x-eye 6200 - s3 alliance · 2019. 12. 12. · x-eye 6200 system provides complete automated in-line...
TRANSCRIPT
X-eye 6200SMT 2D in-line AXI
Major Features:
The Ultimate Solution for Auto X-ray Inspection
Inspection Component
Automated In-line 2D X-ray Inspection
High detection of industrial demanding defect on PCBA
Intuitive - Flexible Configuration, Easy to Program
Fast Throughput
BGA
QFN / TR
QFP
Chip Component
Inspection ItemOpen / Short
Insufficient / Excessive Solder
Void
Component Presence and Position
ApplicationHidden Solder Joint
Shielded Component
Rev. 2012-08-20
Cost Effective
X-eye 6200 System provides complete automated in-line X-ray
inspection of solder joints and other hidden component on PCB
assemblies. With tray-to-tray conveyor configuration and
processing capabilities to find defects, X-eye 6200 System’s
AXI technologies successfully deliver a variety of solutions
meeting industrial demanding challenges.
X-eye 6200 System is intuitive to use, fast to create the
inspection routine and built to high quality standards. With
simple program creation and tuning, X-eye 6200 System
increases the productivity of your inspection programming staff.
X-eye 6200 System’s AXI solution offer a new level of In-line
X-ray inspection performance to deliver the highest throughput
and superior detection with a minimal of false calls.
X-eye 6200 SystemAutomated 2D in-line X-ray Inspection
Major Specifications
Hardware
Inspection Capabilities
General
Dimensions Software
X-ray Tube
Throughput
Power Requirement
Dimension / Weight
South Korea - Headquarter415 Factory World, 332-2 Woncheon-DongSuwon, South Korea 443-758
Tel: +82-31-215-7341Fax: +82-31-215-7343Email: [email protected]/eng
China - Shanghai OfficeRoom 101, Building 5, No. 100 Zixiu Road,Minhang District, Shanghai, China 201103
Specifications in this catalog are subject to change without notice as SEC CO., Ltd. continues to develop the latest technologies and products
Tel: +86-21-6083-0707Fax: +86-21-6083-0706Email: [email protected]/CHI
X-ray Safety
Inspection Size
Inspection Component
Inspection Item
100 kV Micro-focus In-line X-ray Tube (Sealed Type)
4/6” Digital Image Intensifier with Camera Integrated
900 ± 20 mm / 950 ± 20 mm
Max. 1200 sq. mm / sec
Max. 330mm x 250mm / Thickness: Max. 3.0mm
BGA, QFN, QFP, TR, Chip Components
Open, Short, Insufficient / Excessive Solder, Void, Component Presence and Position
220VAC Single Phase, 50/60Hz
1,000 (W) x 1,400 (D) x 1,500 (H) mm / 1,800 Kg
Leakage Dose less than 1uSv/hr
User Interface
Automated X-ray Inspection
(Performance vary depending on the inspected component and PCB.)
X-ray Detector
PCB Transfer Height