RESISTANCE HEATING CABLE

nVent.com/CADDY | 1

WIRE BASKET TRAY CLIP

KBT

FEATURES

• Attaches wire basket tray to strut without any additional hardware.

• Fits tray wires from 4mm to 8mm (3/16” to 5/16”).

• No tools required.

The nVent CADDY KBT Wire Basket Tray Clip is an easy-to-install time-saving solution for securely attaching wire basket tray to strut. Simply place the basket tray on top of the strut, position the KBT clip over the tray at the desired position, squeeze the KBT and slide it in place to finish the connection - that simple! The installation is completed without any tools or additional hardware. The KBT Wire Basket Tray Clip is another time-saving solution designed to help the construction industry complete projects faster, easier, and more efficiently.

Part Number Article Number

L W

Finish(in) (mm) (in) (mm)

KBT 170011 2.9 74 0.6 16 CADDY ARMOUR

* For trays 300mm (12”) or under use 2 clips per strut support. * For trays 457mm (18”) or under use 3 clips per strut support. * For larger trays add one (1) clip per strut support for every 150mm (6”) of tray width. * For positioning only (no load rating).

WARNING nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at nVent.com/ERICO and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and/or death, and void your warranty.

©2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.

CADDY-DS-F1062S-DF300LT11WWEN-EN-1805

Our powerful portfolio of brands:

CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER