contractor pre qualification questionnaire … document/pre... · contractor pre qualification...

CONTRACTOR

PRE QUALIFICATION

QUESTIONNAIRE

ABU DHABI GAS LIQUEFACTION COMPANY LIMITED

Issued by: Support & Logistics Services Dept. Procurement & Contracts Division Issue Date: Oct/2012

http://www.adgas.com/EnglishView/index.cfm

ADGAS

PRE-QUALIFICATION QUESTIONNAIRE FOR CONTRACTORS

Page: 2/49

Pages

Contractor’s Name…………………………………………………………………….….. ... 3

Guidelines………………………………………………………..……………………..……… 4

Check List………………………..…………………………………………………………..… 5 - 6

Section 1 General Information........................................................... 7

1.1. Company Information…………………………………………………… 8

1.2. Ownership, Authorised Person(s)……………………………………… 9

1.3. Certificates and Licenses……………….……………………………….. 10

1.4. Associated Companies... ... ... ... ... ... ... ... ... ... ... ... ... ... ... … 10

1.5. Financial Information…………………………………………………… . 11

Section 2 Work Experience ................................................................. 12

2.0 PRE-QUALIFIED WITH ADNOC GROUP OF COMPANIES……….. 13

- Guidelines for Completing Section 2……………………………... ... 14

2.1 Work Categories ... ... ... ... ... ... ... ………………………………… . 15

2.2 List of Experience for the last 5 Years ... ... ... ... ... ... ... ... ... ... 16

2.3 Licensor Position …………………………………………………………. 17

Section 3 Company Resources .......................................................... 18

3.1 Plant and Equipment …………………………………………………... 19

3.2 Technical Resources ……………………………………………….…... 20

Section 4 Orgainization and Quality Assurance ................................. 21

4.1 Organization & Human Resources……………………..…………... 22

4.2 Infrastructure…………………………………………………………….. 23

4.3 Quality Assurance Accreditions………………………………….... . 24-25

Section 5 Company Declaration……………………………………………….... 26-27

Guidelines...................................................................................................... 29

INDEX

PRE-QUALIFICATION QUESTIONNAIRE

WORK CATEGORIES

ADGAS


Page: 3/49

Contents.......................................................................................................... 30-31

Work Category Descriptions............................................................................ 32

C O N T R A C T O R ' S N A M E

ADGAS


Page: 4/49

This document is considered by the Company to be a very important one for

evaluating suitability of an organization as a prospective Contractor. Hence you are requested to follow these guidelines for completing the Questionnaire:

1. Additional guidelines have been provided at the beginning of Section (2). A check list is also provided on the next page for you to ensure completeness of submittal.

2. The term “Contractor” used in this document denotes both contractors and Consultants.

3. All information shall preferably be typewritten and should be supported with

appropriate documentation. This information is required to be updated by you

every two to three years by submitting a fresh Pre-qualification Questionnaire. 4. Please attach additional sheets if the space provided for any information is

insufficient. Write your Company’s ‘Short’ Name on each additional sheet, marking it with a reference number which should be entered in the Check List.

5. Every year copies of all renewed licenses and certificates (as per Sub-Section

1.3) must be submitted, without which your registration shall stand

automatically cancelled.

6. All correspondence shall be addressed: Mr. Sultan Ebrahim A. Al-Neaimi Head of Support & Logistics Services Department

ADGAS Head Office – 12th Floor Corniche Road ABU DHABI – U.A.E.

7. In case of difficulty in filling up the Questionnaire, please contact:

Vendor Registration Officers:

Tel: +9712-6065882 or +9712-6065959 Logistics & Support Service Department Office Administrator:

Tel: +9712-6065708, Fax: +9712-6061201

Senior Support Engineer

Tel: +9712-6065618

GUIDELINES

ADGAS


Page: 5/49

8. There are 5 Sections to this Questionnaire, as under:

Section 1 : General Information Section 2 : Work Experience Section 3 : Company Resources

Section 4 : Organization & Quality Assurance Section 5 : Company Declaration

Important Notes

1. The completed documents are to be hand delivered to Registration Officer in

ADGAS Headquarters, 12th floor, who will check the documents and receive

the same.

2. Prequalification documents sent through mail will not be accepted

3. Suppliers and Contractors to ensure that the documents are complete in all

respects as mentioned in the website.

4. Incomplete submissions will be rejected, and ADGAS will not be responsible

for such incomplete submissions.

Documents submission time is from 09.00 to 12.00 hrs on all Mondays

and Wednesdays.

ADGAS


Page: 6/49

SL. NO. DESCRIPTION

VENDORS CONFIRMATIO

N

COMPULSORY ATTACHMENTS

1. Covering letter from Local Contractor along with copy of their:

Department of Economic Development Trade License

Abu Dhabi Chamber of Commerce & Industry (ADCC&I) Membership Registration Certificate.

(Above Certificates must contain classification for Oil & Gas Field Services

with minimum of 3 months validity).

“To whom It May Concern Certificate” from ADCC&I stating % of ownership.

Note: Attach copy of above License/Certificates and their official English Translation.

2. Copy of financial statement audited by charted accountants for last 3 years. Or internal financial statement if the company is established for less than one year.

3. Worldwide & local experiences list including Name of Client, Scope of Work, Value and Year of Project along with the related final Acceptance/Provisional Acceptance Certificates as applicable for the experiences entered within the Contractor’s screen (copies of contract to be attached).

4. Company Profile outlining key areas (1 or 2 pages).

5. List of personnel under your company's visa issued by Ministry of Labour of UAE Government, Abu Dhabi,

6. Organization Chart along with CVs for the technical manpower with 5 years minimum experience.

7. Declaration templates and other provided templates to be filled up and attached as applicable.

8. Letters of approval from major international oil & gas producers.

9. Copy of QA/QC manual along with implementation forms, checklists & certificates applicable to QA/QC Management system.

10. Copy of HSE manual along with implementation forms checklists & certificates.

11. Contractor Classification from Planning Department, Abu Dhabi.

12. Copy of ISO 9001 certification from an international certifying agency.

13. Company catalogues/brochures, if any.

14. Banker’s reference letter(s).

15. Customer reference letters.

16. Any other documents which you may wish to enclose in support of this prequalification (Please list below): ---------------------------------------------------

17 Hard and softcopy of your pre qualification submission

18 Confirm that all Sections/Sub-sections applicable to you have been filled and evidence attached in the submission.

Notes : - Item Nos. 1 to 7 are compulsory for Contractors.

- Item Nos. 8 to 13 are compulsory for Contractors, if applicable to the nature of work. - Item No. 14 to 16 optional.

- The pre-qualification submission (dossier/softcopy) shall have all above compulsory attachments arranged in serial order, with dividers/folders.

AUTHORISED SIGNATURES

CHECK LIST

ADGAS


Page: 7/49

SECTION 1

GENERAL INFORMATION

1.1 COMPANY INFORMATION

1.2 OWNERSHIP, AUTHORIZED PERSON(S)

1.3 CERTIFICATES AND LICENSES

1.4 ASSOCIATED COMPANIES

1.5 FINANCIAL INFORMATION

ADGAS


Page: 8/49

SECTION 1

PAGE 1 OF 4

FULL NAME

SHORT NAME (IF ANY)

DATE ESTABLISHED

NATIONALITY

INCORPORATED IN

ABU DHBAI OTHER EMIRATE WITHIN U.A.E

AGCC COUNTRY OTHER COUNTRY (AGCC = Arab Gulf Cooperation Council)

ADDRESS

MAIN OFFICE

IN ABU DHABI

STREET

P.O. BOX

TEL. NO.

FAX NO. E-MAIL:

CORPORATE

HEADQUARTERS

STREET

P.O. BOX

TEL. NO.

FAX NO. E-MAIL:

OTHER ADDRESSES STREET

P.O. BOX

TEL. NO.

FAX NO. E-MAIL:

HOME OFFICE (ONLY FOR

CONSULTANTS/

ENGINEERS)

STREET

P.O.BOX

TEL. NO.

FAX NO. E-MAIL:

CONTACT PERSONS: (Please include name of Chief Executive of the Company)

NAME DESIGNATION TEL. NO. FAX NO. E-MAIL

SECTION 1 – GENERAL INFORMATION

SUB SECTION 1.1 – COMPANY INFORMATION

ADGAS


Page: 9/49

SECTION 1

PAGE 2 OF 4

(A) LOCAL COMPANY 100% OWNED BY U.A.E.NATIONAL 51% OWNED BY U.A.E. NATIONAL

NAME OF OWNER(S) NATIONALITY % OF OWNERSHIP

(B) FOREIGN COMPANY

Is it a Branch in Abu Dhabi?

If yes, provide the composition of Board of Directors of Parent Company:

NAME POSITION NATIONALITY

Or, is it a Sponsored Company in Abu Dhabi?

If Yes, please provide details of your Company’s Sponsor in Abu Dhabi:

NAME(S) OF SPONSOR(S) ADDRESS TEL.NO. FAX NO. E-MAIL

(C) AUTHORISED SIGNATORIES AS PER STATUTES/ARTICLES OF ASSOCIATION

NAME(S) DESIGNATION SPECIMEN SIGNATURE

SUB SECTION 1.2 – OWNERSHIP, AUTHORIZED PERSON(S)

No Yes

Yes No

ADGAS


Page: 10/49

SECTION 1

PAGE 3 OF 4

(Please attach copies of Certificates/Licenses and their English Translation)

Classified for Oil & Gas Field Services? (The above classification is necessary for registration as a ‘contractor’)

Trade License from Department of Economic Development

Registration No. Date Of Registration Registration Expiry Date

Membership from Abu Dhabi Chamber Of Commerce & Industry

Registration No. Date of Registration Registration Expiry Date

Industrial license(s) issued from U.A.E. Authorities, if any

Issuing Authority Registration No. Date of Registration Registration Expiry Date

Company classification with Planning Department, Abu Dhabi, If available

Classified For Category of Classification Date Issued

Name of Company Address Type of Association* For ADGAS use only

*Type of Association:

W Wholly-Owned Subsidiary Co.

P Partially Owned Subsidiary Co.

I Independent Co., but under same Management

SUB SECTION 1.3 – CERTIFICATES AND LICENSES

No Yes

SUB SECTION 1.4 – ASSOCIATED COMPANIES

ADGAS


Page: 11/49

SECTION 1

PAGE 4 OF 4

(All figures in Thousand Dirhams)

FULL NAME OF COMPANY

BALANCE SHEET INFORMATION (FOR THE LAST 3 YEARS) TURNOVER (FOR LAST 3 YEAR)

YEAR YEAR GROSS INCOME

NET INCOME

FIXED ASSETS

CURRENT ASSETS

CURRENT LIABILITIES

PAID UP CAPITAL

LONG TERM LIABILITIES

COMPANY’S AUDITORS

NAME ADDRESS

COMPANY’S BANKERS

Provide Main Banker’s Name, Address & Credit Facilities

BANK/INSTITUTION NAME

ADDRESS CREDIT FACILITIES

AMOUNT DETAILS/CONDITIONS

SUB SECTION 1.5 – FINANCIAL INFORMATION

ADGAS


Page: 12/49

SECTION 2

WORK EXPERIENCE

2.0 PRE-QUALIFIED WITH ADNOC GROUP OF COMPANIES

2.1 WORK GROUPS

2.2 WORK EXPERIENCE

2.3 LICENSOR POSITION

ADGAS


Page: 13/49

If your company is pre-qualified with any of ADNOC group of companies, please fill the following

information and provide supporting documents including the capability certificates:

S. NO.

ADNOC COMPANY

NAME

REGISTRATION NO.

DETAILS OF / SERVICES PREQUALIFIED

SECTION 2

PAGE 1 OF 5

SECTION 2 – EXPERIENCES

SUB SECTION 2.0 – PRE-QUALIFIED WITH ADNOC GROUP OF COMPANIES

ADGAS


Page: 14/49

SECTION 2

PAGE 2 OF 5

The guidelines given below should be strictly followed in order to capture the information about your

Company’s and it’s Associates’ experiences:

1. A list of Work Categories covering current areas of ADGAS’ interest is provided at the end of this

Questionnaire. Please select those Work Categories which are relevant to your Company and

provide your work experiences for the selected Work Category(s).

Note: You may also include a specialized service offered by you which is not covered in the list but, in your opinion, may be of interest to ADGAS.

2. List the Work Categories selected as per item (1) above, in sub-section 2.1.

3. Record each of your work experiences in a separate form. A specimen form is provided in Sub-section 2.2. Use photocopies of this form and give these copies serial numbers which should be

entered in the column provided in Sub-section 2.1 in order to link your supporting experiences to

the relevant Work Category(s). You may fill both your “completed” as well as “current ongoing”

contracts in separate forms.

4. First record the jobs directly handled by your company. You may also record a few very important jobs handled through your Associated Companies. In such a case, in the column “Name of

Contractor” in the Work Experience form, please write the name of you Associate Company instead

of your Company’s name.

5. You may record as many Work Experiences as you desire to support your application. However 4 or 5 most recent and major contracts for each ‘Work Category’, preferably from Oil & Gas Industry,

will be considered the minimum requirement. Jobs with ADGAS/ADNOC Group of companies

followed by those undertaken in Abu Dhabi/U.A.E. should be priority listed.

6. The description of Work Experience must identify the key areas of the work executed by your

Company and extent of your direct involvement such as:

Turnkey Projects including Engineering Design, Supply, Erection and Supervision.

Maintenance/Installation/Commissioning works including Supply of Manpower.

Consultancy Services, i.e. Engineering Design, Study and Reports

Or, Construction work only.

7. Under ‘Contract Value’, specify the value of works executed directly by your Company including

your sub-contractors.

8. Sub-section 2.3 to be completed only if your Company is a process licensor.

GUIDELINES FOR COMPLETING SECTON 2

SECTON 2 – WORK EXPERIENCE

ADGAS


Page: 15/49

SECTION 2

PAGE 3 OF 5

Please record below the Work Categories relevant to your Company’s operations as selected from a List

provided at the end of this Questionnaire:

S. NO. WORK CATEGORY NO. NAME OF WORK CATEGORIES WORK

EXPERIENCE FORM NO.

Record any other specialized services offered, which are not included in the above List:

S.NO. SERVICES OFFERED REMARKS, IF ANY

SUB SECTON 2.1 – WORK CATEGORIES

ADGAS


Page: 16/49

CONTRACTOR'S NAME :

CONTRACTOR REGISTRATION NO.

WORK CATEGORY (WC) DESCRIPTION

WORK CATEGORY CODE

S.

NO. 1

PROJECT TITLE

2

CLIENT

3

SCOPE OF WORK

4

ROLE IN PROJECT

5

YEAR

6

TOTAL JOB

VALUE (DHS) 7

VALUE FOR

THIS WC (DHS) 8

Column No. 8 - This value should reflect the relevant portion of the total job which relates directly to the concerned work Category/Service for which this from is being filled, e.g.,

if your total job value is Dhs.1 Million and out of this the relevant Work Category/Service is only Dhs.50,000 then write Dhs.50,000 in this column.

Note: Please include ongoing jobs on a separate copy of this form.

Provide relevant document (copies of Work order/ Service Order or Completion Certificate or Experience certificate) for each category.

PROCUREMENT DIVISION SUPPORT SERVICES DEPARTMENT - REGISTRATION

LIST OF EXPERIENCE FOR THE LAST 5 YEARS

SECTION 2

PAGE 4 OF 5 SUBSECTION 2.2 - WORK EXPERIENCE

ADGAS


Page: 17/49

SECTION 2

PAGE 5 OF 5

Please list processes relevant to the Hydrocarbon/Petrochemical/General Chemical/Process Industry

for which your organization holds proprietary rights available to ADGAS under a licensing arrangement:

PROCESS (NAME) PURPOSE NO. OF UNITS

ON STREAM

TYPICAL

CAPACITY

SUB SECTION 2.3 – LICENSOR POSITION

ADGAS


Page: 18/49

SECTION 3

COMPANY RESOURCES

3.1 PLANT AND EQUIPMENT

3.2 TECHNICAL RESOURCES

ADGAS


Page: 19/49

SECTION 3

PAGE 1 OF 2

Summarize your fixed/mobile Plant and Equipment in U.A.E. which are in good working order and

provide a similar list for Plant and Equipment outside U.A.E., as a separate attachment.

S. NO.

PLANT/EQUIPMENT AND ITS MANUFACTURER/

MAKE QTY. CAPACITY

YEAR OF

MFR. LOCATION

OWNED/HIRED

REMARKS

SUB SECTION 3.1 – PLANT AND EQUIPMENT

SECTON 3 – COMPANY RESOURCES

ADGAS


Page: 20/49

SECTION 3

PAGE 2 OF 2

(A) Please provide a brief write-up on how planning, Procurement, Construction and Management of

client projects are handled, emphasizing on Procurement, Manpower Planning and its deployment, Project Monitoring & Control, Quality Control and Safety aspects.

NOTES:

1. To be provided by Companies seeking prequalification for Project Engineering, Project

Management and similar jobs/services.

2. Please use separate sheets and confirm by ticking the box, if attached.

(B) BACK-UP SERVICES: Please summarize all back-up services you have, to support your prime

business.

ENGINEERING & DESIGN WORKSHOPS & FABRICATION TESTING, COMMISSIONING &

OTHER SPECIALIZED

SERVICES

SUB SECTION 3.2 – TECHNICAL RESOURCES

ADGAS


Page: 21/49

SECTION 4

ORGANIZATION AND QUALITY ASSURANCE

4.1 ORGANIZATION & HUMAN RESOURCES

4.2 INFRASTRUCTURE

4.3 QUALITY ASSURANCE ACCREDITIONS

ADGAS


Page: 22/49

SECTION 4

PAGE 1 OF 4

List below, by category of specialization, the number of personnel employed, indicating whether they represent core “permanent” employees or “hired” ones:

Please attach list of your manpower under yours company’s visa issued by Ministry of Labour of UAE

Government, Abu Dhabi.

Permanent : Under your Abu Dhabi company’s visa Hired : Not under your Abu Dhabi company’s visa Abu Dhabi.

CATEGORY OF SPECIALIZATION TOTAL NUMBER

PERMANENT HIRED UAE Notional* Others

Architects

Chemical Engineers

Civil Engineers and Supervisors

Coded Welders (for Pressure Welding)

Commissioning Engineers

Contract/Project Management

Design/Drawing Personnel

Electrical Engineers

Estimating Engineers

Instrument Engineers

Machinery Engineers

Mechanical Engineers

Metallurgists

Production/Control Engineers

Purchasing Personnel

QA/Inspection and Test Personnel

Research & Development Personnel

Safety Personnel

Sales Personnel

Valves & Piping Engineers

Welding Engineers

Process Safety Engineer

Static Equipment Engineer

Sub-Sea Pipeline Engineer

Others (Please Specify)

* Please provide evidence documents issued or endorsed by the UAE Governmental Authority for

all UAE nationals permanently employed by your company.

SECTION 4 – ORGANIZATION AND QUALITY ASSURANCE

SUB SECTION 4.1 – ORGANIZATION & HUMAN RESOURCES

ADGAS


Page: 23/49

SECTION 4

PAGE 2 OF 4

Please enclose the following Organization Charts:

Organization Chart for your Local Office in Abu Dhabi

Organization Chart for your Corporate Office

Organization Chart for your Home Office (if different from your Corporate Office)

Please enclose the following document and tick the box to confirm:

(i) SPACE (Please specify the space occupied, in square metres)

Offices Warehouses Workshops/Plants

Showrooms Laboratories Others……

(ii) COMPUTERS/OFFICE AUTOMATION (Please specify the Facilities available)

No. of Computers No. of other Hardware such as Printers/Plotters, etc.

Do you use AUTOCAD or similar program?

Please list application software used/available with you including the ones for Project Planning/Control

functions and for Engineering Design:

_____________________________________________________________________________________________________

_____________________________________________________________________________________________________

____________________________________________________________________________________

Please describe very briefly, communication network(s)/facilities available, such as Modems, Electronic

Mail, Telefax, etc.:

____________________________________________________________________________________

____________________________________________________________________________________

____________________________________________________________________________________

____________________________________________________________________________________

SUB SECTION 4.1 – ORGANIZATION & HUMAN RESOURCES (Cont.)

No Yes

SUB SECTION 4.2 – INFRASTRUCTURE

No Yes

No Yes

No Yes

ADGAS


Page: 24/49

SECTION 4

PAGE 3 OF 4

Please tick the appropriate box and provide required information:

1. Do you have a formally documented Quality System?

2. Do you have a QA Manual?

If yes, specify National/International Standard to which

It is developed.

3. Does your QA System meet the requirements of ISO 9000

Series/Bs 5750 (All Parts)/other internationally recognized

QA System?

If yes, please specify which parts, and what system.

4. Is your QA System approved by any inspection/certifying agency

Or by any large well-known company, viz. Lloyds, TUV, etc. or a

Major Oil Company?

If yes, specify which ones.

5. Do you have HSE Manual? Do your company documents &

Implement HSE System?

Does your HSE System meet the requirement of ISO 14000 or

Other internationally recognized HSE System?

6. Specify any Engineering, Fabrication and Chemical Production

Tests/Codes/Standards employed.

7. Specify any Code Construction Authority possessed by you.

8. Can you provide training facilities at site?

If yes, please describe briefly.

SUB SECTION 4.3 – QUALITY ASSURANCE ACCREDITIONS

No Yes

No Yes

No Yes

No Yes

No Yes

No Yes

ADGAS


Page: 25/49

SECTION 4

PAGE 4 OF 4

Please summarize QA accreditions of your Company and its Associate company, if any:

NAME OF COMPANY AND ITS

ASSOCIATED COMPANIES

ISO OR EQUIVALENT STANDARDS

(Please Specify)

NOTE: Please attach copy of QA Certificate(s) and copy of QA Manual(s).

If your company is not certified yet, but is going through the certification process, specify the name of

Agency employed, if any, and approximate certification completion time:

(Please attach a letter from the Agency confirming the above).

_____________________________________________________________________________________________________

_____________________________________________________________________________________________________

_____________________________________________________________________________________________________

_____________________________________________________________________________________________________

SUB SECTION 4.3 – QUALITY ASSURANCE ACCREDITIONS (Contd.)

ADGAS


Page: 26/49

SECTION 5

COMPANY DECLARATION

ADGAS


Page: 27/49

We hereby declare and undertake that all the information/documents provided are

under our full legal responsibility and confirm that we indemnify and hold ADGAS

harmless against any claim or liability arising from the acceptance or use of such

information/documentation whatever the source of such claim or liability.

We also authorize ADGAS to verify and seek any way of confirmatory of such

information/documents.

We acknowledge that submission of this Questionnaire does not give us any right

whatsoever to be invited to tender for any work being so tendered by ADNOC.

We undertake to inform Company of any changes and will periodically

update/confirm (at least yearly) all items of supplied information.

Signature

Full Name

Designation

On Behalf Of

Date

Company stamp

Note: Official Authorization /Power of Attorney from the owner to the above signed should be attached

DECLARATION

ADGAS


Page: 28/49

\

WORK CATEGORIES

ADGAS


Page: 29/49

Please follow the two steps given below to select Work Categories Codes to identify your company’s services for which you wish to pre-qualify:

Step – 1 Select the Main Group Number from the following table which focuses

on nature of your main activities, as per your Licences:

Main

Group No.

Nature of Main Activity

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

Consultancy/Engineering

EPC, EPCM & Construction Works for Major Projects

Minor Construction & Plant Operation/Maintenance related Works

Information Technology related Services Personnel & Manpower Supply/Services

Finance related Services

Marketing related Services

Domestic/Building related and other General Services

Step – 2 After selecting the applicable Main Group Numbers from above table,

go to the “List of Work Categories” and define your Company’s activities/specialization which can be supported with your

experience/references.

Notes: 1. The term “Contractor” includes Contractor and Consultants.

GUIDELINES

ADGAS


Page: 30/49

GROUP DESCRIPTION

1.0 PROJECTS & PLANT CONSULTANCY/ENGINEERING

1.1 PROJECT CONSULTANCY/ENGINEERING

1.2 OPERATING PLANT CONSULTANCY

2.0 CONSTRUCTION WORKS (MAJOR PROJECTS)

2.1 EPC CONTRACTS – MULTI DISCIPLINE

2.2. EPCM CONTRACTS – MULTI DISCIPLINE

2.3 CIVIL WORKS

2.4 MECHANICAL WORKS

2.5 PIPELINE WORKS

2.6 ELECTRICAL WORKS

2.7 INSTRUMENTATION & TELECOM. WORKS

2.8 GENERAL CONTRACTS (MAJOR PROJECTS)

3.0 PLANT OPERATION & MAINTENANCE

3.1 CIVIL WORKS/MAINTENANCE

3.2 MECHANICAL PLANT/EQUIPMENT WORKS/MAINT.

3.2.1 Turbine – Maintenance

3.2.2 Pumps, Compressors, Other Rotating Eqpt. - Maintenance

3.2.3 Processing Plant & Equipment - Maintenance

3.2.4 Boilers, Furnaces & Reactors - Maintenance

3.2.5 Heat Exchangers - Maintenance

3.2.6 Material Handling Equipments - Maintenance

3.2.7 Plant Maintenance/Overhaul/Shutdown Services

3.2.8 Other Mechanical Plants - Maintenance

3.3 PIPING, COLUMNS AND TANKS - MAINTENANCE

3.3.1 Piping - Maintenance

3.3.2 Columns, Tanks, Vessels & Others - Maintenance

3.4 ELECTRICAL PLANT & EQUIPMENT – MAINT.

3.4.1 Motors & Generators - Maintenance

3.4.2 Sub-stations, Switch Gears & Transformers - Maintenance

3.4.3 Cables, Transmission & Distribution - Maintenance

3.4.4 Other Electrical Plant & Equipment - Maintenance

3.5 INSTRUMENTATION & TELECOM. SYSTEM – MAINT.

3.6 INSPECTION/TESTING/COMMISSIONING SERVICES

3.6.1 Inspection & Testing Services

3.6.2 Commissioning Services

3.7 GENERAL PLANT SERVICES

3.7.1 Hiring Services - Plants

3.7.2 Painting Services - Plants

3.7.3 Plant Cleaning Services

3.7.4 Other Plant Operation/Maintenance Services

C O N T E N T S

ADGAS


Page: 31/49

GROUP DESCRIPTION

4.0 INFORMATION SYSTEMS & TECHNOLOGIES

5.0 PERSONNEL & MANPOWER SERVICES

5.1 MANPOWER SUPPLY - ENGINEERS

5.2 MANPOWER SUPPLY – SUPERVISORS/TECHNICIANS

5.3 MANPOWER SUPPLY – NON TECHNICL PERSONNEL

5.4 OTHER PERSONNEL CONTRACTS/SERVICES

6.0 FINANCE SERVICES

7.0 MARKETING SERVICES

8.0 ADMINISTRATION & GENERAL SERVICES

8.1 CATERING SERVICES

8.2 LEASING SERVICES –

8.3 MEDICAL & HSE SERVICES

8.4 OFFICES, BUILDINGS & VILLAS MAINTENANCE

8.5 TRANSPORTATION SERVIES

8.6 CLEANING SERVICES

8.7 OTHER GENERAL SERVICES

ADGAS


Page: 32/49

WC

CODE WORK CATEGORY (WC) DESCRIPTION.

GROUP 1.0 PROJECTS & PLANT CONSULTANCY/ ENGINEERING

Sub- Group 1.1 covers Front end engineering and design (FEED), Basic engineering, Detailed

Engineering, Project Management/ Consultancy for major project.

1.1- PROJECT CONSULTANCY/ ENGINEERING

110010 ADVANCED PROCESS CONTROL (CONSULTANCY/ENGINEERING) 110020 AERIAL SURVEYS (CONSULTANCY/ENGINEERING) 110030 ARCHITECTURE & INTERIOR DECORATION. (CONSULTANCY/ENGINEERING) 110040 CATHODIC PROTECTION SYSTEMS (CONSULTANCY/ENGINEERING) 110050 CHEMICAL INJECTION SYSTEM (CONSULTANCY/ENGINEERING) 110060 CIVIL & STRUCTURAL(INDUSTRIAL) (CONSULTANCY/ENGINEERING) 110070 CIVIL & STRUCTURAL (NON INDUSTRIAL) (CONSULTANCY/ENGINEERING) 110080 COLD INDUSTRIAL INSULATION (CONSULTANCY/ENGINEERING) 110085 CONCEPTUAL DESIGN (CONSULTANCY/ENGINEERING) 110090 DE-SALINATION /WATER TREATMENT (CONSULTANCY/ENGINEERING) 110100

ENVIRONMENTAL ENGG.(POLLUTION

CONTROL/EFFLUENT TREATMENT) (CONSULTANCY/ENGINEERING)

110110 FRONT END ENGINEERING DESIGN (FEED) (CONSULTANCY/ENGINEERING) 110115 OPTIMIZATION STUDIES (CONSULTANCY/ENGINEERING) 110117 SPECIAL STUDIES/ DESIGN (CONSULTANCY/ENGINEERING) 110120 GAS PROCESSING (CONSULTANCY/ENGINEERING) 110125 OIL & GAS PLANT ONSHORE - EPCM (CONSULTANCY/ENGINEERING) 110130 GAS/OIL PRODUCTION – OFFSHORE (CONSULTANCY/ENGINEERING) 110135 GAS/OIL PRODUCTION – ONSHORE (CONSULTANCY/ENGINEERING) 110140 GAS/TREATMENT EQUIPMENT (CONSULTANCY/ENGINEERING) 110150 GAS/OIL GATHERING CENTERS (CONSULTANCY/ENGINEERING) 110160

ELECTRICAL/ INSTRUMENTATION AND CONTROL

SYSTEMS (CONSULTANCY/ENGINEERING)

110165 LANDSCAPING (CONSULTANCY/ENGINEERING) 110167 LNG/ LPG TANKS SYSTEMS/OIL PLANT (CONSULTANCY/ENGINEERING) 110168 LUBE OIL PLANT (CONSULTANCY/ENGINEERING) 110170 MANAGEMENT INFORMATION SYSTEMS (CONSULTANCY/ENGINEERING) 110180 MARINE ENGINEERING (CONSULTANCY/ENGINEERING) 110190 MARINE SURVEYS (CONSULTANCY/ENGINEERING) 110200 MATERIAL SELECTION FOR CORROSION CONTROL (CONSULTANCY/ENGINEERING) 110210 ONSHORE SURVEYS (CONSULTANCY/ENGINEERING) 110215 OFFSHORE SURVEYS (CONSULTANCY/ENGINEERING)

110220 PACKAGED PROCESS MODULE (CONSULTANCY/ENGINEERING) 110230 PETROCHEMICAL PLANT (CONSULTANCY/ENGINEERING) 110240 PETROLEUM REFINERY (CONSULTANCY/ENGINEERING) 110245 PETROLEUM REFINERY AROMATIC (CONSULTANCY/ENGINEERING) 110250 PIPELINE – OFFSHORE (OIL & GAS) (CONSULTANCY/ENGINEERING) 110260 PIPELINE – ONSHORE (OIL & GAS) (CONSULTANCY/ENGINEERING) 110265 PIPELINE – ONSHORE (EPCM) (CONSULTANCY/ENGINEERING)

ADGAS


Page: 33/49

WC


110270 POWER GENERATION, TRANSMISSION &

DISTRIBUTION (CONSULTANCY/ENGINEERING)

110280 PROCESS LICENSORS (CONSULTANCY/ENGINEERING) 110290

PROJECT MANAGEMENT CONSULTANCY(PMC) –

INDUSTRIAL (CONSULTANCY/ENGINEERING)

110295 PROJECT MANAGEMENT CONSULTANCY(PMC) – NON-INDUSTRIAL

(CONSULTANCY/ENGINEERING)

110300 QUALITY CONTROL (CONSULTANCY/ENGINEERING) 110305 SCADA SYSTEM (CONSULTANCY/ENGINEERING) 110310 SOIL INVESTIGATION - OFFSHORE (CONSULTANCY/ENGINEERING) 110320 SOIL INVESTIGATION – ONSHORE (CONSULTANCY/ENGINEERING) 110325 SULPHUR RECOVERY/ FORMING & HANDLING (CONSULTANCY/ENGINEERING) 110330

TELECOMMUNICATION NETWORK AND

TELEMETRY (CONSULTANCY/ENGINEERING)

110333 TECHNO – ECONOMIC FEASIBILITY STUDY (CONSULTANCY/ENGINEERING) 110335 TOWN PLANNING/MASTER PLAN (CONSULTANCY/ENGINEERING) 110340 WATER INJECTION SYSTEMS (CONSULTANCY/ENGINEERING) 110345 GAS INJECTION SYSTEMS (CONSULTANCY/ENGINEERING) 110350 WATER SUPPLY/ DISTRIBUTION NETWORK (CONSULTANCY/ENGINEERING) 110360 SEWAGE/ DRAINAGE NETWORKS (CONSULTANCY/ENGINEERING) 110365 FIRE & GAS (CONSULTANCY/ENGINEERING) 110370 HVAC (CONSULTANCY/ENGINEERING) 110375 DRAFTING & AS-BUILT DRAWINGS (CONSULTANCY/ENGINEERING) 110380

ENG. DESIGN OF PROCESS FURNCES &

FIRED HEATERS (CONSULTANCY/ENGINEERING)

110385 ASSET INTEGRITY MANAGEMENT SYSTEM (CONSULTANCY/ENGINEERING) 110390 HYDRAULIC MODELLING (CONSULTANCY/ENGINEERING)

110395 HYDRODYNAMIC MODELLING (CONSULTANCY/ENGINEERING)

110400 SWIMMING POOL MAINTENANCE SERVICES (CONSULTANCY/ENGINEERING)

ADGAS


Page: 34/49

GROUP 1.0 PROJECTS & PLANT CONSULTANCY/ ENGINEERING

SUB- GROUP 1.2SUB- GROUP 1.2CONVERS OPERATING PLANT, CONSULTANCY

SERVICES

1.2 OPERATING PLANT CONSULTANCY 120010 AIR CONDITIONING & ELECTRO MECHANICAL – DOMESTIC/INDUSTRIAL

120020 CONCRETE REHABILITATION STUDIES

120030 CORROSION AUDIT/ SURVEYS

120040 ENERGY CONSERVATION STUDIES

120060 FIELD TESTING OF NEW APPLICATIONS

120070 FIRE & SAFETY CONSULTANCY

120080 INDUSTRIAL ENGINEERING/ PRODUCTIVITY STUDIES

120081 ISO 14000/ QC SYSTEM & PROCEDURES

120082 ISO 9000/QC SYSTEM & PROCEDURES

120083 ISO 9000/ QC CERTIFICATION

120084 ISO 14000/ QC CERTIFICATION

120085 MATERIAL MANAGEMENT CONSULTANCY

120090 MECH PLANT & MATERIAL HANDLING SYSTEM - OFFSHORE

120100 MECH PLANT & MATERIAL HANDLING SYSTEM - ONSHORE

120110 NOISE SURVEYS & ANALYSIS

120115 OPERATING PROCEDURES – PLANT OPERATION / MAINT

120120 PLANT INSPECTION CONSULTANCY SERVICES

120130 PLANT OPERATION STUDIES (RELIABILITY, PERFORMANCE, FAILURE ETC.)

120140 PLANT SURVEYS – MECHANICAL/ ELECTRICAL

120150 PRESERVATION STUDIES & SERVICES – EQUIPMENT & SPARES

120160 RISK / HAZARD / SAFETY STUDIES

120165 ACCIDENT, DAMAGE INVESTIGATION CONSULTANCY

120170 SECURITY RELATED CONSULTANCY

120190 STUDIES ON CONSTRUCTION MATERIAL AND TESTING LABORATORY

120200 TECHNICAL AUDIT / SURVEYS

120220 VIBRATION SURVEYS OF ROTATING EQUIPMENT

120230 WASTE CONTROL / EFFLUENT TREATMENT

120240 STRUCTURAL STEEL FRAME ANALYSIS

ADGAS


Page: 35/49

GROUP 2.0 CONSTRUCTION WORKS (MAJOR PROJECTS)

SUB- GROUP 2.1 COVERS EPC AND SUB-GROUP2.2 COVERS EPCM CONTRACT FOR MAJOR PROJECTS:

2.1- ENGINEERING, PROCUREMENT & CONSTRUCTIONS (EPC) CONTRACTS. 210010 DESALINATION UNITS- EPC

210015 LNG/ LPG SYSTEM – EPC

210020 MARINE WORKS – EPC

210025 NITROGEN/ OXYGEN PLANTS - EPC

210030 OIL & GAS PLANTS – OFFSHORE- EPC

210040 OIL & GAS PLANTS – ONSHORE- EPC

210050 PETRO- CHEMICAL PLANTS - EPC

210060 PIPELINES OFFSHORE – EPC

210070 PIPELINES ONSHORE - EPC

210080 POWER GENERATION PLANTS – EPC

210090 TANK FARMS – EPC

210100 UNLEADED GASOLINE PRODUCTION PLANT - EPC

2.2- ENGINEERING, PROCUREMENT & CONSTRUCTIONS MANAGEMENT (EPCM) CONTRACTS

220010 MARINE WORKS – EPCM

220020 OIL & GAS PLANTS OFFSHORE – EPCM

220030 OIL & GAS PLANTS ONSHORE – EPCM

220040 PETRO-CHEMICAL PLANTS - EPCM

220050 PIPELINES OFFSHORE – EPCM

220060 PIPELINES ONSHORE - EPCM

220070 POWER GENERATION PLANTS – EPCM

SUB-GROUP 2.3 TO 2.8 COVER CONSTRUCTION WORK FOR ALL ENGINEERING

DISCIPLINES FOR MAJOR PROJECTS:

2.3 CIVIL WORKS 230010 BRIDGES

230020 BUILDINGS, OFFICES, ETC – CONSTRUCTION

230030 CEILING AND INTERNAL PARTITIONS WORKS

230035 DRAINAGE / SEWERAGE WORKS

230040 DREDGING/ RECLAMATION – OFFSHORE

230050 INDUSTRIAL CIVIL WORKS

230055 INFRASTRUCTURE WORKS

230060 INTERIOR DECORATION WORKS

230070 MARINE CONSTRUCTION – JETTY, HARBOUR ETC.

230080 OFFSHORE ENGG. & CONSTRUCTION

230090 PILING / SHEET PILING

230095 PRE-ENGINEERING BUILDINGS/ STEEL STRUCTURE.

230100 ROADS/ CULVERTS WORKS

230110 SEA WATER INTAKE

230120 SITE PREPARATION WORKS

230130 SOIL/ FOUNDATION GROUTING

230140 STEEL STRUCTURAL WORKS- ERECTION

230145 STEEL STRUCTURAL WORKS – FABRICATION

230150 TUNNELING/ NON- DESTRUCTIVE ROAD CROSSINGS.

230155 HORIZONTAL DIRECTION DRILLING “HDD”

230160 WATER SUPPLY NETWORKS WORKS

230165 SEAWATER INTAKE / OUTFALL CONSTRUCTION

230170 GROUND COMPACTION (VIBRO-COMPACTION)

ADGAS


Page: 36/49

WC


230175 PIPLINE POTECTION WORKS

230180 MODULAR CONSTRUCTION - PAU's(PRE-ASSEMBLED UNIT)

230185 MODULAR CONSTRUCTION -PAR's (PRE-ASSEMBLED RACKS)

230190 MODULAR CONSTRUCTION - BUILDINGS

230195 JACKET INSTALLATION

230200 SWIMMING POOL CONSTRUCTION

230205 WATER FEATURES WORKS (e.g. LAGOONS,FOUNTAINS,WATER FALLS LAZY RIVERS etc.)

2.4 MECHANICAL WORKS 240010 ARCHITECTURAL FIRE WALLS / ACCOMMODATION MODULES

240020 CRANE / OVERHEAD BRIDGE – ERECTION

240030 DESALINATION UNITS – ERECTION

240040 EFFLUENT TREATMENT PLANTS

240045 ENVIRONMENTAL RELATED WORKS ( POLLUTION CONTROL/MONITORING, ETC)

240050 FABRICATION WORKS- GENERAL

240060 HV & AC WORKS- INDUSTRIAL

240065 AIR-CONDITIONING – HIGH RISE BUILDINGS (CENTRAL CHILLED WATER SYSTEMS)

SUPPLY & INSTALLATION.

240070 LPG/ LNG TANKS- ERECTION

240075 FLOATING ROOF TANK ERECTION

240080 MECHANICAL EQUIPMENT - ERECTION

240090 MOLTEN SULPHUR TANKS

240095 SULPHUR RECOVERY / FORMING & HANDLING PLANT - ERECTION

240100 OIL & GAS PLANTS – ERECTION

240110 PLATFORMS ERECTION – OFFSHORE

240120 POWER STATIONS – ERECTION.

240130 SITE WORK – TANK FORMS/FLOATING ROOF

240135 MARINE WORK – STEEL JETTY ETC.

240140 TELECOM TOWERS

240145 WATER PUMPING STATION - ERECTION

240148 SEWERAGE PUMPING STATION - ERECTION

240150 WATER TREATMENT PLANT WORKS.

240155 GENERAL FABRICATION OF STRUCTURAL,SKIDS,PIPESPOOLING,PLATFORM

240160 FLARE TOWER ERICTION

2.5 PIPELINE WORKS 250010 CEMENT LININGS OF PIPES

250020 COLD & CRYOGENIC INSULATION WORKS

250030 FIRE FIGHTING SYSTEMS – PIPING

250040 PIPELINES - INSULATION WORK

250050 PIPELINES – COATINGS (FBE/ PE)

250051 PIPELINES – COATINGS PP (POLYPROPYLENE)

250052 PIPELINES – COATINGS & WRAPPING (COAL TAR/ BITUMEN ENAMEL)

250055 PIPELINES – CONCRETE COATING

250060 PIPELINES – FIELD JOINT COATING

250065 PIPELINES – TIE-INS

250070 PIPELINES – CONSTRUCTION - OFFSHORE

250080 PIPELINES – CONSTRUCTION – ONSHORE

250090 SANDBLASTING & PAINTING WORKS

ADGAS


Page: 37/49

WC


2.6 – ELECTRICAL WORKS 260005 BUILDING MANAGEMENT SYSTEMS

260010 CATHODIC PROTECTION SYSTEMS WORKS

260020 ELECTRICAL WORKS – INDUSTRIAL

260030 ELECTRO-MECHANICAL (BUILDINGS/DOMESTIC)

260045 CABLE LAYING AND TRENCH EXCAVATION

260050 CABLE LAYING – SUBMARINE

260055 STREET LIGHTING & ACCESSORIES

260060 POWER TRANSMISSION/DISTRIBUTION – OVERHEAD

2.7 – INSTRUMENTATION & TELECOM. WORKS

270010 FIRE AND SAFETY WORKS

270020 INSTRUMENTATION & CONTROL WORKS – INDUSTRIAL

270030 TELECOMMUNICATION WORKS

2.8- GENERAL CONTRACTS (MAJOR PROJECTS)

280010 CAMP CATERING FOR MAJOR PROJECTS - ONSHORE

280015 CAMP CATERING - OFFSHORE

280020 CERTIFICATION (DESING/STATUTORY REQUIREMENTS)

280025 SHIP CLASSIFICATION

280030 FREIGHT FORWARDING & CLEARING- MAJOR PROJECTS

280040 LAND TRANSPORTATION

280042 HEAVY LIFT TRANSPORTATION SERVICES

280045 TRANSPORTATION – AGGREGATE, SAND, ROCKS, ETC

280050 LOCAL SEA TRANSPORTATION

280055 INTERNATIONAL SEA TRANSPORTATION

280060 MARINE SUPPORT SERVICES – CHARTER HIRE

280065 JACK UP BARGE HIRE

280070 NDT-RADIOGRAPHIC, ULTRASONIC ETC

280075 NDT-RADIOGRAPHIC DIGITIZATION

280080 THIRD PARTY INSPECTION

ADGAS


Page: 38/49

GROUP 3.0 PLANT OPERATION & MAINTENANCE

Group 3 covers Plant, maintenance, rehabilitation, refurbishment; minor

construction works for plant operation, covering all engineering disciplines.

3.1 – CIVIL WORKS/ MAINTENANCE 310010 ALUMINIUM & GLASS WORKS

310020 BUILDING CONSTRUCTION- MINOR

310022 BUILDING MAINTENANCE

310024 BUILDING MAINTENANCE/ SERVICE AGREEMENTS

310030 CONCRETE – PRECAST

310032 CONCRETE – PRESTRESS

310035 GRC – GLASS REINFORCED

310040 CONCRETE REHABILITATION WORK

310045 CONCRETE – READY MIX

310050 DEMOLITION

310060 DRAINAGE/SEWERAGE – MINOR WORKS

310070 EARTHWORK

310080 FENCING AND GATES

310085 GUNITING/SHORTCRETING SERVICES

310090 MARINE – REHABILITATION

310095 MASONRY WORKS

310100 ROAD MAINTENANCE/REPAIRS

310110 SOIL RECLAMATION

310115 SOIL TREATMENT/CLEANING/STERILISATION

310120 SOIL CONTAINMENT/STABILIZATION

310130 SPECIALIST CONSTRUCTION (GLAZING, DOMES, SHELLS ETC.)

310140 FABRICATION (GENERAL) STEEL STRUCTURE- MINOR WORKS.

310150 WATER PROOFING WORKS

310160 HOT DIP GALVANIZATION WORKS

310170 AERIAL SURVEY WORKS

3.2 – MECHANICAL PLANT/EQUIPMENT WORKS/MAINT.

3.2.1- TURBINES- MAINTENANCE 321010 TURBINES – GAS

321020 TURBINES – SOLAR

321030 TURBINES – STEAM

321040 TURBINES MAJOR COMPONENTS RECONDITIONING & REPAIRS

321050 INSPECTION, OVERHAUL/ REPAIR, REFURBISHMENT OF COMPONENTS. - GE FRAME 5

3.2.2- PUMPS, COMPRESSORS, OTHER ROTATING EQPT.- MAINT. 322010 AIR BLOWERS

322020 PUMPS OVERHAUL – OTHER THAN CRYOGENIC

322025 PUMPS OVERHAUL – CRYOGENIC (LNG/ LPG/ OTHER LIQUID GASES)

322030 COMPRESSORS OVERHAUL

322040 DIESEL ENGINES OVERHAUL

322050 GAS COMPRESSOR STATIONS OVERHAUL

322080 ROTATING EQUIPMENT – OTHERS

322090 ROTOR BALANCING.

ADGAS


Page: 39/49

3.2.3- PROCESSING PLANT & EQUIPMENTS- MAINTENANCE 323010 FILTERS- AIR/PROCESS

323030 FUEL FILTRATION EQUIPMENTS

323040 PROCESS EQUIPMENTS

323050 REFINERY PLANTS INCLUDING REVAMPING WORKS

323060 SULPHUR FORMING PLANTS

323070 SULPHUR HANDLING PLANTS

323080 SULPHUR RECOVERY PLANT

323090 WATER TREATMENT PLANTS – CLEAN WATER (FEED)

323100 WATER TREATMENT PLANTS – DIRTY WATER/ EFFLUENT

3.2.4- BOILERS, FURNACES &REACTORS – MAINTENANCE 324010 BOILERS AND H.R.B.

324020 HEATERS & DRYERS

324040 FURNACE

324060 REACTORS

324070 REFRACTORY LININGS- BOILERS, FURNACES ETC.

324080 BOILERS, H.R.B. & PRESSURE VESSELS - OVERHAUL / REPAIR

3.2.5 – HEAT EXCHANGERS – MAINTENANCE 325010 HEAT EXCHANGERS – REFURBISHMENT

325020 HEAT EXCHANGERS MAINT. – BUNDLE REFURBISHMENT

325030 HEAT EXCHANGERS MAINT – CHEMICAL CLEANING

325040 HEAT EXCHANGERS MAINT. – MECHANICAL CLEANING

325050 HEAT EXCHANGERS MAINT. – WATER JETTING

3.2.6- MATERIAL HANDLING EQUIPMENTS- MAINTENANCE 326010 MATERIAL HANDLING SYSTEMS: CONVEYERS, BELTS ETC

326020 EARTH MOVING EQUIPMENT - MAINTENANCE

326030 LOADING ARMS.

3.2.7- PLANT MAINTENANCE/OVERHAUL/SHUTDOWN SERVICES 327010 PLANT OVERHAUL/SHUTDOWN MAINTENANCE (MAIN CONTRACTOR)

327020 PLANT OVERHAUL/SHUTDOWN SERVICES – ELECTRICAL EQUIPMENT

327030 PLANT OVERHAUL/SHUTDOWN SERVICES – MAJOR MACHINERY

327040 PLANT OVERHAUL/SHUTDOWN SERVICES – ROTATING EQUIPMENT

327050 PLANT OVERHAUL/SHUTDOWN SERVICES – HP POWER JETTING

327060 PLANT OVERHAUL/SHUTDOWN SERVICES – CLADDING/INSULATION

327070 PLANT OVERHAUL/SHUTDOWN SERVICES – PAINTING

327080 PLANT OVERHAUL/SHUTDOWN SERVICES – INSTRUMENTATION

327090 PLANT OVERHAUL/SHUTDOWN SERVICES – HEAT EXCHANGER RETUBING

327100 PLANT OVERHAUL/SHUTDOWN SERVICES –EXCHANGER BUNDLE PULLING

327110 PLANT OVERHAUL/SHUTDOWN SERVICES –PIPING FABRICATION

327120 PLANT OVERHALL/SHUTDOWN SERVICES- CATALYST REPLACEMENT

ADGAS


Page: 40/49

3.2.8- OTHER MECHANICAL PLANTS – MAINTENANCE 328010 AIR COOLER CLEANING

328030 FLARE SYSTEMS & BURN PITS

328040 HV & AC MAINTENANCE

328050 MECHANICAL AND WELDING SERVICES

328070 PLATFORM MAINTENANCE – OFFSHORE

328075 PLATFORM MAINTENANCE – ONSHORE

328100 VALVES REFURBISHMENT

328110 ONLINE LEAK SEALING SERVICES

328120 LEAK SEALING SERVICES

3.3- PIPING, COLUMNS AND TANKS – MAINTENANCE

3.3.1- PIPING- MAINTENANCE 331030 HEAT TRACING SYSTEMS (STEAM/ELECTRICAL)

331040 HOT TAPPING WORKS

331060 INSULATIONS, CLADDING REPAIRS – PIPING

331070 PIPING – LOW TEMPERATURE SERVICE

331100 PIPING & SPOOLS ( STEEL) – FABRICATION/INSTALLATION/ REPAIRS/ RENEWAL

331110 PIPING (R.T.R.P. & G.R.P.)- FABRICATION/ INSTALLATION/ REPAIRS/ RENEWAL

331120 DUPLEX PIPING – FABRICATION/ REPAIRS/REPLACEMENT/ RENEWAL

3.3.2- COLUMNS, TANKS, VESSELS & OTHER – MAINTENANCE 332010 COLUMNS- TRAYS & INTERNALS

332020 COOLING TOWERS MAINTENANCE

332030 RUBBER LININGS (TANKS, VESSELS, COLUMNS)

332040 INSULATION, CLADDING REPAIRS- COLUMNS, TANKS, VESSELS

332050 TANKS- SLUDGE REMOVAL

332055 TANKS – OVERHAUL INCLUDING CLEANING, INSPECTION, REPAIRS ETC.

332060 INTERNAL LININGS (TANKS, VESSELS, COLUMNS)

3.4 – ELECTRICAL PLANT & EQUIPMENT – MAINTENANCE

3.4.1-MOTORS AND GENERATORS – MAINTENANCE 341010 BALANCING OF MOTOR SHAFTS

341020 ELECTRIC MOTORS DC/VARIABLE SPEED

341030 ELECTRIC MOTORS MAINTENANCE

341050 EMERGENCY DIESEL GENERATORS

341060 GENERATORS OVERHAUL AND REPAIRS

341070 MOTOR OPERATED VALVES (M.O.V.)

341080 POWER GENERATION MAINTENANCE

341090 REWINDING & SERVICING OF GENERATORS

341100 REWINDING/REPAIRS OF MOTORS

341120 SOLAR POWER PANELS

341140 THYRISTER DRIVES

3.4.2-SUB STATIONS, SWITCH GEARS & TRANSFORMERS – MAINTENANCE 342010 TRANSFORMS SERVICING & REWINDING

342020 SHORT CIRCUIT CURRENT LIMITORS

342030 SUBSTATION EQUIPMENTS MAINTENANCE

342050 SWITCH GEARS HT/LT/MCC MAINTENANCE

342070 SWITCHYARDS

342090 SWITCH GEARS HT / LT / MCC - MAINTENANCE

ADGAS


Page: 41/49

3.4.3-CABLES, TRANSMISSION AND DISTRIBUTION – MAINTENANCE 343010 CABLE TRAYS/RACKS MAINTENANCE

343030 OVERHEAD TRANSMISSION LINES MAINTENANCE

343040 UNDERGROUND CABLES AND ACCESSORIES MAINTENANCE

3.4.4-OTHER ELECTRICAL PLANT & EQUIPMENTS – MAINTENANCE 344010 BATTERIES/BATTERY CHARGERS / U.P.S.

344020 CATHODIC PROTECTION SYSTEM MAINTENANCE

344030 CONTROL PANELS/STATIONS MAINTENANCE

344035 CORROSION PREVENTION/MONITORING SYSTEM

344040 LIGHTING MAINTENANCE – GENERAL

344050 EARTHING SYSTEM

344060 ELECTRICAL TESTING EQUIPMENTS

344080 INDUSTRIAL LIGHTING SYSTEMS – HAZARDOUS AREA

344090 INDUSTRIAL WIRING

344100 NAVIGATIONAL SIGNALLING SYSTEMS

3.5 – INSTRUMENTATION & TELECOM. SYSTEMS- MAINTENANCE 350010 ANALYSERS

350030 ANTI-SURGE CONTROL SYSTEMS

350040 BLENDING SYSTEMS

350050 CCTV/CATV/MATV/LV INSTRUMENTATION SYSTEMS – INST. & MAINT.

350090 ELECTRONIC CARD REPAIRS

350100 EMERGENCY SHUTDOWN SYSTEMS

350110 EXPLOSION & WEATHERPROOF TELEPHONES, ACOUSTIC BOOTH ETC.

350120 FIRE & GAS SYSTEM REPAIRS

350130 INSTRUMENT SHELTER CABINS

350140 INSTRUMENTATION & COMMUNICATION CABLING (UNDERGROUND)

350150 INSTRUMENTATION & COMMUNICATION CABLING (OVERHEAD)

350160 INSTRUMENTATION TUBING

350170 INSTRUMENTATION TEST/REPAIR SERVICES

350180 INSTRUMENTS MEASUREMENT / CALIBRATION SERVICES

350190 LAB INSTRUMENTS MAINTENANCE/REPAIRS

350230 METERING SYSTEMS

350240 MICROWAVE SYSTEMS

350250 SCADA SYSTEMS / PLC

350260 POP TESTING OF SAFETY RELIEF VALVES

350270 PRESSURE REGULATING STATIONS

350280 PROCESS CONTROL & AUTOMATION

350300 RADIO PAGING SYSTEMS

350320 SAFETY CONTROL SYSTEMS

350330 SATELLITE SYSTEMS

350340 TELECOMMUNICATION CABLING – FIBRE OPTIC

350350 TELECOMMUNICATION CABLING – GENERAL

350360 TELECOMMUNICATION EQUIPMENT REPAIRS

350370 TELEPHONE SYSTEMS

350380 TRAINING SIMULATION SYSTEMS

350390 UHF RADIATION

350400 VIBRATION MONITORING SYSTEMS

ADGAS


Page: 42/49

GROUP 3.0 PLANT OPERATION & MAINTENANCE

3.6- INSPECTION/ TESTING/ COMMISSIONING SERVICES

3.6.1 – INSPECTION AND TESTING SERVICES 361010 COMBUSTION/GAS PATH INSPECTION OF GAS TURBINES

361020 CORROSION INSPECTION

361030 CRUDE ASSAY/TESTING

361040 HEAT EXCHANGER – EDDY CURRENT TESTING

361050 HEAT EXCHANGER – HYDRAULIC TESTING

361060 HYDRAULIC/HYDROSTATIC TESTING

361080 INSPECTION & TESTING OF LIFTS, CRANES, SLINGS, TACKLES ETC.

361095 MATERIAL TESTING – CIVIL

361096 MATERIAL FINAL INSPECTION

361097 LABORATORY TESTING – OIL/GAS/WATER ETC.

361098 MATERIAL TESTING – METALLURGICAL.

361099 MATERIAL TESTING – PAINTING/COATING

361100 MARINE/DIVING/SUB-SEA INSPECTION

361120 INSPECTION – PIPELINES

361125 INSPECTION – TANKS/VESSELS ETC.

361130 SOIL TESTING

361140 STRESS ANALYSIS

361150 VIBRATION TESTING OF ROTATING EQUIPMENTS

361160 CCTV INSPECTION

3.6.2 – COMMISSIONING SERVICES 362010 COMMISSIONING & START UP SERVICES – PLANT

362020 PIPELINES – NITROGEN PURGING

362030 PIPELINES – PIGGING SERVICES

362035 PIPELINES – INTELLIGENT PIGGING SERVICES

362040 PIPELINES – SWABBING, HYDROTESTING, DEWATERING & DRYING

3.7- GENERAL PLANT MAINTENANCE SERVICES

3.7.1 – HIRING SERVICES – PLANTS 371010 HIRE OF CRANES

371020 HIRE OF EARTH MOVING EQUIPMENTS

371030 HIRE OF HEAVY LIFTS AND TRAILER BEDS

371040 HIRE OF OTHER MECHANICAL/ELECTRICAL EQUIPMENTS

371050 HIRE OF TEST EQUIPMENT/INSTRUMENTS

371060 HIRE OF TRANSPORTATION – BULK MATERIAL

3.7.2 – PAINTING SERVICES – PLANTS 372010 BLASTING & PAINTING –STEEL STRUCTURE

372020 BLASTING & PAINTING- TANKS, VESSELS & COLUMNS

372025 BLASTING & PAINTING – PIPING

372030 BLASTING & PAINTING – OTHER EQUIPMENT

372035 BLASTING & PAINTING – SPECIAL

372040 MARINE STRUCTURE – PAINTING

372050 FIRE PROOFING BY INTUMESCENT PAINTING

372055 FIRE PROOFING WORKS – GENERAL

372060 FIRE PROOFING WORKS - CABLES

ADGAS


Page: 43/49

3.7.3 – PLANT CLEANING SERVICES 373010 CHEMICAL/TOXIC CLEANING

373025 WATER TANKS CLEANING – INDUSTRIAL

373030 DUMPING SITE CLEARING

373040 EXCAVATION, DISPOSAL & TREATMENT OF CONTAMINATED SOILS

373050 REMOVAL / DISPOSAL OF WASTE MATERIALS

373060 SEWAGE CLEANING/ DRAINAGE CLEARING SERVICES

373070 DEWATERING SERVICES

373080 HYDRO JETTING

373090 REMOVAL / DISPOSAL OF HAZARDOUS WASTE MATERIALS

3.7.4 – OTHER PLANT OPERATION/ MAINTENANCE SERVICES 374020 CAMP OPERATION & MAINTENANCE

374025 FREIGHT FORWARDING & CLEARANCE SERVICES

374027 CUSTOM CLEARANCE

374029 LIQUID SUPHUR TRANSPORTATION BY TANKERS

374030 CARPENTRY WORKS

374040 CATALYST RECLAMATION/ REGENERATION/ DISPOSAL

374045 CORROSION PROJECTION / PREVENTION WORKS

374060 DISMANTLING

374080 HEAT TREMANT- POST WELD (P.W.H.T)/STRESS RELIEVING

374100 INDUSTRIAL DOORS(FOR WORK SHOP & FACTORIES)

374110 INDUSTRIAL SECURITY SYSTEMS

374130 METAL SPRAYING/REBUILDING

374140 CRANES MAINTENANCES (O.H)

374160 SCAFFOLDING SERVICES

374165 ROPE ACCESS SERVICES

374170 SIGN BOARDS

374180 ROAD MARKINGS

374200 STRESS RELIEVING

374205 THERMAL INSULATION – OTHER THAN PIPELINE & PIPINGS

ADGAS


Page: 44/49

GROUP 4.0- INFORMATION SYSTEMS & TECHNOLOGIES

GGroup 4 covers Consultancy, Development, Installation and Maintenance Contracts related to information Systems & Technologies:

400010 COMPUTER HARDWARE (PC SERVERS & PCS) MAINTENANCE

400012 SUPER COMPUTER, MAINFRAMES AND MINI COMPUTER SYSTEMS ( BRANDED)

MAINTENANCE

400015 ELECTRONIC DOCUMENT MANAGEMENT SYSTEM (IMAGING SYSTEM ETC)

400020 COMPUTER NETWORK MAINTENACE – SITE WORK

400030 COMPUTER NETWORKING NETWARK MANAGEMENT – TURNKEY

400040 BUSINESS APPLICATION SOFTWARE PACKAGES (DEVELOPMENT, SUPPLY,

INSTALLATION & MAINTENANCE)

400050 PCs., PRINTER, PLOTTER & SCANARS ( SUPPLY & INSTALLATION)

400055 COMPUTER PERIPHERALS & COMPONENTS (SUPPLY & INSTALLATION)

400060 COMPUTER STATION/IT/AUTOMATION STUDIES/ CONSULTANCY

400080 BRANDED SUPER COMPUTERS, MAINFRAMES AND MINI COMPUTER SYSTEMS –

SUPPLY INSTALLATION & MAINTENANCE

400090 NETWORKING COMPONENTS (BRIDGES, GATEWAYS, ROUTERS, HUBS, ANALYSER)-

SUPPLY & INSTALLTION

400095 STRUCTURED CABLING/UTPS/FIBER OPTICS (SUPPLY, INSTALLATION &

MAINTENANCE)

400120 SOFTWARE DEVELOPMENT

400125 SOFTWARE – STANDARD AND MISCELLANEOUS

400130 IT HARDWARE SUPPORT SERVICES – HARDWARE ENGINEERS

400140 IT SOFTWARE SUPPORT SERVICES – SOFTWARE ENGINEERS

400150 DOCUMENT SCANNING & INDEXING SERVICES

ADGAS


Page: 45/49

GROUP 5.0- PERSONNEL & MANPOWER SERVICES

G Group 5 covers Manpower and other personnel related Contracts Services:

5.1 MANPOWER SUPPLY ENGINEERS

510010 ARCHITECTS

510020 AUTOMATION ENGINEERS

510030 CIVIL ENGINEERS

510040 COMMISSIONING ENGINEERS

510050 COMPUTER HARDWARE ENGINEERS

510060 COMPUTER SOFTWARE ENGINEERS

510070 CONSTRUCTION ENGINEERS

510080 CONTRACTS ENGINEERS

510100 CORROISION ENGINEERS

510110 COST ENGINEERS

510120 DATA NETWORK ENGINEERS

510130 ELECTERICAL ENGINEERS

510135 GEOPHYSICIST ENGINEERS

510140 QA/QC/INSPECTION ENGINEERS

510150 INSTRUMATION ENGINEERS

510160 OPERATION ENGINEERS

510170 MATERIALS ENGINEERS

510180 MECHANICAL ENGINEERS

510190 PIPLINE ENGNEERS

510200 PROCESS / OPERATION ENGINEERS

510210 PROJECT ENGINEERS

510215 MARINE ENGINEERS

510220 PURCHASING ENGINEERS/BUYERS

510222 RELIABILITY ENGINEERS

510225 QUANTITY SURVEYORS ENGINEERS

510230 ROTATING EQPT.ENGINEERS

510240 SAFETY ENGINEERS(HEALTH,SAFETY & ENVIRONMENTAL)

510245 SYSTEM ANALYSTS

510250 TELECOMMUNIATION ENGINEERS

510260 PLANNING / SCHEDULING ENGINEERS

510270 REGISTRATION CO-ORDINATORS

510280 MATERIALS CO-ORDINATOR

510290 STORE KEEPER

510300 SENIOR STORE KEEPER

510900 SPECIALIST MANPOWER

510980 ENGINEERS – VARIOUS DISCIPLINES (FOR MAIN CONSULTANTS ONLY)

ADGAS


Page: 46/49

GROUP 5.0- PERSONNEL & MANPOWER SERVICES

5.2 MANPOWER SUPPLY – SUPERVISORS/TECHNICIANS

520010 NDT SUPERVISOR/TECHNICIANS

520020 CODED WELDERS

520030 SUPERVISORS – MECH/ELEC./INSTR./CIVIL

520040 TECHNICIANS – MECH/ELEC./INSTR. & PIPE FITTERS

520050 PAINTERS

520060 DIVERS

520070 PROGRAMMERS

5.3 MANPOWER SUPPLY – NON TECHNICAL PERSONNEL

530010 FINANCIAL ACCOUNTANTS

530015 LEGAL ADVISOR

530020 STAFF FOR CLERICAL/ADMINISTRATION SERVICES

530030 CLEANING SUPERVISORS/OFFICERS

530040 CATERING SUPERVISORS/OFFICERS

530042 DATA ENTRY CLERKS

530045 DOCTORS AND MEDICAL STAFF

530050 LABOURS

530060 DRIVERS/OPERATORS (FOR FORK LIFT ETC.)

5.4 OTHER PERSONNEL CONTRACTS/SERVICES

540010 MANAGEMENT, ORGANIZATION & DEVELOPMENT CONSULTANCY

540015 PROCEEDURE MANUALS & SYSTEMS CONSULTANCY

540020 RECRUITMENT SERVICES FOR ADMIN & NON TECHNICAL PERSONNEL

540030 RECRUITMENT SERVICES FOR MANAGERIAL & TECHNICAL PERSONNEL

540040 SECONDMENT OF MANPOWER

540050 SPECIALIZED TRAINING SERVICES

ADGAS


Page: 47/49

6.0 – FINANCE SERVICES

Group 6 covers all studies and Consultancy Contracts related to Financial Services:

600010 ACCOUNTING CONSULTANCY

600020 ASSETS/INVENTORY AND RECORDS MANAGEMENT

600030 COST ENGINEERING CONSULTANCY

600040 FINANCIAL AUDIT

600045 INSURANCE POLICIES

600050 LEGAL SERVICES CONSULTANCY

600055 FINANCE RELATED POLICIES & PROCEEDURE MANUALS

600060 SYSTEM AUDIT

600070 RISK MANAGEMENT & INSURANCE CONSULTANCY

7.0 – MARKETING SERVICES

Group 7 covers all studies and Consultancy Contracts related to Marketing Services:

700010 MARKETING STUDIES

700020 SHIP CONSTRUCTION SUPERVISION

700030 SHIP LOADING SUPERVISION

700040 SHIP MANAGEMENT

GROUP 8.0 ADMINISTRATION & GENERAL SERVICES

Group 8 covers General Services related to Administration Services including maintenance for offices, Buildings, Villas, Medical etc.

8.1 – CATERING SERVICES 810020 CATERING SERVICES CLUBS, OFFICES ETC. – OPERATION & MAINTENANCE

8.2 – LEASING SERVICES 820010 LEASING – BUSES/CARS

820020 LEASING – INDUSTRIAL AREAS

820030 LEASING – OFFICE EQUIPMENTS/MACHINES

820040 LEASING – TRANSPORTATION & MATERIAL HANDLING EQUIPMENTS

820050 LEASING – ACCOMMODATION – SHORT TERM/ LONG TERM

8.3 – MEDICAL & HSE SERVICES 830010 MEDICAL SERVICES (PHARMACEUTICAL ETC.)

830020 MEDICAL SERVICES – MANAGEMENT OF HOSPITALS/CLINICS

830030 MEDICAL EQUIPMENT – MAINTENANCE

830040 STUDIES ON HEALTH, SAFETY & ENVIRONMENT (HSE)

830045 STUDY ON OIL SPILLS/MARINE ENVIRONMENT PROTECTION

830047 HARBOUR POLLUTION CONTROL/SKIMMING/DEBRIS CLEAN-UP SERVICES

830050 MEDICAL SERVICES – DENTAL CLINICS

ADGAS


Page: 48/49

8.4 – OFFICES, BUILDINGS AND VILLAS MAINTENANCE 840010 AIR CONDITIONING – GENERAL PLANT (CHILLED WATER SYSTEM) – SUPPLY & INST.

840015 AIR CONDITIONING – GENERAL PLANT (CHILLED WATER SYSTEM) – OPERATION &

MAINT.

840020 AIR CONDITIONING – PACKAGE/SPLIT/WINDOW TYPE – SUPPLY & INST.

840022 AIR CONDITIONING – PACKAGE/SPLIT/WINDOW TYPE (OPERATION & MAINT.)

840023 COLD STORAGE CONSTRUCTION & MAINTENANCE

840025 CENTRALISED COOKING GAS SYSTEM

840028 FIRE ALARM & DETECTION SYSTEM – DOMESTIC

840029 FIRE FIGHTING/ALARM SYSTEM MAINTENANCE (SERVICE AGREEMENTS)

840030 PLUMBING & SANITATION – SUPPLY & INST.

840032 PLUMBING & SANITATION – MAINTENANCE

840040 GENERAL BUILDING MAINT. (CIVIL, ELECT. & PLUMBING)

840050 KITCHEN CABINETS & FITTINGS – SUPPLY, INSTALLATION & MAINT.

840060 LIFTS/ELEVATORS, ERECTION/MAINTENANCE

840070 OFFICE EQUIPMENTS, FURNITURE & FIXURES – SUPPLY & FIXING

840072 OFFICE EQUIPMENT – MAINTENANCE

840075 OFFICE REFURBISHMENT & FURNISHINGS – PROJECTS

840080 PARTITION (METAL) AND ALUMINIUM CLADDINGS

840090 PORTABLE BUILDINGS (CARAVAN, RIGID, BUTLER BUILDINGS)

840100 PORTABLE WATER TANKERS FOR BUILDINGS & VILLAS

840102 HIRE OF PORTACABINS/CARAVANS/TEMPORARY ACCOMMODATION UNITS

840105 PORTABLE/BOTTLED WATER AND WATER COOLER SERVICE

840110 PUBLIC ADDRESS SYSTEMS

840120 FLOORING (SPECIALIZED INCLUDING RUBBER/PVC/WOODEN/EPOXY, ETC.)

840130 H.T. POWER STATION/SUBSTATION/SWITCH GEAR/TRANSMISSION NETWORK –

SUPPLY & INST.

840140 H.T. POWER STATION/SUBSTATION/SWITCH GEAR/TRANSMISSION NETWORK –

MAINTENANCE

840150 LV/MV DISTRIBUTION NETWORK, PANELS, PROTECTIVE DIVICES ETC. – SUPPLY &

INST.

840160 LV/MV DISTRIBUTION NETWORK, PANELS, PROTECTIVE DIVICES ETC.– MAINT.

840170 AIR DUCT CLEANING AND SANITIZING

840175 KITCHEN HOOD EXHAUST SYSTEM CLEANING AND SANITIZING

840180 INSTALLATION OF FILTRATION UNITS FOR GASES & SMOKE & BACTERIA & VIRUSES

8.5 – TRANSPORTATION SERVICES 850010 LIGHT VEHICLE MAINTENANCE

850020 SHIFTING OF OFFICE PARTITIONS ALONG WITH DOORS

850030 TRANSPORT MAINTENANCE/REPAIR SERVICE

850040 TANSPORTATION – OFFICE FURNITURE/EQUIPMENT & HOUSEHOLD

850050 TANSPORTATION – PERSONNEL

ADGAS


Page: 49/49

8.6 – CLEANING SERVICES 860005 CLEANING/PROTECTION OF CARPETS/UPHOLSTRY/CURTAINS

860010 CEANING – INTERNAL CLEANING OF BUILDINGS

860015 OUTDOOR CLEANING & ROAD SWEEPING

860020 CLEANING – HQ & COMPLEX

860030 CLEANING – PUBLIC HEALTH & PEST CONTROL

860035 JANITORIAL AND HYGIENE SERVICES

860040 CLEANING – SITE CLEARANCE/REMOVAL SERVICE

860045 LAUNDRY SERVICES

860050 EXTERNAL BUILDING CLEANING USING CRADLES

860060 WATER TANKS DOMESTIC (G.R.P., ETC.) –

CLEANING/REPAIR/REPLACEMENT/RENEWAL

860070 TANKERS FOR SEWAGE REMOVAL

8.7 – OTHER GENERAL SERVICES 870010 ADVERTISEMENT

870015 PHOTOGRAPHY AND VIDEOGRAPHY SERVICES

870020 AUCTIONING & MATERIAL DISPOSAL

870030 AUTOMATIC CONTROL DOORS & BARRIERS – INST. & MAINT.

870050 ACCESS CONTROL SYSTEMS – INST. & MAINT.

870060 DOCUMENT/OFFICE AUTOMATION SYSTEMS

870070 EDUCATION & SCHOOL MANAGEMENT.

870080 EDUCATION & TRAINING

870090 FIBRE GLASS PRODUCTS MAINTENANCE SERVICES

870100 INSULATION- ACOUSTIC ETC. FOR BLDGS.

870110 LANDSCPING/IRRIGATION WORKS

870120 LOCK – SMITHY SERVICES

870130 MARBLE SUPPLIERS AND FIXERS

870135 MEMBERSHIPS – CLUBS ETC.

870140 PAINTING SERVICES – BUILDINGS

870160 PRINTING & PUBLISHING

870170 SAFETY AND SECURITY – BUILDINGS

870180 SAND/RIGHT OF WAY CLEARING

870190 SPARY PAINTING OF HIGH QUALITY – OFFICES

870200 TECHNICAL DOCUMENTATION SERVICES

870205 TRANSULATION & LINGUISTIC SERVICES

870210 WATER TANKS LININGS – BUILDINGS

870230 COURIER SERVICES

870240 TRAVEL & TOURISM SERVICES

870250 SECURITY & SURVEILLANCE SERVICES

870260 STORAGE RACK/ SHELVES SYSTEM (SUPPLY & INSTALLATION)

870270 INDOOR PLANT (SUPPLY & CARE MAINTENANCE)