Adding a Printer in Windows 7 and Windows 10

1. Select File Explorer from taskbar

2. Select the print server which supports your location (ADMINPRINT, HSPRINT, MSPRINT, or ELEMPRINT) then plug

that name into the example below:

Type the following \\ADMINPRINT\ in the box displaying THIS PC > ENTER

3. A list should populate. Scroll to desired printer or narrow selection by

searching for campus name or model number in the top right hand corner

4. Once printer has been located and selected> right click> Connect

5. You may see the following message briefly during the install but it should close on

its own. There will be no additional message confirming completion of installation.

6. Windows 10 - From Control Panel select Devices and Printers and

verify the printer is displayed

6. Windows 7 - Open Devices and Printers and verify the printer is displayed

Windows 7 – Your printer should be displayed here