hup er vision 32 chin stall

8/13/2019 Hup Er Vision 32 Chin Stall

1/14

32CH DVR System Installation Guide

- 1 - 1/9/2007

32-Channel DVR System Installation Guide

I. System Requirements DVR Software Version huperVision 4000 v1.12 only Hardware Requirements1. Dual monitors2. VGA card with dual display support (D-Sub and DVI)3. DVR card models: 4416SG DVR cards (x2) or 4416DG DVR cards

(x2)

Microsoft Windows Settings1. Change the Desktop Display model to Horizontal Stretch2. Change the VGA Resolution (DPI) to 2048x768, 16 bitPS. It requires two DVR cards of the same model to build a 32 channel

DVR system. For example, stack two 4416SG DVR cards or two

4416DG DVR cards to set up a 32CH DVR system.

If you are using ATI VGA card, please refer to Appendix:ATI &

Nvidia Dual-screen setting.


2/14


- 2 - 1/9/2007

II. huperVision 4000 Installation

Step 1: Click [setup.exe] to install huperVision 4000 v.1.12.Click Next to continue the installation.

Step 2: Select I accept.


3/14


- 3 - 1/9/2007

Step 3:Click Next

Step 4: Select 32ch version and click Next


4/14


- 4 - 1/9/2007

Step 5: Click Install

Step 6: Click Finish after the InstallShield Wizard is Completed.


5/14


- 5 - 1/9/2007

Step 7: Reboot the computer, and the Site Serverwill start

automatically.

Step 8:After the 32CH DVR system is launched, huperVision 4000 will require

to add the video record storage. To avoid the disorder of video record database,

it is important to specify two separate record storage for CH1~16 and CH17~32

before using huperVision 4000. You may see the folder F:\data1 in the left

monitor is assigned to CH1~16 while the folder G:\data2 in the right monitor is

assigned to CH17~32.


6/14


- 6 - 1/9/2007

III. Remote Connection to the 32CH DVR System

1.Which Ports to manually open in internet connectionfilewall and router?

For 1 ~ 16 CH :

Web Server : TCP 80 Vedio Access: TCP 18082(Speed > 56K) TCP

18083(Speed 56K) TCP18085(Speed


7/14


8/14


- 8 - 1/9/2007

4.How to download video records by using the huperRemoteprogram?

To download video records from the database, you need to

connect to the following Site Addresses:

For 1~16CH: xxx.xxx.xxx.xxx (Example: 202.22.140.15)

For 17~32CH: xxx.xxx.xxx.xxx:81 (Example:

202.22.140.15: 81)

Note: It requires separate download from the above two Site

Addresses. For example, you have to connect to202.22.140.15 to download the video records of the first 16

channels. If youd like to download the records of CH 17~CH

32, you have to connect to 202.22.140.15: 81 for a separate

download.

1~16CH

17~32CH


9/14


- 9 - 1/9/2007

Appendix: ATI & Nvidia Dual-Screen Setting

I. ATI Dual-screen settingII. Nvidia GeForce 6600 Dual-screen setting

I. ATI Dual-screen setting

Download Drivers & Software http://www.ati.com(1) Microsoft .NET Framework

(2) Catalyst Control Center Package

1. Install Microsoft .NET Framework

2. Install VGA driver

3. Setup ATI-multimoniter

(1) Right click you mouse on the Windows desktop

(2) Select ATI Catalyst Control


10/14


- 10 - 1/9/2007

4. Click Next button

5. Click Go button


11/14


- 11 - 1/9/2007

6. Select and click Next button

7. Select Horizontal Stretch and click Next button


12/14


- 12 - 1/9/2007

8. Click Finish

9. Check Display Properties 2048*768,16bit.


13/14


- 13 - 1/9/2007

II. Nvidia GeForce 6600 Dual-screen setting

Step 1: Select Desktop Management page and Click Disable

Step 2: Select nView Display Settings and nView Display Mode is

Horizontal Span.


14/14


- 14 - 1/9/2007

Step 3: Check Display Properties 2048*768,16bit.

Step 4: The Display was like this.

hup er vision 32 chin stall

Documents