ygs stud setter - danhydra.com · ygs stud setter description: the ygs stud setter is a tool for...

1
YGS Stud Setter Description: The YGS Stud Setter is a tool for mounting studbolts. You mount it on an electrical spanner, and screws the bolt down to its position. To take it off the bolt, you drive reverse with the spanner. There is a piece of POM mounted on the tool who can drive free around the tool, so you can hold on to that when running. Material: Steel C45E + SL EN10278 Surface treatment: Electro galvanized 8 µ Handle made of Polyoxymethylene (POM) Safety when operating Stud Setter: Safety glasses Safety footwear Ear protection Head protection DO NOT WEAR GLOVES! Instructions 1. Place the unit in the electricial spanner (Picture ) 2. Use the electricial spanner to insert studbolts (Picture ) 3. Hold one hand on the elecial spanner, and the other hand on the black piece of POM 4. Screw down your studbolts Quick specs. Your Global Solution APS • Nygade 19 • DK-6920 Videbaek • T +45 7217 0262 WWW.YGS.DK [email protected] • Cvr-nr.32944523 WWW.YGS.DK Standard sizes: M16, M20, M24, M30, M36, M39, M42 Standard for 1/2" spanner Any size can be made upon request

Upload: others

Post on 07-Sep-2019

34 views

Category:

Documents


4 download

TRANSCRIPT

Page 1: YGS Stud Setter - danhydra.com · YGS Stud Setter Description: The YGS Stud Setter is a tool for mounting studbolts. You mount it on an electrical spanner, and screws the bolt down

YGS Stud SetterDescription:

The YGS Stud Setter is a tool for mounting studbolts. You mount it on an electrical spanner, and screws the bolt down to its position. To take it off the bolt, you drive reverse with the spanner. There is a piece of POM mounted on the tool who can drive free around the tool, so you can hold on to that when running.

Material: Steel C45E + SL EN10278

Surface treatment: Electro galvanized 8 µ

Handle made of Polyoxymethylene (POM)

Safety when operating Stud Setter:

• Safety glasses• Safety footwear• Ear protection• Head protection• DO NOT WEAR GLOVES!

Instructions

1. Place the unit in the electricial spanner (Picture )2. Use the electricial spanner to insert studbolts (Picture )3. Hold one hand on the elecial spanner, and the other hand on the black

piece of POM4. Screw down your studbolts

Quick specs.

Your Global Solution APS • Nygade 19 • DK-6920 Videbaek • T +45 7217 0262WWW.YGS.DK • [email protected] • Cvr-nr.32944523

WWW.YGS.DK

Standard sizes: M16, M20, M24, M30, M36, M39, M42

Standard for 1/2" spanner

Any size can be made upon request