head to toe installation of odi 11.pdf
TRANSCRIPT
-
Head to Toe Installation of ODI 11.1.0.5g
Step 1 First and Foremost step is the location of JDK in your machine . Make sure jdk is properly
installed in your machine .
Note If there are 2- 3 different versions of JDK installed in your machine Make sure in class path you
should mention the one which you want to use .
Currently we are using jdk 1.6.0_13 in our ODI 11.1.0.5 installation.
Step 2 The following window will automatically appear in you have given the correct path of jdk (as
mentioned) in the above command window.
-
Note Wait for few mins( 2- 5 mins) if the following window doesnt appear means jdk has some
problem .You should install JDK properly.
Step 3 In the following window you will see ODI Studio (Local agent) checked by default. Make sure
you check ODI installation and Standalone installation as shown in the window. Click NEXT then.
-
Step 4 Below window will appear automatically .
Step 5 Given is the default path where ODI get installed. You can also change if needed.
-
Step 6 By default Configuration Repositories radio button is selected .Click Skip Repository
Configuration button . Click NEXT .
-
Step 7 -- Enter the value Of Agent Name and Agent Port as given in the window.
Step 8 If you feel like get intimated in case you are getting some errors you can mention your Email Id
in the blank ( Optional) .If dont want click NEXT
Step 9 By NOT entering the email id and on clicking Next , the following window will appear . Click YES.
-
Step 10 The following Summary window will appear. Click Install .
Step 11 Progress window will appear .
Note Sometimes the progress/ installation doesnt start though you have properly installed JDK ( 1st
step) and by following all the above steps .Installation doesnt start because of not enough space in the
-
directory where you are trying to install ODI . So make sure you have around 2.5 GB free space wherever
you are trying to install ODI .
Step 12 After successful installation following window will appear .Click NEXT .
-
Step 13 Click Finish .
Step 14 Start ODI . On the left pan pop will you will see Connect to Repository the Login pop will
appear .
-
Step 15 Click + BUTTON on the above window. The following window will appear.
Step 16 Fill the given details in the above window .
User SUPERVISOR
Password SUNOPSIS
User odi11113
Password -- odi11113
-
Step 17 Finally you will be able to see Successful Connection.