amt-200s maint manual

Download AMT-200S Maint Manual

Post on 26-Oct-2014

127 views

Category:

Documents

8 download

Tags:

Embed Size (px)

TRANSCRIPT

AMT 200S

MAINTENANCE MANUAL200-25

MAINTENANCE MANUAL AMT 200SSECTION 1 - DESCRIPTIONS, SYSTEMS, RIGGINGS AND PLACARDS 1. Motorglider Characteristics 1.1 Basic Dimensions Wing span Wing span with winglets (optional) Wing span (wings folded) Length Maximum height 1.2 Wings Wing surface (area) Dihedral Profile Angle of incidence Wing torsion 1.3 Ailerons Percent to wing chord (depth) Aileron span Aileron surface (area) 1.4 Airbrakes Position Airbrake span Type at 45% of wing chord 4.76 ft (1.45 m) Schempp hirth on upper wing surface 30% 10.24 ft (3.12 m) 7.32 Sqft (0.68 m2) 201.29 Sqft (18.70 m2) 2 30' Naca 643618 2 -2 57.32 ft (17.47 m) 57.97 ft (17.67 m) 33.30 ft (10.15 m) 26.50 ft (8.08 m) 6.33 ft (1.93 m)SECTION:1

1.5

Horizontal Stabilizer Horiz. stabilizer span Horiz. stabilizer surface (area) Elevator surface Horiz. stabilizer - angle of incidence 12.07 ft (3.68 m) 31.21 Sqft (2.90 m2) 10.23 Sqft (0.95 m2) -1

Page 1.1MM - 200-25

August 10, 2004 - Rev. 8

MAINTENANCE MANUAL AMT 200SSECTION:1

1.6

Vertical Empennage Vertical empennage surface (area) Rudder surface (area) 22.93 Sqft (2.13m2) 7.42 Sqft (0.69m2)

1.7

Landing Gear Conventional: Two main gears with a tail wheel coupled at the rudder. For ground operation the tail wheel disengages automaticaly when the minimum curve radius is reached. Main landing gear shock absorber: Pressure 130 psi ( 9,14 kg/cm2) >0C Pressure 145 psi (10,19 kg/cm2)