WOVENWoven geotextiles are used in separation, stabilization and reinforcement applications over soft soils, which include paved and unpaved roads and embankments. Stabilization geotextiles provide a cost effective means of extending the life of the road or parking lot.

HIGH STRENGTHHigh strength geotextiles contain heavy woven tape/fibrillated fabric. It is resistant to ultraviolet degradation and to biological and chemical environments normally found in soils. High strength geotextiles are ideal for the construction of embankments over soft soils, steepened slopes, and modular block and/or wrapped-face retaining walls.

NONWOVENNonwoven geotextiles act as permeable separators that allow water to pass into the drainage system, while preventing soils and other material from clogging the system. Key characteristics of drainage geotextiles are the AOS (Apparent Opening Size), which indicates the size of openings in the material, and Flow Rate, which indicates how much water can pass through the geotextile.

- Woven and Nonwoven material

- Reinforcement of the sub-base to reduce the base thickness

- Stabilization of embankments over soft soils

- Multiple AOS values and Flow Rates

- Custom widths available

ADVANTAGES:

GEOSYNTHETICFABRIC

GEOSYNTHETICS

For more information about Geosynthetics, contact Inside Sales at 800.448.3636 email at info@acfenv.com

Geosynthetic fabrics help with sta-bilization, reinforcement and are cost-effective.

800.448.3636acfenvironmental.com

product product

SIMILAR PRODUCTS IN THIS FAMILY:

SPECIFICATIONS LET’S GET IT DONE

Woven Geotextiles - English Values

Call us or visit our website for a complete list of ACF products1.800.448.3636 acfenvironmental.com BMPStore.com

PROPERTY TEST METHOD UNITS VALUE S200E S200 S250 S300 HSP2 HSP4 M100 M200

MECHANICAL Typical Values for S200E only

Grab Tensile Strength ASTM D4632 lbs MARV 200 200 250 315 315 x 315 600 x 500 370 x 250 370 x 200Grab Elongation ASTM D4632 % MARV 15 15 15 15 15 15 x 15 15 15Wide Width Tensile Strength ASTM D4595 lbs/ft MARV 2400 x 2400 4800x4800Wide Width Elongation ASTM D4595 % MARV 12 x 8 10 x 8Wide Width Tensile Strength At 5% Strain

ASTM D4595 lbs/ft MARV 774x1404 1452 x 2604

Puncture Strength ASTM D4833 lbs MARV 90 90 100 150 140 180 120 90CBR Strength ASTM D6241 lbs MARV 700Mullen Burst ASTM D3786 psi MARV 400 400 450 600 800 1350 450 450Trapezoidal Tear ASTM D4533 lbs MARV 75 75 90 120 125x125 250 x 250 100 x 60 115 x 75

HYDRAULICApparent Opening Size (AOS)

ASTM D4751 US Sieve MARV 40 40 40 40 40 30 70 40

Permittivity ASTM D4491 sec -1 MARV 0.05 0.05 0.05 0.05 0.70 0.15 0.28 2.1Percent Open Area COE-02215 % MARV 4 10Water Flow Rate ASTM D4491 gpm/ft2 MARV 5.0 5.0 4.0 4.0 50 10 18 145

ENDURANCEUV Resistance ASTM D4355 % Retained

@ 500 hrsMARV 70 70 70 70 80 80 90 90

STANDARD PACKAGINGRoll Width ft MARV 12.5 12.5 / 17.5 15.0 / 17.5 12.5 / 17.5 15.0 15.0 6.0 / 12.0 6.0 / 12.0Roll Length ft MARV 432 432 / 309 300 / 309 360 / 258 300 300 300 / 300 300 / 300Roll Area yd2 MARV 600 600 / 600 600 / 600 500 / 500 500 500 200 / 400 200 / 400

Like Us On Facebook

ACF Environmental2831 Cardwell Road Richmond, Virginia 23234

(800) 448-3636 FAX (804) 743-7779www.acfenvironmental.com

Slit Film Yarns Monofilament Polypropylene YarnsMonofilament / Fibrillated YarnsWOVEN GEOTEXTILES

product

NONWOVEN GEOTEXTILESNonwoven Geotextiles - English Values

ACF Environmental2831 Cardwell Road Richmond, Virginia 23234

(800) 448-3636 FAX (804) 743-7779www.acfenvironmental.com

Call us or visit our website for a complete list of ACF products1.800.448.3636 acfenvironmental.com BMPStore.com

PROPERTY TEST METHOD UNITS VALUE N031 N035 N040 N045 N060 N070 N080 N100 N120

MECHANICALGrab Tensile Strength ASTM D4632 lbs MARV 80 90 100 120 160 180 205 250 300Grab Elongation ASTM D4632 % MARV 50 50 50 50 50 50 50 50 50Puncture Strength ASTM D6241 lbs MARV 175 250 270 310 410 455 525 650 790Mullen BurstTrapezoidal Tear ASTM D4633 lbs MARV 25 40 50 50 60 75 80 100 115

HYDRAULICApparent Opening Size (AOS)

ASTM D4751 US Sieve MARV 50 50 70 70 70 70 80 80 100

Permittivity ASTM D4491 sec -1 MARV 2.2 2.2 2.0 1.8 1.6 1.5 1.4 1.2 1.0PermeabilityWater Flow Rate ASTM D4491 gpm/ft2 MARV 150 150 140 120 110 100 90 80 75

ENDURANCEUV Resistance ASTM D4355 % Retained

@ 500 hrsMARV 70 70 70 70 70 70 70 70 70

STANDARD PACKAGINGRoll Width MEASURED ft MARV 12.5 / 15.0 12.5 / 15.0 12.5 / 15.0 12.5 / 15.0 12.5 / 15.0 12.5 / 15.0 12.5 / 15.0 12.5 / 15.0 12.5 / 15.0Roll Length MEASURED ft MARV 360 / 360 360 / 360 360 / 360 360 / 360 300 / 300 360 / 300 300 / 300 300 / 300 300 / 300Roll Area MEASURED yd2 MARV 500 / 600 500 / 600 500 / 600 500 / 600 417 / 500 500 / 500 417 / 500 417 / 500 417 / 500

Like Us On Facebook