contractor pre-qualification questionnaire (ms word … document/pre... · web viewcontractor....

CONTRACTOR

PRE QUALIFICATION

QUESTIONNAIRE

ABU DHABI GAS LIQUEFACTION COMPANY LIMITED

Issued by:Support & Logistics Services Dept. Procurement & Contracts Division Issue Date: Oct/2012

http://www.adgas.com/EnglishView/index.cfm

ADGAS PRE-QUALIFICATION QUESTIONNAIREFOR CONTRACTORS

PagesContractor’s Name…………………………………………………………………….….. ... 3Guidelines………………………………………………………..……………………..……… 4 Check List………………………..…………………………………………………………..… 5 - 6 Section 1 General Information...........................................................

71.1. Company Information…………………………………………………… 81.2. Ownership, Authorised Person(s)………………………………………91.3. Certificates and Licenses……………….………………………………..101.4. Associated Companies... ... ... ... ... ... ... ... ... ... ... ... ... ... ... …101.5. Financial Information…………………………………………………… . 11

Section 2 Work Experience .................................................................122.0 PRE-QUALIFIED WITH ADNOC GROUP OF COMPANIES……….. 13 - Guidelines for Completing Section 2……………………………... ... 142.1 Work Categories ... ... ... ... ... ... ... ………………………………… . 152.2 List of Experience for the last 5 Years ... ... ... ... ... ... ... ... ... ...162.3 Licensor Position …………………………………………………………. 17

Section 3 Company Resources .......................................................... 183.1 Plant and Equipment …………………………………………………... 193.2 Technical Resources ……………………………………………….…... 20

Section 4 Orgainization and Quality Assurance .................................214.1 Organization & Human Resources……………………..…………... 224.2 Infrastructure…………………………………………………………….. 234.3 Quality Assurance Accreditions………………………………….... . 24-25

Page: 2/51

INDEX

PRE-QUALIFICATION QUESTIONNAIRE


Section 5 Company Declaration……………………………………………….... 26-27

Guidelines...................................................................................................... 29Contents.......................................................................................................... 30-31Work Category Descriptions............................................................................ 32

C O N T R A C T O R ' S N A M E

Page: 3/51

WORK CATEGORIES


This document is considered by the Company to be a very important one for evaluating suitability of an organization as a prospective Contractor. Hence you are requested to follow these guidelines for completing the Questionnaire:

1. Additional guidelines have been provided at the beginning of Section (2). A check list is also provided on the next page for you to ensure completeness of submittal.

2. The term “Contractor” used in this document denotes both contractors and Consultants.

3. All information shall preferably be typewritten and should be supported with appropriate documentation. This information is required to be updated by you every two to three years by submitting a fresh Pre-qualification Questionnaire.

4. Please attach additional sheets if the space provided for any information is insufficient. Write your Company’s ‘Short’ Name on each additional sheet, marking it with a reference number which should be entered in the Check List.

5. Every year copies of all renewed licenses and certificates (as per Sub-Section 1.3) must be submitted, without which your registration shall stand automatically cancelled.

6. All correspondence shall be addressed:Mr. Sultan Ebrahim A. Al-NeaimiHead of Support & Logistics Services DepartmentADGAS Head Office – 12th FloorCorniche RoadABU DHABI – U.A.E.

7. In case of difficulty in filling up the Questionnaire, please contact:

Vendor Registration Officers: Tel: +9712-6065882 or +9712-6065959

Logistics & Support Service Department Office Administrator: Tel: +9712-6065708, Fax: +9712-6061201

Senior Support Engineer Tel: +9712-6065618

Page: 4/51

GUIDELINES


8. There are 5 Sections to this Questionnaire, as under:

Section 1 : General InformationSection 2 : Work ExperienceSection 3 : Company ResourcesSection 4 : Organization & Quality AssuranceSection 5 : Company Declaration

Page: 5/51

Important Notes1. The completed documents are to be hand delivered to Registration Officer

in ADGAS Headquarters, 12th floor, who will check the documents and receive the same.

2. Prequalification documents sent through mail will not be accepted

3. Suppliers and Contractors to ensure that the documents are complete in all respects as mentioned in the website.

4. Incomplete submissions will be rejected, and ADGAS will not be responsible for such incomplete submissions.Documents submission time is from 09.00 to 12.00 hrs on all Mondays and Wednesdays.


SL. NO. DESCRIPTION

VENDORS CONFIRMATIO

NCOMPULSORY ATTACHMENTS

1. Covering letter from Local Contractor along with copy of their: Department of Economic Development Trade License Abu Dhabi Chamber of Commerce & Industry (ADCC&I)

Membership Registration Certificate.(Above Certificates must contain classification for Oil & Gas Field Services with minimum of 3 months validity).

“To whom It May Concern Certificate” from ADCC&I stating % of ownership.Note: Attach copy of above License/Certificates and their official English

Translation.2. Copy of financial statement audited by charted accountants for last 3 years. Or

internal financial statement if the company is established for less than one year.3. Worldwide & local experiences list including Name of Client, Scope of Work,

Value and Year of Project along with the related final Acceptance/Provisional Acceptance Certificates as applicable for the experiences entered within the Contractor’s screen (copies of contract to be attached).

4. Company Profile outlining key areas (1 or 2 pages).5. List of personnel under your company's visa issued by Ministry of Labour of

UAE Government, Abu Dhabi,6. Organization Chart along with CVs for the technical manpower with 5 years

minimum experience.7. Declaration templates and other provided templates to be filled up and attached

as applicable.8. Letters of approval from major international oil & gas producers.9. Copy of QA/QC manual along with implementation forms, checklists & certificates

applicable to QA/QC Management system.10. Copy of HSE manual along with implementation forms checklists & certificates.11. Contractor Classification from Planning Department, Abu Dhabi.12. Copy of ISO 9001 certification from an international certifying agency.13. Company catalogues/brochures, if any. 14. Banker’s reference letter(s).15. Customer reference letters.16. Any other documents which you may wish to enclose in support of this

prequalification (Please list below):---------------------------------------------------

17 Hard and softcopy of your pre qualification submission

18 Confirm that all Sections/Sub-sections applicable to you have been filled and evidence attached in the submission.

Notes : - Item Nos. 1 to 7 are compulsory for Contractors.- Item Nos. 8 to 13 are compulsory for Contractors, if applicable to the nature of work.- Item No. 14 to 16 optional.- The pre-qualification submission (dossier/softcopy) shall have all above compulsory attachments

arranged in serial order, with dividers/folders.

Page: 6/51

CHECK LIST


AUTHORISED SIGNATURES

SECTION 1GENERAL

INFORMATION

1.1 COMPANY INFORMATION

1.2 OWNERSHIP, AUTHORIZED PERSON(S)

1.3 CERTIFICATES AND LICENSES

1.4 ASSOCIATED COMPANIES

1.5 FINANCIAL INFORMATION

Page: 7/51


SECTION 1PAGE 1 OF 4

FULL NAME

SHORT NAME (IF ANY)

DATE ESTABLISHED

NATIONALITY

INCORPORATED IN ABU DHBAI OTHER EMIRATE WITHIN U.A.E

AGCC COUNTRY OTHER COUNTRY (AGCC = Arab Gulf Cooperation Council)

ADDRESSMAIN OFFICEIN ABU DHABI

STREETP.O. BOXTEL. NO.FAX NO. E-MAIL:

CORPORATE HEADQUARTERS

STREETP.O. BOXTEL. NO.FAX NO. E-MAIL:

OTHER ADDRESSES STREETP.O. BOXTEL. NO.FAX NO. E-MAIL:

HOME OFFICE (ONLY FOR CONSULTANTS/ ENGINEERS)

STREETP.O.BOXTEL. NO.FAX NO. E-MAIL:

CONTACT PERSONS: (Please include name of Chief Executive of the Company)NAME DESIGNATION TEL. NO. FAX NO. E-MAIL

Page: 8/51

SECTION 1 – GENERAL INFORMATION

SUB SECTION 1.1 – COMPANY INFORMATION



(A) LOCAL COMPANY

100% OWNED BY U.A.E.NATIONAL 51% OWNED BY U.A.E. NATIONAL

NAME OF OWNER(S) NATIONALITY % OF OWNERSHIP

(B) FOREIGN COMPANY

Is it a Branch in Abu Dhabi?

If yes, provide the composition of Board of Directors of Parent Company:

NAME POSITION NATIONALITY

Or, is it a Sponsored Company in Abu Dhabi? If Yes, please provide details of your Company’s Sponsor in Abu Dhabi:

NAME(S) OF SPONSOR(S) ADDRESS TEL.NO. FAX NO. E-MAIL

(C) AUTHORISED SIGNATORIES AS PER STATUTES/ARTICLES OF ASSOCIATION

NAME(S) DESIGNATION SPECIMEN SIGNATURE

SECTION 1Page: 9/51

SUB SECTION 1.2 – OWNERSHIP, AUTHORIZED PERSON(S)

NoYes

NoYes No

Yes No


PAGE 3 OF 4

(Please attach copies of Certificates/Licenses and their English Translation)

Classified for Oil & Gas Field Services? (The above classification is necessary for registration as a ‘contractor’)

Trade License from Department of Economic DevelopmentRegistration No. Date Of Registration Registration Expiry Date

Membership from Abu Dhabi Chamber Of Commerce & IndustryRegistration No. Date of Registration Registration Expiry Date

Industrial license(s) issued from U.A.E. Authorities, if anyIssuing Authority Registration No. Date of Registration Registration Expiry Date

Company classification with Planning Department, Abu Dhabi, If availableClassified For Category of Classification Date Issued

Name of Company Address Type of Association* For ADGAS use only

*Type of Association: W Wholly-Owned Subsidiary Co.P Partially Owned Subsidiary Co.I Independent Co., but under same Management

Page: 10/51

SUB SECTION 1.3 – CERTIFICATES AND LICENSES

NoYes

SUB SECTION 1.4 – ASSOCIATED COMPANIES



(All figures in Thousand Dirhams)

FULL NAME OF COMPANY

BALANCE SHEET INFORMATION (FOR THE LAST 3 YEARS) TURNOVER (FOR LAST 3 YEAR)YEAR YEAR GROSS

INCOMENET

INCOME

FIXED ASSETS

CURRENT ASSETS

CURRENT LIABILITIES

PAID UP CAPITAL

LONG TERM LIABILITIES

COMPANY’S AUDITORS

NAME ADDRESS

COMPANY’S BANKERSProvide Main Banker’s Name, Address & Credit Facilities

BANK/INSTITUTION NAME ADDRESS CREDIT FACILITIES

AMOUNT DETAILS/CONDITIONS

Page: 11/51

SUB SECTION 1.5 – FINANCIAL INFORMATION


SECTION 2

WORK EXPERIENCE

2.0 PRE-QUALIFIED WITH ADNOC GROUP OF COMPANIES

2.1 WORK GROUPS

2.2 WORK EXPERIENCE

2.3 LICENSOR POSITION

Page: 12/51


If your company is pre-qualified with any of ADNOC group of companies, please fill the following information and provide supporting documents including the capability certificates:

S. NO.

ADNOC COMPANY NAME

REGISTRATION NO. DETAILS OF / SERVICES PREQUALIFIED

Page: 13/51


SECTION 2 – EXPERIENCES

SUB SECTION 2.0 – PRE-QUALIFIED WITH ADNOC GROUP OF COMPANIES



The guidelines given below should be strictly followed in order to capture the information about your Company’s and it’s Associates’ experiences:

1. A list of Work Categories covering current areas of ADGAS’ interest is provided at the end of this Questionnaire. Please select those Work Categories which are relevant to your Company and provide your work experiences for the selected Work Category(s).

Note: You may also include a specialized service offered by you which is not covered in the list but, in your opinion, may be of interest to ADGAS.

2. List the Work Categories selected as per item (1) above, in sub-section 2.1.

3. Record each of your work experiences in a separate form. A specimen form is provided in Sub-section 2.2. Use photocopies of this form and give these copies serial numbers which should be entered in the column provided in Sub-section 2.1 in order to link your supporting experiences to the relevant Work Category(s). You may fill both your “completed” as well as “current ongoing” contracts in separate forms.

4. First record the jobs directly handled by your company. You may also record a few very important jobs handled through your Associated Companies. In such a case, in the column “Name of Contractor” in the Work Experience form, please write the name of you Associate Company instead of your Company’s name.

5. You may record as many Work Experiences as you desire to support your application. However 4 or 5 most recent and major contracts for each ‘Work Category’, preferably from Oil & Gas Industry, will be considered the minimum requirement. Jobs with ADGAS/ADNOC Group of companies followed by those undertaken in Abu Dhabi/U.A.E. should be priority listed.

6. The description of Work Experience must identify the key areas of the work executed by your Company and extent of your direct involvement such as:

Turnkey Projects including Engineering Design, Supply, Erection and Supervision.

Maintenance/Installation/Commissioning works including Supply of Manpower.

Consultancy Services, i.e. Engineering Design, Study and Reports

Or, Construction work only.

7. Under ‘Contract Value’, specify the value of works executed directly by your Company including your sub-contractors.

8. Sub-section 2.3 to be completed only if your Company is a process licensor.

Page: 14/51

GUIDELINES FOR COMPLETING SECTON 2

SECTON 2 – WORK EXPERIENCE



Please record below the Work Categories relevant to your Company’s operations as selected from a List provided at the end of this Questionnaire:

S. NO. WORK CATEGORY NO. NAME OF WORK CATEGORIESWORK

EXPERIENCE FORM NO.

Record any other specialized services offered, which are not included in the above List:

S.NO.

SERVICES OFFERED REMARKS, IF ANY

Page: 15/51

SUB SECTON 2.1 – WORK CATEGORIES


CONTRACTOR'S NAME : CONTRACTOR REGISTRATION NO.

WORK CATEGORY (WC) DESCRIPTION WORK CATEGORY CODE

S. NO.

1

PROJECT TITLE

2

CLIENT

3

SCOPE OF WORK

4

ROLE IN PROJECT

5

YEAR

6

TOTAL JOB VALUE (DHS)

7

VALUE FOR THIS WC (DHS)

8

Column No. 8 - This value should reflect the relevant portion of the total job which relates directly to the concerned work Category/Service for which this from is being filled, e.g., if your total job value is Dhs.1 Million and out of this the relevant Work Category/Service is only Dhs.50,000 then write Dhs.50,000 in this column.

Note: Please include ongoing jobs on a separate copy of this form.

Provide relevant document (copies of Work order/ Service Order or Completion Certificate or Experience certificate) for each category.

Page: 16/51

PROCUREMENT DIVISIONSUPPORT SERVICES DEPARTMENT - REGISTRATION

LIST OF EXPERIENCE FOR THE LAST 5 YEARS

SECTION 2PAGE 4 OF 5SUBSECTION 2.2 - WORK EXPERIENCE



Please list processes relevant to the Hydrocarbon/Petrochemical/General Chemical/Process Industry for which your organization holds proprietary rights available to ADGAS under a licensing arrangement:

PROCESS (NAME) PURPOSE NO. OF UNITS ON STREAM

TYPICAL CAPACITY

Page: 17/51

SUB SECTION 2.3 – LICENSOR POSITION


SECTION 3

COMPANY RESOURCES

3.1 PLANT AND EQUIPMENT

3.2 TECHNICAL RESOURCES

Page: 18/51



Summarize your fixed/mobile Plant and Equipment in U.A.E. which are in good working order and provide a similar list for Plant and Equipment outside U.A.E., as a separate attachment.S.

NO.PLANT/EQUIPMENT AND

ITS MANUFACTURER/ MAKE

QTY. CAPACITYYEAR

OF MFR.

LOCATION OWNED/HIRED REMARKS

Page: 19/51

SUB SECTION 3.1 – PLANT AND EQUIPMENT

SECTON 3 – COMPANY RESOURCES



(A) Please provide a brief write-up on how planning, Procurement, Construction and Management of client projects are handled, emphasizing on Procurement, Manpower Planning and its deployment, Project Monitoring & Control, Quality Control and Safety aspects.

NOTES:1. To be provided by Companies seeking prequalification for Project Engineering, Project

Management and similar jobs/services.

2. Please use separate sheets and confirm by ticking the box, if attached.

(B) BACK-UP SERVICES: Please summarize all back-up services you have, to support your prime business.

ENGINEERING & DESIGN WORKSHOPS & FABRICATION

TESTING, COMMISSIONING & OTHER SPECIALIZED

SERVICES

Page: 20/51

SUB SECTION 3.2 – TECHNICAL RESOURCES


SECTION 4ORGANIZATION AND QUALITY ASSURANCE

4.1 ORGANIZATION & HUMAN RESOURCES

4.2 INFRASTRUCTURE

4.3 QUALITY ASSURANCE ACCREDITIONS

Page: 21/51



List below, by category of specialization, the number of personnel employed, indicating whether they represent core “permanent” employees or “hired” ones:

Please attach list of your manpower under yours company’s visa issued by Ministry of Labour of UAE Government, Abu Dhabi.Permanent : Under your Abu Dhabi company’s visaHired : Not under your Abu Dhabi company’s visa Abu Dhabi.

CATEGORY OF SPECIALIZATIONTOTAL NUMBER

PERMANENT HIREDUAE Notional* Others

ArchitectsChemical EngineersCivil Engineers and SupervisorsCoded Welders (for Pressure Welding)Commissioning EngineersContract/Project ManagementDesign/Drawing PersonnelElectrical EngineersEstimating EngineersInstrument EngineersMachinery EngineersMechanical EngineersMetallurgistsProduction/Control EngineersPurchasing PersonnelQA/Inspection and Test PersonnelResearch & Development PersonnelSafety PersonnelSales PersonnelValves & Piping EngineersWelding EngineersProcess Safety EngineerStatic Equipment EngineerSub-Sea Pipeline EngineerOthers (Please Specify)

* Please provide evidence documents issued or endorsed by the UAE Governmental Authority for all UAE nationals permanently employed by your company.

SECTION 4

Page: 22/51

SECTION 4 – ORGANIZATION AND QUALITY ASSURANCE

SUB SECTION 4.1 – ORGANIZATION & HUMAN RESOURCES


PAGE 2 OF 4

Please enclose the following Organization Charts:

Organization Chart for your Local Office in Abu Dhabi

Organization Chart for your Corporate Office

Organization Chart for your Home Office (if different from your Corporate Office)

Please enclose the following document and tick the box to confirm:

(i) SPACE (Please specify the space occupied, in square metres)

Offices Warehouses Workshops/Plants

Showrooms Laboratories Others……

(ii) COMPUTERS/OFFICE AUTOMATION (Please specify the Facilities available)

No. of Computers No. of other Hardware such as Printers/Plotters, etc.

Do you use AUTOCAD or similar program?

Please list application software used/available with you including the ones for Project Planning/Control functions and for Engineering Design:

_____________________________________________________________________________________________________

_____________________________________________________________________________________________________

____________________________________________________________________________________Please describe very briefly, communication network(s)/facilities available, such as Modems, Electronic Mail, Telefax, etc.:

____________________________________________________________________________________

____________________________________________________________________________________

____________________________________________________________________________________

____________________________________________________________________________________

Page: 23/51

SUB SECTION 4.1 – ORGANIZATION & HUMAN RESOURCES (Cont.)

NoYes

SUB SECTION 4.2 – INFRASTRUCTURE

NoYes

NoYes

NoYes



Please tick the appropriate box and provide required information:

1. Do you have a formally documented Quality System?

2. Do you have a QA Manual?

If yes, specify National/International Standard to which

It is developed.

3. Does your QA System meet the requirements of ISO 9000 Series/Bs 5750 (All Parts)/other internationally recognized QA System?

If yes, please specify which parts, and what system.

4. Is your QA System approved by any inspection/certifying agency Or by any large well-known company, viz. Lloyds, TUV, etc. or aMajor Oil Company?

If yes, specify which ones.

5. Do you have HSE Manual? Do your company documents & Implement HSE System?Does your HSE System meet the requirement of ISO 14000 or

Other internationally recognized HSE System?

6. Specify any Engineering, Fabrication and Chemical Production

Tests/Codes/Standards employed.

7. Specify any Code Construction Authority possessed by you.

8. Can you provide training facilities at site?

If yes, please describe briefly.

Page: 24/51

SUB SECTION 4.3 – QUALITY ASSURANCE ACCREDITIONS

NoYes

NoYes

NoYes

NoYes

NoYes

NoYes



Please summarize QA accreditions of your Company and its Associate company, if any:

NAME OF COMPANY AND ITS

ASSOCIATED COMPANIES

ISO OR EQUIVALENT STANDARDS

(Please Specify)

NOTE: Please attach copy of QA Certificate(s) and copy of QA Manual(s).

If your company is not certified yet, but is going through the certification process, specify the name of Agency employed, if any, and approximate certification completion time:

(Please attach a letter from the Agency confirming the above).

_____________________________________________________________________________________________________

_____________________________________________________________________________________________________

_____________________________________________________________________________________________________

_____________________________________________________________________________________________________

Page: 25/51

SUB SECTION 4.3 – QUALITY ASSURANCE ACCREDITIONS (Contd.)


SECTION 5

COMPANY DECLARATION

Page: 26/51


We hereby declare and undertake that all the information/documents provided are

under our full legal responsibility and confirm that we indemnify and hold ADGAS

harmless against any claim or liability arising from the acceptance or use of such

information/documentation whatever the source of such claim or liability.

We also authorize ADGAS to verify and seek any way of confirmatory of such

information/documents.

We acknowledge that submission of this Questionnaire does not give us any right

whatsoever to be invited to tender for any work being so tendered by ADNOC.

We undertake to inform Company of any changes and will periodically

update/confirm (at least yearly) all items of supplied information.

SignatureFull NameDesignationOn Behalf OfDate

Company stamp

Note: Official Authorization /Power of Attorney from the owner to the above signed should be attached

Page: 27/51

DECLARATION


\

Page: 28/51

WORK CATEGORIES

GUIDELINES


Please follow the two steps given below to select Work Categories Codes to identify your company’s services for which you wish to pre-qualify:

Step – 1 Select the Main Group Number from the following table which focuses on nature of your main activities, as per your Licences:

Main Group No.

Nature of Main Activity

1.0

2.0

3.0

4.0

5.0

6.0

7.0

8.0

Consultancy/Engineering

EPC, EPCM & Construction Works for Major Projects

Minor Construction & Plant Operation/Maintenance related Works

Information Technology related Services

Personnel & Manpower Supply/Services

Finance related Services

Marketing related Services

Domestic/Building related and other General Services

Step – 2 After selecting the applicable Main Group Numbers from above table, go to the “List of Work Categories” and define your Company’s activities/specialization which can be supported with your experience/references.

Notes: 1. The term “Contractor” includes Contractor and Consultants.

Page: 29/51C O N T E N T S


GROUP DESCRIPTION1.0 PROJECTS & PLANT CONSULTANCY/ENGINEERING

1.1 PROJECT CONSULTANCY/ENGINEERING1.2 OPERATING PLANT CONSULTANCY

2.0 CONSTRUCTION WORKS (MAJOR PROJECTS)2.1 EPC CONTRACTS – MULTI DISCIPLINE2.2. EPCM CONTRACTS – MULTI DISCIPLINE2.3 CIVIL WORKS2.4 MECHANICAL WORKS2.5 PIPELINE WORKS2.6 ELECTRICAL WORKS2.7 INSTRUMENTATION & TELECOM. WORKS2.8 GENERAL CONTRACTS (MAJOR PROJECTS)

3.0 PLANT OPERATION & MAINTENANCE3.1 CIVIL WORKS/MAINTENANCE3.2 MECHANICAL PLANT/EQUIPMENT WORKS/MAINT. 3.2.1 Turbine – Maintenance 3.2.2 Pumps, Compressors, Other Rotating Eqpt. - Maintenance 3.2.3 Processing Plant & Equipment - Maintenance 3.2.4 Boilers, Furnaces & Reactors - Maintenance 3.2.5 Heat Exchangers - Maintenance 3.2.6 Material Handling Equipments - Maintenance 3.2.7 Plant Maintenance/Overhaul/Shutdown Services 3.2.8 Other Mechanical Plants - Maintenance3.3 PIPING, COLUMNS AND TANKS - MAINTENANCE 3.3.1 Piping - Maintenance 3.3.2 Columns, Tanks, Vessels & Others - Maintenance3.4 ELECTRICAL PLANT & EQUIPMENT – MAINT. 3.4.1 Motors & Generators - Maintenance 3.4.2 Sub-stations, Switch Gears & Transformers - Maintenance 3.4.3 Cables, Transmission & Distribution - Maintenance 3.4.4 Other Electrical Plant & Equipment - Maintenance3.5 INSTRUMENTATION & TELECOM. SYSTEM – MAINT.3.6 INSPECTION/TESTING/COMMISSIONING SERVICES 3.6.1 Inspection & Testing Services 3.6.2 Commissioning Services3.7 GENERAL PLANT SERVICES 3.7.1 Hiring Services - Plants 3.7.2 Painting Services - Plants 3.7.3 Plant Cleaning Services 3.7.4 Other Plant Operation/Maintenance Services

GROUP DESCRIPTION

Page: 30/51


4.0 INFORMATION SYSTEMS & TECHNOLOGIES5.0 PERSONNEL & MANPOWER SERVICES

5.1 MANPOWER SUPPLY - ENGINEERS5.2 MANPOWER SUPPLY – SUPERVISORS/TECHNICIANS5.3 MANPOWER SUPPLY – NON TECHNICL PERSONNEL5.4 OTHER PERSONNEL CONTRACTS/SERVICES

6.0 FINANCE SERVICES 7.0 MARKETING SERVICES8.0 ADMINISTRATION & GENERAL SERVICES

8.1 CATERING SERVICES8.2 LEASING SERVICES –8.3 MEDICAL & HSE SERVICES8.4 OFFICES, BUILDINGS & VILLAS MAINTENANCE8.5 TRANSPORTATION SERVIES8.6 CLEANING SERVICES8.7 OTHER GENERAL SERVICES

Page: 31/51


WC CODE WORK CATEGORY (WC) DESCRIPTION.

GROUP 1.0 PROJECTS & PLANT CONSULTANCY/ ENGINEERING Sub- Group 1.1 covers Front end engineering and design (FEED), Basic engineering, Detailed Engineering, Project Management/ Consultancy for major project.

1.1- PROJECT CONSULTANCY/ ENGINEERING 110010 ADVANCED PROCESS CONTROL (CONSULTANCY/ENGINEERING)110020 AERIAL SURVEYS (CONSULTANCY/ENGINEERING)110030 ARCHITECTURE & INTERIOR DECORATION. (CONSULTANCY/ENGINEERING)110040 CATHODIC PROTECTION SYSTEMS (CONSULTANCY/ENGINEERING)110050 CHEMICAL INJECTION SYSTEM (CONSULTANCY/ENGINEERING)110060 CIVIL & STRUCTURAL(INDUSTRIAL) (CONSULTANCY/ENGINEERING)110070 CIVIL & STRUCTURAL (NON INDUSTRIAL) (CONSULTANCY/ENGINEERING)110080 COLD INDUSTRIAL INSULATION (CONSULTANCY/ENGINEERING)110085 CONCEPTUAL DESIGN (CONSULTANCY/ENGINEERING)110090 DE-SALINATION /WATER TREATMENT (CONSULTANCY/ENGINEERING)110100

ENVIRONMENTAL ENGG.(POLLUTION CONTROL/EFFLUENT TREATMENT)

(CONSULTANCY/ENGINEERING)110110 FRONT END ENGINEERING DESIGN (FEED) (CONSULTANCY/ENGINEERING)110115 OPTIMIZATION STUDIES (CONSULTANCY/ENGINEERING)110117 SPECIAL STUDIES/ DESIGN (CONSULTANCY/ENGINEERING)110120 GAS PROCESSING (CONSULTANCY/ENGINEERING)110125 OIL & GAS PLANT ONSHORE - EPCM (CONSULTANCY/ENGINEERING)110130 GAS/OIL PRODUCTION – OFFSHORE (CONSULTANCY/ENGINEERING)110135 GAS/OIL PRODUCTION – ONSHORE (CONSULTANCY/ENGINEERING)110140 GAS/TREATMENT EQUIPMENT (CONSULTANCY/ENGINEERING)110150 GAS/OIL GATHERING CENTERS (CONSULTANCY/ENGINEERING)110160

ELECTRICAL/ INSTRUMENTATION AND CONTROL SYSTEMS

(CONSULTANCY/ENGINEERING)110165 LANDSCAPING (CONSULTANCY/ENGINEERING)110167 LNG/ LPG TANKS SYSTEMS/OIL PLANT (CONSULTANCY/ENGINEERING)110168 LUBE OIL PLANT (CONSULTANCY/ENGINEERING)

Page: 32/51


110170 MANAGEMENT INFORMATION SYSTEMS (CONSULTANCY/ENGINEERING)110180 MARINE ENGINEERING (CONSULTANCY/ENGINEERING)110190 MARINE SURVEYS (CONSULTANCY/ENGINEERING)110200 MATERIAL SELECTION FOR CORROSION CONTROL (CONSULTANCY/ENGINEERING)110210 ONSHORE SURVEYS (CONSULTANCY/ENGINEERING)110215 OFFSHORE SURVEYS (CONSULTANCY/ENGINEERING)

110220 PACKAGED PROCESS MODULE (CONSULTANCY/ENGINEERING)110230 PETROCHEMICAL PLANT (CONSULTANCY/ENGINEERING)110240 PETROLEUM REFINERY (CONSULTANCY/ENGINEERING)110245 PETROLEUM REFINERY AROMATIC (CONSULTANCY/ENGINEERING)110250 PIPELINE – OFFSHORE (OIL & GAS) (CONSULTANCY/ENGINEERING)110260 PIPELINE – ONSHORE (OIL & GAS) (CONSULTANCY/ENGINEERING)110265 PIPELINE – ONSHORE (EPCM) (CONSULTANCY/ENGINEERING)

WC CODE WORK CATEGORY (WC) DESCRIPTION.110270

POWER GENERATION, TRANSMISSION & DISTRIBUTION

(CONSULTANCY/ENGINEERING)110280 PROCESS LICENSORS (CONSULTANCY/ENGINEERING)110290

PROJECT MANAGEMENT CONSULTANCY(PMC) – INDUSTRIAL

(CONSULTANCY/ENGINEERING)110295

PROJECT MANAGEMENT CONSULTANCY(PMC) – NON-INDUSTRIAL

(CONSULTANCY/ENGINEERING)110300 QUALITY CONTROL (CONSULTANCY/ENGINEERING)110305 SCADA SYSTEM (CONSULTANCY/ENGINEERING)110310 SOIL INVESTIGATION - OFFSHORE (CONSULTANCY/ENGINEERING)110320 SOIL INVESTIGATION – ONSHORE (CONSULTANCY/ENGINEERING)110325 SULPHUR RECOVERY/ FORMING & HANDLING (CONSULTANCY/ENGINEERING)110330 TELECOMMUNICATION NETWORK AND TELEMETRY (CONSULTANCY/ENGINEERING)110333 TECHNO – ECONOMIC FEASIBILITY STUDY (CONSULTANCY/ENGINEERING)110335 TOWN PLANNING/MASTER PLAN (CONSULTANCY/ENGINEERING)110340 WATER INJECTION SYSTEMS (CONSULTANCY/ENGINEERING)

Page: 33/51


110345 GAS INJECTION SYSTEMS (CONSULTANCY/ENGINEERING)110350 WATER SUPPLY/ DISTRIBUTION NETWORK (CONSULTANCY/ENGINEERING)110360 SEWAGE/ DRAINAGE NETWORKS (CONSULTANCY/ENGINEERING)110365 FIRE & GAS (CONSULTANCY/ENGINEERING)110370 HVAC (CONSULTANCY/ENGINEERING)110375 DRAFTING & AS-BUILT DRAWINGS (CONSULTANCY/ENGINEERING)110380

ENG. DESIGN OF PROCESS FURNCES &FIRED HEATERS

(CONSULTANCY/ENGINEERING)110385 ASSET INTEGRITY MANAGEMENT SYSTEM (CONSULTANCY/ENGINEERING)110390 HYDRAULIC MODELLING (CONSULTANCY/ENGINEERING)

110395 HYDRODYNAMIC MODELLING (CONSULTANCY/ENGINEERING)

110400 SWIMMING POOL MAINTENANCE SERVICES (CONSULTANCY/ENGINEERING)

Page: 34/51


GROUP 1.0 PROJECTS & PLANT CONSULTANCY/ ENGINEERING SUB- GROUP 1.2SUB- GROUP 1.2CONVERS OPERATING PLANT, CONSULTANCY SERVICES

1.2 OPERATING PLANT CONSULTANCY 120010 AIR CONDITIONING & ELECTRO MECHANICAL – DOMESTIC/INDUSTRIAL120020 CONCRETE REHABILITATION STUDIES 120030 CORROSION AUDIT/ SURVEYS120040 ENERGY CONSERVATION STUDIES120060 FIELD TESTING OF NEW APPLICATIONS120070 FIRE & SAFETY CONSULTANCY120080 INDUSTRIAL ENGINEERING/ PRODUCTIVITY STUDIES 120081 ISO 14000/ QC SYSTEM & PROCEDURES120082 ISO 9000/QC SYSTEM & PROCEDURES120083 ISO 9000/ QC CERTIFICATION 120084 ISO 14000/ QC CERTIFICATION120085 MATERIAL MANAGEMENT CONSULTANCY120090 MECH PLANT & MATERIAL HANDLING SYSTEM - OFFSHORE120100 MECH PLANT & MATERIAL HANDLING SYSTEM - ONSHORE120110 NOISE SURVEYS & ANALYSIS120115 OPERATING PROCEDURES – PLANT OPERATION / MAINT120120 PLANT INSPECTION CONSULTANCY SERVICES120130 PLANT OPERATION STUDIES (RELIABILITY, PERFORMANCE, FAILURE ETC.)120140 PLANT SURVEYS – MECHANICAL/ ELECTRICAL120150 PRESERVATION STUDIES & SERVICES – EQUIPMENT & SPARES120160 RISK / HAZARD / SAFETY STUDIES120165 ACCIDENT, DAMAGE INVESTIGATION CONSULTANCY120170 SECURITY RELATED CONSULTANCY 120190 STUDIES ON CONSTRUCTION MATERIAL AND TESTING LABORATORY120200 TECHNICAL AUDIT / SURVEYS 12022 VIBRATION SURVEYS OF ROTATING EQUIPMENT

Page: 35/51


0120230 WASTE CONTROL / EFFLUENT TREATMENT 120240 STRUCTURAL STEEL FRAME ANALYSIS

GROUP 2.0 CONSTRUCTION WORKS (MAJOR PROJECTS) SUB- GROUP 2.1 COVERS EPC AND SUB-GROUP2.2 COVERS EPCM CONTRACT FOR MAJOR PROJECTS: 2.1- ENGINEERING, PROCUREMENT & CONSTRUCTIONS (EPC) CONTRACTS. 210010 DESALINATION UNITS- EPC210015 LNG/ LPG SYSTEM – EPC210020 MARINE WORKS – EPC210025 NITROGEN/ OXYGEN PLANTS - EPC210030 OIL & GAS PLANTS – OFFSHORE- EPC210040 OIL & GAS PLANTS – ONSHORE- EPC210050 PETRO- CHEMICAL PLANTS - EPC210060 PIPELINES OFFSHORE – EPC210070 PIPELINES ONSHORE - EPC210080 POWER GENERATION PLANTS – EPC210090 TANK FARMS – EPC210100 UNLEADED GASOLINE PRODUCTION PLANT - EPC

2.2- ENGINEERING, PROCUREMENT & CONSTRUCTIONS MANAGEMENT (EPCM) CONTRACTS

220010 MARINE WORKS – EPCM220020 OIL & GAS PLANTS OFFSHORE – EPCM220030 OIL & GAS PLANTS ONSHORE – EPCM220040 PETRO-CHEMICAL PLANTS - EPCM220050 PIPELINES OFFSHORE – EPCM220060 PIPELINES ONSHORE - EPCM220070 POWER GENERATION PLANTS – EPCM

SUB-GROUP 2.3 TO 2.8 COVER CONSTRUCTION WORK FOR ALL ENGINEERING DISCIPLINES FOR MAJOR PROJECTS:

Page: 36/51


2.3 CIVIL WORKS230010 BRIDGES230020 BUILDINGS, OFFICES, ETC – CONSTRUCTION230030 CEILING AND INTERNAL PARTITIONS WORKS230035 DRAINAGE / SEWERAGE WORKS230040 DREDGING/ RECLAMATION – OFFSHORE230050 INDUSTRIAL CIVIL WORKS230055 INFRASTRUCTURE WORKS230060 INTERIOR DECORATION WORKS230070 MARINE CONSTRUCTION – JETTY, HARBOUR ETC. 230080 OFFSHORE ENGG. & CONSTRUCTION 230090 PILING / SHEET PILING230095 PRE-ENGINEERING BUILDINGS/ STEEL STRUCTURE.230100 ROADS/ CULVERTS WORKS230110 SEA WATER INTAKE230120 SITE PREPARATION WORKS 230130 SOIL/ FOUNDATION GROUTING230140 STEEL STRUCTURAL WORKS- ERECTION230145 STEEL STRUCTURAL WORKS – FABRICATION 230150 TUNNELING/ NON- DESTRUCTIVE ROAD CROSSINGS. 230155 HORIZONTAL DIRECTION DRILLING “HDD”230160 WATER SUPPLY NETWORKS WORKS230165 SEAWATER INTAKE / OUTFALL CONSTRUCTION230170 GROUND COMPACTION (VIBRO-COMPACTION)


230175 PIPLINE POTECTION WORKS230180 MODULAR CONSTRUCTION - PAU's(PRE-ASSEMBLED UNIT)230185 MODULAR CONSTRUCTION -PAR's (PRE-ASSEMBLED RACKS)230190 MODULAR CONSTRUCTION - BUILDINGS230195 JACKET INSTALLATION230200 SWIMMING POOL CONSTRUCTION230205 WATER FEATURES WORKS (e.g. LAGOONS,FOUNTAINS,WATER FALLS LAZY RIVERS etc.)

2.4 MECHANICAL WORKS240010 ARCHITECTURAL FIRE WALLS / ACCOMMODATION MODULES240020 CRANE / OVERHEAD BRIDGE – ERECTION 240030 DESALINATION UNITS – ERECTION240040 EFFLUENT TREATMENT PLANTS240045 ENVIRONMENTAL RELATED WORKS ( POLLUTION CONTROL/MONITORING, ETC) 240050 FABRICATION WORKS- GENERAL240060 HV & AC WORKS- INDUSTRIAL240065 AIR-CONDITIONING – HIGH RISE BUILDINGS (CENTRAL CHILLED WATER SYSTEMS)

SUPPLY & INSTALLATION.240070 LPG/ LNG TANKS- ERECTION240075 FLOATING ROOF TANK ERECTION240080 MECHANICAL EQUIPMENT - ERECTION240090 MOLTEN SULPHUR TANKS 240095 SULPHUR RECOVERY / FORMING & HANDLING PLANT - ERECTION240100 OIL & GAS PLANTS – ERECTION240110 PLATFORMS ERECTION – OFFSHORE240120 POWER STATIONS – ERECTION.240130 SITE WORK – TANK FORMS/FLOATING ROOF

Page: 37/51


240135 MARINE WORK – STEEL JETTY ETC.240140 TELECOM TOWERS240145 WATER PUMPING STATION - ERECTION240148 SEWERAGE PUMPING STATION - ERECTION240150 WATER TREATMENT PLANT WORKS.240155 GENERAL FABRICATION OF STRUCTURAL,SKIDS,PIPESPOOLING,PLATFORM240160 FLARE TOWER ERICTION

2.5 PIPELINE WORKS250010 CEMENT LININGS OF PIPES 250020 COLD & CRYOGENIC INSULATION WORKS250030 FIRE FIGHTING SYSTEMS – PIPING 250040 PIPELINES - INSULATION WORK250050 PIPELINES – COATINGS (FBE/ PE)250051 PIPELINES – COATINGS PP (POLYPROPYLENE)250052 PIPELINES – COATINGS & WRAPPING (COAL TAR/ BITUMEN ENAMEL)250055 PIPELINES – CONCRETE COATING250060 PIPELINES – FIELD JOINT COATING 250065 PIPELINES – TIE-INS250070 PIPELINES – CONSTRUCTION - OFFSHORE250080 PIPELINES – CONSTRUCTION – ONSHORE250090 SANDBLASTING & PAINTING WORKS


2.6 – ELECTRICAL WORKS260005 BUILDING MANAGEMENT SYSTEMS260010 CATHODIC PROTECTION SYSTEMS WORKS260020 ELECTRICAL WORKS – INDUSTRIAL 260030 ELECTRO-MECHANICAL (BUILDINGS/DOMESTIC)260045 CABLE LAYING AND TRENCH EXCAVATION260050 CABLE LAYING – SUBMARINE 260055 STREET LIGHTING & ACCESSORIES260060 POWER TRANSMISSION/DISTRIBUTION – OVERHEAD

2.7 – INSTRUMENTATION & TELECOM. WORKS270010 FIRE AND SAFETY WORKS270020 INSTRUMENTATION & CONTROL WORKS – INDUSTRIAL270030 TELECOMMUNICATION WORKS

2.8- GENERAL CONTRACTS (MAJOR PROJECTS)280010 CAMP CATERING FOR MAJOR PROJECTS - ONSHORE280015 CAMP CATERING - OFFSHORE280020 CERTIFICATION (DESING/STATUTORY REQUIREMENTS)280025 SHIP CLASSIFICATION280030 FREIGHT FORWARDING & CLEARING- MAJOR PROJECTS

Page: 38/51


280040 LAND TRANSPORTATION280042 HEAVY LIFT TRANSPORTATION SERVICES 280045 TRANSPORTATION – AGGREGATE, SAND, ROCKS, ETC280050 LOCAL SEA TRANSPORTATION 280055 INTERNATIONAL SEA TRANSPORTATION280060 MARINE SUPPORT SERVICES – CHARTER HIRE280065 JACK UP BARGE HIRE280070 NDT-RADIOGRAPHIC, ULTRASONIC ETC280075 NDT-RADIOGRAPHIC DIGITIZATION280080 THIRD PARTY INSPECTION

Page: 39/51


GROUP 3.0 PLANT OPERATION & MAINTENANCE Group 3 covers Plant, maintenance, rehabilitation, refurbishment; minor construction works for plant operation, covering all engineering disciplines.

3.1 – CIVIL WORKS/ MAINTENANCE310010 ALUMINIUM & GLASS WORKS310020 BUILDING CONSTRUCTION- MINOR310022 BUILDING MAINTENANCE 310024 BUILDING MAINTENANCE/ SERVICE AGREEMENTS310030 CONCRETE – PRECAST310032 CONCRETE – PRESTRESS310035 GRC – GLASS REINFORCED 310040 CONCRETE REHABILITATION WORK310045 CONCRETE – READY MIX310050 DEMOLITION310060 DRAINAGE/SEWERAGE – MINOR WORKS310070 EARTHWORK310080 FENCING AND GATES310085 GUNITING/SHORTCRETING SERVICES310090 MARINE – REHABILITATION310095 MASONRY WORKS310100 ROAD MAINTENANCE/REPAIRS310110 SOIL RECLAMATION310115 SOIL TREATMENT/CLEANING/STERILISATION310120 SOIL CONTAINMENT/STABILIZATION310130 SPECIALIST CONSTRUCTION (GLAZING, DOMES, SHELLS ETC.)310140 FABRICATION (GENERAL) STEEL STRUCTURE- MINOR WORKS.310150 WATER PROOFING WORKS310160 HOT DIP GALVANIZATION WORKS310170 AERIAL SURVEY WORKS

3.2 – MECHANICAL PLANT/EQUIPMENT WORKS/MAINT.3.2.1- TURBINES- MAINTENANCE

321010 TURBINES – GAS321020 TURBINES – SOLAR321030 TURBINES – STEAM321040 TURBINES MAJOR COMPONENTS RECONDITIONING & REPAIRS321050 INSPECTION, OVERHAUL/ REPAIR, REFURBISHMENT OF COMPONENTS. - GE FRAME 5

3.2.2- PUMPS, COMPRESSORS, OTHER ROTATING EQPT.- MAINT.322010 AIR BLOWERS322020 PUMPS OVERHAUL – OTHER THAN CRYOGENIC322025 PUMPS OVERHAUL – CRYOGENIC (LNG/ LPG/ OTHER LIQUID GASES)322030 COMPRESSORS OVERHAUL 322040 DIESEL ENGINES OVERHAUL 322050 GAS COMPRESSOR STATIONS OVERHAUL 322080 ROTATING EQUIPMENT – OTHERS322090 ROTOR BALANCING.

Page: 40/51


3.2.3- PROCESSING PLANT & EQUIPMENTS- MAINTENANCE 323010 FILTERS- AIR/PROCESS323030 FUEL FILTRATION EQUIPMENTS 323040 PROCESS EQUIPMENTS323050 REFINERY PLANTS INCLUDING REVAMPING WORKS323060 SULPHUR FORMING PLANTS323070 SULPHUR HANDLING PLANTS323080 SULPHUR RECOVERY PLANT 323090 WATER TREATMENT PLANTS – CLEAN WATER (FEED)323100 WATER TREATMENT PLANTS – DIRTY WATER/ EFFLUENT

3.2.4- BOILERS, FURNACES &REACTORS – MAINTENANCE 324010 BOILERS AND H.R.B.324020 HEATERS & DRYERS324040 FURNACE 324060 REACTORS324070 REFRACTORY LININGS- BOILERS, FURNACES ETC.324080 BOILERS, H.R.B. & PRESSURE VESSELS - OVERHAUL / REPAIR

3.2.5 – HEAT EXCHANGERS – MAINTENANCE325010 HEAT EXCHANGERS – REFURBISHMENT 325020 HEAT EXCHANGERS MAINT. – BUNDLE REFURBISHMENT325030 HEAT EXCHANGERS MAINT – CHEMICAL CLEANING325040 HEAT EXCHANGERS MAINT. – MECHANICAL CLEANING325050 HEAT EXCHANGERS MAINT. – WATER JETTING

3.2.6- MATERIAL HANDLING EQUIPMENTS- MAINTENANCE 326010 MATERIAL HANDLING SYSTEMS: CONVEYERS, BELTS ETC326020 EARTH MOVING EQUIPMENT - MAINTENANCE326030 LOADING ARMS.

3.2.7- PLANT MAINTENANCE/OVERHAUL/SHUTDOWN SERVICES327010 PLANT OVERHAUL/SHUTDOWN MAINTENANCE (MAIN CONTRACTOR) 327020 PLANT OVERHAUL/SHUTDOWN SERVICES – ELECTRICAL EQUIPMENT327030 PLANT OVERHAUL/SHUTDOWN SERVICES – MAJOR MACHINERY327040 PLANT OVERHAUL/SHUTDOWN SERVICES – ROTATING EQUIPMENT327050 PLANT OVERHAUL/SHUTDOWN SERVICES – HP POWER JETTING327060 PLANT OVERHAUL/SHUTDOWN SERVICES – CLADDING/INSULATION327070 PLANT OVERHAUL/SHUTDOWN SERVICES – PAINTING327080 PLANT OVERHAUL/SHUTDOWN SERVICES – INSTRUMENTATION327090 PLANT OVERHAUL/SHUTDOWN SERVICES – HEAT EXCHANGER RETUBING327100 PLANT OVERHAUL/SHUTDOWN SERVICES –EXCHANGER BUNDLE PULLING327110 PLANT OVERHAUL/SHUTDOWN SERVICES –PIPING FABRICATION327120 PLANT OVERHALL/SHUTDOWN SERVICES- CATALYST REPLACEMENT

3.2.8- OTHER MECHANICAL PLANTS – MAINTENANCE328010 AIR COOLER CLEANING

Page: 41/51


328030 FLARE SYSTEMS & BURN PITS328040 HV & AC MAINTENANCE 328050 MECHANICAL AND WELDING SERVICES 328070 PLATFORM MAINTENANCE – OFFSHORE328075 PLATFORM MAINTENANCE – ONSHORE328100 VALVES REFURBISHMENT 328110 ONLINE LEAK SEALING SERVICES328120 LEAK SEALING SERVICES

3.3- PIPING, COLUMNS AND TANKS – MAINTENANCE 3.3.1- PIPING- MAINTENANCE

331030 HEAT TRACING SYSTEMS (STEAM/ELECTRICAL)331040 HOT TAPPING WORKS331060 INSULATIONS, CLADDING REPAIRS – PIPING 331070 PIPING – LOW TEMPERATURE SERVICE 331100 PIPING & SPOOLS ( STEEL) – FABRICATION/INSTALLATION/ REPAIRS/ RENEWAL331110 PIPING (R.T.R.P. & G.R.P.)- FABRICATION/ INSTALLATION/ REPAIRS/ RENEWAL331120 DUPLEX PIPING – FABRICATION/ REPAIRS/REPLACEMENT/ RENEWAL

3.3.2- COLUMNS, TANKS, VESSELS & OTHER – MAINTENANCE332010 COLUMNS- TRAYS & INTERNALS332020 COOLING TOWERS MAINTENANCE332030 RUBBER LININGS (TANKS, VESSELS, COLUMNS)332040 INSULATION, CLADDING REPAIRS- COLUMNS, TANKS, VESSELS 332050 TANKS- SLUDGE REMOVAL332055 TANKS – OVERHAUL INCLUDING CLEANING, INSPECTION, REPAIRS ETC.332060 INTERNAL LININGS (TANKS, VESSELS, COLUMNS)

3.4 – ELECTRICAL PLANT & EQUIPMENT – MAINTENANCE3.4.1-MOTORS AND GENERATORS – MAINTENANCE

341010 BALANCING OF MOTOR SHAFTS341020 ELECTRIC MOTORS DC/VARIABLE SPEED341030 ELECTRIC MOTORS MAINTENANCE341050 EMERGENCY DIESEL GENERATORS341060 GENERATORS OVERHAUL AND REPAIRS341070 MOTOR OPERATED VALVES (M.O.V.)341080 POWER GENERATION MAINTENANCE341090 REWINDING & SERVICING OF GENERATORS341100 REWINDING/REPAIRS OF MOTORS341120 SOLAR POWER PANELS 341140 THYRISTER DRIVES

3.4.2-SUB STATIONS, SWITCH GEARS & TRANSFORMERS – MAINTENANCE342010 TRANSFORMS SERVICING & REWINDING342020 SHORT CIRCUIT CURRENT LIMITORS342030 SUBSTATION EQUIPMENTS MAINTENANCE 342050 SWITCH GEARS HT/LT/MCC MAINTENANCE 342070 SWITCHYARDS342090 SWITCH GEARS HT / LT / MCC - MAINTENANCE

Page: 42/51


3.4.3-CABLES, TRANSMISSION AND DISTRIBUTION – MAINTENANCE343010 CABLE TRAYS/RACKS MAINTENANCE343030 OVERHEAD TRANSMISSION LINES MAINTENANCE343040 UNDERGROUND CABLES AND ACCESSORIES MAINTENANCE

3.4.4-OTHER ELECTRICAL PLANT & EQUIPMENTS – MAINTENANCE344010 BATTERIES/BATTERY CHARGERS / U.P.S.344020 CATHODIC PROTECTION SYSTEM MAINTENANCE344030 CONTROL PANELS/STATIONS MAINTENANCE344035 CORROSION PREVENTION/MONITORING SYSTEM344040 LIGHTING MAINTENANCE – GENERAL344050 EARTHING SYSTEM344060 ELECTRICAL TESTING EQUIPMENTS344080 INDUSTRIAL LIGHTING SYSTEMS – HAZARDOUS AREA344090 INDUSTRIAL WIRING344100 NAVIGATIONAL SIGNALLING SYSTEMS

3.5 – INSTRUMENTATION & TELECOM. SYSTEMS- MAINTENANCE 350010 ANALYSERS350030 ANTI-SURGE CONTROL SYSTEMS 350040 BLENDING SYSTEMS350050 CCTV/CATV/MATV/LV INSTRUMENTATION SYSTEMS – INST. & MAINT.350090 ELECTRONIC CARD REPAIRS350100 EMERGENCY SHUTDOWN SYSTEMS350110 EXPLOSION & WEATHERPROOF TELEPHONES, ACOUSTIC BOOTH ETC.350120 FIRE & GAS SYSTEM REPAIRS350130 INSTRUMENT SHELTER CABINS350140 INSTRUMENTATION & COMMUNICATION CABLING (UNDERGROUND)350150 INSTRUMENTATION & COMMUNICATION CABLING (OVERHEAD)350160 INSTRUMENTATION TUBING350170 INSTRUMENTATION TEST/REPAIR SERVICES350180 INSTRUMENTS MEASUREMENT / CALIBRATION SERVICES350190 LAB INSTRUMENTS MAINTENANCE/REPAIRS350230 METERING SYSTEMS350240 MICROWAVE SYSTEMS350250 SCADA SYSTEMS / PLC350260 POP TESTING OF SAFETY RELIEF VALVES350270 PRESSURE REGULATING STATIONS350280 PROCESS CONTROL & AUTOMATION350300 RADIO PAGING SYSTEMS350320 SAFETY CONTROL SYSTEMS350330 SATELLITE SYSTEMS350340 TELECOMMUNICATION CABLING – FIBRE OPTIC350350 TELECOMMUNICATION CABLING – GENERAL350360 TELECOMMUNICATION EQUIPMENT REPAIRS350370 TELEPHONE SYSTEMS350380 TRAINING SIMULATION SYSTEMS350390 UHF RADIATION350400 VIBRATION MONITORING SYSTEMS

Page: 43/51


GROUP 3.0 PLANT OPERATION & MAINTENANCE 3.6- INSPECTION/ TESTING/ COMMISSIONING SERVICES

3.6.1 – INSPECTION AND TESTING SERVICES361010 COMBUSTION/GAS PATH INSPECTION OF GAS TURBINES361020 CORROSION INSPECTION361030 CRUDE ASSAY/TESTING361040 HEAT EXCHANGER – EDDY CURRENT TESTING361050 HEAT EXCHANGER – HYDRAULIC TESTING361060 HYDRAULIC/HYDROSTATIC TESTING361080 INSPECTION & TESTING OF LIFTS, CRANES, SLINGS, TACKLES ETC.361095 MATERIAL TESTING – CIVIL361096 MATERIAL FINAL INSPECTION361097 LABORATORY TESTING – OIL/GAS/WATER ETC.361098 MATERIAL TESTING – METALLURGICAL.361099 MATERIAL TESTING – PAINTING/COATING361100 MARINE/DIVING/SUB-SEA INSPECTION361120 INSPECTION – PIPELINES361125 INSPECTION – TANKS/VESSELS ETC.361130 SOIL TESTING361140 STRESS ANALYSIS361150 VIBRATION TESTING OF ROTATING EQUIPMENTS361160 CCTV INSPECTION

3.6.2 – COMMISSIONING SERVICES362010 COMMISSIONING & START UP SERVICES – PLANT362020 PIPELINES – NITROGEN PURGING362030 PIPELINES – PIGGING SERVICES362035 PIPELINES – INTELLIGENT PIGGING SERVICES362040 PIPELINES – SWABBING, HYDROTESTING, DEWATERING & DRYING

3.7- GENERAL PLANT MAINTENANCE SERVICES3.7.1 – HIRING SERVICES – PLANTS

371010 HIRE OF CRANES371020 HIRE OF EARTH MOVING EQUIPMENTS371030 HIRE OF HEAVY LIFTS AND TRAILER BEDS371040 HIRE OF OTHER MECHANICAL/ELECTRICAL EQUIPMENTS371050 HIRE OF TEST EQUIPMENT/INSTRUMENTS371060 HIRE OF TRANSPORTATION – BULK MATERIAL

3.7.2 – PAINTING SERVICES – PLANTS 372010 BLASTING & PAINTING –STEEL STRUCTURE372020 BLASTING & PAINTING- TANKS, VESSELS & COLUMNS 372025 BLASTING & PAINTING – PIPING372030 BLASTING & PAINTING – OTHER EQUIPMENT372035 BLASTING & PAINTING – SPECIAL372040 MARINE STRUCTURE – PAINTING372050 FIRE PROOFING BY INTUMESCENT PAINTING372055 FIRE PROOFING WORKS – GENERAL372060 FIRE PROOFING WORKS - CABLES

Page: 44/51


3.7.3 – PLANT CLEANING SERVICES373010 CHEMICAL/TOXIC CLEANING373025 WATER TANKS CLEANING – INDUSTRIAL373030 DUMPING SITE CLEARING373040 EXCAVATION, DISPOSAL & TREATMENT OF CONTAMINATED SOILS373050 REMOVAL / DISPOSAL OF WASTE MATERIALS373060 SEWAGE CLEANING/ DRAINAGE CLEARING SERVICES373070 DEWATERING SERVICES373080 HYDRO JETTING 373090 REMOVAL / DISPOSAL OF HAZARDOUS WASTE MATERIALS

3.7.4 – OTHER PLANT OPERATION/ MAINTENANCE SERVICES374020 CAMP OPERATION & MAINTENANCE374025 FREIGHT FORWARDING & CLEARANCE SERVICES374027 CUSTOM CLEARANCE 374029 LIQUID SUPHUR TRANSPORTATION BY TANKERS374030 CARPENTRY WORKS374040 CATALYST RECLAMATION/ REGENERATION/ DISPOSAL374045 CORROSION PROJECTION / PREVENTION WORKS374060 DISMANTLING374080 HEAT TREMANT- POST WELD (P.W.H.T)/STRESS RELIEVING374100 INDUSTRIAL DOORS(FOR WORK SHOP & FACTORIES)374110 INDUSTRIAL SECURITY SYSTEMS374130 METAL SPRAYING/REBUILDING374140 CRANES MAINTENANCES (O.H)374160 SCAFFOLDING SERVICES374165 ROPE ACCESS SERVICES374170 SIGN BOARDS374180 ROAD MARKINGS374200 STRESS RELIEVING374205 THERMAL INSULATION – OTHER THAN PIPELINE & PIPINGS

Page: 45/51


GROUP 4.0- INFORMATION SYSTEMS & TECHNOLOGIES GGroup 4 covers Consultancy, Development, Installation and Maintenance Contracts

related to information Systems & Technologies:400010 COMPUTER HARDWARE (PC SERVERS & PCS) MAINTENANCE400012 SUPER COMPUTER, MAINFRAMES AND MINI COMPUTER SYSTEMS ( BRANDED)

MAINTENANCE400015 ELECTRONIC DOCUMENT MANAGEMENT SYSTEM (IMAGING SYSTEM ETC)400020 COMPUTER NETWORK MAINTENACE – SITE WORK400030 COMPUTER NETWORKING NETWARK MANAGEMENT – TURNKEY 400040 BUSINESS APPLICATION SOFTWARE PACKAGES (DEVELOPMENT, SUPPLY, INSTALLATION

& MAINTENANCE)400050 PCs., PRINTER, PLOTTER & SCANARS ( SUPPLY & INSTALLATION)400055 COMPUTER PERIPHERALS & COMPONENTS (SUPPLY & INSTALLATION)400060 COMPUTER STATION/IT/AUTOMATION STUDIES/ CONSULTANCY400080 BRANDED SUPER COMPUTERS, MAINFRAMES AND MINI COMPUTER SYSTEMS – SUPPLY

INSTALLATION & MAINTENANCE400090 NETWORKING COMPONENTS (BRIDGES, GATEWAYS, ROUTERS, HUBS, ANALYSER)-

SUPPLY & INSTALLTION400095 STRUCTURED CABLING/UTPS/FIBER OPTICS (SUPPLY, INSTALLATION & MAINTENANCE)400120 SOFTWARE DEVELOPMENT 400125 SOFTWARE – STANDARD AND MISCELLANEOUS400130 IT HARDWARE SUPPORT SERVICES – HARDWARE ENGINEERS400140 IT SOFTWARE SUPPORT SERVICES – SOFTWARE ENGINEERS400150 DOCUMENT SCANNING & INDEXING SERVICES

GROUP 5.0- PERSONNEL & MANPOWER SERVICES Page: 46/51


G Group 5 covers Manpower and other personnel related Contracts Services:5.1 MANPOWER SUPPLY ENGINEERS

510010 ARCHITECTS510020 AUTOMATION ENGINEERS510030 CIVIL ENGINEERS510040 COMMISSIONING ENGINEERS510050 COMPUTER HARDWARE ENGINEERS510060 COMPUTER SOFTWARE ENGINEERS510070 CONSTRUCTION ENGINEERS510080 CONTRACTS ENGINEERS510100 CORROISION ENGINEERS510110 COST ENGINEERS510120 DATA NETWORK ENGINEERS510130 ELECTERICAL ENGINEERS510135 GEOPHYSICIST ENGINEERS510140 QA/QC/INSPECTION ENGINEERS510150 INSTRUMATION ENGINEERS510160 OPERATION ENGINEERS510170 MATERIALS ENGINEERS510180 MECHANICAL ENGINEERS510190 PIPLINE ENGNEERS510200 PROCESS / OPERATION ENGINEERS510210 PROJECT ENGINEERS510215 MARINE ENGINEERS510220 PURCHASING ENGINEERS/BUYERS510222 RELIABILITY ENGINEERS510225 QUANTITY SURVEYORS ENGINEERS510230 ROTATING EQPT.ENGINEERS510240 SAFETY ENGINEERS(HEALTH,SAFETY & ENVIRONMENTAL)510245 SYSTEM ANALYSTS510250 TELECOMMUNIATION ENGINEERS510260 PLANNING / SCHEDULING ENGINEERS510270 REGISTRATION CO-ORDINATORS510280 MATERIALS CO-ORDINATOR510290 STORE KEEPER510300 SENIOR STORE KEEPER510900 SPECIALIST MANPOWER510980 ENGINEERS – VARIOUS DISCIPLINES (FOR MAIN CONSULTANTS ONLY)

GROUP 5.0- PERSONNEL & MANPOWER SERVICES 5.2 MANPOWER SUPPLY – SUPERVISORS/TECHNICIANS

Page: 47/51


520010 NDT SUPERVISOR/TECHNICIANS520020 CODED WELDERS520030 SUPERVISORS – MECH/ELEC./INSTR./CIVIL520040 TECHNICIANS – MECH/ELEC./INSTR. & PIPE FITTERS520050 PAINTERS520060 DIVERS520070 PROGRAMMERS

5.3 MANPOWER SUPPLY – NON TECHNICAL PERSONNEL530010 FINANCIAL ACCOUNTANTS530015 LEGAL ADVISOR530020 STAFF FOR CLERICAL/ADMINISTRATION SERVICES530030 CLEANING SUPERVISORS/OFFICERS530040 CATERING SUPERVISORS/OFFICERS530042 DATA ENTRY CLERKS530045 DOCTORS AND MEDICAL STAFF530050 LABOURS530060 DRIVERS/OPERATORS (FOR FORK LIFT ETC.)

5.4 OTHER PERSONNEL CONTRACTS/SERVICES540010 MANAGEMENT, ORGANIZATION & DEVELOPMENT CONSULTANCY540015 PROCEEDURE MANUALS & SYSTEMS CONSULTANCY540020 RECRUITMENT SERVICES FOR ADMIN & NON TECHNICAL PERSONNEL540030 RECRUITMENT SERVICES FOR MANAGERIAL & TECHNICAL PERSONNEL540040 SECONDMENT OF MANPOWER540050 SPECIALIZED TRAINING SERVICES

6.0 – FINANCE SERVICESGroup 6 covers all studies and Consultancy Contracts related to Financial Services:600010 ACCOUNTING CONSULTANCY

Page: 48/51


600020 ASSETS/INVENTORY AND RECORDS MANAGEMENT600030 COST ENGINEERING CONSULTANCY600040 FINANCIAL AUDIT600045 INSURANCE POLICIES600050 LEGAL SERVICES CONSULTANCY600055 FINANCE RELATED POLICIES & PROCEEDURE MANUALS600060 SYSTEM AUDIT600070 RISK MANAGEMENT & INSURANCE CONSULTANCY

7.0 – MARKETING SERVICESGroup 7 covers all studies and Consultancy Contracts related to Marketing

Services:700010 MARKETING STUDIES700020 SHIP CONSTRUCTION SUPERVISION700030 SHIP LOADING SUPERVISION700040 SHIP MANAGEMENT

GROUP 8.0 ADMINISTRATION & GENERAL SERVICESGroup 8 covers General Services related to Administration Services

including maintenance for offices, Buildings, Villas, Medical etc.8.1 – CATERING SERVICES

810020 CATERING SERVICES CLUBS, OFFICES ETC. – OPERATION & MAINTENANCE

8.2 – LEASING SERVICES820010 LEASING – BUSES/CARS820020 LEASING – INDUSTRIAL AREAS820030 LEASING – OFFICE EQUIPMENTS/MACHINES820040 LEASING – TRANSPORTATION & MATERIAL HANDLING EQUIPMENTS820050 LEASING – ACCOMMODATION – SHORT TERM/ LONG TERM

8.3 – MEDICAL & HSE SERVICES830010 MEDICAL SERVICES (PHARMACEUTICAL ETC.)830020 MEDICAL SERVICES – MANAGEMENT OF HOSPITALS/CLINICS830030 MEDICAL EQUIPMENT – MAINTENANCE830040 STUDIES ON HEALTH, SAFETY & ENVIRONMENT (HSE)830045 STUDY ON OIL SPILLS/MARINE ENVIRONMENT PROTECTION830047 HARBOUR POLLUTION CONTROL/SKIMMING/DEBRIS CLEAN-UP SERVICES830050 MEDICAL SERVICES – DENTAL CLINICS

8.4 – OFFICES, BUILDINGS AND VILLAS MAINTENANCE840010 AIR CONDITIONING – GENERAL PLANT (CHILLED WATER SYSTEM) – SUPPLY & INST.840015 AIR CONDITIONING – GENERAL PLANT (CHILLED WATER SYSTEM) – OPERATION &

MAINT.

Page: 49/51


840020 AIR CONDITIONING – PACKAGE/SPLIT/WINDOW TYPE – SUPPLY & INST.840022 AIR CONDITIONING – PACKAGE/SPLIT/WINDOW TYPE (OPERATION & MAINT.)840023 COLD STORAGE CONSTRUCTION & MAINTENANCE840025 CENTRALISED COOKING GAS SYSTEM840028 FIRE ALARM & DETECTION SYSTEM – DOMESTIC840029 FIRE FIGHTING/ALARM SYSTEM MAINTENANCE (SERVICE AGREEMENTS)840030 PLUMBING & SANITATION – SUPPLY & INST.840032 PLUMBING & SANITATION – MAINTENANCE840040 GENERAL BUILDING MAINT. (CIVIL, ELECT. & PLUMBING)840050 KITCHEN CABINETS & FITTINGS – SUPPLY, INSTALLATION & MAINT.840060 LIFTS/ELEVATORS, ERECTION/MAINTENANCE840070 OFFICE EQUIPMENTS, FURNITURE & FIXURES – SUPPLY & FIXING840072 OFFICE EQUIPMENT – MAINTENANCE840075 OFFICE REFURBISHMENT & FURNISHINGS – PROJECTS840080 PARTITION (METAL) AND ALUMINIUM CLADDINGS840090 PORTABLE BUILDINGS (CARAVAN, RIGID, BUTLER BUILDINGS)840100 PORTABLE WATER TANKERS FOR BUILDINGS & VILLAS840102 HIRE OF PORTACABINS/CARAVANS/TEMPORARY ACCOMMODATION UNITS840105 PORTABLE/BOTTLED WATER AND WATER COOLER SERVICE840110 PUBLIC ADDRESS SYSTEMS840120 FLOORING (SPECIALIZED INCLUDING RUBBER/PVC/WOODEN/EPOXY, ETC.)840130 H.T. POWER STATION/SUBSTATION/SWITCH GEAR/TRANSMISSION NETWORK – SUPPLY &

INST.840140 H.T. POWER STATION/SUBSTATION/SWITCH GEAR/TRANSMISSION NETWORK –

MAINTENANCE840150 LV/MV DISTRIBUTION NETWORK, PANELS, PROTECTIVE DIVICES ETC. – SUPPLY & INST.840160 LV/MV DISTRIBUTION NETWORK, PANELS, PROTECTIVE DIVICES ETC.– MAINT.840170 AIR DUCT CLEANING AND SANITIZING840175 KITCHEN HOOD EXHAUST SYSTEM CLEANING AND SANITIZING840180 INSTALLATION OF FILTRATION UNITS FOR GASES & SMOKE & BACTERIA & VIRUSES

8.5 – TRANSPORTATION SERVICES850010 LIGHT VEHICLE MAINTENANCE850020 SHIFTING OF OFFICE PARTITIONS ALONG WITH DOORS850030 TRANSPORT MAINTENANCE/REPAIR SERVICE850040 TANSPORTATION – OFFICE FURNITURE/EQUIPMENT & HOUSEHOLD850050 TANSPORTATION – PERSONNEL

8.6 – CLEANING SERVICES860005 CLEANING/PROTECTION OF CARPETS/UPHOLSTRY/CURTAINS860010 CEANING – INTERNAL CLEANING OF BUILDINGS860015 OUTDOOR CLEANING & ROAD SWEEPING860020 CLEANING – HQ & COMPLEX

Page: 50/51


860030 CLEANING – PUBLIC HEALTH & PEST CONTROL860035 JANITORIAL AND HYGIENE SERVICES860040 CLEANING – SITE CLEARANCE/REMOVAL SERVICE860045 LAUNDRY SERVICES860050 EXTERNAL BUILDING CLEANING USING CRADLES860060 WATER TANKS DOMESTIC (G.R.P., ETC.) – CLEANING/REPAIR/REPLACEMENT/RENEWAL860070 TANKERS FOR SEWAGE REMOVAL

8.7 – OTHER GENERAL SERVICES870010 ADVERTISEMENT 870015 PHOTOGRAPHY AND VIDEOGRAPHY SERVICES870020 AUCTIONING & MATERIAL DISPOSAL870030 AUTOMATIC CONTROL DOORS & BARRIERS – INST. & MAINT.870050 ACCESS CONTROL SYSTEMS – INST. & MAINT.870060 DOCUMENT/OFFICE AUTOMATION SYSTEMS870070 EDUCATION & SCHOOL MANAGEMENT.870080 EDUCATION & TRAINING870090 FIBRE GLASS PRODUCTS MAINTENANCE SERVICES870100 INSULATION- ACOUSTIC ETC. FOR BLDGS.870110 LANDSCPING/IRRIGATION WORKS870120 LOCK – SMITHY SERVICES870130 MARBLE SUPPLIERS AND FIXERS870135 MEMBERSHIPS – CLUBS ETC.870140 PAINTING SERVICES – BUILDINGS870160 PRINTING & PUBLISHING870170 SAFETY AND SECURITY – BUILDINGS 870180 SAND/RIGHT OF WAY CLEARING870190 SPARY PAINTING OF HIGH QUALITY – OFFICES870200 TECHNICAL DOCUMENTATION SERVICES870205 TRANSULATION & LINGUISTIC SERVICES870210 WATER TANKS LININGS – BUILDINGS870230 COURIER SERVICES870240 TRAVEL & TOURISM SERVICES870250 SECURITY & SURVEILLANCE SERVICES870260 STORAGE RACK/ SHELVES SYSTEM (SUPPLY & INSTALLATION)870270 INDOOR PLANT (SUPPLY & CARE MAINTENANCE)

Page: 51/51