effluent treatment plant
TRANSCRIPT
ZERO DISCHARGE SYSTEM (EFFLUENT TREATMENT PLANT)Enormous quantity of industrial effluents from various industries is causing our environment pollution. Handling of these effluents in most to make our environment safe and healthy is the biggest problem to tackle.
To keep our environment safe, SSP has innovated the Zero Pollution Effluent Treatment System (ETP) for treatment of industrial effluent with economical operation and quality discharge to meet the stringent pollution control norms.
Depending upon the type of effluent various processes are developed for the cost effective treatment. The technological solutions are available after complete research and trial run at our pilot plants.
Loading...
Products & Services
Sewage Treatment Plants & Equipments
Zero Discharge ETP RO Plants
Multiple Effect Evaporators
EIA, EMP & Risk Analysis
Effluent Treatment Plants
Effluent Treatment Plants Sand & Pebbles Activated Carbon & Anthracite Filter Press Bio Methanation Digestion Anaerobic Digestion Industrial Chlorinator Agitators & Mixers
Effluent Treatment Plants
Share:
We deal in Effluent Treatment Plants. Consolidating our position in the markets, we offer superior grade industrial effluent treatment plants, which have been proved immensely beneficial for controlling the pollution caused by industries. Developed in tune with international quality standard, these plants are sure to last for a long period of time. We offer these industrial effluent treatment plants at industry leading prices.
Effluent Treatment Plants
We offer high performance industrial effluent treatment plants, which are manufactured by us using finest quality of materials to ensure their flawless quality. Incorporated with advanced features, these plants are widely used in diverse industries for the treatment of Effluent.
Home Profile Products & Services
Media Gallery
Contact Us
Enquiry
Air Pollution Control Equipments
Solid Waste Management Systems
Water Treatment Plant & Equipments
Desalination Plants
Wet Scrubber
Showroom
View all our products / services as a slide show.
Hot Offers New Launches
Sewage Treatment Plants
Features:
Used in anaerobic and aerobic treatment plants.
Effective in biological sewerage treatment plants.
Can be easily diffused in aeration system.
These are belonged to Bio trickling filter class.
Useful for the treatment of chemical oxidation of high COD effluent.
Useful for removing of color for textile effluents.
Wet air oxidation plants for sulfide waste.
Used in carbon filters and pressure filters.
Used in tertiary treatment plants.
For emulsified and oily waste,
STP For Hospitals, Apartments, Hostels
STP Machineries & Pre-Fabricated STP Units
Zero Discharge RO & Nano Filtration Plants
Aeration Tank For Biological Treatment
Hot Offers New Launches
these are used with dissolved air flotation process.
Useful in reverse osmosis plants.
Useful in nanofiltration plants, ultra filtration plants.
Types:
Aerobic & Anaerobic effluent treatment plants
Biological Sewerage treatment plants
Diffused aeration system
Bio trickling filters
Chemical Oxidation of high COD effluent
Colour removal for textile effluents
Wet air oxidation plants for sulfide waste
Send Enquiry
Blowers in STP
Clarifiers & Clarifloculators
STP Low Profile For Residential Complex
Sewage Water Treatment Plant
Forced Circulation Evaporators
Sand & Pebbles
ESS supplying sand and pebbles in different pore size and mesh size as per customer requirement.Other Information
Pay Mode Terms: Other
Port of Dispatch: chennai/tuticorin
Packaging Details: poly pack
Send Enquiry
Activated Carbon & Anthracite
We offer Activated Carbon & Anthracite For WTP ETP STP. ESS supplying activated carbon (coconut shell based) and Anthrasite carbon which is used in Filter vessels for Water treatment plants, Effluent treatment plants and Sewage treatment plantsOther Information
Pay Mode Terms: L/C (Letter of Credit)
Port of Dispatch:
Chennai/Tuticorin
Packaging Details: polypack
Send Enquiry
Filter Press
We supply a wide range of filter press available in vrious capacities, different plate size and different pore size of the filter cloths, which are designed to custom specifications enable to give maximum filtration efficiency, longer life and least maintenance .
Send Enquiry
Bio Methanation DigestionWe provide bio methanation digestion systems, which are used for the purpose of decomposing and separating Organic matter from effluent by micro-organisms in absence of Oxygen. These digestion are efficient for effluent of bod 7000 PPM. They can also be availed in customized specifications of our clients.
Features:
Low sludge recirculation
Easy operation
No need of gas collection or gas holding
PLC/Embedded controlled
Send Enquiry
Anaerobic DigestionWe design and offer high standard anaerobic digestion systems, which are used to decompose & separate organic matter from effluent by micro-organisms in absence of oxygen. These anaerobic digestion systems convert the organic matter to Methane.
Features:
MoC: Civil/PP tank/steel fabrication
Gas holding: pressure vessel/ flexible sheets over top level
PLC/SCADA/ WEB ENABLE controlled
operation
Desulphurization /demoisturing/ gas engine for energy recovery
Send Enquiry
Industrial Chlorinator
We supply gas chlorinators for sewage treatment, effluent treatment, cooling tower water treatment and raw water disinfection.
Send Enquiry
Agitators & MixersEnviro Solutions & Services manufacture, fabricate, supply erection, testing and commissioning of agitators, mixer, fermentor agitator in different sizes and capacity of preparation tanks.We manufacture high speed agitator, stirrer, agitator for reaction vessels as per the customer requirements.
The agitator consist of the following:
Shaft (MOC: SS or MS,Epoxy coated) in diiferent dia and length
Impellor (MOC: SS or MS,Epoxy coated)
type: cureved vanes, baffle type, propellor type, radial turbine type
Motor Gear box
( belt drive , direct coupled)
Seal and bearing
Application:
Storage vessels
Lime preparation tank
Chemical preparation tank for mixing and homogenization
Anaerobic digestor
Send Enquiry
Loading...
Contact us
Mr. G. Thirugnanam10/2, Fifth Cross Extension, Bharathi NagarCoimbatore, Tamil Nadu - 641 006, India Telephone: +(91)-(422)-6556501
Contact via E-mail
Loading...
Contact via Mobile
Contact via SMS
Home | Profile | Products & Services | Media Gallery | Site Map | Contact Us | Enquiry
© Enviro Solutions & Services. All Rights Reserved (Terms of Use)Developed and Managed by IndiaMART InterMESH Limited
Effluent Treatment Plant Varun Eco Treatment Equipments Pvt. Ltd. offers wide range of waste water treatment plants applicable to textile mil l s , slaughter houses,
diaries, paper mills, oil refineries, cold rolling mills, glass factories, chemical and processing industries etc. The com pany's i ndustrial effluent treatment plants (ETP), sewage treatmen t plants (STP) plants for defective portable water sources are assets in the MF and other industries. These plants are consisting of physio- chemical treatment plant, biological treatment followed by tertiary treatment. These effluent treatment plants meet the norms of State Pollution Control Boards and waste water can be recycled to re-use for gardening, cooling etc. It undertakes tailor made batch, semi automatic and automatic plants depending on the nature, concentration of pollutants, waste volume generated and space available in the industry. The company also undertake operation and maintenance annual contract for ETP/ STPs etc.
Effluent Treatment Plant Schematic Diagram
Effluent Treatment Plant Effluent Treatment Plant
» Contact us for a quotation for S.t.p/E.t.p/Compact plants
Water Treatment PlantThe high rate of population growth and urbanization are two major factors which compel the optimum use of scarce fresh water resources. This has compelled us to provide solutions for residential, commercial, and industrial water treatment plant and conditioning systems. Our industrial water treatment plants are made of stainless steel that uses high quality and safe equipment with automatic control and low treatment cost. Our water treatment plants are customized to processes such as ultraviolet treatment, bromination, iodination, and radial flow iron reduction. This in turn increases our ability to meet specialized needs.
Our water treatment plant has the following advantages:» No surplus sludge» Intensive biological treatment » Submerged fixed film process
» Increase capacity» Treat wastewater treatment of different concentrations
River Water Treatment Plant
Manual Filters
Chemical Dosing System Activated Carbon Filter
Reverse Osmosis PlantReverse Osmosis is used to purify water and remove salts and other impurities in order to improve the color, taste or properties of the fluid. It can be used to purify other fluids such as ethanol, glycol etc. At Varun Eco Treatment Equipments Pvt. Ltd., our Reverse
Osmosis Plant incorporate all of the components and instrumentation required for operation, as well as the versatility to adapt to specific customer requirements. We use of high quality reverse osmosis membrane elements that ensures flawless operation. Our Reverse Osmosis Plant have the following advantages:
Advantages of our ETPs» Actively rejects ions and contaminants» roduce water that meets the most demanding specifications» Allow the membrane to continually clean itself » Higher pressure from the pump to push the fluid through the membrane» Capable of rejecting bacteria, salts, sugars, proteins, particles, dyes, and other constituents» Works in various molecular weights
R.O. Unit for Housing Complex
Reverse Osmosis System
Reverse Osmosis Plant
R.O. Unit for Textile Industry
Aerators for Effluent Treatment Plants Effluent treatment plant, sewage treatment plants, wastewater treatment plant and pollution control equipments - aerators, fixed type and floating type aerators, clarifiers, flocculators, clariflocculators, api type oil separators and many more.
Company Profile Products »
o Installations R & D Clients Enquiry Contact Us
Energy Efficient Surface Aerators
Environ Make Energy Efficient Aerators
100 HP Energy Efficient Aerators Installation at M/s. Aurobindo Pharma Ltd. - Vizag Plant
ENVIRON make ‘Energy Efficient Aerator’ is highly efficient mechanical surface aerator especially designed for the use in the following systems.
ACTIVATED SLUDGE
CONTACT STABILIZATION
AEROBIC DIGESTION
SURFACE WATER
REGENERATION
EVAPORATION PONDS
PRE-AERATION
FISHERIES
AERATED LAGOONS
POLLUTED RIVERS
LAKES & PONDS
Years of intensive Research & Development have accomplished the development of the ‘Energy Efficient Aerator’. The result is a sturdy unit which combines high oxygenation efficiency (Oxygen Transfer Capacity ranging from 1.6 To 2.8 Kg per HP/Hour depending upon the size & atmospheric condition) with thorough mixing and propulsion of the influence to disperse the oxygen throughout the whole mass of the effluent zone
and vigorous agitation to achieve the minimum ripple velocity to keep the solids in suspension. The entire design is amazingly so simple that it is very easy to install, to run AND to maintain. It can be mounted on R.C.C. platform or on fabricated steel platform or on pontoons.
New Generation of Energy Efficient Aerators with Specially designed Impellers. Offered for SIDE WATER DEPTH upto 6.0 mtrs. Aeration Tanks.
Special Features Fabricated & Machined Base frame for 5HP to 15HP rating & for 20HP & above
Heavy ISMB Beam Base is used. So vibrations are lessened & again the base is machined on the top surface, so the life of the Gearbox is increased.
Cantilevered load reaction is passed through additional bearings and housing to beam base bottom to RCC platform. So gearbox is not at all affected by overhung load. So life of the gearbox is increased.
Additional Bearing Support is provided to the Aerator Shaft, so the unbalanced cantilevered loads are NOT passed to the output shaft of the Gearbox, but those loads are taken by TWO EXTRA bearings & housing. So life of the Gear box is increased.
Floor / base support area is 100 times more, so possibility of vibrations is reduced accordingly.
Due to conical Impeller and Solid MS shaft, CG lies nearer to center, so less impact loading.
Impeller is machined at centre for its concentric running. Since shaft is fully machined, NO possibility of VOUBLING of shaft concentric
running of impeller is ensured.
Since Horizontal foot mounted motor is used, the conditions are not seviour as those of flange mounted motor.
MAINTENANCE of the gearbox is minimal & handling is easier, as the Extra Bearings are provided to the Impeller Shaft.
Spares of the worm gearbox are easily available at comparatively lower cost. Wetted Parts are FRP Lined. Oxygen Transfer Test as per International American Standard & Wrinklers
Procedure of all the Proto type Aerators upto 100 HP are taken in our Inhouse Oxygen Transfer Testing Facility before placing in the market.
Specially designed Impeller is offered for HIGHER WATER DEPTH upto 6.0 mtrs. Aeration Tanks. (Less area for Aeration Tank is required, so saving in space)
Main Design & Constructional Aspects
Electric Motor
Electric motor is standard horizontal foot mounted, Square cage induction type three phase, totally enclosed fan cooled with IP 55, enclosure suitable for outdoor installation, being standard motor, easy availability and minimum ‘DOWN TIME’ are the direct advantages. Flange mounted motor is used for Helical gear type Aerator.
Gear Reducer
The worm gears (or helical gears only if asked for) are used having suitable service factor. The reducer bearing and gears are ‘OIL BATH LUBRICATED’ housed in cast iron casing. Since Greaves (Radicon) / Elecon make gears are used, trouble free and long working life of the gears are ensured.
First in India to offer machined beam base
Base
Fabricated and Machined base frame for below 20 HP Aerators and fabricated ISMB BEAM base machined on top for 20 HP and above ratings upto 50 HP ratings of the aerators. We are the only manufacturer in India to provide this feature.RATORS.
Shaft
Amply designed MS FULLY MACHINED solid shaft to take care of heavy, cantilevered, unbalanced and torsional loads. Supported on two numbers heavy duty antifriction bearings housed in heavy duty cast iron bearing housing. Tubular shaft in Aerators with helical gears.
Impellers at centre & shafts are fully machined
Impeller
Impeller is fabricated from mild steel plates having minimum thickness of 6 mm and designed as single shrouded pump impeller to achieve maximum oxygen transfer and mixing efficiency. Being a semi open type impeller it has got a very valuable features of SELF CLEANING. No rag, threads, other solids can get caught on blades. Hence, practically zero maintenance is required for the impeller. We are the only manufacturers who are machining the fabricated impeller to achieve the concentricity. Impeller in S. S. & RUBBER LINED construction is also offered by us. ALL WETTED PARTS ARE EPOXY PAINTED (FRP LINED AS OPTION).
Coupling
‘LOVE JOY’ type flexible coupling is used between motor and Gearbox. Heavy duty rigid type coupling is used on output shaft of the gearbox.
New Generation of Energy Efficient Aerators with Specially Designed Impellers
For compact ETP plant, we have specially designed aerators with special designed Impellers which are used for the aeration tank with lesser area and more depth creating good mixing activity at the bottom level too. This design is given for fixed type and floating type aerators which are in demand nowadays, due to space restrictions. New specially designed impeller to create excellent VORTEX, for higher Depths of Aeration Tank, no needs to provide any support in RCC Bottom slab of aeration Tank.
Floating Slow Speed Aerator
Installation of Floating Aerator at Site
They are sturdy, vibration less & having higher influence zone as compared to high speed floating Aerators. They can cater higher depths as compared to high speed Aerators. We have got more than 900 installations of this type.
Special Features
Not affected by Hydraulic level variation in aeration tank, High mixing rate and oxygen transfer efficiency. Easy to install, easy to operate and no R.C.C. platform required, hence economical installation. Flexibility of position change of aerators in case of expansion and insertion of new aerator for increase load without any change in aeration tank. These aerators are also offered with Special Designed Impellers for depths upto 6 mtrs. of aeration tanks and hence one can go for very compact aeration system.
Construction Features
Electric Motor, Gear Reducer, Base, Shaft, Impeller & Couplings are same for both the types of aerators. (Fixed & Floating Type Surface Aerators)
Floats
FRP lined as standard, or Stainless Steel SS 304, SS 316 construction can be provided if required, with necessary hooks for mooring, Nylon or Galvanized Steel rope with specially designed AIR VENT SYSTEM.
Inhouse Hydraulic Testing Facilities
Floating slow speed Aerator in our hydraulic testing facility
We are the only manufacturers who have got Hydraulic testing facilities for Aerators upto 150HP ratings. The ‘Energy Efficient Aerators’ are shop assembled and Hydraulically tested before despatch. The only ‘Energy Efficient Aerator’ in the market having one piece impeller machined to achieve concentricity after complete welding. The ‘Energy Efficient Aerator’ is supplied with wetted parts Epoxy painted (FRP lined as option). We
are the only manufacturers who can supply the aerators with wetted parts, i.e. Impeller and Shaft in ‘RUBBER LINED CONSTRUCTION’ also. This is possible because of our special constructional features of the aerators. Other coats can be given on requests for right applications of ‘Energy Efficient Aerator’. For further assistance, kindly contact our process engineers to assist in selection.
Oxygen Transfer Test Carriedout For
Under the pursuit of quality assurance, ENVIRON has conducted and given in-house Oxygen Transfer Tests as per American Standard and Wrinkler’s Procedure to :
1. M/S. AUROBINDO PHARMA LTD. – VIZAG for 100HP – on 20th Sept. 2002 & achieved 2.24 kg of O2/HP/HR.
2. M/S. RELIANCE – HAZIRA for 50HP on 9th September 2004 and achieved 1.6 kg of O2/HP/HR.
3. M/S CHEMINOR DRUGS LTD. – HYDERABAD for 30HP on 20th July 2000 and achieved 2.82 kg of O2/HP/HR.
4. M/S. KODINAR SUGAR FACTORY – KODINAR FOR THEIR ORDER OF 4 NOS. 30HP AERATORS.
5. M/S TAMILNADU PETRO PRODUCTS – CHENNAI for 25HP AERATOR on 16th Feb 1999 and achieved 2.20 kg of O2/HP/HR.
6. M/S. SOUTH INDIA VISCOSE (SIV INDS.) – COIMBATORE for THEIR ORDER OF 10 NOS. 20HP AERATOR on 18th Aug 1994 and achieved 1.72 kg of O2/HP/HR.
7. M/S. TAMILNADU PETRO PRODUCTS – CHENNAI for THEIR ORDER OF 20 NOS. 10HP AERATORS on 15th Nov 1997 and achieved 1.70 kg of O2/HP/HR Oxygen Transfer.
8. M/S. TAMILNADU PETRO PRODUCTS – CHENNAI for 10HP – Aerator – with 3% salinity Water used in Testing Tank – and achieved 1.03 kg of O2/HP/HR.
9. M/S. GUJARAT INSECTICIDES LTD. – ANKLESHWAR for Order of 5 Nos. 5HP Aerators on 2nd Aug 1999 – and achieved 1.82 kg of O2/HP/HR.
10. M/S PATTANCHERU ENVIRO TECH LTD. – PATTANCHERU CETP– for 30HP AERATOR on 27th December 2004 and achieved 1.91 kg of O2/HP/HR.
11. DEONAR SLAUGHTER HOUSE – DEONAR for 10HP – Aerator – on1st July, 2003.
12. DEONAR SLAUGHTER HOUSE – DEONAR for 30HP – Aerator – on 28th Aug. 2003
13. M/S DOMBIVILI BETTER ENVIRONMENT – DOMBIVILI (CETP),MIDC – for 40HP AERATOR on 7th Feb 2005 and achieved 1.98 kg of O2/HP/HR.
14. M/s. Vapi CETP, VAPI – For 40HP Aerator on 20.05.2009.15. M/S TORRENT PHARMACEUTICALS LTD.,INDRAD (AHMEDABAD) for
30HP AERATOR on 13th Dec 2006 and achieved 1.96 kg of O2/HP/HR.16. M/S HINDUSTAN NEWSPRINT LTD., KOTTAYAM DIST. – for 25HP
AERATOR on 9th Dec 2004 and achieved 2.40 kg of O2/HP/HR.
17. M/s. Arvind Accel Ltd.- Ahmedabad – for 15 HP AERATOR on 26 August 2011 and achieved 1.84 kg of O2/HP/HR.
Product Range
The product range available is 2 HP, 3 HP, 5 HP, 7.5 HP, 10 HP, 12.5 HP, 15 HP, 20 HP, 25 HP, 30 HP, 40 HP, 50 HP, 60 HP, 75 HP, 100 HP, 125 HP, 150 HP.
Advantages of Slow Speed Aerators Against High Speed Floating Aerator
ENVIRON does not recommend High Speed version of Aerators, since 1) Their influence zone is less compared to Slow speed ones 2) They cater SHALLOW DEPTHS as compared to Slow speed ones 3) They need Rigorous preventive maintenance because of a) Shaft and Bush pattern, remaining in effluent b) Possibility of clinging, adhering of bunch of threads, bunch of hair, plastic bags, cotton rags etc. between the blade tips & housing pipe. So from the process point of view and maintenance point of view, ENVIRON highly recommend SLOW SPEED FLOATING AERATORS.
INSTALLATIONS AT CETP / ETP WITH ENERGY CONSERVATION BY “ENVIRON” ENERGY EFFICIENT AERATORS
16 Nos. Floating Type ENVIRON Energy Efficient Aerators installed at Pattancheru CETP. (Stopped injecting liquid oxygen & saving in power also)
El02 Aerators replaced at Dombivali CETP with 8 nos. 40 HP ENVIRON Energy Efficient Aerators.
Replaced Diffused Aeration System & Fixed Aerators of other make at Vapi CETP with 20 nos. 40 HP ENVIRON Energy Efficient Aerators.
Replaced Diffused Aeration System with 9 nos. Floating Type 30 HP ENVIRON Energy Efficient Aerators at Mahad CETP.
Replaced 75HP Existing Aerators of other make with 8 nos. 40 HP ENVIRON Energy Efficient Aerators at M/s. Tamilnadu News Print & Papers Ltd. – Kaghatipuram, T.N.
Home | Company Profile | Products | Installations | R&D | Clients | Enquiry | Contact Us | Sitemap | Resources
© 2011 Environengg.com All Rights Reserved.
Effluent Treatment Plant - Improving Performance & Reducing Pollution
"Improving the Performance of Effluent Treatment Plant - A Good Practice Guide"
Effluent Treatment Plant - This informative good practice guide deals with improving the performance of effluent treatment plant to reduce operating costs and reduce environmental pollution. Most companies operate effluent treatment plants to reduce the
potential for pollution of receiving waters and to comply with discharge consent conditions. Effective management and control of the processes used for effluent treatment will help you to:
o Reduce your operating costs and thus increase profits.o Achieve more effective compliance with legislation.o Improve your company's public image.
This good practice guide aims to help companies reduce the costs associated with effluent treatment plant operation by at least 5%. As illustrated by the four Industry Examples at the back of the guide, some companies have achieved significantly greater cost savings by improving the performance of their effluent treatment plant (ETP). Although the guide is aimed particularly at the speciality chemicals industry, the advice given is applicable to many other companies operating an effluent treatment plant.
Before reviewing the operation of their ETP, companies are urged to take action to minimise the amount and strength of the effluent created by production processes. Producing less effluent in the first place will reduce the demands made on the ETP and thus save both money and effort.
ETP - Good Practice Guide
A thorough understanding of the nature and properties of your company's effluents is essential for cost-effective pollution control. The guide describes how to characterise your effluent streams and identifies key control parameters. It describes how to improve the performance of the most common treatment processes, including neutralisation, equalisation and activated sludge treatment. Advice on how to reduce sludge management costs is also given.
Improving the performance of the ETP will reduce your site's operating costs and make it easier for your site to comply with its discharge consent conditions.
Sites discharging to sewer will also reduce their trade effluent charges.
The five steps to effective effluent management are:
o characterise all effluents produced on-site;o implement a waste minimisation programme to reduce the volume and
strengths of effluents;o incorporate in-process conditioning and treatment, where appropriate;o determine and install segregation facilities to tailor treatment options;o optimise performance of ETP............... more >>
Crown copyright material is reproduced with the permission of the Controller of HMSO and the Queen.s Printer for Scotland.
Effluent Treatment PlantShare:
We offer Effluent Treatment Plant that is accurately formulated and environment friendly. Used in various factories, the treatment plant helps in solving the environment pollution problem without exposing the waste material to the environment. Easy to operate and low in maintenance, the range is extensively used in chemical, food and beverage, oil and petrochemical industries. Custom designed solutions are also provided as required by the client.
Effluent / Sewage Treatment PlantWe also design effluent treatment and sewage treatment plants and water pollution control related equipments. We are Designing and manufacturing fixed and floating aerators, clarifier, clariflocculations, Thickners, Agitators, Mixers, Stirrers, Flocculators, Oil Skimmers, Mechanised Bar Screen etc. for sewage treatment plant and wastewater treatment plant.
As the company strongly believes in R & D and Quality Assurance, it has gone for Aerators Testing Facility right the inception of the company's formation. Under quality assurance plan, each and every prototype Aerators are tested for Oxygen Transfer as per American Standard before placing in the market and each and every Aerator, which is manufactured, is shop assembled and run for Two hours in testing facility before dispatch. Being Environmentalist "ENVIRON" has specially developed and manufactured the Aerators even of 1 HP Rating andCentre Drive Clarifier Mechanism upto 2M Diameter and delivered within one week specially to small organizations.
The effluent treatment plants are designed to treat the effluent coming from different areas of the plant. The treatment of different effluents varies with the type of effluent. Water effluent treatment systems are designed to treat effluent mainly containing oily effluent. The water from the Transformer Area, Turbine building, Workshop etc., is collected in common collection sump from where water is pumped through the Plate Interceptor.
With the increase in the number industries, there is an increment of compounds of heavy metals and synthesized organic compounds into water causing its pollution. It is
adding some 10,000 new organic compounds each year. Our company holds great reputation in the market as a manufacturer, supplier, and exporter of flawless effluent treatment plants (ETP). We have over a decade of experience in making and exporting effluent water treatment plants. These ETPs are based on cutting-edge technology.
Further, with the technological changes in manufacturing process has resulted into more addition of compounds discharge. Conventional waste water treatment process is not efficient to treat the polluted water. With this thought in mind, Eco-Chem Laboratories P Ltd offers top-quality industrial effluent treatment plants which are highly appreciated by our clients for their effectiveness, easy handling, less maintenance, and affordable prices.
Operation:
Our effluent treatment plant and system is based on the aerobic respiration method; it consists of three stages namely primary treatment, secondary bio-treatment, and tertiary treatment. The effluent water is passed through various processes such as chemical dosing, aeration, and settling. The final treatment filtration cum absorption takes place by filters. Finally, the processed water goes for advance treatment and we get usable water which can be used further for irrigation and other purposes.
Send Enquiry
Effluent Treatment ChemicalsWe offer environment friendly and accurately formulated effluent treatment chemicals that are used widely in effluent treatment industry. Further, we also offer a variety of anionic/cationic polymers for industrial process and wastewater treatment. These are reckoned for the following features:
• The polymers vary in functionality • Completely harmless, nonflammable and non-explosive, our range of effluent treatment chemicals can be stored at room temperature. Further, these are good clarifying agents for wastewater of textile mining, pump & paper,
steel, metal and chemicals.
The Hyperion Wastewater Treatment plant is located in southwest Los Angeles, California, next to Dockweiler State Beach on Santa Monica Bay. The largest wastewater treatment facility in the Los Angeles Metropolitan Area, Hyperion is operated by the City of Los Angeles, Department of Public Works, Bureau of Sanitation.
Contents 1 History 2 External links 3 Notes
4 References
History
Until 1925, raw sewage from the city of Los Angeles was discharged untreated directly into Santa Monica Bay in the region of today’s Hyperion Treatment Plant.[1]
With the population increase, the amount of sewage became a major problem to the beaches, so in 1925 the city of Los Angeles built a simple screening plant in the 200 acres (0.81 km2) the city had acquired in 1892.[1]
Even with the screening plant, the quality of the water in the Santa Monica Bay was unacceptable, and in 1950 the city of Los Angeles opened the Hyperion Treatment Plant with full secondary treatment processes. In addition, the new plant included capture of biogas from anaerobic digesters to produce heat dried fertilizer.[1]
In order to keep up with the increase of influent wastewater produced by the ever growing city of Los Angeles, by 1957 the plant engineers had cut back treatment levels and increased the discharge of a blend of primary and secondary effluent through a five-mile (8 km) pipe into the ocean. They also opted to halt the production of fertilizers and started discharging digested sludge into the Santa Monica Bay through a seven-mile (11 km) pipe.[1]
Marine life in Santa Monica Bay suffered from the continuous discharge of 25 million pounds of wastewater solids (sludge) per month. Samples of the ocean floor where sludge had been discharged for 30 years demonstrated that the only living creatures were worms and a hardy species of clam. Additionally, coastal monitoring revealed that Bay waters often did not meet quality standards as the result of Hyperion’s effluent. These issues resulted in the City entering into a consent decree with the United States Environmental Protection Agency and the State of California to build major facility upgrades at Hyperion. In 1980, Los Angeles launched a massive sludge-out to full secondary program to capture all biosolids and keep them from entering the Bay. The sludge-out portion of the program was completed in 1987.
The $1.6 billion sludge-out to full secondary construction program replaced nearly every 1950-vintage wastewater processing system at Hyperion while the plant continuously treated 350 mgd and met all NPDES permit requirements.
Read more: http://www.answers.com/topic/hyperion-sewage-treatment-plant#ixzz1jpHRrR9v
How do effluent treatment plants and water treatment plants work?Improve In: Waste and Recycling, Scientific Method [Edit categories] Sewage Treatment Systems www.waspsystems.comCompact | Affordable | 5yr Warranty Available throughout Africa NOWStone Crushing Plant Orientalcrusher.com/CrushingPlantStone& Rock Crusher Plant Design. Quarry Crushing Plant From China!Ads
Answers.com > Wiki Answers > Categories > Science > Biology > Ecology and Bionomics > Environmental Issues > Waste and Recycling > How do effluent treatment plants and water treatment plants work?
Answer: Improve
A water treatment plant will usually take water from a dammed river. The water is then filtered and purified till it is potable (that is, drinkable). Depending on the quality of the water it may have to be disinfected with chlorine or other chemicals to make it safe for use.
An effluent treatment plant takes sewage runoff from toilets, factories, stormwater drains and other sources.
Screening: First the effluent is screened to remove any solids (cans, plastic, condoms, tampons etc). It then moves through a tank slowly enough so that sand, stones and rock sink to the bottom where they can be removed before the mixture starts going through pumps. (The sand is usually sent to landfill.)
Primary Treatment: The sewage then flows slowly through large tanks. Here the sludge sinks to the bottom and the oil and grease rise to the top. The sludge and the oils are then removed.
Secondary Treatment: The remaining mixture is treated using aerobic biological
processes. Air is pumped through to encourage bacteria and protozoas to break down the contaminants.
Tertiary Treatment: Finally the treated water is given a final processing before it is discharged into a river, lake or ocean. Any one or more of the following methods are used:
filtration (through sands) lagooning (stored in large man-made lagoons where reeds and other plants assist) constructed wetlands (rather like lagooning, using reedbeds and other similar
methods) nutrient removal (to remove nitrogen and phosphorus) disinfection
building waste recycling www.dscrusher.com
Construction waste recycling solution, crushing line. purchase!Tuition fee from $20.000 www.WaldenU.eduComplete A Degree, Masters Or PhD Walden Accredited Online UniversityIron Clogging Solutions Boresaver.com.auApproved iron oxide well cleaner Rehabilitation SpecialistsAds
Read more: http://wiki.answers.com/Q/How_do_effluent_treatment_plants_and_water_treatment_plants_work#ixzz1jpHYtHjd
Home o Product
Groups o Market-
specific Solutions
o Investor Relations
o Press o Jobs &
Careers o Sustainabil
ity o About Us o Industry
Sector o Energy
Sector o Healthcare
Sector
Water Technologies o Products o Services o Parts o Food and Beverage Industry o Life Sciences Industry o Marine Industry o Mining Industry o Oil and Gas Industry o Power Industry o Semiconductor and Solar Industry o Municipal o Aquatics and Leisure o Applications o About Us o Videos o Site Map
Applications o Aquatic Water Treatment o Corrosion and Biofouling Protection
Market-specific Solutions
o Automotiv e
o Chemicals o Constructi
on and Real Estate
o Finance o Food&Bev
erage o Machine
Building o Metals &
Mining o Oil & Gas o Pharmaceu
ticals o Public
Sector o Pulp &
Paper o Tourism &
Leisure o Transporta
ion & Logistics
o Water o Wholesale
/ Retail
o Cross Market Offerings
o Drinking Water Treatment o Groundwater Remediation o High Purity Water o Industrial Process Water o Odor and Vapor Control o Oil & Gas Produced Water o Sludge & Biosolids Treatment o Wastewater Treatment o Water Recycle & Reuse o Water and Wastewater Library o Find a Case Study
Wastewater Treatment
Alkaline Cleaner RecoveryArchimedes / Screw PumpingBiological TreatmentBOD & COD ReductionChemical Feed and
Wastewater Treatment Applications
ControlClarification and SedimentationDisinfectionDissolved Metals RemovalHazardous Waste TreatmentHexavalent Chrome RemovalNutrient RemovalOil and Water SeparationPrimary TreatmentSecondary TreatmentSpent Caustic TreatmentTertiary TreatmentTOC ReductionWater Quality Analyzers and Process Control
Sign up for our FREE newsletter.First Name:Email:
We respect your privacy and will never sell or rent our subscriber list.
Alkaline Cleaner Recovery
Alkaline cleaning is performed on metal parts at different times during the manufacturing process to remove oils, coolants and other metalworking fluids prior to electroplating.
Archimedes / Screw Pumping
Originally applied for drainage and irrigation, today Archimedes screws / screw pumps are commonly used in sewage treatment plants because they cope well with varying rates of flow and suspended solids.
Biological Wastewater Treatment
Biological wastewater
BOD & COD Reduction
Having a safe BOD level in wastewater is essential to producing quality effluent. If the BOD level is too high then the water could be
treatment is a that uses microorganisms to break down complex materials present in the wastewater. It can aid with BOD reduction, odor control and more.
at risk for further contamination, interfering with the treatment process and affecting the end product.
Chemical Feed and Control
Chemical feed and control systems are a vital component in all wastewater treatment applications. Each chemical has its own unique set of challenges that must be taken into consideration in the design, selection and application of the feed system.
Clarification and Sedimentation
Wastewater Clarification, or sedimentation, is a common and essential process in municipal and industrial wastewater treatment plants.
Disinfection
Wastewater disinfection systems prevent the growth of microorganisms, or pathogens, that produce human diseases. Careful measures must be taken when trying to do away with these microorganisms.
Dissolved Metals Removal
Industrial wastewaters containing dissolved metals are treated to reduce the metal contaminants to meet discharge requirements and/or achieve the water quality level needed for reuse and recycling.
Hazardous Waste Treatment
Hazardous wastes are generated as the result of treatment steps performed on industrial wastewaters prior to discharge, or contaminant-containing groundwaters. The treatment process produces a residual waste, including sludge
Hexavalent Chrome Removal
The US EPA has established standards that require the destruction of chromates prior to discharge to avoid the potential risks of surface and drinking water contamination.
and spent media.
Industrial Wastewater Pretreatment
Virtually every industry uses water in its process to one degree or another to make a product or provide a service. This use can be either direct, such as for the production of steam, or indirect, such as for rinsing water for semiconductor chips.
Nutrient Removal
Nutrient removal is achieved by reducing the levels of nitrogen and phosphorus levels with advanced wastewater technologies. Higher quality wastewater effluent is the result of this process.
Oil Water Separation
Wastewater oil water separation is a process that many refineries or other oil processors undergo. Siemens
Primary Wastewater Treatment
Primary wastewater treatment, the second step in the wastewater treatment process, involves the physical
provides applications that can successfully separate oil from wastewater.
separation of suspended solids from the wastewater flow using gravity filters.
Secondary Wastewater Treatment
Secondary wastewater treatment is the 2nd stage of wastewater treatment that takes place after the primary treatment process.
Spent Caustic Treatment
Spent caustic streams from refineries and ethylene production typically have a high chemical oxygen demand (20 - 500 g/L) and contain chemicals that are hazardous, inhibitory, and/or biorefactory.
Tertiary
TOC Reduction
Wastewater Treatment
Tertiary treatment is the next wastewater treatment process after secondary treatment. This step removes stubborn contaminants that secondary treatment was not able to clean up.
Trace organics are a key challenge facing the wastewater industry
Water Quality Analyzers and Process Control
Keep up with increased regulatory and quality control drivers that require better analytical and control techniques to stay within regulated, permitted and/or control limits. See how...
In: Waste and Recycling [Edit categories]
Sewage Treatment Systems www.waspsystems.comCompact | Affordable | 5yr Warranty Available throughout Africa NOWStone Crushing Plant Orientalcrusher.com/CrushingPlantStone& Rock Crusher Plant Design. Quarry Crushing Plant From China!Ads
Answers.com > Wiki Answers > Categories > Science > Biology > Ecology and Bionomics > Environmental Issues > Waste and Recycling > How does a sewage treatment plant work?
Answer: Improve
the sewage plant works by having a primary treatment that help take out all of the excess oil and trash that goes into it then comes the secondary treatment that they put chloride in it to kill all the bacteria or anotherway putting it into an o zone layer which acts like a dienfactant torwards bacteria andlast it mightbe transffered to the river, lake, or stream and afterthat it goes to your homes
Read more: http://wiki.answers.com/Q/How_does_a_sewage_treatment_plant_work#ixzz1jpJ6miVe
Effluent Treatment Plant
ETP SIDE VIEW WITH LAMELLA CLARIFIER, P.S.F. & A.C.F. AND FILTER PRESS
Different technologies for Biological treatment of Effluent/ Sewage Treatment Plant :
The effluent after primary treatment will be subjected to secondary treatment. The major goal of this treatment is to remove soluble Organic Pollutants by oxidation & settling. This involves bringing the active microbes in contact with waste water which consume the impurities as food. These organisms; in presence of Oxygen (O2), convert the
biodegradable organic matter into Carbon Di Oxide (CO2) water, more cell material and other inert products. With the help of this the total BOD reduction will be 90-95%.
-----------------------------------------------------------------------------------------------------------------------------
Bio-Tower
SIDE VIEW OF BIO-TOWER
TOP VIEW OF BIOTOWER (SPRAY NOZZELS)
Advantages:
1. Power Saving as Blowers are not required for aeration2. Space Saving3. Less quantity of sludge generation4. Sludge Recycling is not required5. Bio-sludge can be used as manure for garden6. Applicable for large capacity plants
E.g.
1) Bio Tower Operating in Textile de Sizing Unit 2) Bio Tower Operating in Textile Process House 3) Bio Tower Operating in Garment Dyeing & Washing4) Bio Tower Operating in Automobile Industry5) Bio-Tower Operating in Sewage Treatment
-----------------------------------------------------------------------------------------------------------------------------
SAFF (Submerged Aerated Fixed film), MBBR (Moving Bed Bio-Reactor) or FAB (Fluidized Attached Bacteria)
Fluidized Attached BacteriaSubmerged Aerated Fixed Film
Effluent Treatment Plant
Submerged Aerated Fixed Film Effluent Treatment Plant
Submerged Aerated Fixed Film
In this technology specially designed PVC fills are used as media for Attached Growth of Bacteria to achieve high efficiency & Membrane Diffuser for aeration system for introducing air directly into waste water. Due to the attached growth on the surface of the media we are able to reduce the volume and maintain high efficiency of the system
Our range of waste water treatment plants are based on SAFF, FAB & MBBR that are chosen according to suitability of client’s requirements. Coming in a wide range of capacities these units meet most stringent of norms as well as are also automated to suit client’s requirement & budget. Further, we can also provide these in different unit capacities as demanded by the customers.
Advantages:
1. High Efficiency of the plant2. Due to the attached Growth the volume of Aeration tank can be reduced
3. Need not to maintain MLSS4. Sludge recycling is not required5. Less quantity of sludge generation6. Bio-sludge can be used as manure for garden7. Applicable for large capacity plants (e.g. & picture pending)
Can tv be recycle? Answer it!
Relevant answers: What are the types of sewage treatment plant ?
There are basically two types of sewage treatment plants 1. Chemically treated - where chemicals are added to break down the effluents and disinfect it2. Biologically treated - the effluent is broken...
What is the capacity of a sewage treatment plant ?
Sewage treatment plants are built to meet service requirements so they can be sized for almost any daily flow from a one family home to a large city.
Importance of sewage treatment plant ?
the sewage treatment plant is physically, biologically and chemically clean & safe to discharge back to environment
How does sewage treatment work ?
From an engineer: All organic material (poop) is "eaten" by microorganisms, leaving only minerals. Sewage treatment simply speeds the process. It is similar to burning, which leaves only ash...
How do effluent treatment plants and water treatment plants work ?
A water treatment plant will usually take water from a dammed river. The water is then filtered and purified till it is potable (that is, drinkable). Depending on the quality of the water it may have...
Related ads:
Read more: http://wiki.answers.com/Q/How_does_a_sewage_treatment_plant_work#ixzz1jpJVPpzf
What is effluent treatment plant and water treatment plant?Answer It! In: Waste and Recycling [Edit categories] Save or Cancel Sewage Treatment Systems Compact | Affordable | 5yr Warranty Available throughout Africa NOWwww.waspsystems.comAds
Relevant answers: How do effluent treatment plants and water treatment plants work?
A water treatment plant will usually take water from a dammed river. The water is then filtered and purified till it is potable (that is, drinkable). Depending on the quality of the water it may have...
What are water treatment plants ?
Water treatment plants are set of various installations where raw water drawn for drinking water is subjected to treatment for removal/reducing various impurities present in the raw water to...
Where is karkh water treatment plant ?
The Kharkh Water Treatment Plant is located about 30 kilometers north of Baghdad on the west side of the Tigris River, from which it takes the water to be treated. Kharkh provides about 40 percent of...
Why is a waste water treatment plant necessary?
because some places in the world are running out of water so if there is an alternate way then we wont run out of water
Address of water treatment plant in akola?
Need to know the state which Akola is in.
Answers.com > Wiki Answers > Categories > Science > Biology > Ecology and Bionomics > Environmental Issues > Waste and Recycling > What is effluent treatment plant and water treatment plant?
Sand Making Machine Sand Making Machine Manufacturers, Sand Maker Plant and Stone Crusherswww.orientalcrusher.comJoyal Machinery Co., Ltd Crushing,Screening,Quarry, Grinding Plant,Visit us!www.joyalcrusher.com
Read more: http://wiki.answers.com/Q/What_is_effluent_treatment_plant_and_water_treatment_plant#ixzz1jpJg6QMa
An ISO 9001:2001 Certified Company
Home | Company Profile | Our Team | Our Products | Jobs Done | Clients and Testimonials | Enquiry | Contact Us
Types of Industrial Effluent Treatment PlantsWe offer a wide range of industrial effluent treatment plants for application in paint shop, diaries, paper mills, oil refineries, leather industry, glass factories, chemical and processing industries etc. These industrial effluent treatment plants are designed to provide a pollution free working environment and recycle the water for other applications. All the effluent treatment plants strictly comply with the design specifications laid down by the regulatory authority.
The industrial effluent treatment plants involve different stages of treatment including physio- chemical treatment and biological treatment followed by tertiary treatment. Integrated functions with simple control makes the operation much easier. Our engineers can also custom design effluent treatment plants based on the specific application requirement of the customers. Akar's Industrial effluent plants have a compact design and can be easily installed on the site.
« next »
Our Products
Equipment For Water Treatment Plants
Equipment For Wastewater Treatment Plants
Types of Sewage Treatment Plants
Types of Industrial Effluent Treatment Plants
Types of Water Treatment Plants
Services Offered
Equipment Manufacturing and Supply
Consultancy - Design / Engineering
Construction of Treatment Plants
Erection and Commissioning
Turnkey Projects
Onsite Projects Work
Training Of Our Staff and Personnel of Customers
Customer Service
Operation and Maintenance
Wastewater Recycling Plant
Effluent Treatment Plant for Paint Shop
Paint Shop Effluent Treatment Plants (APPSET)
Our Paint Shop Effluent Treatment Plants (APPSET) have features compact design a completely packaged unit. These next generation plants contain exhaustive chemical treatment in a ready to install packaged steel unit, which is containerized ready to ship. The system comprises of series of chemical reaction tanks working in series to separate or neutralize toxic polluting contaminants including paint in effluent. The treated output can be reused for auxiliary applications.
» Send Enquiry
Effluent Treatment Plant for Textile Dyeing Industry
Textile Dyeing Waste Water Plants / Textile Dyeing Effluent Treatment Plants
Akar has successfully installed Industrial effluent treatment plant for treating waste water in textile dyeing industries across the globe. The effluent from this industry generally consists of high amount of salts such as sodium sulphate or sodium chloride. For the purpose, first Evaporation, then Crystallization of Salts and thereafter centrifuging is done to dewater the salt output from crystallizer. We also offer customization of plants based on the specific requirements of the clients.
» Send Enquiry
Effluent Treatment Plant for Dairy
Akar's Effluent Treatment Plant is a revolutionary way to treat diary factory effluent wastewater. These system are specially designed for the treatment of typical effluent with high concentration of organic matter and nutrient loads related to the production cycle. The advanced system can effectively handle high fluctuations in quality and quantities of effluent at different times. We can also supply additional equipment such as clarifiers, aerators, screens, settling tanks etc. for dairy waste water treatment applications.
» Send Enquiry
Effluent Treatment Plant for Leather Industry
Effluent from leather industries contain different types of contaminants which generally includes chrome and other toxic chemicals. Akar's effluent treatment plants comprises of units for primary and secondary treatment of the effluent. The treatment is complex and requires seamless integration of different process. We have successfully installed various plants for leather processing and tannery effluent treatment.
» Send Enquiry
« next »
Our Products
Equipment For Water Treatment Plants
Equipment For Wastewater Treatment Plants
Types of Sewage Treatment Plants
Types of Industrial Effluent Treatment Plants
Types of Water Treatment Plants
Services Offered
Equipment Manufacturing and Supply
Consultancy - Design / Engineering
Construction of Treatment PlantsErection (Installation) and Commissioning
Turnkey Projects Onsite Projects Work
Training Of Our Staff and Personnel of Customers
Customer Service
Operation and Maintenance Wastewater Recycling Plant
Home | Company Profile | Our Team | Our Products | Jobs Done | Clients and Testimonials | Enquiry | Contact Us
© Akar Impex Private Limited. All Rights Reserved (Terms of Use)Developed and Managed by IndiaMART InterMESH Limited
Loading...
Products & Services
Sewage Treatment Plants & Equipments
Zero Discharge ETP RO Plants
Multiple Effect Evaporators
EIA, EMP & Risk Analysis
Effluent Treatment Plants
Effluent Treatment Plants Sand & Pebbles Activated Carbon & Anthracite Filter Press Bio Methanation Digestion Anaerobic Digestion Industrial Chlorinator Agitators & Mixers
Air Pollution Control Equipments
Solid Waste Management Systems
Water Treatment Plant & Equipments
Effluent Treatment Plants
Share:
We deal in Effluent Treatment Plants. Consolidating our position in the markets, we offer superior grade industrial effluent treatment plants, which have been proved immensely beneficial for controlling the pollution caused by industries. Developed in tune with international quality standard, these plants are sure to last for a long period of time. We offer these industrial effluent treatment plants at industry leading prices.
Effluent Treatment Plants
We offer high performance industrial effluent treatment plants, which are manufactured by us using finest quality of materials to ensure their
Home Profile Products & Services
Media Gallery
Contact Us
Enquiry
Desalination Plants
Wet Scrubber
Showroom
View all our products / services as a slide show.
Hot Offers New Launches
Sewage Treatment Plants
STP For Hospitals, Apartments, Hostels
flawless quality. Incorporated with advanced features, these plants are widely used in diverse industries for the treatment of Effluent.
Features:
Used in anaerobic and aerobic treatment plants.
Effective in biological sewerage treatment plants.
Can be easily diffused in aeration system.
These
STP Machineries & Pre-Fabricated STP Units
Zero Discharge RO & Nano Filtration Plants
Aeration Tank For Biological Treatment
Hot Offers New Launches
Blowers in STP
are belonged to Bio trickling filter class.
Useful for the treatment of chemical oxidation of high COD effluent.
Useful for removing of color for textile effluents.
Wet air oxidation plants for sulfide waste.
Used in carbon filters and pressure
Clarifiers & Clarifloculators
STP Low Profile For Residential Complex
Sewage Water Treatment Plant
Forced Circulation Evaporators
filters. Used
in tertiary treatment plants.
For emulsified and oily waste, these are used with dissolved air flotation process.
Useful in reverse osmosis plants.
Useful in nanofiltration plants, ultra filtration plants.
Types:
Aerobic & Anaerobic effluent treatment plants
Biological Sewerage treatment plants
Diffused aeration system
Bio trickling filters
Chemical Oxidation of high COD effluent
Colour removal for textile
effluents
Wet air oxidation plants for sulfide waste
Send Enquiry
Sand & Pebbles
ESS supplying sand and pebbles in different pore size and mesh size as per customer requirement.Other Information
Pay Mode Terms: Other
Port of Dispatch: chennai/tuticorin
Packaging Details: poly pack
Send Enquiry
Activated Carbon & Anthracite
We offer Activated Carbon & Anthracite For WTP ETP STP. ESS supplying activated carbon (coconut shell based) and Anthrasite carbon which is used in Filter vessels for Water treatment plants, Effluent treatment plants and Sewage treatment plantsOther Information
Pay Mode Terms: L/C (Letter of Credit)
Port of Dispatch: Chennai/Tuticorin
Packaging Details: polypack
Send Enquiry
Filter Press
We supply a wide range of filter press available in vrious capacities, different plate size and different pore size of the filter cloths, which are designed to custom specifications enable to give maximum filtration efficiency, longer life and least maintenance .
Send Enquiry
Bio Methanation DigestionWe provide bio methanation digestion systems, which are used for the purpose of decomposing and separating Organic matter from effluent by micro-organisms in
absence of Oxygen. These digestion are efficient for effluent of bod 7000 PPM. They can also be availed in customized specifications of our clients.
Features:
Low sludge recirculation
Easy operation
No need of gas collection or gas holding
PLC/Embedded controlled
Send Enquiry
Anaerobic DigestionWe design and offer high standard anaerobic digestion systems, which are used to decompose & separate organic matter from effluent by micro-organisms in absence of oxygen. These anaerobic digestion systems convert the organic matter to Methane.
Features:
MoC: Civil/PP tank/steel fabrication
Gas holding: pressure vessel/ flexible sheets over top level
PLC/SCADA/ WEB ENABL
E controlled operation
Desulphurization /demoisturing/ gas engine for energy recovery
Send Enquiry
Industrial Chlorinator
We supply gas chlorinators for sewage treatment, effluent treatment, cooling tower water treatment and raw water disinfection.
Send Enquiry
Agitators & MixersEnviro Solutions & Services manufacture, fabricate, supply erection, testing and commissioning of agitators, mixer, fermentor agitator in different sizes and capacity of preparation tanks.We manufacture high speed agitator, stirrer, agitator for reaction vessels as per the customer requirements.
The agitator consist of the following:
Shaft (MOC: SS or MS,Epoxy coated) in diiferent dia and length
Impellor (MOC: SS or MS,Epoxy coated)
type: cureved vanes, baffle type, propellor type, radial turbine type
Motor Gear
box ( belt drive , direct coupled)
Seal and bearing
Application:
Storage vessels
Lime preparation tank
Chemical preparation tank for mixing
and homogenization
Anaerobic digestor
Send Enquiry
Loading...
Contact us
Mr. G. Thirugnanam10/2, Fifth Cross Extension, Bharathi NagarCoimbatore, Tamil Nadu - 641 006, India Telephone: +(91)-(422)-6556501
Contact via E-mail
Loading...
Contact via Mobile
Contact via SMS
Home | Profile | Products & Services | Media Gallery | Site Map | Contact Us | Enquiry
© Enviro Solutions & Services. All Rights Reserved (Terms of Use)Developed and Managed by IndiaMART InterMESH Limited
Types of Industrial Effluent Treatment PlantsWe specialize in providing a wide range of effluent treatment plants for paint shop, diaries, paper mills, oil refineries, leather industry, glass factories, chemical and processing industries etc. These effluent treatment plants are used by different industries to reduce the potential for pollution and to comply with discharge consent conditions.
Effluent treatment plant utilizes different technologies and processes for treatment of the waste. They can be streamlined for physio-chemical treatment and biological treatment followed by tertiary treatment. Integrated functions with user friendly control makes the operation much easier. Our engineers can also custom design effluent treatment plants based on the specific requirements of the clients.
« back »
Effluent Treatment Plant for Electroplating Industry
We expertise in manufacturing an advanced range of effluent treatment plant for application in electroplating industry. This industry has been primarily categorized as a pollutant industry, due to presence of highly toxic contents such as chrome, cyanide etc. Our effluent treatment plant are specially designed to recover many precious metals such as chrome from the effluent. This not only helps in controlling the pollution but makes the process cost-effective.
» Send Enquiry
Effluent Treatment Plant for Paper Industry
Paper Processing Industrial Effluent Treatment Plant
Akar's effluent treatment plant for pulp and paper industry are based on the latest filter membrane system. The effluent streams can be treated without the fouling problems. This treatment system effectively reduces BOD,COD, TDS, TSS and color contaminants. Liquid fraction is filtered freely without the building up of solids over membrane, thereby reducing the fouling possibilities. The above diagram illustrates the Akar's latest installation supplied 40 Meters dia. Clarifier mechanisms and aeration equipment. Aeration system is completely designed designed by the expert engineers to meet the special application requirement of the client.
» Send Enquiry
Kitchen Wastewater Treatment Plant
We also offer wastewater treatment plants specially designed for filtering solid waste generated from kitchen. These plants can be easily installed in Restaurants, Caterers Kitchens, Hotels and other canteens. Akar has developed a various treatment plant complete with oil skimmers, solid pulper or disintegrator. The solid particles such as are vegetable pieces, leaves etc. are crushed into pulp, so that pump impellers do not get jammed and there is less load on the treatment plant. We have developed special screens for filtering kitchen or canteen wastes.
» Send Enquiry
« back »
Effluent Treatment Plants Share:
We deal in Effluent Treatment Plants. Consolidating our position in the markets, we offer superior grade industrial effluent treatment plants, which have been proved immensely beneficial for controlling the pollution caused by industries. Developed in tune with international quality standard, these plants are sure to last for a long period of time. We offer these industrial effluent treatment plants at industry leading prices.
Effluent Treatment Plants
We offer high performance industrial effluent treatment plants, which are manufactured by us using finest quality of materials to ensure their flawless quality. Incorporated with advanced features, these plants are widely used in diverse industries for the treatment of Effluent.
Features:
Used in anaerobic and aerobic treatment plants.
Effective in biological sewerage treatment plants.
Can be easily diffused in aeration system.
These are belonged to Bio trickling filter class.
Useful for the treatment of chemical oxidation of high COD effluent.
Useful for removing of color for textile effluents.
Wet air oxidation plants for sulfide waste.
Used in carbon filters and pressure filters.
Used in tertiary treatment plants. For emulsified and oily waste, these are
used with dissolved air flotation process. Useful in reverse osmosis plants. Useful in nanofiltration plants, ultra
filtration plants.
Types:
Aerobic & Anaerobic effluent treatment plants
Biological Sewerage treatment plants Diffused aeration system Bio trickling filters Chemical Oxidation of high COD
effluent Colour removal for textile effluents
Wet air oxidation plants for sulfide waste
Send Enquiry
Sand & Pebbles
ESS supplying sand and pebbles in different pore size and mesh size as per customer requirement.Other Information
Pay Mode Terms: Other Port of Dispatch: chennai/tuticorin Packaging Details: poly pack
Send Enquiry
Activated Carbon & Anthracite
We offer Activated Carbon & Anthracite For WTP ETP STP. ESS supplying activated carbon (coconut shell based) and Anthrasite carbon which is used in Filter vessels for Water treatment plants, Effluent treatment plants and Sewage treatment plantsOther Information
Pay Mode Terms: L/C (Letter of Credit) Port of Dispatch: Chennai/Tuticorin Packaging Details: polypack
Send Enquiry
Filter Press
We supply a wide range of filter press available in vrious capacities, different plate size and different pore size of the filter cloths, which are designed to custom specifications enable to give maximum filtration efficiency, longer life and least maintenance .
Send Enquiry
Bio Methanation DigestionWe provide bio methanation digestion systems, which are used for the purpose of decomposing and separating Organic matter from effluent by micro-organisms in absence of Oxygen. These digestion are efficient for effluent of bod 7000 PPM. They can also be availed in customized specifications of our clients.
Features:
Low sludge recirculation Easy operation No need of gas collection or gas holding PLC/Embedded controlled
Send Enquiry
Anaerobic DigestionWe design and offer high standard anaerobic digestion systems, which are used to decompose & separate organic matter from effluent by micro-organisms in absence of oxygen. These anaerobic digestion systems convert the organic matter to Methane.
Features:
MoC: Civil/PP tank/steel fabrication Gas holding: pressure vessel/ flexible
sheets over top level PLC/SCADA/ WEB ENABLE
controlled operation Desulphurization /demoisturing/ gas
engine for energy recovery
Send Enquiry
Industrial Chlorinator
We supply gas chlorinators for sewage treatment, effluent treatment, cooling tower water treatment and raw water disinfection.
Send Enquiry
Agitators & MixersEnviro Solutions & Services manufacture, fabricate, supply erection, testing and commissioning of agitators, mixer, fermentor agitator in different sizes and capacity of preparation tanks.We manufacture high speed agitator, stirrer, agitator for reaction vessels as per the customer requirements.
The agitator consist of the following:
Shaft (MOC: SS or MS,Epoxy coated) in diiferent dia and length Impellor (MOC: SS or MS,Epoxy coated) type: cureved vanes, baffle type, propellor type, radial turbine type Motor Gear box ( belt drive , direct coupled) Seal and bearing
Application:
Storage vessels Lime preparation tank Chemical preparation tank for mixing and homogenization Anaerobic digestor
Send Enquiry