Download - FAAC International PL
O p e n i n g a W h o l e N e w W o r l d
for all Systems, Productsand Accessories
P r i c e L i s t 2 0 0 9
Swing Gate OperatorsSlide Gate Operators
Barrier Gate OperatorsAccessories
FAAC is the world’s largest specializedmanufacturer of gate operating equipment.
Low Voltage Operators . . . . . . . . . . . . . . . 4
Conventional Operators
Swing Gate Operators . . . . . . . . . . . . 18
Barrier Gate Operators . . . . . . . . . . . 72
Barrier Gate Accessories . . . . . . . . . 85
Bollards Coming Soon! . . . . . . . . . . . . .
Accessories . . . . . . . . . . . . . . . . . . . . 99
Slide Gate Operators . . . . . . . . . . . . 102
Automated Systems for . . . . . . . . . . . . .Swing Doors Coming Soon!
Exploded Views . . . . . . . . . . . . . . . . . . . 125
Contents
Con
tent
s
2009 Price List
LowVoltageSystem
s
Swing Gate Operators
Model 390 . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Model 415 . . . . . . . . . . . . . . . . . . . . . . . . . 8
In-ground OperatorModel 770 . . . . . . . . . . . . . . . . . . . . . . . . 12
Slide Gate OperatorModel 740 . . . . . . . . . . . . . . . . . . . . . . . . . 16
Contents
3
4
Model 390
Model390
FAAC operators for swinging gates areamong the safest available. The anti-entrap-ment and safety provided by all gate opera-tors can and should be improved with photo-cells, loop detectors, sensing edges and/orother similar devices. FAAC strongly recom-mends that devices such as these beinstalled with all automated gate systems.
To guarantee the safety and efficiency of itsequipment, FAAC strongly recommends thatqualified personnel test the safety system onan annual basis, as well as maintain theoverall hydraulic or mechanical system.
Low Voltage Swing Gate Operator
.Designed for residential use
. Two year limited warranty(see back cover)
Model 390 Electromechanical Swing Gate Operator
NOTE: Operator specifications are approximate. Environmental factors can change theperformance of the operator.
The 390 is also ideal for swinging garage doors.
Model 390
The Model 390 was designed primarily to accom-modate large pillar installations.
. Easy installation
. No gate modifications are necessary
. Operates even in case of power failure (with optionalbattery back-up and subject to battery condition)
. Reverse on contact
. Slow down “soft stop”
Specifications
Duty cycleMaximum gate swing90 degree opening timeMaximum weight per gate leafMaximum length per gate leafApprox. operating temperature rangeVoltage
Absorbed powerProtection class
100%120 degrees13 seconds600 pounds (181.4 kg)14 feet (3 m)-4°F to131°F (-20°C to 55°C)Primary: 115vacSecondary: 24vdc (100va transformer)3 WNema 4x
Batteriesare for
emergency back-
up
only; notneeded t
o run
system under normal
conditions.
UL 325COMPLIANTCSI # 02820 -Gate Operators
5
Model 390 Electromechanical Swing Gate Operator
Model Package Includes Shipping Wt Voltage Part Number Price(approx.)
Model 390 Operator, 425D control panel, 14x16 enclosure, transformer 58 lbs. (26.3kg) 24vdc 104572.5* $1834Basic Single Kit batteries (2), and 2 limit switches (Transformer)
Model Package Includes Shipping Wt Voltage Part Number Price(approx.)
390 Operator Only Use to make the single kit into a master/slave (bi-parting) 24 lbs. (10.9kg) 24vdc 104572 $829kit; or use to order replacement operator. Order necessary (Transformer)length needed for system of five wire cable at no charge;maximum 40 ft per system; part number is 2194 or add2 limit switches
To make the above a master/slave (bi-parting) system use the following:
To complete your gate system installation, or for replacement purposes, the following peripherals can be ordered:
* If you have any questions regarding your application, please call FAAC’s technical department at 1-800-221-8278.
Model Package Includes Shipping Wt (approx.) Voltage Part Number Price
Battery Two batteries are needed (replacement only) 6 lbs. (2.7 kg) 12vdc 3540 $58
(7.2 amp hour)
Limit Switch Shuts operator off; serves as positive stop; one 1 lbs. (.45 kg) 390682 $31limit needed for open stop, another for closed stop
Transmitter FAAC single button 1 lbs. (.45 kg) 1tm418ds $38FAAC two button 787317 $45
Photobeam Directional with diagonal alignment; required for UL-325 compliance 1 lbs. (.45 kg) 785163 $210
Receiver FAAC single channel 1 lbs. (.45 kg) 1rp418ds $68
Five Wire cable N/A 2194 3.15/ft
Transformer 24vdc; 100va (replacement only) 5 lbs. (2.3 kg) 24vdc 2114 $108
425D Control Panel24vdc (replacement only) 2 lbs. (.9 kg) 24vdc 790930 $587
6
Model Package Includes Shipping Wt Part Number Price
390 Arm Articulated replacement arm 4 lbs. 738705 $236
Visit us online at
www.faacusa.com
7
8
FAAC operators for swinging gates are amongthe safest available. The anti-entrapment andsafety provided by all gate operators can andshould be improved with photocells, loopdetectors, sensing edges and/or other similardevices. FAAC strongly recommends thatdevices such as these be installed with allautomated gate systems.
To guarantee the safety and efficiency of itsequipment, FAAC strongly recommends thatqualified personnel test the safety system on anannual basis, as well as maintain the overallhydraulic or mechanical system.
Model 415
Model415
Electromechanical Swing Gate Operator
.Designed for residential use
. Two year limited warranty(see back cover)
Model 415 Electromechanical Swing Gate Operator
UL 325COMPLIANTCSI # 02820 -Gate Operators
Model 415
Model 415 dimensions
The Model 415 was designed to provide powerand versatility to an economical residential swingoperator.
Features. Sleek design. Sealed limit switches
Specifications
Duty cycle
Maximum gate swing
90 degree opening time
Maximum weight per gate leaf
Maximum length per gate leaf
Approx. operating temperature range
Voltage
Power Consumption
Current Consumption
Effective Stroke
Protection class
100%
110 degrees
13 seconds
700 pounds (317.5 kg)
15 feet (4.6 m)
-4°F to131°F (-20°C to 55°C)
Primary: 115vac
Secondary: 24vdc (100va transformer)
70 W
3 A
15 in. (38.1 cm)
Nema 4x
NOTE: Operator specifications areapproximate. Environmental factorscan change the performanceof the operator.
Batteries are for
emergencyback-up
only; not needed to run
system
under normal condition
s.
9
Model 415 Electromechanical Swing Gate Operator
Model Package Includes Shipping Wt Voltage Part Number Price(approx)
415 Basic Single Kit Operator, 425D control panel, 14x16 enclosure, transformer, 58 lbs. (26.3kg) 24vdc (Transformer) 10441811.5* $1689and batteries (2)
Model Package Includes Shipping Wt Voltage Part Number Price(approx)
415 Operator Only Use to make the single kit into a master/slave (bi-parting) kit; or use to order 25 lbs. (11.3 kg) 24vdc (Transformer) 10441811 $789replacement operator. Order necessary length needed for system of five wirecable at no charge; maximum 40 ft per system; part number is 2194
To make the above a master/slave (bi-parting) system use the following:
To complete your gate system installation, or for replacement purposes, the following peripherals can be ordered:
Model
Battery (7.2 amp hour)
Shipping Wt(approx.)
6 lbs. (2.7 kg)
1 lbs. (.45 kg)
1 lbs. (.45 kg)
1 lbs. (.45 kg)
1 lbs. (.45 kg)
N/A
5 lbs. (2.3 kg)
2 lbs. (.9 kg)
Voltage
12vdc
24vdc
24vdc
Part Number
3540
1tm418ds
787317
785163
1rp418ds
2194
2114
790930
Price
$58
$38
$45
$210
$68
3.15/ft
$108
$587
Package Includes
Two batteries are needed (replacement only)
FAAC single button
FAAC two button
Directional with diagonal alignment; required for UL-325 com-pliance
FAAC single channel
For use with master or master/slave system; (included with basickit, see above)
24vdc; 100va (replacement only)
24vdc (replacement only)
Transmitter
Transmitter
Photobeam
Receiver
Five Wire cable
Transformer
425D Control Panel
* If you have any questions regarding your application, please call FAAC’s technical department at 1-800-221-8278.
10
Visit us online at
www.faacusa.com
11
12
Model 770
Model770
FAAC operators for swinging gates are amongthe safest available. The anti-entrapment andsafety provided by all gate operators can andshould be improved with photocells, loopdetectors, sensing edges and/or other similardevices. FAAC strongly recommends thatdevices such as these be installed with allautomated gate systems.
To guarantee the safety and efficiency of itsequipment, FAAC strongly recommends thatqualified personnel test the safety system on anannual basis, as well as maintain the overallhydraulic or mechanical system.
In-ground Swing Gate Operator
.Designed for residential use
. Two year limited warranty(see back cover)
Model 770 Electromechanical Swing Gate Operator
SpecificationsDuty cycleMaximum gate swing90 degree opening timeMaximum weight per gate leafMaximum length per gate leafApprox. operating temperature rangeVoltage
Power consumptionCurrent consumptionProtection class
100%110 degrees (140 or 180 degrees with optional kit)13 seconds800 pounds (363 kg)10 feet (3 m)-4°F to131°F (-20°C to 55°C)Primary: 115vacSecondary: 24vdc (100va transformer)70 W3 ANema 4x
NOTE: Operator specifications areapproximate. Environmental factors canchange the performance of the operator.
* If you have any questions regarding your application, please call FAAC’s technical department at 1-800-221-8278.
Model 770 in-ground application
The Model 770 was designed for in-ground installation so asnot to detract from the appearance of the gate.
Features. Invisible installation. Minimized “pinch points”. Reverse on contact. Operates even in case of power failure
(subject to battery condition). Slow down “soft stop”. Optional 140o or 180o opening kits available
UL 325COMPLIANTCSI # 02820 -Gate Operators
13
Model 770 Electromechanical Swing Gate Operator
Model
770 Basic Single Kit
Shipping Wt(approx.)
98 lb. (44.5 kg)
Voltage
24vdc(Transformer)
Part Number
106753.5*
Price
$2299
Package Includes
Operator, support box, 425D control panel, 14x16 in.enclosure, transformer and batteries (2).
Model
770 Operator Only
Support Box
Shipping Wt(approx.)
24 lb. (10.9 kg)
36 lb (16.3 kg)
Voltage
24vdc(Transformer)
Part Number
106753
490065
Price
$899
$414
Package Includes
Use to make the single kit into a master/slave (bi-part-ing) kit; or use to order replacement operator. Order nec-essary length needed for system of five wire cable at nocharge; maximum 40 ft per system; part number is2194
Needed with operator for bi-parting system
To make the above a master/slave (bi-parting) system use the following:
To complete your gate system installation, or for replacement purposes, the following peripherals can be ordered:
Model Package Includes Shipping Wt Voltage Part Number Price(approx.)
Battery (7.2 amp hour) Two batteries are needed (replacement only) 6 lbs. (2.7 kg 12vdc 3540 $58
Transmitter FAAC single button 1 lb. (.45 kg) 1tm418ds $38
Transmitter FAAC two button 1 lb. (.45 kg) 787317 $45
Photobeam Directional with diagonal alignment; required for UL-325 compliance 1 lb. (.45 kg) 785163 $210
Receiver FAAC single channel 1 lb. (.45 kg) 1RP418ds $68
Five Wire Cable 1 lb. (.45 kg) 2194 3.15/ft
140 Degree Opening Kit Use to increase opening capacity to 140 degrees 390612 $166
180 Degree Opening Kit Use to increase opening capacity to 180 degrees 490111 $467
Positive Stop Kit (Open) Use for bolt on positive stop in the open position 2 lb. (.9 kg) 722121 $46
Positive Stop Kit (Closed) Use for bolt on positive stop in the closed position 2 lb. (.9 kg) 722122 $115
Transformer 24vdc; 100va (replacement only) 5 lb. (2.3 kg) 24vdc 2114 $108
425D Control Panel 24vdc (replacement only) 2 lb. (.9 kg) 24vdc 790930 $587
14
Visit us online at
www.faacusa.com
15
16
Model740
FAAC operators for sliding gates are amongthe safest available. The anti-entrapmentand safety provided by all gate operators canand should be improved with photocells, loopdetectors, sensing edges and/or other similardevices. FAAC strongly recommends thatdevices such as these be installed with allautomated gate systems.
To guarantee the safety and efficiency of itsequipment, FAAC strongly recommends thatqualified personnel test the safety system onan annual basis, as well as maintain theoverall hydraulic or mechanical system.
Slide Gate OperatorModel 740
.Designed for residential use
. Two year limited warranty(see back cover)
Model 740 Slide Gate Operator
Model 740 (24 volt)
The Model 740 was designed as a rack & pin-ion operator for residential applications usinga gate weighing a maximum of 880 pounds.
.Gate automatically locks when not operating
. Slow down “soft stop” on opening and closing
. Operates even in case of power failure(subject to battery condition)
. External limits
. Convenient manual release
Model
Model 740 Single Basic Kit (no peripherals)
742D Control Panel (replacement only)
Gear Rack (3.28 ft) (Nylon)
Battery Back-up Kit
Battery
Shipping Wt(approx.)
30lb. (13.6 kg)
2 lb (.9 kg)
1 lb (.45 kg)
Voltage
24vdc(Transformer)
12vdc
12vdc
Part Number
10978021
790939
719325
390901
7550075
Price
$1,050
$588
$50
$132
$53
Kit Includes
1 Operator, 1 Control Panel,Transformer, Foundation plate (12” x 7”)
To add battery function to your system,kit includes: 2 batteries (1.2 amp hour)wiring cable, support bracket (fits insidecover)
1.2 amp hour (replacement only)
Specifications (Rack & Pinion configuration only)Voltage Primary: 115vac
Secondary: 24vdc (100va transformer)
Duty Cycle 100%
Maximum weight per gate leaf 880 lb (399 kg)
Maximum length per gate leaf 30 ft (9.1 m)
Absorbed power/absorbed current 70 W/3 A
Approx. operating temperature range -4°F to 131°F (-20°C to 55°C)
NOTE: Operator specifications are approximate. Environmentalfactors can change the preformance of the operator.
NOTE: Due to the size of the Model 740 transformer, it requires: (A) a separate enclosure with electrical outlet mounted at the gate site (see accessory below) or (B) the gatesystem is plugged into an electrical outlet INSIDE the residence.
17
Gate System Safety Brochure . . . . . . . . 20Choosing the Correct Operator . . . . . . . 23Four Decisions . . . . . . . . . . . . . . . . . . . . . 23Mounting Geometry . . . . . . . . . . . . . . . . . 26Model 412 . . . . . . . . . . . . . . . . . . . . . . . . 29Model 415 . . . . . . . . . . . . . . . . . . . . . . . . 35Model 400 . . . . . . . . . . . . . . . . . . . . . . . . 41Model 402/422. . . . . . . . . . . . . . . . . . . . . 48Model 750 . . . . . . . . . . . . . . . . . . . . . . . . 55Model 760.................................................63
Contents
Conventional
SwingOperators
006 Pice List
UL Class 325 Descriptions & FAAC Operators
FAAC Models Duty Cycle Typical UseaResidentialvehicular gateoperator
Commercial/General accessvehicular gateoperator
Industrial/Limited accessvehicular gateoperator
Restricted Accessvehicular gateoperator
400/402/412415/422/620640/750/760
400/620/640
400/620/640
620/640
Limited duty
ContinuousDuty
ContinuousDuty
ContinuousDuty
• Home use• Small apartment building, upto 4 units per building, limitedpublic access
• Apartment buildings• Open public access
• No public access
• Prison related security
Class
Class1
Class2
Class3
Class4
18
Since 1965, FAAC has become an industry leader in the development and promotionof safer automated gate systems.
FAAC operators for swinging and sliding gates are among the safest available. Theanti-entrapment and security protection provided by all gate operators can and shouldimproved with photobeams, loop detectors, sensing edges and/or other similardevices. FAAC strongly recommends that devices such as those highlighted in thisbrochure be installed with all automated gate systems.
19
1
18
8
5
5
3
Safety AComplete Swing Gate SystemDesigned with Safety in Mind
To guarantee the safety and efficiency of its equipment, FAAC also stronglyrecommends that qualified personnel perform an annual safety test on yourgate system, as well as maintain the overall hydraulic or mechanical system.
4
6
What is UL 325 and why is it important?
In order to prevent personal injuries associated with automated gate systems, United Laboratories (UL), along with several government-sponsored consumer safety organizations, developed what is called the UL 325 Standards for gate safety (much the same as has now beendone with automatic garage door systems). These standards are meant to protect people, not vehicles, by providing at least two types ofsafety measures (primary and secondary) in the event a person becomes entrapped by the gate system. Consequently, every manufacturermust have their products tested at an approved laboratory to ensure that their safety measures work. For FAAC, our safety measures includea hydraulic bypass as primary and photobeams as secondary...and we've been providing these safety standards for more than 40 years!
FAAC will be happy to package your gate system so that it can be UL 325 compliant, right out of the box. For more information on additionalaccess control options, refer to the “ACCESSORIES CATALOG” section on the Home Page of our web site at www.faacusa.com.
20
Gate OperatorThe swing gate operator(either gate-mounted or in-ground) automates the gate.
LoopsNormally used to activate traffic lights, In-ground loop detectors can also signal yourgate operator to open or close. Butremember, they are designed to protectvehicles only, not to protect pedestri-ans or individuals inside the fenced area.
PhotobeamsPhotobeams protect anythingthat “breaks” the beam (vehi-cles, pedestrians, animals and,especially, children) whichcauses a reversal of the gateoperators. Two sets of photo-beams are recommended forbest coverage.
Free ExitFor residential purposes, this in-ground loopor radio system automatically opens andcloses your gate system to allow guests orvisitors to exit your property without youhaving to do anything.
Gate-safe: During power outages, the hydraulic operator can be configured toallow the gate to be pushed open, permitting emergency access to your property.
Gate-secure: During power outages, your gate stays closed and locked.
Your gate system can also be set up to provide specialsafety options, including “Gate-safe” and “Gate-secure”configurations (refer also to #9 on this sheet).
Gate stops are required onall FAAC gate systems.Stops limit the extent ofgate travel and help pro-
tect the operator from damaging wearand tear. Stops can be fabricated and
attached to the gate leaves, but don’t look particularly attractive and canalso create unsafe “pinch points.” These problems can be solved byinstalling gate stops that are totally concealed inside the gate operatorcover.
Warning LightA warning light will alert anyonenear the gate of its imminentmovement plus helps toilluminate the gate area.
Gate Stops (concealed)
Battery Back-upHaving a battery back-up unit aspart of your gate system providesthe peace of mind of knowing thatyour gate will continue to operateeven if the power goes out.
Control PanelThe “brain” of the gate system, the control panel is usuallyhoused in a fiberglass or metal, weather-resistant enclosurealong with other important access control devices. Forsecurity and safety, it is recommended that this enclosurebe lockable. Another recommended option is to install a“pre-wired” control system from the manufacturer thatprovides accurate, organized wiring which is extremelyhelpful in future troubleshooting or repairs.
Access Control OptionsA variety of access control devices are available, includingthese conventional options:• Keypad: provides multiple codes for different visitors suchas relatives, workers, regular deliveries, etc.• Keyswitch/card reader: simplified access control using aspecial key or coded plastic card.• Telephone entry: connects to existing phone line and fea-tures distinctive ring to alert you that someone is at thegate. Gates can be opened from the phone itself, and a“hold open” feature allows for gates to remain open forextended periods of time.• Radios: radio receiver plugs into control panel and trans-mitters are conveniently kept in vehicles or on key ring.
19
9
8
7
4
3
2
2Gate Safety System
76
5
GATE-SAFE
1
GATEINSIDE
21
Features/Operators 415 415-24V 402 422 400 400EG
Max leaf length (ft.) 15 15 10 10 16 18Max leaf length (ft.)w/ External Lock 15 15 10 10 23 23
Maximum Force Output 675 630 1550 1550 1740 1740
Duty (1) Medium Continuous Medium Medium Continuous Continuous
Use Frequency(Cycles per hour) 25 75 55 55 80 80
Power Supply (V) 115 24 115 or 230 115 or 230 115 or 230 115 or 230
Alternative PowerSupply Source
BC Pro 1050 24V SourcesBC Pro 1050(115V or 700i
(230V)
BC Pro 1050(115V or 700i
(230V)
BC Pro 1050(115V or 700i
(230V)
BC Pro 1050(115V or 700i
(230V)Battery (AC Power Failure) No Yes (Optional) No No No No
Anti-Crushing Protection Electronic Electronic Hydrolic By-Pass+Electronic
Hydrolic By-Pass+Electronic
Hydrolic By-Pass+Electronic
Hydrolic By-Pass+Electronic
End Travel Declaration Timed Self-Learning Timed Timed Timed Timed
Rod Effective Stroke (in.) 15 3/4 15 3/4 9 9 1/2 10 15
Max Opening Angle(Degrees) 110 110 90 100 110 125
Forced Gate Resistance(lbs. on 6’ leaf) 290 290 220 (2) 220 (2) 300 (2) 300 (2)
Built-In Mechanical StopsNo Stops Required(Limit Switches)
No Stops Required(Limit Switches)
Optional(Model - 80)
Optional(Model - 80)
Optional(Model - 84)
Optional(Model - 84)
Product Life Expectations(Cycles) 200,000 (4) 200,000 1,000,000 (5) 1,000,000 1,000,000 1,000,000
Transmissionw/ Low-Temp
Grease
Transmissionw/ Low-Temp
GreaseOil Bath
TransmissionOil Bath
TransmissionOil Bath
TransmissionOil Bath
Transmission
Cost (Single Basic Kit) $1,419.00 $1,689.00 $2,010.00 $2,320.00 $2,525.00 $2,725.00
CHOOSING LINEAR STYLE SWING GATE OPERATORS
(1) LIGHT duty: Single residence application(1-2 Families) MEDIUM duty: Subdivision application (10-30 Families) CONTINUOUS duty: Apartmentcomplex applicaton (> 30 families) and industrial, public and commercial applications.(2) The hydrolic operators do not undergo permanent damages (repairable)(3) About 10 years at 15 cycles/day(4) About 10 years at 55 cycles/day(5) About 10 years at 280 cycles/day
22
Selecting the Correct Operatorfor the Application
THERE ARE FOUR “DECISIONS”THAT YOU NEED TO MAKE BEFORESELECTING A GATE OPERATOR.
DECISION #1:WHICH DIRECTION TO SWING THE GATE?
FAAC gate mounted and in-ground operators can swing gates either inward or outward. Gatemounted operators can be kept inside the property, while the direction of gate swing is best fortraffic flow. In-ground operators are mounted beneath the gates. These options reduce opportu-nities for vandalism and improve appearance.
Inward Swing (gate mounted operator)
Outward Swing (gate mounted operator)
House
Street
FAAC offers many different models of swing gate operators. Models are designed to fit certain applications.
The following pages provide background information to help you select thebest operator for your application.
* If you have any questions regarding your application, please call FAAC’s technical department at 1-800-221-8278.
23
Drive
* If you have any questions regarding your application, please call FAAC’s technical department at 1-800-221-8278.
DECISION #3:SPEED AND LEAF LENGTH
Some thought should be given to the speed at which the gate will travel. The longer the gate leaf,the faster the traveling edge must move to clear an area in a given amount of time.
A speed of 40 feet/minute (12.2 meters/minute) is a “bench mark” velocity. It permits efficient operation whilelimiting the energy in the moving gate leaf. The lower the energy, the less chance of damage to property or injury topeople in the event of accidental contact with the moving gate.
Examples illustrating the relationship betweenoperator speed, gate leaf length,
and the velocity of the leaf’s traveling edge
EXAMPLE:Velocity of the travelingedge of an 8 ft (2.4 m) leaf[in feet/m and (meters/m)]
126 fpm (38 mpm)63 fpm (19 mpm)50 fpm (15 mpm)44 fpm (14 mpm)33 fpm (10 mpm)
Speed options availablewith FAAC Operators(in seconds needed toswing a gate 90o)
6 sec.12 sec.15 sec.17 sec.23 sec.
Longest leaf which can beused if the velocity of thetraveling edge is not toexceed 40 fpm (12.2 mpm)
2.5 ft (0.8 m)5 ft (1.5 m)6 ft (1.9 m)7.5 ft (2.3 m)10 ft (3 m)
DECISION #2:HOW MANY DEGREES OF SWING ARE REQUIRED?
.One FAAC gate operator (Model 750) can swing a gate up to 180o.
. All other models of FAAC operators can swing a gate 90o to 148o.
. Openings which require swings greater than 90o will need certain FAAC operator models.
. The swing of an operator applies equally to inward or outward swinging gates.
All FAAC operators: Models 412, 402, 422,400, 750, 760
Models 412, 400, 750, 760. Models 400, 750, 760.
Models 400 EG(extended geometry),750, 760.
Models 750 (up to 180o),760 (up to 148o with “soft stop”)
90o
140o125o
110o 115o
Street
Drive Drive Drive
Drive
Street Street
Street Street
24
DECISION #4:WHAT TYPE OF MOUNTING GEOMETRY?
Decisions regarding mounting geometry apply to gate mounted operators: Models 412,415, 402, 422 and 400.
As shown in the diagrams below, the operators must be mounted at an angle to the gate. Correct mounting geome-try assures that the desired degrees of swing are achieved, that the gate speed is correct, and that the operator andgate will operate properly and have a long life.
Example of a mounting for an inward swinging gate.
Sometimes a column must be notchedin order to accommodate the correctmounting geometry.
Sometimes the mounting measurements willresult in a flush mounting
Example of a mounting for an outward swinging gate.
Note: If, in your installation, notching a column isnot practical, other solutions are available:1. Install operators using an outward swing.2. Upgrade to an operator with more mounting
flexibility.3. Use an in-ground operator (see Model 750
on page 55 or Model 760 on page 63).
Notched col-umn
1. 2.
3. 4.
Special Situations
* If you have any questions regarding your application, please call FAAC’s technical department at 1-800-221-8278.
25
B
C
AD E
* For A and B, if you choose one of these values with one asterisk, then you must choose the other values with one asterisk; the valuesassume a column that measures less than 20” square.
** For A and B,, if you choose one of these values with two asterisk, then you must choose the other values with two asterisk; the valuesassume a column that measures less than 20” square.
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual orcontact our technical department at 1-800-221-8278.
Model 90° Swing 110° Swing 115° Swing 125° SwingA 5 in. (12.7 cm) – 4 in. (10 cm) –
B 5 in. (12.7 cm) – 4.75 in. (12 cm) –
C 28 in. (71.12 cm) – 28 in. (71.12 cm) –
D not a constraint – not a constraint –
A 7.875 in. (20 cm)* or 11 in. (29 cm)** – 5.75 in. (14.6 cm)** 4.75 in. (13 cm)
B 7.5 in. (19 cm)* or 3 in. (7.5 cm)** – 7 in. (17.8 cm) 6.625 in. (17 cm)
C 32.75 in. (83.19 cm) – 32.75 in. (93.19 cm) 32.75 in. (83.19 cm)
D not a constraint – not a constraint not a constraint
A 4.5 in. (11.4 cm) – – –
B 4.5 in. (11.4 cm) – – –
C 26.25 in. (66.68 cm) – – –
D not a constraint – – –
A 5.75 in. (14.5 cm) 4.875 in. (12.5 cm) – –
B 5.75 in. (14.5 cm) 4.875 in. (12.5 cm) – –
C 24 in. (60.96 cm) 24 in. (60.96 cm) – –
D not a constraint not a constraint – –
A 4.75 in. (12 cm) – – –
B 4.75 in. (12 cm) – – –
C 28.25 in. (71.45 cm) – – –
D not a constraint – – –
A 3.125 in. (7.94 cm) – – –
B 3.125 in. (7.94 cm) – – –
C 23.75 in. (60.33 cm) – – –
D not a constraint – – –
E Must be less than A
400 standard,high speed,
and slow speed models
400 EG (Extended Geometry)
402
412
422
422 VHS
All Models
Mounting Geometry
Outward Swing
26
B
C
EAD
Model 90° Swing 110° Swing 115° Swing 125° SwingA 5 in. (12.7 cm) – 4 in. (10 cm) –
B 5 in. (12.7 cm) – 4.75 in. (12 cm) –
C 38.1875 in. (71.12 cm) – 38.1875 in. (97 cm) –
D up to 4 in. (10 cm) – up to 2 in. (5 cm) –
A 7.875 in. (20 cm)* or 11.5 in. (29 cm)** – 5.75 in. (14.6 cm)** 4.75 in. (13 cm)
B 7.5 in. (19 cm)* or 3 in. (7.5 cm)** – 7 in. (17.8 cm) 6.625 in. (17 cm)
C 47.625 in. (121 cm) – 47.5 in. (120 cm) 47.5 in. (120 cm)
D up to 5.25 in. (14 cm)* or 10 in. (25.5 cm)** – up to 3.5 in. (8.9 cm)** up to 2.875 in. (7 cm)
A 4.5 in. (11.4 cm) – – –
B 4.5 in. (11.4 cm) – – –
C 35.5 in. (90.2 cm) – – –
D 2 in. (5.1 cm)*** – – –
A 5.75 in. (14.5 cm) 4.875 in. (12.5 cm) – –
B 5.75 in. (14.5 cm) 4.875 in. (12.5 cm) – –
C 36.25 in. (92.1 cm) 36.25 in. (92.1 cm) – –
D up to 4 in. (10 cm) up to 3.125 in. (8 cm) – –
A 4.75 in. (12 cm) – – –
B 4.75 in. (12 cm) – – –
C 36.25 in. (92.1 cm) – – –
D up to 2 in. (5.1 cm)*** – – –
A 3.125 in. (7.94 cm) – – –
B 3.125 in. (7.94 cm) – – –
C 30.25 in. (76.84 cm) – – –
D up to 2 in. (5.1 cm)*** – – –
E Must be less than A
400 standard,high speed,
and slow speed models
400 EG (Extended Geometry)
402
412
422
422 VHS
All Models* For A, B, and D, if you choose one of these values with one asterisk, then you must choose the other values with one asterisk; the
values assume a column that measures less than 20” square.** For A, B, and D, if you choose one of these values with two asterisk, then you must choose the other values with two asterisk; the
values assume a column that measures less than 20” square.*** If greater than this value, construct a recess liner.
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to theInstallation Manual or contact our technical department at 1-800-221-8278.
Mounting Geometry
Inward Swing
27
Model 412
Model412
FAAC operators for swinging gates are amongthe safest available. The anti-entrapment andsafety provided by all gate operators can andshould be improved with photocells, loopdetectors, sensing edges and/or other similardevices. FAAC strongly recommends thatdevices such as these be installed with allautomated gate systems.
To guarantee the safety and efficiency of itsequipment, FAAC strongly recommends thatqualified personnel test the safety system on anannual basis, as well as maintain the overallhydraulic or mechanical system.
Electromechanical Swing Gate Operator
. Designed for residential applications
. Two year limited warranty(see back cover)
29
Model 412 Electromechanical Swing Gate Operator
.One 455 D control panel which operatessingle leaf or master/slave gates
. Choice of 6 operating modes including:- “pulse-to-open, pulse-to-close”- automatic timed closure- “man present” (separate open andclose contacts)
. 30 VDC power for accessories
. 115 VAC
The Model 412’s electromechanicaloperation is ideal for residential applications.
The 412 is not recommended for use with solid gates or in highwind situations.
Model 412 HIGH VOLTAGE includes:
. Designed for light residential, single family use
. UL 325 compliant
. Mechanical locking in the opened and closed positions
. Easy interconnection of loop detectors, photocells, etc.to reverse a gate if an obstacle is sensed. Easy interconnection of actuating devices likeremote control radios, key pads and telephoneentry systems. On-board diagnostic LEDs. Convenient manual release in case of power failure
* Measurements and weights stated in this Price List are approximate and subject to change withoutnotice. For exact specifications, please refer to the Installation Manual or contact our technical depart-ment at 1-800-221-8278.
Parameter
Application
Cycles per hour
Maximum gate swing
90 degree opening time
Maximum weight per gate leaf
Maximum length per gate leaf
Approx. operating temperature range
Mechanical locking
Voltage
Model 412 Operating Specifications
Model 412 kit for bi-parting gates: major components (not to scale)
High Voltage
Single family residence, single leaf or bi-parting gate(vehicles only, not for pedestrian use)(not recommended for solid gates)
18
110 degrees
13 seconds
500 pounds, (226.8 kg)
14 feet (4.2 m)
-4oF to 131oF (-20oC to 55oC)
Available in opened and closed positions
115 VAC
39.25
in.(99
.8cm)
23.75
in.(60
.2cm)
3.75 in. (9.5 cm)
3.75 in.
(9.5 cm)7.5 in.
(19.2 cm)
2.36 in. (6 cm)
11.4 in
(29cm)
Model 412
Note: Operator specifications are approximate. Environmental factors canchange the performance of the operator. Your installer will advise you whichmodel of operator will work best for your site and application.
30
Model 412 kit for Bi-Parting Gates
Model 412 DX KIT forSingle Leaf RIGHT HINGED GATE
Model 412 SX KIT forSingle Leaf LEFT HINGED GATE
Model 412 DX operator forSingle Leaf RIGHT HINGED GATE
Model 412 SX operator forSingle Leaf LEFT HINGED GATE
Model 412 Electromechanical Swing Gate OperatorModel Description Package Includes Shipping Voltage Part Price
Weight Number115VAC
115VAC
115VAC
115VAC
115VAC
115VAC
50 lb (22.7 kg)
36 lb (16.3 kg)
36 lb (16.3 kg)
20 lb (9.1 kg)
20 lb (9.1 kg)
412BP1-R*
412BP1S-R
412DX1-R*
412SX1-R*
104475
104476
$1,965
$2,215
1,390
1,390
679
679
To complete your gate system, or for replacement purposes, the following accessories can be ordered:
OPTION 1:1 DX & SX operator & cover w/ mountng hardware455 D Control panel w/10 x 12 in. enclosure1 radio receiver, 2 radio transmitters, 2 manual release keys,2 photobeam sets, 4 warning signsOPTION 2:Same options except 14 X 16 pre-wired enclosure
1 DX operator & cover455 D Control panel w/10 x 12 in.enclosure & mounting hardware
1 radio receiver, 2 radio transmitters2 manual release keys, 2 photobeam sets2 warning signs
1 SX operator & cover455 D Control panel w/10 x 12 in.enclosure & mounting hardware
1 radio receiver, 2 radio transmitters2 manual release keys, 2 photobeam sets2 warning signs
1 DX operator & cover
1 SX operator & cover
Model 455D control panel with10x12 enclosure
Model 412 operators require aModel 455 D control panel, whichcan operate a single leaf ormaster/slave gate system.
The 455D has the followingfunctions and features:. Operates a single leaf or abi-parting gate
. Provides opening and closing"slow down, soft stop" convenience
. Power supply: 115 VAC (+/- 10%)or 230 VAC (+6% -10%) 50-60 HZ)
. Absorbed power: 10W
. Motor max load: 800W
. Accessories max load: .5 amp
. Electric lock max load: 15 Va
. Operating temperature: -78oFto +131oF
. Protection fuses: .800 mA (accessories)5 amp (motors)
. Operating logics:A (automatic): signal to open,gate closes automatically afterselected timed pauseS (security): similar to A logic,useful in reducing tailgatingE (semi-automatic): garagedoor-like operation; signalto open, signal to closeEP (semi-automatic): similar to E logic,but second signal stops gate, thirdsignal reverses gateB (manned, pulsed): designed forguard station use, requires 3-buttonswitch (pulsed) to open, closeand stop gateC (manned, constant): similar toB logic, but 3-button switch requiresconstant pressure on each button
. Opening/closing time: 0 to120 seconds (programmable)
. Pause time: 0 to 4 minutes(programmable)
. Closing leaf delay: 0 to 4 minutes(programmable)
. Opening leaf display: 2 seconds(can be disabled)
. Torque: adjustable from 0 to 50 levels
. On board programming via push button
. Easy interconnection of actuatingand reversing devices
. Open/Hold open function
Accessory Description Shipping Voltage Part PriceWeight Number
Photobeam Directional with diagonal alignment; 2 lb (1 kg) 785163 $210required for UL-325 compliance.
Photobeam Mounting Post Foundation plate included 5 lb (2.2 kg) 401028/ 105Standard 737630*
Photobeam Mounting Post Foundation plate included 9 lb (4.1 kg) 401035/ 170Double 737630*
Photocell Set: also reguires 2 lb (1 kg) 785152 257Photocell Metal Housing or 3 lb (1.4 kg) 720089 37Photocell Plastic Housing 2 lb (1 kg) 720086 8
Receiver FAAC single channel 1 lb (.5 kg) 1RP418DS 68Transmitter FAAC single button 1 lb (.5 kg) 1TM418DS 38Transmitter FAAC two button 1 lb (.5 kg) 787317 45Antenna FAAC tuned antenna kit 2 lb (1 kg) 412003 75
Battery Backup BC Pro Single system backup 45 lb (16.8 kg) 115V 3520 1,558BC Pro Dual system backup 45 lb (16.8 kg) 115V 3522 1,768700i Single system backup 45 lb (16.8 kg) 230V 3521 1,558700i Dual system backup 45 lb (16.8 kg) 230V 3523 1,768
Control panel 455D (replacement only) 3 lb (1.4 kg) 115V 790919 630230V 790926 630
455D w/ 14 x 16 infiberglass, 26 lb (11.8kg) 115V 455D115F* 1,055hinged, lockable enclosure 230V 455D220F* 1,055
You can upgrade from the 14 X16 pre-wired enclosure to a 20 X 16 metal pre-wired enclosure for only $100.00 net more.
31
Mounting Post Footprint
FAAC Model BC Pro 1050 and Model 700i battery back-up units
Model BC Pro 1050 battery back-up
Specifications BC Pro 1050 700i
Size: 14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm)Weight: 45 lbs. (16.8 kg)Input/Output voltage: 115 VAC 230 VACInput/Output frequency: 60 Hz 50/60 HzOutput VA: 1050 700Output watts: 680 450Recharge rate to 90%: 2-4 hours
Maximum surge current: 36,000 amps 160**AC suppression joule/amp ratings
Low volt switch to battery: 94 VAC 190 VACMax amp. draw: 5 amp. 3 amp.
Shipping Weight: 45 lbs. (16.8 kg)Part Number: 3520 3521Price: $1,558 $1,538
Dual Configuration:Dual System Part Number: 3522 3523Price 1768 : $1,768$1,748
Model 412 Electromechanical Swing Gate Operator
FAAC Photobeam Systems
.Anodized aluminum
.Standard post: 22 in. high (57.5 cm)
.Double post (holds photobeamand control switch): 44 in. (111.5 cm)
NOTE: Photobeam sets require2 posts
Features:
Photobeam Photocell SetDesigned for wall mounting or for mountingin special extruded aluminum mountingposts.
.Directional photocell withdiagonal alignment
.Angle of detection: +- 4 degrees
.Range: 100 ft (30 m)
.Obstacle detection time: 10 ms
.Housing protection IP 54
.Required power supply: 24-35 VDC (available on FAACcontrol panels)
.Output relay rating: 100 MA/24VDC
.Output relay: N.O. (Normally Opened) and N.C. (NormallyClosed)
.Receiver and Transmitter provide reliable all-weather sensingDimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm)
Features:
* Measurements and weights stated in this Price List are approximate and subject to change withoutnotice. For exact specifications, please refer to the Installation Manual or contact our technical depart-ment at 1-800-221-8278.
Ideal useage for the BC Pro and 700I battery backup systems: Fail safe(gates open during power outage and remain open until power is restored).Even if the power outage is prolonged and the batteries die, the gates willremain open to allow normal ingress and egress during the power outage.
Because the BC Pro and 700I battery backup systems run off the batteries,gate operation during a power outage is dependant upon the batteries beingwell conditioned and charged. If they are not, the voltage does not runthrough to the control panel being backed up. The battery backup systemdoes not shut down at all during a power outage, instead powering all periph-erals being backed up with our battery backup system. Thus, the moreperipherals used, the faster the batteries will die. Once the batteries do die,the gates will become inoperable and will stop at the position they were atwhen the batteries failed. Therefore, it is important to understand that the BCPro or 700I battery backup systems are not intended to provide long term
Photobeam Mounting Posts(Standard and Double)Photobeam Mounting Post and FoundationPlate for Photobeam Set
401035737630*
401028737630*
3.54 in.(9 cm)
2.38 in.(5.8 cm)
2.38
in.(5.8
cm)
2.75 in.(7 cm)
4.5in.
(11.5cm
)
3.75
in.(9.5
cm)
Photobeam Set
service in a Fail secure application (gates remain closed duringpower outage). Again, long term poweroutages could result in the batteries failing at some point, possiblyleaving the gates either partially or fully open or closed.
32
FAAC Photocell Systems
Photocell Metal Housing
Model 412 Electromechanical Swing Gate Operator
Entry Sytem Devices
Photocell Plastic Housing
Photocell Plastic HousingDimensions:2.5 in. high x 2.25 in. wide x 2.75 in. deep(6.4 cm x 5.7 cm x7 cm)
Photocell Metal HousingPowder coated steel.Dimensions:2.5 in. high x 2.5 in. wide x 2.75 in. deep(6.4 cm x 6.4 cm x7 cm)
Standard Photocell Set
Standard Photocell SetDimensions: 2.75 in. wide x 2.75 in. high x 4 in. deep (7cm x 7 cm x 10.2 cm)
Depth measurement includes housing.
The Standard Photocell Set requires the following additionalequipment (priced separately):Multi-Use Metal Housing, or Multi-Use Plastic Housing
Features:Required power supply: 19 - 34 VDC or 15 - 25 VAC (avail-able on FAAC control panels).
Output relay rating: 25 VAC, 0.1A
Output relay: N.O. (Normally Opened) and N.C.(Normally Closed)
Transmitter to receiver sensing provides reliable all-weathersensing
Range: 90 ft (27 m)
33
Model 415
Model415
FAAC operators for swinging gates areamong the safest available. The anti-entrap-ment and security protection provided by allgate operators can and should be improvedwith photocells, loop detectors, sensingedges and/or other similar devices. FAACstrongly recommends that devices such asthese be installed with all automated gatesystems.
To guarantee the safety and efficiency of itsequipment, FAAC strongly recommends thatqualified personnel test the safety system onan annual basis, as well as maintain theoverall hydraulic or mechanical system.
Electromechanical Swing Gate Operator
.Designed for residential applications
. Two year limited warranty(see back cover)
35
UL 325COMPLIANTCSI # 02820 -Gate Operators
Model 415
Model 415 dimensions
The Model 415 was designed to provide power and versatilityto an economical residential swing operator.
Features. Sleek design. Sealed limit switches
NOTE: If installation does not require electronicslowdown, the internal limit switches can be used aspositive stops. If installation DOES require electronicslowdown, POSITIVE STOPS MUST BE USED INPLACE OF LIMITS.
When adjusting limit switches, use a hand-held screwdriver, NOT A POWER SCREWDRIVER, as this candamage the limit switches.. Operates even in case of power failure(with optional battery back-up and subject tobattery condition). Reverse on contact. Slow down “soft stop”
NOTE: Operator specifications are approximate. Environmental factors can change the performance of the operator.
Model 415 Electromechanical Swing Gate Operator
Specifications
Duty Cycle (cycles per hour) 25
Maximum Gate Swing 110 Degrees
90 Degree Opening Time 13 Seconds
Maximum Weight Per Gate Leaf 700 pounds (317.5 kg)
Maximum Length Per Gate Leaf 15 feet (4.6m)
Approximately Operating Temperature Range -4*F - 131*F (-20*C - 55*C)
Voltage 115VAC
Power Consuption 300W
Current Consumption 2.5 A
Effective Stroke 15 in. (38.1cm)
Protection Class Nema 4x
36
To complete your gate system, or for replacement purposes, the following accessories can be ordered:
Model
Model 415 Basic Single Kit
Shipping Wt(approx.)
46 lbs. (20.9 kg)
65 lb (29.5 kg)
Voltage
115VAC
115VAC
Part Number
1044182.5*
1044182.5L*
Price
$1419
$1795
Package Includes
Option #1Operator, 455D control panel,10x12 in. enclosure
Option #2Operator, 455D control panel,14x16 in. pre-wired enclosure
Model
415 Operator Only
Shipping Wt(approx.)
25 lbs. (11.3 kg)
Voltage
115VAC
Part Number
1044182
Price
$789
Package Includes
Use to make the single kit into amaster/slave(bi-parting) kit; or use to order replacementoperator.
* Measurements and weights stated in this Price List are approximate and subject to change without notice.For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
Model 455D control panel in14x16 in. pre-wired enclosure
Option #2
Option #1
Model 455D control panel in10x12 in. enclosure
Model 415 operators requirea Model 455 D control panel,which can operate a singleleaf or master slave gatesystem.
Model 415 Electromechanical Swing Gate Operator
Accessory Description Shipping Voltage Part PriceWeight Number
Photobeam Directional with diagonal alignment; 2 lb (1 kg) 785163 $210required for UL-325 compliance.
Photobeam Mounting Post Foundation plate included 5 lb (2.2 kg) 401028/ 105Standard 737630*
Photobeam Mounting Post Foundation plate included 9 lb (4.1 kg) 401035/ 170Double 737630*
Photocell Set: also reguires 2 lb (1 kg) 785152 257Photocell Metal Housing or 3 lb (1.4 kg) 720089 37Photocell Plastic Housing 2 lb (1 kg) 720086 8
Receiver FAAC single channel 1 lb (.5 kg) 1RP418DS 68Transmitter FAAC single button 1 lb (.5 kg) 1TM418DS 38Transmitter FAAC two button 1 lb (.5 kg) 787317 45Antenna FAAC tuned antenna kit 2 lb (1 kg) 412003 75
Loop Detector DSP 15 1 lb (.5 kg) 2664 200Loop Detector DSP II; plugs in control panel backplate 1 lb (.5 kg) 2665 120Loop Detector DSP 10; plugs in control panel backplate 1 lb (.5 kg) 2667 130
& has sensitivity adjustment
Shadow Detector kit (DPS 11) Includes one detector, base, and 1 lb (.5 kg) 115V 2665.1* 180relay for shadow loop 230V 2665.2* 180
Shadow Detector kit (SP 10) Includes one detector, base, and 1 lb (.5 kg) 115V 2667.1* 190relay for shadow loop 230V 2667.2* 190
Mag Lock Relay Kit Includes base & relay for mag lock 24V ac 2352 42
Battery Backup BC Pro Single system backup 45 lb (16.8 kg) 115V 3520 1,558BC Pro Dual system backup 45 lb (16.8 kg) 115V 3522 1,768
Control panel 455D (replacement only) 3 lb (1.4 kg) 115V 790919 630230V 790926 630
455D w/ 14 x 16 in fiberglass, 26 lb (11.8kg) 115V 455D115F* 1,055hinged, lockable enclosure 230V 455D220F* 1,055
37
FAAC Model BC Pro 1050 and Model 700i battery back-up units
Model BC Pro 1050 battery back-up
Model 415 Electromechanical Swing Gate Operator
FAAC Photobeam SystemsPhotobeam Photocell SetDesigned for wall mounting or for mountingin special extruded aluminum mountingposts.
.Directional photocell withdiagonal alignment
.Angle of detection: +- 4 degrees
.Range: 100 ft (30 m)
.Obstacle detection time: 10 ms
.Housing protection IP 54
.Required power supply: 24-35 VDC (available on FAACcontrol panels)
.Output relay rating: 100 MA/24VDC
.Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)
.Receiver and Transmitter provide reliable all-weather sensingDimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm)
Features:
* Measurements and weights stated in this Price List are approximate and subject to change withoutnotice. For exact specifications, please refer to the Installation Manual or contact our technical departmentat 1-800-221-8278.
Ideal useage for the BC Pro and 700I battery backup systems: Fail safe(gates open during power outage and remain open until power is restored).Even if the power outage is prolonged and the batteries die, the gates willremain open to allow normal ingress and egress during the power outage.
Because the BC Pro and 700I battery backup systems run off the batteries,gate operation during a power outage is dependant upon the batteries beingwell conditioned and charged. If they are not, the voltage does not runthrough to the control panel being backed up. The battery backup systemdoes not shut down at all during a power outage, instead powering all periph-erals being backed up with our battery backup system. Thus, the moreperipherals used, the faster the batteries will die. Once the batteries do die,the gates will become inoperable and will stop at the position they were atwhen the batteries failed. Therefore, it is important to understand that the BCPro or 700I battery backup systems are not intended to provide long term
Photobeam Set
service in a Fail secure application (gates remain closed during power out-age). Again, long term power outages could result in the batteries failing atsome point, possibly leaving the gates either partially or fully open or closed.
Specifications BC Pro 1050 700i
Size: 14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm)Weight: 45 lbs. (16.8 kg)Input/Output voltage: 115 VAC 230 VACInput/Output frequency: 60 Hz 50/60 HzOutput VA: 1050 700Output watts: 680 450Recharge rate to 90%: 2-4 hours
Maximum surge current: 36,000 amps 160**AC suppression joule/amp ratings
Low volt switch to battery: 94 VAC 190 VACMax amp. draw: 5 amp. 3 amp.
Shipping Weight: 45 lbs. (16.8 kg)Part Number: 3520 3521Price: $1,558 $1,558
Dual Configuration:Dual System Part Number: 3522 3523Price: $1,768 $1,768
Mounting Post Footprint
.Anodized aluminum
.Standard post: 22 in. high (57.5 cm)
.Double post (holds photobeamand control switch): 44 in. (111.5 cm)
NOTE: Photobeam sets require2 posts
Features:
Photobeam Mounting Posts(Standard and Double)Photobeam Mounting Post and FoundationPlate for Photobeam Set
401035737630*
401028737630*
3.54 in.(9 cm)
2.38 in.(5.8 cm)
2.38
in.(5.8
cm)
2.75 in.(7 cm)
4.5in.
(11.5cm
)
3.75
in.(9.5
cm)
38
39
Model 415 Electromechanical Swing Gate Operator
Model 455Dcontrol panel
Detail of controlpanel schematic
Model 455D control panelTo simplify understanding of the new detector layout, the Model 455 Dbackplate is shown here with control panel, outlet switch, test button andappropriate terminal strips. Also shown are the new "free exit" and "safe-ty" loop detector plug-in bases. These will come as diagramed with allenclosures.
The shadow loop detector can be added as an option. The shadow kit iscomprised of another base, detector, and relay. These items are shownin the diagram within the bold, broken line section with instructions below.
Visit us online at
www.faacusa.com
40
41
Model 400
Model400
FAAC operators for swinging gates are amongthe safest available. The anti-entrapment andsafety provided by all gate operators can andshould be improved with photocells, loopdetectors, sensing edges and/or other similardevices. FAAC strongly recommends thatdevices such as these be installed with allautomated gate systems.
To guarantee the safety and efficiency of itsequipment, FAAC strongly recommends thatqualified personnel test the safety system on anannual basis, as well as maintain the overallhydraulic or mechanical system.
Hydraulic Swing Gate Operator
.Designed for heavy duty applications
. Two year limited warranty(see back cover)
41
Model 400 Hydraulic Swing Gate OperatorThe Model 400 heavy duty operator is designed specificallyfor situations needing maximum versatility such as apartment,subdivision, commercial/industrial and residential applications.
Definitions:CBAC: hydraulic locking open & closed; normal swing speedCBA/CBC: hydraulic locking open/closed; normal swing speedSB: without hydraulic locking; normal swing speedSBS: without hydraulic locking; slower swing speed
. Adjustable hydraulic pressures to control force
. Minimized pinch points
. Available hydraulic locking of the gateavailable in open and/or closed position
. Quiet operation
. Self-lubricating for long life
. Maximum leaf length: 22 ft (6.7 m) - see chart below
. Maximum leaf weight: 2000 lb (907 kg) - see chart below
. Maximum cycles per hour: 80
. Two year warranty (see back cover) Model 400 manual release
Model 400
Model 400
AB
4.45 in. (11.3 cm)
3.35 in. (8.5 cm)
C
ABC
40.5 in. (103.1 cm)27.5 in. (70 cm)10.25 in. (26 cm)
* Mounting dimensions, wind factor and gate design will affect performance specifications* Duty cycle is measured in an ambient temperature of 72 degrees F (20 degrees C) and 115 or 230VAC. Variations in temperature and fluctuation of voltages will also affect duty cycle.* An electric or magnetic lock is recommended for any gate longer than 12 feet (3.7 m).
NOTE: To simplify ordering the right Model 400 that will work best for your application, you only need toanswer one basic question: What is the maximum length of the gate leaf?
All models listed can be converted to CBAC, CBC, SB or SBS upon request.Positive Gate Stops, which limit gate travel, are required in the opened and closed positions, see page 32.
50.5 in. (128.5 cm)32.4 in. (82.2 cm)15 in. (38. cm)
Standard Extended Geometry (EG)
Operator LockingInward Swing Position Outward Swing PositionOpened Closed Opened Closed
Max. Max. Time to Max. Angle Cycles ShippingVersion Leaf Length Leaf Weight Travel 90° of Opening Per Hour WeightCBACR 400 12 ft (3.6 m) 900 lb (408 Kg) 12 sec 115° 80 29 lb (13.2 kg)CBAC 400 16 ft (4.9 m) 1300 lb (589.7 Kg) 17 sec 115° 80 29 lb (13.2 kg) • • • •CBAC 400 EG 18 ft (5.5 m) 1500 lb (680.4 Kg) 18 sec 125° 80 34 lb (15.4 kg) • • • •
SB 400 18 ft (5.5 m) 1600 lb (725.8 Kg) 17 sec 115° 80 29 lb (13.2 kg)SB 400 EG 20 ft (6.1 m) 1800 lb (816.5 Kg) 18 sec 125° 80 34 lb (15.4 kg)SBS 400 20 ft (6.1 m) 2000 lb (907.2 Kg 23 sec 115° 50 29 lb (13.2 kg)SBS 400 EG 22 ft. (6.7 m) 2200 lb (998 Kg) 27 sec 125° 50 34 lb (15.4 kg)
CUSTOM PRE-WIRES AVAILABLE
Ideal for complex applications like gated communities that require many peripherals.
Double Pre-wire: 24” H x 24” W x 10” D These enclosures areTriple Pre-wire: 24” H x 36” W x 12” D metal, hinged and lockable
. Everything the system needs fits into one box, including entry/exit (Double orTriple) and even battery back up (Triple only), eliminating multiple enclosures. Troubleshooting is simplified with everything in one box
For pricing information, call FAAC at 1-800-221-8278.
NOTE: FAAC hydraulic operators are not recommended for use onsolid-faced gates which are subject to gusty and/or high wind situa-tions. Solid-faced is defined as 50% or more of the gate beingsolid. If you still have questions regarding your specific installation,please contact our technical department at 1-800-221-8278.
42
Model 400 Hydraulic Swing Gate Operator
To make the above a master/slave (bi-parting) system, use the following:
400 CBAC StandardBasic Single Kit
400 CBACR RapidBasic Single Kit
400 CBAC EG (long)Basic Single Kit
Model Description Package Includes Shipping Wt. Voltage Part No. Price115V230V
115V230V
115V230V
54 lb (24.5.kg)
54 lb (24.5.kg)
54 lb (24.5.kg)
29 lb (13.2 kg)
29 lb (13.2 kg)
34 lb (15.4 kg)
10420112.5*1042011.5*
10420712.5*1042071.5*
10420212.5*1042021.5*
$2,5252525
26502650
27252725
400 CBAC StandardOperator only
400 CBACR Rapid Operator only
400 CBAC EG Operator Only
Use to make the single kitinto a master/slave, or use toorder replacement operator.
115V230V
115V230V
115V230V
104201121042011
104207121042071
104202121042021
$1,6451,645
1745174518661866
* Measurements and weights stated in this PriceList are approximate and subject to change with-out notice. For exact specifications, please referto the Installation Manual or contact our technicaldepartment at 1-800-221-8278.
Model Description Package Includes Shipping Wt. Voltage Part No. Price
To complete your gate system, or for replacement purposes, the following accessories can be ordered:
400 CBAC operator, 455D control panel,pre-wired14x16 enclosure
400 CBACR operator, 455D control panel,pre-wired 14x16 enclosure
400 CBAC EG operator, 455D control panel,pre-wired 14x16 enclosure
Model 455D control panel
Model 400 operator requires aModel 455D control panel, whichcan operate a single leaf or masterslave gate system. The 455D hasa convenient reference diagram onthe inside cover.The 455 D has the followingfunctions and features:. Operates a single leaf or abi-parting gate
. Provides opening and closing"slow down, soft stop" convenience
. Power supply: 115 VAC (+/- 10%)or 230 VAC (+6% -10%) 50-60 HZ)
. Absorbed power: 10W
. Motor max load: 800W
. Accessories max load: .5 amp
. Electric lock max load: 15 Va
. Operating temperature: -78oFto +131oF
. Protection fuses: .800 mA (accessories)5 amp (motors)
. Operating logics:A (automatic): signal to open,gate closes automatically afterselected timed pauseS (security): similar to A logic,useful in reducing tailgatingE (semi-automatic): garagedoor-like operation; signalto open, signal to closeEP (semi-automatic): similar to E logic,but second signal stops gate, thirdsignal reverses gateB (manned, pulsed): designed forguard station use, requires 3-buttonswitch (pulsed) to open, closeand stop gateC (manned, constant): similar toB logic, but 3-button switch requiresconstant pressure on each button
. Opening/closing time: 0 to120 seconds (programmable)
. Pause time: 0 to 4 minutes(programmable)
. Closing leaf delay: 0 to 4 minutes(programmable)
. Opening leaf display: 2 seconds(can be disabled)
. Torque: adjustable from 0 to 50 levels
. On board programming via push button
. Easy interconnection of actuatingand reversing devices
. Open/Hold open function
Accessory Description Shipping Voltage Part PriceWeight Number
Photobeam Directional with diagonal alignment; 2 lb (1 kg) 785163 $210
Photobeam Mounting Foundation plate included 5 lb (2.2 kg) 401028/ 105Post: Standard 737630*
Photobeam Mounting Foundation plate included 9 lb (4.1 kg) 401035/ 170Post: Double 737630*
Photocell Set: also reguires 2 lb (1 kg) 785152 257Photocell Metal Housing or 3 lb (1.4 kg) 720089 37Photocell Plastic Housing 2 lb (1 kg) 720086 8
Receiver FAAC single channel 1 lb (.5 kg) 1RP418DS 68Transmitter FAAC single button 1 lb (.5 kg) 1TM418DS 38Transmitter FAAC two button 1 lb (.5 kg) 787317 45Antenna FAAC tuned antenna kit 2 lb (1 kg) 412003 75
Loop Detector DSP 15 1 lb (.5 kg) 2664 200Loop Detector DSP II; plugs in control panel backplate 1 lb (.5 kg) 2665 120Loop Detector DSP 10; plugs in control panel backplate 1 lb (.5 kg) 2667 130
& has sensitivity adjustment
Shadow Detector kit Includes one detector, base, and 1 lb (.5 kg) 115V 2665.1* 180
relay for shadow loop 230V 2665.2* 180
Shadow Detector kit (SP 10) Includes one detector, base, and 1 lb (.5 kg) 115V 2667.1* 190relay for shadow loop 230V 2667.2* 190
Mag Lock Relay Kit Includes base & relay for mag lock 24V ac 2352 42
Positive Stop Mdl 84, 4-rod internal stop, 400 Std. 4 lb (1.8 kg) 490109 195Mdl 84, 4-rod internal stop, 400 EG 4 lb (1.8 kg) 490043 195
Battery Backup BC Pro Single system backup 45 lb (16.8 kg) 115V 3520 1,558BC Pro Dual system backup 45 lb (16.8 kg) 115V 3522 1,768700i Single system backup 45 lb (16.8 kg) 230V 3521 1,558700i Dual system backup 45 lb (16.8 kg) 230V 3523 1,768
Control panel 455D (replacement only) 3 lb (1.4 kg) 115V 790919 630230V 790926 630
455D w/ 14 x 16 in fiberglass, 26 lb (11.8kg) 115V 455D115* 1,055hinged, lockable enclosure 230V 455D220F* 1,055455D w/20x16 metal, 115V 455D115A* 1264hinged enclosure 230V 455D230A* 1264
YYoouu ccaann uuppggrraaddee ffrroomm oouurr 1144 XX1166 pprree--wwiirreedd eenncclloossuurreettoo oouurr 2200 XX1166 mmeettaall pprree--wwiirreedd eenncclloossuurree ffoorr oonnllyy$$110000..0000 nneett mmoorree..
43
44
FAAC Model BC Pro 1050 and Model 700i battery back-up units
Positive Stops (concealed)
Model BC Pro 1050 battery back-up
Stop-O-Matic Model 84
Model 400 Hydraulic Swing Gate Operator
. Stainless steel construction
. Does not compromise the integrity of the operator
. Mounts with existing FAAC hardware and does not require additional mounting points
. Model 84 is totally hidden under the operator cover
. Accommodates inward or outward swinging gates with no additional fabrication
. Fully adjustable, opened and closed positions
. Maximum degrees of swing:115 degrees - Model 400 standard 125 degrees - Model 400 long
. Maximum leaf weight: 1,300 pounds (Standard)1500 puonds (EG)
This heavy duty, adjustable concealed stop is designed specifically for the Model 400 swing operator equipped with a front flange and mounting studs. It mounts to the operator with four bolts and is built with four oversized, threaded rods.
On older Model 400 operators now in service, the front flange can bereplaced to accept the Model 84 stop.
. Designed for Model 400 standard, rapid and long gate mounted operators with a front flange equipped with mounting studs
Features:
* Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
Ideal useage for the BC Pro and 700I battery backup systems: Fail safe(gates open during power outage and remain open until power is restored).Even if the power outage is prolonged and the batteries die, the gates willremain open to allow normal ingress and egress during the power outage.
Because the BC Pro and 700I battery backup systems run off the batteries,gate operation during a power outage is dependant upon the batteries beingwell conditioned and charged. If they are not, the voltage does not runthrough to the control panel being backed up. The battery backup systemdoes not shut down at all during a power outage, instead powering all periph-erals being backed up with our battery backup system. Thus, the moreperipherals used, the faster the batteries will die. Once the batteries do die,the gates will become inoperable and will stop at the position they were atwhen the batteries failed. Therefore, it is important to understand that the BCPro or 700I battery backup systems are not intended to provide long termservice in a Fail secure application (gates remain closed during power out-age). Again, long term power outages could result in the batteries failing atsome point, possibly leaving the gates either partially or fully open or closed.
Specifications BC Pro 1050 700i
Size: 14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm)Weight: 45 lbs. (16.8 kg)Input/Output voltage: 115 VAC 230 VACInput/Output frequency: 60 Hz 50/60 HzOutput VA: 1050 700Output watts: 680 450Recharge rate to 90%: 2-4 hours
Maximum surge current: 36,000 amps 160**AC suppression joule/amp ratings
Low volt switch to battery: 94 VAC 190 VACMax amp. draw: 5 amp. 3 amp.
Shipping Weight: 45 lbs. (16.8 kg)Part Number: 3520 3521Price: $1,558 $1,558
Dual Configuration:Dual System Part Number: 3522 3523Price: $1,768 $1,768
44
Mounting Post Footprint
FAAC Photobeam Systems
.Anodized aluminum
.Standard post: 22 in. high (57.5 cm)
.Double post (holds photobeam and control switch): 44 in. (111.5 cm)
NOTE: Photobeam sets require 2 posts
Features:
Photobeam Photocell SetDesigned for wall mounting or for mounting in special extruded aluminum mounting posts.
.Directional photocell with diagonal alignment
.Angle of detection: +- 4 degrees
.Range: 100 ft (30 m)
.Obstacle detection time: 10 ms
.Housing protection IP 54
.Required power supply: 24-35 VDC (available on FAAC con-trol panels)
.Output relay rating: 100 MA/24VDC
.Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)
.Receiver and Transmitter provide reliable all-weather sensing
.Dimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm)
Features:
* Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
Photobeam Mounting Posts (Standard and Double)Photobeam Mounting Post and FoundationPlate for Photobeam Set
401035737630*
401028737630*
3.54 in.(9 cm)
2.38 in.(5.8 cm)
2.38 in.
(5.8 cm
)
2.75 in.(7 cm)
4.5 in.
(11.5 cm
)
3.75 in.
(9.5 cm
)
Photobeam Set
45
Model 400 Hydraulic Swing Gate Operator
45
Model 400 Hydraulic Swing Gate Operator
Model 455D control panel
Detail of control panel schematic
Model 455D control panelTo simplify understanding of the new detector layout, the Model 455 D backplateis shown here with control panel, outlet switch, test button and appropriate termi-nal strips. Also shown are the new "free exit" and "safety" loop detector plug-inbases. These will come as diagramed with all enclosures.
The shadow loop detector can be added as an option. The shadow kit is com-prised of another base, detector, and relay. These items are shown in the dia-gram within the bold, broken line section with instructions below.
46
Model 402 & 422
Model 402 &422
FAAC operators for swinging gates are among thesafest available. The anti-entrapment and safetyprovided by all gate operators can and should beimproved with photocells, loop detectors, sensingedges and/or other similar devices. FAAC strongly recommends that devices such as thesebe installed with all automated gate systems.
To guarantee the safety and efficiency of its equipment, FAAC strongly recommends that qualified personnel test the safety system on anannual basis, as well as maintain the overallhydraulic or mechanical system.
Hydraulic Swing Gate Operators
.Designed for light duty gate systems
. Two year limited warranty(see back cover)
48
Model 402 & 422 Hydraulic Swing Gate OperatorsThe Models 402 and 422 are designed for light-dutygate systems and are not recommended for solid gates.
. Adjustable hydraulic pressures to control swing
. Minimized pinch points
. Hydraulic locking of the gate available in opened and or closed position
. Quiet operation
. Self-lubricating for long life
. Two year warranty (see back cover)
. FAAC’s most economical hydraulic operator
. 12 second swing to clear 90o.
. Locks in the opened or closed positions (CBA/CBC)
. Maximum leaf length: 10 ft (3 m)
. Maximum leaf weight: 900 lb (410 kg)
. Maximum cycles per hour: 30
Model 402 is FAAC’s most economi-cal gate mounted hydraulic operator. Model 402 manual release
Model 402
(Note: Positive Gate Stops, which limit gate travel, arerequired in the opened and closed positions, see page 42.)
Model 402
. 12 second swing to clear 90o
. Locking in both directions available
. Easy installation and maintenance
. Swivel attachment to front bracket
. Oil can be checked without removing operator from gate
. Maximum leaf length: 10 ft (3 m)
. Maximum leaf weight: 900 lb (410 kg)
. Maximum cycles per hour: 30
The Model 422 features hydraulic lockingin both the opened and closed positions. It has a keyed manual release.
Model 422 manual release
Model 422
Model 422
* Measurements and weights stated in this Price List are approximate and subject to change withoutnotice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
37.75
in. (9
5.9 cm
)
26.1 i
n. (66
.4 cm)
3.35 in. (8.5 cm)
2.4 in. (6.1 cm)
9.45 i
n
(24 cm
)
38.9 i
n. (98
.7 cm)
27.25
in. (6
93 cm)
3.35 in.(8.5 cm)
4.45 in. (11.3 cm)
24 in. (6.1 cm)
9.45 i
n
(24 cm
)
CUSTOM PRE-WIRES AVAILABLE
Ideal for complex applications like gated communities that require many peripherals.
Double Pre-wire: 24” H x 24” W x 10” D These enclosures areTriple Pre-wire: 24” H x 36” W x 12” D metal, hinged and lockable
. Everything the system needs fits into one box, including entry/exit (Double or Triple) and even battery back up (Triple only), eliminating multiple enclosures. Troubleshooting is simplified with everything in one box
For pricing information, call FAAC at 1-800-221-8278.
NOTE: FAAC hydraulic operators are not recommended for use on solid-faced gates which are subject to gusty and/or high wind situations. Solid-faced is defined as 50% or more of the gate being solid. If you still havequestions regarding your specific installation, please contact our technical department at 1-800-221-8278.
49
Model 402 & 422 Hydraulic Swing Gate Operators
To make the above a master/slave (bi-parting) system, use the following:
402 CBC Standard Basic Single Kit
422 CBAC Standard Basic Single Kit
Model Description Package Includes Shipping Voltage Part PriceWeight Number
115V230V
115V230V
39 lb (17.7 kg)
39 lb (17.7 kg)
22 lb (10 kg)
22 lb (10 kg)
1044682.5*1044681.5*
10420012.5*1042001.5*
$20102010
2,3202,320
402 CBC Standard Operator Only
422 CBAC Standard Operator Only
Use to make the single kit into amaster/slave, or use to orderreplacement operator.
115V230V
115V230V
10446821044681
104200121042001
$1,1591,159
1,3831,383
Model Description Package Includes Shipping Voltage Part PriceWeight Number
To complete your gate system, or for replacement purposes, the following accessories can be ordered:
402 CBC operator, 455D control panel,14x16 pre-wired enclosure
422 CBAC operator, 455D control panel,14x16 pre-wired enclosure
Model 455D control panelModel 402/422 operators require aModel 455D control panel, whichcan operate a single leaf or masterslave gate system. The 455D hasa convenient reference diagram onthe inside cover.
* Measurements and weights stated in this PriceList are approximate and subject to change with-out notice. For exact specifications, please referto the Installation Manual or contact our technicaldepartment at 1-800-221-8278.
The 455D has the following functions and features:. Operates a single leaf or a bi-parting gate
. Provides opening and closing "slow down, soft stop" convenience
. Power supply: 115 VAC (+/- 10%)or 230 VAC (+6% -10%) 50-60 HZ)
. Absorbed power: 10W
. Motor max load: 800W
. Accessories max load: .5 amp
. Electric lock max load: 15 Va
. Operating temperature: -78oF to +131oF
. Protection fuses: .800 mA (accessories) 5 amp (motors)
. Operating logics:A (automatic): signal to open, gate closes automatically after selected timed pauseS (security): similar to A logic, useful in reducing tailgatingE (semi-automatic): garage door-like operation; signal to open, signal to closeEP (semi-automatic): similar toE logic,but second signal stops gate, thirdsignal reverses gateB (manned, pulsed): designed forguard station use, requires 3-buttonswitch (pulsed) to open, close and stop gateC (manned, constant): similar to B logic, but 3-button switch requiresconstant pressure on each button
. Opening/closing time: 0 to 120 seconds (programmable)
. Pause time: 0 to 4 minutes (programmable)
. Closing leaf delay: 0 to 4 minutes (programmable)
. Opening leaf display: 2 seconds (can be disabled)
. Torque: adjustable from 0 to 50 levels
. On board programming via push button
. Easy interconnection of actuating and reversing devices
. Open/Hold open function
Accessory Description Shipping Voltage Part PriceWeight Number
Photobeam Directional with diagonal alignment; 2 lb (1 kg) 785163 $210required for UL-325 compliance.
Photobeam Mounting Foundation plate included 5 lb (2.2 kg) 401028/ 105Post: Standard 737630*
Photobeam Mounting Foundation plate included 9 lb (4.1 kg) 401035/ 170Post: Double 737630*
Photocell Set: also reguires 2 lb (1 kg) 785152 257Photocell Metal Housing or 3 lb (1.4 kg) 720089 37Photocell Plastic Housing 2 lb (1 kg) 720086 8
Receiver FAAC single channel 1 lb (.5 kg) 1RP418DS 68Transmitter FAAC single button 1 lb (.5 kg) 1TM418DS 38Transmitter FAAC two button 1 lb (.5 kg) 787317 45Antenna FAAC tuned antenna kit 2 lb (1 kg) 412003 75
Loop Detector DSP 15 1 lb (.5 kg) 2664 200Loop Detector DSP II; plugs in control panel backplate 1 lb (.5 kg) 2665 120 Loop Detector DSP 10; plugs in control panel backplate 1 lb (.5 kg) 2667 130
& has sensitivity adjustment
Shadow Detector kit Includes one detector, base, and 1 lb (.5 kg) 115V 2665.1* 180relay for shadow loop 230V 2665.2* 180
Shadow Detector kit (SP 10) Includes one detector, base, and 1 lb (.5 kg) 115V 2667.1* 190relay for shadow loop 230V 2667.2* 190
Mag Lock Relay Kit Includes base & relay for mag lock 24V ac 2352 42
Positive Stop Mdl 80-402 Concealed 4 lb (1.8 kg) 3554 166Mdl 80-422 Concealed 4 lb (1.8 kg) 3555 166
Battery Backup BC Pro Single system backup 45 lb (16.8 kg) 115V 3520 1,538BC Pro Dual system backup 45 lb (16.8 kg) 115V 3522 1,748700i Single system backup 45 lb (16.8 kg) 230V 3521 1,538700i Dual system backup 45 lb (16.8 kg) 230V 3523 1,748
Control panel 455D (replacement only) 3 lb (1.4 kg) 115V 790919 630 230V 790926 630
455D w/ 14 x 16 in fiberglass, 26 lb (11.8kg) 115V 455D115F* 1,055hinged, lockable enclosure 230V 455D220F* 1,055455D w/20x16 metal, 115V 455D115A* 1264hinged enclosure 230V 455D230A* 1264
YYoouu ccaann uuppggrraaddee ffrroomm tthhee 1144 XX1166 ttoo aa 2200 XX1166 mmeettaall pprree--wwiirreedd eenncclloossuurree ffoorr oonnllyy $$110000..0000 nneett mmoorree..
50
Model 402 & 422 Hydraulic Swing Gate Operators
FAAC Model BC Pro 1050 and Model 700i battery back-up units
Positive Stops (concealed)
Model BC Pro 1050 battery back-up
Stop-O-Matic Model 80 shown in open and closed positions.
. For FAAC models 402 and 422
. Steel construction
. All versions mount with existing FAAC hardware and require no additional attachment points
. Stop is totally concealed under operator cover
. Accommodates Inward or Outward Swing with no additional fabrication
. Maximum degrees of swing: Limited by operator
. Maximum leaf length: Limited by operator
. Maximum leaf weight: Limited by operator
NOTE: Model 80 is not recomended for use in highwind situations.
This adjustable gate stop is attached to the operator front flange bytwo socket head screws. Once the open and closed stop adjust-ments are set, the protective cover is slid over the stop andsecured with an end cap and screws.
The Model 80 can be added to an operator at any time.
Features:
* Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
Ideal useage for the BC Pro and 700I battery backup systems: Fail safe(gates open during power outage and remain open until power is restored).Even if the power outage is prolonged and the batteries die, the gates willremain open to allow normal ingress and egress during the power outage.
Because the BC Pro and 700I battery backup systems run off the batteries,gate operation during a power outage is dependant upon the batteries beingwell conditioned and charged. If they are not, the voltage does not runthrough to the control panel being backed up. The battery backup systemdoes not shut down at all during a power outage, instead powering all periph-erals being backed up with our battery backup system. Thus, the moreperipherals used, the faster the batteries will die. Once the batteries do die,the gates will become inoperable and will stop at the position they were atwhen the batteries failed. Therefore, it is important to understand that the BCPro or 700I battery backup systems are not intended to provide long termservice in a Fail secure application (gates remain closed during poweroutage). Again, long term power outages could result in the batteries failingat some point, possibly leaving the gates either partially or fully open orclosed.
Specifications BC Pro 1050 700i
Size: 14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm)Weight: 45 lbs. (16.8 kg)Input/Output voltage: 115 VAC 230 VACInput/Output frequency: 60 Hz 50/60 HzOutput VA: 1050 700Output watts: 680 450Recharge rate to 90%: 2-4 hours
Maximum surge current: 36,000 amps 160**AC suppression joule/amp ratings
Low volt switch to battery: 94 VAC 190 VACMax amp. draw: 5 amp. 3 amp.
Shipping Weight: 45 lbs. (16.8 kg)Part Number: 3520 3521Price: $1,558 $1,558
Dual Configuration:Dual System Part Number: 3522 3523Price: $1,768 $1,768
51
Model 402 & 422 Hydraulic Swing Gate Operators
Mounting Post Footprint
FAAC Photobeam Systems
.Anodized aluminum
.Standard post: 22 in. high (57.5 cm)
.Double post (holds photobeam and control switch): 44 in. (111.5 cm)
NOTE: Photobeam sets require 2 posts
Features:
* Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
Photobeam Mounting Posts (Standard and Double)Photobeam Mounting Post and FoundationPlate for Photobeam Set
401035737630*
401028737630*
3.54 in.(9 cm)
2.38 in.(5.8 cm)
2.38 in.
(5.8 cm
)
2.75 in.(7 cm)
4.5 in.
(11.5 cm
)
3.75 in.
(9.5 cm
)
Photobeam Photocell SetDesigned for wall mounting or for mounting in special extruded aluminum mounting posts.
.Directional photocell with diagonal alignment
.Angle of detection: +- 4 degrees
.Range: 100 ft (30 m)
.Obstacle detection time: 10 ms
.Housing protection IP 54
.Required power supply: 24-35 VDC (available on FAAC con-trol panels)
.Output relay rating: 100 MA/24VDC
.Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)
.Receiver and Transmitter provide reliable all-weather sensing
.Dimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm)
Features:
Photobeam Set
52
53
Model 402 & 422 Hydraulic Swing Gate Operators
Model 455D control panel
Detail of control panel schematic
Model 455D control panelTo simplify understanding of the new detector layout, the Model 455 D backplateis shown here with control panel, outlet switch, test button and appropriate termi-nal strips. Also shown are the new "free exit" and "safety" loop detector plug-inbases. These will come as diagramed with all enclosures.
The shadow loop detector can be added as an option. The shadow kit is com-prised of another base, detector, and relay. These items are shown in the dia-gram within the bold, broken line section with instructions below.
Model 750
Model 750
FAAC operators for swinging gates are amongthe safest available. The anti-entrapment andsafety provided by all gate operators can andshould be improved with photocells, loopdetectors, sensing edges and/or other similardevices. FAAC strongly recommends thatdevices such as these be installed with allautomated gate systems.
To guarantee the safety and efficiency of itsequipment, FAAC strongly recommends thatqualified personnel test the safety system onan annual basis, as well as maintain the overallhydraulic or mechanical system.
In-Ground Swing Hydraulic Gate Operators
.Designed for residential applications
. Two year limited warranty(see back cover)
55
The 455 D Control Panel. UL 325 compliant. Provides “slow down”feature on open and close, at any position for all FAAC hydraulic operators plus Model 412 High Voltage versionand Model 415 electromechanical swing gate operator.
. Fully programmable using built-in push buttons, LED screen and easy-to-follow instructions
Model 750 In-Ground Hydraulic Swing Gate OperatorsThe Model 750 provides an “invisible” installation by placing the drive unit below ground.
Model 750 operators require the 455 D control panelwhich will operate a single leaf or a master/slavegate.
. Control panels may be purchased separately.
Model 750 gate operators features:. Hydraulic operation. Adjustable hydraulic pressures to control swing. Minimized pinch points. Available hydraulic locking of the gate in position. Quiet operation. Self-lubricating for long life. Opening of up to 180 degrees. Maximum leaf length: 13 ft (4 m). Maximum leaf weight: 1500 lb (680 kg). Two year warranty (see back cover)
Model 455D control panel and pre-wired enclosure
Model 750
Note: Positive Gate Stops, which limit gate travel, are required in the opened andclosed positions.
UL325
Choice of ActuatorAbbreviations: CBAC = hydraulic locking opened and closed; normal swing speedCBA/CBC = hydraulic locking in the closed/open position; normal swing speedSB = without hydraulic locking; normal swing speed
NOTE: All models listed can be converted to CBA, CBC or SBupon request.To simplify ordering the right 750 model that willwork best for your application, you only need to answer two simplequestions:
1. What is the maximum length of your gate leaf: < 8 ft (2.4 m) (CBAC) or > 9 ft (2.7 m) (SB) up to a max. of 13 ft (4 m)
2. What degree of swing do you need: 110o or 180o
CUSTOM PRE-WIRES AVAILABLEIdeal for complex applications like gated communities that require many periph-erals.
Double Pre-wire: 24” H x 24” W x 10” D These enclosures areTriple Pre-wire: 24” H x 36” W x 12” D metal, hinged and lockable
. Everything the system needs fits into one box, including entry/exit (Double
orTriple) and even battery back up (Triple only), eliminating multiple enclo-
sures. Troubleshooting is simplified with everything in one box
. Model 750 pump can be included (Tripple only)
For pricing information, call FAAC at 1-800-221-8278.
56
Model 750 In-Ground Hydraulic Swing Gate OperatorsThe Model 750 hydraulic system consists of a control panel and four hydraulic componentgroups:
Model 455D control panel and 14x16 in. pre-wired enclosure
455 D Control panel and enclosure
ControlPanel
PumpMotor
Foundation plate on whichthe Drive Unit is placed.
4.
6 in. (15.2 cm)
15.81 in.
(40.2 cm
)
4.81 in. (12.2 cm)
7.88 in. (20 cm)
The 750 Drive Unit (with metal enclosure and top) is available in both a 110o swing or a 180o swing version.
3.
5.5 in.
(14.2 cm)
3.17 in.
(8.1 cm)
13.9 in. (35.3 cm)
9.67 in. (24.6 cm)
The 750 Pump Motor Assembly and enclosure, which is avail-able with or without hydraulic locking.
1.
2. . One or two Pump Motor Assemblies. One or two 33 ft (10 m) lengths of flex hose and one or two connector kits.. One or two Drive Units with metal enclosure and top. One or two foundation plates. 455 D Control Panel & Enclosure.
Attaches to the bottom of the gate
Slides through sidechannel as gate swings
Positive stops (included with part # 2142)
750/760 collar
Side View
Top View
The 750/760 extension arm with built-in positive stops (optional)
New!
57
Model 750 In-Ground Hydraulic Swing Gate Operators
The CBAC version is only available for gateleaf lengths of 8 feet or less. However, forcertain applications, it is possible to installthe CBAC on longer leaves. For informa-tion contact FAAC's technical department at(800) 221-8278.
NOTE: FAAC hydraulic operatorsare not recommended for use onsolid-faced gates which are sub-ject to gusty and/or high wind sit-uations. Solid-faced is defined as50% or more of the gate beingsolid. If you still have questionsregarding your specific installa-tion, please contact our technicaldepartment at 1-800-221-8278.
* Measurements and weights stated in thisPrice List are approximate and subject tochange without notice. For exact specifica-tions, please refer to the Installation Manualor contact our technical department at 1-800-221-8278.
* Wind and gate design will affect perform-ance specifications.
* The Model 750 is not recommended foruse on opaque gates. The CBAC and CBCversions are not recommended for use inhigh wind situations.
* Duty cycle is measured in an ambienttemperature of 72o F (22o C) and 115 VACor 230 VAC. Variations in temperature andfluctuations in voltages will affect duty cycle.
* An electric or magnetic lock is recom-mended for any gate longer than 12 ft. (3.7m).
* Operating temperature range: -33o to 165o
F (-36o to 74o C).
* Positive Gate Stops, which limit gate trav-el, are required in the opened and closedpositions.
Model Description Shipping Voltage Maximum Maximum Part PriceWeight Leaf Length Leaf Weight Number
750 Pump Motor Assembly 12 lb (5.4 kg) 115VAC 13 ft (4 m) 1500 lb (680 kg) 107725 $921(Includes hydraulic pump enclosure) 230VAC 13 ft (4 m) 1500 lb (680 kg) 1077251 921
750 110o Drive Unit with metal enclosure and top 26 lb (11.8 kg) 13 ft (4 m) 1500 lb (680 kg) 108757 954750 180o Drive Unit with metal enclosure and top 26 lb (11.8 kg) 13 ft (4 m) 1500 lb (680 kg) 108758 1100
455D control panel with 26 lb (11.8 kg) 115VAC 455D115F* 105514 x 16 pre-wired enclosure 26 lb (11.8 kg) 230VAC 455D220F* 1055
To complete your gate system, or for replacement purposes, the following accessories can be ordered:
Accessory Description Shipping Weight Voltage Part Number Price
Foundation Plate Each 750 Drive Unit must be on a foundation plate. 11 lb (5 kg) 737607 $55
Flex Hose Connector Kit The kit includes the required connection hardware to attach the two 2 lb (.9 kg) 390421* 68hoses which run between a pump motor assembly and drive unit.
Flexible Hydraulic Hose Length: 33 ft (10m) Outside Diameter: 5/16” (8mm). 3 lb (1.4 kg) 390422 124Length: 328 ft (100m) Outside Diameter: 5/16” (8mm). 30 lb (13.6 kg) 390439Also sold by the foot for any length greater then 33 ft. 3.15 per foot
Hydraulic Pump Enclosure (replacement) 3 lb (1.4 kg) 720309 88
750/760 Extension Arm The arm is used when the 750 or 760 drive unit cannot 9 lb (4.1 kg) 738704 100
2 piece be aligned with the pivot point of the gate leaf.
750/760 Extension Arm The arm is used when the 750 or 760 drive unit cannot 9 lb (4.1 kg) 2141 1003 piece be aligned with the pivot point of the gate leaf.
750/760 Extension Arm For alignment problems plus provides positive stops 10 lb (4.5 kg) 2142 212with positive stops 2 piece
Photobeam Directional with diagonal alignment; 2 lb (1 kg) 785163 210required for UL-325 compliance.
Photobeam Mounting Foundation plate included 5 lb (2.2 kg) 401028/ 105Post: Standard 737630*
Photobeam Mounting Foundation plate included 9 lb (4.1 kg) 401035/ 170Post: Double 737630*
Photocell Set: also reguires 2 lb (1 kg) 785152 257Photocell Metal Housing or 3 lb (1.4 kg) 720089 37Photocell Plastic Housing 2 lb (1 kg) 720086 8
Receiver FAAC single channel 1 lb (.5 kg) 1RP418DS 68Transmitter FAAC single button 1 lb (.5 kg) 1TM418DS 38Transmitter FAAC two button 1 lb (.5 kg) 787317 45Antenna FAAC tuned antenna kit 2 lb (1 kg) 412003 75
Loop Detector DSP 15 1 lb (.5 kg) 2664 200Loop Detector DSP II; plugs in control panel backplate 1 lb (.5 kg) 2665 120Loop Detector DSP 10; plugs in control panel backplate 1 lb (.5 kg) 2667 130
& has sensitivity adjustment
Shadow Detector kit Includes one detector, base, and 1 lb (.5 kg) 115V 2665.1* 180relay for shadow loop 230V 2665.2* 190
Mag Lock Relay Kit Includes base & relay for mag lock 24V ac 2352 42
Shadow Detector kit Includes one detector, base, and 1 lb (.5 kg) 115V 2667.1* 240(SP 10) relay for shadow loop 230V 2667.2* 240
Battery Backup BC Pro Single system backup 45 lb (16.8 kg) 115V 3520 1,558BC Pro Dual system backup 45 lb (16.8 kg) 115V 3522 1,768700i Single system backup 45 lb (16.8 kg) 230V 3521 1,558700i Dual system backup 45 lb (16.8 kg) 230V 3523 1,768
Control panel 455D (replacement only) 3 lb (1.4 kg) 115V 790919 630 230V 790926 630
455D w/ 14 x 16 in fiberglass, 26 lb (11.8kg) 115V 455D115F* 1055hinged, lockable enclosure 230V 455D220F* 1055
455D w/20x16 115V 455D115A* $1264metal hinged enclosure 230V 455D230A* 1264
58
Specifications BC Pro 1050 700i
Size: 14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm)Weight: 45 lbs. (16.8 kg)Input/Output voltage: 115 VAC 230 VACInput/Output frequency: 60 Hz 50/60 HzOutput VA: 1050 700Output watts: 680 450Recharge rate to 90%: 2-4 hours
Maximum surge current: 36,000 amps 160**AC suppression joule/amp ratings
Low volt switch to battery: 94 VAC 190 VACMax amp. draw: 5 amp. 3 amp.
Shipping Weight: 45 lbs. (16.8 kg)Part Number: 3520 3521Price: $1,558 $1,558
Dual Configuration:Dual System Part Number: 3522 3523Price: $1,768 $1,768
Model 750 In-Ground Hydraulic Swing Gate Operators
FAAC Model BC Pro 1050 and Model 700i battery back-up units
Model BC Pro 1050 battery back-up
* Measurements and weights stated in this Price List are approximate and subject to change withoutnotice. For exact specifications, please refer to the Installation Manual or contact our technical depart-ment at 1-800-221-8278.
Ideal useage for the BC Pro and 700I battery backup systems: Fail safe(gates open during power outage and remain open until power is restored).Even if the power outage is prolonged and the batteries die, the gates willremain open to allow normal ingress and egress during the power outage.
Because the BC Pro and 700I battery backup systems run off the batteries,gate operation during a power outage is dependant upon the batteries beingwell conditioned and charged. If they are not, the voltage does not runthrough to the control panel being backed up. The battery backup systemdoes not shut down at all during a power outage, instead powering all periph-erals being backed up with our battery backup system. Thus, the moreperipherals used, the faster the batteries will die. Once the batteries do die,the gates will become inoperable and will stop at the position they were atwhen the batteries failed. Therefore, it is important to understand that theBC Pro or 700I battery backup systems are not intended to provide long termservice in a Fail secure application (gates remain closed during poweroutage). Again, long term power outages could result in the batteries failingat some point, possibly leaving the gates either partially or fully open orclosed.
59
60
Model 750 In-Ground Hydraulic Swing Gate Operators
Mounting Post Footprint
FAAC Photobeam Systems
.Anodized aluminum
.Standard post: 22 in. high (57.5 cm)
.Double post (holds photobeam and : control switch) 44 in. (111.5 cm)NOTE: Photobeam sets require 2 posts
Features:
Photobeam Photocell SetDesigned for wall mounting or for mountingin special extruded aluminum mountingposts.
.Directional photocell with diagonal alignment
.Angle of detection: +- 4 degrees
.Range: 100 ft (30 m)
.Obstacle detection time: 10 ms
.Housing protection IP 54
.Required power supply: 24-35 VDC (available on FAACcontrol panels)
.Output relay rating: 100 MA/24VDC
.Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)
.Receiver and Transmitter provide reliable all-weather sensing Dimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5cm)
Features:
Photobeam Mounting Posts (Standard and Double)Photobeam Mounting Post and FoundationPlate for Photobeam Set
401035737630*
401028737630*
3.54 in.(9 cm)
2.38 in.(5.8 cm)
2.38 in.
(5.8 cm
)
2.75 in.(7 cm)
4.5 in.
(11.5 cm
)
3.75 in.
(9.5 cm
)
Photobeam Set
Model Description Package Includes Shipping Voltage Part PriceWeight Number
Foundation plate included
Foundation plate included
5 lb (2.2 kg)
9 lb (4.1 kg)
Photobeam Mounting PostStandard
Photobeam Mounting PostDouble
401028/ 737630*
401035/737630*
$105
170
61
Model 750 In-Ground Hydraulic Swing Gate Operators
Model 455D control panel
Detail of control panel schematic
Model 455D control panelTo simplify understanding of the new detector layout, the Model 455 D back-plate is shown here with control panel, outlet switch, test button and appro-priate terminal strips. Also shown are the new "free exit" and "safety" loopdetector plug-in bases. These will come as diagramed with all enclosures.
The shadow loop detector can be added as an option. The shadow kit is comprised of another base, detector, and relay. These items are shown in the diagram within the bold, broken line section with instructions below.
Model 760
Model 760
FAAC operators for swinging gates are among thesafest available. The anti-entrapment and safetyprovided by all gate operators can and should beimproved with photocells, loop detectors, sensingedges and/or other similar devices. FAAC strongly recommends that devices such as thesebe installed with all automated gate systems.
To guarantee the safety and efficiency of its equip-ment, FAAC strongly recommends that qualifiedpersonnel test the safety system on an annualbasis, as well as maintain the overall hydraulic ormechanical system.
In-Ground Hydraulic Swing Gate Operators
.Designed for residential applications
. Two year limited warranty(see back cover)
63
Model 760 In-Ground Hydraulic Swing Gate OperatorsThe Model 760 offers many of the benefits of the Model 750, alongwith the special feature of having the drive and power units combinedtogether in-ground.
Model 760 operators require the 455 D control panel whichwill operate a single leaf or a master/slave gate.
Model 760 gate operators features:. Hydraulic actuation. Adjustable hydraulic pressures to control swing . Minimized pinch points. Available hydraulic locking of the gate in position. Quiet operation. Self-lubricating for long life. Opening of up to 148 degrees. Maximum leaf length: 13 ft (4 m). Maximum leaf weight: 1500 lb (680.4 kg). Two year warranty (see back cover)
Advantages:. Less stress on the gate and operator. Smoother operation
However:. If gate swing is less than 90 degrees, soft stop will only operate in the opened or closed position
. Slowdown increases total closing time
Model 455D control panel and pre-wired enclosure
Model 760
UL325
10.25 in.
(26 cm)
19.3 in. (49 cm
)
6.25 in.
(15.9 cm)
8.39 in.
(21.3 cm)
Featuring �Soft Stop� slow-down.
* Measurements and weights stated in this Price List are approximate and subject to change without notice. For exact specifications, refer to the Installation Manual or contact our technical department at 1-800-221-8278.* Wind and gate design will affect performance specifications.* Duty cycle is measured in an ambient temperature of 72 degrees F (20 degrees C) and 115 VAC or 230 VAC. Variations in temperature and flucuations in voltages will affect duty cycle.* An electric or magnetic lock is recommended for any gate longer than 12 ft. (3.7 m).* Operating temperature range: -33 to 165 degrees F (-36 to 74 degrees C)* Positive stops, which limit gate travel, are required in the opened and closed positions.
64
Attaches to the bottom of the gate
Slides through sidechannel as gate swings
Positive stops (included with part # 2142)
750/760 collar
Side View
Top View
Model 760 In-Ground Hydraulic Swing Gate OperatorsThe Model 760 system consists of a control panel and 2 or 3 component groups:
The 455 D programmable control panel with LED readoutThe 455 D control panel in 14x16 in. pre-wired enclosure
1. The Drive-Pump Unit
2. The Load BearingBox with top
3. And, on CBAC models,the Keyed Manual Release is required.
The 750/760 extension arm.The 750/760 extension arm with built-in positive stops (optional)
New!
In-Ground Hydraulic Swing Gate Operators
65
Model 760 In-Ground Hydraulic Swing Gate Operators760 Models and Components
Definitions:The Soft Stop feature requires agate swing of at least 90 degreesin order to operate at both open-ing and closing. If gate swing isless than 90 degrees, the SoftStop feature operates either atopening or at closing, but not atboth. Please refer to the 760Instruction Manual.
Duty Cycle assumes 115 or 230VAC and an ambient temperatureof 72oF (22oC). OperatingTemperature Range is -33o to165oF (-36o to 74oC).
NOTE: FAAC hydraulic operators arenot recommended for use on solid-faced gates which aresubject to gusty and/or highwind situations. Solid-faced isdefined as 50% or more of thegate being solid. If you stillhave questions regarding yourspecific installation, pleasecontact our technical depart-ment at 1-800-221-8278.
To make the above a master/slave (bi-parting) system, use the following:
760 Standard Basic Single Kit
Model Description Package Includes Shipping Wt. Voltage Part No. Price115V230V
68 lb (30.8 kg)2 boxes
32 lb (14.5 kg)
22 lb (10kg)
1067702.5*1067701.5*
$3,3253,325
760 Standard Operator Only
Load bearing box
Use to make the single kit into a master/slave,or use to order replacement operator.
Required for all 760 installations
115V230V
10677021067701
490098
$2,0212,021
465
Model Description Package Includes Shipping Wt. Voltage Part No. Price
760 operator w/ 455D control panel, 14 x 16 in. pre-wired enclosure & load bearing box
Model 455D control panel
Model 760 operator requires aModel 455D control panel, whichcan operate a single leaf or masterslave gate system. The 455D hasa convenient reference diagram onthe inside cover.
* The Model 760 is not recommendedfor use on solid/opaque gates. TheCBAC version is not recommended foruse in high wind situations.* Positive Gate Stops, which limit gatetravel, are required in the opened andclosed positions.
Accessory Description Shipping Weight Voltage Part Number Price
Keyed Manual Release Required for all 760 installations Access from both 2 lb (.9 kg) 424597 $74sides of gate. Uses FAAC plastic triangular key.
Manual Release Key 1 lb (.45 kg) 713002 4
750/760 Extension Arm The arm is used when the 750 or 760 drive unit cannot 9 lb (4.1 kg) 738704 1002 piece be aligned with the pivot point of the gate leaf.
750/760 Extension Arm The arm is used when the 750 or 760 drive unit cannot 9 lb (4.1 kg) 2141 1003 piece be aligned with the pivot point of the gate leaf.
750/760 Extension Arm For alignment problems plus provides positive stops 10 lb (4.5 kg) 2142 216with positive stops 2 piece
760 Positive Stop Heavy Duty Shaft mounted stop 3 lb (1.4 kg) 2640 186
Photobeam Directional with diagonal alignment; 2 lb (1 kg) 785163 204required for UL-325 compliance.
Photobeam Mounting Foundation plate included 5 lb (2.2 kg) 401028/ 105Post: Standard 737630*
Photobeam Mounting Foundation plate included 9 lb (4.1 kg) 401035/ 170Post: Double 737630*
Photocell Set: also reguires 2 lb (1 kg) 785152 257Photocell Metal Housing or 3 lb (1.4 kg) 720089 37Photocell Plastic Housing 2 lb (1 kg) 720086 8
Receiver FAAC single channel 1 lb (.5 kg) 1RP418DS 68Transmitter FAAC single button 1 lb (.5 kg) 1TM418DS 38Transmitter FAAC two button 1 lb (.5 kg) 787317 45Antenna FAAC tuned antenna kit 2 lb (1 kg) 412003 75
Loop Detector DSP 15 1 lb (.5 kg) 2664 200Loop Detector DSP II; plugs in control panel backplate 1 lb (.5 kg) 2665 120Loop Detector DSP 10; plugs in control panel backplate & 1 lb (.5 kg) 2667 130
had sensitivity adjustment
Shadow Detector kit Includes one detector, base, and 1 lb (.5 kg) 115V 2665.1* 180relay for shadow loop 230V 2665.2* 180
Shadow Detector kit Includes one detector, base, and 1 lb (.5 kg) 115V 2667.1* 190(SP 10) relay for shadow loop 230V 2667.2* 190
Mag Lock Relay Kit Includes base & relay for mag lock 24V ac 2352 42
Battery Backup BC Pro Single system backup 45 lb (16.8 kg) 115V 3520 1,558BC Pro Dual system backup 45 lb (16.8 kg) 115V 3522 1,768700i Single system backup 45 lb (16.8 kg) 230V 3521 1,558700i Dual system backup 45 lb (16.8 kg) 230V 3523 1,768
Control panel 455D (replacement only) 3 lb (1.4 kg) 115V 790919 630 230V 790926 630
455D w/ 14 x 16 in fiberglass, 26 lb (11.8kg) 115V 455D115F* 1,055hinged, lockable enclosure 230V 455D220F* 1,055
455D w/20x16 115V 455D115A* $1264metal hinged enclosure 230V 455D230A* 1264
You can upgrade from our 14 X16 pre-wired enclosure to our20 X16 metal pre-wired enclosure for only $100.00 net more.
66
Model 760 In-Ground Hydraulic Swing Gate Operators
455 D Control Panel for use with FAAC Hydraulic Swing Gate Operators
Abbreviations:CBAC = hydraulic locking opened and closed; normal swing speedCBA/CBC = hydraulic locking in the closed/open position; normal swing speedSB = without hydraulic locking; normal swing speed
NOTE:All models listed can be converted to CBA, CBC or SB uponrequest.To simplify ordering the right 760 model that will work best for your application, you only need to answer one simple questions:
1. What is the maximum length of your gate leaf: < 8 ft (2.4 m) (CBAC) or > 9 ft (2.7 m) (SB)up to a max. of 13 ft (4 m)
The 455 D has the following functions and fea-tures:. Operates a single leaf or a bi-parting gate
. Provides opening and closing "slow down, soft stop" convenience
. Power supply: 115 VAC (+/- 10%) or 230 VAC (+6% -10%) 50-60 HZ)
. Absorbed power: 10W
. Motor max load: 800W
. Accessories max load: .5 amp
. Electric lock max load: 15 Va
. Operating temperature: -78oF to +131oF
. Protection fuses: .800 mA (accessories) 5 amp (motors)
. Operating logics:A (automatic): signal to open, gate closes automatically after selected timed pauseS (security): similar to A logic, useful in reducing tailgatingE (semi-automatic): garage door-like operation; signal to open, signal to closeEP (semi-automatic): similar to E logic, but second signal stops gate, third signal reverses gateB (manned, pulsed): designed for guard station use, requires 3-button switch (pulsed) to open, close and stop gateC (manned, constant): similar to B logic, but 3-button switch requires constant pressure on each button
. Opening/closing time: 0 to 120 seconds(programmable)
. Pause time: 0 to 4 minutes (programmable)
. Closing leaf delay: 0 to 4 minutes (programmable)
UL325
Programming LED display
Programming buttons
. Opening leaf display: 2 seconds (can be disabled)
. Torque: adjustable from 0 to 50 levels
. On board programming via push button (see circuit board photo this page)
. Panel also allows for the use of FAAC Gate Coders, for “real time” tracking of gate position
. Easy interconnection of actuating and reversing devices
. Open/Hold open function
CUSTOM PRE-WIRES AVAILABLE
Ideal for complex applications like gated communities that require many peripherals.
Double Pre-wire: 24” H x 24” W x 10” D These enclosures areTriple Pre-wire: 24” H x 36” W x 12” D metal, hinged and lockable
. Everything the system needs fits into one box, including entry/exit (Double or Triple) and even battery back up (Triple only), eliminating multiple enclosures. Troubleshooting is simplified with everything in one box
For pricing information, call FAAC at 1-800-221-8278.
In-Ground Hydraulic Swing Gate Operators
67
FAAC Model BC Pro 1050 and Model 700i battery back-up units
Model BC Pro 1050 battery back-up
Model 760 In-Ground Hydraulic Swing Gate Operators
* Measurements and weights stated in this Price List are approximate and subject to change withoutnotice. For exact specifications, please refer to the Installation Manual or contact our technical depart-ment at 1-800-221-8278.
Ideal useage for the BC Pro and 700I battery backup systems: Fail safe(gates open during power outage and remain open until power is restored).Even if the power outage is prolonged and the batteries die, the gates willremain open to allow normal ingress and egress during the power outage.
Because the BC Pro and 700I battery backup systems run off the batteries,gate operation during a power outage is dependant upon the batteries beingwell conditioned and charged. If they are not, the voltage does not runthrough to the control panel being backed up. The battery backup systemdoes not shut down at all during a power outage, instead powering all periph-erals being backed up with our battery backup system. Thus, the moreperipherals used, the faster the batteries will die. Once the batteries do die,the gates will become inoperable and will stop at the position they were atwhen the batteries failed. Therefore, it is important to understand that the BCPro or 700I battery backup systems are not intended to provide long termservice in a Fail secure application (gates remain closed during power out-age). Again, long term power outages could result in the batteries failing atsome point, possibly leaving the gates either partially or fully open or closed.
Specifications BC Pro 1050 700i
Size: 14 x 16 x 6 in. (35.6 x 40.6 x 15.2 cm)Weight: 45 lbs. (16.8 kg)Input/Output voltage: 115 VAC 230 VACInput/Output frequency: 60 Hz 50/60 HzOutput VA: 1050 700Output watts: 680 450Recharge rate to 90%: 2-4 hours
Maximum surge current: 36,000 amps 160**AC suppression joule/amp ratings
Low volt switch to battery: 94 VAC 190 VACMax amp. draw: 5 amp. 3 amp.
Shipping Weight: 45 lbs. (16.8 kg)Part Number: 3520 3521Price: $1,558 $1,558
Dual Configuration:Dual System Part Number: 3522 3523Price: $1,768 $1,768
68
Model 760 In-Ground Hydraulic Swing Gate Operators
Mounting Post Footprint
FAAC Photobeam Systems
.Anodized aluminum
.Standard post: 22 in. high (57.5 cm)
.Double post (holds photobeam and control switch): 44 in. (111.5 cm)NOTE: Photobeam sets require 2 posts
Features:
Photobeam Photocell SetDesigned for wall mounting or for mounting inspecial extruded aluminum mounting posts.
.Directional photocell with diagonal alignment
.Angle of detection: +- 4 degrees
.Range: 100 ft (30 m)
.Obstacle detection time: 10 ms
.Housing protection IP 54
.Required power supply: 24-35 VDC (available on FAAC control panels)
.Output relay rating: 100 MA/24VDC
.Output relay: N.O. (Normally Opened) and N.C. (Normally Closed)
.Receiver and Transmitter provide reliable all-weather sensing Dimensions: 2.75 in. x 3.75 in. x 1.75 in. (7 cm x 9.5 cm x 4.5 cm)
Features:
Photobeam Mounting Posts (Standard and Double)Photobeam Mounting Post and FoundationPlate for Photobeam Set
401035737630*
401028737630*
3.54 in.(9 cm)
2.38 in.(5.8 cm)
2.38 in.
(5.8 cm
)
2.75 in.(7 cm)
4.5 in.
(11.5 cm
)
3.75 in.
(9.5 cm
)
Photobeam Set
Model Description Package Includes Shipping Part PriceWeight Number
Foundation plate included
Foundation plate included
5 lb (2.2 kg)
9 lb (4.1 kg)
Photobeam Mounting PostStandard
Photobeam Mounting PostDouble
401028/ 737630*
401035/737630*
$105
170
69
Model 760 In-Ground Hydraulic Swing Gate Operators
Model 455D control panel
Detail of control panel schematic
Model 455D control panelTo simplify understanding of the new detector layout, the Model 455 D backplate is shown here with control panel, outlet switch, test button and appropriate terminal strips. Also shown are the new "free exit" and "safety"loop detector plug-in bases. These will come as diagramed with all enclo-sures.
The shadow loop detector can be added as an option. The shadow kit is comprised of another base, detector, and relay. These items are shown in the diagram within the bold, broken line section with instructions below.
70
Visit us online at
www.faacusa.com
In-Ground Hydraulic Swing Gate Operators
71
Barrier Gate Operators . . . . . . . . . . . . . . 73Model 615 . . . . . . . . . . . . . . . . . . . . . . . . 74Model 620 . . . . . . . . . . . . . . . . . . . . . . . . 77Model 640 . . . . . . . . . . . . . . . . . . . . . . . . 81
Barrier Gate Accessories . . . . . . . . . . . . 85
Contents
Barrier Operators
2006 Price List
FAAC Barrier Gate OperatorsMax lengthAluminum Beam
Cycles Per Hour
ModelApplication
Normal Traffic
High Traffic
150
ContinuousDuty
10 ft
13 ft23 ft
615
620640
72
Model 615
Model 615
Barrier Gate Operator
. Designed for light to moder-ate traffic applications
. Two year limited warranty (see back cover)
To guarantee the safety and efficiencyof its equipment, FAAC strongly recom-mends that qualified personnel test thesafety system on an annual basis, aswell as maintain the overall hydraulic ormechanical system.
73
Features Common to All 615 Models
Hydraulic Locking Positions Opened & ClosedCabinet Weight (approx..) 100 lb (45.5 kg)Motor Horsepower 1/3 hpPower Supply 115 or 230 VAC
(-10% to +6%) 60 HzAmbient Operating -33oF to 165oF Temperature Range (-36oC to 74oC)
Operating Logics
The 615 BBR control panel operates the barrier for applications where automatic close is preferred; for most parking retrofit applications; and for preventing tailgating (S modes):
A = Automatic logic: one signal opens the gate and closes it after a timed pause
EP = (semi-automatic): similar to E logic, but second signal stops gate, third signal reverses gate.
B = (manned, pulsed): designed for guard station use, requires 3-button switch (pulsed) to open, close and stop gate
C = (manned, constant): similar to B logic, but 3-button switch requires constant pressure on each button
Model 615 BBR Control Panel
The Model 615 barriers are designed for light tomoderate duty applications. Additional features include:. Price includes wood beam (see page 108). Adjustable hydraulic pressures to control swing. External key-operated manual release. Simple interface with revenue control systems. Powder coated steel cabinet. Versatile Model 615 BBR control panel . Quiet operation
All 615 Models require the following:
. Assembly of the beam
. Assembly of the beam’s counterbalancing system (assembly determines right- or left-hand orientation)
FAAC Model 615 barrier gate operator
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
40 in. (101.6 cm)
10.6 in.
(27 cm)
5.5 in. (14 cm)
Hydraulic Swing Gate OperatorsModel 615
74
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
Please Note: When ordering, you need to specify the length andtype of beam you plan to install so that we can shipthe correct counterbalancing spring. Information onModel 615 wooden and aluminum beams can befound on page 88 of this Section.
An optional (recommended) foundation plate is avail-able (see page 86).
Note: When ordering, please specify desired beam length
FYI
Beams, because of their size, must be shipped bytruck. Freight charges for shipping can be asmuch or more than the cost of the beam. Pleaserequest a freight quote from FAAC to determinetotal costs.
Max BeamLength -Wooden
up to 10 ft (3 m)
Max Beam Length -Aluminum
up to 13 ft (4 m)
Speed toClear 90o
5 sec
CyclesPer Hour
150
Pump Size(liters)
1.5
Motor RPM
1400
Actual PumpOutput (liters)
1.5
Shipping Weight
100 lb (45.5 kg)
Control Panel
615 BPR
Model Voltage Part Number Price
615 BPR615 BPR
115V220V
20228125790281
$587$587
Model
615 Standard
Voltage
115 VAC230 VAC
Part Number
10490621049062
Price
$1749$1749
Hydraulic Swing Gate OperatorsModel 615
75
Replacement Boards:
Model 620
Model 620
Barrier Gate Operators
. Designed for moderate to heavy traffic applications
. Two year limited warranty (see back cover)
To guarantee the safety and efficiencyof its equipment, FAAC strongly recom-mends that qualified personnel test thesafety system on an annual basis, aswell as maintain the overall hydraulic ormechanical system.
77
Barrier Gate Operators
Model 624 BLD Control Panel Operating Logics
E = Garage door-like logic: signal to open, signal to closeAs = Automatic logic: one signal opens the gate and closes it after a timed pause
. “A” logic can be set to function as an anti-tailgating logic
. With “pre-flashing” selected by the dip switches, the control panel acts typically like other FAAC panels
. Without “pre-flashing” selected, the control panel functions more like the “S” logic on other FAAC panels
P = For parking applications requiring separate open and close controls; useful in retrofitting parking barrier gate applications
R = Master/Slave
Left-hand installation, top view
Right-hand installation, top view
You must know the orientation of your barrier when ordering a Model 620.
The U.L. Listed Model 620 barrier gates are designedfor moderate to heavy duty applications.
The 620 is shipped with the Model 624 MPS controlpanel and has the following features:
. Continuous duty operation
. Adjustable hydraulic pressures
. 4 different operating logics
. Pre-assembled counterbalanced system
. Automated fan cooling on all models
. Pause time selections
. Selectable warning light logic
. Quiet operation
. Fast opening time (2 sec. for 8.5 ft. beam)
Note: An optional (recommended) foundation plate, emer-gency bypass solenoid, barrier beams, and other acces-sories are sold separately (see pages 88-93). For informa-tion on articulated or skirted beam kits, see page 93.
FAAC Model 620 barrier gate operator
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
42.5 in. (108 cm)
13.75 in. (35
cm)6.69 in. (17 cm)
37.75 in.(101.6 cm)center ofbeam to grade
UL325
Please Note: When ordering, you need to specify the length andtype of beam you plan to install so that we can shipthe correct counterbalancing spring. Information onModel 620 wooden and aluminum beams can befound on page 88 of this Section.
An optional (recommended) foundation plate is available (see page 86).
The slave and relay card functions are now built in to the 624 BLD panel, alleviating theneed for the cards altogether.Plug in detectors available; DP2, (p/n 785599) with 2-channel capability, meaning only onedetector is needed to handle both free exit and safety
Model 620
78
Model 620 Barrier Gate OperatorsModel 620 Express
. 100% duty cycle
. includes Model 624 BLD control panel
. automatic cooling fan
. beam must be ordered separately (see page 88)
. articulated beam kit available (see page 91)
Model 620 115 VoltWhile all configurations do not currently have part numbers assigned yet, all can beconverted from existing part numbers. Simply order the part number shown, if beamsize and left/right configuration are correct. Otherwise, order the 620 or 640 with desired beam length and designate left or right, and we will convert to a specific orientation.
N/A* part number has not been provided. Call FAAC for details. Left/right configuration can be changed White barrier springs can be changed toaccommodate the 10 ft. model
PartPart
Voltage Number Price Number Price
230VAC 10463282 $3,487 10463283 $3,487230VAC 10465282 $3,487 10465283 $3,487
230VAC 10463382 $3,487 10463383 $3,487230VAC 10465382 $3,487 10465383 $3,487
230VAC 10463482 $3,487 10463483 $3,487230VAC 10465482 $3,487 10465483 $3,487
230VAC 10463582 $3,487 10463583 $3,487230VAC 10465582 $3,487 10465583 $3,487
Orange cabinet White cabinet
Beam Length Beam LengthOrientation - Wood Aluminum
Left Hand 6.5-10 ft (2-3 m) 6.5 ft (2 m)Right Hand 6.5-10 ft (2-3 m) 6.5 ft (2 m)
Left Hand 11-14 ft (3.4-3.7 m) 8.5 ft (2.6 m)Right Hand 11-14 ft (3.4-3.7 m) 8.5 ft (2.6 m)
Left Hand NA 9.75 ft (3 m)Right Hand NA 9.75 ft (3 m)
Left Hand NA 13 ft (3.9 m)Right Hand NA 13 ft (3.9 m)
Part PartVoltage Number Price Number Price
115VAC 104634821 $3,487 N/A* $3,487115VAC 104654821 $3,487 N/A* $3,487
115VAC 104635821 $3,487 N/A* $3,487115VAC 104655821 $3,487 104654831 $3,487
Orange cabinet White cabinet
Beam Length Beam LengthOrientation - Wood - Aluminum
Left Hand N/A* 9.75 ft (3 m))Right Hand N/A* 9.75 ft (3 m)
Left Hand N/A* 13 ft (3.9 m)Right Hand N/A* 13 ft (3.9 m)
FYIBeams, because of their size, must beshipped by truck. Freight charges for ship-ping can be as much or more than the cost ofthe beam. Please request a freight quotefrom FAAC to determine total costs.
Speed to Maximum Pump Size Motor Actual Pump ShippingClear 90
oDuty Cycle (liters) RPM Output (liters) Weight
2.0 sec 100% 1.0 2800 2.0 170 lb (77.1 kg)2.0 sec 100% 1.0 2800 2.0 170 lb (77.1 kg)
Speed to Maximum Pump Size Motor Actual Pump ShippingClear 90
oDuty Cycle (liters) RPM Output (liters) Weight
2.0 sec 100% 1.0 2800 2.0 170 lb (77.1 kg)2.0 sec 100% 1.0 2800 2.0 170 lb (77.1 kg)
Control Panel (replacement)Description Part No. Price
624 MPS 230 VAC 8uf 202214401 $ 706624 BLD 230 VAC 63000395 $ 706
Control Panel (replacement)Description Part Price
Number624 MPS 115 VAC 20221465 $ 706624 BLD 115 VAC 2022712 $ 706
Description PIN PriceDP2 2Channel 785599 $385
Plug-In Loop Detector
79
Visit us online at
www.faacusa.com
80
Model 640
Model 640
Barrier Gate Operators
. Designed for high traffic applications
. Two year limited warranty (see back cover)
To guarantee the safety and efficiencyof its equipment, FAAC strongly recom-mends that qualified personnel test thesafety system on an annual basis, aswell as maintain the overall hydraulic ormechanical system.
81
Model 640 Barrier Gate Operators
Model 624 BLD Control Panel Operating Logics
E = Garage door-like logic: signal to open, signal to closeAs = Automatic logic: one signal opens the gate and closes it after a timed pause
. “A” logic can be set to function as an anti-tailgating logic
. With “pre-flashing” selected by the dip switches, the control panel acts typically like other FAAC panels
. Without “pre-flashing” selected, the control panel functions more like the “S” logic on other FAAC panels
P = For parking applications requiring separate open and close controls; useful in retrofitting parking barrier gate applications
R = Master slave
The U.L. Listed Model 640 barrier gates are designedfor high traffic situations where longer beams areneeded.
The 640 is shipped with the Model 624 BLD controlpanel and has the following features:
. Continuous duty operation
. Adjustable hydraulic pressures to control swing
. 4 different operating logics
. Pre-assembled counterbalanced system
. Automated fan cooling on all models
. Pause time selections
. Selectable warning light logic
. Quiet operation
Note: An optional (recommended) foundation plate, emer-gency bypass solenoid, barrier beams, and other accessories are soldseparately (see pages 88-93). For information on articulated or skirtedbeam kits, see page 93.
FAAC Model 640 barrier gate operator
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
42.5 in. (108 cm)
15 in. (38
cm)6.69 in. (17 cm)
37.75 in.(101.6 cm)center ofbeam to grade
UL325
Please Note:
When ordering, you need to specify the length and type ofbeam you plan to install so that we can ship the correct counterbalancing spring. Information on Model 640 woodenand aluminum beams can be found on page 85 of thisSection.
An optional (recommended) foundation plate is vailable (seepage 106).
Left-hand installation, top view
Right-hand installation, top view
You must know the orientation of your barri-er when ordering a Model 640.
The slave and relay card functions are now built in to the 624 BLD panel, alleviating theneed for the cards altogether.Plug in detectors available; DP2, (p/n 785599) with 2-channel capability, meaning onlyone detector is needed to handle both free exit and safety
82
Orange cabinet White cabinet ActualBeam Beam Pump Max.
Part Part Length Spring Length Speed to Size Motor Output Duty WeightOrientation Voltage Number Price Number Price - Wood Number - Aluminum Clear 90o (liters) RPM (liters) Cycle Shipping
Left Hand 115VAC 104683821 $3,836 104663831 $3,836 16 - 18 ft 13 ft (3.9 m) 5.5sec 1.5 1400 1.5 1.5 200 lb (90.7 kg)(4.8 - 5.4 m) 7210735
Right Hand 115VAC N/A* $3,836 104663831 $3,836 16 - 18 ft 13 ft (3.9 m) 5.5sec 1.5 1400 1.5 1.5 200 lb (90.7 kg)(4.8 - 5.4 m)
Left Hand 115VAC N/A* $3,836 104663831 $3,836 18 - 20 ft 16 1/2 ft (5 m) 5.5 sec 1.5 1400 1.5 1.5 200 lb (90.7 kg)(4.8 - 6 m) 7210745
Right Hand 115VAC N/A* $3,836 104663831 $3,836 18 - 20 ft 16 1/2 ft (5 m) 5.5 sec 1.5 1400 1.5 1.5 200 lb (90.7 kg)(4.8 - 6 m)
Left Hand 115VAC N/A* $3,836 104663831 $3,836 N/A 7210755 20 ft (6 m) 8 sec 1.0 1400 1.0 1.0 200 lb (90.7 kg)Right Hand 115VAC 104662821** $3,836 104663831 $3,836 N/A 20 ft (6 m) 8 sec 1.0 1400 1.0 1.0 200 lb (90.7 kg)
Left Hand 115VAC 104685821 $3,836 104663831 $3,836 N/A 7210825 23 ft (7 m) 8 sec 1.0 1400 1400 1.0 200 lb (90.7 kg)Right Hand 115VAC 104663821** $3,836 104663831 $3,836 N/A 23 ft (7 m) 8 sec 1.0 1400 1400 1.0 200 lb (90.7 kg)
FYIBeams, because of their size, must beshipped by truck. Freight charges for ship-ping can be as much or more than the cost ofthe beam. Please request a freight quotefrom FAAC to determine total costs.
Model 640 CD. 100% duty cycle. includes Model 624 BLD control panel. automatic cooling fan. beam must be ordered separately (see page 88). skirt beam kit available (see page 91)
Model 640 115 VoltWhile all configurations do not currently have part numbers assigned yet, all can be converted from existing part numbers.Simply order the part number shown, if beam size and left/right configuration are correct. Otherwise, order the 620 or 640with desired beam length and designate left or right, and we will convert to a specific orientation.
* Measurements and weights stated in this Price List are approximate. For exact specifications, pleaserefer to the Installation Manual or contact our technical department at 1-800-221-8278.
UL325
N/A* part number has not been provided. Call FAAC for details. Springs can be modified toaccommodate all models (white & orange). Configurations can be modified on all models.
Part PartVoltage Number Price Number Price
230VAC 10468282 $3,836 10468283 $3,836230VAC 10466082 $3,836 10466083 $3,836
230VAC 10468382 $3,836 10468383 $3,836230VAC 10466182 $3,836 10466183 $3,836
230VAC 10468482 $3,836 10468483 $3,836230VAC 10466282 $3,836 10466283 $3,836
230VAC 10468582 $3,836 10468583 $3,836230VAC 10466382 $3,836 10466383 $3,836
Orange cabinet White cabinet ActualBeam Beam Pump Pump Max.Length Spring Length Speed to Size Motor Output Duty Weight
Orientation- Wood Number Aluminum Clear 90o (liters) RPM (liters) Cycle Shipping
Left Hand 16 ft (4.9 m) 7210735 13 ft (3.9 m) 4.0 sec 1.0 2800 2.0 100% 200 lb (90.7 kg.)Right Hand 16 ft (4.9 m) 13 ft (3.9 m) 4.0 sec 1.0 2800 2.0 100% 200 lb (90.7 kg.)
Left Hand 18 ft (5.5 m) 7210745 16.5 ft (5 m) 5.5 sec 1.5 1400 1.5 100% 200 lb (90.7 kg.)Right Hand 18 ft (5.5 m) 16.5 ft (5 m) 5.5 sec 1.5 1400 1.5 100% 200 lb (90.7 kg.)
Left Hand 20 ft (5.5 m) 7210755 20 ft (6 m) 8 sec 1.0 1400 1.0 100% 200 lb (90.7 kg.)Right Hand 20 ft (5.5 m) 20 ft (6 m) 8 sec 1.0 1400 1.0 100% 200 lb (90.7 kg.)
Left Hand NA 7210825 23 ft (7 m) 8 sec 1.0 1400 1.0 100% 200 lb (90.7 kg.)Right Hand NA 23 ft (7 m) 8 sec 1.0 1400 1.0 100% 200 lb (90.7 kg.)
Model 640 Barrier Gate Operators
Control Panel (replacement)
Description Part No. Price624 MPS 115 VAC
624 MPS 115V 20221465 $ 706624 BLD 115 VAC 2022712 $ 706
Description PIN PriceDP2 2Channel 785599 $385
Plug-In Loop Detector
Control Panel (replacement)Description Part No. Price
624 MPS 230 VAC 8uf 202214401 $ 706624 BLD 230 VAC 63000395 $ 706
83
94
Visit us online at
www.faacusa.com
Contents
Barrier AccessoriesBarrier Gate Operators
NOTE:The following accessories are specificto barrier operators only.
Other accessories that work with alltypes of FAAC operators, such as safety devices, access control systems,etc., are listed in the GeneralAccessories Section, page 105.
To guarantee the safety and efficiency of its equipment, FAAC strongly recommends that qualified personnel test the safety system on an annual basis, as well as maintain the overall hydraulic or mechanical system.
85
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
FYIBeams, because of their size, must beshipped by truck. Freight charges for ship-ping can be as much or more than the cost ofthe beam. Please request a freight quotefrom FAAC to determine total costs.
1. 620 Foundation PlateThe plate measures 14 in. x 7.86 in., has 4 holes foranchoring bolts, and has a hole for electrical conduits.
2. 615 Foundation PlateThe plate measures 12 in. x 12 in., has 4 holes for anchoring bolts, and has a hole for electrical conduits.
3. 640 Foundation PlateThe plate measures 15.25 in. x 9 in., has 4 holes foranchoring bolts, and has a hole for electrical conduits.
SHIPPING WEIGHT 14 lb (6.4 kg)PART NUMBER 490059PRICE: $253
SHIPPING WEIGHT 9 lb (4.1 kg)PART NUMBER 2556PRICE: $62
SHIPPING WEIGHT 10 lb (4.5 kg)PART NUMBER 490058PRICE: $213
4. 620/640 Emergency Bypass SolenoidThe solenoid automatically disengages the hydraulic locking system of the barrier when the main power is not available, allowing the beam to be raised by hand.This option requires a 230VAC power supply.
5. Anti-Vandalism Valve Protects the integrity of the hydraulic system in the event the beam is forced
SHIPPING WEIGHT 3 lb (1.4 kg)PART NUMBER 401066PRICE: $375
SHIPPING WEIGHT 3 lb (1.4 kg)PART NUMBER 401051PRICE: $798
Barrier Gate AccessoriesAccessories
86
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
FYIBeams, because of their size, must beshipped by truck. Freight charges forshipping can be as much or more than thecost of the beam. Please request a freightquote from FAAC to determine total costs.
6. 624 Slave Card The optional slave card enables two opposing barriers to operate simultaneously.
NOTE: Replacements for barriers with an MPS board
7. 624 FSW CardThe optional FSW card enables safety devices to work when a 620/640 barrier is operating in the P (parking) mode.NOTE: Replacements for barriers with an MPS board.
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 790847PRICE: $115
SHIPPING WEIGHT 1 lb (.5kg)PART NUMBER 790846PRICE: $115
8. 624 Relay CardThe optional relay card provides 6 normally open electrical contacts for connecting auxiliary equipment(computer controls, revenue equipment, alarms, etc.) or monitoring the barrier’s status.
NOTE: Replacements for barriers with an MPS board
9. Hinged Breakaway System (with sensor kit)For use with round beams on the Model 620 barrier.Includes: 1 sensor and 1 beam bracket for hinged
break-away beam
SHIPPING WEIGHTPART NUMBER 428163*PRICE: $781
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 360013PRICE: $291
Barrier Gate AccessoriesAccessories
87
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
FYIBeams, because of their size, must be shipped bytruck. Freight charges for shipping can be asmuch or more than the cost of the beam. Pleaserequest a freight quote from FAAC to determinetotal costs.
FYIAluminum beams ordered with a barrier will beshipped with appropriate fixing bracket; woodbeams ordered with a barrier will be shipped withsandwich plate. Beams ordered separately will beassumed to be replacement beams only & will notincluded fixing or sandwich hardware unlessrequested.
10. 615 Aluminum Beam KitThese aluminum beams come with a fixing bracketand are optional for new applications. All aluminumbeams measure 1 in. x 4 in. x length of beamordered. (Length of the 615 beams must be 6 ft. thru13 ft. only.)
6 Foot (1.8 m) Length
8 Foot (2.4 m) Length
10 Foot (3 m) Length
13 Foot (4 m) Length
SHIPPING WEIGHT 19.5 lbsPART NUMBER 428090PRICE: $435
SHIPPING WEIGHT 15 lbsPART NUMBER 428089PRICE: $380
SHIPPING WEIGHT 12 lbsPART NUMBER 428088PRICE: $340
SHIPPING WEIGHT 10lbsPART NUMBER 428087PRICE: $266
11. 615 Wooden Beam KitsThese beam kit numbers are to be used when order-ing with a 615 barrier and include the sandwich plate.If ordered separately the cost of the sandwich platewill be added to the price.
8 Foot (2.4 m) Length
10 Foot (3 m) Length
SHIPPING WEIGHT 8lbsPART NUMBER 2038PRICE: $159
SHIPPING WEIGHT 7lbsPART NUMBER 2146PRICE: $151
Barrier Gate AccessoriesAccessories
88
PART NUMBER 428343 615 Aluminum Fixing BracketPRICE: $78 Feb 09 and earlier
PART NUMBER 428342 615/620 Aluminum Fixing BracketPRICE: $102 Feb 09 and newer
PART NUMBER 2537 615 Wood Fixing BracketPRICE: $159 Feb 09 and earlier
PART NUMBER 2534 615/620 Wood Fixing BracketPRICE: $273 Feb 09 and newer
REPLACING OLDER BEAMSWhen replacing beams on 620 barriers older thana 10/05 serial #, the fixing bracket will have to bereplaced (part#:428342) and an adapter will beneeded (part#:390265)
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
FYIBeams, because of their size, must be shipped bytruck. Freight charges for shipping can be asmuch or more than the cost of the beam. Pleaserequest a freight quote from FAAC to determinetotal costs.
FYIAluminum beams ordered with a barrier will beshipped with appropriate fixing bracket; woodbeams ordered with a barrier will be shipped withsandwich plate. Beams ordered separately will beassumed to be replacement beams only & will notincluded fixing or sandwich hardware unlessrequested.
12. 620 Aluminum BeamsAll 620 rectangular aluminum beams measure 1 in. x 4 in. x the length of the beam ordered. For skirted or articulated beams order the length beamneeded and the skirt kit or articulated beam kit. (See page 93 of this section)
6 Foot (1.8 m) Length Rectangular Round
8 Foot (2.4 m) Length Rectangular Round
10 Foot (3 m) Length Rectangular Round
13 Foot (4 m) Length Rectangular Round
SHIPPING WEIGHT 19.5 lbs 19.5 lbsPART NUMBER 428090 428079PRICE $435 $ 435
SHIPPING WEIGHT 15 lbs 15 lbsPART NUMBER 428089 428075PRICE $380 $380
SHIPPING WEIGHT 12 lbs 12 lbsPART NUMBER 428088 428078PRICE $340 $340
SHIPPING WEIGHT 10 lbsPART NUMBER 428087 NAPRICE $266
13. 620 Wooden Beam All 620 wood beams are made of clear redwood andmeasure 1 in. x 4 in. x the length of the beamordered.
8 Foot (2.4 m) Length
10 Foot (3 m) Length
12 Foot (3.7 m) Length
SHIPPING WEIGHT 9 lbsPART NUMBER 2039++PRICE: $179
SHIPPING WEIGHT 8 lbsPART NUMBER 2038++PRICE: $159
SHIPPING WEIGHT 7 lbsPART NUMBER 2146++PRICE $151
Barrier Gate AccessoriesAccessories
89
PART NUMBER 390265 AdapterPRICE: $26
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
FYIBeams, because of their size, must be shipped bytruck. Freight charges for shipping can be asmuch or more than the cost of the beam. Pleaserequest a freight quote from FAAC to determinetotal costs.
FYIAluminum beams ordered with a barrier will beshipped with appropriate fixing bracket; woodbeams ordered with a barrier will be shipped withsandwich plate. Beams ordered separately will beassumed to be replacement beams only & will notincluded fixing or sandwich hardware unlessrequested.
14. 640 Aluminum BeamAll 640 rectangular aluminum beams measure 2 in. x 4 in. x length of beam order. For the skirtedbeams order the aluminum beam and the skirted beam kit. (See page 93 of this section)
13' (4m) Length Rectangular Round
16' (4.9m) Length Rectangular Round
20' (3m) Length Rectangular Round
23' (7m) Length Rectangular Round
SHIPPING WEIGHT 36 lbsPART NUMBER 428064+ NAPRICE $706
SHIPPING WEIGHT 30 lbsPART NUMBER 428063+ NAPRICE $602
SHIPPING WEIGHT 28 lbsPART NUMBER 428062+ NAPRICE $510
SHIPPING WEIGHT 22 lbsPART NUMBER 428061+ NAPRICE $458
15. 640 Wood Beam All 640 wooden beams are made of clear redwood anmeasured 2 in. x 6 in. x length of beam ordered.
16' (4.9m) Length
18' (2.5m) Length
20' (3m) Length
SHIPPING WEIGHT 32 lbsPART NUMBER 2043PRICE $367
SHIPPING WEIGHT 26 lbsPART NUMBER 2418PRICE $353
SHIPPING WEIGHT 22 lbsPART NUMBER 2410PRICE $342
Barrier Gate AccessoriesAccessories
90
PART NUMBER 428154 640 Aluminum Fixing BracketPRICE: $212
PART NUMBER 428071 Sandwich Platet 640 wood beamPRICE: $481
Articulated Beam
Skirted Beam(comes assembled,
ready to attach to beam)
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
16. Articulated Beam KitsArticulated beams are used in parking garages orother applications with low overhead clearances. Inaddition to ordering a rectangular aluminum beam foryour Model 620 barrier, you need to order this kit.The kit will handle a maximum 9 ft ceiling height.FAAC will articulate the beam for you. Supply us, inwriting, the distance between the base of the barriercabinet and the ceiling. You can print this form andsend us the infomation required.
17. Skirted Beam KitsA skirted beam keeps vehicles from passing under abarrier beam and consists of a rectangular aluminumbeam (ordered separately) and one or more kits forskirting the beam. Each kit is a series of interlocking,jointed metal pieces forming a framework you attachto the bottom of the beam. When the beam raises,gravity causes the skirting to collapse against the ver-tical beam.If you are retrofitting the skirt to an existing beam,call us about whether you need a different compres-sion spring for your operator.Order a combination of kits whose combined length is 1 foot shorter than the length of your rectangular aluminum beam:. One kit contains mounting hardware and the metalskirt that is about 6 feet (more precisely, 2 meters)long. The kit will work with Models 620 and 640 barri-ers.. The other kit contains mounting hardware and themetal skirt that is about 10 feet (more precisely, 3meters) long. The kit will work with Models 620 and640 barriers.
6 Foot (2 m) Skirt Kit
10 Foot (3 m) Skirt Kit
SHIPPING WEIGHT 10 lb (4.5 kg)PART NUMBER 4282441PRICE: $637
SHIPPING WEIGHT 5 lb (2.3 kg)PART NUMBER 4282431PRICE: $445
SHIPPING WEIGHT 15 lb (6.8 kg)PART NUMBER 428137PRICE: $725
Barrier Gate AccessoriesAccessories
91
92
Visit us online at
www.faacusa.com
FAAC Swing and Slide Gate OperatorsSwing Model
Cycles Per Hour
SlideModel
Application
Single family,Low Traffic
Single family,ModerateTraffic
High Traffic
30
30
ContinuousDuty
412/402/422750/760
402/422750/760
400
746
844
Slide Gate Operators . . . . . . . . . . . . . . . . 95Model 746 . . . . . . . . . . . . . . . . . . . . . . . . 96Model 844 . . . . . . . . . . . . . . . . . . . . . . . . 97
Contents
Slide Operators
2006 Price List
93
94
Example of a Complete Slide Gate System
12
3
4
5
5
6
77
8
Accessory interface boxes, pages 127-128
Photobeams, pages 18-19Other reversing devices, pages 116-120
Warning lights with varied logics, page 123
Loop detectors and loops, pages 116-120
Entry systems and devices, pages 106-116
Radio systems, pages 115-116
The slide gate operator automates the gate and is available with chain or rack and pinion drive:
.Chain offers easy installation
.Rack and pinion offers elegant, low maintenance and improved security
The U.L. Listed weather resistant accessory interface box houses the control panel for the operator and its accessories
Photobeam sets help prevent entrapment between the sliding gate leaf and another object by using the safety logic of the control panel.
The warning light alerts anyone near the gate of its movement and can light the gateway.
The mounting pedestal provides a platform for mounting the operator.
Vehicle sensors (inductive loops) activate the operator to prevent the gate from closing on a vehicle. Talk to our sales staff about whether your installation requires a safety, free exit, and/or closing (security) loop.
Activating switches allow the opening or closing of the gate. The switch may be activated by the following:
.Key
.Card
.Keyboard code
The antenna for the radio receiver and transmitter allowsremote control of the gate.
1
2
3
4
5
6
7
8
No. Description More Information
95
Slide
Models 746 and 844
Slide Gate Operators
. Designed for residential andlight commercial applications
. Two year limited warranty (see back cover)
FAAC operators for sliding gates are among the safest available. The anti-entrapment and security protectionprovided by all gate operators can andshould be improved with photocells, loop detectors, sensing edges and/orother similar devices. FAAC strongly recommends that devices such asthese be installed with all automatedgate systems.
To guarantee the safety and efficiency of its equipment, FAAC strongly recommends that qualified personnel test the safety system on an annual basis, as well as maintain the overallhydraulic or mechanical system.
No. Description More Information
96
* Maximum Gate Length is limited by the Pulling Force requirement and the 746’s maximum motor run time of two minutes.* Note: Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.* The anti-entrapment protection and security protection provided by the 746 can and should be improved with photocells, loop detectors, sensing edges and/or other similar devices. FAAC strongly recommends that devices such as these be installed with all automated gate systems.
Model 746 Slide Gate OperatorsFeatures include:• 230 VAC• External limits• Manual release • “Soft Stop” on opening and closing• 1/2 hp motor• Pulling force: 35 lb (16 kg)• Speed: 50 ft/min (12 m/min)• Duty cycle: 50% motor run time• Microprocessor control: choose from 6 operating logics:
A (automatic): signal to open; signal to closeS (security): similar to A logic, useful in reducing tailgatingE (semi-automatic): garage door-like operation; signal to open, signal to closeEP (semi-automatic) similar to E logic but second signal stops gate, third signal reverses gateB (manned, pulsed): designed for guard station use, requires 3-button switch (pulsed) to open, close and stop gateC (manned, constant): similar to B logic but 3-button switch requires constant pressure on each button
• Plus- push-button programmable - reverse on contact (programmable on and off) - built-in cycle counter
Model Package Includes Weight Voltage Number Price
746 – Chain One operator, 780D control panel,16 or 20 tooth sprocket, 50 lb (22.7 kg) 230 VAC 109775 $1,484protective cover, limit switch plates, mounting angle brackets, chain-to-gate mounting hardware with nickelplated master links, warning signsNote: Chain is not included (see charts below)
746 – Rack & Pinion One operator, 780Dcontrol panel, 20 tooth pinion, 44 lb (20 kg) 230 VAC 109773 $1,484mounting angle brackets and limit switch platesNote: Rack is not included (see charts below)
Accessory Description Shipping Weight Part Number Price
Nickel Chain Two master links shipped with each length .5 lb/ft (.2 kg) 2000 $6/ft of chain. Sold in 10 ft lengths only.
Stainless Steel Chain “ .5 lb/ft (.2 kg) 2002 $17/ft
Gear Rack Galvanized steel rack is 3.28 ft long, works with 6 lb (2.7 kg) 719323 $51 per any FAAC slider, comes with rack-to-gate hardware per section section
Foundation Plate For ground level mounting, is 6 x 10.5 in., 6 lb (2.7 kg) 2278 $74comes with rebar anchors
Mounting Pedestal For elevated mounting, 18 in. galvanized 18 lb (8.2 kg) 2411 $221
Photobeam Directional with diagonal alignment; 2 lb (1 kg) 785163 210required for UL-325 compliance.
Receiver FAAC single channel 1 lb (.5 kg) 1RP418DS 68Transmitter FAAC single button 1 lb (.5 kg) 1TM418DS 38Transmitter FAAC two button 1 lb (.5 kg) 787317 45Antenna FAAC tuned antenna kit 2 lb (1 kg) 412003 75
Control Panel (replacement) Model 780 D 2 lb (.9 kg) 7909212 $565 Control Panel (replacement) Adapter Kit Replacement (w/ 780D board & access) 3 lb (.9 kg) 490114 $580
(replaces an existing MPS board)
Sprockets (replacement) Z16 – pin shaft 719137 $75
Z20 – pin shaft (No charge when ordered with operator only) 719135 $82
97
Model 844
Maximum Gate Length is limited by the Pulling Force requirement and the 844’s maximum motor run time of four minutes.* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
Features include:• 230 VAC• External limits• Manual release • “Soft Stop” on opening and closing• 3/4 hp motor• Oil immersed clutch which, when properly adjusted, limits the amount of pressure the operator can apply to
moving the gate• Pulling force: 100 lb (45 kg)• Speed: 50 ft/min (12 m/min)• Duty cycle: 30% motor run time• Microprocessor control: choose from 6 operating logics:
A (automatic): signal to open; signal to closeS (security): similar to A logic, useful in reducing tailgatingE (semi-automatic): garage door-like operation; signal to open, signal to closeEP (semi-automatic) similar to E logic but second signal stops gate, third signal reverses gate
B (manned, pulsed): designed for guard station use, requires 3-button switch (pulsed) to open, close and stop gateC (manned, constant): similar to B logic but 3-button switch requires constant pressure on each button• Plus - push-button programmable - reverse on contact (programmable on and off) - built-in cycle counter
Model Package Includes Weight Voltage Number Price
844 – Chain One operator, 780 D control panel, 16 or 20 tooth sprocket, protective cover, limit switch 43 lb (20 kg) 230 VAC 109902 $1,934plates, mounting angle brackets, chain-to-gate mounting hardware with nickelplatedmaster links. Note: Chain is not included (see charts below)
844 – Rack & Pinion One operator, 780 D control panel, 20 tooth pinion, mounting angle brackets and 43 lb (20 kg) 230 VAC 109837 $1,934limit switch plates. Note: Rack is not included (see charts below)
Slide Gate Operators with Oil Immersed Clutch
Accessory Description Shipping Weight Part Number Price
Nickel Chain Two master links shipped with each length of chain. .5 lb/ft (.2 kg) 2000 $6/ft Sold in 10 ft lengths only.
Stainless Steel Chain “ .5 lb/ft (.2 kg) 2002 $17/ft
Gear Rack Galvanized steel rack is 3.28 ft long, works with any FAAC 6 lb (2.7 kg) 719323 $51 per slider and comes with rack-to-gate hardware per section section
Foundation Plate For ground level mounting, is 6 x 10.5 in., comes with 6 lb (2.7 kg) 2278 $74rebar anchors to set in concrete pad
Mounting Pedestal For elevated mounting, 18 in. galvanized 21 lb (9.5 kg) 2411 $221
Photobeam Directional with diagonal alignment; 2 lb (1 kg) 785163 210required for UL-325 compliance.
Receiver FAAC single channel 1 lb (.5 kg) 1RP418DS 68Transmitter FAAC single button 1 lb (.5 kg) 1TM418DS 38Transmitter FAAC two button 1 lb (.5 kg) 787317 45Antenna FAAC tuned antenna kit 2 lb (1 kg) 412003 75
Control Panel (replacement) Model 780 D 2 lbs 7909212 $565 Control Panel (replacement) Adapter Kit Replacement (w/780D board & access) 3 lbs 490114 $580
(Replaces an existing MPS board)
Sprockets (replacement only) Z16 – pin shaft (No charge when ordered with operator only) 719137 $75Z20 – pin shaft (No charge when ordered with operator only) 719135 $82
98
Visit us online at
www.faacusa.com
Contents
Accessories
Accessories
To guarantee the safety and efficiency of its equipment, FAAC strongly recommends that qualified personnel test the safety system on an annualbasis, as well as maintain the overallhydraulic or mechanical system.
Two Year Limited Warranty on thoseaccessories manufactured by FAAC
(see back cover).
Entry Systems and Devices . . . . . 100-109Switches . . . . . . . . . . . . . . . . . . . . . . . . 101Telephone Entry Systems . . . . . . . . . . . 105Radio Controlled Systems. . . . . . . . . . . 109
Safety and Security Devices . . . . . 110-117Loops and Loop Detectors . . . . . . . . . . 110Locks . . . . . . . . . . . . . . . . . . . . . . . . . . . 115Warning Lights . . . . . . . . . . . . . . . . . . . . 117
Electrical & Hardware . . . . . . . . . . . 118-122Timers . . . . . . . . . . . . . . . . . . . . . . . . . . 118Ditek Surge Protection. . . . . . . . . . . . . . 119Control Panel Enclosures . . . . . . . . . . . 120Mounting Post . . . . . . . . . . . . . . . . . . . . 121Hinges . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Barrier Gate Accessories (see Barrier Gate section p. 85)
99
DigiKeyboard
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
18. DigiKeyboardEntering a 4 digit combination on the 9 button keyboard actuates the gate. May be programmed to one of 4,095 combinations.
Features:.Required power supply: 24 VDC (available on FAAC control panels.).Indoor or outdoor use.For use with A, E, and S FAAC control panel logics:A = automatic logic: signal to open; gate closes automatically after timed pauseE = garage door-like logic: signal to open; signal to
closeS1 = security logic: similar to A logic, useful in reducing tailgating
Dimensions:2.75 in. high x 2.75 in. wide x 3.43 in deep (7 cm x 7 cm x 8.7 cm). Depth measurement includes housing.
The DigiKeyboard requires the following additional equipment (priced separately):.Metal Housing (see #20 this section), Plastic Housing (see #21 this section), or Mounting Post Kit (see page 51).DS Decoder , (formerly called the MD01) (see #19 this section)
19. DS Decoder (for-merly MD01)This is the "brain"behind the DigiCardand DigiKeyboard
Systems. Dip switches provide for code selection. Morethan one DS Decoder may be used if multiple codes aredesired.
Features:.Required power supply: 24 VDC (available on FAAC control panels.).Plugs into 455 D control panel
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 785502PRICE: $114
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 404005PRICE: $367 each
401034737630*
Features:.Anodized aluminum
..Double post (holds Digikey ): 44 in. (111.5 cm)
3.54 in.(9 cm)
2.38 in.(5.8 cm)
2.38 in.
(5.8 cm
)
2.75 in.(7 cm)
4.5 in.
(11.5 cm
)
3.75 in.
(9.5 cm
)
Mounting Post Footprint
SHIPPING WEIGHT 9 lb PART NUMBER 401034/737630*PRICE: $170
Double Mounting Post for Digikey
DS Decoder(formerly MD01)
Gate AccessoriesAccessories
100
20. Metal Housing for DigiCard Reader & DigiKeyboard
Painted mild steel. Dimensions: 2.75 in. high x 2.75 in. wide x 2.25 in. deep (7cm x 7 cm x 5.7 cm)
21. Plastic Housing for DigiCard Reader & DigiKeyboard
Dimensions: 2.75 in. high x 2.75 in. wide x 2.25 in. deep (7cm x 7 cm x 5.7 cm)
22. T10 Key SwitchFeatures:.Switch rating: 250 VAC; 10 amps.Indoor or outdoor use.Key returns when released.N.O. (Normally Opened) and N.C. (Normally Closed) ConnectionFor use with A, E, and S FAAC control panel logics:A = automatic logic: signal to open; gate closes automatically after timed pauseE = garage door-like logic: signal to open; signal to closeS1 = security logic: similar to A logic, useful in reducing tailgatingDimensions: 2.75 in. high x 2.75 in. wide x 4 in. deep (7 cm x 7 cm x 10.2 cm) Depth measurement includes housing.The T-10 Key Switch requires the following additional equipment (priced separately):.Metal housing (see #25 this section) or Plastic Housing (see #26 this section)
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 401010036PRICE: $93
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 720043PRICE: $12.00
SHIPPING WEIGHT 3 lb (1.4 kg)PART NUMBER 720037PRICE $37.00 Metal Housing for
DigiCard Reader &DigiKeyboard
Plastic Housing forDigiCard Reader &DigiKeyboard
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
T10 Key Switch
Gate AccessoriesAccessories
101
T-10E Key Switch
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
23. T-10E Key SwitchFeatures:.Switch rating: 250 VAC; 10 amps.Indoor or outdoor use.Key returns when released.N.O. (Normally Opened) and N.C. (Normally Closed) ConnectionFor use with A, E, and S FAAC control panel logics:A = automatic logic: signal to open; gate closes automatically after timed pauseE = garage door-like logic: signal to open; signal tocloseS1 = security logic: similar to A logic, useful in reducing tailgatingDimensions: 3.75 in. high x 2.75 in. wide x 1.75 in. deep (9.5 cm x 7 cm x 4.5 cm) .Classy brushed aluminum look.Designed to fit into the popular FAAC brushed aluminumphotobeam stand (See p. 67 of the Price List)
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 401019036PRICE: $96
102
Entry Systems and Security DevicesAccessories
Multi-Use Plastic Housing
Multi-Use Metal Housing
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
Two-Button Switch
24. Two-Button SwitchFeatures:.Switch rating: 250 VAC; 16 amp.Built-in warning light: 24 VAC; 3 watt (powered off dedi-cated FAAC control panel terminals.).Indoor use only.Open button has a N.O. (Normally Opened) and a N.C.(Normally Closed) Connection..Stop button has a N.O. (Normally Opened) and a N.C.(Normally Closed) Connection.For use with A, E, and S FAAC control panel logics:A = automatic logic: signal to open; gate closes automatically after timed pause.E = garage door-like logic: signal to open; signal tocloseS1 = security logic: similar to A logic, useful in reducing tailgatingDimensions: 2.75 in. high x 2.75 in. wide x 4 in. deep (7 cm x 7 cm x 10.2 cm) Depth measurement includes housing.The Two Button Switch requires the following additional equipment (priced separately):.Metal housing (see #25 this section) or Plastic Housing (see #26 this section)
25. Multi-Use Metal Housing (For T-10 Key Switch, Two Button FAAC Switch, andsome photocells)Powder coated steel.Dimensions: 2.5 in. high x 2.5 in. wide x 2.75 in. deep(6.4 cm x 6.4 cm x7 cm)
26. Multi-Use Plastic Housing (For T-10 Key Switch, Two Button FAAC Switch, andsome photocells)Dimensions: 2.5 in. high x 2.25 in. wide x 2.75 in. deep(6.4 cm x 5.7 cm x7 cm)
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 720043PRICE: $12.00
SHIPPING WEIGHT 3 lb (1.4 kg)PART NUMBER 720089PRICE: $37.00
SHIPPING WEIGHT 3 lb (1.4 kg)PART NUMBER 401002PRICE: $72.00
Entry Systems and Security DevicesAccessories
103
Two-Button Switch
Three-Button Switch
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
27.Two-Button SwitchFeatures:.Switch rating: 250 VAC; 10 amps.Built-in warning light: 24 VAC; 3 watt (powered off dedicated FAAC control panel terminals.).Indoor or outdoor use.Painted aluminum.Surface mounted.Actuate button is N.O. (Normally Opened).Stop button is N.C. (Normally Closed)For use with A, E, and S FAAC control panel logics:A = automatic logic: signal to open; gate closes automatically after timed pauseE = garage door-like logic: signal to open; signal to closeS1 = security logic: similar to A logic, useful in reducing tailgatingDimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep(10.2 cm x 7.3 cm x 5.7 cm)
28. Three-Button SwitchFeatures:.Switch rating: 250 VAC; 10 amps.Indoor or outdoor use.Painted aluminum.Surface mounted.Open buatton is N.O. (Normally Opened).Close button is N.O. (Normally Opened).Stop button is N.C. (Normally Closed)For use with B, C, and P FAAC control panel logics:B = 3 momentary switches: open, close and stopC = 2 continuous pressure switches: open and close; 1 momentary pressure switch: stopP = 3 momentary switches: open, close and stopDimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep(10.2 cm x 7.3 cm x 5.7 cm)
SHIPPING WEIGHT PENDING - Please call FAAC for more information
PART NUMBER
SHIPPING WEIGHT PENDING - Please call FAAC for more information
PART NUMBER
Entry Systems and Security DevicesAccessories
104
29. FAAC Telephone Entry - PhoneLinkFeatures:.Available in 50 & 500 code capacity.Programmable personal master code.Programmable latch code.Programmable "one shot" code.Programmable "sleep" code,
disables both keypad & call button.2 relays.Adjustable volume.Event input.Night light with "60 second on" capability.Optional camera.Unique double ring cadence.Call waiting.Call button disconnect.By-pass switch included
Dimensions: 7.4 in. x 7.4 in. x 5 in. (18.8 x 18.8 x 12.7 cm)
30. Select Engineered Systems Telephone Entry - TEC IIFeatures:.LCD screen easy to read day or night .Directory displays two lines of characters, 5/19 in. size.14 characters per name.14 digit phone number per name.2 entrances expandable to 4 entrances.Programmable code and PIN lengths 1-9 digits.Modem capability: 1200 or 9900 baud (Selcom 95 or2000).Programmable via key pad, modem, RS232 or currentloop.Programmable open key pad for voice mailDimensions: 10 in. wide x 14 in. high x 2.75 in. deep (25cm x 36 cm x 7 cm)
SHIPPING WEIGHT 15 lb (6.8 kg)PART NUMBER 3033PRICE Call us at 800-221-8278
PhoneLink
Shipping PartModel Weight Number PricePhoneLink - 50 code 9 lb (4.1 kg) 2875 Call
PhoneLink - 500 code 9 lb (4.1 kg) 2876 Call
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
New!
TEC II
Entry Systems and Security DevicesAccessories
105
TEC 101
TEC IV
Select Gate
31. Select Engineered Systems Telephone Entry - TEC IVThe TEC IV is identical to the TEC II (#14) except.LCD Directory displays 4 names, 3/8 in. sizeDimensions: 10 in. wide x 14 in. high x 3 in. deep (25cm x 36 cm x 8 cm)
32. Select Engineering Systems Telephone Entry - Select Gate 2Features:.Uses existing phone lines .Lighted front panel.Local call waiting (bi-directional).Call forwarding capability.Dials 5 outside phone numbers.Four selectable ring styles.Programmed memory not affected by power failure.Optional 2nd and 3rd relaysDimensions: 9.5 in. wide x 7 in. high x 4.33 in. deep (24cm x 18 cm x 11 cm)
33. Select Engineered Systems Telephone Entry - TEC 101Features:.No sunshield needed to read LCD display.Programmable via keypad or with optional modem and software
.Four capacities: 50, 125, 500 and 995. Each offers same number of phone numbers, PIN codes and names.
.Dials up to 14 digit telephone numbers
.Two line LCD display, provides directory names one at a time
Dimensions: 8 in. wide x 11 in. high x 3 in. deep20 cm wide x 28 cm high x 8 cm deep
SHIPPING WEIGHT 11 lb (5 kg)PART NUMBER (50 Code Version) 2847PRICE Call us at 800-221-8278
SHIPPING WEIGHT 8 lb (3.6 kg)PART NUMBER 3070PRICE Call us at 800-221-8278
SHIPPING WEIGHT 15 lb (6.8 kg)PART NUMBER 3034PRICE Call us at 800-221-8278
Entry Systems and Security DevicesAccessories
106
34. FAAC AdvantageDK Keyless EntryFor keyless access needs.Features:.Programmable four digit codes available:
1000.Programmable personal master code.Programmable latch/unlatch code.Programmable "sleep" code."Three strikes, you're out" - resets in 2 minutes.External event input.Two relays w/ variable output time: 1-99 seconds.LED indicators.Optional camera (intercom versions only).Audible tone.Non-volatile memory.Night light.Limited two year warranty
Dimensions:.ADV-05 to ADV-1000: 5.25 in. x 4.75 in. x 4.5 in.
(14.6 x 12.1 x 11.4 cm)
ADV-1000
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
New!
Shipping PartModel Weight Number Price
Model ADV-1000 5 lb (2.3 kg) 2916 $456
Entry Systems and Security DevicesAccessories
107
Fire Entry UnitMicro-Switch StylePart # 2981
Fire Entry UnitKnox StylePart 2980
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
35. Fire Entry UnitSuitable for outdoor use and can be used with all FAACcontrol panel logics (if you have questions, call FAAC at1-800-221-8278).There are two versions: one Knox style and one micro-switch style
Features:• Both versions are painted bright red for high visability• Both have a zinc galvanized box with UV-protected powder coated paint• Both have a box which can hold keys or manualrelease handles for access if electrical power is unavail-able (see explanation of “gate safe” and “gate secure”installations on page 9 of the Products Catalog or PriceList).
Model 2980• Uses a Knox lock (lock not provided). Knox locks areprovided by local fire departments or by the KnoxCompany.
Model 2981• Uses a padlock (lock not provided)• Has a hinged door with built-in micro-switch. Openingthe door activates the switch.
Specifications:• Required power supply: none required• Micro switch: Normally Opened (N.O.) and NormallyClosed (N.C.)Dimensions: 5.5 in. high x 4.5 in. wide x 4 in. deep (14cm x 11.4 cm x 10.2 cm)
SHIPPING WEIGHT 5 lb (2.3 kg)PART NUMBER 2981 (Micro-switch style)PRICE: $178
SHIPPING WEIGHT 5 lb (2.3 kg)PART NUMBER 2980 (Knox style)PRICE: $185
Entry Systems and Security DevicesAccessories
108
39. FAAC RP Interface Board (to use FAAC receiver with non-FAAC product)
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 787725PRICE $55.00
FAAC Radio Controlled System36. FAAC TM1418 Transmitter
Features:.Choice of over 1000 codes.12V battery included Dimensions: 1.5 in. x 3 in. x .63 in. Note: the FAAC TM1418 transmitterrequires the FAAC RP1418 receiver (priced separately).
36-A. FAAC XT4 433RC Transmitter Features:.Rolling code technology - the code varies when transmitter is used Analgorithm recognizes and confirms the signal..12V battery included .4 channelsVisor clip includedDimensions: 2 in. x 2.5 in. x .1/2 in. Note: the FAAC XT433RC receiver (priced separately).
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 787453PRICE $23.0037. FAAC TM1418 Dual Transmitter
Features: Same as Single TransmitterNote: The FAAC TM1418 transmitterrequires the FAAC RP1418 receiver andthedual interface board (see #37 below)
.SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 787317PRICE $45.00
Entry Systems and Security DevicesAccessories
38. FAAC RP1418 Receiver The modular FAAC RP1418receiver can be connected directly to anyFAAC electronic control panel.Features:.Required power supply: 24DVC.Eliminates the need to hard wireinto the control panel. .Dip switches provided for codeselection Reception range (may vary withenvironmental conditions.)With built-in antenna wire:
up to 100 ft (30 m)With tuned aerial antenna kit:
up to 300 ft (91 m) Dimensions: 2 in. x 2 in.
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 1RP418DSPRICE $68.00
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 1TM418DSPRICE $38.00
38-A. FAAC RP433RC Receiver The modular FAAC RP433RC receiver can be connected directly to any FAACelectronic control panel.Features:.Required power supply: 24DVC.Eliminates the need to hard wire intothe control panel. .Rollind code technology
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 787741PRICE $50.00
36.
36-A.
37.
New!AvailableApril 09’
Call FAAC
for more
details
109
42. DSP-7LP Vehicle DetectorThe DSP-7LP will operate on any voltage from 10 to 30 VoltsAC or DC and draws approx. 1 milliampere while waiting for acar. The power LED winks continuously once per second toindicate that the detector is operating in the low power mode.The detector’s small size and lack of any switches or dialsmakes the DSP-7LP the industry’s first solar friendly “Plug-and-Play” vehicle detector. The DSP-7Lp is preset to the nor-mal sensitivity level used in parking/access control applica-tions, and tunes itself to the best operating efficiency.Feature include:• Loop Size – any in-ground inductive loop from 20 to 1200nH• Sensitivity – automatic. it compensates for large loops andlarge lead-ins• Output Ratings – single output, 1 amp relay at 30 VDC resi-tive• Loop Failure – green power indicator flashes twice per sec-
ond if loop circuit is open and 10 times per second if loop cir-cuit is shorted. it operates in the fail-safe mode and will outputa “Detect” for either of these loop failure conditions.• Size – 1.52 in.H x 2.9 in. W x 1.56 in. D• Connector – removable 7-pin terminal block. Pin assign-ments are:1 – Relay (NC) (opens for detect)2 – Relay Common3 – Relay (NO (closes for detect)4 – Power common5 – Power in6 – Loop7 – Loop
• Operating Temperature – -35° to 165°F (-37°C to 74°C)
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 2659PRICE $201
FAAC Tuned Antenna Kit
40. FAAC Tuned Antenna Kit The standard kit includes:. 16 ft (5 m) of coax cable. 10.5 in. (26.7 cm) whip antenna . Gate mount bracket
41. FAAC Model DSP-15 Vehicle DetectorThe DSP-15 has been specifically designed to handle all parking, drive-through and access control applications on virtually any size loop..Required power supply: 24 VDC.Dimensions of board: 4 in. wide x .87 in. highx 2.75 in. deep (10.2 cm x 2.2 cm x 7 cm)
1. Selectable signaling provided by 2 relays:a) Relay A provides main detection output which
can be modified by delay and extensionb) Relay B is switch selectable to one of four options:
1) True presence (no extension or delay)2) Pulse on vehicle entering loop3) Pulse on vehicle exiting loop4) Loop fail outputFrequency: automatically tunes within one of four operating ranges
Sensitivity: .10 sensitivity settingscan be used in special applications
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 412003PRICE: $75 .00
to insure complete detection of high-bed vehiclesConnector: ten position terminal block(no harness required)Indicators: separate power/fail anddetect LED’sLoop size: works on any in-groundinductive loop from 20 to 1000uHHold time: normal or extended hold
time is selectableLoop failure: if the loop fails, opens or shorts, the powerindicator flashes. Output B can also indicate this posi-tion if desired. The option to “remember” an intermittentloop failure is also provided.Delay: can be selected to ignore fast moving vehicles over the loopExtension: extends a call for slow moving vehicles
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 2664PRICE $200
Loops and Loop Detectors
Entry Systems and Security DevicesAccessories
110
Loops and Loop Detectors44. DSP-10 Vehicle Detector
The DSP-10 has been specifi-cally designed to handle allparking, drive-thru and accesscontrol applications. Can beused as either a safety loop orfree exit loop detector. Withflexibility of “fail-safe” or fail-secure,” it is the only parkingdetector you will ever need.
Model types: DSP-10-LV: low voltage version, 10-30 volts AC or DC
DSP-10-117: medium volt version, 117 volts ACDSP-10-230: high volt version, 230 volts ACEnclosure: impact resistant, high temperature plas-tic, 1.75 in. wide x 2.375 in. high x 3.61 in. deep (45 mm x 60 mm x 92 mm)
Loop Size: works on any in-ground inductive loop from 20 to 1000 nH.
Sensitivity: 10 settingsFrequency: automatically tunes within one of four operating ranges
Outputs: Two separate relay outputs that are frontpanel programmable:Output A – main detection output. Can be modified by delay and extension. Factory set to fail-safe. Output B – can be set to one of the following:
1) true presence (no extension or delay)2) pulse on vehicle entering loop3) pulse on vehicle exiting loop4) loop fail output
Sensitivity Boost: can be used in special applica-tions to insure complete detection of high-bed vehicles.
Loop Failure: if loop fails (opens or shorts) power indicator flashes. Option to “remember” an intermittent loop failure also available.
Delay: can be selected to ignore fast moving vehi-cles over the loop.
Extension: extends a call for slow moving vehicles.
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 2667PRICE $130
43. DSP-11 Vehicle DetectorThe DSP-11 is a switch-lessvehicle detector with industrystandard 11-pin base. Thesenew detectors have beendesigned to handle parking,drive-thru and access controlapplications.
Model types: DSP-11-LV: lowvoltage version, 10-30 volts AC or DCDSP-11-117: medium volt version, 117 volts AC
Dimensions: 1.4 in. wide x 1.4 in. high x 2.75 in.deep (3.56 cm x 3.56 cm x 7 cm)
Loop Size: works on any in-ground inductive loop from 20 to over 1500 nH
Indicators: separate power/fail and detect LED’sDetect Memory: power interruptions of short duration are ignored. If power fails for approx. 1.5 sec. or less the detector “remembers” a vehicle.
Sensitivity: automatic – compensates for large loops and long lead-ins.
Loop Failure: green power indicator flashes slowly if the loop circuit is open and quickly if loop circuit is shorted. The detector will output a “detect” for either of these loop failed conditions.Fail Safe Operation: All DSP detectors are designed to be Fail Safe in their operation. It will output a “detect” (contact closure) for a “failed” loop condition OR a loss of power to the detector.Output Relay: 1A at 125 VAC general use, 1A at 30 VDC resistive. Both N.O. (closes for detect) and N.C. (opens for detect) outputs.
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 2665PRICE $120
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
Entry Systems and Security DevicesAccessories
111
Loops and Loop Detectors
Shipping Part PriceLoop Size Weight Number
4 ft x 6 ft (1.2 m x 1.8 m) 5 lb (2.3 kg) 2562 $177
4 ft x 8 ft (1.2 m x 2.4 m) 5 lb (2.3 kg) 2566 $194
Note: A rule of thumb for determining the height of a loop’s inductive field is: the height of the inductive field is 2/3 the length of the loop’s shortest side.
Saw Cut Loop
Saw Cut Loop
Saw-Cut Loops
Shipping Part PriceLoop Size Weight Number
2 ft x 6 ft (0.6 m x 1.8 m) 4 lb (1.8 kg) 2590 $124
4 ft x 6 ft (1.2 m x 1.8 m) 4 lb (1.8 kg) 2591 $158
4 ft x 8 ft (1.2 m x 2.4 m) 4 lb (1.8 kg) 2567 $174
4 ft x 10 ft (1.2 m x 3.0 m) 4 lb (1.8 kg) 2592 $191
6 ft x 12 ft (1.8 m x 3.7 m) 4 lb (1.8 kg) 2569 $224
Note: Other loop sizes, lead-in lengths, 14 Gauge Wire, and PVC Insulation are available on request.
Note: Other loop sizes, lead-in lengths, 14 Gauge Wire, and PVC Insulation are available on request.
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
45. Saw Cut Loops with 30 ft (9.1 m) Twisted Pair Lead-in18 gauge, XLP insulation
46. Saw Cut Loops with 50 ft (15 m ) Twisted Pair Lead-in 18gauge, XLP insulation
Entry Systems and Security DevicesAccessories
112
Linear Feet of Coverage for One Cartridge Linear Meters of Coverage for One Cartridge
Saw Cut Saw Cut Width in Inches Saw Cut Saw Cut Width in cmDepth in Inches .13 .2 .25 .5 Depth in cm 0.3 0.5 0.6 1.3
1 36 ft 24 ft 18 ft 9 ft 2.5 11 m 7.3 m 5.5 m 2.7 m
1.5 24 ft 18 ft 12 ft 6 ft 3.8 7.3 m 5.5 m 3.7 m 1.8 m
2 18 ft 12 ft 9 ft 4.5 ft 5.1 5.5 m 3.7 m 2.7 m 1.4 m
Loops and Loop Detectors
Shipping PartLoop Size Weight Number Price
2 ft x 6 ft (0.6 m x 1.8 m) 4 lb (1.8 kg) 2593 $172
4 ft x 6 ft (1.2 m x 1.8 m) 4 lb (1.8 kg) 2594 $190
4 ft x 8 ft (1.2 m x 2.4 m) 4 lb (1.8 kg) 2595 $199
4 ft x 10 ft (1.2 m x 3.0 m) 4 lb (1.8 kg) 2596 $212
6 ft x 12 ft (1.8 m x 3.7 m) 4 lb (1.8 kg) 2597 $243
Pave-Over Loop
Pave-Over Loops
Note: Other loop sizes and lead-in lengths are available on request.
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
Note: the thickness of the loop wire in the preceding #43 and #44 is .13 in. (0.32 cm). The wire’s height ranges from .55 in. (1.4 cm) to .34 in. (0.86 cm).
47. Loop Sealant for Saw Cut Loops 30 fl. oz. (0.9 L) caulking cartridge
48. .5 in. (1.24 cm) Flexible Conduit Pave-Over Style Loops with 30 ft (9.1 m) Twisted Pair Lead-in
Shipping PartQuantity Weight Number Price
Grey Sealant 3 lb (1.4 kg) 2166 $80
Black Sealant 3 lb (1.4 kg) 2180 $80
Entry Systems and Security DevicesAccessories
113
Shipping Part LengthSize Weight Number Price
50 ft 5 lb (2.3 kg) 2603 Call for Pricing
Loops and Loop Detectors
Shipping Part LoopSize Weight Number Price
2 ft x 6 ft (0.6 m x 1.8 m) 5 lb (2.3 kg) 2561 $190
4 ft x 6 ft (1.2 m x 1.8 m) 5 lb (2.3 kg) 2560 $209
4 ft x 8 ft (1.2 m x 2.4 m) 5 lb (2.3 kg) 2559 $218
4 ft x 10 ft (1.2 m x 3.0 m) 5 lb (2.3 kg) 2558 $230
6 ft x 12 ft (1.8 m x 3.7 m) 5 lb (2.3 kg) 2557 $261
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
50. .5 in. (1.24 cm) Flexible Conduit for Lead-in Protection
49. .5 in. (1.24 cm) Flexible Conduit Pave-Over Style Loops with 50 ft (15 m) Twisted Pair Lead-in
Entry Systems and Security DevicesAccessories
114
Locks
Single Cylinder Electric Lock(strike plate not pictured)
Double Cylinder Electric Lock(strike plate not pictured)Side assembly of electric lock for 1-leaf gate
6 in. (14.9 cm)
5 in. (12.4 cm) .2 in. (.5 cm)4 in. (10 cm)
1.5 in. (3.6 cm)
.2 in. (.5 cm)
1 Electric lock2 Base plate3 Strike plate4 Side rabbet ledge5 Spring latch6 Through cylinder and barrel (double cylinder electric lock only)
7 Pilot8 Sliding guide9 Cover plateNOTE: Items 4,7,8,& 9 are not included with lock.
52. FAAC Single Cylinder Electric LockFeatures:.Required power supply: 12 VAC pulsed(available on FAAC control panels.).Manual keyed operation from one side of the gate.3 keys provided.Strike plate included
53. FAAC Double Cylinder Electric LockFeatures:.Required power supply: 12 VAC pulsed(available on FAAC control panels.).Manual keyed operation from both sides of the gate.6 keys provided.Strike plate included)
SHIPPING WEIGHT 6 lb (2.7 kg)PART NUMBER 712650/712652*PRICE $220
SHIPPING WEIGHT 6 lb (2.7 kg)PART NUMBER 712650/712651*PRICE $196
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact ourtechnical department at 1-800-221-8278.
Entry Systems and Security DevicesAccessoriesEntry Systems and Security Devices
115
Locks
Model M62-GFElectromagnetic Lock
(strike plate not pictured)
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
54. Securitron Model M62-GF Electromagnetic Lock
Features:.Required power supply: 24 VDC (available on FAAC control panels.).Holding force: 1200 lb (540 kg).Conduit connector: Universal .5 in. ID (female) .75 in. OD (male).Four mounting holes on the face of the lock.Strike plate.Attachment hardwareDimensions:8 in. wide x 1.75 in. deep x 2.9 in. high(20.3 cm x 4.4 cm x 7.4 cm)The Securitron Model M62-GF Electromagnetic Lockrequires the following additional equipment (priced sepa-rately) when used with a FAAC control panel:12 VAC External Relay (See #55 below)
55. 12 VAC External RelayUse with MAG lock
SHIPPING WEIGHT 1 lb (.5 kg)PART NUMBER 2630PRICE $52
Z BRACKETPART NUMBER 2690PRICE $186
SHIPPING WEIGHT 14 lb (6.4 kg)PART NUMBER 2353PRICE $742
12 VAC External Relay
.1 in. (.26 cm)
.52 in. (1.3 cm)
.12 in. x .05 in.(.3 x .12 cm) hole
.84 in. (2.2 cm)
.14 in. (.35 cm) 1.4 in.
(3.6 cm) or less
.08 in. (.2 cm)
.02 in. (.05 cm).16 in. (.42 cm).25 in. (.64 cm).25 in. (.65 cm)
.21 in. (.55 cm)1
.07 in. (2.8 cm)
1.7 in. (4.4 cm)
1.5 in. (3.8 cm)
Entry Systems and Security DevicesAccessories
116
56. Securitron Model M32F-24 Electromagnetic Lock
Features:.Required power supply: 24 VDC (available on FAAC control panels.).Holding force: 600 lb (270 kg).Two mounting holes on the face of the lock.Strike plate.Attachment hardwareDimensions:8 in. wide x 1.5 in. deep x 1.88 in. high(20.3 cm x 3.8 cm x 4.8 cm)The Securitron Model M32F Electromagnetic Lockrequires the following additional equipment (priced sepa-rately) when used with a FAAC control panel:12 VAC External Relay (See #55 on P. 140)
57. FAACLampConnects to FAAC 115 VAC or 230 VAC control panels;please specify voltage when ordering. .Amber light flashes while gate opens and closesDimensions: 4 in. x 4.5 in. (5.5 in. including base) x 5 in.(10 cm x 11.5 cm [14.2 cm] x 13 cm)
Z BRACKETPART NUMBER 3150PRICE $178
SHIPPING WEIGHT 12 lb (5.4 kg)PART NUMBER 2354PRICE $534
SHIPPING WEIGHT 1.1 lb (.5 kg)PART NUMBER 410013 (230 VAC)PART NUMBER 410013* (115 VAC)PRICE $65
REPLACEMENT BULB 2128 (230 VAC)2132 (115 VAC)
PRICE $15
Warning Lights
FAACLamp
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
Model 32FElectromagnetic Lock
(strike plate not pictured)
Entry Systems and Security DevicesAccessoriesEntry Systems and Security Devices
117
Transformer
Timers
Grasslin Digi 20-A-24 Time Switch
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
58. Grasslin Digi 20-A-24 24hr 7 day Time Switch
Features:.Required power supply: 24 VAC or 24 VDC (availableon FAAC control panels).Output relay rating: 277 VAC, 16A.Output relay: Single Pole Double Throw.Signals up to 20 times per timing period.Maximum timing period: 1 week.Minimum time between signals: 1 minute.Daylight time change over: Manual.Manual override
60. Transformer/Step-up-Step Down.120 VAC > 240 VAC.240 VAC > 120 VAC.500 VA.Enclosure 3R outdoor.UL/CSA ListedDimensions will not exceed: 4.5 in. wide x 9.5 in. high x 4 in. deepNote: Position of mounting tabs on case may vary
SHIPPING WEIGHT 17 lb (7.7 kg)PART NUMBER 2199PRICE $466
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 2144PRICE $304
Electrical and HardwareAccessories
118
Ditek surge protectors detect potentially harmful surges in electrical current and re-direct these surges to ground.
Ditek Surge Protector for 110/125/220 VAC circuits
(115 version shown; 220 version has similarconfiguration, but larger dimensions)
Ditek Surge Protector for Low-VoltageCircuits
Ditek Surge Protection
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
61. Hard Wired Protection for 110/125 VAC circuits. Self-restoring after each surge within ratings. .5 in. conduit connector providedDimensions: 3 in. wide x 1.9 in. high x 1.5 in. deep(7.6 cm x 4.8 cm x 3.8 cm)
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 2355PRICE $135
62. Hard Wired Protection for 220 VAC SinglePhase Circuits. Self-restoring after each surge within ratings. .5 in. conduit connector providedDimensions: 4 in. wide x 2 in. high x 2 in. deep (10.2 cm x 5.1 cm x 5.1 cm)
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 2356PRICE $168
63. Screw Terminal Connection Protectionfor Low Voltage Power Loop, Voice, andData Circuits . Provides protection for power, data, LED andaudible circuits. One model protects 5V, 12V and 24V circuits. Self-restoring after each surge within ratingsDimensions: 3 in. wide x 1.6 in. high x 1.6 in. deep(7.6 cm x 4 cm x 4 cm)
SHIPPING WEIGHT 2 lb (1 kg)PART NUMBER 2357PRICE $175
Electrical and HardwareAccessories
119
Enclosures
Model FRP enclosure
2.2 in.
(5.6 cm)
8.03 in.(20.4 cm)
10.4 in.(26.5 cm)
3.38 in.(8.5 cm)
Model E plastic enclosure
Plastic enclosure with lockable hinged cover
10 in.(25.4 cm)
12 in.(30.5 cm)
5.5 in.(14 cm)
8.38 in.(21.3 cm)
4.65 in.(11.8 cm)
10.6 in.(27 cm)
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
64. Model FRP (Fiber Reinforced Plastic)Enclosure The Model FRP is ideal for applications thatrequire an enclosure that is extremely tough.. Strong, highest quality construction. Rubberized gasket door seal. Includes metal mounting plate with grounding lug. UL and CSA Listed. Two .9 in. (2.2 cm) pre-drilled holes in box bottom
SHIPPING WEIGHT 6 lb (2.7 kg)PART NUMBER 2359PRICE $218
65. Model L (Latching) Plastic Enclosure. Keyed latch on hinged door. Rubberized gasket door seal. Door can open to right or left.Will accept DIN rail. Molded standoffs for control panel mounting. Three 1.13 in. (30 mm) pre-drilled holes (withplugs) in box bottom. Two .75 in. (2 cm) knockouts in box bottom
SHIPPING WEIGHT 5 lb (2.3 kg)PART NUMBER 720118PRICE $64
66. Model E (Economy) Plastic Enclosure. Rubberized gasket door seal.Will accept DIN rail. Molded standoffs for control panel mounting. Three 1.13 in. (3 cm) pre-drilled holes (withplugs) in box bottom. Two .75 in. (2 cm) knockouts in box bottom
SHIPPING WEIGHT 4 lb (1.8 kg)PART NUMBER 720119PRICE $42
Electrical and HardwareAccessories
120
SHIPPING WEIGHT 10 lb (4.5 kg)PART NUMBER 2104PRICE $165
Gooseneck FootprintGooseneck FaceprintUniversal Gooseneck
.25 in.(.6 cm)
.38 in.(1 cm)
1.9 in.(4.8 cm) 3.86 in.
(9.8 cm)
.75 in.(1.9 cm)
1.14 in.(2.9 cm)
5 in.(12.7 cm)
5 in.(12.7 cm)
1.18 in.(3 cm)
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
Enclosures
Mounting Post
Large Fiberglass Enclosure, opened and locked
67. 14 in. x 16 in. x 6 in. Fiber Reinforced Enclosure. Hinged lockable. Strong, highest quality construction. Rubberized gasket door seal.Weather resistant. UL and CSA Listed.Two .9 in. (2.2 cm) pre-drilled holes in box bottom
68. Gooseneck Mounting PostPowder coated steel. Height: 41.75 in. (106 cm).Mounting face: 3.75 in. x 3.75 in. (9.5 cm x 9.5 cm)
SHIPPING WEIGHT 16 lb (7.3 kg)PART NUMBER 3300PRICE $500
W/backplate wired 115V
SHIPPING WEIGHT 16 lb (7.3 kg)PART NUMBER 3303PRICE $500
W/backplate wired 230V
SHIPPING WEIGHT 16 lb (7.3 kg)PART NUMBER 3306PRICE $500
W/backplate wired 24 VDC
Electrical and HardwareAccessories
121
SHIPPING WEIGHT 16 lb (7.3 kg)PART NUMBER 3312PRICE $340
Enclosure - no backplate
Model 2000 Large Standard Hinge,
Prime Coated
* Measurements and weights stated in this Price List are approximate. For exact specifications, please refer to the Installation Manual or contact our technical department at 1-800-221-8278.
New!
New!
69. Guardian 2000 Large Standard Hinge, Prime CoatedIdeal for heavy or high-traffic gates where reliabili-ty is essential.Features:. Both sides mount to a flat weld surface. Rated at 3,000 lbs per pair
SHIPPING WEIGHT 6 lb (2.7 kg)PART NUMBER 3500PRICE $152
70. Guardian 2001 Small Standard Hinge, Prime CoatedIdeal for heavy or high-traffic gates where reliabili-ty is essential.Features:. Both sides mount to a flat weld surface. Rated at 600 lbs per pair
SHIPPING WEIGHT 2.5 lb (1.1 kg)PART NUMBER 3502PRICE $103
HingesAccessories
122
Model 2045 Aluminum Bolt On Hinge
New!
New!
71. Guardian 2040 Aluminum Standard HingeWell suited for aluminum gates and for environ-ments where rusting is a problem.Features:. Both sides mount to a flat weld surface. Rated at 400 lbs per pair
SHIPPING WEIGHT 2.5 lb (1.1 kg)PART NUMBER 3504PRICE Call for Pricing
72. Guardian 2045 Aluminum Bolt On HingeIdeal for situations where welding is not desired and rusting is a problem.Features:. Perfect for vinyl fences.. Load bearing capacity dependent on attachmentbolts used. (attachment bolts not included).
SHIPPING WEIGHT 3 lb (1.4 kg)PART NUMBER 3506PRICE Call for Pricing
HingesAccessories
123
Exploded Views & Pricing
Model 412 . . . . . . . . . . . . . . . . . . . . . . . 126Model 415 . . . . . . . . . . . . . . . . . . . . . . . 127Model 400 . . . . . . . . . . . . . . . . . . . . . . . 128Model 402 . . . . . . . . . . . . . . . . . . . . . . . 132Model 422 . . . . . . . . . . . . . . . . . . . . . . . 134Model 750 . . . . . . . . . . . . . . . . . . . . . . . 136Model 760 . . . . . . . . . . . . . . . . . . . . . . . 139Model 620 . . . . . . . . . . . . . . . . . . . . . . . 143Model 640 . . . . . . . . . . . . . . . . . . . . . . . 145Model 620/640 Articulated Kit . . . . . . . . 147Model 620/640 Beam Skirt Kit. . . . . . . . 147
125
Exploded Views
POS PART NO DESCRIPTION QTY LIST PRICE11233
79936079935971300971713457171335
Motor Housing, SX Top SectionMotor Housing, DX Top SectionManual Release Key, 412Flange, Protective Cover, 412 SXFlange, Protective Cover, 412 DX
11111
151.00151.008.0014.0014.00
4
5
6
N/A
N/A
799358
Nickel Plated Self Tapping Screw(3.5 x 13mm)
Self-Tapping Screw(5.5 x 15mm)
Cylinder Collar
1
2
1
N/A
N/A
18.00
7889
736060727148727147N/A
Cylinder Assembly NewEnd Cap, Protective Cover SXEnd Cap, Protective Cover DXNickel Plated Self-Tapping Screw
(3.5 x 9.5mm)
1113
169.006.006.00N/A
POS PART NO DESCRIPTION QTY LIST PRICE1010111213
27052707727216722298N/A
Capacitor for 115V (25uf)Capacitor for 220V (8uf)Protective Cover, 412Protective Cover Support, 412Self Tapping Screw (5 x 18mm)
11114
10.008.0068.0016.00N/A
1415151617
716056746030746755746028N/A
Motor Housing, Bottom SectionStator (Motor) for 220VStator (Motor) for 115VRotor (Motor)Strain Relief, 412
11111
40.0098.00113.0070.00N/A
18 390009 Skin Pack, 412(1 pack = 2 operators)
1 115.00
Exploded View, Model 412
126
BLOW-UP VIEW, MODEL 415
POS PART NO DESCRIPTION QTY LIST PRICE12345
722001572840057183667182075N/A
Rear Mounting BracketRear Mounting PlateLong Pin With C ClipsShort PinHex Nut
11111
31.0016.0014.0011.00N/A
67899
722801571614842840360202145N/A
Rear ForkRear Upper BodyManual Release AssemblySnap RingNickel Plated Self Tapping Screw
11111
33.0061.0060.0040.00N/A
1011121314
60202155716150490108718354N/A
Manual Release LeverLimit Switch Protective CoverLimit Switch AssemblyFront Mounting Pin w/ C ClipsSelf Tapping Screws (4.2mm x 13mm)
11117
14.0067.0094.006.00N/A
15 728271 Front Mounting Bracket 1 37.00
POS PART NO DESCRIPTION QTY LIST PRICE1617181920
711027490104718367499399N/A
Limit Switch Adjusters CoverCylinderScrew Drive Pin and C ClipsLower Front CoverSelf Tapping Screw (6.3mm x 19mm)
11118
14.00110.002.0020.00N/A
2122
2324
60202225N/A
6020216560202215
Gear (Piston)Self Tapping Screw(4.8mm x 13mm)
BushingGear (Motor)
110
21
65.00N/A
14.0082.00
2526272829
770890709324602021757161492705
Motor 115VacGasketElectric Cable CoverRear Body Lower Half25uf Capacitor
11111
194.0014.0028.0063.0010.00
30 490106 Skin Pack 415 L LS 1 61.00
127
POS PART NO DESCRIPTION QTY LIST PRICE12345
20367220015728400571820757228015
Galvanized Nut (8mm)Rear BracketRear Bracket PlateShort PinRear Fork
11111
3.0031.0016.0011.0033.00
6891011
203770991015490325N/A7119475
Self-Locking Nut (8 mm)Gasket (D80)Locking Cap KitSelf Threading Screw (4mm)Vibration Dampener
12112
3.004.00
58.00 N/A3.00
12131415*16
236523662367770004257119485
Motor Bolt (4x50 mm)Lock Washer (4 mm)Hex Nut (4 mm)115V 1400 RPM MotorVibration Dampener
44442
3.003.00 3.00
167.003.00
1717a18192021
71618257161835N/A7182175N/A7110015
Operator Body 400Operator Body (Long/EG)Vent Scre Label Long PinT20 Torx (5 x 20mm)Oil Plug
111141
90.00104.00 N/A12.00N/A2.00
22 23293031
227470940653204425N/A 7090010015
Vent Screw (4x6 mm)Gasket (copper)1 Lt. Lobe PumpPump Pin (4x28mm)O-Ring
33113
4.002.00
158.00N/A2.00
MODEL 400 BLOW UP AND PARTS LIST
3233343535a
30602069 707309572203557220365
Washer (Swivel)Swivel Jam Nut (10mm)Swivel Joint squareFront Mounting BracketFront Mounting Bracket (Long E/G)
11111
2.00 4.0069.0026.0029.00
36373838a394040a
N/A 711940570191957019225417001572721057272115
Star Washer (5mm)Protective Cover End Cap PlugTie-Rod (Protective Cover)Tie-Rod (Protective Cover Long/EG)Protective Cover End CapProtective CoverProtective Cover (Long/EG)
2222211
N/A 2.005.007.0013.0052.0063.00
4141a424344**45
390098539009752167+6115+*27077228015+
Skin Pack: 400Skin Pack: 400 EGSeal KitOil: 1 qt.Capacitor 8uF: 220VAluminum Fork Kit
111111
134.00134.0073.0021.008.0056.00
POS PART NO DESCRIPTION QTY LIST PRICE
* 220VAC 8 uF Motor Part Number is 7790205 167.00* 220VAC 16 uF Motor Part Number is 7700045 167.00
** 16uF Capacitor for use with 220VAC Motor. Part #: 2706 8.00** 25uF Capacitor for use with 115VAC Motor. Part #: 2705 16.00
128
POS PART NO DESCRIPTION QTY LIST PRICE
12345
7049005N/A 440406570490054404085
Valve RetainerO-RingInlet ValveRetainer (Brass)Lock Valve (Bi-Metal)
15242
4.00N/A5.004.008.00
677a8910
49943457230295 7230305N/AN/A4180285
Valve Body (CBAC)Tie-Rod (Cylinder)Tie-Rod (Cylinder) (Long/EG)Star Washer (5 mm)O-Ring (Shuttle Piston)Shuttle Piston
144411
217.006.008.00N/AN/A15.00
1111a121313a1415
736602573660157091015435010543501154994625N/A
CylinderCylinder (Long/EG)Piston Rod SealsPiston Rod AssemblyPiston Rod Assembly (Long/EG)Front FlangeFront Flange Bolt (5 x 20 mm)
1121111
59.0065.006.0087.0099.0078.00N/A
161718192021
N/A70903600257090815704900573613354180415
O-Ring Front Flange (Internal)O-Ring (Valve Body)O-Ring (Retract Tube 06’)Guide Ring (Piston)Retract TubeBy-Pass Cap Assembly
122112
N/A3.003.004.0024.0012.00
22232425262728
418041541804157090280015N/A418019541804154404095
By-Pass Cap AssemblyBy-Pass Cap AssemblyO-Ring (Manual Release)Spacer (Manual Release)Manual ReleaseBi-Pass Assembly (06’)Inlet Valve (Bi-Directional)
2211121
12.0012.00 2.004.00
15.0012.0014.00
MODEL 400 BLOW UP AND PARTS LIST
129
POS PART NO DESCRIPTION QTY LIST PRICE
12345
21517290445N/AN/AN/A
Knob Screw (ss) 4mm x 8mmManual Release Knob w/ screwScrew (ss) 4mm x 10mmLocking Cap BaseLock
11311
2.009.00N/AN/AN/A
678910
7090290015N/A713100572752757090855
O-Ring (Lock Cylinder)Top CoverKey (Viro)Cover, KeyO-Ring (Base to Body)
11111
2.00N/A4.003.002.00
1112131415
N/A7090865N/AN/A7090845
Extension ReceptacleO-Ring Extension ReceptacleBy-Pass ExtensionsManual Release ExtensionsO-Ring, Extensions
11213
N/A2.00N/AN/A3.00
161718
4903274903264185045
Extensions with O-RingsManual Release KitLocking Cap Complete
311
26.0031.0039.00
MODEL 400 LOCKING CAP PARTS LIST
130
POS PART NO DESCRIPTION QTY LIST PRICE12345
717148541701063001005N/A7110015
Flange (Rear 08’)Manual ReleaseWiring Harness (08’) Electric CableO-Ring (18x1 mm)Plug (oil fill)
11111
59.0018.0061.00N/A2.00
6789
7109135N/AN/A7090725
Cable support anti-kink (plastic)Screw (3x12 mm)Screw (3x8 mm)O-Ring (Internal Harness)
1111
5.00N/AN/A1.00
MODEL 400 REAR FLANGE PARTS LIST
131
BLOW-UP VIEW, MODEL 402 CBC
132
POS PART NO DESCRIPTION QTY List Price
12345
20367220015728400571820757228015
Galvanized Nut (8mm)Rear BracketRear Bracket PlateShort PinRear Fork (Alum)
11111
3.0031.0016.0011.0033.00
67*8*9*10*
20377109235710923570393052581
Self-Locking Nut (8mm)Strain ReliefStrain Relief NutStrain Relief Brass WasherFiber Washer
11111
3.0017.0017.003.003.00
1112131415
75140557170435709910157450005N/A
Electric Power CordRear FlangeGasket (D80)Operator BodySelf-Threading Screw
11211
37.0058.004.0073.00N/A
1617181920**
711947523652366236777000425
Vibration DampenerMotor Bolt (4mmx50)Lock WasherHex Nut (4mm)115V 1400RPM Motor
21181
3.003.003.003.00167.00
2122232425
7119485N/A7182175N/AN/A
Vibration DampenerVent Screw LabelLong PinSocket Head Screw (5x20mm)Plug (Oil)
21181
3.00N/A12.00N/AN/A
2627282930
227470940653204425N/AN/A
Vent Screw (4x6mm)Gasket (Copper)1 Lt Lobe PumpPump PinBy-Pass Protection Cover
11121
4.002.00
158.00N/AN/A
3132333435
N/A7271545711402572720854304015
Spacers (Protective Cover)Protective Cover End CapProtective Cover PlugProtective CoverFront Mounting Bracket
21111
N/A4.002.0061.0016.00
36373839
7182355N/A7090010015N/A
Pin Front BracketBlack Plastic ScrewO-Ring (3)Stainless Steel Screw (2.9mm x 6.5mm)
1132
4.00N/A2.00N/A
POS PART NO DESCRIPTION QTY List Price
101102103104105
4404065N/A704900541802054180395
Inlet ValveO-RingValve Retainer Black Lock ValveBrass By-Pass Valve
25211
5.00N/A4.004.008.00
106107108109110
41803954180395418039541803957090350025
Brass By-Pass ValveO-Ring (By-Pass Valve)By-Pass SpringBy-Pass SeatO-Ring (Front Flange)
12222
8.008.008.008.003.00
111112113114115
709066573613157230225N/AN/A
O-Ring (Alum Retract Tube)Retract Tube (Alum)Tie-Rod (Cylinder)O-Ring (Front Flange Internal)Star Washer
21414
3.0029.005.00N/AN/A
116117118119120
49941654350065709503573660657271555
Front FlangePiston AssemblyPiston Rod PackingCylinderProtective Cover Guide
11111
60.0091.0016.0066.003.00
121122123124125
N/A418028544040854180355713002
O-Ring (Shuttle PistonShuttle PistonLock ValveManual ReleaseTriangular Release Key
11111
N/A15.008.0015.004.00
126127128129130130
N/A41803554994365704900539052353906145
Galvanized ScrewO-Ring (Manual Release)Valve Body (CBC)Brass RetainerSkin Pack (Double)Skin Pack (Single)
111111
N/A15.00217.004.00
130.0077.00
131132
2168*6115*
Seal Kit1 Qt. Monolec Oil
11
101.0021.00
MODEL 402 CBC PARTS LIST
* 7109235 Included in kit** 77000415 220V Motor - 16 uf capacitor** 7700205 220V Motor - 8 uf capacitor
133
134
135
POS PART NO DESCRIPTION QTY LIST PRICE
113115116117
7090360025709035002570906657361315
O-Ring (Valve Body)O-Ring (Mid-Flange)O-Ring Retract Tube (Long)Retract Tube (Long)
1221
3.003.003.0029.00
118119120121122
7230225N/AN/A49941654350085
Tie-Rod ( Cylinder)O-Ring Front Flange (Internal)Star WasherFront FlangePiston Assembly
41411
5.00N/AN/A60.0085.00
123124125126127
7095035736606572715554994494404085
Piston Rod PackingCylinderProtective Cover GuideMid FlangeLock Valve
11112
16.0066.003.0061.008.00
128129130131132
41802854180285N/AN/A4994345
Shuttle PistonO-Ring (Shuttle Piston)Galvanized WasherGalvanized ScrewValve Body (CBAC)
11441
15.0015.00N/AN/A
21700133134135136
704900539053252172*6115*
Valve RetainerSkin Pack - SingleSeal Kit1 Qt. Monolec Oil
2111
4.00116.00104.0021.00
POS PART NO DESCRIPTION QTY LIST PRICE12345
21517290445N/AN/AN/A
Knob Screw (SS) 4mm x 8mmManual Release KnobScrew (SS) 4mm x 10mmLocking Cap BaseLock
11311
2.009.00N/AN/AN/A
678910
7090290015N/A713100572752757090855
O-Ring (Lock Cylinder)TopKey (Viro)Cover, KeyO-Ring (Base to Body)
11111
2.00N/A4.003.002.00
1112131415
N/A7090865N/AN/A7090845
Extension ReceptacleO-Ring Extension ReceptacleBy-Pass ExtensionsManual Release ExtensionO-Ring, Extensions
11213
N/A2.00N/AN/A3.00
16171819
4903274903264185045490325
Extensions with O-RingsManual Release KitLocking Cap CompleteLocking Cap with Manual Release System
3111
26.00N/A39.0058.00
24 7161815 Operator Body (New) 1 59.00
* 7109235 Included In Kit** 77000415 220V Motor - 16 uf capacitor** 7700205 220V Motor - 8 uf capacitor
POS PART NO DESCRIPTION QTY LIST PRICE12345
20367220015728400571820757228015
Galvanized Nut (8mm)Rear BracketRear Bracket PlateShort PinRear Fork
11111
3.0031.0016.0011.0033.00
678910
203771706857099101570904400157090655
Self-Locking Nut (8 mm)Rear FlangeGasket (D80)O-Ring Locking Cap (Small)O-Ring Locking Cap (Center)
11221
3.0061.004.002.003.00
1112131415
418502157094065227472708057270815
Locking CapGasket (Copper)Vent Screw (4x6 mm)Locking Cap CoverAccess Slide (Locking Cap)
13311
59.002.004.00
17.007.00
1617181920
7131005N/A711947523652366
Viro Key (Manual Release)Self Threading Screw (4mm)Vibration DampenerMotor Bolt (4x50 mm)Lock Washer
11244
4.00N/A3.003.003.00
2122**232425
2367770004257119485309005N/A
Hex Nut (4 mm)115V 1400 RPM MotorVibration DampenerOperator BodyVent Screw Label
41211
3.00167.003.0072.00N/A
2627282930*
71821752274N/A7514052581
Long PinVent Screw (4x6 mm)Socket Head Screw (5x20 mm)Electric Powwer CordFiber Washer
13811
12.004.00N/A37.003.00
31*32*33*3435
7039305710923571092353204425N/A
Strain Relief Brass WasherStrain Relief Nut Strain Relief1 Lt. Lobe PumpPump Pin
11112
3..0017.0017.00158.00N/A
3637383940
N/A4900605727154571140257272125
Spacers (Protective Cover)Swivel JointProtective Cover End CapProtective Cover PlugProtective Cover
21111
N/A42.004.002.0063.00
41424344101
72205154900605N/A70900100157090010015
Front Mounting BracketSwivel Joint KitSelf Threading ScrewO-RingO-Ring
11136
16.0044.00N/A2.002.00
102103104105106
70490054404065418003541800454180035
Valve RetainerInlet ValveRed By-Pass Cap AssemblyGreen By-Pass Cap AssemblyBy-Pass Cap (Red)
22111
4.005.004.004.004.00
107108109110111112
418003541800454180045709028001541801954180195
By-Pass SpringBy-Pass CapBy-Pass Cap (Green)O-Ring Retract Tube (Short)Extrusion RingManual Release
221311
4.004.004.002.0015.0015.00
MODEL 422 PARTS LIST
135
BLOW-UP VIEW, MODEL 750
POS PART NO DESCRIPTION QTY LIST PRICE12345
N/AN/A709104573501557193055
Bolt (10mm x 25mm)Lock WasherPiston RingPiston750 Rack (100 Degree)
22221
N/AN/A10.0037.0096.00
678910
N/A7099195N/A23392481
O-Ring (26.7mm x 1.78mm)Gasket CylinderFBushingBearing ThrustBearing (6006)
22212
N/A4.00N/A85.00107.00
1112131415
71915252550709303573090957039125
PinionSnap RingSeal (Top)Splined CollarDust Cover
11111
169.006.0013.0029.009.00
161718
19
72804457270415N/A
N/A
Cover PlateBox Lid (750 Half Box)Self-Tapping Screw Stainless Steel(3.9mm x 9.5mm)Lock Washer (Stainless Steel)
116
6
3.0061.00N/A
N/A
POS PART NO DESCRIPTION QTY LIST PRICE20212223**24
7223205N/AN/A7366245N/A
Half BoxBolt (8mm 100mm)Lock WasherCylinder (100 Degree)O-Ring (66.4mm x 1.78mm)
241222
35.00N/AN/A65.00N/A
2526272829
7170275724602571100457011075710101002
Flange (Right Side)Zert Fitting (Air Drain) Dust Cover (Zert Fitting)Bolt (8mm x 105mm)Elbow
12282
38.005.002.006.00
24.003031323334
7102025N/A72001657287515701217
Ferrule FittingO-Ring (50.52mm x 1.78mm)Bearing Cup (Bottom)Leveling PlateLeveling Bolt (12mm x 35mm)
21114
3.00N/A32.0073.005.00
3536373839
71702857161745390509152171*6115*
Flange (Left Side)BodySkin PackSeal Kit (750 Drive Unit)Monolec Oil (1 Qt)
11111
38.00180.0032.0077.0021.00
* 7193065 750 Rack 180* 95.00** 7366235 750 Cylinder 180* 73.00
136
BLOW UP, MODEL 750 CBAC
POS PART NO DESCRIPTION QTY LIST PRICE12*345
320443577000425751412570993157450115
Lobe Pump (.75 Lt)115V 1400 RPM MotorElectric Power CordFlange GasketBody (Pump Housing)
11121
158.00167.0049.005.0061.00
678910
N/A709406522747270531N/A
Vent Screw DiagramWasher (7mm x 4mm x 1mm)Vent Screw (4mm x 6mm)Flange (Upper)Lock Washer
11112
N/A2.004.00N/AN/A
1112**13**14**15
N/A2581703930571092357112055
Screw (6mm x 10mm)Fiber WasherWasher (Brass)Nut (Strain Relief)Filler Cap (Dip Stick)
21111
N/A3.003.0017.004.00
1617181920
N/AN/A227423652366
Tie RodStar WasherVent Screw (Ground Screw)Motor Bolt (4mm x 50mm)Lock Washer
44144
N/AN/A4.003.003.00
2122232425262728
2367N/A709001001570900300157290155N/AN/A4180225
Jam NutPin (Pump 4mm x 28mm)O-Ring (Pump 4.48mm x 1.78mm)O-Ring (6.75mm x 1.78mm)Manual Release LeverWasher (4mm x 12mm)Allen Bolt (4mm x 12mm)Manual Release
42211111
3.00N/A2.002.005.00N/AN/A17.00
POS PART NO DESCRIPTION QTY LIST PRICE2930313233
N/A7049005440406544040857102055
O-Ring (10.82mm x 1.78mm)Lock Valve RetainerInlet ValveLock ValveFerrule Fitting
62222
N/A4.005.007.003.00
3435363738
N/A4180395418039541803954180395
Nut (12mm x 1mm)By Pass Cap (Brass)By Pass Cap PlugBy Pass SpringBy Pass Cap (Brass)
21221
N/A8.008.008.008.00
39
404142
N/A
N/A41802857090440015
Self Tapping Screw (2.9mm x 6.5mm)
Screw (5mm x 8mm)Shuttle PistonO-Ring (7.6mm x 1.78mm)
2
211
N/A
N/A15.002.00
4344454647
49944570901500157049005390700390700
Valve BodyO-Ring (9.25mm x 1.78mm)Lock Valve Retainer(Brass)Banjo BoltCopper Washer
12222
182.002.004.0031.0031.00
48495051
71101153907002170*6115*
Gas FittingsBanjo Bolt KitDSeal KitMonolec Oil (1 Qt)
2111
9.0031.0073.0021.00
* All included in kit #7109235 ** 220V 1400 RPM Motor Part #7700205 167.00* 77000415 220V motor - 16ufcapacitor 167.00
137
BLOW-UP VIEW, MODEL 750 ENCLOSURE
POS PART NO DESCRIPTION QTY LIST PRICE
1
234
N/A
N/AN/AN/A
Self Tapping Screw (3.9mm x 9.5mm)
WasherSnap RingO-Ring (15.6mm x 1.78mm)
1
111
N/AN/AN/AN/AN/A
567
8
7128035713002N/A
7309105
Lock Body (Enclosure)Triangular Release KeyGalvanized Self Topping Screw(2.9mm 9.5mm)
Plastic Hinge
11
11
3.004.00N/A4.00
910
1112
720309N/A
N/AN/A
750 EnclosureSelf Tapping Screw(4.8mm x 16.7mm)
WasherNut (Plastic)
1
112
88.00N/AN/AN/AN/A
1314
N/A709974
Plug (Plastic)Gasket (Lid)
21
N/A4.00
MODEL 750 ENCLOSURE PARTS LIST
138
BLOW-UP VIEW, MODEL 760
139
POS PART NO. DESCRIPTION QTY LIST PRICE
12345
70193457011345N/A72012954246385
Mounting Bolt (Bottom)Mounting Bolt (Top)Stainless Steel Screw (Doghouse)Manual Release HousingManual Release Rod
22411
16.006.00N/A12.0035.00
678910
N/AN/AN/A41802957099595
Snap RingManual Release Rod EndRetaining PinManual releaseGasket (Manifold)
11111
N/AN/AN/A19.0019.00
1112131415
N/A49976270392857110115N/A
Parallel PinManifoldCopper WasherBanjo BoltLock Washer
21225
N/A145.003.009.00N/A
1617181920
N/A7090150015418026570900100157011355
Allen Head BoltO-Ring (With Part No. 18)Brass By-Pass Cap (Break)O-RingFlange Bolt Stainless Steel
32238
N/A2.0019.002.009.00
2122232425
N/AN/AN/A4997607361365
Lock WasherJack Counter Nut Brass Jam NutSnap RingFlange (Manifold Side)Retract Tube
82211
N/AN/AN/A
393.0021.00
2627282930
N/AN/A4404085N/A7090490025
Allen Head ScrewO-Ring (With Part No. 28)Lock ValveSnap RingO-Ring (Flange)
24222
N/AN/A8.00N/A3.00
MODEL 760 PARTS LIST
POS PART NO. DESCRIPTION QTY LIST PRICE
3132333435
736613570995857350275N/A7246025
CylinderGasket (Cylinder)Ramping PistonO-Ring (Ramping Piston)Air Drain Valve
22222
95.005.0036.00N/A5.00
3637383940
7110045N/AN/AN/A7094115
Debris CoverO-Ring (Manual Release)Allen Head Bolt (Piston)Lock WasherRPiston (Red Internal)
21222
2.00N/AN/AN/A12.00
4142434445
7092025735027570491957119485N/A
Piston SealPistonPiston Seal (Inner)Vibration DampenerLock Washer (Coated)
22224
14.0036.0022.003.00N/A
4647484950
709038002571932057160505499761N/A
O-Ring (Rack)RackRam BodyFlange (Non-Manifold)Allen Head Screw
21112
3.00116.00107.00376.00N/A
5152535455
72242157099575N/AN/A7090665
Bracket (Pump to Drive)Gasket (Drive to Box)Self Tapping ScrewRack Protecting CoverO-Ring (Retracting Tube)
11212
6.008.00N/AN/A3.00
565758
39055152176*6115*
Skin Pack (Mounting Hardware)Seal Kit1 Qt. Monolec Oil
111
83.00167.0021.00
140
BLOW-UP, MODEL 760 CBAC
POS PART NO DESCRIPTION QTY LIST PRICE
12**345
320443577000425751412570993157450115
Lobe Pump75 lt.115v 1400 RPM MotorElectric Power CordFlange GasketBody (Pump Housing)
11121
155.00164.0048.005.0060.00
67*8*9*10
7276025258170393057109235N/A
Flange (Upper)Fiber WasherStrain Relief Brass WasherStrain Relief NutFiller Cap
11111
31.003.003.0017.00N/A
1112131415
7230385N/A227423652366
Tie Rod Pump (760)Star Washer Stainless SteelVent Screw (4mm x 8mm)Motor Bolt (4mm x 50mm)Lock Washer (4mm)
44144
9.00N/A4.003.003.00
161718
2367N/A7090010015
Hex Nut (4mm)Pump Pin (4mm x 28mm)O-Ring
422
3.00N/A2.00
POS PART NO DESCRIPTION QTY LIST PRICE
1920212223
N/A4404065N/A44040854180395
O-RingInlet ValveValve RetainerLock ValveGreen By-Pass Cap
62221
N/A5.00N/A8.008.00
2425262728
418039541803954180395N/A4994075
Red By-Pass CapBy-Pass CapBy-Pass SpringO-Ring (By-Pass Cap)Valve Body
12221
8.008.008.00N/A
155.002930313233
N/A418028570490052170*6115*
O-Ring (Shuttle Piston)Shuttle PistonValve Retainer (Brass)Seal Kit1 Qt Monolec Oil
11211
N/A15.004.0072.0021.00
* 7109235 Included in Kit 17.00* 77000415 220V Motor 16 uf Capacitor 164.00* 7700205 220V Motor 8 uf Capacitor 164.00
141
BLOW UP, MODEL 760 LOAD BEARING BOX
POS PART NO DESCRIPTION QTY LIST PRICE
12345
72760057309095703912570930352550
Load Bearing Box CoverSplined CollarDust CoverSeal (Top)Snap Ring
11121
121.0029.009.0013.006.00
67*8910
2481719193266372690652339
Seal BearingRam PinionSeal Bearing (Lower)Bearing SpacerBearing Thrust
21111
107.00139.0067.004.0085.00
1112131415
N/A4900987280885N/AN/A
Bearing Extraction WasherLoad Bearing BoxMounting BarPinion CoverGalvanized Screw
11214
N/A465.0037.00N/AN/A
16
17
7099575
2070
Gasket (Drive Unit to Load Bearing Box)
Stainless Steel Screw (6 x 10mm)
1
7
8.00
3.00
* 7192475 Pinion ‘05 New Style... 137.00
142
143
144
145
146
147
148
149
150 148
LIT-PROLINE-1/18/07
Limited Warranty
To the original purchaser only: FAAC International, Inc., warrants for the time period indicated in each product’s description (or product title page) from the date ofinvoice, the gate operator systems and other related systems and equipment manufactured by FAAC S.p.A. and distributed by FAAC International, Inc., to be freefrom defects in material and workmanship under normal use and service for which it was intended provided it has been properly installed and operated. FAACInternational, Inc.’s obligations under this warranty shall be limited to the repair or exchange of any part or parts manufactured by FAAC S.p.A. and distributed byFAAC International, Inc. Defective products must be returned to FAAC International, Inc., freight prepaid by purchaser, within the warranty period. Items returned willbe repaired or replaced, at FAAC International, Inc.’s option, upon an examination of the product by FAAC International, Inc., which discloses, to the satisfaction ofFAAC International, Inc., that the item is defective. FAAC International, Inc. will return the warranted item freight prepaid. The products manufactured by FAAC S.p.A.and distributed by FAAC International, Inc., are not warranted to meet the specific requirements, if any, of safety codes of any particular state, municipality, or otherjurisdiction, and neither FAAC S.p.A. nor FAAC International, Inc., assumes any risk or liability whatsoever resulting from the use thereof, whether used singly or incombination with other machines or apparatus.
Any products and parts not manufactured by FAAC S.p.A. and distributed by FAAC International, Inc., will carry only the warranty, if any, of the manufacturer. Thiswarranty shall not apply to any products or parts thereof which have been repaired or altered, without FAAC International, Inc.’s written consent, outside of FAACInternational, Inc.’s workshop or altered in any way so as, in the judgment of FAAC International, Inc. , to affect adversely the stability or reliability of the product(s) orhas been subject of misuse, negligence, or accident, or has not been operated in accordance with FAAC International, Inc.’s or FAAC S.p.A.’s instructions or has beenoperated under conditions more severe than, or otherwise exceeding, those set forth in the specifications for such product(s). Neither FAAC S.p.A. nor FAACInternational, Inc., shall be liable for any loss or damage whatsoever resulting, directly or indirectly, from the use or loss of use of the product(s). Without limiting theforegoing, this exclusion from liability embraces a purchaser’s expenses for downtime or for making up downtime, damages for which the purchaser may be liable toother persons, damage to property, and injury to or death of any persons. Neither FAAC S.p.A. nor FAAC International, Inc., assumes nor authorizes any person toassume for them any other liability in connection with the sale or use of the products of FAAC S.p.A. or FAAC International, Inc. The warranty hereinabove set forthshall not be deemed to cover maintenance parts, including, but not limited to hydraulic oil, filters, or the like. No agreement to replace or repair shall constitute anadmission by FAAC S.p.A. or FAAC International, Inc., of any legal responsibility to effect such replacement to make such repair, or otherwise. This limited warrantyextends only to wholesale customers who buy directly through FAAC International, Inc.’s normal distribution channels. FAAC International, Inc., does not warrant itsproducts to end consumers. Consumers must inquire from their selling dealer as to the nature and extent of that dealer’s warranty, if any.
This warranty is expressly in lieu of all other warranties expressed or implied including the warranties of merchantability and fitness for use. This warranty shall notapply to products or any part thereof which have been subject to accident, negligence, alteration, abuse, or misuse or if damage was due to improper installation oruse of improper power source, or if damage was caused by fire, flood, lightning, electrical power surge, explosion, wind storm, hail, aircraft or vehicles, vandalism, riotor civil commotion, or acts of God.
Terms of Sale
Important NoticePrices shown in this list are based on the availability of items when the price list was printed. Prices are subject to change without notice. A minimum billing charge of$25.00 net plus shipping cost will be billed for all orders received. Whenever possible, we suggest that you combine orders for all parts to surpass the minimum cost.Product delivery time is subject to product availability. We are not responsible for any damages caused by a delay in shipping or product availability.
PricingAll quoted prices for products are discounted according to the list price provided in our most current pricing manual. Discounts quoted do not apply to special orderitems. Contact the factory for Dealer/Distributor pricing on special orders.
Credit TermsWe are pleased to offer one of the most generous discount terms available in the industry.
Our credit terms are net 30 days. Credit terms apply only to open accounts in good standing and only to merchandise. Balances remaining unpaid after the 30th dayare subject to a 1.75% per month finance charge. This is an annual cost to you of 21%. We compute the finance charge by applying the 1.75% rate to the amount ofthe invoice past due for every month it is past due. The balance of your account is determined by taking the balance you owed at the end of the previous billing cycleand subtracting all payments and credits received during the current billing cycle. Accounts past due forty-five (45) days will be placed on credit hold until the accountis brought up-to-date. Accounts over sixty (60) days past due that have no payment arrangements will be considered delinquent and subject to collection remedies.The dealer/distributor will be responsible for all collection expenses. A current signed credit application must be provided before an account is opened, subject to credit approval.
DeliveryAll prices are quoted F.O.B. our factory. The purchaser is obligated to submit claims for damages or shortages of freight directly to the freight carrier within 30 dayswhen due to carrier neglect.
Material Returned for Credit or RepairGoods may be returned for credit or exchange under certain conditions. You must contact the factory for instructions and an authorization number. Merchandise returned for credit must be current models, unused, and uninstalled - in new condition. Freight must be prepaid on all authorized returns to FAAC International, Inc. The repair or replacement of product and parts is subject to availability, and repair time is not guaranteed. We may have loaner operators available,and they are subject to rental charges. All damages to loaner operators are the responsibility of the Dealer/Distributor. Repaired or replaced parts carry a 90-day warranty. A 15% restocking charge will be applied to goods returned for credit. Goods returned for repair will be handled immediately when the following conditions exist:
1. Name and address of sender are enclosed with material.
2. The authorization number is clearly visible on the exterior of each package returned.
3. A brief description of the problem and the requested repair is included with the shipment.
We will not be responsible for poorly packaged equipment. Shipments of 70 lb or less should beshipped via United Parcel Service.
FAAC International, Inc.
303 Lexington Avenue
Cheyenne, WY 82007
1-800-221-8278
Fax: (307) 632-8148
www.faacusa.com
Revised: 3-24-09