creative grids non-slip ruler diamond wedding …...01.22.15 the original non-sliprulercreative...
TRANSCRIPT
Illustration 1Quilt Block Layout
Illustration 2Row 1. Press seams down.
Row 2. Press seams up.
Row 3. Press seams down.
Row 4. Press seams up.
Illustration 3Join Row 1 & Row 2. Press seam towards Row 1.
Join Row 3 & Row 4. Press seam towards Row 4.
Illustration 4Join Row 3 and Row 4.
The stitches are picked
back on each inter-
secting seam in the
center star. The seams
are tweaked and then
pressed in the oppos-
ing directions
The Original NON-SLIPRulercreative grids®
The Original NON-SLIPRulercreative grids®
NON-SLIP
Diamond Wedding Ring Templates
Use these templates to cut the segments needed to create Diamond
Wedding Ring blocks. They work beautifully along with Quiltworx
paper-piecing patterns and the Creative Grids® 60° Ruler (CGRT60).
Designed by: Judy Niemeyer
Creative Grids is covered by U.S. Trademark Registration No. 2,796,615
Creative Grids® USA, Inc400 W. Dussel Dr. Ste B
Maumee, OH 43537www.creativegridsUSA.com
Creative Grids® UK, Ltd.Unit 23A Pate Road
Leicester Road Industrial EstateMelton Mowbray
Leicestershire, LE13 0RG England
www.creativegrids.com
#CGRDIAMade in USA
SEE A DEMOSCAN WITH ANY QR READER
CGRDIA
7 4 3 2 8 5 0 0 1 8 6 6
DiamondWedding RingTemplate B-1
CGRDIA
Designed by
Judy Niemeyer
Diamond Wedding Ring
Template L
CGRDIA
CGRDIA
Designed by
Judy Niemeyer
Diamond Wedding RingTemplate E
Designed by
Judy Niemeyer
Diamond Wedding Ring
Template R
CGRDIA
Diamond Wedding Ring
Template D CGRDIA
Diamond Wedding Ring
Template C
CGRDIA
01.22.15
The Original NON-SLIPRulercreative grids®
NON-SLIP
Diamond Wedding Ring TemplatesFinished Size: 8" 600 Diamond Wedding Ring Unit.
Background Fabric: Fabric #2: 3/8 Yard1. Cut and stack (2) 5½" by 42" strips. Position the templates as shown and cut (12)
trapezoids fi tting around the shape of the three templates.
2. Re-stack (2) Groups of (6) pieces and cut
(12) pieces with each template.
Accent Fabric: Fabric #3: ½ Yard3. Cut and Stack (4) 4½" by 42" Strips. Position the templates as shown.
Cut (12) pieces with each template.
Accent Fabric: Fabric #4: ¹/8 Yard1. Cut (1) 4½" by 42" Strip. Crosscut (6) 4½" by 5" Rectangles. Re-stack (6) 4½" by 5"
Rectangles. Position the templates as shown. Cut (12) pieces with each template.
Background Fabric: Fabric #1: ½ Yard1. Cut and stack (2) 8½" by 42" Strips. Crosscut the strips into (12)
8½" 600 triangles using the CGRT60.
Fig 1. Template L to Template E. Press towards Template L.
Fig 2. Template R to Template E. Press towards Template R.
Fig 3. Template D to Template L. Press towards Template D.
Fig 4. Template C to Template R. Press towards Template C.
Fig 5. Template B1 to Template L. Press towards Template B1.
Fig 6. Template B1 to Template R. Press towards Template B1.
Fig 7. Template D to Template L. Press towards Template D.
Fig 8. Template C to Template R. Press towards Template C.
Fig 9. Template L to Template E. Press towards Template L.
Fig 10. Template R to Template E. Press towards Template R.
60°60°
30°
60° Equilateral TriangleDesigned by Rachel CrossCGRT60
60° 60°
30°
60° Equilateral TriangleDesigned by Rachel Cross CGRT60
DiamondWedding RingTemplate B-1
CGRDIA
Designed by
Judy Niemeyer
Diamond Wedding Ring
Template L
CGRDIA
CGRDIA
Designed by
Judy Niemeyer
Diamond Wedding RingTemplate E
Designed by
Judy Niemeyer
Diamond Wedding Ring
Template R
CGRDIA
Diamond Wedding Ring
Template D CGRDIA
Diamond Wedding Ring
Template C
CGRDIA
60°60°
30°
60° Equilateral TriangleDesigned by Rachel CrossCGRT60
D C
L R
E E
D C
L R
E EFig. 1 Fig. 2
Fig. 3 Fig. 4
D C
L R
B-1 B-1Fig. 5 Fig. 6
D C
L R
B-1 B-1Fig. 7 Fig. 8
TempD C
L R
E E
D C
L R
B-1 B-1
DC
LR
B-1B-1
D C
L R
E E
DC
LR
B-1B-1
D C
L R
E EFig. 10
Fig. 9