calibrating wavelengths in the region from 0.6 to 2.6 microns · 2012-02-24 · calibrating...

4
Journal of Re search of t he National Bureau of Standards Vol. 49, No. 1, July 1 952 Research Paper 2338 Calibrating Wavelengths in the Region From 0.6 to 2.6 Microns Nicolo Acquista and Earle K. Plyler Th e wa veleng th s of twe nt y absorption bands ha\ 'e been me asur ed on a grating bpec- tr omet er in the region from 0.6 to 2.6 mi crons. Algo. several lin es of kr.vpton hay '! been meas ur ed in the near infrared region . Th e purpose of this inv estiga tion was to mak e avai lable additional calibration poin ts for pri sm in st ruments. Th e band s which \\'ere se l ecte d fo r ca libration are part s of t'he ab s orpti on spect ra of didymium glass, ca rbon di sulfide, 1,2, 4-tric hl orobe nzene, ca rbon di sulfide , and polys ty re ne. Five grap hs of th e measured spectra a re in clud ed, and the calibrat ed wavelengt h, are mark E' d on the ba nd ., in order to fa cilitate identification . In o rd er to calibrate pri sm in strum en ts ad equately, many abso rp t ion. bands and emission lin es of accu- ratcl.\T known wav elengths ar e needed. This is e pecially so in t he wavelength region b et ween 0.6 to 2.6 J.l. , wh ere the wave numb er span is 16 ,000 cm - l . The purpose of this investigation was to provide add itional calibrat ion poin ts in th e near infrared region. for use with pr ism ins trument s. Previously, th e problem of obtaining cal ibration points in the inhal' ed region h as b ee n st udi ed by Oetjen, Chao- Lou Kao , and Randal!.l : Mor e recently , Plyler and Peters 2 hav e added ealibration points co vei:ing th e (" egion from 2 to 25 J.l. . Ther e are st ill several gaps where furtbcl' calibration points woulel b e desirable, in addition to the combined results g iv en in th e art icl es c it .eel in footnot es 1 and 2. Th e calibration of oth er point s in th (', ncar infra- red r eg ion from th e visible to 2.5 J.l. has been neglected b ecause no fundamental v ibrational absorption band s h ave wavelength s less than 2.5 J.l. . For this reason, mo st observation s comm ence at 2 J.l.. the importance of combination and harm onic band s has h ee n l' ecogni lleci in the of s pe ct ra , and measm ement s arc now being made at wav el engths less than 2 J.l.. acc urat e calibr at in g wav e- kngths are necessary in order to fu ll v uLili ze Ghe high sen sit ivity of i nst rument s which arc eq uipp ed with lead sulfide (PbS ) cell s. The leael sulfid e cell ha s be en found to be very ensitive JOY the d etection of radiant energy from 0:6 to 2.6 J.l. a nd thus allows a much greatm' accurac.v and hi gh er l' esolu lion than hitherto possible fOl' prism inst rum ent s. Th e wave- lengths listed in the present st ud.v should assi st in relieving t hi s situati on . Th e absorpLion band s selected for calibra tion \\"ere measured on a hi gh -dispersion grat ing sp ec - trometer. Th csp ectrometcr h asa l 5, 000-line-per-ineh gral ing as the dispersing uni t, and the collimating mirror has a focal Irngth of 10 2 em. A lead-sulfide pholocondu cting cell detects t he radiant e nel'g,\r passing Lh rough t]le exit slit of th e specLI·o met er. A more compl ete des cription of th e grat ing spee- trometet' has b een given in a previolls pap er and wi ll not be repeated h e1'e. 3 I R. A. Octien, Chao·L ou Kao, and II . :If . Rand a ll , RH. Sci. In sLr. 13, 515 (1942). , Earle K . Pl ylN' and C. Wilb ur Peters. .T. Hesearch N B S f .;, 452 (1950) HP21 59. 3 Earle K. Pl y ler and 1\ orman Gailar, J. Hesearch X BS fl, 248 (195 1) RP224g. 13 The calib rat ion of th e spe ctrom eGe r ha s been nud e by the use of higher ord ers of stand n; rd atom ie lin es t ha t appear as firs" order lin es in the visible and ncar infrared sp ect rum . The emi ssion lin es from mer- cury, kr.\-pton, argon, ne on , and xenon werc ob erved fl'om hi gh c urr ent arcs, and the position of th e grat ing was indi cat ed by a co unt er wh en th e lin es were de- tected . Thi s nlad e iG possible to obtain a wave- len gth scale as a fun ct ion of the count er readings. the use of the calibration curve for 1.h e gyating spec trom eter, it was found that the wavelength s of spectral lines can be measured t,o an aceu ra.cy of ± O.OOOI J.l.. Wn en absorption bftnds arc meas ur ed , th e wav elengths can Ll suall .v be d ete rmin ed to an of ± 0.001 J..L. Th e grating sp ec trom eter h as a hi gh di spersion and Lhe bands arc wid e, so thftt there is an uncertain ty in lo cating Lhe position of maximum absorption . Thi s reduce tbe aCCLIl'a cy of the wavelengths to the abo ve mentioned value. In order to h ave a dlc ck on the wavel ength calib ra- ti on , t wo S Our ees of rad iat ion arc uS ll all,v re corded simul ta n eo ush'. One so ur ce is a t ungsten-ribbon- filament l amp, which is operaLed a curi'ent of 35 amperes a nd se tves as the radiato,' of tbe co ntin- uou s ene rgy. Th e olher so urce is a rn erC lllY 01' ft kryp Lo n are. B\ -m ea11S of mi1'1'o"l' s, bolh sourc'e are fo cussed on th e entra nce slit of lhe sp ecLrome kL·. The experimen t.al res ul ts arc rep resen ce d in fi g u], cs 1 to !'), and show th c sp eelm of didnTlium glass, pol ystyre ne, ] ,2,4-tl'ichlo robenzene, and Lhe emissi on sp ectr um of kr.\' pton. Th e did.\' mium glass was selected on th e basis of i ts successful usc for calib ra- tions in the visible region, wh ere tesls over a number of .\"ears have shown tbat the bands do not cha.nge in po sition wi th differ en t b ate h es. Th e poly styrene and 1,2.4-t ri chlol'obenzene ,,"ere selected be cause they arc now in ll se in the ]ongel' \\-avclength region; th us the lola l number of ma terials needed fo1' cal ib ration would not be increaseci. On e band of carbon disul- fid e (CS 2) with a waYClengtb of 2.224 J.l. h as been calib rated. It is well sep arated from the other bands of CS 2 an e! no fi gure is given as there should b e li tt le difficult\- in its id ent in ealion. FigU/:e 1 is a trace of the spec lrum of clicl.vmium glass as measureci on a model 2l Perkin-Elmel' spe c- trometer containi ng a ::\aCl prism. Th e wavelengths measured th e use of the grating spectrometer are marked on the fi gur e, and al'e also li sted in tftble ] .

Upload: others

Post on 17-Feb-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Calibrating wavelengths in the region from 0.6 to 2.6 microns · 2012-02-24 · Calibrating Wavelengths in the Region From ... carbon disulfide, 1,2,4-trichlorobenzene, carbon disulfide,

Journal of Research of the National Bureau of Standards Vol. 49, No. 1, July 1952 Research Paper 2338

Calibrating Wavelengths in the Region From 0.6 to 2.6 Microns

Nicolo Acquista and Earle K. Plyler

The wave lengths of twenty absorption bands ha\'e been measured o n a grating bpec­trometer in the region from 0.6 to 2.6 mi cron s. Algo . se ver a l e mis~ i on lines of kr.vpton hay '! been meas ured in the near infrared region . The purpose of t his investiga tion was to mak e avai lable additional calibration poin ts for pris m instrume nts.

The bands whi ch \\'ere selected fo r calibration are part s of t'he absorptio n spectra of didymium glass, carbon disulfide, 1,2,4-trichlorobenze ne, ca rbon disulfide , and polys ty re ne. Five grap hs of the measured spectra a re in cluded , and the calibrated wavele ngth, are mark E'd on t he band., in order to fa cilitate identification .

In ord er to calibrate prism instrum en ts ad equately, many abso rp tion. bands and emission lin es of accu­ratcl.\T known wavelength s are needed . This is e pecially so in t he wavelength region b etween 0.6 to 2.6 J.l. , wh ere the wave numb er span is 16,000 cm - l. The purpose of this inves tigation was to provid e add itional calibration poin ts in th e near infrared region. for use with prism instruments. Previously , th e problem of obtaining cal ibration points in the inhal'ed region h as been studied by Oetjen, Chao­Lou Kao , and Randal!.l :More recently, Plyler and Peters 2 have added ealibration points co vei:ing th e ("egion from 2 to 25 J.l. . There are still several gaps where furtbcl' calibration points woulel be high l ~T desirable , in addition to the combined results giv en in th e articl es cit.eel in footnotes 1 and 2.

The calibration of oth er points in th (', ncar infra­red r egion from th e visible to 2.5 J.l. has been neglected b ecause no fundamental vibrational absorption band s h ave wavelength s less than 2.5 J.l. . For this reason, most observations commence at 2 J.l.. Recentl~', the importance of combination and harmonic bands has h een l'ecognilleci in the anal~' s i s of spectra, and measm ements arc now being made at wavelengths less than 2 J.l.. ~Jore accurate calibratin g wave­k ngth s are necessary in order to fullv uLilize Gh e high sensitivity of inst ruments which a rc eq uipp ed with lead sulfid e (PbS ) cells. The leael sulfid e cell has been found to be very ensitive JOY th e detection of radiant energy from 0:6 to 2.6 J.l. and thu s allows a much greatm' accurac.v and high er l'esolu lion than h it herto possible fOl' prism instruments. Th e wave­lengths listed in the presen t stud.v should assist in rel ieving this situation.

Th e absorpLion bands selected for calibra tion \\"ere measured on a high -dispersion grat ing spec­trometer. Th csp ectrometcr hasa l 5,000-line-per-ineh gral ing as th e dispersing uni t, and th e collimating m irror has a focal Irngth of 102 em. A lead-sulfid e pholocondu cting cell detects the radiant enel'g,\r passing Lhrough t]l e exit slit of th e specLI·ometer. A more complete description of th e grating spee­trometet' has b een given in a previolls paper and will not be repeated h e1'e.3

I R. A. Octien, Chao·Lou Kao, and II . :If . Rand a ll , RH. Sci. InsLr. 13, 515 (1942).

, Earle K . PlylN' and C. Wilbur Peters . .T. Hesearch N BS f.;, 452 (1950) HP21 59. 3 Earle K. Ply ler and 1\ orman Gai lar, J. Hesearch X BS fl, 248 (1951) RP224g.

13

The calibration of th e spectromeGer has been nud e by th e use of higher orders of stand n;rd atomie lines that app ear as firs" order lines in the visible and ncar infrared spectrum . The emission lines from mer­cury, kr.\-pton, argon, n eon, and xenon werc ob erved fl'om high current arcs , and the posi tion of th e grating was indi cated by a counter wh en th e lines were de­tected . This nlad e iG possible to obta in a wave­length scale as a function of the counter readings. B~ the use of th e calibration curve for 1.h e gyating spectrometer , it was found that the wavelength s of spectral lines can b e measured t,o an aceu ra.cy of ± O.OOOI J.l.. Wn en absorption bftnds arc measured , th e wavelengths can Ll suall.v b e determined to an accurac~T of ± 0.001 J..L. The grating sp ectromete r has a high dispersion and Lh e bands arc wid e, so thftt th ere is an uncerta in ty in locating Lhe position of maximum absorption . This reduce tbe aCCLIl'acy of the wavelength s to the above mentioned value. In order to h ave a dlcck on th e wavel ength calibra­t ion, two SOurees of rad iation a rc uSll all,v recorded simultaneo ush' . One so urce is a t ungs ten-ribbon­filament lamp, which is operaLed w i ~h a curi'ent of 35 amp eres and setves as th e radiato,' of tbe contin­uous ene rgy. Th e olher so urce is a rn erClllY 01' ft kryp Lon are. B\- mea11S of mi1'1'o"l's, bolh sourc'e are fo cussed on th e entra nce slit of lhe specLromekL·.

The exper iment.al resul ts arc rep resen ced in fi gu],cs 1 to !'), and show th c speelm of didnTlium glass, polystyrene, ] ,2,4-tl'ichlo rob enzene, and Lhe em ission spectrum of kr.\'pton. Th e did.\'mium glass was selec ted on th e basis of its successful usc for calibra­tions in th e v isible region, wh ere tesls over a number of .\"ears h ave shown t ba t th e bands do not cha.nge in posit ion wi th differ en t batehes. Th e polystyrene and 1,2.4-tri chlol'obenzene ,,"ere selected because they arc now in ll se in the ]ongel' \\-avclength region ; thus the lolal number of ma ter ials needed fo1' cal ibration would not be increaseci. On e band of carbon disul­fid e (CS2 ) with a waYClengtb of 2.224 J.l. h as been calibrated. It is well separated from the oth er band s of CS2 an e! no figure is given as there should b e little difficult\- in its id ent in ealion.

FigU/:e 1 is a t race of the spec lrum of clicl.vmium glass as measureci on a model 2l Perkin-Elmel' spec­trometer containing a ::\aCl prism. Th e wavelengths measured b~T th e use of the grating spectrometer are marked on the fi gure, and al'e also listed in tftble ] .

Page 2: Calibrating wavelengths in the region from 0.6 to 2.6 microns · 2012-02-24 · Calibrating Wavelengths in the Region From ... carbon disulfide, 1,2,4-trichlorobenzene, carbon disulfide,

T ABLE 1.

' '''avele ngth

" 0. 684 ± O.OOI .740 . 001

". 743 .002 . 748 . 001 .808 . 001

. 880 . 001 1. 067 . 002 1. 220 . 002 L 5 17 . 003 1. 681 . 002

1. 918 . 003 2. 144 . 00 1

b2. 170 . 002 2. 187 . 00 1 2.224 . 002

1.6606 .0002 2. 1526 .0002 2.3126 . 0002 2. 4030 . 0002 2. 4374 . 0002

2.494 . 002 2.543 . 002

so w

Calibration wavelengths faT prism instruments

\Vave number

(vae)

cm- l

14616 135lO 13455 13365 12373

11360 9369 8194. 6590 594.7

5212 4663 4607 457l 4495

6020.3 4644. 2 4322.9 4160,3 4101.6

4009 3932

State

Solid .... . ... do ...... ... do ...... ... do ...... ... do ......

. _. do ......

... do ......

... do ......

... do ..... . F ilm _____

Solid ..... F ilm _____

... c1o ... . _.

... do ..... _ Liquid ...

... do ..... _

... do ..... _ ___ do_._. __ _ .. do _._. __ _._do .. _. __

__ . do .... __ __ . do ___ . __

'l'hick­ness

mm 6 6 6 6 6

6 6 6 6

. 6

6 . 6 .6 . 6

5

.5

.5

. 5

.5

.5

.5

.5

Substance

Didymi um glass Do . Do . Do . Do .

Do . Do . Do . Do.

Polystyrene

Didymium glass Po lystyrene

D o . Do .

Car bon disulfide

1 J 2J4JL~ r ich l oro benzene Do. Do. Do. Do.

Do. Do.

• A vcrage value of the ma xim a for 0.740 and 0. 748 ,U .

b Principal band observed with prism spectrome ter.

Figure 2 is a trace of the record obtained for th e two band s at 0.743 and 0.808 /-l under high resolution. The emission lines arc produ ced by a mercury arc. The wavelengths listed on the graph for these lines are given as twice the s tandard values since the.'- arc recorded in the second order. Figure 3 !'eprescnts part of th e sp ectrum of polystyrene and shows th e regions used for calibration. The 1.681-/-l band is composed of one component, bu t the 2.170-/-l band h as two side branches that are hardly noticeable on th e prism instrument. Figure 4 represents the sp ec­trum of 1,2,4-trichlorob enzene from 1.6606 to 2.543 /-l . The wavelengths are marked on the bands which have b een calibrated. In a previous puhlication

z o i= '-' W ...J "­W o

'" r

'" w o '" ? N

'" r

'" w o

'" o I

N

'" '" m o OJ o I

(see foo tno te 2) the bands with wavelengths 2.494 and 2.543/-l were not lab eled ; two other bands were incorrectly labeled with these wavelengths. A glass prism was used in the spectrometer for th e meas­urem ent of the emission sp ectrum of lnypton, the results b eing r epresen ted by figure 5. Th e width of some of th e observed lines indicated that several components might be present. Further m easure­ments with the grating spectrometer proved that all the lines measured by the prism instrument had several componen ts.

All of the calibrating wavelengths determined in the present stud y are listed in tables 1 and 2.

The position of the maximum of absorption of those baIlds, which are no t s.nnmetrical or which hav e two or more components, is usually changed when meas-

1 z o ;::

~

WAVELENGTH - -

F IGURE 1. The adsorption spectrum of didymium glass under p1'ism dispersion f1'om 0.6 to 2.0 11 ; t= 0.6 mm.

'" r

"' ''' m w NO I'- '" d ? 1 - '" r

'" w o

'" ? N

- WAVE I_ ENGTH

F IG URE 2. The absorption speclrmn of didymium gloss with mercu1'Y lines superimposed as obtained with a grating instn tment for the bands at 0.743 and 0.808 JJ. ; t= 6 mm.

14

Page 3: Calibrating wavelengths in the region from 0.6 to 2.6 microns · 2012-02-24 · Calibrating Wavelengths in the Region From ... carbon disulfide, 1,2,4-trichlorobenzene, carbon disulfide,

1 z 52 I-(.) w ...J LL w 0

WAVELENGTH ---+

F IG umJ 3. T he in/rared absorpt·ion bands of polystyr·ene at 1.681 and 2.170 f.' obtained w·ith a Wis'm inslr·ument; t= 0 .6 mm.

1

WAVELENGTH ----+

FIG U RE 4 . N eaT infrared spectru'm of 1 ,2,4~lrichloroben zene obser ved with a lithiwn fhwride prism; 0.5 m'm cell.

lll"ed with different spectral slit wid ths. When nar­row slits eorrespondinl~ to a spectral interval of 1 to 3 A are used, as with th e grating spectrom eter, the tru e b and sh ap es are observed and each compon ent is r esol v ed . I'Vb en sp ectral sEt wid th s of 100 A 01· gr eater are used, as with prism instruments , a change in wavelength of the maximum of absorp tion of some hands may occur. This effect has b een observed by K . S. Gibson,· who found that th e wavelength of maximum absorption of th e 0 .743-,u band of didy­mium glass occurred at 0.745 ,u wh en th e sp ectral slit was changed from 100 to 200 A.

The calibration wavelengths of th e bands of didy­mium glass in th e region of 0.68 to 0.88 J.L , which are

-

r :::J, 'It ..... ",

Z ~

~ 0 ~ ~ CD 0 ~:::I. ", W

:::I. "'I/') ", .J 0 ~ 'It ..... ~ IL

'" '" ~~ w ", en 0 ",

WAVELENGTH---+

FIGU RE 5. I nfrared emission lines of kTypton obtained with a P erkin-Elmer spectr·ometer with a glass prism .

listed in tab le 1, have b een compared with th e meas­uremen ts of Gibson.~ Of th e six bands, whi ch wel·e measured incleprnclentl.r, the wavelength valu e of only one differs by more tha n ± 0.001 J.L. This is within th e probable error of m easm ement . In t his study th e wavelength of one band h as b ee n found to be 0.880 J.L , whereas Gibson r eports a value of 0.883 ,u .

T A B I_E 2. Calibr ated Icr-yp ton l·in es Jor prism in6trLm~ents

\-\Pave \"'avo- \Vavo ' Vavc-W avclen gth number Ic ngt h gr ot· \Ii avele ngt h num ber lcngth prism value (vac) ing value prism value (vae) gra ti n g

value

" cm- 1

" " em-I

" 1. 278 ± O. 002 7823 { I. 27824 r 47 150 1. 29345 I. 47345

I. 475 ± 0.005 6777 I. 47<128

1.32l ± O.OOI 7538 { I. 32103 I. 47650 I. 33042 I. 49618

1. 374 ± O. OOl 7276 { I. 37389

r'~'" I. 37633 1. 53269

1. 533 ± 0.005 652l 1. 53353 r 33826 I. 53719

1. 3)2 ± 0.003 7182 l. 3)240 1.51:133 1. 393)J I. 54739 1. 39742

\' "'~ r- 44020 1. 67847 1.'l42 ±O. 003 6933 I. 4421\l I. 683 ±O. 005 5929

1. 68535 l. 44693 I. 68904

I. 68966 l. 69357

1. 8 17 ± O.OO l 5502 {1. 8107] 1. 81844

• K . S. Gibson , K B S Circula r 48'1 (1949).

IS

Page 4: Calibrating wavelengths in the region from 0.6 to 2.6 microns · 2012-02-24 · Calibrating Wavelengths in the Region From ... carbon disulfide, 1,2,4-trichlorobenzene, carbon disulfide,

In table 2 are given the wavelengths of the krypton emission lin es as measured by a prism instrument and by the gr'ating spectrometer', The grating valu es were furnished by C, J . Humphl'e.vs 5 of this Bureau. Th ese lines are not well suited for the calibration of prism instruments with a th ermocouple or bolometer

S C. J. Humphreys, prh"atc communicati on.

as th e detector, bu ~ a plism instrument with a PbS detector would have sufficien t resolution to separate many of th e component lines of th e krypton spec­trum. These lines would be useful fm calibration becf\,use of their high accuracy, whi ch is abou t equf\,l to 1 part in a hundred thousand,

W ASHING'l'ON , April 2, 1952.

16

1