yardney industrial catalog

Yardney Water Management Systems, Inc. | 6666 Box Springs Blvd. | Riverside, CA 92507

Industrial Systems

Product Specifications

http://www.yardneyfilters.com

Table of Contents

Media Filtration Sand Media Filters ................................. 3 Deep Bed Sand Media Filters .................. 5 Multi-Media Filters ................................. 7 RCW Sand Media Filters ......................... 9 Granular Activated Carbon Filters ...........11

Automatic Clean Screen Filters Maxi-Flush™ Screen Filters ....................13 Filtaworx® ..........................................17

Centrifugal Sand Separators .....................21

Basket Strainers ......................................25

Pump Suction Screens .............................27

Backwash Valves .....................................29

Synergy™ Automatic Controller .................31

IMA-65 Specialty Media ............................33


Yardney Sand Media filters are designed for the most challenging dirty water conditions with a high performance solution for water filtration down to 20 microns. These durable carbon steel filters utilize a 24" vertical side shell depth for removal of organic and inorganic suspended solids for filtering large volumes of water with very little pressure drop and a long-term value. All Yardney industrial media filters utilize our simple backwash system for ease of operation and consistent water quality. The Yardney automatically controlled filter systems operate for extended periods of time prior to a short backwash cycle.

Removal of Solids Down to 20 Microns

Sand Media Filters

Applications■■ Removal of organic and/or inorganic suspended solids down to 20 microns

■■ Storm water runoff, industrial process water, incoming plant water, waste water clean-up, industrial water for plant reuse

■■ Pre-filtration in applications such as granular activated carbon, reverse osmosis, cartridge or bag filtration and deionized water

■■ 80 psi standard operating pressure (high pressure systems available)

■■ Flow ranges from 10 gpm

Advantages■■ State of the art fabrication provides added strength under pressure and long system life

■■ ASME code shaped head con-struction for durability and safety

■■ Stainless steel wedgewire underdrain

■➤ Ensures structural integrity in the harshest conditions

■➤ Hydraulically balanced to increase effectiveness of backwash while reducing flush frequency and waste of water

■➤ High strength stainless steel wedgewire will withstand a collapse pressure in excess of 600 psi

■■ Standard carbon steel products, 3/16" thick material

■■ Backwash automatically initiated by elapsed time or pressure differential

■■ Yardney easy-entry lid closure with weld tabs for operator safety

■■ Available in welded carbon steel

■■ 3M Scotchkote® 134 fusion bonded epoxy coating on interior surfaces

■■ Made in USA

Industrial Systems

|


Made in USA

Sand Media FiltersSpecifications

Standard product includes:■■ Completely assembled for easy installation

■■ Skid mounted tanks

■■ Yardney easy-entry lid closure with side manway

■■ Valves

■■ Inlet/outlet and backwash manifolds

■■ Controller, solenoids, electrical wire, tubing

■■ Removable underdrain


Available options:■■ ASME code

■■ High pressure

■■ Solar package

■■ PLC controller

■■ Custom filter station layout piping

■■ Air scour

SPECIFICATIONS | INDUSTRIAL | SAND MEDIA FILTERS

Model

Number of

Tanks in System

Standard Flow RangeFiltration

Surface Area (total sq ft)

Backwash Flow Rate(per tank)

Media Requirements(cubic feet) Maximum

Pressure

Inlet/Outlet Pipe Size

Backwash Line Pipe

Size

Minimum Maximum

gpm m3/hr gpm m3/hr gpm m3/hr Gravel 1/2" - 3/4" Media

IL-1824-1A 1 18 4 26 6 1.75 26 6 1 3 100 psi 2" 2"IL-2424-1A 1 32 7 47 11 3.15 47 11 2 5 100 psi 2" 2"IL-1824-2A 2 35 8 53 12 3.50 26 6 2 5 100 psi 3" 2"IL-3024-1A 1 49 11 74 17 4.91 74 17 3 7 100 psi 3" 3"IL-1824-3A 3 53 12 79 18 5.25 26 6 3 8 100 psi 3" 2"IL-2424-2A 2 63 14 95 22 6.30 47 11 3 9 100 psi 3" 2"IL-3624-1A 1 71 16 107 24 7.10 107 24 4 10 100 psi 3" 3"IL-2424-3A 3 95 22 142 32 9.45 47 11 5 14 100 psi 3" 2"IL-3024-2A 2 98 22 147 33 9.82 74 17 5 14 100 psi 4" 2"IL-4824-1A 1 126 29 189 43 12.60 189 43 7 21 80 psi 4" 4"IL-3624-2A 2 142 32 213 48 14.20 107 24 8 20 100 psi 4" 4"IL-3024-3A 3 147 33 221 50 14.73 74 17 8 21 100 psi 4" 2"IL-5424-1A 1 159 36 238 54 15.90 239 54 10 23 80 psi 4" 4"IL-3624-3A 3 213 48 320 73 21.30 107 24 12 30 100 psi 4" 4"IL-4824-2A 2 252 57 378 86 25.20 189 43 14 42 80 psi 6" 4"IL-5424-2A 2 318 72 476 108 31.80 239 54 19 46 80 psi 6" 4"IL-4824-3A 3 378 86 567 129 37.80 189 43 21 63 80 psi 6" 4"IL-5424-3A 3 477 108 714 162 47.70 239 54 29 69 80 psi 6" 4"IL-4824-4A 4 504 115 756 172 50.40 189 43 28 84 80 psi 8" 4"IL-4824-5A 5 630 143 945 215 63.00 189 43 35 105 80 psi 10" 4"IL-4824-6A 6 756 172 1134 258 75.60 189 43 42 126 80 psi 10" 4"IL-5424-4A 4 636 145 952 216 63.60 239 54 38 92 80 psi 8" 4"IL-5424-5A 5 795 181 1190 270 79.50 239 54 48 115 80 psi 10" 4"IL-5424-6A 6 954 217 1428 325 95.40 239 54 57 138 80 psi 10" 4"

Phone: 951.656.6716 Toll-Free: 800.854.4788 Fax: 951.656.3867 [email protected]

© 2015 Yardney Water Management Systems, Inc. | 6666 Box Springs Blvd. | Riverside, CA 92507 IND110-08-2015

|



Yardney Deep Bed Sand Media filters are designed for the most challenging dirty water conditions with a high performance solution for water filtration down to 15 microns. These durable carbon steel filters utilize a 36" vertical side shell depth for removal of organic and inorganic suspended solids for filtering large volumes of water with very little pressure drop and a long-term value. All Yardney industrial media filters utilize our simple backwash system for ease of operation and consistent water quality.


Deep Bed Sand Media Filters

Applications■■ Removal of organic and/or inorganic suspended solids down to 15 microns




■■ ASME code shaped head construction for durability and safety








■■ Available in welded carbon steel or stainless steel


■■ Made in USA

Industrial Systems

|


Made in USA

Deep Bed Sand Media FiltersSpecifications




■■ Valves










■■ Air scour

SPECIFICATIONS | INDUSTRIAL | DEEP BED SAND MEDIA FILTERS

Model

Number of

Tanks in System

Standard Flow RangeFiltration




Pressure


Backwash Line Pipe

SizeMinimum Maximum

gpm m3/hr gpm m3/hr gpm m3/hr Gravel 1/2" - 3/4" Media

IL-1836-1A 1 18 4 26 6 1.75 26 6 1 5 100 2" 2"IL-2436-1A 1 32 7 47 11 3.15 47 11 2 8 100 2" 2"IL-1836-2A 2 35 8 53 12 3.50 26 6 2 9 100 3" 2"IL-3036-1A 1 49 11 74 17 4.91 74 17 3 12 100 3" 3"IL-1836-3A 3 53 12 79 18 5.25 26 6 3 14 100 3" 2"IL-2436-2A 2 63 14 95 22 6.30 47 11 3 15 100 3" 2"IL-3636-1A 1 71 16 107 24 7.10 107 24 4 17 100 3" 3"IL-2436-3A 3 95 22 142 32 9.45 47 11 5 23 100 3" 2"IL-3036-2A 2 98 22 147 33 9.82 74 17 5 24 100 4" 2"IL-4836-1A 1 126 29 189 43 12.60 189 43 7 34 80 4" 4"IL-3636-2A 2 142 32 213 48 14.20 107 24 8 34 100 4" 4"IL-3036-3A 3 147 33 221 50 14.73 74 17 8 36 100 4" 2"IL-3636-3A 3 213 48 320 73 21.30 107 24 12 51 100 4" 4"IL-4836-2A 2 252 57 378 86 25.20 189 43 14 67 80 6" 4"IL-4836-3A 3 378 86 567 129 37.80 189 43 21 101 80 6" 4"IL-4836-4A 4 504 115 756 172 50.40 189 43 28 134 80 8" 4"IL-4836-5A 5 630 143 945 215 63.00 189 43 35 168 80 10" 4"IL-4836-6A 6 756 172 1134 258 75.60 189 43 42 201 80 10" 4"



|



Yardney Multi-Media filters are designed for enhanced water quality filtration for the removal of organic and inorganic suspended solids down to 5 microns. Multi-Media filters may be used as a stand-alone system or in conjunction with or as a pretreatment for other filtration technologies. The Multi-Media Filtration Systems utilize a vertical side shell depth of 60" with accompanied reverse stacked medias for progressive filtration through the filtration system. All Yardney industrial media filters utilize our simple backwash system for ease of operation and consistent water quality.


Multi-Media Filters

Applications■■ Removal of organic and/or inorganic suspended solids down to 5 microns with enhanced solids capacity vs. single media sand filtration


■■ Pre-filtration in applications such as granular activated carbon, reverse osmosis, cartridge or bag filtration and deionized water














■■ Made in USA

Industrial Systems |


Made in USA

Multi-Media FiltersSpecifications




■■ Valves










■■ Air scour

■■ Continuous flow

■■ Rinse to waste

SPECIFICATIONS | INDUSTRIAL | MULTI-MEDIA FILTERS

Model

Number of

Tanks in System

Standard Flow Range Filtration Surface

Area (total sq ft)


Media Requirements(cubic feet per tank) Maximum

Pressure


Backwash Line Pipe

SizeMinimum Maximum

gpm m3/hr gpm m3/hr gpm m3/hr Gravel 1/2" - 3/4"

Garnet 1.45 mm

Garnet 0.35 mm

Anthracite 0.75 mm

MM-1860-1A 1 9 2 26 6 1.77 27 6 1 1 2.5 2.5 100 psi 2" 2"MM-2460-1A 1 16 4 47 11 3.15 47 11 2 2 5 5 100 psi 2" 2"MM-1860-2A 2 18 4 53 12 3.54 27 6 1 1 2.5 2.5 100 psi 2" 2"MM-3060-1A 1 25 6 74 17 4.91 74 17 3 3 8 8 100 psi 3" 3"MM-1860-3A 3 27 6 79 18 5.31 27 6 1 1 2.5 2.5 100 psi 3" 2"MM-2460-2A 2 32 7 95 22 6.30 47 11 2 2 5 5 100 psi 3" 2"MM-3660-1A 1 35 8 107 24 7.10 107 24 4 4 11 11 100 psi 3" 3"MM-2460-3A 3 48 11 142 32 9.45 47 11 2 2 5 5 100 psi 3" 2"MM-3060-2A 2 50 11 147 33 9.82 74 17 3 3 8 8 100 psi 4" 2"MM-4860-1A 1 63 14 189 43 12.60 189 43 7 7 19 19 80 psi 4" 4"MM-3660-2A 2 70 16 213 48 14.20 107 24 4 4 11 11 100 psi 4" 4"MM-3060-3A 3 75 17 221 50 14.73 74 17 3 3 8 8 100 psi 4" 2"MM-5460-1A 1 80 18 239 54 15.91 239 54 10 8 24 24 80 psi 4" 4"MM-3660-3A 3 105 24 320 73 21.30 107 24 4 4 11 11 100 psi 4" 4"MM-4860-2A 2 126 29 378 86 25.20 189 43 7 7 19 19 80 psi 6" 4"MM-5460-2A 2 160 36 477 108 31.82 239 54 10 8 24 24 80 psi 6" 4"MM-4860-3A 3 189 43 567 129 37.80 189 43 7 7 19 19 80 psi 6" 4"MM-5460-3A 3 240 55 716 163 47.73 239 54 10 8 24 24 80 psi 6" 4"MM-4860-4A 4 252 57 756 172 50.40 189 43 7 7 19 19 80 psi 8" 4"MM-4860-5A 5 315 72 945 215 63.00 189 43 7 7 19 19 80 psi 10" 4"MM-5460-4A 4 320 73 955 217 63.64 239 54 10 8 24 24 80 psi 8" 4"MM-4860-6A 6 378 86 1134 258 75.60 189 43 7 7 19 19 80 psi 10" 4"MM-5460-5A 5 400 91 1193 271 79.55 239 54 10 8 24 24 80 psi 10" 4"MM-5460-6A 6 480 109 1432 325 95.46 239 54 10 8 24 24 80 psi 10" 4"



|



Yardney RCW (Recirculating Water) Sand Media Filtration Systems are designed specifically for the filtration and removal of suspended solids from recycled cooling tower or plant process water. Suspended solid contaminants in the cooling tower system significantly reduce heat transfer capability and increase plant operating costs. The Yardney RCW system offers a high performance solution for filtration down to 15 microns and utilizes our simple backwash system for ease of operation and consistent water quality.

Applications■■ Removal of algae, slime or other organic contaminant as well as sand, rock, grit and other inorganic contaminants

■■ Recycled cooling tower water and industrial process water

■■ 80 psi standard operating pressure (high pressure available up to 225 psi)

■■ Flow ranges from 10 gpm and up











■■ 3M Scotchkote® 134 fusion bonded epoxy coating on interior surfaces of carbon steel product

■■ Made in USA

Cooling Tower Filters

RCW Sand Media Filters

Industrial Systems

|


Made in USA

RCW Sand Media FiltersSpecifications

Standard assembly includes:■■ Completely assembled for easy installation including pump, motor and motor starter



■■ Valves


■■ Grooved couplings on manifolds



■■ 3M Scotchkote® 134 fusion bonded epoxy coating on interior surfaces of carbon steel product


■■ High pressure (up to 225 psi)




*Inlet pipe size denotes pump connection. Supply pipe size should be one pipe size larger. FIPT inlet/outlet.

Filtration backwash processYardney cooling tower filtration systems are designed to remove inorganic and organic suspended solids while utilizing an automatically controlled backwashing system based on pressure differential or elapsed time. The backwashing function utilizes a portion of the clean filtered water produced

by multiple tank systems to backwash the media bed in each tank until the entire system has been fully backwashed. Single tank systems utilize the cooling tower water for backwash water or external backwash water sourcing systems, available for both single and multiple tank systems.

SPECIFICATIONS | RCW Sand Media Filters

Model NumberRated Flow (gph)

Filtration Area (sq ft)

Back-wash (gpm)

Rated Pressure

Pump HP

Inlet/Outlet

*pipe size (inches)

Length (inches)

Width (inches)

Height (inches)

Approx. Ship

Weight (lbs)

Approx. Oper. Wt. (lbs)

RCW 1424-1A 1320 1.1 16 100 psi 0.5 1 1/4 / 2 59 1/16 27 67 5/8 600 710RCW 1824-1A 2160 1.8 27 100 psi 1.0 1 1/4 / 2 59 3/4 25 5/16 67 9/16 790 970RCW 2424-1A 3720 3.1 47 100 psi 1.5 1 1/2 / 2 61 9/16 29 13/16 67 9/16 1140 1470RCW 3024-1A 6000 4.9 74 100 psi 3.0 2 / 3 71 1/8 33 3/8 67 7/16 1690 2220RCW 2424-2A 7560 6.3 47 100 psi 5.0 2 / 3 67 11/16 28 3/16 66 1/4 2080 2760RCW 3624-1A 8520 7.1 106 100 psi 3.0 3 / 3 70 11/16 39 1/2 70 5/8 2280 3070RCW 3024-2A 12000 9.8 74 100 psi 7.5 2 1/2 / 3 79 3/4 30 7/8 67 13/16 2970 4040RCW 4824-1A 15000 12.5 188 80 psi 5.0 3 / 4 93 5/8 51 1/2 79 15/16 4260 6000RCW 3624-2A 16920 14.1 106 100 psi 10.0 3 / 4 92 9/16 39 1/2 76 7/8 4370 6000RCW 4824-2A 30000 25.0 188 80 psi 20.0 4 / 6 120 51 1/2 85 3/16 8050 11660RCW 4824-3A 45000 37.5 188 80 psi 25.0 4 / 6 179 1/2 51 1/2 84 11/16 12130 17560RCW 4824-4A 60000 50.0 188 80 psi 30.0 6 / 8 222 51 1/2 84 9/16 16000 23550



|



Yardney Granular Activated Carbon (GAC) filtration systems utilize the adsorptive qualities of the media to remove highly dispersed compounds from water sources which are too small for removal with standard multi-media filtration technology. These automatic filtration systems are extremely effective in removing chlorine and chlorine related compounds, organic chemicals, tastes and odors, halogenated organic compounds, hydrocarbons and other highly dispersed contaminants. Yardney GAC filtration systems utilize a vertical side shell depth of 72 inches. All Yardney industrial media filters utilize our simple backwash system for ease of operation and consistent water quality. The Yardney automatically controlled filter systems operate for extended periods of time prior to a short backwash cycle.

Removal of Dissolved Compounds by Adsorption

Granular Activated Carbon Filters

Applications■■ Removal of chlorines, organic chemicals, taste and odor, halogenated organic compounds, hydrocarbons or other highly dispersed contaminants

■■ Polishing filter for contaminants not removed by other filtration systems














■■ Made in USA



Made in USA

Granular Activated Carbon FiltersSpecifications




■■ Valves










■■ Air scour

■■ Continuous flow

■■ Rinse to waste

SPECIFICATIONS | INDUSTRIAL | GRANULAR ACTIVATED CARBON FILTERS

Model

Number of

Tanks in System

Standard Flow Ranges (taste, odor removal) Chlorine

Removal (gpm)

Activated Carbon Volume (cu ft)

Filtration Surface

Area (total sq ft)



Pressure

Inlet/Outlet

Pipe Size

Backwash Line Pipe

SizeMinimum Maximum

gpm m3/hr gpm m3/hr gpm m3/hr Gravel 1/2" - 3/4"

Activated Carbon

GAC-1872-1A 1 9 2 18 4 35 7 1.77 18 4 1 7 100 psi 2" 2"GAC-2472-1A 1 16 4 32 7 60 13 3.15 32 7 2 13 100 psi 2" 2"GAC-1872-2A 2 18 4 35 8 71 14 3.54 18 4 2 14 100 psi 2" 2"GAC-3072-1A 1 25 6 50 11 90 20 4.91 49 11 3 20 100 psi 3" 3"GAC-1872-3A 3 27 6 53 12 106 21 5.31 18 4 3 21 100 psi 3" 2"GAC-2472-2A 2 32 7 64 15 120 25 6.30 32 7 3 25 100 psi 3" 2"GAC-3672-1A 1 35 8 70 16 135 28 7.10 71 16 4 28 100 psi 3" 3"GAC-2472-3A 3 48 11 94 21 180 38 9.45 32 7 5 38 100 psi 3" 2"GAC-3072-2A 2 50 11 100 23 180 39 9.82 49 11 5 39 100 psi 4" 2"GAC-4872-1A 1 63 14 126 29 240 50 12.60 126 29 7 50 80 psi 4" 4"GAC-3672-2A 2 70 16 140 32 270 56 14.20 71 16 8 56 100 psi 4" 4"GAC-3072-3A 3 75 17 150 34 270 59 14.73 49 11 8 59 100 psi 4" 2"GAC-5472-1A 1 80 18 160 36 300 64 15.91 159 36 10 64 80 psi 4" 4"GAC-3672-3A 3 105 24 210 48 405 84 21.30 71 16 12 84 100 psi 4" 4"GAC-4872-2A 2 126 29 252 57 480 100 25.20 126 29 14 100 80 psi 6" 4"GAC-5472-2A 2 160 36 320 73 600 127 31.82 159 36 19 127 80 psi 6" 4"GAC-4872-3A 3 189 43 378 86 720 150 37.80 126 29 21 150 80 psi 6" 4"GAC-5472-3A 3 240 55 480 109 900 191 47.73 159 36 29 191 80 psi 6" 4"GAC-4872-4A 4 252 57 504 115 960 200 50.40 126 29 28 200 80 psi 8" 4"GAC-4872-5A 5 315 72 630 143 1200 250 63.00 126 29 35 250 80 psi 10" 4"GAC-5472-4A 4 320 73 640 145 1200 254 63.64 159 36 38 254 80 psi 8" 4"GAC-4872-6A 6 378 86 756 172 1440 300 75.60 126 29 42 300 80 psi 10" 4"GAC-5472-5A 5 400 91 800 182 1500 318 79.55 159 36 48 318 80 psi 10" 4"GAC-5472-6A 6 480 109 960 218 1800 381 95.46 159 36 57 381 80 psi 10" 4"



|



Automatic Backwash System

Maxi-Flush™ Screen Filters

Industrial Systems

|



Yardney Maxi-Flush automatic backwash screen filters provide the ultimate in high rate screen filter performance. Built for durable trouble-free service, the filter and cartridge have no internal moving parts to wear out, break down or replace. The field changeable stainless steel filter cartridge requires no maintenance and is constructed with a burst strength in excess of 400 psi.

Time. Quality. Experience. Knowledge.

Applications■■ For surface water with high concentration of algae and other organic materials

■■ Industrial process water, incoming plant water, waste water clean-up, industrial water for plant reuse

■■ Removal of algae, slime or other organic contaminant as well

as sand, rock, grit and other inorganic contaminants with fine filtration down to 200 mesh or 75 microns



Advantages■■ Heavy-duty, durable backwashable welded stainless steel wedgewire screen filter

■■ Rugged, field-changeable, washable and replaceable welded stainless steel wedgewire filter mesh available in 40, 80, 100, 150, 200 mesh

■■ Wedgewire screen cartridge produces long run times between backwash cycles


■■ No moving parts to wear out

■■ Yardney easy-entry lid closure



■■ Exterior of housing is coated with UV stabilized polyester powder coat for longer product life and greater protection from the environment

■■ Made in USA


Maxi-Flush™ Screen Filters

|

Automatic Backwash OperationThe patented Yardney 3-way backwash valve controls the highly effective reverse flow backwashing of the Maxi-Flush system. During the brief backwashing cycle a portion of the clean water produced by the system is diverted to the filter housing undergoing backwashing. This flow of clean water frees contaminants from the cartridge while discharging these contaminants from the system and restoring the filter back to a clean filter condition. Each filter housing is sequentially backwashed until the entire system is clean.

*Vertical configurations also available for limited space applications. Please see our website for additional information.

SPECIFICATIONS | MAXI-FLUSH | Horizontal

Model Number of Housings

Maximum Flow Filtration Surface Area (total sq ft)

Backwash Flow Rate (per

housing)Maximum Pressure

Inlet/Outlet

Flush Port

gpm m3/hr gpm m3/hrMFS 6-2 2 250 57 4.6 60 14 150 psi 4" 2"MFS 8-2 2 500 114 6.7 80 18 150 psi 6" 2"MFS 8-3 3 750 170 10.1 80 18 150 psi 6" 2"MFS 10-2 2 1000 227 16.0 190 43 150 psi 8" 4"MFS 10-3 3 1500 341 24.0 190 43 150 psi 8" 4"MFS 10-4 4 2000 455 32.0 190 43 150 psi 10" 4"MFS 10-5 5 2500 568 40.0 190 43 150 psi 10" 4"MFS 10-6 6 3000 682 48.0 190 43 150 psi 12" 4"MFS 10-7 7 3500 795 56.0 190 43 150 psi 12" 4"MFS 10-8 8 4000 909 64.0 190 43 150 psi 14" 4"MFS 10-9 9 4500 1023 72.0 190 43 150 psi 14" 4"MFS 10-10 10 5000 1136 80.0 190 43 150 psi 14" 4"

DIMENSIONS | Horizontal

Model A B C D E F GMFS 6-2 18 9/16" 26 7/8" 6" 19 3/4" 42 5/8" 27 1/4" 29 7/16"MFS 8-2 22 5/8" 24 1/8" 8" 25" 40 1/16" 27 1/4" 33 5/8"MFS 8-3 22 5/8" 24 1/8" 8" 25" 40 1/16" 40 3/8" 33 5/8"MFS 10-2 28 1/8" 48 13/16" 9" 30 3/4" 68 3/4" 30 7/8" 37 3/16"MFS 10-3 28 1/8" 48 13/16" 9" 30 3/4" 68 3/4" 46 1/8" 37 3/16"MFS 10-4 30 3/16" 48 13/16" 10" 32 13/16" 68 3/4" 62 3/8" 39 1/4"MFS 10-5 30 3/16" 48 13/16" 10" 32 13/16" 68 3/4" 77 5/8" 39 1/4"MFS 10-6 30 1/8" 48 13/16" 11" 32 3/4" 70 3/16" 111 11/16" 39 1/4"MFS 10-7 30 1/8" 48 13/16" 11" 32 3/4" 70 3/16" 130 7/16" 39 1/4"MFS 10-8 33 3/16" 48 13/16" 13" 35 13/16" 72 13/16" 149 1/2" 42 1/4"MFS 10-9 33 3/16" 48 13/16" 13" 35 13/16" 72 13/16" 164 3/4" 42 1/4"MFS 10-10 33 3/16" 48 13/16" 13" 35 13/16" 72 13/16" 180" 42 1/4"

|

Made in USA

Maxi-Flush Screen FiltersSpecifications

Standard assembly includes:■■ Yardney easy-entry lid closure

■■ Filter element

■■ Valves

■■ Inlet and outlet manifolds

■■ Multiple housings include inlet and outlet manifolds and grooved couplings to connect all components





■■ Available in purple for reclaim water applications

SPECIFICATIONS | MAXI-FLUSH | Vertical

ModelNumber

of Housings

Maximum Flow Filtration Surface Area (total sq ft)

Backwash Flow Rate

(per housing) Maximum Pressure

Inlet/Outlet

Flush Port

gpm m3/hr gpm m3/hr

MFSV 10-4 4 2000 455 32.0 190 43 150 psi 10" 4"MFSV 10-5 5 2500 568 40.0 190 43 150 psi 10" 4"MFSV 10-6 6 3000 682 48.0 190 43 150 psi 12" 4"MFSV 10-7 7 3500 795 56.0 190 43 150 psi 12" 4"MFSV 10-8 8 4000 909 64.0 190 43 150 psi 14" 4"MFSV 10-9 9 4500 1023 72.0 190 43 150 psi 14" 4"MFSV 10-10 10 5000 1136 80.0 190 43 150 psi 14" 4"

DIMENSIONS | Vertical

Model A B C D E

MFSV 10-4 11 7/8" 40" 71 13/16" 63 1/8" 39"MFSV 10-5 11 7/8" 40" 71 13/16" 63 1/8" 53 1/2"MFSV 10-6 12 9/16" 42" 72 9/16" 64 3/4" 54 5/8"MFSV 10-7 12 9/16" 42" 72 9/16" 64 3/4" 69 1/8"MFSV 10-8 13 3/4" 43" 73 11/16" 65 3/4" 69 3/8"MFSV 10-9 13 3/4" 43" 73 11/16" 65 3/4" 83 7/8"MFSV 10-10 13 3/4" 43" 73 11/16" 65 3/4" 83 7/8"



|



Industrial Systems

Filtaworx®

Automatic Self-Cleaning Screen Filter

Industrial Systems

|



Applications■■ Removal of algae, slime or other organic contaminant as well as sand, grit and other inorganic contaminants with fine filtration down to 250 mesh or 50 microns



■■ Cooling towers, industrial process water, incoming plant water, waste water clean-up, industrial water for plant reuse

Advantages■■ Heavy-duty stainless steel filter body

■■ Durable low maintenance self-cleaning mechanism

■■ Wide range of screen mesh sizes available in 20, 40, 80, 100, 120, 150, 200 and 250 mesh

■■ Hydraulically or electrically driven internal cleaning mechanism

■■ Automatic self-cleaning piston action moves in both directions

■■ Sacrificial anode

■■ Automatic operation of the self-cleaning backflush cycle is achieved when a pre-set pressure drop (5–7 psi) across the filter is reached

■■ Sectional screens allow easy replacement of a section of screen versus entire cartridge if damage occurs to the screen

■■ Compact and simple installation can be mounted in any position or orientation, with minimal space requirements

Filtaworx® Automatic Self-Cleaning Screen FilterTime. Quality. Experience. Knowledge.

Minimal moving parts means high reliability in the field.

Twist-lock sectional screens provide easy cartridge replacement.

Heavy-duty stainless steel filter body provides corrosion resistance in most environments.

Yardney Filtaworx automatic self-cleaning screen filters provide excellent protection for industrial and commercial applications. Filtaworx screen filters are one of the most technically innovative self-cleaning filters available combining proven high performance, reliability and economy in a compact robust design.

|

Maximum working pressure 150 psi

Minimum line pressure required during flush cycle 30 psi

Approximate flush time 15-17 sec

Flush volume 40 gal

Maximum working temperature 150 °F

Filtration System Operation■■ During normal filtering mode the raw water enters the inlet of the filter and passes through the coarse screen (the 1/4" perforations remove large debris that may obstruct the lower mechanism).

■■ Water then travels to the inner section of the filter and through the fine screen to the outlet. The solids in the water are trapped on the fine screen, eventually causing a pressure drop (dp) across the filter.

■■ At a pressure drop of 5–7 psi the controller activates the cleaning cycle by opening the flush valve to drain (atmosphere).

■■ The interconnection of the suction nozzles, via the dirt collector to the drain, causes a back flushing or “vacuum clean” effect on the fine screen with a high velocity suction jet of water from the clean side of the screen, removing the dirt on the screen as it passes through.

■■ The water escaping via the rotor causes the dirt collector and suction nozzle assembly to rotate. The piston moves this assembly down and back along the entire length of the fine screen in a spiraling motion, cleaning the screen in approximately 15 seconds.

■■ At completion of flushing, the valve closes and the filter is ready for the next cycle.

|

SPECIFICATIONS | VERTICAL

ModelNominal

Flow Rate(gpm)

Filtration Surface Area

(inches)

Maximum Pressure

Inlet/Outlet

Flush Port A B C X Y

FW02 110 189 150 psi 2" 2" 7 1/4" 7 3/4" 8" 28 3/8" 22"FW02-F 110 189 150 psi 2" Flg 2" 8 1/4" 8 1/4" 8" 28 3/8" 22 5/8"FW03 220 189 150 psi 3" 2" 7 5/8" 8 3/8" 8" 28 3/8" 22 5/8"FW03-F 220 189 150 psi 3" Flg 2" 8 1/4" 8 1/4" 8" 28 3/8" 22 5/8"FW03EX 220 307 150 psi 3" 2" 8 1/4" 12 3/8" 8 1/2" 35 1/2" 27 1/8"FW04 350 307 150 psi 4" 2" 9 1/4" 12 3/8" 8 1/2" 35 1/2" 27 1/8"

SPECIFICATIONS | HORIZONTAL

ModelNominal

Flow Rate(gpm)

Filtration Surface Area

(inches)

Maximum Pressure

Inlet/Outlet

Flush Port A B C E F H L X Y Z

FW04EX 440 870 150 psi 4" 2" 9 1/4" 35 7/16" 18 3/8" 10 3/4" 9" 20 5/8" 76 7/8" 28 3/4" 14 1/4" 143 3/4"FW06 790 870 150 psi 6" 2" 10 5/8" 35 7/16" 19" 12 3/4" 11" 23" 79 3/8" 30 3/4" 14 1/4" 146 1/2"FW06EX 790 1258 150 psi 6" 2" 10 5/8" 35 7/16" 33 1/4" 12 3/4" 11" 23" 93 3/4" 30 3/4" 14 1/4" 174 1/2"FW08 1400 1258 150 psi 8" 2" 10 5/8" 35 7/16" 38" 12 3/4" 15 1/4" 23" 102 7/8" 30 3/4" 15" 183 1/2"FW10 1760 1258 150 psi 10" 2" 12 1/4" 35 7/16" 38" 14" 15 1/4" 23 1/2" 102 7/8" 31 1/2" 15 3/4" 183 1/2"FW10EX 1760 1614 150 psi 10" 2" 12 1/4" 43 5/16" 38" 16" 26 7/8" 26 1/4" 122 1/4" 34 1/4" 16 1/2" 209"FW12 2640 1614 150 psi 12" 2" 12 1/4" 43 5/16" 38" 16" 26 7/8" 26 1/4" 122 1/4" 34 1/4" 16 1/2" 209"FW14 3960 1886 150 psi 14" 2" 12 1/4" 50" 38" 16" 20 1/8" 26 1/4" 122 1/4" 34 1/4" 17 3/4" 209"

Filtaworx® Automatic Self-Cleaning Screen FilterSpecifications

Standard assembly includes:■■ 304 stainless steel body with flanged inlet and outlet

■■ 316 stainless steel mesh fine screens

■■ Brass, glass reinforced nylon, NBR and EPDM seals

■■ Hydraulic controller

■■ Sacrificial anode

Available options:■■ 316 stainless steel housing available on request


■■ Electric controller

■■ Sustaining valve (highly recommended)

www.yardneyfilters.com

Made in USA

Phone: 951.656.6716 Toll-Free: 800.854.4788 Fax: 951.656.3867 [email protected] |

BY



For Centrifugal Removal of Sand, Silt and Gravel from Water

Centrifugal Sand Separators

Industrial Systems

|



Yardney Centrifugal Sand Separators are ideal for removal of suspended solids and inorganic materials with a specific gravity of 2 or greater. This highly effective system will provide consistent, simple removal of inorganic material down to 75 microns. Easily installed, these carbon steel units are rated to 150 psi with threaded or flanged inlet/outlet connections. Smaller models are designed for vertical installation while larger models are angled and floor or ground mounted.

Sizing must be within the specified flow range for proper centrifugal action. Larger flow separators and custom designed systems are available.

Applications■■ Removal of sand, rock, grit and other inorganic contaminants with fine filtration down to 200 mesh or 75 microns




■■ Removal of solids with a specific gravity of 2 or greater

■■ Serves as an excellent pre-filter to allow for improved sand media or screen filter performance by removing the gross solids from the water source

Advantages■■ Sand removal efficiency of 98% of solids down to 200 mesh or 75 microns

■■ Multiple units in series provide higher efficiencies of filtration

■■ Units are available in ASME code or non-code construction

■■ Available with a manual or automatic solids purge valve system

■■ Special alloys and coatings are available for prolonged life in required applications

■■ Made in USA


Centrifugal Sand Separators

|

Standard assembly includes:■■ Welded carbon steel

■➤ Vertical models include female threaded inlet and outlet connections and a threaded purge port for purging of contaminants or hookup of automatic flush valve

■➤ Angled models include flanged inlet and outlet connections and a threaded purge port for purging of contaminants or hookup of automatic flush valve



■■ Special metal alloys and coatings for extended product life

■■ Ability to disassemble unit for inspection through flanged manways

■■ Automatic purge valve for flushing

■■ Wall mount kit on smaller units

SPECIFICATIONS | CENTRIFUGAL SAND SEPARATOR | Angled

ModelMinimum Flow Maximum Flow Inlet/Outlet ANSI

150# Raised Face Flange

Purge Port

Particle Size Maximum

gpm m3/hr gpm m3/hr

PCS-40LA 200 45 400 91 4" 2" 1 1/2"PCS-60LA 365 83 960 218 6" 2" 1 1/2"PCS-80LA 800 182 1600 364 8" 2" 1 1/2"PCS-100LA 1300 295 2300 523 10" 2" 1 1/2"PCS-120LA 2025 460 3400 773 12" 2" 1 1/2"PCS-140LA 2975 676 5000 1136 14" 2" 2"PCS-160LA 4000 909 6200 1409 16" 2" 2"PCS-180LA 5100 1159 8300 1886 18" 2" 2"

SPECIFICATIONS | CENTRIFUGAL SAND SEPARATOR | Vertical

ModelMinimum Flow Maximum Flow Inlet/Outlet

NPT ThreadedPurge Port

Particle Size Maximumgpm m3/hr gpm m3/hr

PCS-5V 4 1 10 2 1/2" 1" 3/8"PCS-7V 10 2 20 5 3/4" 1" 3/8"PCS-10V 18 4 38 9 1" 1" 1/2"PCS-12V 26 6 52 12 1 1/4" 1" 1/2"PCS-15V 38 9 79 18 1 1/2" 1" 1/2"PCS-20V 63 14 120 27 2" 2" 1/2"PCS-25V 100 23 180 41 2 1/2" 2" 1/2"PCS-30V 125 28 260 59 3" 2" 1/2"PCS-40V 190 43 345 78 4" 2" 1/2"

Liquid/solid mix enters unit tangentially, inducing centrifugal action

Clean water is drawn out through the separator’s vortex action

Centrifugal action moves heavier particles to sides of the separator

Solids drop into the collection chamber and are then purged as required

|

Made in USA

Centrifugal Sand SeparatorsSpecifications

DIMENSIONS | Angled

Model A B C D E F G H I J KPCS-40LA 48 1/2" 46 1/2" 46 1/2" 16 11/16" 16" 7 1/2" 19" 4" 6 5/8" 12" 80"PCS-60LA 63" 59 1/2" 60 3/8" 20 1/2" 20 3/4" 10 1/2" 22" 5 1/4" 10 3/4" 16" 106 1/4"PCS-80LA 71" 65" 66" 21 3/4" 22 5/8" 12" 24 1/2" 5 5/8" 12 3/4" 18" 114"PCS-100LA 78" 71" 72 3/4" 21" 24 1/2" 13" 29" 7" 16" 22" 123 1/2"PCS-120LA 102" 75 1/4" 76 1/2" 23 3/4" 26 5/8" 14 1/4" 32" 8 1/8" 18" 26" 139"PCS-140LA 102 1/2" 85 3/8" 86 5/8" 24 1/2" 27 3/4" 12" 33 1/2" 9" 20" 28" 152 1/2"PCS-160LA 108" 89 1/4" 90" 24 3/8" 29" 12" 33 1/2" 9" 24" 30" 160"PCS-180LA 118 1/2" 98 1/4" 100 1/4" 27" 33 5/8" 15" 34 1/2" 11" 28" 36" 177"

DIMENSIONS | Vertical

Model A B C DPCS-5V 21 1/2" 6" 2 3/8" 2 1/2"PCS-7V 21 1/2" 6" 2 3/8" 2 1/2"PCS-10V 30 1/2" 6" 3 1/2" 2 3/4"PCS-12V 30 1/2" 6" 3 1/2" 3"PCS-15V 30 1/2" 6" 3 1/2" 3 1/8"PCS-20V 38" 8" 4 1/2" 3 5/8"PCS-25V 43 3/4" 10" 4 1/2" 4 1/2"PCS-30V 47 1/2" 10" 5 9/16" 5"PCS-40V 49" 12" 6 5/8" 6"

109876

5

4

3

100

200

300

400

500

600

700

800

900

1000

2000

3000

4000

5000

6000

7000

8000

9000

1000

0

PCS-4

0A

PCS-6

0A

PCS-8

0A

PCS-1

00A

PCS-1

20A

PCS-1

40A

PCS-1

60A

PCS-1

40A

Flow (gpm)

Pres

sure

Dro

p (p

si)

PCS-5

V

PCS-7

V

PCS-1

0V

PCS-1

2V

PCS-1

5V

PCS-2

0V

PCS-2

5V

PCS-3

0V

PCS-4

0V

Pres

sure

Dro

p (p

si) 10

9876

5

4

3

3 4 5 6 7 8 9 10 20 30 40 50 60 70 80 90 100

200

300

400

Flow (gpm)


© 2015 Yardney Water Management Systems, Inc. | 6666 Box Springs Blvd. | Riverside, CA 92507 YLT100-03-2015© 2015 Yardney Water Management Systems, Inc. | 6666 Box Springs Blvd. | Riverside, CA 92507 IND102-08-2015

|



Yardney Basket Strainers are a low-cost filter solution designed to be used for the removal of inorganic contaminants. Basket Strainers trap gross contaminants and are able to withstand a substantial amount of loading without failure. When used as a secondary filter the basket strainer is intended to capture contaminants that may enter the system as a result of a pipeline break or system malfunction.

Manual Clean

Basket Strainers

Applications■■ Removal of sand, rock, grit and other inorganic contaminants with fine filtration down to 200 mesh or 75 microns

■■ Industrial process water, incoming plant water, waste water clean up, industrial water for plant reuse



■■ Can be used as a primary filter in specific applications

■■ Can be used as a secondary filter to a sand media filter, centrifugal separator or other primary filtration system

■■ For plant or equipment process water use primarily designed for the removal of inorganic material

Advantages■■ Heavy-duty, durable and low-cost screen filter

■■ Rugged, washable and replaceable polypropylene filter mesh sock available in 80, 100, 150, and 200 mesh




■■ Exterior of housing is coated with UV stabilized polyester powder coat for longer product life and greater protection from the environment

■■ Made in USA



Made in USA

Basket StrainersSpecifications

Standard assembly includes:■■ Carbon steel housing



■■ Polyester powder coating on exterior surfaces

■■ Internal stainless steel basket with field replaceable filter mesh

■■ 3-way valve

■■ Pressure gauge

■■ Tubing with fittings

■■ Drain valve



■■ Grooved or flanged mainline connections

■■ Available in purple for reclaim water applications

SPECIFICATIONS | BASKET STRAINERS

ModelMaximum Flow Filtration


Maximum Pressure

Inlet/Outlet

DIMENSIONS

gpm m3/hr A B C D E

SB 2 110 25 0.44 150 psi 2" 13 5/8" 3 1/8" 4 3/4" 11 5/8" 11"SB 3 250 57 1.01 150 psi 3" 18 1/8" 5 1/4" 6 1/4" 12 1/2" 13"SB 4 355 81 1.01 150 psi 4" 18 1/8" 5 1/4" 6 1/4" 12 1/2" 13"SB 6 950 216 2.96 80 psi 6" 30 5/8" 8 1/4" 14 1/4" 18 3/4" 15 7/8"SB 8 1250 284 2.57 80 psi 8" 31 5/8" 10 3/4" 12 1/4" 20 3/4" 18 1/8"SB 10 1875 426 5.59 80 psi 10" 41 7/8" 15" 16 1/2" 24" 19 3/4"



|



Whether pumping water from a cooling tower basin, pit or sump, you need the water to be free of trash and debris that could block water flow and damage the pump or clog water-distribution equipment. The Yardney Pump Suction Screen is designed to filter these larger contaminants on the intake piping to allow other equipment such as pumps or primary filtration units to run smoothly without clogging. Our self-cleaning screen is designed to continuously remove trash and debris from water sources saving you time, fuel and maintenance costs. Pump suction screens can be used for industrial centrifugal or turbine pump applications, cooling tower basins and more.

Applications■■ Prevention of large foreign bodies of debris from entering pump intake piping

■■ Intake pipe filter for storm water runoff, industrial process water, incoming plant water, waste water clean-up, industrial water for plant reuse

■■ Can be used with virtually any water source to target the removal of larger debris—organic or inorganic

■■ 35–65 psi standard operating pressure


Advantages■■ Precision internal spray bars continually rotate and blast debris away from the screen

■■ No exterior moving parts that can foul and cause water blockage issues

■■ Housing utilizes a removable and replaceable stainless steel screen drum saving on repair costs

■■ Galvanized pump suction screen body

■■ Heavy gauge stainless steel 12 mesh screen for increased pump efficiency

■■ Can be installed at any angle without the operation being affected

■■ Meets many state and federal standards requiring pre-screening of pump intakes

■■ Standard with a flanged connection

■■ Improves primary filter downstream of pump by reducing the contaminant and loading concentration

■■ Made in USA

Self-Cleaning Intake

Pump Suction Screens



Made in USA

Pump Suction ScreensSpecifications

Standard assembly includes:■■ Galvanized carbon steel housing

■■ Stainless steel filter mesh

■■ Internally rotating spray bars for contaminant removal

■■ Y strainer—essential on the water jet supply line

Available options:■■ Sealed brass bearings

SPECIFICATIONS | SELF CLEANING PUMP SUCTION SCREEN | 12 Mesh

ModelFlow Rate Operating

Pressure Range

Return Spray Bar A B C D E

gpm m3/hr

CW 200 325 74 40 - 60 psi 20 gpm 11" 25" 16" 4" 1 1/2"CW 400 550 125 40 - 60 psi 20 gpm 15" 28 3/4" 16" 6" 1 1/2"CW 600 750 170 40 - 60 psi 20 gpm 16" 32 1/2" 24" 8" 1 1/2"CW 800 950 216 40 - 60 psi 20 gpm 18" 34 1/2" 24" 10" 1 1/2"CW 1000 1350 307 40 - 60 psi 28 gpm 23" 39 1/2" 24" 10" 1 1/2"CW 1400 1550 352 40 - 60 psi 28 gpm 26" 42 1/2" 24" 12" 1 1/2"CW 1700 1800 409 40 - 60 psi 28 gpm 28" 44 1/2" 26" 12" 1 1/2"CW 2000 2100 477 40 - 60 psi 36 gpm 32" 48 1/2" 26" 14" 1 1/2"CW 2400 2600 591 40 - 65 psi 36 gpm 35" 52 1/2" 30" 16" 1 1/2"CW 3000 3000 682 40 - 65 psi 44 gpm 40" 57 1/2" 30" 16" 1 1/2"CW 3500 3500 795 40 - 65 psi 44 gpm 40" 59 1/2" 36" 18" 1 1/2"CW 4000 4000 909 40 - 65 psi 44 gpm 40" 63 1/2" 42" 18" 1 1/2"



|



Yardney Water Filtration Systems utilize backwash valves patented and manufactured in-house by Yardney. All three models (1.5", 342, 454) of Yardney backwash valves are manufactured from cast iron and CNC machined to achieve the lowest pressure drop in the industry. The Yardney backwash valve is the only valve in the industry designed as standard equipment to be 100% field serviceable with basic hand tools and includes a grease fitting for valve shaft lubrication.

Field Serviceable

Backwash Valves

ApplicationsFor backwashing Yardney Media Filters and Maxi-Flush Screen Filters

Advantages■■ Heavy duty and durable

■■ Rugged and 100% field re-buildable with basic hand tools

■■ CNC machined cast iron valve body

■■ Stainless steel seal retainers

■■ Polyurethane valve seal for durability and long life

■■ Internal steel parts are 100% polyester powder coated for extended life

■■ Exterior of valve is coated with UV stabilized polyester powder coat for longer product life and greater protection from the environment

■■ 3M Scotchkote® 134 fusion bonded epoxy coating on 100% of the internal valve body and components

■■ Replaceable brass bushing with internal grease cavity and double O-ring seal protected for easy on-site maintenance without removal of the valve from the system—a feature not found in competitive valves

■■ Grease fitting for periodic maintenance and lubrication of the valve shaft—a feature not found in competitive valves

■■ Type 416 pump shaft quality stainless steel valve shaft with wrench flats for easy removal and service

■■ Available in 1.5", 3" and 4" sizes

■■ Air or water actuation

■■ Made in USA

Industrial Systems

|


Made in USA

Backwash ValvesSpecifications

FiltrationValve is closed to allow process water to enter tank for filtration of the water.

BackwashValve opens to create a reverse flow of water. This reverse flow of water hydraulically lifts the media bed of each tank purging any trapped contaminants within the media bed.



|



Synergy™ Automatic Controller

Yardney’s new SYNERGY™ Automatic Controller Features:■■ 16-station output

■■ Operates up to 2 valves per station plus a master valve

■■ Selectable input power: 110V AC, 220V AC, or 12V DC

■■ Backwash on time stamp, elapsed time or pressure differential

■■ Programmable filter-backwash frequency, duration and delay

■■ Manual start with station advance and stop

■■ Water and bug resistant enclosure

■■ Pre-dwell 0-5 minutes

■■ Alarms events displayed on digital screen display including output terminals for light and/or siren

■➤ Continuous backwash

■➤ Short circuit of solenoid

■➤ High pressure with automatic pump shutdown

■➤ Faulty panel

■➤ Faulty pressure differential switch

■■ 72-hour power backup in the event of a power outage

■■ Digital display with selection of English or Spanish

■➤ Real-time hours and minutes

■➤ Number of backwash events

■➤ Number of backwash events within a time period

■■ Wire loom block for quick and easy solenoid wire installation and removal

■■ USB port for historical data logging

■■ Made in the USA

www.yardneyfilters.com

Made in USA


© 2015 Yardney Water Management Systems, Inc. | 6666 Box Springs Blvd. | Riverside, CA 92507 IRRSP115-09-2015© 2015 Yardney Water Management Systems, Inc. | 6666 Box Springs Blvd. | Riverside, CA 92507 IND115-10-2015

|


IMA-65 Specialty Media is a revolutionary silica sand based filtration media designed for the removal of iron and manganese without the use of potassium permanganate. The unique micro porous structure of IMA-65 efficiently removes dissolved iron to as low as 0.005 ppm and manganese to 0.001 ppm. After initial activation, the IMA-65 acts as an oxidation catalyst with immediate oxidation and filtration of the insoluble precipitates. The media has been used extensively in a wide variety of applications in Japan for over 30 years. IMA-65 has been tested and certified by the Water Quality Association in accordance with NSF/ANSI 61.

Iron and Manganese Removal

IMA-65 Specialty Media

Advantages■■ Eliminates Potassium Permanganate. Operates with continuous injection of sodium hypochlorite at low residual levels (0.1 to 0.3 ppm).

■■ Wide pH range. Stable and satisfactory performance at pH 5.8 to 8.6.

■■ High Flow Rates. IMA-65 can operate at linear filtration velocities up to twice that of conventional media with a corresponding reduction in capital equipment costs.

■■ Higher Operating Temperatures. Maximum operating temperature of 113 °F (45 °C).

■■ Long Life. IMA-65 is not con-sumed in the process, providing considerable advantages over other processes or media.

■■ Regeneration Not Required. After initial activation, only sodium hypochlorite feed is required.

■■ System Compatibility. Physical properties are similar to that of competitive media, allowing conversion to IMA-65 without major hardware modifications.

■■ Arsenic Removal. IMA-65 has been shown to be effective in the removal of arsenic associated with iron-containing influent. If necessary, ferric chloride can be introduced to treat waters with low influent iron levels or to enhance removal when treating waters with high levels of arsenic.



IMA-65 Specialty MediaSpecifications

Engineering (Hydraulic) Data

SPECIFICATIONS | IMA-65 SPECIALTY MEDIA

Physical Properties Operating Conditions

Color Brown to black pH range 5.8 – 8.6Bulk density 92.0 lbs./cu. ft. Maximum water temp 113 °F (45 °C)Specific gravity 2.7 Minimum bed depth 24 inches (600 mm)Effective size 0.48 Freeboard 40% minimumUniformity coefficient <1.8 Service flow rate 2 – 12 gpm per sq. ft.Mesh size 20 – 45 Backwash flow rate 10 – 20 gpm per sq. ft.Annual attrition 1-5% Backwash expansion 15 – 50%

2.9 6.8 9.1 11.2 13.0

Service Pressure Drop

Flow Rate(US GPM per square foot of bed area)

Pres

sure

Dro

p(P

SI

per

foot

of

bed

dept

h)

3.0

2.5

2.0

1.5

1.0

0.5

0.0

■ 80 degrees F■ 60 degrees F■ 40 degrees F

0 5 10 15 20

Backwash Bed Expansion

Bac

kwas

h Bed

Exp

ansi

on(P

erce

nt o

f be

d de

pth)

Flow Rate(US GPM per square foot of bed area)

70%

60%

50%

40%

30%

20%

10%

0%

■ 80 degrees F■ 60 degrees F■ 40 degrees F

Phone: 951.656.6716 Toll-Free: 800.854.4788 Fax: 951.656.3867 [email protected] www.yardneyfilters.com


|



©2015 Yardney Water Management Systems, Inc. | 6666 Box Springs Blvd. | Riverside, CA 92507

Phone: 951.656.6716 Toll-Free: 800.854.4788



yardney industrial catalog

Documents