YGS Stud SetterDescription:
The YGS Stud Setter is a tool for mounting studbolts. You mount it on an electrical spanner, and screws the bolt down to its position. To take it off the bolt, you drive reverse with the spanner. There is a piece of POM mounted on the tool who can drive free around the tool, so you can hold on to that when running.
Material: Steel C45E + SL EN10278
Surface treatment: Electro galvanized 8 µ
Handle made of Polyoxymethylene (POM)
Safety when operating Stud Setter:
• Safety glasses• Safety footwear• Ear protection• Head protection• DO NOT WEAR GLOVES!
Instructions
1. Place the unit in the electricial spanner (Picture )2. Use the electricial spanner to insert studbolts (Picture )3. Hold one hand on the elecial spanner, and the other hand on the black
piece of POM4. Screw down your studbolts
Quick specs.
Your Global Solution APS • Nygade 19 • DK-6920 Videbaek • T +45 7217 0262WWW.YGS.DK • [email protected] • Cvr-nr.32944523
WWW.YGS.DK
Standard sizes: M16, M20, M24, M30, M36, M39, M42
Standard for 1/2" spanner
Any size can be made upon request
