7/31/2019 Hobas Cc-grp Pressure Pipes

1/10

Dimensions and masses may vary from the tabled values, depending on manufactoring tolerances local standards and practices, however productperformance always complies with the relevant standards. HOBAS reserves the right to change the technical specifications, without prior notice.

Total pages: 6

HOBAS CC-GRP Pressure Pipes

250 B2 272 6,7 8,8 10000 20

250 B2 272 7,9 10,4 10000 25

150 B2 167 4,1 3,6 10000 6

150 B2 167 3,3 2,7 5000 10

150 B2 167 3,8 3,4 5000 6

150 B2 167 3,8 3,4 5000 4

150 B2 167 4,1 3,6 10000 4

150 B2 167 5,5 4,4 10000 25

150 B2 167 6,5 5,2 10000 32

150 B2 167 4,8 3,8 10000 20

150 B2 167 3,9 3,2 10000 10

150 B2 167 4,2 3,4 10000 16

200 B2 220 8,1 8,5 10000 32

200 B2 220 4,2 4,9 5000 6

200 B2 220 5,2 6,5 10000 6

200 B2 220 5,2 6,5 10000 4

250 B2 272 9,1 11,9 10000 32

200 B2 220 4,2 4,9 5000 4

200 B2 220 5,7 6,1 10000 20

200 B2 220 6,7 7,1 10000 25

200 B2 220 5,0 5,3 10000 16

200 B2 220 4,0 4,3 5000 10

200 B2 220 5,0 5,6 10000 10

DN Series OD (min) e (min) M (min) SN PN

HOBAS CC-GRP Pipes can be supplied in various stiffness classes. The following tables only contain data for the mostcommon SN-classes, detailled information about higher SN-classes may be supplied by HOBAS on request. The standard(nominal) effective length of all HOBAS CC-GRP Pipe is approx. 3, 4, 5 or 6 meters. However, pipes may be supplied inother lengths on request. HOBAS CC-GRP Standard Pipe lengths are supplied with a coupling already mounted on one end.Couplings may be higher pressure rated than the pipes they have been supplied with.

OD..........Outside Diameter [mm]

e.............Wall Thickness of Pipe [mm]

DN..........Nominal Diameter [mm]

M............Pipe Mass [kg/m]

L.............Length [mm]

SN..........Nominal Stiffness [N/m2]

PN..........Nominal Pressure [bar]

7/31/2019 Hobas Cc-grp Pressure Pipes

2/10

Dimensions and masses may vary from the tabled values, depending on manufactoring tolerances local standards and practices, however productperformance always complies with the relevant standards. HOBAS reserves the right to change the technical specifications, without prior notice.

Total pages: 6

300 B3 315 5,9 10,6 5000 4

300 B2 B4 324 6,0 11,3 5000 4

350 B2 376 11,8 21,4 10000 32

350 B2 376 8,6 15,7 10000 20

350 B2 376 9,5 17,4 10000 25

300 B3 315 5,9 10,6 5000 6

300 B3 315 7,3 13,7 10000 6

300 B2 B4 324 6,1 11,2 5000 6

300 B3 315 7,3 13,7 10000 4

300 B2 B4 324 7,5 14,4 10000 4

350 B2 376 8,1 15,2 10000 16

400 B3 400 12,2 23,5 10000 32

350 B2 376 6,9 15,2 5000 4

350 B2 376 6,6 12,7 5000 10

350 B2 376 8,3 16,4 10000 10

350 B2 376 8,6 19,4 10000 6

350 B2 376 8,6 19,5 10000 4

350 B2 376 7,0 15,1 5000 6

250 B2 272 5,1 7,8 5000 4

250 B2 272 6,3 10,0 10000 4

300 B2 B4 324 10,3 16,1 10000 32

300 B3 315 8,7 13,2 10000 25

300 B3 315 10,1 15,3 10000 32

250 B2 272 6,1 8,6 10000 10

250 B2 272 6,0 8,0 10000 16

250 B2 272 4,9 6,7 5000 10

250 B2 272 5,1 7,8 5000 6

250 B2 272 6,3 10,0 10000 6

300 B3 315 7,0 11,5 10000 10

300 B2 B4 324 7,2 12,2 10000 10

300 B3 315 5,6 9,0 5000 10

300 B2 B4 324 7,5 14,2 10000 6

300 B2 B4 324 5,8 9,4 5000 10

300 B3 315 7,3 11,2 10000 20

300 B2 B4 324 8,9 13,9 10000 25

300 B2 B4 324 7,5 11,8 10000 20

300 B2 B4 324 7,1 11,4 10000 16

300 B3 315 6,9 10,8 10000 16

DN Series OD (min) e (min) M (min) SN PN

7/31/2019 Hobas Cc-grp Pressure Pipes

3/10

Dimensions and masses may vary from the tabled values, depending on manufactoring tolerances local standards and practices, however productperformance always complies with the relevant standards. HOBAS reserves the right to change the technical specifications, without prior notice.

Total pages: 6

450 B2 478 8,6 24,2 5000 6

450 B2 478 10,1 29,3 10000 6

450 B2 478 10,2 30,0 10000 4

500 B3 500 14,6 35,2 10000 32

450 B2 478 8,6 24,6 5000 4

450 B2 478 10,2 24,0 10000 20

450 B2 478 11,7 27,1 10000 25

450 B2 478 9,6 23,2 10000 16

450 B2 478 8,2 20,4 5000 10

450 B2 478 9,9 25,3 10000 10

500 B2 530 15,3 39,3 10000 32

500 B3 500 10,4 28,0 10000 10

500 B3 500 10,3 26,2 10000 16

500 B3 500 11,8 28,8 10000 25

500 B2 530 12,4 31,9 10000 25

500 B3 500 10,5 26,0 10000 20

500 B2 530 10,6 28,6 10000 16

500 B2 530 11,2 29,4 10000 20

400 B2 427 8,6 18,6 10000 16

400 B3 400 8,6 17,3 10000 16

400 B2 427 8,9 20,2 10000 10

400 B3 400 7,0 14,4 5000 10

400 B3 400 8,8 18,7 10000 10

400 B3 400 9,8 19,1 10000 25

400 B2 427 12,9 26,6 10000 32

400 B2 427 10,4 21,6 10000 25

400 B2 427 9,0 18,8 10000 20

400 B3 400 8,9 17,4 10000 20

400 B2 427 9,1 23,6 10000 4

400 B3 400 9,0 22,0 10000 4

400 B2 427 7,7 19,5 5000 4

450 B2 478 14,3 33,0 10000 32

400 B3 400 7,3 17,3 5000 4

400 B3 400 9,0 21,7 10000 6

400 B2 427 7,4 16,3 5000 10

400 B2 427 9,1 23,1 10000 6

400 B2 427 7,7 19,3 5000 6

400 B3 400 7,3 16,9 5000 6

DN Series OD (min) e (min) M (min) SN PN

7/31/2019 Hobas Cc-grp Pressure Pipes

4/10

Dimensions and masses may vary from the tabled values, depending on manufactoring tolerances local standards and practices, however productperformance always complies with the relevant standards. HOBAS reserves the right to change the technical specifications, without prior notice.

Total pages: 6

600 B1 616 10,1 32,7 5000 10

600 B1 616 13,1 43,6 10000 10

600 B1 616 13,2 49,7 10000 6

600 B1 616 13,2 50,9 10000 4

600 B1 616 10,5 38,7 5000 6

600 B1 616 17,4 51,8 10000 32

550 550 9,2 30,8 5000 4

600 B1 616 14,3 42,9 10000 25

600 B1 616 12,9 40,9 10000 16

600 B1 616 13,2 40,4 10000 20

600 B1 616 10,6 39,8 5000 4

650 650 11,2 43,5 5000 6

650 650 13,9 55,4 10000 6

650 650 13,9 45,0 10000 20

650 650 15,0 47,3 10000 25

650 650 13,2 43,7 10000 16

650 650 10,7 36,5 5000 10

650 650 13,8 48,5 10000 10

500 B2 530 8,9 27,9 5000 6

500 B3 500 8,9 26,6 5000 6

500 B2 530 11,2 36,7 10000 4

500 B3 500 8,9 26,9 5000 4

500 B3 500 10,6 32,8 10000 4

500 B3 500 8,6 22,4 5000 10

500 B2 530 11,0 31,5 10000 10

500 B2 530 8,6 23,7 5000 10

500 B3 500 10,6 32,2 10000 6

500 B2 530 11,2 35,9 10000 6

550 550 9,1 26,0 5000 10

550 550 11,7 34,3 10000 10

550 550 11,6 38,8 10000 6

550 550 11,6 39,6 10000 4

550 550 9,2 30,1 5000 6

550 550 16,1 42,6 10000 32

500 B2 530 8,9 28,4 5000 4

550 550 13,0 34,6 10000 25

550 550 11,2 31,2 10000 16

550 550 11,8 32,1 10000 20

DN Series OD (min) e (min) M (min) SN PN

7/31/2019 Hobas Cc-grp Pressure Pipes

5/10

Dimensions and masses may vary from the tabled values, depending on manufactoring tolerances local standards and practices, however productperformance always complies with the relevant standards. HOBAS reserves the right to change the technical specifications, without prior notice.

Total pages: 6

800 B1 820 14,0 70,0 5000 6

800 B1 820 17,4 89,1 10000 6

800 B1 820 17,5 91,8 10000 4

860 860 18,8 78,9 10000 25

800 B1 820 14,0 71,7 5000 4

800 B1 820 17,6 72,6 10000 20

800 B1 820 17,9 71,7 10000 25

800 B1 820 16,6 70,4 10000 16

800 B1 820 13,5 59,0 5000 10

800 B1 820 17,5 78,3 10000 10

860 860 18,0 78,0 10000 20

860 860 14,6 79,1 5000 4

860 860 18,4 101,2 10000 4

860 860 18,3 86,1 10000 10

860 860 17,5 77,7 10000 16

860 860 14,2 65,0 5000 10

860 860 14,7 77,2 5000 6

860 860 18,3 98,3 10000 6

700 B1 718 11,8 44,8 5000 10

700 B1 718 15,3 59,5 10000 10

700 B1 718 15,3 68,2 10000 6

700 B1 718 15,4 70,0 10000 4

700 B1 718 12,3 53,3 5000 6

650 650 11,2 44,3 5000 4

650 650 14,0 56,8 10000 4

700 B1 718 16,5 57,8 10000 25

700 B1 718 14,6 53,7 10000 16

700 B1 718 15,5 55,6 10000 20

750 750 16,0 74,5 10000 6

750 750 12,3 48,8 5000 10

750 750 12,9 58,5 5000 6

750 750 12,9 60,0 5000 4

750 750 16,1 76,8 10000 4

750 750 17,2 62,6 10000 25

700 B1 718 12,3 54,6 5000 4

750 750 16,2 60,8 10000 20

750 750 15,9 64,9 10000 10

750 750 15,2 58,6 10000 16

DN Series OD (min) e (min) M (min) SN PN

7/31/2019 Hobas Cc-grp Pressure Pipes

6/10

Dimensions and masses may vary from the tabled values, depending on manufactoring tolerances local standards and practices, however productperformance always complies with the relevant standards. HOBAS reserves the right to change the technical specifications, without prior notice.

Total pages: 6

960 960 19,0 95,0 10000 16

960 960 19,9 105,1 10000 10

960 960 20,9 98,2 10000 25

960 960 20,2 98,4 10000 20

960 960 15,8 81,2 5000 10

960 960 19,9 123,2 10000 4

960 960 16,2 98,5 5000 4

960 960 19,8 119,6 10000 6

960 960 16,3 96,5 5000 6

900 B1 924 15,6 91,1 5000 4

900 B1 924 18,3 87,7 10000 16

900 B1 924 19,2 97,1 10000 10

900 B1 924 20,2 90,9 10000 25

900 B1 924 19,4 90,8 10000 20

900 B1 924 15,7 89,0 5000 6

900 B1 924 19,2 113,8 10000 4

900 B1 924 15,2 75,2 5000 10

900 B1 924 19,1 110,7 10000 6

DN Series OD (min) e (min) M (min) SN PN

* Table continues on next page

*

7/31/2019 Hobas Cc-grp Pressure Pipes

7/10

Dimensions and masses may vary from the tabled values, depending on manufactoring tolerances local standards and practices, however productperformance always complies with the relevant standards. HOBAS reserves the right to change the technical specifications, without prior notice.

Total pages: 4

HOBAS CC-GRP Pressure Pipes

1200 B1 1229 20,6 156,3 5000 6

1200 B1 1229 25,7 199,4 10000 6

1000 B1 1026 17,4 110,1 5000 6

1000 B1 1026 21,2 137,4 10000 6

1000 B1 1026 21,3 141,0 10000 4

1100 1100 23,3 129,8 10000 20

1000 B1 1026 17,3 112,7 5000 4

1000 B1 1026 21,5 111,9 10000 20

1000 B1 1026 22,0 110,5 10000 25

1000 B1 1026 20,3 108,7 10000 16

1000 B1 1026 17,0 93,6 5000 10

1000 B1 1026 21,4 121,0 10000 10

1100 1100 22,0 126,1 10000 16

1200 B1 1229 26,1 162,9 10000 20

1100 1100 18,3 127,4 5000 4

1200 B1 1229 24,7 158,6 10000 16

1200 B1 1229 20,1 132,9 5000 10

1200 B1 1229 25,9 175,9 10000 10

1100 1100 17,9 105,8 5000 10

1100 1100 23,2 140,1 10000 10

1100 1100 23,0 159,3 10000 6

1100 1100 23,1 163,6 10000 4

1100 1100 18,4 124,7 5000 6

DN Series OD (min) e (min) M (min) SN PN

HOBAS CC-GRP Pipes can be supplied in various stiffness classes. The following tables only contain data for the mostcommon SN-classes, detailled information about higher SN-classes may be supplied by HOBAS on request. The standard(nominal) effective length of all HOBAS CC-GRP Pipe is approx. 3, 4, 5 or 6 meters. However, pipes may be supplied inother lengths on request. HOBAS CC-GRP Standard Pipe lengths are supplied with a coupling already mounted on one end.Couplings may be higher pressure rated than the pipes they have been supplied with.

OD..........Outside Diameter [mm]

e.............Wall Thickness of Pipe [mm]

DN..........Nominal Diameter [mm]

M............Pipe Mass [kg/m]

L.............Length [mm]

SN..........Nominal Stiffness [N/m2]

PN..........Nominal Pressure [bar]

7/31/2019 Hobas Cc-grp Pressure Pipes

8/10

Dimensions and masses may vary from the tabled values, depending on manufactoring tolerances local standards and practices, however productperformance always complies with the relevant standards. HOBAS reserves the right to change the technical specifications, without prior notice.

Total pages: 4

1500 1500 31,7 243,1 10000 20

1400 B1 1434 24,0 221,0 5000 4

1500 1500 31,5 249,2 10000 16

1500 1500 24,6 200,3 5000 10

1500 1500 31,8 264,2 10000 10

1400 B1 1434 23,5 182,7 5000 10

1400 B1 1434 30,3 241,0 10000 10

1400 B1 1434 30,0 273,0 10000 6

1400 B1 1434 30,3 282,9 10000 4

1400 B1 1434 23,9 213,8 5000 6

1500 1500 31,3 299,3 10000 6

1535 1535 25,3 213,8 5000 10

1535 1535 32,6 282,6 10000 10

1500 1500 31,4 307,3 10000 4

1500 1500 25,1 235,3 5000 6

1500 1500 25,1 242,6 5000 4

1535 1535 32,3 264,6 10000 16

1535 1535 32,5 257,1 10000 20

1280 1280 26,8 217,2 10000 6

1280 1280 20,9 144,4 5000 10

1280 1280 21,5 170,6 5000 6

1280 1280 21,5 175,8 5000 4

1280 1280 26,9 223,2 10000 4

1200 B1 1229 20,6 161,3 5000 4

1200 B1 1229 25,8 204,8 10000 4

1280 1280 27,2 177,0 10000 20

1280 1280 27,0 190,8 10000 10

1280 1280 25,7 172,1 10000 16

1350 1350 27,9 240,2 10000 4

1350 1350 22,3 183,7 5000 6

1350 1350 22,3 189,4 5000 4

1400 B1 1434 30,0 227,1 10000 16

1400 B1 1434 30,3 221,6 10000 20

1350 1350 27,2 192,0 10000 16

1350 1350 28,8 197,5 10000 20

1350 1350 28,5 212,6 10000 10

1350 1350 27,8 233,7 10000 6

1350 1350 22,1 160,8 5000 10

DN Series OD (min) e (min) M (min) SN PN

7/31/2019 Hobas Cc-grp Pressure Pipes

9/10

Dimensions and masses may vary from the tabled values, depending on manufactoring tolerances local standards and practices, however productperformance always complies with the relevant standards. HOBAS reserves the right to change the technical specifications, without prior notice.

Total pages: 4

2000 B1 2046 43,5 503,7 10000 10

1800 B1 1842 31,0 372,1 5000 4

2000 B1 2046 33,8 382,4 5000 10

2000 B1 2046 34,4 444,5 5000 6

2000 B1 2046 43,1 568,6 10000 6

1800 B1 1842 30,4 309,3 5000 10

1800 B1 1842 39,1 407,8 10000 10

1800 B1 1842 38,6 457,6 10000 6

1800 B1 1842 39,0 474,7 10000 4

1800 B1 1842 30,9 359,8 5000 6

2000 B1 2046 43,3 585,6 10000 4

2160 2160 36,4 515,0 5000 4

2160 2160 45,4 650,0 10000 4

2160 2160 46,0 563,2 10000 10

2000 B1 2046 34,4 459,6 5000 4

2160 2160 35,8 427,9 5000 10

2160 2160 36,3 497,4 5000 6

2160 2160 45,3 632,3 10000 6

1600 B1 1638 34,8 321,4 10000 10

1600 B1 1638 34,4 301,2 10000 16

1600 B1 1638 27,1 243,6 5000 10

1600 B1 1638 27,6 283,8 5000 6

1600 B1 1638 34,4 361,3 10000 6

1535 1535 25,7 247,0 5000 6

1535 1535 32,1 314,3 10000 6

1535 1535 32,1 322,6 10000 4

1600 B1 1638 34,8 293,0 10000 20

1535 1535 25,7 254,4 5000 4

1720 1720 29,0 313,4 5000 6

1720 1720 36,1 398,7 10000 6

1720 1720 36,3 410,4 10000 4

1800 B1 1842 37,2 365,1 10000 16

1720 1720 29,0 324,1 5000 4

1600 B1 1638 27,7 293,2 5000 4

1600 B1 1638 34,5 371,2 10000 4

1720 1720 34,8 317,5 10000 16

1720 1720 28,4 268,9 5000 10

1720 1720 36,6 355,0 10000 10

DN Series OD (min) e (min) M (min) SN PN

7/31/2019 Hobas Cc-grp Pressure Pipes

10/10

Dimensions and masses may vary from the tabled values, depending on manufactoring tolerances local standards and practices, however productperformance always complies with the relevant standards. HOBAS reserves the right to change the technical specifications, without prior notice.

Total pages: 4

2400 2400 51,0 809,8 10000 4

2400 B1 2453 41,5 666,4 5000 4

2400 2400 40,6 637,2 5000 4

2400 2400 40,4 615,4 5000 6

2400 B1 2453 41,3 643,8 5000 6

2400 B1 2453 51,7 840,3 10000 4

2555 2555 43,0 700,4 5000 6

2555 2555 53,8 914,2 10000 4

2555 2555 43,2 725,1 5000 4

2555 2555 54,6 792,4 10000 10

2555 2555 42,6 604,4 5000 10

2555 2555 54,1 896,3 10000 6

2400 B1 2453 51,9 823,7 10000 6

2200 B1 2250 37,7 538,8 5000 6

2200 B1 2250 47,6 709,5 10000 4

2200 B1 2250 47,4 689,9 10000 6

2200 B1 2250 47,8 611,0 10000 10

2200 B1 2250 37,3 465,6 5000 10

2200 B1 2250 37,8 557,1 5000 4

2400 2400 40,0 531,8 5000 10

2400 2400 50,4 780,5 10000 6

2400 B1 2453 40,9 556,6 5000 10

2400 2400 51,3 698,1 10000 10

2400 B1 2453 52,4 729,4 10000 10

DN Series OD (min) e (min) M (min) SN PN