basorfil wire cable tray

Download Basorfil Wire Cable Tray

Post on 04-Jan-2017

223 views

Category:

Documents

3 download

Embed Size (px)

TRANSCRIPT

  • BASORFIL

    1

    WireCable Trays

  • www.basor.com

  • Index

    Wire Mesh Steel Trays 04Accessories 10Supports 16Grounding 18

  • 4

    Electrozinc Plated

    Self Splicing System: Tray is shipped with splices in place. Splice tray in 4 seconds.

    Safety edges help avoid damage to cables.

    Optimal solution for commercial applications.

    Keeps cables ventilated and clear of debris.

    Greater speed and ease of installation: Shape complicated bends and turns by cutting lengthwise wires and forming tray. Cut wires using an asymetrical cutter. Cuts must be made close to wire intersections to reduce burrs and sharp edges.

    Width (in) H1-1/2/35mm H2/65mm H4/105mm H6/150mm

    in2 in2 in2 in2

    2 - 3.57 - -

    4 4.18 7.29 - -

    6 6.51 11.63 - -

    8 8.99 15.81 28.83 44.33

    12 13.80 24.34 45.11 68.20

    16 - 32.86 61.38 92.07

    20 - 41.39 77.66 115.94

    24 - 49.91 93.93 139.81

    BASORFIL

    www.basor.com

    CABLE CAPACITY (inch2 )

  • 5

    BASORFIL SPLICING SYSTEM BF2R H2

    Width SWL centerpiece ELECTROZINC

    DESCRIPTION inch mm (Lbs/ft) d=5ft (kg/m) d=1,5 units REF. kg/m LBS/FT

    BF2R 2"X2" 2" 60 15 23 0 2/7389 0.57 0.38 BF2R 4"X2" 4" 100 30 45 0 2/7248 0.81 0.54 BF2R 6"X2" 6" 150 30 45 0 2/7249 0.86 0.57 BF2R 8"X2" 8" 200 30 45 0 2/7250 1.11 0.74 BF2R 12"X2" 12" 300 30 45 1 2/7251 1.62 1.08 BF2R 16"X2" 16" 400 30 45 1 2/7394 1.98 1.32 BF2R 20"X2" 20" 500 37 55 2 2/7395 2.76 1.84 BF2R 24"X2" 24" 600 37 55 2 2/7396 3.18 2.12

    Self splicing system. For mounting the cable trays there is no need to use more items.

    B

    25 H

    50

    100

    drawn in mm

    BASORFIL SPLICING SYSTEM BF2R H4

    Width SWL centerpiece ELECTROZINC

    DESCRIPTION inch mm (Lbs/ft) d=5ft (kg/m) d=1,5 units REF. kg/m LBS/FT

    BF2R 8"X4" 8" 200 40 60 0 2/7397 1.62 1.08 BF2R 12"X4" 12" 300 40 60 1 2/7398 1.96 1.31 BF2R 16"X4" 16" 400 47 70 1 2/7399 2.76 1.84 BF2R 20"X4" 20" 500 47 70 2 2/7400 3.17 2.11 BF2R 24"X4" 24" 600 47 70 2 2/7401 3.59 2.39

    Self splicing system. For mounting the cable trays there is no need to use more items.

    drawn in mm

    L = 10 FT / 3 m

    L = 10 FT / 3 m

    BASORFIL

    BASORFIL BFR H 6

    Width SWL ELECTROZINC

    DESCRIPTION inch mm (Lbs/ft) d=5ft (kg/m) d=1,5 REF. kg/m LBS/FT

    BFR 8"X6" 8" 200 49 74 2/9549 1.90 1.t27 BFR 12"X6" 12" 300 49 75 2/9550 2.46 1.65 BFR 16"X6" 16" 400 58 86 2/9551 2.83 1.90 BFR 20"X6" 20" 500 58 86 2/9552 3.20 2.14 BFR 24"X6" 24" 600 58 86 2/9553 3.57 2.35

    To assemble cable trays with a width of 200 mm or less, its necessary to use a BF quick joint for each of the cable trays side, with reference number 2/6217 in EZ and 2/6219 in HDG. For wider cable trays, an additional bolt-washer set should be used as a central union joint, reference number 2/4364 in EZ and 2/4360 in HDG.

    SWL = Safety Working Load.

    100

    B

    50

    25 H

    drawn in mm

    PAINT SERVICE YELLOW / RED / BLACK

    YELLOW RED BLACK

    L = 10 FT / 3 m

    BASORFIL BFR H1-1/2

    Width SWL ELECTROZINC

    DESCRIPTION inch mm (Lbs/ft) d=5ft (kg/m) d=1,5 REF. kg/m LBS/FT

    BFR-4"x 1-1/2" 4" 100 12 18 2/3616 0.55 0.37BFR-6"x 1-1/2" 6" 150 12 18 2/3617 0.67 0.45BFR-8"x 1-1/2" 8" 200 12 18 2/3618 0.81 0.54BFR-12"x 1-1/2" 12" 300 12 18 2/3619 1.27 0.85

    To assemble the cable trays, it is necessary to use a bolt-washer set for each of the cable trays side, with reference number 2/4364 in EZ and 2/4360 in HDG.

    SWL = Safety Working Load.

    100

    B

    50

    H

    L = 10 FT / 3 m

    drawn in mm

    www.basor.com

    width

    width

    width

  • 6

    Hot Dip Galvanized

    Optimal solution for commercial applications.

    Keeps cables ventilated and clear of debris.

    Innovative design patented by Basor offers: Greater resistance to flexing. Greater safe working load. Excellent aesthetic finish.

    Quick and easy assembly. Shape complicated bends and turns by cutting lengthwise wires and forming tray. Cut wires using an asymetrical cutter. Cuts must be made close to wire intersections to reduce burrs and sharp edges. Width

    (in)

    H1-1/2/35mm H2/65mm H4/105mm H6/150mm

    in2 in2 in2 in2

    2 - 3.57 - -

    4 4.18 7.29 - -

    6 6.51 11.63 - -

    8 8.99 15.81 29.92 44.33

    12 13.80 24.34 46.04 68.20

    16 - 32.86 62.16 92.07

    20 - 41.39 78.28 115.94

    24 - 49.91 94.40 139.81

    BASORFIL

    www.basor.com

    USEFUL AREA (inch2 )

  • 7

    BASORFIL BFR H 4

    Width SWL HOT DIP GALVANIZED

    DESCRIPTION inch mm (Lbs/ft) d=5ft (kg/m) d=1,5 REF. kg/m LBS/FT

    BFR 8"X4" 8" 200 40 60 2/0298 1.69 1.13 BFR 12"X4" 12" 300 40 60 2/0299 2.05 1.37 BFR 16"X4" 16" 400 47 70 2/0300 2.65 1.78 BFR 20"X4" 20" 500 47 70 2/0301 3.05 2.04 BFR 24"X4" 24" 600 47 70 2/0302 3.45 2.31

    To assemble cable trays with a width of 200 mm or less, its necessary to use a BF quick joint for each of the cable trays side, with reference number 2/6217 in EZ and 2/6219 in HDG. For wider cable trays, an additional bolt-washer set should be used as a central union joint, reference number 2/4364 in EZ and 2/4360 in HDG.

    SWL = Safety Working Load.

    100

    B

    50

    25 HL = 10 FT / 3 m

    drawn in mm

    BASORFIL BFR H 2

    Width SWL HOT DIP GALVANIZED

    DESCRIPTION inch mm (Lbs/ft) d=5ft (kg/m) d=1,5 REF. kg/m LBS/FT

    BFR 2"x2" 2" 60 15 23 2/0290 0.6 0.4BFR 4"x2" 4" 100 30 45 2/0291 0.83 0.56BFR 6"x2" 6" 150 30 45 2/0292 0.89 0.6BFR 8"x2" 8" 200 30 45 2/0293 1.15 0.77BFR 12"x2" 12" 300 30 45 2/0294 1.69 1.13BFR 16"x2" 16" 400 30 45 2/0295 2.05 1.37BFR 20"x2" 20" 500 37 55 2/0296 2.65 1.78BFR 24x2" 24" 600 37 55 2/0297 3.05 2.04

    To assemble cable trays with a width of 200 mm or less, its necessary to use a BF quick joint for each of the cable trays side, with reference number 2/6217 in EZ and 2/4360 in HDG. For wider trays an aditional bolt-washer set should be used as a central union joint, reference 2/4364 in EZ and 2/4360 in HDG.

    SWL = Safety Working Load.

    L = 10 FT / 3 m

    L = 10 FT / 3 m

    100

    B

    50

    25 H

    drawn in mm

    BASORFIL BFR H 1-1/2

    Width SWL HOT DIP GALVANIZED

    DESCRIPTION inch mm (Lbs/ft) d=5ft (kg/m) d=1,5 REF. kg/m LBS/FT

    BFR-4"x 1-1/2" 4" 100 12 18 2/0286 0.63 0.42BFR-6"x 1-1/2" 6" 150 12 18 2/0287 0.73 0.49BFR-8"x 1-1/2" 8" 200 12 18 2/0288 0.89 0.6BFR-12"x 1-1/2" 12" 300 12 18 2/0289 1.39 0.93

    To assemble the cable trays, it is necessary to use a bolt-washer set for each of the cable trays side, with reference number 2/4364 in EZ and 2/4360 in HDG.

    SWL = Safety Working Load.

    100

    B

    50

    H

    L = 10 FT / 3 m

    drawn in mm

    BASORFIL BFR H 6

    Width SWL HOT DIP GALVANIZED

    DESCRIPTION inch mm (Lbs/ft) d=5ft (kg/m) d=1,5 REF. kg/m LBS/FT

    BFR 8"X6" 8" 200 49 74 2/9554 2.05 1.37 BFR 12"X6" 12" 300 49 75 2/9555 2.65 1.78 BFR 16"X6" 16" 400 58 86 2/9556 3.05 2.04 BFR 20"X6" 20" 500 58 86 2/9557 3.45 2.31 BFR 24"X6" 24" 600 58 86 2/9558 3.85 2.54

    To assemble cable trays with a width of 200 mm or less, its necessary to use a BF quick joint for each of the cable trays side, with reference number 2/6217 in EZ and 2/6219 in HDG. For wider cable trays, an additional bolt-washer set should be used as a central union joint, reference number 2/4364 in EZ and 2/4360 in HDG.

    SWL = Safety Working Load.

    100

    B

    50

    25 H

    drawn in mm

    BASORFIL

    www.basor.com

    width

    width

    width

    width

  • 8

    Optimal solution for commercial and light industrial applications.

    Keeps cables ventilated and clear of debris.

    Innovative design patented by Basor offers: Greater safe working load. Excellent aesthetic finish.

    Quick and easy assembly. Shape complicated bends and turns by cutting lengthwise wires and forming tray. Cut wires using an asymetrical cutter. Cuts must be made close to wire intersections to reduce burrs and sharp edges.

    USEFUL AREA (inch2)

    Width (in)

    H1-1/2/35mm H2/65mm H4/105mm H6/150mm

    in2 in2 in2 in2

    2 - 3.57 - -

    4 4.18 7.29 - -

    6 6.51 11.63 - -

    8 8.99 15.81 29.92 44.33

    12 13.80 24.34 46.04 68.20

    16 - 32.86 62.16 92.07

    20 - 41.39 78.28 115.94

    24 - 49.91 94.40 139.81

    BASORFIL

    www.basor.com

    Stainless Steel Wire-Mesh Cable Trays

  • 9

    BASORFIL BFR H 4" ST304/316

    Width SWL STAINLESS STEEL 304 STAINLESS STEEL 316

    DESCRIPTION inch mm (Lbs/ft) d=5ft (kg/m) d=1,5 REF. kg/m LBS/FT REF. kg/m LBS/FT

    BFR 8"X4" 8" 200 51 76 2/0315 1.69 1.13 2/7427 1.69 1.13 BFR 12"X4" 12" 300 51 76 2/0316 2.05 1.37 2/7428 2.05 1.37 BFR 16"X4" 16" 400 55 83 2/0317 2.41 1.61 2/7429 2.41 1.61 BFR 20"X4" 20" 500 55 83 2/0318 2.77 1.85 2/7430 2.77 1.85 BFR 24"X4" 24" 600 55 83 2/0319 3.14 2.09 2/7431 3.14 2.09

    To assemble cable trays with a width of 8 or less, its necessary to use a bolt-washer set for each of the cable trays side, with reference number 2/4915 in St304. For wider cable trays, an additional bolt-washer set should be used as a central union joint too.

    In SS316 on request.

    BASORFIL BFR H 6" ST304/316

    Width SWL STAINLESS STEEL 304 STAINLESS STEEL 316

    DESCRIPTION inch mm (Lbs/ft) d=5ft (kg/m) d=1,5 REF. kg/m LBS/FT REF. kg/m LBS/FT

    BFR 8"X6" 8" 200 51 76 UR 2.05 1.37 UR 2.05 1.3

Recommended

View more >