector I16: INTERNAL COMBUSTION ENGINES

Subsector : I16 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172049/0001 Project EstablishedICS :National Ref : PR NF E37-504-1Title : Gas turbines - Exhaust gas emission - Partie 1 : Measurement and evaluation

Relatedness :National : New

Subsector : I16 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172050/0001 Project EstablishedICS :National Ref : PR NF E37-504-2Title : Gas turbines - Exhaust gas emission - Partie 2 : Automated emission monitoring

Relatedness :National : New

Subsector : I16 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172056/0001 Project EstablishedICS :National Ref : PR NF E37-211Title : Reciprocating internal combustion engines - Exhaust gas smoke - Definitions and

methods of measurement

Relatedness :National : New

Page 47

Subsector : I16 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172057/0001 Project EstablishedICS :National Ref : PR NF E37-205Title : Reciprocating internal combustion engines - Service classes

Relatedness :National : New

** End of Subsector **

Subsector I18: MINING

Subsector : I18 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 00802208/0001 Project EstablishedICS :National Ref : 00802208Title : Mine plans - Stratigraphy - Teil 1: General classification

Relatedness :National : New

** End of Subsector **

Subsector I20: REFRIGERATION

Subsector : I20 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 04400180/0001 Project EstablishedICS :National Ref : 04400180Title : Cold rooms - construction safety requirements

Relatedness :National : New

** End of Subsector **

Subsector I30: AIR DISTRIBUTION

Subsector : I30 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172062/0001 Project EstablishedICS :National Ref : PR NF E51-713Title : Controlled mechanical ventilation (VMC) components - Extract air terminal devices for

VMC - Characteristics and fitness for purpose

Relatedness :National : New

Page 48

** End of Subsector **

Subsector I40: INDUSTRIAL PIPING NETWORKS

Subsector : I40 Registration Date : 2010-12-17Organization : LVS Draft Issue Date : 2010-12-20Country : Latvia Latest Date for Comments : 2011-01-28Project ID : 00100025/0001 Draft for public enquiryICS : 91.140.40National Ref : prLVS 417Title : Gas distribution and Customer systems - External gas pipelines - DesignScope : The standard defines regulations to be followed in designing the natural gas distribution

systems and the user’s external gas supply system with maximal working pressure of 1,6 MPa (16Bar)

Relatedness :National : REV/AMD LVS 417

Subsector : I40 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172053/0001 Project EstablishedICS :National Ref : PR NF E81-010Title : Punching and stamping - Burr on blanked or punched metallic parts - Maximum

allowable burr height and measuring method

Relatedness :National : New

** End of Subsector **

Subsector I99: UNDETERMINED

Subsector : I99 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036773/0001 Project EstablishedICS :National Ref : PNE 60712-3Title : NON METALLIC FLEXIBLE HOSES WITH ARMOUR AND MECHANICAL

CONNECTION FOR THE UNION OF LPG CONTAINERS TO RECEIVING INSTALLATIONS OR TO APPLIANCES USING GASEOUS FUELS. PART 3: HOSES FOR UNION OF LPG CONTAINERS AND RECEIVING INSTALATIONS OF THE THIRD FAMILY GASES.

Scope : This standard is to define the characteristics, dimensions, specifications and marking of non-metallic flexible hoses , with armour and mechanical connection, with a minimum internal diameter of 6 mm, for the union of containers and receiving installations using the 3rd family gaseous fuels defined in the standard UNE 60002 and whose maximum operating pressure is 20 bar.

Relatedness :National : REV/AMD UNE 60712-3:1998, UNE 60712-3/1M:2000

Page 49** End of Subsector **

** End of Sector **

Information procedure Page 50

Monthly Notifications Register

Notifications registered at CCMC from 2010-12-01 to 2010-12-31

Sector M : METALLIC MATERIALS

Register issued on : 2011-01-14

Page 51Subsector M01: STEEL

Subsector : M01 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172066/0001 Project EstablishedICS :National Ref : PR NF A35-020-1Title : Steel products - Mechanical splices and mechanical anchorages for ribbed or indented

reinforcing steel - Part 1: Requirements for mechanical performances

Relatedness :National : New

Subsector : M01 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172067/0001 Project EstablishedICS :National Ref : PR NF A35-020-2-1Title : Steel products - Mechanical splices and mechanical anchorages for ribbed or indented

reinforcing steel - Part 2-1: Test methods for mechanical splices

Relatedness :National : New

Subsector : M01 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172068/0001 Project EstablishedICS :National Ref : PR NF A35-020-2-2Title : Steel products - Mechanical splices and mechanical anchorages for ribbed or indented

reinforcing steel - Part 2-2: Test methods for mechanical anchorages and weldable couplers

Relatedness :National : New

** End of Subsector **

Subsector M05: WELDING

Subsector : M05 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172030/0001 Project EstablishedICS :National Ref : PR NF A89-410Title : Solderability and brazeability definition and use of a testpiece with variable gap

Relatedness :National : New

** End of Subsector **

Page 52Subsector M08: LIGHT ALLOYS

Subsector : M08 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036732/0001 Project EstablishedICS :National Ref : PNE 38862Title : Titanium and titanium alloys. Determination of iron. Atomic absortion spectrometry.Scope : This standard specfies a method for the determination of iron content in titanium and

titanium alloys.

Relatedness :National : NewInternational : Not Equivalent to ISO 22961:2008

Subsector : M08 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036733/0001 Project EstablishedICS :National Ref : PNE 38864Title : Titanium and titanium alloys. Determination of oxygen. Infrared method after fusion

under inert gas.Scope : This standar specifies an infrared method for the determination of oxygen content in

titanium and titanium alloys

Relatedness :National : NewInternational : Not Equivalent to ISO 22963:2008

** End of Subsector **

Subsector M15: METALLIC CORROSION

Subsector : M15 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 03200555/0001 Project EstablishedICS :National Ref : 03200555Title : Polyethylen coatings of steel pipes and fittings; requirements and testing

Relatedness :National : New

** End of Subsector **

Subsector M99: UNDETERMINED

Subsector : M99 (Secondary Subsector)

Registration Date : 2010-12-17

Organization : SNCountry : NorwayProject ID : NOT10015/0001 Draft for public enquiryICS : 77.140.15National Ref : prNS 3576-2

Page 53

Title : Steel for the reinforcement of concrete - Dimensions and properties - Part 2: Ribbed bars B500NB

Scope : Revsion with focus on requirements to characteristic yield strength and to coils

Relatedness :National : NewEuropean : Not Equivalent to EN 10080

Subsector : M99 (Secondary Subsector)

Registration Date : 2010-12-17

Organization : SNCountry : NorwayProject ID : NOT10015/0001 Draft for public enquiryICS : 77.140.15National Ref : prNS 3576-2Title : Steel for the reinforcement of concrete - Dimensions and properties - Part 2: Ribbed

bars B500NBScope : Revsion with focus on requirements to characteristic yield strength and to coils

Relatedness :National : NewInternational : Not Equivalent to ISO 15630

** End of Subsector **

** End of Sector **

Information procedure Page 54

Monthly Notifications Register

Notifications registered at CCMC from 2010-12-01 to 2010-12-31

Sector N : NON-METALLIC MATERIALS

Register issued on : 2011-01-14

Page 55Subsector N01: PAPER AND BOARD

Subsector : N01 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 07400183/0001 Project EstablishedICS :National Ref : 07400183Title : Testing of paper and board - Determination of the writing properties by ink

Relatedness :National : New

** End of Subsector **

Subsector N03: PETROLEUM PRODUCTS

Subsector : N03 Registration Date : 2010-12-22Organization : NSAICountry : IrelandProject ID : 01078876/0001 Project EstablishedICS : 75.160National Ref : I.S. 251Title : Marked gas oilScope : Revision of I.S. 251:2006. The revised standard introduces classes of marked gas oil for use

in: A) diesel engines and off-road vehicles. B) stationary combustion plant.

Relatedness :National : REV/AMD I.S. 251

Subsector : N03 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 04400178/0001 Project EstablishedICS :National Ref : 04400178Title : Lubricants - Refrigerator oils - Part 2: Used refrigerator oils

Relatedness :National : New

Subsector : N03 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 06233603/0001 Project EstablishedICS :National Ref : 06233603Title : Testing of lubricants - Determination of the content of additive elements - Part 3: Direct

determination of Ca, Mg, Zn and Ba by optical emission spectral analysis with inductively coupled plasma (ICP OES)

Relatedness :National : New

Page 56

Subsector : N03 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 06233604/0001 Project EstablishedICS :National Ref : 06233604Title : Testing of lubricants - Determination of elements content in additives, wear and other

contaminations - Part 1: Direct determination by optical emission spectral analysis with inductively coupled plasma (ICP OES)

Relatedness :National : New

Subsector : N03 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172035/0001 Project EstablishedICS :National Ref : PR NF T60-191Title : Petroleum products and lubricating greases - Oil separation on storage of grease -

Static conditions under pressure

Relatedness :National : New

Subsector : N03 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172036/0001 Project EstablishedICS :National Ref : PR NF T60-190Title : Petroleum products . Roll stability of lubricating grease

Relatedness :National : New

Subsector : N03 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172037/0001 Project EstablishedICS :National Ref : PR NF T60-189Title : Lubricating greases - Leakage tendencies of automotive wheel bearing greases

Relatedness :National : New

Subsector : N03 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172054/0001 Project EstablishedICS :

Page 57

National Ref : PR NF T60-400Title : Stamping lubricants performances

Relatedness :National : New

** End of Subsector **

Subsector N04: REFRACTORIES

Subsector : N04 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 1321D170/0001 Project EstablishedICS : 13.030.99National Ref : E1321D170Title : Plastic materials biodegradable in soil - Types, requirements and test methodsScope : This standard defines the requirements for biodegradability and ecotoxicity that shall meet

the polymers and plastics that are used to prepare products to be used mostly in agriculture that at the end of their use will be left on or in the soil and in this environment will be completely biodegraded without leaving toxic residues in the soil itself. Typical examples of the items that could end life on land, are: plastic films for agricultural use, silage films, ropes and ties to plants and supports for pheromones and in other fields, funeral items ( urns or bags) and hobby items . This standard is not intended to define the ecotoxicity and biodegradation of biodegradable plastics and soluble or dispersible in the aqueous phase, and compostable plastics, both at high temperatures (industrial composting ) or at room temperature (home composting).

Relatedness :National : New

** End of Subsector **

Subsector N06: RUBBER

Subsector : N06 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172039/0001 Project EstablishedICS :National Ref : PR NF T43-112Title : Rubber, raw natural - Colour index test

Relatedness :National : New

** End of Subsector **

Subsector N07: SAWN TIMBER

Page 58

Subsector : N07 (Secondary Subsector)

Registration Date : 2010-12-06

Organization : BSICountry : United KingdomProject ID : 01003478/0001 Project EstablishedICS :National Ref : BS 5756:2007+A1Title : Visual grading of hardwood. Specification

Relatedness :National : New

Subsector : N07 (Secondary Subsector)

Registration Date : 2010-12-06

Organization : BSICountry : United KingdomProject ID : 01003479/0001 Project EstablishedICS :National Ref : BS 4978:2007+A1Title : Visual strength grading of softwood. Specification

Relatedness :National : New

** End of Subsector **

Subsector N09: PLASTICS

Subsector : N09 (Secondary Subsector)

Registration Date : 2010-12-06

Organization : BSICountry : United KingdomProject ID : 01003541/0001 Project EstablishedICS :National Ref : BS 6203Title : Guide to fire characteristics and fire performance of expanded polystyrene materials

(EPS and XPS) used in building applications

Relatedness :National : New

Subsector : N09 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036624/0001 Project EstablishedICS :National Ref : PNE 53938 EXTitle : Plastics. Decorative solid surfacing materials. Determination of properties of the solid

surfacing materials of solid surface sheet or shapesScope : This standard specifies the methods of test for determination of the properties of solid

sufacing materials

Relatedness :National : New

Page 59

** End of Subsector **

Subsector N14: PLASTICS PIPES

Subsector : N14 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 1308D160/0001 Project EstablishedICS : 83.140.30National Ref : E1308D160Title : Steel reinforced spirally formed polyethylene pipes for non pressure underground

drainage and sewerageScope : This standard is applicable to spirally formed polyethylene pipes reinforced with a steel

component completely embedded into the wall of the pipe and with a smooth inner surface. The field of application is: sewerages,rainwaters,ventilation pipeworks, marked with the area code U The manufacturing process is the helical winding The pipes are joined by coupler,socket and spigot systems or by welding The ring stiffness for a 3 % diametric deflection is from S8 up to S16 The range of the diameters (DN/ID) is from 400 to 2500 mm

Relatedness :National : New

** End of Subsector **

** End of Sector **

Information procedure Page 60

Monthly Notifications Register

Notifications registered at CCMC from 2010-12-01 to 2010-12-31

Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT

Register issued on : 2011-01-14

Page 61Subsector S01: ACOUSTICS AND SOUND INSULATION

Subsector : S01 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 20002120/0001 Project EstablishedICS : 13.140National Ref : U20002120Title : Acoustics - Measurement of percentile sound levelsScope : This Standard defines the proper instruments and the assessment criteria and methods for

the measurement of sound percentile levels.This Standard shall be applied for the measurement and evaluation of sound percentile levels associated with vehicular traffic and for an estimation of specific sound sources effects, in the presence of background noise.

Relatedness :National : New

Subsector : S01 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 20002150/0001 Project EstablishedICS : 91.120.20National Ref : U20002150Title : Building acoustics - Acoustic classification of building units - Applications of the UNI

11367 for not serial building systemsScope : This Technical Report is a complement of UNI 11367 standard, concerning the acoustic

classification of not serial building systems, i.e. systems made up of an ensemble of units property that mostly present different technical features. This Technical Report gives indications on the test sampling used in checking the fulfilment of requirements for each performance indicator applicable to single rooms and, whenever possible, to the whole housing UNI.

Relatedness :National : New

** End of Subsector **

Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT

Subsector : S04 Registration Date : 2010-12-06Organization : BSICountry : United KingdomProject ID : 01003499/0001 Project EstablishedICS :National Ref : BS 8563Title : Mouthguards for use in sports. Safety requirements and test methods

Relatedness :National : New

Page 62

Subsector : S04 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 02702366/0001 Project EstablishedICS :National Ref : 02702366Title : Eye and face proctection against arc flash

Relatedness :National : New

** End of Subsector **

Subsector S06: VIBRATION & SHOCK

Subsector : S06 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 20002160/0001 Project EstablishedICS : 17.160National Ref : U20002160Title : Vibration measurement in buildings and annoyance evaluationScope : This standard provides a guide for the choice of appropriate methods of measurement,

data processing and evaluation of vibration phenomena and their effect on buildings, with particular reference to their impact on the structure and architectural integrity.

Relatedness :National : REV/AMD UNI 9614:1990

Subsector : S06 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 20002170/0001 Project EstablishedICS : 17.160National Ref : U20002170Title : Criteria for the measurement of vibrations and the assessment of their effects on

buildings Scope : This standard provides a guide for the choice of appropriate methods of measurement,

data processing and evaluation of vibration phenomena and their effect on buildings, with particular reference to their impact on the structure and architectural integrity.

Relatedness :National : REV/AMD UNI 9916:2004

Subsector : S06 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 20002190/0001 Project EstablishedICS : 17.160National Ref : U20002190Title : Vibraztions - Instrumentation and analysis for vibration measurementsScope : This Standard, organised in parts, provides general recommendations concerning the

metrological, methodological and instrumental aspects of vibration measurements and

Page 63

Scope : analysis. It deals with all instruments and methods relevant to vibration measurements, except for the cases covered by specific Standards. To this Standard reference is to be made in the case of: * choice of suitable equipment and methods (instrumentation, measurements and data process-ing); * evaluation of method uncertainty and, consequently, of measure reliability; * as far as instruments are concerned, the criteria for testing specification. This Standard applies in those vibration measurements for which a specific Standard is not available or mandatory. The Part 1 of this Standard considers the choice and use of the transducers.

Relatedness :National : New

** End of Subsector **

Subsector S09: WATER QUALITY AND WATER SUPPLY

Subsector : S09 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023640/0001 Project EstablishedICS : 13.060.20, 23.040.01, 91.140.60National Ref : ÖNORM B 5014-1Title : Sensory and chemical requirements and testing of materials in contact with drinking

water - Part 1: Organic materialsScope : This ÖNORM includes the hygienic demands for materials in the contact with water for the

human consumption. This part of the ÖNORM is to be applied to organic materials or of these materials made plant components, as far as they get into contact with drinking water and hot water.

Relatedness :National : New

Subsector : S09 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023641/0001 Project EstablishedICS : 13.060.20, 23.040.01, 91.140.60National Ref : ÖNORM B 5014-2Title : Sensory and chemical requirements and testing of materials in contact with drinking

water - Part 2: Cementitous materialsScope : This ÖNORM includes the hygienic demands for materials in the contact with water for the

human consumption. This part of the ÖNORM is to be applied to cementious materials or of these materials made plant components, as far as they get into contact with drinking water.

Relatedness :National : New

Subsector : S09 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023642/0001 Project EstablishedICS : 13.060.20, 23.040.01, 91.140.60National Ref : ÖNORM B 5014-3

Page 64

Title : Sensory and chemical requirements and testing of materials in contact with drinking water - Part 3: Metalic materials

Scope : This ÖNORM includes the hygienic demands for materials in the contact with water for the human consumption. This part of the ÖNORM is to be applied to metalic materials or of these materials made plant components, as far as they get into contact with drinking water and hot water.

Relatedness :National : New

Subsector : S09 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023658/0001 Project EstablishedICS : 13.060.20, 23.040.01, 91.140.60National Ref : ONR 25014-3Title : List of hygienically suitable metalic materials for pipes in contact with drinking water -

Complementary provisions to ÖNORM B 5014-3Scope : This ONR includes a list of metallic materials, which are suitable for the hygienic demands

of materials for drinking water for human consumption.

Relatedness :National : New

Subsector : S09 Registration Date : 2010-12-17Organization : SNCountry : NorwayProject ID : NOT10014/0001 Project EstablishedICS : 91.140.60, 93.020National Ref : prNS 3056Title : Requirements for drilled wells for water supply and energy purposeScope : This standard specifies requirements to drilled well in rock and deposit for - water supply -

energy for cooling and heating. This standard does not comprise observation wells, investigation wells or environmental wells

Relatedness :National : New

** End of Subsector **

Subsector S15: SURGICAL INSTRUMENTS

Subsector : S15 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 02702347/0001 Project EstablishedICS :National Ref : 02702347Title : Medical instruments; Scissors type Mayo without carbide inserts

Relatedness :National : New

Page 65

Subsector : S15 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 02702348/0001 Project EstablishedICS :National Ref : 02702348Title : Medical instruments; bandage scissors, Smith's, straight

Relatedness :National : New

Subsector : S15 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 02702349/0001 Project EstablishedICS :National Ref : 02702349Title : Medical instruments; bone shears

Relatedness :National : New

Subsector : S15 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 02702350/0001 Project EstablishedICS :National Ref : 02702350Title : Medical instruments; tongue forceps, type Young

Relatedness :National : New

Subsector : S15 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 02702351/0001 Project EstablishedICS :National Ref : 02702351Title : Medical instruments; McKenzie's instruments for brain clips, clips applying

Relatedness :National : New

Subsector : S15 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 02702352/0001 Project EstablishedICS :National Ref : 02702352Title : Medical instruments - McKenzie's instruments for brain clips - Clips and fitting

Page 66

Title : dimensions

Relatedness :National : New

Subsector : S15 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 02702353/0001 Project EstablishedICS :National Ref : 02702353Title : Medical instruments - Needle holder type Mayo-Hegar without carbide inserts

Relatedness :National : New

Subsector : S15 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 02702354/0001 Project EstablishedICS :National Ref : 02702354Title : Medical instruments - Resection knives type Langenbeck

Relatedness :National : New

** End of Subsector **

Subsector S19: FIRST AID EQUIPMENT AND RESCUE SYSTEMS

Subsector : S19 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 05300336/0001 Project EstablishedICS :National Ref : 05300336Title : Rescue Systems - Intensive care vehicle - Definitions, requirements, testing

Relatedness :National : New

** End of Subsector **

Subsector S20: WASTE COLLECTION, HANDLING AND TRANSPORTATION

Subsector : S20 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023651/0001 Project EstablishedICS : 13.030.30, 83.140.99National Ref : ÖNORM S 2073Title : Landfills - Polymer membrane liners - Requirements and tests

Page 67

Scope : On the basis of ÖNORM EN 13493 and taking into account the specific geological conditions at a national level, this ÖNORM defines requirements for the characteristics of thermoplastic liners used for sealing landfill structures and having a minimum useful life of more than 25 years.

Relatedness :National : New

Subsector : S20 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023652/0001 Project EstablishedICS : 13.030.40, 59.080.70National Ref : ÖNORM S 2076-2Title : Landfills - Geotextile protection layers - Part 2: System requirements and conditions for

installationScope : On the basis of ÖNORM EN 13257 and taking into account the specific geological

conditions at a national level (in accordance with Table 2), this Austrian Standard (ÖNORM) defines requirements for the characteristics of geotextile protection layers having a minimum useful life of more than 25 years. It is also applicable to the proper installation, conditions for installation and the protection of polymer membrane liners used for sealing landfills.

Relatedness :National : New

Subsector : S20 Registration Date : 2010-12-13Organization : ASICountry : Austria

Project ID : 00023653/0001Project

Established

ICS :13.030.40, 83.140.10, 91.080.40, 93.020

National Ref : ÖNORM S 2077-1Title : Plastic sealings of concrete buildings - Concrete protective liners - Part 1: Requirements

and testing Scope : The present ÖNORM standard describes the requirements and test methods as well as

quality assurance measures for concrete protective liners (CPLs). Sealings made by means of CPLs are considered to be structural, homogeneous concrete protection measures with a positive connection for the corrosion proofing and sealing of concrete buildings in all those cases in which solid, liquid or gaseous (e.g. radon) media occur on the side of the sealing and elevated operational stress exists, for example, because of: the occurrence of water-polluting liquids (e.g. leachate from landfills), abrasion, the risk of concrete corrosion, stress distribution (higher tension in the case of temperature changes), pressure alternation (alternating push/pull action).

Relatedness :National : New

Subsector : S20 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023654/0001 Project Established

Page 68

ICS : 13.030.40, 83.140.99National Ref : ÖNORM S 2081-1Title : Landfills - Sealing systems with geosynthetic clay barriers (GBR-C) - Part 1:

Requirements and tests Scope : This Austrian Standard specifies requirements for geosynthetic clay liners (GBR-C) for the

sealing of landfill structures on the basis of ÖNORM EN 13493 and subject to the special geo-strategic situation at the national level set.

Relatedness :National : New

Subsector : S20 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023656/0001 Project EstablishedICS : 13.030.40, 83.140.99National Ref : ÖNORM S 2081-2Title : Landfills - Sealing systems with geosynthetic clay barriers (GBR-C) - Part 2: InstallationScope : This Austrian Standard applies for the professional installation and quality assurance for the

relocation of GBR-C for landfill liners according to ÖNORM S 2081-1.

Relatedness :National : New

** End of Subsector **

Subsector S99: UNDETERMINED

Subsector : S99 Registration Date : 2010-12-06Organization : BSICountry : United KingdomProject ID : 01003568/0001 Project EstablishedICS :National Ref : BS 1922:1987+A2Title : Specification for glass dispensing measures for pharmaceutical purposes. Amendment

Relatedness :National : New

Subsector : S99 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA171450/0001 Project EstablishedICS :National Ref : NFX30-503Title : Healthcare waste - Reduction by disinfection pretreatment appliances in microbiological

and mechanical risks involving infections and other comparable healthcare waste

Relatedness :National : New

Subsector : S99 Registration Date : 2011-12-29Organization : AFNOR

Page 69

Country : FranceProject ID : FA171451/0001 Project EstablishedICS :National Ref : NFX30-500Title : Packaging for medicinal care waste - Boxes and small collectors for perforating waste -

Specifications and tests

Relatedness :National : New

Subsector : S99 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172069/0001 Project EstablishedICS :National Ref : PR NF S97-114Title : Medical compression hosiery . Technical specifications

Relatedness :National : New

** End of Subsector **

** End of Sector **

Information procedure Page 70

Monthly Notifications Register

Notifications registered at CCMC from 2010-12-01 to 2010-12-31

Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING

Register issued on : 2011-01-14

Page 71Subsector T03: ROAD VEHICLES

Subsector : T03 Registration Date : 2010-12-13Organization : ASICountry : AustriaProject ID : 00023657/0001 Project EstablishedICS : 01.040.13, 03.220.20, 13.200National Ref : ÖNORM V 5050Title : Traffic-accident and vehicle damage - TerminologyScope : This ÖNORM specifies the used terms and definitions for description in the event of the

accident and is used for the standardization of operational sequences.

Relatedness :National : New

** End of Subsector **

Subsector T07: GLASS CONTAINERS

Subsector : T07 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036774/0001 Project EstablishedICS :National Ref : PNE 126101Title : Glass containers. Glass terminology. General.Scope : IT ESTABLISHES THE DEFINITIONS CONCERNING GLASS PACKAGE, THE OUTLINE AND

DENOMINATIONS OF THEIR PARTS AS WELL THE STANDARD ALLOWANCES FOR GLASS BOTTLES.

Relatedness :National : New

Subsector : T07 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036775/0001 Project EstablishedICS :National Ref : PNE 126102Title : Glass containers. Glass terminology. Dimensional relationships for a normal glass

container.Scope : IT SPECIFIES THE DIMENSIONAL CHARACTERISTICS FOR A NORMAL GLASS CONTAINER.

Relatedness :National : New

Subsector : T07 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036776/0001 Project EstablishedICS :National Ref : PNE 126407Title : Glass containers. Mouths. Mouth profiles for non refillable fitment.Scope : This UNE Standard specifies the dimensional, geometrical and manufacturing

Page 72

Scope : characteristiques with its respective tolerances for the mouth profiles destined to non refillable fitment.

Relatedness :National : New

** End of Subsector **

Subsector T13: LIFTING CHAINS, HOOKS AND ROPES

Subsector : T13 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172059/0001 Project EstablishedICS :National Ref : PR NF E52-109-1Title : Lifting and handling - Welded joints. Part 1 : fabrication

Relatedness :National : New

Subsector : T13 Registration Date : 2011-12-29Organization : AFNORCountry : FranceProject ID : FA172060/0001 Project EstablishedICS :National Ref : PR NF E52-109-2Title : Lifting and handling - Welded joints - Part 2 : Weld quality classes - Extent of the non-

destructive testing

Relatedness :National : New

** End of Subsector **

Subsector T14: PACKAGING

Subsector : T14 (Secondary Subsector)

Registration Date : 2010-12-06

Organization : BSICountry : United KingdomProject ID : 01003568/0001 Project EstablishedICS :National Ref : BS 1922:1987+A2Title : Specification for glass dispensing measures for pharmaceutical purposes. Amendment

Relatedness :National : New

Subsector : T14 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 11500844/0001 Project EstablishedICS :

Page 73

National Ref : 11500844Title : Transportation loads - Data collection of dynamic mechanical loads - Part 2: Collection

of data

Relatedness :National : New

** End of Subsector **

Subsector T16: LIFTS & ESCALATORS

Subsector : T16 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 85000451/0001 Project EstablishedICS : 91.140.90National Ref : U85000451Title : Modification of existing electric liftsScope : This standard specifies the state-of-the-art criteria for modifying or replacing parts of

electric lifts complying with standards issued before the UNI EN 81-1 standard in conformity with the legislation in force.

Relatedness :National : REV/AMD UNI 10411-1:2008

Subsector : T16 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 85000452/0001 Project EstablishedICS : 91.140.90National Ref : U85000452Title : Modification of existing electric liftsScope : This standard specifies the state-of-the-art criteria for modifying or replacing parts of

hydraulic lifts complying with standards issued before the UNI EN 81-2 standard in conformity with the legislation in force

Relatedness :National : REV/AMD UNI 10411-2:2008

** End of Subsector **

Subsector T19: ROAD SAFETY

Subsector : T19 Registration Date : 2010-12-08Organization : LVS Draft Issue Date : 2010-12-16Country : Latvia Latest Date for Comments : 2011-02-09Project ID : 01500021/0001 Project EstablishedICS : 93.080National Ref : prLVS 190-5Title : Road design specifications. Part 5: SubgradeScope : The standard specifies the requirements existing subgrade

Relatedness :National : REV/AMD LVS 190-5

Page 74

Subsector : T19 Registration Date : 2010-12-08Organization : LVS Draft Issue Date : 2010-12-16Country : Latvia Latest Date for Comments : 2011-02-09Project ID : 01500022/0001 Project EstablishedICS : 93.080National Ref : prLVS 94Title : Road restraint systems, vehicle restraint systems, safety barriers, applicationScope : This standard specifies application rules of safety barriers

Relatedness :National : REV/AMD LVS 94

Subsector : T19 Registration Date : 2011-12-27Organization : UNICountry : ItalyProject ID : 71011670/0001 Project EstablishedICS :National Ref : U71011670Title : Guideline for the definition of the technical-functional requirements of the vertical road

traffic signs (fixed and temporary) for UNI EN 12899-1:2008 applicationScope : The guideline is elaborated in order to enable the Road authorities to edit a specification

(technical) for the vertical traffic signs section conforms to the standards and to allow the standard application regarding the Regulation of implementation and of accomplishment of the new road code, of the applicatory decrees, of the newsletters and in the recent UNI standard and UNI EN in the safety road field.

Relatedness :National : New

Subsector : T19 Registration Date : 2010-12-10Organization : AENORCountry : Spain Latest Date for Comments : 2011-01-16Project ID : P0016030/0002 Draft for public enquiryICS :National Ref : PNE 199031-2Title : Road marking equipment. Data capture stations. Part 2: Electromagnetic compatibility

for data capture stations.Scope : This standard define the limits and test methods to be applied to the traffic data capture

stations in relation with the electromagnetic emissions and immunity. Its applicable to equipments used in traffic control applications..

Relatedness :National : New

Subsector : T19 Registration Date : 2010-12-10Organization : AENORCountry : Spain Latest Date for Comments : 2011-01-16Project ID : P0019030/0002 Draft for public enquiryICS :National Ref : PNE 199031-4Title : Road marking equipment. Data capture stations. Part 4: Test methodsScope : This standard defines the test methods to be applied on traffic data capture stations. It

Page 75

Scope : contains the environment and functional test to be passed by the traffic data capture stations for electric tests.

Relatedness :National : New

Subsector : T19 Registration Date : 2010-12-02Organization : AENORCountry : SpainProject ID : P0036710/0001 Project EstablishedICS :National Ref : PNE 199051-2Title : Traffic management equipment. Variable message signs. Part 2: Communication

protocolScope : This document provides recommendations and defines requirements about the

communication protocol of the variable message signs (PMV) to be used in the Spanish road infrastructures network

Relatedness :National : New

** End of Subsector **

Subsector T20: TRAM- AND RAILWAY ENGINEERING

Subsector : T20 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 08700809/0001 Project EstablishedICS :National Ref : 08700809Title : State of railway vehicles - Passenger area - Part 1: Entrance doors - Type of

construction: Folding doors

Relatedness :National : New

Subsector : T20 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 08700810/0001 Project EstablishedICS :National Ref : 08700810Title : State of railway vehicles - Passenger area - Part 2: Entrance doors - Type of

construction: Folding hinged doors

Relatedness :National : New

Page 76

Subsector : T20 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 08700811/0001 Project EstablishedICS :National Ref : 08700811Title : State of railway vehicles - Passenger area - Part 3: Entrance doors - Type of

construction: Sliding plug doors

Relatedness :National : New

Subsector : T20 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 08700812/0001 Project EstablishedICS :National Ref : 08700812Title : State of railway vehicles - Passenger area - Part 4: Entrance doors - Type of

construction: Sliding doors

Relatedness :National : New

Subsector : T20 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 08700813/0001 Project EstablishedICS :National Ref : 08700813Title : State of railway vehicles - Passenger area - Part 5: Entrance doors - Type of

construction: Swinging doors

Relatedness :National : New

Subsector : T20 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 08700814/0001 Project EstablishedICS :National Ref : 08700814Title : State of railway vehicles - Passenger area - Part 6: End doors/doors between coaches -

Type of construction: Folding doors, sliding doors, roller loading doors, hinged doors

Relatedness :National : New

Page 77

Subsector : T20 Registration Date : 2010-12-21Organization : DINCountry : GermanyProject ID : 08700815/0001 Project EstablishedICS :National Ref : 08700815Title : State of railway vehicles - Passenger area - Part 7: Loading doors - Type of

construction: Sliding plug doors, sliding doors, roller loading doors, folding doors

Relatedness :National : New

** End of Subsector **

** End of Sector **

Information procedure Page 78

Monthly Notifications Register

Notifications registered at CCMC from 2010-12-01 to 2010-12-31

Sector Z : INFORMATION TECHNOLOGY

Register issued on : 2011-01-14

Page 79Subsector Z99: UNDETERMINED

Subsector : Z99 Registration Date : 2010-12-10Organization : AENORCountry : Spain Latest Date for Comments : 2011-01-06Project ID : P0034415/0002 Draft for public enquiryICS :National Ref : PNE 71510Title : Applications with the Spanish DNIe. Electronic signature creation and verification. Type

1 for IT platforms that allow an exclusive control of signer's interfaces, and with a Evaluation Assurance Level «EAL1».

Scope : This document establishes the functional security requirements for the advanced electronic signature creation and verification applications for IT platforms using the electronic Spanish DNI as the secure device to fulfil the conformity security requirements to determinate the compliance of the application with the evaluation assurance level EAL1 of Security Common Criteria Specifications

Relatedness :National : New

Subsector : Z99 Registration Date : 2010-12-10Organization : AENORCountry : Spain Latest Date for Comments : 2011-01-06Project ID : P0034416/0002 Draft for public enquiryICS :National Ref : PNE 71511Title : Applications with the Spanish DNIe. Electronic signature creation and verification. Type

1 for IT platforms that allow an exclusive control of signer's interfaces, and with a Evaluation Assurance Level «EAL3»

Scope : This document establishes the functional security requirements for the advanced electronic signature creation and verification applications for IT platforms using the electronic Spanish DNI as the secure device to fulfil the conformity security requirements to determinate the compliance of the application with the evaluation assurance level EAL3 of Security Common Criteria Specifications

Relatedness :National : New

** End of Subsector **

** End of Sector **

2010-12

List of non-electrotechnical subsectors

Sector A: Services

Subsector Title ISO/TC CEN/TC

reference reference

A01 Tourist services / 329; CEN/WS ETO

A02 Cleaning services / 328

A03 Postal services / 331

A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM

A05 Maintenance services / 319

A06 Building and construction services / 330

A07 Translation services /

A08 Funeral services / CEN/BT/TF 139

A09 Facility management / 348

A10 Services of Real Estate Agents / CEN/BT/TF 180; 373

A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4

A12 Consultancy Services / 395; 381

A13 Expertise Services / 405

A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

Sector B: Building and construction

Subsector Title ISO/TC CEN/TC

reference reference

B01 Fire protection 21 70; 72; 191; 192

B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340

B03 Concrete 71 104; CEN/WS 009

B04 Cement 74; 77 51

B05 Fire tests 92 127

B06 Gypsum / 241

B07 Glass 160 129

B08 Doors and windows 162 33

B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036

B10 Timber structures 165 124

B11 Metal structures 167 135

B12 Masonry 179; 196 125; 246

B13 Solar energy 180 312

B14 Geotechnics 182 341; 396

B15 Sanitary appliances / 163; 7

B16 Taps / /

B17 Lighting equipment and lighting / 50; 169 application technology

B18 Scaffolding / 53

B19 Ceramic tiles 189 67

B20 Drainage equipment / 165

B21 Baths / /

B22 Wallcoverings / 99

B23 District heating / 107

B24 Auxiliary and handicraft work / /

B25 Gas distribution installation and / 234; 235; 282 related equipment

B26 Road building and maintenance / 178; 227

B27 Waterproofing materials / 128; 254; 361; 314

B28 Floor coverings 38/SC 12 134

B29 Aggregates / 154

B30 Floor and surfacing / 217; 303; 323; 390

B31 Heating systems in buildings / 228; 247

B32 Precast concrete products / 177; 229

B33 Building design 205 315; 325; 388

B34 Building and construction – Environmental aspect 350; 351

B99 Undetermined / /

Sector C: Chemicals, chemical engineering and food products

Subsector Title ISO/TC CEN/TC

reference reference

C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054

C02 Paints and related products 35 139; 298; 173

C03 Chemistry 47 317; 363

C04 Laboratory glassware 48 332

C05 Lac / /

C06 Essential oils 54 /

C08 Pesticides 81 /

C09 Surfactants 91 276

C10 Starch 93 /

C11 Tobacco 126 401

C12 Glass plant / /

C13 Fertilizers 134 223; 260

C16 Wood preservatives / /

C17 Trees and plants / /

C18 Adhesives / 193

C19 Chemical analysis 201; 202 382; 347

C20 Explosives and firework / 212; 321

C21 Cosmetics 217 392

C99 Undetermined / 386

Sector F: Fundamental standards

Subsector Title ISO/TC CEN/TC

reference reference

F01 Technical drawings 10 /

F02 Units & symbols 12 /

F03 Preferred numbers 19 /

F04 Sieves 24 /

F05 Measuring instruments 30; 113 92; 171; 176; 237;

294; 318; 244; 367; 141; CEN/WS 011

F06 Terminology principles 37 /

F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368

F08 Surfaces / 290

F09 Banking 68 /

F10 Statistics 69 /

F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365

F13 Environmental tests / /

F14 Graphical technology, 130 / sign-boards and nameplates

F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033

F16 Graphical symbols 145 /

F17 Administrative documents 154 CEN/WS MMU

F18 Micrographics 171 /

F19 Optics 172; 187 123; 170

F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362

F21 Value analysis and project / 279 network

F22 Logistics / 379; 273

F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027

F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

Sector H: Products for household and leisure use

Subsector Title ISO/TC CEN/TC

reference reference

H01 Cinematography 36 372

H02 Photography 42 /

H03 Consumer questions / 291

H04 Sports equipment 83 136

H05 Oil and gas burners / 47; 131

H06 Horology 114 /

H07 Space heating 116 62; 110; 130; 179; 180

H08 Sizing systems 133; 137 /

H09 Furniture 136 207

H10 Sewing machines 148 /

H11 Heater controls 161 58

H12 Ceramic and glass-ware for food 166 /

H13 Jewellery 174 CEN/WS 047

H14 Caravans 177 245

H15 Toys 181 52

H17 Oil stoves / 46

H18 Central heating boilers / 48; 57; 109; 269

H19 Non-electric cookers and barbecues / 49; 281; 295

H22 Smokers’ lighters and matches / 355; 87

H23 Ladders / 93

H24 Tactile danger warnings / /

H25 Large gas appliances / 106; CEN/CLC/JWG FCGA

H26 Sealing materials / 108; 208

H27 Educational equipment / /

H28 Hunting 191 /

H29 Heat pumps / 113

H30 Equipment for children / 252

H31 Dedicated LPG appliances / 181

H32 Culinary utensils 186 194

H33 Footwear (excluding protective / 309 footwear)

H34 Child safety / CEN/BT/WG 117 398

H99 Undetermined / 299; 364; 369; 402

Sector I: Mechanical engineering

Subsector Title ISO/TC CEN/TC

reference reference

I01 Screw threads 1 /

I02 Fasteners 2 185

I03 Limits & fits / /

I04 Rolling bearings 4 /

I05 Iron pipes 5 203

I06 Pressure vessels 11 54

I07 Shafts 14 /

I08 Agricultural machines 23 144, 334

I09 Small tools 29 213

I10 Splines / /

I11 Machine tools 39 142; 143; 145; 255

I12 Pulleys & belts 41 188

I13 Gas containers 58 23; 286

I14 Gears 60 /

I15 Equipment for petroleum industry 67 12

I16 Internal combustion engines 70; 192 270

I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025

I18 Mining 82 196

I19 Nuclear energy 85 /

I20 Refrigeration 86 44; 182

I21 Chains and chain wheels 100 /

I22 Vacuum technology 112 /

I23 Pumps 115 197

I24 Industrial fans 117 356

I25 Compressors 118 232

I26 Plain bearings 123 /

I27 Earth moving and construction 127; 195 151 equipment

I28 Fluid power 131 /

I29 Gas cleaning / 195

I30 Air distribution / 156

I31 Valves 153; 185 69; 236; 105

I32 Flanges / 74

I33 Information processing in 184 310 automation

I34 Non-ferrous metallic pipes / /

I35 Leisure and recreational machines / 152

I36 Thermoprocessing technology / 186

I37 Printing and paper machines / 198

I38 Leather production, tannery and / 200; 201 related machinery

I39 Machines for metal processing / 202; 322

I40 Industrial piping networks / 267

I41 Membrane filters / 272

I42 Potentially explosive atmospheres / 305

I43 Hydrogen energy 197 /

I44 Nanotechnologies 229 352

I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

Sector M: Metallic materials

Subsector Title ISO/TC CEN/TC

reference reference

M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110

M02 Zinc / 209

M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron

M04 Copper 26 133

M05 Welding 44 121

M06 Dimensions of wrought products / /

M07 Manganese and chromium 65 /

M08 Light alloys 79 132

M09 Iron ores 102 /

M10 Metallic coatings 107 240

M11 Powder metallurgy 119 /

M12 Aluminium ores 129 /

M13 Ferroalloys 132 /

M14 Nickel 155 /

M15 Metallic corrosion 156 262; 219

M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101

M17 Heavy metal ores 183 /

M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378

M20 Tin and tin alloys / 220

M21 Precious metals / 283

M22 Lead and lead alloys / 306

M99 Undetermined / /

Sector N: Non-metallic materials

Subsector Title ISO/TC CEN/TC

reference reference

N01 Paper and board 6 172

N02 Solid fuels 27 335; 343;383; CEN/WS 019

N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061

N04 Refractories 33 187

N05 Textiles 38 189; 248

N06 Rubber 45 218; 366 CEN/WS 003

N07 Sawn timber 55 38; 175

N08 Mica / /

N09 Plastics 61 249

N10 Cork 87 /

N11 Wood-based panels 89 112

N12 Timber products 99 /

N13 Leather 120 289

N14 Plastics pipes 138 155

N17 Fluorspar 175 /

N18 Glass-fibre reinforced plastics / /

N19 Tapes / 253

N20 Ceramics 206 184

N21 Gaseous fuels and combustible gas 158; 193 238

N22 Feather and related materials / 222

N99 Undetermined / /

Sector S: Health, environment and medical equipment

Subsector Title ISO/TC CEN/TC

reference reference

S01 Acoustics and sound 43 126; 211 insulation

S02 Transfusion equipment 76 /

S03 Syringes 84 /

S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043

S05 Dentistry 106 55

S06 Vibration & shock 108 231

S07 Anaesthetic and respiratory 121 215 equipment

S08 Air quality 146 137; 243; 264; CEN/CLC WG/CMI

S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034

S10 Surgical implants 150 285; CEN/CLC/JWG AIMD

S11 Contraceptives 157 /

S12 Gas analysis / /

S13 Ergonomics 159 122

S14 Prosthetics 168 /

S15 Surgical instruments 170 /

S16 Aids for the disabled 173 293

S17 Respiratory protective devices / 79

S18 Sterilization of equipment 198 102; 204

S19 First aid equipment and rescue systems / 239

S20 Waste collection, handling and / 183 transportation

S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055

S22 Energy saving / CEN/WS 005 CEN/WS 015

S23 Personal & property protection against aggression/Burglary protection / 263

S24 Soil quality 190 345; CEN/WS 032

S25 Chemical disinfectants and / 216 antiseptics

S26 Environmental management 207 CEN/TC 406; CEN/WS 040

S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120

S28 Demining / CEN/WS 029 CEN/WS 013

S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; 403 CEN/WS PCEC CEN/WS 012 CEN/WS 020

Sector T: Transport, mechanical handling and packaging

Subsector Title ISO/TC CEN/TC

reference reference

T01 Shipbuilding and maritime 8; 188 15; 300 structures

T02 Aerospace 20 274; AECMA; ECSS ;377

T03 Road vehicles 22 301; 326 CEN/WS IMA

T04 Tyres 31 /

T05 Pallets 51 /

T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393

T07 Glass containers 63 /

T08 Cranes 96 147

T09 Materials handling and 101 148; 149 storage equipment

T10 Freight containers 104 119; 280

T11 Steel wire ropes 105 /

T12 Industrial trucks 110 150; 324

T13 Lifting chains, hooks and ropes 111 168

T14 Packaging 122 261; 120

T15 Cycles 149 333

T16 Lifts & escalators 178 10; 242

T17 Builders hoists / /

T18 Elevating platforms / 98

T19 Road safety / 226; 339

T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR

T21 Packaging machines / 146

T22 Off-road vehicles / 354

T99 Undetermined / CEN/WS TAF

Sector Z: Information technology

Subsector Title ISO/TC CEN/TC

Z01 Radiocommunication for IT / /

Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI

Z03 Common O.S.I. activities / CEN/CLC - EWOS

Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

CEN/WS XFS; CEN/WS XML; CEN/WS eGo; CEN/WS eIN; CEN/WS ePR