hc100 printer initial setup meditech client server€¦ · hc100 printer initial setup meditech...
TRANSCRIPT
1 of 13
HC100 Printer Initial Setup
Meditech Client Server
If using DHCP:
Plug into network, allow to download a IP Address.
(If not using DHCP, assign an IP address manually to the printer).
Print Test Label, Hold down Pause / Feed Button on Unit until it blinks orange once and
then release.
This test Label will include the downloaded IP Address. You can then browse to the
printer to set the admin data.
The DEFAULT ADMIN PASSWORD is 1234. This should be updated.
Go to print server settings
2 of 13
Go to Print Server
Select Web Admin to configure password
Configure Password.
Select TCP/IP Configuration
3 of 13
Enter address and set protocol to Permanent
Go back to general setup
Modify DNS Name Here.
4 of 13
#1 - Add Printer to the Meditech Print Server
Add Printer Wizard
Local Printer
Create a New Port
Standard TCP/IP Port
5 of 13
TCP/IP Printer Port Wizard
Enter IP Address
Standard
Generic Network Card
FINISH
6 of 13
Install Printer Software Wizard
Generic
Generic/Text Only
Add Printer Name
7 of 13
Do not share
FINISH
8 of 13
#2 – Add Printer to Meditech
Go to Universe > Dictionary Menu > Printer > Enter/Edit
Mnemonic: Enter Name of Printer you just assigned on Print Server
Network Name: Enter Name of Printer you just assigned on Print Server
(Naming Convention for Printer and Network Name may differ by facility)
Non Windows Socket Connection: N
Printer Model: FARGO (or other appropriate Bar Code Format)
FILE
9 of 13
Go to Universe > Dictionary Menu > MEDITECH Printer Lists > Enter/Edit All
Printers List
Note new printer is in “All Printers List”.
File/Save
10 of 13
Using any print prompt, click REFRESH to refresh printer list.
11 of 13
#3 – Create or Upload Wristband Print Format
Options:
1. Create NPR to generate Wristband from Meditech <Or>
2. Download existing Standard Wristband Format from zip file (from Zebra).
To upload NPR from zip file –
Save zip file to your pc.
Go to Meditech > NPR > Updates > Load Reports from File
At the Load From File field, press the F9 key to locate zip files on your pc.
12 of 13
The Files of Type field should be set to “ALL FILES”.
Double click zip file location.
You should see
Exists - N
Load – Y
File/Save/F12 - NPR will be uploaded to Meditech.
13 of 13
Next, go to NPR > Reports > Process
Pull in report that you just uploaded.
Translate the report (#4)
Run the report to view to ensure that it works (#5)