Download - PowerMate15 Technical Specification
Googolplex Electric Company Limited
PowerMate15
Technical Specification(Preliminary Preview)
Rimsky Cheng
12/11/2013
Table of Contents
Introduction..........................................................................................................................................3
Device Overview.............................................................................................................................3
Electrical Features............................................................................................................................4
Device Exterior Overview...............................................................................................................5
Device Interior Overview................................................................................................................7
Power Input and MOSFET Output....................................................................................7
Binary, Analog and Communication Interface..................................................................8
Detail Description...............................................................................................................................10
MOSFET Output............................................................................................................................10
Binary Input...................................................................................................................................10
Analog Input..................................................................................................................................11
Analog Input Configuration.............................................................................................12
OmniBus Interface.........................................................................................................................13
CAN Interface................................................................................................................................13
Cinch Mechanical Dimension............................................................................................................14
Revision History............................................................................................................................15
Introduction
Device Overview
PowerMate15 is a digital switching solution developed for the transportation market. It provides in one package state of the art digital switching technology and easy to understand user interface for designers with an extensive and sophisticated menu of switching solutions.
PM15 Technical Specification 0.0.1 08/10/2013
Electrical Features
• 12V / 24V Nominal Input (10-30V Input Range)
• 75 Ampere Total Input Current Capability at 12V Rating
• 16 MOSFETs Output Rated 25A Each (Switched to Battery ONLY)
• Over-current Protection
• Soft Start for handling high inductive or capacitive loading
• Remote Reset Output Circuit Fault through Keypad
• 16 Digital Sense Input
• 6 Analog Sense Input: 4 Resistive, 2 Voltage Input
• Reverse Battery Protection
• Under-voltage and Over-voltage Protection
• RS485 / CAN Communication support OmniBus Protocol
PM15 Technical Specification 0.0.1 08/10/2013
Device Exterior Overview
Pin Name Description Pin Name Description
J1-1 Binary Input 1 J2-1 PIN_11
J1-2 Binary Input 2 J2-2 PIN_12
J1-3 Binary Input 3 J2-3 PIN_13
J1-4 Binary Input 4 J2-4 PIN_14
J1-5 Binary Input 5 J2-5 PIN_15
J1-6 Binary Input 6 J2-6 PIN_16
J1-7 Binary Input 7 J2-7 PIN_17
J1-8 Binary Input 8 J2-8 Binary Input 9
J1-9 OmniBus Negative J2-9 Binary Input 10
J1-10 OmniBus Positive J2-10 Binary Input 11
J1-11 CAN Bus Low J2-11 Binary Input 12
PM15 Technical Specification 0.0.1 08/10/2013
J1-12 CAN Bus High J2-12 Binary Input 13
Pin Name Description Pin Name Description
J3-1 PIN_21 J4-1 VDDB
J3-2 PIN_22 J4-2 VDDA
J3-3 PIN_23 J4-3 Keypad Power
J3-4 PIN_24 J4-4 GROUND
J3-5 PIN_25
J3-6 PIN_26
J3-7 PIN_27
J3-8 PIN_28
J3-9 Analog Input 3
J3-10 Analog Input 4
J3-11 Analog Input 5
J3-12 Analog Input 6
PM15 Technical Specification 0.0.1 08/10/2013
Device Interior Overview
Power Input and MOSFET Output
Illustration 1: Device Overview
Power connections are provided to the PM15 through three #10-32 Tin-Plated Studs. VDDA and VDDB accept DC Power range from 9-32V and GNDD is the ground of the device.
Designator Name Function
X1 VDDA Bank A Power
X2 GNDD Ground
X3 VDDB Bank B Power
PM15 Technical Specification 0.0.1 08/10/2013
MOSFET STB Outputs are through 6.3mm spade terminals located on the main board. The positionof PIN11 to PIN18, and PIN21 to PIN28 are indicated on the illustration.
Binary, Analog and Communication Interface
Vertical View
Horizontal View
Designator Name Function
1 AIN3 Analog Input 3 (Resistive)
2 AIN4 Analog Input 4 (Resistive)
3 AIN1 Analog Input 1 (Resistive)
4 AIN2 Analog Input 2 (Resistive)
5 CAN_LO CAN Bus Negative
6 CAN_HI CAN Bus Positive
7 AIN5 Analog Input 5 (Voltage)
8 AIN6 Analog Input 6 (Voltage)
9 OMNI_LO RS-485 Omni Bus Negative
10 OMNI_HI RS-485 Omni Bus Positive
11 BIN15 Binary Input 15
12 BIN16 Binary Input 16
13 BIN13 Binary Input 13
14 BIN14 Binary Input 14
15 BIN11 Binary Input 11
16 BIN12 Binary Input 12
17 BIN9 Binary Input 9
18 BIN10 Binary Input 10
PM15 Technical Specification 0.0.1 08/10/2013
Designator Name Function
19 BIN7 Binary Input 7
20 BIN8 Binary Input 8
21 BIN5 Binary Input 5
22 BIN6 Binary Input 6
23 BIN3 Binary Input 3
24 BIN4 Binary Input 4
25 BIN1 Binary Input 1
26 BIN2 Binary Input 2
PM15 Technical Specification 0.0.1 08/10/2013
Detail Description
MOSFET Output
PowerMate 15 has 16 MOSFET Outputs which are rated at 25 Ampere each maximum. All switchescan only Switched to Battery. Each Output is double protected by hardware and software, PowerMate 15 can shut down the MOSFET in case of over-current, and in case of software exception the fuse will be blown to protect the circuit from further damages.
Default Software Setting will switch OFF the MOSFET within 300ms in case of an over-current event. This is programmable to change from 100ms to 3s. For other trip-over values, please consult our sales.
Binary Input
PowerMate 15 has 16 Binary Inputs which are capable of reading Digital High / Low Input. Each Binary Input can be configured as STG Active / STB Active independently:
1. STG Active regards GND as logic “1” input and regards VDD (7-30V) as “0” input.
2. STB Active regards GND as logic “0” input and regards VDD (7-30V) as “1” input.
• ALL Binary Input default configured as STB Active inputs.
Binary Input Model:
When the Pull-Up is set to pull to GND, it can prevent false trigger in case there is water leakage which short the input to the GND. That also prevents the input to be used as one wire low water probe which short to chassis ground through water. Instead, floating micro-switch or 2 wire resistivesensors should be used instead.
PM15 Technical Specification 0.0.1 08/10/2013
Analog Input
PowerMate 15 has 6 Analog Inputs, 4 of them are Resistive Inputs (AN1 - 4) and 2 of them are Voltage Inputs (AN5 - 6).
1. Resistive Input can handles resistive input from 0 – 5k ohm.
• AN1 default configured for 4k ohm resistive input.
• AN2 default configured for 4k ohm resistive input.
• AN3 default configured for 4k ohm resistive input.
• AN4 default configured for 4k ohm resistive input.
2. Voltage Input can handle voltage input from 0 – 30V.
• AN5 / AN6 default configured for 30V input as maximum. Sensitivity of these analog channels can be further improved by decreasing the voltage input range.
3. Monitor VDDA and VDDB inputs.
PM15 Technical Specification 0.0.1 08/10/2013
Analog Input Configuration
Designator Name Function
1, 2 AIN1, AIN1TP Test Point for Analog 1 Resistive Input
3, 4 AIN2, AIN2TP Test Point for Analog 2 Resistive Input
5, 6 AIN3, AIN3TP Test Point for Analog 3 Resistive Input
7, 8 AIN4, AIN4TP Test Point for Analog 4 Resistive Input
9, 10 AIN5, AIN5TP Test Point for Analog 5 Voltage Input
11, 12 AIN6, AIN6TP Test Point for Analog 6 Voltage Input
13, 14 AS1, AS1TP Test Point for Analog 1 Resistive Input Gain Section
15, 16 AS2, AS2TP Test Point for Analog 2 Resistive Input Gain Section
PM15 allows user to adjust the sensitivity of the Analog channels to suit different applications. Please note that in order to adjust Analog Input 1 and 2 (AIN1 / AIN2), user needs to remove the jumper caps P4 and P5 respectively before changing the potentiometer values of either
PM15 Technical Specification 0.0.1 08/10/2013
AIN1/AS1/AIN2/AS2. User must put the jumper caps back on once their finish the configuration.
OmniBus Interface
PowerMate 15 has one RS-485 channel. It can communicate with other PowerMate Series Digital Switching System using OmniBus Interface.
• PowerMate 15 default configured to communicate at 9600 bps (9600, 8-N-1).
• User can retreieve system status such as output pin condition, input pin conditions, current status, analog input values as well as battery status.
CAN Interface
PowerMate 15 has one CAN channel. It can communicate with other PowerMate Series Digital Switching System using CAN Interface.
• PowerMate 15 default configured to communicate at 250kbps.
• PowerMate 15 supports J1939 Protocol, and would be able to intercept packages such as CCVS (Vehicle Speed), ENG_RPM (Engine Rate per Minute).
• Common Status that would be able to get from CAN Bus include:
◦ Vehicle Speed
◦ Engine Rate per Minute
◦ Park Brake
◦ Gear Position
• Further customization is possible to suit client's needs.
PM15 Technical Specification 0.0.1 08/10/2013
Cinch Mechanical Dimension
PM15 Technical Specification 0.0.1 08/10/2013
Revision History
Revision Author Description Date
0.0.1 Rimsky Cheng Preliminary Preview 15/08/2013
0.0.2 Rimsky Cheng Added Illustration 09/10/2013
PM15 Technical Specification 0.0.1 08/10/2013