imagerunner advance 6200 series service...
TRANSCRIPT
SSeerrvviiccee GGuuiiddee
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page i
Published byCanon U.S.A., Inc.One Canon PlazaLake Success, NY 11042-11981-800-OK-CANONE-Mail: [email protected]
Canon U.S.A. Homepage: http://www.usa.canon.comCanon U.S.A. Internet e-Support Center Web site: http://www.support.cusa.canon.comCanon U.S.A. ISG Central Web site: http://isgcentral.cusa.canon.comCanon Network Access (CNA) Web site: http://www.cna.cusa.canon.com
Distributed in the United States by Canon U.S.A., Inc.
IMPORTANT
THIS SERVICE GUIDE INCLUDES THE INFORMATION RELATING TO THE imageRUNNER ADVANCE6275/6265/6255.
SPECIFICATIONS AND OTHER INFORMATION CONTAINED HEREIN MAY VARY SLIGHTLY FROMACTUAL DEVICE VALUES OR THOSE FOUND IN ADVERTISING AND OTHER PRINTED MATTER.
USE OF THIS SERVICE GUIDE SHOULD BE STRICTLY SUPERVISED TO AVOID DISCLOSURE OFCONFIDENTIAL INFORMATION.
ALL PRICES LISTED ARE SUBJECT TO CHANGE WITHOUT NOTICE.
PART NUMBERS LISTED MAY BE CHANGED WITHOUT NOTICE TO REFLECT ENGINEERINGREVISIONS.
REVISION HISTORY
Revision Date Sections Details
November 2012 AllRelease of the imageRUNNER ADVANCE 6200 SeriesService Guide.
December 2013 VIII, X Suggested End-user customer service offerings Updates Updates to include Engineering Services and Solutions
Division.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page ii
COPYRIGHTS AND TRADEMARKS
This Service Guide is the property of Canon U.S.A., Inc.
© Canon U.S.A., Inc. 2012. All rights reserved.
Canon, imageRUNNER, and Always Ask for Canon Genuine Toner, Parts & Supplies are registeredtrademarks of Canon Inc. imageWARE is a registered trademark of Canon U.S.A., Inc.
All other company names and product names may be trademarks or registered trademarks of theirrespective owners, and are hereby acknowledged.
LEGAL NOTICES
The information contained in this Service Guide constitutes confidential information of CanonU.S.A., Inc.
Pursuant to the authorized Service Agreement with Canon U.S.A., Inc., this Service Guide is solely forreference purposes and may be used only by an authorized Service Provider of Canon U.S.A., Inc. No partof this Service Guide may be reproduced or transmitted in any form by any means, electronic or mechanical,for any purpose without the prior written consent of Canon U.S.A., Inc., except as expressly permitted herein.
Pursuant to the authorized Service Agreement with Canon U.S.A., Inc., the Service Provider agrees toindemnify Canon U.S.A., Inc. and to hold it harmless from and against any and all claims arising out ofService Provider’s possession, use, or misuse of this Service Guide.
As an authorized Canon dealership for the imageRUNNER ADVANCE 6200 Series, you agree that theimageRUNNER ADVANCE 6200 Series and its related hardware/software accessories will not be exportedfrom the United States except in strict accordance with the Export Administration Regulations of the U.S.Department of Commerce and other U.S. laws and regulations controlling exports from the United States.
Canon U.S.A., Inc. from time to time updates this online Service Guide and may modify the informationand/or specifications contained in it at any time without notice. Additionally, all prices and availability dateslisted herein are subject to change without notice. The latest version is available online at the ISG Centraland e-Support Web sites noted above. Please make certain that you are using the latest version. Specimensof Web pages included herein are for illustration purposes only.
DISCLAIMER
NEITHER CANON NOR ITS SUPPLIERS NOR ANY AUTHORIZED SERVICE PROVIDER SHALL BELIABLE FOR PERSONAL INJURY OR PROPERTY DAMAGE (UNLESS CAUSED SOLELY ANDDIRECTLY BY THE NEGLIGENCE OF CANON OR ANY AUTHORIZED SERVICE PROVIDER), LOSS OFREVENUE OR PROFIT, FAILURE TO REALIZE SAVINGS OR OTHER BENEFITS, EXPENDITURES FORSUBSTITUTE EQUIPMENT OR SERVICES, LOSS OR CORRUPTION OF DATA, INCLUDING, WITHOUTLIMITATION, DATA STORED ON THE PRODUCT’S HARD DISK DRIVE, STORAGE CHARGES OROTHER SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED BY THE USE, MISUSE ORINABILITY TO USE THE PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIMIS BASED AND EVEN IF CANON OR ITS SUPPLIERS OR ANY AUTHORIZED SERVICE PROVIDERHAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF ANYKIND AGAINST CANON OR ITS SUPPLIERS OR ANY AUTHORIZED SERVICE PROVIDER BEGREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT CAUSING THE ALLEGEDDAMAGE. WITHOUT LIMITING THE FOREGOING, THE PURCHASER ASSUMES ALL RISKS ANDLIABILITY FOR LOSS, DAMAGE OR INJURY TO PERSONS AND THE PROPERTY OF THEPURCHASER OR OTHERS ARISING OUT OF THE POSSESSION, USE, MISUSE, OR INABILITY TOUSE THE PRODUCT NOT CAUSED SOLELY AND DIRECTLY BY THE NEGLIGENCE OF CANON ORANY AUTHORIZED SERVICE PROVIDER.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page iii
Contents
I. Product Overview and Configuration---------------------------------------------------------------- 1A. Overview ------------------------------------------------------------------------------------------------------------- 1
B. New Features ------------------------------------------------------------------------------------------------------- 2
C. Configuration ------------------------------------------------------------------------------------------------------- 6
D. Main Unit Box Contents ----------------------------------------------------------------------------------------11
II. Hardware Accessory Options------------------------------------------------------------------------ 12A. Duplex Color Image Reader Unit-G1 -----------------------------------------------------------------------12
B. Paper Deck Unit-A1 ----------------------------------------------------------------------------------------------12
C. Paper Deck Unit-D1 ----------------------------------------------------------------------------------------------12
D. Tab Feeding Attachment Kit-B1 -----------------------------------------------------------------------------12
E. Copy Card Reader-F1 -------------------------------------------------------------------------------------------13
F. Staple Finisher-P1------------------------------------------------------------------------------------------------13
G. Booklet Finisher-P1----------------------------------------------------------------------------------------------13
H. External 2/3 Hole Puncher-A1 --------------------------------------------------------------------------------14
I. Copy Tray-Q1 ------------------------------------------------------------------------------------------------------14
J. 2.5 inch/160 GB HDD-J1 ----------------------------------------------------------------------------------------14
K. 2.5 inch/1 TB HDD-K1 -------------------------------------------------------------------------------------------14
III. System Features and Options ----------------------------------------------------------------------- 15A. Copy and Print Options ----------------------------------------------------------------------------------------15
1. Secure Watermark-B1---------------------------------------------------------------------------------------152. PCL Printer Kit-AV1 ------------------------------------------------------------------------------------------153. PS Printer Kit-AV1--------------------------------------------------------------------------------------------154. Direct Printer Kit (for PDF/XPS)-H1 ----------------------------------------------------------------------155. imagePASS-U2 -----------------------------------------------------------------------------------------------156. PCL International Font Set-A1-----------------------------------------------------------------------------167. Barcode Printing Kit-D1 -------------------------------------------------------------------------------------168. Additional Memory Type D (512 MB) --------------------------------------------------------------------16
B. Universal Send / Fax Features and Options -------------------------------------------------------------161. Universal Send Advanced Feature Set-F1 -------------------------------------------------------------162. Universal Send Security Feature Set-D1 ---------------------------------------------------------------163. Universal Send Digital User Signature Kit-C1 ---------------------------------------------------------164. Super G3 FAX Board-AL1 ----------------------------------------------------------------------------------165. Super G3 2nd Line Fax Board-AL1-----------------------------------------------------------------------166. Super G3 3rd/4th Line Fax Board-AL1 ------------------------------------------------------------------177. Remote Fax Kit-A1 -------------------------------------------------------------------------------------------178. Adobe LiveCycle Rights Management ES Server Integration -------------------------------------17
C. Document Storage Capabilities------------------------------------------------------------------------------181. Mail Box ---------------------------------------------------------------------------------------------------------182. Advanced Box -------------------------------------------------------------------------------------------------183. Network Storage ----------------------------------------------------------------------------------------------194. Memory Media Storage -------------------------------------------------------------------------------------19
D. Connectivity Options--------------------------------------------------------------------------------------------201. Web Access Software-H1 ----------------------------------------------------------------------------------202. USB Device Port-A2 -----------------------------------------------------------------------------------------203. Multimedia Reader/Writer-A2 ------------------------------------------------------------------------------204. Remote Operator's Software Kit-B1----------------------------------------------------------------------20
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page iv
E. Security Features and Options-------------------------------------------------------------------------------201. Device Management and Security------------------------------------------------------------------------202. Network Security----------------------------------------------------------------------------------------------213. Data Management and Security --------------------------------------------------------------------------224. Document Management and Security -------------------------------------------------------------------265. Audit Log--------------------------------------------------------------------------------------------------------276. iR-ADV Security Kit-F1 for IEEE 2600.1 Common Criteria Certification ------------------------27
IV. Software Solutions -------------------------------------------------------------------------------------- 29A. Document Management and Binding ----------------------------------------------------------------------29
1. imageRUNNER ADVANCE Desktop---------------------------------------------------------------------292. imageRUNNER ADVANCE Quick Printing Tool ------------------------------------------------------293. imageWARE Document Server ---------------------------------------------------------------------------294. imageWARE Scan Manager DS --------------------------------------------------------------------------305. eCopy PDF Pro Office---------------------------------------------------------------------------------------30
B. Scan Management------------------------------------------------------------------------------------------------301. Workflow Composer and Connectors--------------------------------------------------------------------302. Authorized Send ----------------------------------------------------------------------------------------------303. uniFLOW (Scanning)-----------------------------------------------------------------------------------------314. Cloud Portal for imageRUNNER ADVANCE-----------------------------------------------------------315. eCopy ShareScan --------------------------------------------------------------------------------------------31
C. Print/Output Management -------------------------------------------------------------------------------------311. Canon Mobile Printing ---------------------------------------------------------------------------------------312. Direct Print and Scan for Mobile --------------------------------------------------------------------------323. uniFLOW--------------------------------------------------------------------------------------------------------324. Advanced Anywhere Print (AA-PRINT) -----------------------------------------------------------------325. Universal Login Manager -----------------------------------------------------------------------------------326. EFI PrintMe-----------------------------------------------------------------------------------------------------33
D. Device Security and Management --------------------------------------------------------------------------341. Advanced Authentication – Proximity Card (AA-PROX) --------------------------------------------342. imageRUNNER ADVANCE Tracker ---------------------------------------------------------------------343. imageWARE Enterprise Management Console and Plug-ins--------------------------------------344. uniFLOW Device Security & Management -------------------------------------------------------------355. uniFLOW Serverless Secure Print------------------------------------------------------------------------356. MEAP Web -----------------------------------------------------------------------------------------------------35
V. Dealer Sales/Service Authorization ---------------------------------------------------------------- 36
VI. Educational Training------------------------------------------------------------------------------------ 36A. Training Program Overview-----------------------------------------------------------------------------------36
B. Certification --------------------------------------------------------------------------------------------------------37
C. Who Should Attend ----------------------------------------------------------------------------------------------37
D. Learning Path for Service Technicians not certified on the imageRUNNER ADVANCE8000/6000 Series ------------------------------------------------------------------------------------------------------37
1. Online Courses – Technician Training-------------------------------------------------------------------372. Classroom – Technician Training-------------------------------------------------------------------------383. Prerequisites ---------------------------------------------------------------------------------------------------38
E. Learning Path for Service Technicians certified on the imageRUNNER ADVANCE 8000/6000Series---------------------------------------------------------------------------------------------------------------------38
F. Training Facilities ------------------------------------------------------------------------------------------------391. Classroom ------------------------------------------------------------------------------------------------------392. e-Learning ------------------------------------------------------------------------------------------------------39
G. Course Equipment -----------------------------------------------------------------------------------------------39
H. Service Materials -------------------------------------------------------------------------------------------------39
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page v
VII. Servicing Notes------------------------------------------------------------------------------------------- 40A. Power and Plug Requirements-------------------------------------------------------------------------------40
B. Hardware Configuration Chart -------------------------------------------------------------------------------41
C. Installation Weight & Dimensions---------------------------------------------------------------------------42
D. Installation Space Requirements----------------------------------------------------------------------------44
E. Estimated Installation Times ---------------------------------------------------------------------------------46
F. Recommended System Engineer Requirements-------------------------------------------------------47
G. Serviceability-------------------------------------------------------------------------------------------------------48
H. Remote Serviceability-------------------------------------------------------------------------------------------491. imageWARE Remote ----------------------------------------------------------------------------------------492. Content Delivery System------------------------------------------------------------------------------------50
I. Device Configuration Management-------------------------------------------------------------------------51
J. Firmware Upgrades Using the Service Support Tool-------------------------------------------------521. Upgrade Functions: ------------------------------------------------------------------------------------------522. Backup / Restore RAM Data -------------------------------------------------------------------------------523. Requirements for Using the Service Support Tool----------------------------------------------------52
K. LMS (License Management System) -----------------------------------------------------------------------54
L. Content Delivery System Web Site -------------------------------------------------------------------------55
M. Hard Disk Drive Handling --------------------------------------------------------------------------------------56
N. Special Tools, Solvents and Oils ----------------------------------------------------------------------------57
O. Consumables ------------------------------------------------------------------------------------------------------59
P. Consumable Parts------------------------------------------------------------------------------------------------60
Q. Periodic Replacement Parts ----------------------------------------------------------------------------------63
R. Periodic Maintenance -------------------------------------------------------------------------------------------64
S. Soft Counter--------------------------------------------------------------------------------------------------------68
T. MEAP Counter -----------------------------------------------------------------------------------------------------68
VIII. Suggested End-User Customer Service Offerings -------------------------------------------- 69A. Monthly Copy/Print Volume-----------------------------------------------------------------------------------69
B. Limited Warranty Support -------------------------------------------------------------------------------------701. End-User Limited Warranty Conditions------------------------------------------------------------------702. GPR-37/38 Drum Unit Limited Warranty ----------------------------------------------------------------703. Flat-Rate Program--------------------------------------------------------------------------------------------704. Warranty Parts for Repair-----------------------------------------------------------------------------------715. e-Tag-------------------------------------------------------------------------------------------------------------736. Online Limited Warranty Credit Inquiry ------------------------------------------------------------------75
IX. Product Technical Support Offerings ------------------------------------------------------------- 78A. Dealer Support Requirements--------------------------------------------------------------------------------78
B. Canon USA Support Offerings -------------------------------------------------------------------------------791. Canon USA Technical Support Center ------------------------------------------------------------------792. NAVI -------------------------------------------------------------------------------------------------------------813. Internet Support -----------------------------------------------------------------------------------------------84
X. Appendix---------------------------------------------------------------------------------------------------- 87A. Registered Paper Type and Weight-------------------------------------------------------------------------87
B. Specifications------------------------------------------------------------------------------------------------------88
C. Warranty-------------------------------------------------------------------------------------------------------------991. Main Unit Limited Warranty --------------------------------------------------------------------------------992. GPR-37/38 Drum Unit Limited Warranty -------------------------------------------------------------- 100
D. List of Tables----------------------------------------------------------------------------------------------------- 101
E. List of Figures --------------------------------------------------------------------------------------------------- 102
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 1
I. Product Overview and Configuration
A. Overview
The Canon imageRUNNER ADVANCE 6200 Series consists of theimageRUNNER ADVANCE 6275/6265/6255. These models are the replacementmodels for the imageRUNNER ADVANCE 6075/6065/6055 models.
These models bring the following capabilities to users in a mid to high-volumeoffice or CRD environment:
The imageRUNNER ADVANCE 6275 is a Segment 5 device that prints andcopies B&W (Black and White) (Letter sized sheets) at speeds of up to 75-ppm (pages per minute). The imageRUNNER ADVANCE 6265 andimageRUNNER ADVANCE 6255 are Segment 4 devices that print and copyB&W (Letter sized sheets) at speeds of up to 65-ppm and 55-ppmrespectively.
A standard Single-Pass Duplexing Automatic Document Feeder (ADF) witha capacity of up to 300-sheets (20 lb bond (80 g/m2)).
Standard 160 GB hard disk drive (HDD) that is expandable to a 1 TB HDDand 1.5 GB of RAM (Random Access Memory) expandable to 2 GB.
A maximum paper size of 11” x 17” is supported. The standard papersources (two (2) paper drawers, two (2) paper cassettes and one multi-purpose tray) can hold a maximum of 4,200 sheets of paper. Adding theoptional Paper Deck Unit-A1 or Paper Deck Unit-D1, the device can hold amaximum of 7,700 sheets.
Standard USB memory support. Two USB ports (one is on the right side ofthe control panel, and another on the back right of the main unit) areavailable for scanning to or printing from USB memory media. The optionalMultimedia Reader/Writer is installed enables reading SD memory cards,SDHC memory cards, CF (Compact Flash) cards, Microdrives, MemoryStick, Memory Stick PRO, and other types of memory media.
Embedded 8.4” Super VGA high-resolution TFT screen. The optionalUpright User Interface features a 10.4” Super VGA high-resolution TFTscreen with Tilt and Swivel capability and a flexible positions arm to enablethe UI to move to a desired viewing position.
A-Si Drum improved print quality and a longer life. Standard Color Send and UFR II printing. All imageRUNNER ADVANCE 6200 Series machines are ENERGY STAR
qualified.1
The ability to activate optional software products via the LMS (LicenseManagement System). Refer to the LMS section herein for further details.
1 If any options are installed, the device may no longer be ENERGY STAR qualified.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 2
B. New Features
The imageRUNNER ADVANCE 6200 Series devices offer the followingimprovements and new features:
User-Centric Design and Performance Improvements
Customizable user interface Improvements to keyboard use and login customization The new “Quick Startup Mode”. allows for a shorter startup time of less
than 7 seconds from power-OFF, while maintaining standby powerconsumption of less than 0.45 W
A high-speed CPU allows for improved PDL performance compared tothe predecessor models
Workflow Enhancements
The new Desktop Quick Printing Tool is a method to drag and dropdocuments to quickly print, fax and create PDFs using standard andcustomized document templates
The imageRUNNER ADVANCE 6200 Series feature as standard Scan toOffice Open XML (to .pptx file format only) and Searchable PDF (OCR)
New software solutions integrate the imageRUNNER ADVANCE 6200Series devices directly into mobile and cloud workflows
Security Enhancements
The HDD Erase function is now available as a standard feature The HDD Lock Function is a new standard feature that protects the data
stored in the HDD from being accessed by a PC after removal from thedevice
The IPsec feature is now available as a standard feature
Improved Device Management and Serviceability
The Device Firmware Update Plug-in with Local Content DeliverySystem provides local firmware management, version management andbatch distribution of firmware on a local Intranet
The Migration tools USB memory media and Remote User Interface(Remote UI) greatly simplifies fleet replacement and migration
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 3
Table 1 – imageRUNNER ADVANCE 6200 Series Comparison
FeatureimageRUNNER ADVANCE
6275 6265 6255
Copy / Print Speed (ppm) (LTR) Up to 75 Up to 65 Up to 55
Optimum Copy Volume (copies/prints)(Approximately)
30,000-150,000 30,000-110,000 30,000-70,000
Scan Speed(LTR, 300 dpi)
SimplexB&W 120 ipm (images per minute)
Color 85 ipm
DuplexB&W 200 ipm
Color 100 ipm
Scan Speed(LTR, 600 dpi)
2
SimplexB&W 120 ipm
Color 51 ipm
DuplexB&W 120 ipm
Color 51 ipm
ResolutionScan / Copy Up to 600 x 600 dpi
Print Up to 1,200 x 1,200 dpi
ADF (Automatic Document Feeder) Single-Pass Duplexing ADF (Standard)
ADF Capacity (20 lb bond (80 g/m²)) Up to 300 sheets
Maximum PaperSize
Paper Drawers 1 and 2 Letter (only)
Cassettes 1 and 2 11” x 17”
Paper Deck Unit-A13
Letter (only)
Paper Deck Unit-D13
11” x 17”
Multi-Purpose Tray 11” x 17”
Paper Weight
Paper Drawers,Paper Cassettes andPaper Decks
14 lb bond to 80 lb cover (52 to 220 g/m²)
Multi-Purpose Tray 14 lb bond to 140 lb index (52 to 256 g/m²)
Paper Capacity
(20 lb bond (80g/m
2)
Standard
Two Paper Drawers: Up to 1,500 sheets each
Two Paper Cassettes: Up to 550 sheets each
Multi-Purpose Tray: Up to 100 sheets
OptionalPaper Deck Unit-A1 or Paper Deck Unit-D1
Up to 3,500 sheet paper deck
Maximum Up to 7,700 sheets
Multiple Copies 1 to 9,999 sheets
Printer MemoryStandard 1.5 GB
Maximum 2 GB
Hard Disk DriveStandard 160 GB
Maximum 1TB
Warm Up Time(at a room temp.of 68°F (20°C))
From Power On Approximately 30 seconds
From Sleep Mode Approximately 30 seconds
From Quick StartupMode
Approximately 7 seconds4
(Approximately 10 seconds when equipped
with the 1 TB HDD)
FCOT (First Copy Output Time)Approximately3.1 seconds
Approximately 3.3 seconds
2 Requires the optional Additional Memory Type-D (512 MB).3 Paper Deck Unit A1 and Paper Deck Unit-D1 optional.4 If "Quick Startup Settings for Main Power" is set to On, it takes 7 seconds until the key operation on the touch panel display is
available after turning ON the main power.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 4
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 5
Table 1 – imageRUNNER ADVANCE 6200 Series Comparison Continued
FeatureimageRUNNER ADVANCE
6275 6265 6255
Toner Yield (LTR) Approximately 56,000 images
Drum Yield (LTR) Approximately 6,000,000
Copy Standard
Store
Mail Box Standard
Advanced Box Standard
USB Media Support Standard (Scan)5
imagePASS(Embedded)
Optional: imagePASS-U26
UFR II Standard
PCL
Optional:
imagePASS-U26
PCL Printer Kit-AV17
Direct Print
Standard (JPEG, TIFF)
Optional:
PDF/XPS Direct Printer Kit-H1, (PDF, XPS)
PS Printer Kit-AV17, (PDF only))
PostScript
Optional:
imagePASS-U26
PS Printer Kit-AV17
Send
Universal Send Standard Color
PDF High Compression Standard
Searchable PDF Standard
OOXML8
(.pptx only) Standard
PDF Advanced FeatureSet
Optional9
PDF Security FeatureSet
Optional10
PDF Digital UserSignature
Optional
Fax
Single Line Optional w/Super G3 FAX Board-AL1
2nd
Line Optional w/Super G3 2nd
Line Fax Board-AL1
3rd
/4th
Line Optional w/Super G3 3rd
/4th
Line Fax Board-AL1
Remote Fax Optional w/Remote Fax Kit-A1
NetworkStandard Ethernet 1000Base-T/100Base-TX/10Base-T
Wireless LAN (IEEE 802.1x via 3rd party adapter)
Remote UI Standard
MEAP Capability Standard
AMS (Access Management System) Standard
5 The optional Multimedia Reader/Writer adds support for SD Card, Compact Flash, Memory Stick, and Micro Drive.6 Cannot be installed with PCL Printer Kit-AV1 and PS Printer Kit-AV17 Cannot be installed with imagePASS-U2 controller.8 The file format .docx is not supported.9 Includes Trace & Smooth PDF, and PDF with Adobe Reader Extensions format support.10 Includes Digital Device Signature (PDF/XPS) and Encrypted PDF modes.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 6
C. Configuration
Note: All configurations shown are for reference purposes only, and are subjectto change without notice. Please refer to the Dealer Price List on the ISG CentralWeb site for the most up-to-date item numbers.
Table 2 – Configuration
Item Part Number11
imageRUNNER ADVANCE 6275(with the optional Saddle Finisher, External 2/3 Hole Puncher and Paper Deck Unit-D1)
imageRUNNER ADVANCE 6275 Base Model12 13
5987B009AA
imageRUNNER ADVANCE 6265 Base Model12 13
5988B010AA
imageRUNNER ADVANCE 6255 Base Model12 13
5989B009AA
imageRUNNER ADVANCE 6275 Printer Model13 14
5987B010AA
imageRUNNER ADVANCE 6265 Printer Model13 14
5988B011AA
imageRUNNER ADVANCE 6255 Printer Model13 14
5989B010AA
11 Part numbers are subject to change without notice.12 Ships standard with 2 x 1,500-Sheet Paper Drawers, 2 x 550-sheet Paper Cassettes, Tab Feeding Attachment Kit, UFRII Printing,
Color Universal Send with PDF High Compression, Searchable PDF/XPS, OOXML (Scan to PPT), Access Management System,HDD Data Erase, IP Sec, Single Pass Duplexing Automatic Document Feeder, Color Image Reader, USB 2.0 high speedconnectivity, Ethernet 1000Base-T/100Base-TX/10Base-T, Color Network ScanGear and Drum Units. Color Image Reader withSingle Pass Duplexing Automatic Document Feeder is shipped separately.
13 Requires Copy Tray-Q1, Staple Finisher-P1 or Booklet Finisher-P1.14 Ships standard with 2 x 1,500-Sheet Paper Drawers, 2 x 550-sheet Paper Cassettes, UFRII Printing, Access Management System,
HDD Data Erase, IP Sec, Printer Cover, Ethernet 1000Base-T/100Base-TX/10Base-T, USB 2.0 high speed connectivity, and DrumUnit. Printer Cover is shipped separately.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 7
Table 3 – Hardware Accessories
Hardware Accessories
Item Part Number11
Paper Deck Unit-A115 3691B002BA
Paper Deck Unit-D115 3902B002BA
Staple Finisher-P116 6009B001AA
Booklet Finisher-P116 6010B001AA
External 2/3 Hole Puncher-A117 3705B002AA
Document Insertion Unit-L117, 18
3896B002AA
Document Insertion/Folding Unit-H117,18
3897B002AA
Copy Tray-Q116 3899B001AA
Tab Feeding Attachment Kit-B119
6793A004AA
Utility Tray-A2 3723B002AA
Upright Control Panel Set-E1 5796B015AA
USB Key Board (Cherry)20
1266V426
Copy Card Reader Attachment Kit-A2 3730B002AA
Copy Card Reader-F121
4784B001AA
Canon Card Set-A1 (1-30) 4781B001AA
Canon Card Set-A2 (31-100) 4781B002AA
Canon Card Set-A3 (101-200) 4781B003AA
Canon Card Set-A4 (201-300) 4781B004AA
Canon Card Set-A5 (301-500) 4781B005AA
Canon Card Set-A6 (501-1000) 4781B006AA
Braille Label Kit-F1 7518A004AA
ADF Access Handle-A1 1095B001AA
Copy Control Interface Kit-A122
3726B001AA
Convenience Stapler-B1 1727V838
Universal Keyboard Stand-A1 2212V477
Card Reader Assembly for Universal Keyboard Stand 2212V47811 Part numbers are subject to change without notice.
15 Paper Deck Unit-A1, Paper Deck Unit-D1 cannot be installed at the same time.16 Staple Finisher-P1, Booklet Finisher-P1 or Copy Tray-Q1 cannot be installed at the same time.17 Requires the Staple Finisher-P1 or Booklet Finisher-P118 Document Insertion Unit-L1 and Document Insertion/Folding Unit-H1 cannot be installed at the same time.19 Additional Tab Feeding Attachment for cassettes 3 or 4.20 When installing the USB Keyboard, it is recommended to install the Universal Keyboard Stand-A1 or the Utility Tray-A2 (unless the
Upright Control Panel-E1 is used).21 Requires the Copy Card Reader Attachment Kit-A2.22 Cannot be installed if Card Reader-F1 is installed.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 8
Table 4 – System Accessories
System Accessories
ItemBox Part
Number11 eLAN Number
23
PCL Printer Kit-AV17 6001B001AA 6001B005AA
PCL International Font Set-A124
4821B001AA 4821B003AA
PS Printer Kit-AV17 6002B002AA 6002B006AA
Direct Print Kit (for PDF/XPS)-H1 3674B002AA 3674B004AA
Encrypted Secure Print Software-D1 1337B006AB 1337B011AA
Barcode Printing Kit-D124
3999B001AA 3999B004AA
Web Access Software-H125
2738B006AA 2738B007AA
Universal Send Advanced Feature Set-F126
3405B015AA 3405B016AA
Universal Send Security Feature Set-D126
3406B002AA 3406B006AA
Universal Send Digital User Signature Kit-C127
1326B010AA 1326B013AA
Super G3 FAX Board-AL1 5992B002AA
Super G3 2nd Line Fax Board-AL128
5993B002AA
Super G3 3rd/4th Line Fax Board-AL129
5994B001AA
Remote FAX Kit-A130
3679B005AA
Secure Watermark-B1 1082B010AA
USB Device Port-A2 3738B002AA
Multimedia Reader/Writer-A231
3721B002AA
Additional Memory Type D (512 MB)32
5595B001AA
Document Scan Lock Kit-B1 3840B007AA
HDD Data Encryption and Mirroring Kit-C533 5998B002AA
HDD Data Erase Scheduler 4164BJ92AA
Removable HDD Kit-AG1 5997B001AA
2.5 inch/160 GB HDD-J134 5995B001AA
2.5 inch/1 TB HDD-K1 5996B001AA
11 Part numbers are subject to change without notice.
23 The eLAN (Electronic License Access Number) is delivered via the CNA (Canon Network Access) Web site.24 Requires PCL Printer Kit-AV1.25 Requires the PS Printer Kit-AV1 or Direct Print Kit (for PDF/XPS)-H1 when printing PDF files.26 Contains multiple options. Current (tangible) item requires multiple LANs to generate multiple license keys for activation. New
eLAN item (intangible) utilizes single eLAN to generate multiple license keys or files for activation..27 SSO-H settings are required.28 Requires Super G3 FAX Board-AL1.29 Requires Super G3 FAX Board-AL1 and Super G3 2nd Line Fax Board-AL1.30 Cannot be installed with Super G3 FAX Board-AL1.31 Requires the optional USB Device Port-A2.32 Required for 200x400 dpi, 400 x 400 dpi, 600 x 600 dpi color/grayscale scanning.33 HDD Mirroring feature requires two hard disk drives, either one additional 2.5inch/160GB HDD-J1 with the standard 160 GB HDD
or two optional 2.5 inch/1TB HDD-K1 (one replacing the standard 160GB HDD).34 HDD for Mirroring functionality only, cannot be used to increase storage.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 9
Table 4 – System Accessories Continued
System Accessories
ItemBox Part
Number11 eLAN Number
23
Voice Guidance Kit-F235
3681B003AA
Voice Operation Kit-C235
3682B004AB
Remote Operator's Software Kit-B1 4001B004AA
iR-ADV Security Kit-F1 for IEEE 2600.1 Common CriteriaCertification Set
36 6967B004AA
Silex Wireless Bridge SX-2500CG 8034B002AA
11 Part numbers are subject to change without notice.23 The eLAN (Electronic License Access Number) is delivered via the CNA (Canon Network Access) Web site.
Table 5 – System Connectivity Accessories
System Connectivity Accessories
ItemBox Part
Number11 eLAN Number
23
imagePASS-U26
6458B001AA
SeeQuence Compose 2351B003AA
SeeQuence Impose 6596A035AA
SeeQuence Suite37
6596A037AA
Removable HDD Kit-B4 0134B006AA
Integrated Interface & Stand-B138
1694V354
6 Cannot be installed with PCL Printer Kit-AV1 and PS Printer Kit-AV17 Cannot be installed with imagePASS-U2 controller.11 Part numbers are subject to change without notice.23 The eLAN (Electronic License Access Number) is delivered via the CNA (Canon Network Access) Web site.
Table 6 – Supplies and Consumables
Supplies and Consumables
Item Part Number11
Stamp Ink CRG-C1 1857B001AA
Staple Cartridge-J1 (for the Staple Finisher-P1 and Booklet Finisher-P1)39
6707A001AD
Staple Cartridge-D2 (for the Booklet Finisher-P1 only)40
0250A002AD
11 Part numbers are subject to change without notice.
35 Voice Guidance Kit-F2 and Voice Operation Kit-C2 cannot be installed at the same time.36 Includes iR-ADV Security Kit-F1 for IEEE 2600.1 Common Criteria Certification, HDD Data Encryption and Mirroring Kit-C5.
Specified configurations and settings need to be applied to the device in order to achieve and maintain IEEE2600.1 CC Certification.Cannot be configured with imagePASS-U2, Super G3 2nd Line Fax Board-AL1, Super G3 3rd/4th Line Fax Board-AL1, MultimediaReader/Writer-A2, Remote Fax Kit-A1, Direct Printer Kit (for PDF/XPS)-H1, Remote Operators Software Kit-B1, Web AccessSoftware-H1, some MEAP applications, some imageWARE options or Printer Model.
37 Includes one license each of SeeQuence Impose and SeeQuence Compose38 Includes a 19" LCD monitor, keyboard and mouse.39 Used for corner and double stapling only. Contains three cartridges per case and 5,000 staples per cartridge.40 Used for booklet finishing only. Contains three cartridges per case and 2,000 staples per cartridge.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 10
Table 7 – Drum and Toner
Drum and Toner
Item Part Number11
GPR-37/38 Black Drum Unit 3765B003AA
GPR-38 Black Toner 3766B003AA
11 Part numbers are subject to change without notice.
Table 8 – imageRUNNER ADVANCE Solutions
imageRUNNER ADVANCE Solutions
ItemBox Part
Number11 eLAN Number
23
imageRUNNER ADVANCE Desktop V3.0 1L with 3 yrs SoftwareMaintenance
4140B397AA
imageRUNNER ADVANCE Desktop V3.0 5L with 3 yrs SoftwareMaintenance
4140B398AA
imageRUNNER ADVANCE Desktop V3.0 20L with 3 yrsSoftware Maintenance
4140B399AA
imageRUNNER ADVANCE Desktop V3.0 10L NFR41
4140B400AA
Workflow Composer w/ MEAP Connectors V2.2 1L (1 to 4licenses)
42 4165B073AA
Workflow Composer w/ MEAP Connectors V2.2 1L (5 to 19licenses)
43 4165B074AA
Workflow Composer w/ MEAP Connectors V2.2 1L (20 or morelicenses)
44 4165B075AA
Workflow Composer w/ MEAP Connectors V2.2 1L NFR 4165B079AA
imageRUNNER ADVANCE Tracker V1.3 1L (1 to 4 licenses)42
4148B396AA
imageRUNNER ADVANCE Tracker V1.3 1L (5 to 19 licenses)43
4148B397AA
imageRUNNER ADVANCE Tracker V1.3 1L (20 or morelicenses)
44 4148B398AA
imageRUNNER ADVANCE Tracker V1.3 1L NFR 4148B407AA
MEAP Connector for SharePoint Server v1.1 (1 Device)45
4165B036AB
AA Prox V2.3 with WFC & MEAP Connectors 5105B036AA
AA Prox V2.3 with Tracker 5105B037AA
imageWARE Document Server V2.0E 1L with 3 yrs SoftwareMaintenance
46 4143B039AB
imageWARE Document Server V2.0E 1L NFR 4143B045AB
Client Access License for imageWARE Document Server V2.05CAL
4143B046AB
Client Access License for imageWARE Document Server V2.020CAL
4143B047AB
11 Part numbers are subject to change without notice.23 The eLAN (Electronic License Access Number) is delivered via the CNA (Canon Network Access) Web site.
41 This NFR License expires one (1) year from the date of registration.42 This item requires an order of one (1) units or more. No Split Purchases.43 This item requires an order of one (5) units or more. No Split Purchases.44 This item requires an order of one (20) units or more. No Split Purchases.45 Workflow Composer must be installed. MEAP Connector for SharePoint Server 2007/2010 does not have Software Maintenance.46 imageWARE Document Server Software and imageWARE Scan Manager DS Software ships standard with three years Software
Maintenance.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 11
Table 8 – imageRUNNER ADVANCE Solutions Continued
System Accessories
ItemBox Part
Number11 eLAN Number
23
Client Access License for imageWARE Document Server V2.0100CAL
4143B048AB
Client Access License for imageWARE Document Server V2.010CAL NFR
4143B049AB
imageWARE Document Server 1L 1 yr Software MaintenanceExtension
47 7494A696AA
imageWARE Document Server V1.1 1L & DT 5L 1 yr SoftwareMaintenance Extension
47 7494A766AA
imageRUNNER ADVANCE Desktop 1L 1yr MaintenanceExtension
47 7494A752AA
imageRUNNER ADVANCE Desktop 5L 1 yr SoftwareMaintenance Extension
47 7494A689AA
imageRUNNER ADVANCE Desktop 20L 1yr MaintenanceExtension
47 7494A751AA
imageWARE Scan Manager DS V1.1E 1L with 3 yrs SoftwareMaintenance
46 7494A698AB
imageWARE Scan Manager DS V1.0/1.1 EFS 1L 1 yr SoftwareMaintenance Extension
47 7494A699AA
imageWARE Scan Manager DS V1.1E 1L NFR48
7494A700AB
11 Part numbers are subject to change without notice.23 The eLAN (Electronic License Access Number) is delivered via the CNA (Canon Network Access) Web site.
D. Main Unit Box Contents
imageRUNNER ADVANCE 6200 Series Main Unit e-Manual Setup Guide Basic Operation Guide Before Using This Machine Drum Unit Warranty UFR II User Software imageWARE Enterprise Management Console (CD) AMS KIT Software / Manual (CD) Features of AMS
47 Software Maintenance Extensions can be purchased and registered up to 5 years in advance.48 Up to three (3) NFR packages per showroom location are available.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 12
II. Hardware Accessory Options
A. Duplex Color Image Reader Unit-G1
Standard on the imageRUNNER ADVANCE 6275/6265/6255 2-Sided Single Pass 300-sheet capacity Scanning speed: Up to 200 ipm (B&W) in 300 dpi
B. Paper Deck Unit-A1
Holds up to 3,500 sheets (@ 20 lb bond (80 g/m2)) Supports LTR-sized paper only Paper weight: 14 lb bond to 80 lb cover (52 to 220 g/m²) Includes roller pick up & paper feed Cannot be installed with the Paper Deck Unit-D1
C. Paper Deck Unit-D1
.
Holds up to 3,500 sheets (@ 20 lb bond (80 g/m2)) Supports 11” x 17 sized paper only Paper weight: 14 lb bond to 80 lb cover (52 to 220 g/m²) Includes roller pick up & paper feed Cannot be installed with the Paper Deck Unit-A1
D. Tab Feeding Attachment Kit-B1
Installed in the Paper Cassette 4 enables printing on tab paper from the cassette tray
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 13
E. Copy Card Reader-F1
Supports up to 200 departments or users. Performs Department ID Management automatically. Users must insert a
control card to access the machine. Requires the optional Copy Card Reader Attachment-A2.
F. Staple Finisher-P1
Contains three trays, which holds up to 4,000 sheets (250 sheets for thesample tray, 1,300 sheets for top tray, 2,450 sheets for lower tray).
Can corner or double staple up to 50 sheets of paper. Paper weight: 14 lb bond to 140 lb index (52 to 256 g/m²) Supports the optional External 2/3 Hole Puncher-A1 to provide hole punch
capabilities.
G. Booklet Finisher-P1
Contains three trays, which holds up to 4,000 sheets (250 sheets for thesample tray, 1,300 sheets for top tray, 2,450 sheets for lower tray).
Can corner or double staple up to 50 sheets of paper. Supports V-fold (1 sheet only) Paper weight: 14 lb bond to 140 lb index (52 to 256 g/m²) Supports the optional External 2/3 Hole Puncher-A1 to provide hole punch
capabilities.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 14
H. External 2/3 Hole Puncher-A1
Provides 2-hole punch for LGL, LTRR Provides 3-hole punch for 11x17, LTR Supports 14 lb bond to 140 lb index (52 g/m2 to 256 g/m2) Requires the Staple Finisher-P1 or the Booklet Finisher-P1
I. Copy Tray-Q1
Simple Tray for Basic output 250-sheet output capacity
J. 2.5 inch/160 GB HDD-J1
Required for the HDD Mirroring function when the HDD Data Encryption &Mirroring Kit is installed.
Does not increase the overall storage capacity of the machine.
K. 2.5 inch/1 TB HDD-K1
Required to replace the machine’s standard 160 GB hard disk drive toincrease the HDD capacity to 1 TB.
If the machine is configured with the optional HDD Data Encryption &Mirroring Kit, an additional 2.5 inch/1 TB HDD must be added to enable theMirroring capability of the primary drive.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 15
III. System Features and Options
A. Copy and Print Options
The functionality of the imageRUNNER ADVANCE 6200 Series can beexpanded by installing the following system related optional accessories.
1. Secure Watermark-B1
Enables the user to embed hidden text in the background of copies. Theembedded text becomes visible when copies of the document are madeon a copier.
Requires license activation via the LMS. Cannot be used with the Document Scan Lock Kit-B1.
2. PCL Printer Kit-AV1
Supports the PCL 5e/6 emulation printing solutions. Supports printing in true 1,200 x 1,200 dpi resolution with the Canon
PCL 6 Printer Driver. Requires license activation via the LMS.
3. PS Printer Kit-AV1
Supports the PostScript printing solution. Supports printing in true 1,200 x 1,200 dpi resolution. Requires license activation via the LMS.
4. Direct Printer Kit (for PDF/XPS)-H1
Enables the user to print PDF and XPS files directly from theRemote UI Memory Media and the Advanced Box.
Users can also print PDF files from memory media and the AdvancedBox.
Requires license activation via the LMS.
5. imagePASS-U2
A standalone print controller for the imageRUNNER ADVANCE 6200Series.
The imagePASS-U2 supports Adobe Genuine PostScript 3, PCL 5e, andPCL 6.
Suited for office environments where large print volumes are frequentlyprocessed, or for users who use Adobe PostScript or other PostScriptapplications.
UFR II (Ultra Fast Rendering II) is not supported. Supports Command Workstation 5, SeeQuence Suite, SeeQuence
Impose and SeeQuence Compose The imagePASS-U2 cannot be used with the Encrypted Secure Print
Software-D1.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 16
6. PCL International Font Set-A1
Provides Andalé font support for the PCL driver. Enables the user to print in four Asian languages: Japanese, Chinese,
Korean, and Taiwanese. Requires the PCL Printer Kit-AV1. Requires license activation via the LMS.
7. Barcode Printing Kit-D1
Provides the ability to print 1D and 2D barcodes on output. Requires the PCL Printer Kit-AV1. Requires license activation via the LMS
8. Additional Memory Type D (512 MB)
Expands the memory Capacity of the machine to 2 GB Required for color/grayscale scanning 200 x 400 dpi, 400 x 400 dpi and
600 x 600 dpi
B. Universal Send / Fax Features and Options
1. Universal Send Advanced Feature Set-F1
Enables the user to make Trace & Smooth PDF, and Adobe ReaderExtensions PDF files.
Requires license activation via the LMS.
2. Universal Send Security Feature Set-D1
Enables the user to encrypt PDF and Digital Device Signature PDF/XPSfiles, as well as set a password to send them safely to a file server or e-mail address.
Enables the recipient of a PDF or Digital Device Signature PDF/XPS fileto verify which device scanned the file.
Requires license activation via the LMS.
3. Universal Send Digital User Signature Kit-C1
Enables the user to add a digital user signature obtained from acertificate authority to a PDF or XPS file. This enables the recipient of aPDF or XPS file to verify which user signed it.
Requires license activation via the LMS.
4. Super G3 FAX Board-AL1
Provides a single line to send and receive fax documents. Documents that have been created in applications can also be sent
directly from a computer via a network.
5. Super G3 2nd Line Fax Board-AL1
Provides two lines to send and receive fax documents. Requires the Super G3 FAX Board-AL1.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 17
6. Super G3 3rd/4th Line Fax Board-AL1
Provides up to four lines to send and receive fax documents. Requires the Super G3 FAX Board-AL1, Super G3 2nd Line Fax Board-
AL1.
7. Remote Fax Kit-A1
The Remote Fax Kit-A1 enables an imageRUNNER ADVANCE devicewithout a Fax board installed (the client device) to utilize the Super G3Fax board installed in another imageRUNNER ADVANCE device (thefax server) to send and receive fax documents via the server.
The client imageRUNNER ADVANCE device and the fax serverimageRUNNER ADVANCE device must be on the same network.
The Remote Fax Kit-A1 requires license activation via the LMS. The Remote Fax Kit and the Super G3 FAX Board cannot be installed
together.
8. Adobe LiveCycle Rights Management ES Server Integration
Enables Administrators to set automatic document privileges and applysecurity policies by creating Policy Protected PDF files on theimageRUNNER ADVANCE Device, even after document creation, usingthe Adobe LiveCycle Rights Management ES Server.
Upon attempt by an end-user to open a protected Policy Protected PDFdocument, the Rights Management Server is contacted to check thelatest authorized users, expiration, auditing, and watermarking policiesset by the administrator.
These latest policies are then enforced by that application to ensure theinformation in that document remains secure.
IMPORTANT
To generate a PDF file linked with the Adobe LiveCycle RightsManagement ES Server, the Adobe LiveCycle Rights Management ESServer must be licensed, pre-configured by a system administrator andthe machine must be connected to the Intranet or Internet.
Encrypted PDF and PDF/A-1b documents are not compatible with AdobeLiveCycle Rights Management ES Server.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 18
C. Document Storage Capabilities
The imageRUNNER ADVANCE 6200 Series machines offer two built-in storagemethods and two external links for storing scanned documents and accessingstored files.
IMPORTANT
Canon U.S.A., Inc. is not responsible for any damages caused to user datathat is stored on the hard disk drive of the machine. It is the customer’sresponsibility to create and maintain a data backup plan. Canon U.S.A., Inc.offers several security options to enhance document handling and storagesecurity needs. See Security Features and Options on Page 20.
It is strongly recommended to back up the data stored on the hard diskdrive.
1. Mail Box
The Mail Box is a data storage area that provides the ability to store filestemporarily for on-demand printing or reprint purposes.
The Mail Box function enables users to store files that are scanned with thismachine, or data sent from a personal computer via the printer driver. Thestored files can be printed (or reprinted) anytime using the desired usersettings. When combined with the Send Function the file format of thescanned documents can be converted into another file format (PDF, JPEG,and TIFF), and sent via e-mail or fax or sent to a file server or anothermailbox. Up to 100 files in the mailbox at a time can be selected to send.The files in Mailbox can be edited. Files can be incorporated into other filesin the mailbox, duplicated, or have pages deleted. The Mailbox privacyallows password protection for each Mailbox or labeling the Mailbox forindividual users. In addition, various editing features are available, such asmerging separately stored files, duplication or deleting pages from a file.
2. Advanced Box
Advanced Box is a storage area in the machine that stores scanneddocuments and Microsoft Office files that can be used on a computer. Thereare two types of storage in the Advanced Box: the Shared Space and thePersonal Space.
Documents can be scanned with this machine, stored in the PDF, JPEG,TIFF (B&W), XPS and OOXML8 (.pptx only) file format, and can also beprinted on this machine at any time with the desired print settings.
The Advanced Box can be opened to the public as an SMB (ServerMessage Block) server or WebDAV (Distributed Authoring and Versioning)server. This enables the end-user to access the Advanced Box from acomputer, and store and share files in their native format, such as MS Word,Excel, and PowerPoint. To view and print these native format files from theAdvanced Box, the user must access them via a computer.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 19
a. Shared Folders
An open access storage space. Ideal as a shared storage space bymultiple users (for example, team, group, or department members).
Subfolders can be created.
Up to 1,000 files/folders (main and sub) can be saved in each level.
b. Personal Folders
Access is restricted to the set user only. Authentication must be set upto enable a personal folder.
Subfolders can be created.
Up to 1,000 files/folders (main and sub) can be saved in each level.
IMPORTANT
It is strongly recommended to protect the Advanced Box folders fromviruses. If the user’s computer system has an antivirus system in place, addthe Advanced Box folders to its list of folders to scan and protect.
3. Network Storage
The imageRUNNER ADVANCE 6200 Series machines are equipped with acollaboration function that enables them to be connected to otherimageRUNNER ADVANCE machines via the SMB/WebDav protocol. Whenone machine is connected to another machine, a user can select anAdvanced Box in the other machine (if it is on the network) to store files orprint a file that is stored in the other machine on this machine.
4. Memory Media Storage
USB memory media can be inserted into the USB port located on the side ofthe control panel. Memory Media storage enables end-users to scan andstore paper based information into memory media as electronic files (PDF,JPEG, TIFF, XPS and OOXML [pptx] file formats).
From the device control panel the end-user is able to prints files frommemory media at any time with the desired print settings. In addition, theend-user is able to sort folders/files, check the details of a selectedfolder/file, and preview the content of a selected file in memory media fromthe device control panel. End-users can also delete, rename and createfolders/files in memory media from the device control panel.
If the optional USB Device Port-D1 and Multimedia Reader/Writer-A2 areinstalled, an SD card, Memory Stick, Compact Flash card, and Microdrivecan be used. For more information, see USB Device Port-E1 andMultimedia Reader/Writer-A2.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 20
D. Connectivity Options
1. Web Access Software-H1
Enables the end-user to view web pages from the machine touch paneldisplay.
If PDF files are registered on the web page, the user can print them fromthe machine without using a computer. Moreover, if a Web page orspecial content is created, and then registered as a PDF file, the Webpage or special content can be shared with other users.
To print PDF files from Web pages, the optional PS Printer Kit or DirectPrint Kit (for PDF/XPS) must be installed.
2. USB Device Port-A2
Adds two USB ports to the machine so a third-party card reader or theoptional Multimedia Reader/Writer-A2 can be used for additional mediasupport.
3. Multimedia Reader/Writer-A2
Enables the end-user to use SD, Compact Flash, Memory Stick, and MicroDrive memory media for direct print and scan to store operations.
4. Remote Operator's Software Kit-B1
Enables the user to access the machine’s control panel and specifysettings or process jobs from a computer (located on the same networkas the machine) remotely.
Requires license activation via the LMS.
E. Security Features and Options
The imageRUNNER ADVANCE 6200 Series machines include a comprehensiveset of security features, such as Device Authentication, Data Security, DocumentSecurity, and Network Security.
1. Device Management and Security
a. Authentication and Usage Management
There are two ways to authenticate users at the device: via DepartmentID Management and SSO-H (Single Sign-On H).
(1) Department ID Management
Register a Department ID and password for each department,and manage the machine by limiting its use to only those whoenter the correct Department ID and password. Department IDsand passwords for up to 1,000 departments can be registered.Use Department ID Management to keep track of the copy, scan,and print totals for each department.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 21
(2) SSO-H
A user authentication system that enables the functions of themachine and MEAP applications to be used by a user after beingauthenticated once. SSO-H has two compatible userauthentication systems (Domain Authentication and Local DeviceAuthentication). Domain Authentication is linked to a domaincontroller in a Windows Active Directory environment on anetwork. Local Device Authentication uses a database inside themachine to authenticate users. Administrators can use one ofthese two systems or both at the same time.
(3) Card Reader Solutions
The imageRUNNER ADVANCE system supports cardauthentication solutions. These solutions can be combined withDepartment ID management and the SSO-H login service.
(4) Access Management System
The Access Management System (AMS), is preinstalled on theimageRUNNER ADVANCE Series devices. The AMS isadministrator-controlled and can restrict access to the device.There are two levels;
Device level login. The administrator can assign device featureaccess to end-users in conjunction with the SSO-H login serviceand the user role assigned by the administrator. (five (5) userroles are available)
Function level login. The administrator may allow or disallowaccess to a specific device function such as Copy, Print, Send,Fax, Mail Box, Web Access, Advanced Box, MEAP applications,and so on, in conjunction with the SSO-H login service.
2. Network Security
The imageRUNNER ADVANCE 6200 Series machines secure networkcommunications by using IP Address and MAC (Media Access Control)Address filters, encryption and authentication, and network port andapplication access control.
a. IPSec
IPSec (IP security) software is supported as a standard feature on theimageRUNNER ADVANCE 6200 Series to ensure information privacyand security for Internet Protocol (IP) communications over the network.It encrypts all inbound and outbound network traffic to protect againstmalicious attacks such as eavesdropping, alternation, andimpersonation.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 22
b. Filtering by Port Number
Using the Address Filter system administrators can grant or denyaccess to the imageRUNNER ADVANCE Series for specific groups orusers via Port numbers (MAC Addresses). Port Number filtering permitsor rejects incoming packets from IP addresses or ranges of IPaddresses. In addition, IP address filters to outbound connections canbe applied. For example, if functions, such as Remote Copy andUniversal Send are used, system administrators can block or restrictusers from sending files to specific IP addresses. This minimizes therisk of data being sent out of the company to systems that are nottrusted.
c. Wireless Security
The imageRUNNER ADVANCE Series supports IEEE 802.1X, which isan IEEE standard for port-based Network Access Control, primarilydesigned to enhance the security of wireless local area networks(WLANs). An access point, known as the authenticator, requests theidentity of users who request access to the access point and forwardsthe identity information to the authentication server, which authenticatesusers and returns an accept or deny message back to the access point.The access point then accepts or denies access.
d. IPv6
The imageRUNNER ADVANCE Series supports Internet ProtocolVersion 6 (IPv6), which is a network layer protocol designated as thesuccessor to IPv4 for general use on the Internet. Support for IPv6 addsextended business value to the imageRUNNER ADVANCE Series.
3. Data Management and Security
The imageRUNNER ADVANCE 6200 Series machines offer several ways toprotect and secure data. It is strongly recommended that a back up andsecurity system is in place, along with an antivirus protection system tomake sure that no data on the hard disk drives are lost, stolen, orcompromised.
There are several security methods available from Canon U.S.A., Inc. thatappropriately addresses a customer’s needs for securing data.
imageRUNNER ADVANCE Trusted Platform Module Customer Accessible HDD Initialization Function (Initialize All
Data/Settings) Optional Document Scan Lock Kit (Available in a future release) Optional Security Kits (HDD Data Erase Kit and HDD Encryption &
Mirroring Kit) Optional Removable Hard Disk Kit
CAUTION
Canon U.S.A., Inc. is not liable for any damages resulting from the loss orcorruption of data. (See the DISCLAIMER, on page ii for further details.)
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 23
a. TPM (Trusted Platform Module)
TPM is a standard security chip (tamper resistant hardware) installed inthe imageRUNNER ADVANCE 6200 Series machines. The TPMprovides a facility for the secure generation of cryptographic keys,encrypts information stored on the internal HDD, and decryptsinformation read from the internal HDD. The public keys to encryptconfidential information are securely controlled by the TPM chip, andthey can only be decrypted if the TPM releases the associateddecryption key. If the HDD is removed from the machine, it will bedifficult to retrieve data off that HDD since the encryption key for thatdata is stored in a separate location within the TPM.
CAUTION
Once the TPM setting is activated, if the end user fails to back up theTPM key, or if the end user loses the TPM key, it may result inpermanent, unrecoverable data loss, for which Canon U.S.A., Inc. is notliable. (See the DISCLAIMER, on page ii for further details.)
IMPORTANT
If the TPM setting is activated and the TPM chip fails, theconfidential information stored on the chip can only be recovered ifCanon’s service representative replaces the TPM chip and restoresthe original TPM key to the new chip. Immediately, back up the TPMkey on a USB memory stick, after the TPM setting is activated.
Only the Administrator of the machine can back up the TPM key.
For security reasons, the TPM key can only be backed up once.Store the USB memory with the backup data in a safe place.
For the backup of the TPM key, it is recommended that a USBmemory stick (supported system file: FAT32) with free space of 10MB or more is used.
The TPM seals the hardware components associated with the data,and the data cannot be accessed unless the specific TPM key isissued by the TPM chip. Therefore, setting the TPM mode to ‘On’,may affect service procedures and service costs (if not handledproperly). It is strongly recommended that the Administrator who hasaccess to the TPM key be present for all service calls to prevent theloss of data and productivity of the machine.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 24
b. HDD Password Lock Function
The HDD password lock feature further heightens the confidentiality ofhighly sensitive information stored on the hard disk. The password ismanaged by the imageRUNNER ADVANCE main unit. When the deviceis turned ON, the password is unlocked.
IMPORTANT
HDD Lock function prevents the access to the user data but the dataitself still exist on the HDD. Therefore, if the password is revealed, thedata can be exposed. HDD encryption and/or HDD erase option isrecommended for further protection.
c. HDD Data Erase
The HDD Data Erase feature is available as standard for theimageRUNNER ADVANCE Series for environments requiring additionaldata security measures. This feature will automatically overwrite anderase image data immediately after the job is competed; therefore, notrace of the data remains on the hard disk. It will perform an overwrite ofup to three (3) times with random data for maximum security protectiondepending on preferences set by the system administrator.
d. Quick Menu Log-in Screen
After end-users login to the imageRUNNER ADVANCE device, they canchoose the default Quick Menu screen (Shared or Personal) in theRestrict Quick Menu Use screen accessible from Settings/Registration(Personal is the default Quick Menu). By setting Personal as the default,access from general or unauthorized users can be restricted to ensure ahigh level of protection for personal data.
e. Initialize All Data/Settings Function
The Initialize All Data/Settings function is a standard function on allCanon devices. This setting is available in the Management Mode, towhich the system administrator must authenticate. Performing thisfunction, erases all user information on the hard disk drive of themachine (e.g., contact information, Advance Box and Mail Box data,network settings, and image data). The initialize All Data/Settingsfeature is enhanced to support up to nine (9) times data erase. Thisprocess may take more than 30 minutes to complete.
IMPORTANT
The Initialize All Data/Settings function performs the following proceduredeletes the FAT (File Allocation Table) and overwrites the target HDDdata area with “0” (zeros) one time
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 25
f. HDD Data Encryption & Mirroring Kit-C5
Includes both encryption and mirroring capabilities.
Encrypts all image data and device settings before storing them onthe HDD. Including documents stored in Mail Boxes.
The mirroring function backs up the data on the hard disk drive tothe optional HDD. (The engine HDD and the HDD used for mirroringmust be of the same storage capacity).
The HDD Data Encryption & Mirroring Kit-C5 is equipped with theCanon MFP Security Chip 1.50 which has acquired CommonCriteria Certification of Evaluation Level 3 (EAL3).
Requires the optional 2.5 inch/160 GB HDD-J1 or 2.5 inch/1 TBHDD-K1 for the mirroring capability.
CAUTION
If the HDD Data Encryption & Mirroring Kit-C5 is installed after the Mainunit is installed then the HDD must be backed up before installing theKit or a loss of data may occur. If this occurs, an E602 error code mayappear and the System Software will need to be reloaded onto theengine.
g. Document Scan Lock Kit-B1
Enables the administrator to embed an invisible code over the entiresurface of a printed document, to identify which printer printed thedocument, and enables the administrator to track who printed thedocument.
The Document Scan Lock system is tamper resistant, and ifsomeone tries to copy the document, the Document Scan Locksystem checks to see if the person has the proper permissions toreproduce it.
A password may be required to enable the reproduction of thedocument.
Enforces the policies written to track information embedded in thedocument to prevent users from performing restricted tasks, such ascopying, sending, scanning, or storing specific documents (ScanLock function), and identifies the user that output the document(Tracking function).
Requires license activation via the LMS.
Cannot be used with the optional Secure Watermark-B1.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 26
h. Removable Hard Disk Kit-AG1
Enables the hard disk of the machine to be removed while themachine is unattended or not in use.
Provides a layer a data security for government agencies andcorporate enterprises who need to ensure that the data stored onthe hard disk is physically secured when the machine is not in use.
The Removable Hard Disk Kit includes a carrying case and a key toenable easy removal and storage.
The Removable Hard Disk Kit cannot be used with the optional 2.5inch/1 TB HDD-K1.
Customers with concerns about data security may want to considerhaving a Removable Hard Disk Kit-AG1 available that only containsthe machine system software. The technician would utilize this HDDduring maintenance visits.
4. Document Management and Security
The imageRUNNER ADVANCE 6200 Series machines offer severaldocument security modes to protect printed and distributed documents.
a. Document Scan Lock & Tracking
This feature can embed Track and Lock Code (TL Code as dots or QRCode as 2D matrix codes) within copied or printed documents to restrictunauthorized copying, sending, and faxing of these documents as wellas to track the origin of these documents.
b. Policy Protected PDF
Policy protected PDF files control access and usage rights to protectsensitive and high-value information against inadvertent or maliciousdisclosure. See Adobe LiveCycle Rights Management ES ServerIntegration on page 17 for more details.
c. PDF/XPS Visible Digital Signature
The PDF/XPS Visible Signatures mode enables the user to view thedevice signature and user signature on PDF/XPS files. Visible digitalsignatures and user signatures are displayed on the first page of thePDF/XPS file to account for the origin of the document. The systemadministrator of the machine can set the Visible Signatures mode for allPDF/XPS documents or certain PDF/XPS documents created on themachine. This mode differentiates from the Digital Signature mode inthat instead of having to access digital signature information from thedocument properties from the File menu, this information is displayedprominently on the first page of the document in the background, and isprinted along with the document data, thereby deterring improperdistribution of sensitive documents.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 27
d. imageWARE Secure Audit Manager Express
imageWARE Secure Audit Manager Express is an optional solution thatcaptures and archives the contents and attributes of all jobs performedon imageRUNNER ADVANCE devices to provide an audit trail.Administrators have the ability to continuously track and archivenetwork wide activity details. This information is stored in a Window'sfolder. When integrated with uniFLOW, imageWARE Secure AuditManager Express monitors activities to track specific keywords set bythe administrator and automatically alerts the administrator via e-mailwhenever these keywords are printed, copied, scanned, faxed, or sent.
5. Audit Log
An audit log is a chronological sequence of audit records that automaticallytracks every action undertaken by end-users, developers, andadministrators for the system (Who does what and when). These recordsare used to monitor system usage to determine compliance with regulations,security standards, enterprise policies, etc., as well as to prove usageeffectiveness as audit trails.
6. iR-ADV Security Kit-F1 for IEEE 2600.1 Common Criteria Certification
The optional imageRUNNER ADVANCE Security Kit-F1 49 certifies that theimageRUNNER ADVANCE 6200 Series complies with IEEE standard2600.1 50 . IEEE 2600 is a standard to protect hardcopy devices in acommercial information-processing environment where a moderate level ofdocument security, network security, and security assurance are required.The iR ADV Security Kit-F1 enables an administrator to configure securitysettings that are required to comply with the IEEE 2600.1 standard.
Notes:
The iR ADV Security Kit-F1 includes the IEEE 2600 License Certificate,Bootable CD with certified system software, IEEE 2600 User Manual CD,Installation Manual, HDD Data Encryption & Mirroring Kit-C5. The DataErase Kit (is available as standard).
Cannot be used with the imagePASS-U2, Super G3 Fax Board (2nd and3rd/4th lines), Remote Fax Kit, Direct Print Kit, Remote OperatorsSoftware Kit, Web Access Software, Multimedia Reader/Writer, andsome MEAP applications.
IMPORTANT
The imageRUNNER ADVANCE Security Kit-F1 for IEEE 2600.1Common Criteria Certification ships device firmware that complies withIEEE 2600.1 certification when installed to the imageRUNNERADVANCE 6200 Series machines.
49 Not available at the time of the imageRUNNER ADVANCE 6200 Series product launch50 A protection profile of the evaluation assurance level "EAL3+ALC_FLR.2"
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 28
Once the imageRUNNER ADVANCE Security Kit-F1 for IEEE 2600.1Common Criteria Certification is installed, imageRUNNER ADVANCE6200 Series machines can only be upgraded with firmware versionscertified for the IEEE standard 2600.1. Upgrading to non-certifiedfirmware invalidates the IEEE standard 2600.1 certification, although themachine will continue to operate properly.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 29
IV. Software Solutions
The optional software applications are designed to enhance the end-userexperience and interaction with imageRUNNER ADVANCE machines.
A. Document Management and Binding
1. imageRUNNER ADVANCE Desktop
A client-based device dashboard application to operate documentpublishing, management, and printing from an end-user’s PC. In addition,this desktop application can be used with Canon’s new imageWAREDocument Server application in cases where customers want to sharedocuments that are managed across workgroups or departments.
2. imageRUNNER ADVANCE Quick Printing Tool
The imageRUNNER ADVANCE Quick Printing Tool can operate without theneed to launch imageRUNNER ADVANCE Desktop to enable the end-userto print, fax, convert documents to PDF files, or open documents in DesktopBinder via a drag-and-drop action. The Quick Printing Tool also enables theend-user to monitor the status of inbound and outbound print and fax jobs.
Print templates can automatically be applied to a job through the printfunction of the Quick Printing Tool, or documents can be previewed beforeprinting via the Desktop Binder option.
3. imageWARE Document Server
imageWARE Document Server is an office document sharing serverapplication. it connects multiple imageRUNNER ADVANCE Desktop utilitiesfor end-users to collaborate and share information over the network.imageWARE Document Server features document management capabilitiessuch as check-in/check-out, version control, full text search, audit trail, anduser index search. imageWARE Document Server is a Web-baseddocument management server that runs on Microsoft Windows SharePointFoundation. It is a reliable collaboration platform, making systemdeployment easy, and allowing IT administrators to easily manage andconfigure the system from a PC using a web browser.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 30
4. imageWARE Scan Manager DS
imageWARE Scan Manager DS is a document capture solution, featuringpowerful and intelligent transaction document archiving capabilities. It canbe personalized according to the scan volume and skill level of each user.
imageWARE Scan Manager DS includes an advanced indexing system thatsimplifies batch scanning and indexing. As the front-end data capturing andindexing application, imageWARE Scan Manager DS transforms paperdocuments to electronic business information and then releases it toimageWARE Document Server, for storage, management, and retrieval orto local folders if the imageWARE Document Server is not utilized.imageWARE Scan Manager DS includes an intuitive user interface, wizardtools for many functions and enables office users to perform sophisticatedindexing functions with ease.
The combined use of imageRUNNER ADVANCE Desktop, imageWAREDocument Server, and imageWARE Scan Manager DS delivers a powerfulsolution for effectively and efficiently managing both transaction documentsand every office documents.
5. eCopy PDF Pro Office
eCopy PDF Pro Office (ePPO) is a Network to Desktop Office ScanningSolution that enables end-users to create, convert, and collaborate.
With ePPO, end-users can create and share PDFs, edit PDF files andconvert PDF files into searchable, editable and fully-formatted MicrosoftOffice or Corel WordPerfect files.
B. Scan Management
1. Workflow Composer and Connectors
imageRUNNER ADVANCE workflow processes can be simplified bycustomizing multiple step workflow functions into one-button operations. Theone-button operations are available from the Quick Menu of the UI (UserInterface). MEAP connectors for SMB (Server Message Block) and FTP(File Transfer Protocol) file delivery, inclusive of document indexing, comestandard on the new models, while connectors for imageWARE DocumentServer and SharePoint Server 2007 are available as options.
2. Authorized Send
Authorized Send is an intuitive MEAP application, which enables walk upusers to distribute documents quickly and securely. Authorized Send is anadaptable solution that integrates and authenticates with a wide variety ofauthentication servers, and enterprise systems using common protocols.Authorized Send permits only authorized users to scan and send documentsto e-mail addresses, network file servers/folders and fax servers. An end-user is able to specify scan settings, such as paper size, resolution,brightness, and file format.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 31
3. uniFLOW (Scanning)
uniFLOW offers a wide range of advanced scanning capabilities. uniFLOWscanning functions can be linked with print activities to result in customized,automated, and secure scan workflows.
4. Cloud Portal for imageRUNNER ADVANCE
imageRUNNER ADVANCE office system end-users have access to GoogleDocs cloud services from the User Interface. End-users can scan hard-copydocuments into Google Docs as well as print documents stored in GoogleDocs. To scan, store, or print documents, users need to log-in to the cloudservice from the front panel of an imageRUNNER ADVANCE officesystem—no PC or laptop is required.
Note: The Direct Printer Kit (for PDF/XPS)-H1 or PS Printer Kit-AV1 isrequired to print.
5. eCopy ShareScan
The eCopy ShareScan is an enterprise-ready, office scanning softwaresolution that enables the Canon imageRUNNER ADVANCE devices to turnpaper documents into digital information that for integration into an end-user’s communication, collaboration, workflow, and business applications.Paper-based information can be integrated with an end-users backendrepository alleviating the burden of manually re-keying information or filingpaper documents.
C. Print/Output Management
1. Canon Mobile Printing
Canon Mobile Printing is an application available for the Apple iPhone andiPad that enables mobile printing to imageRUNNER ADVANCE devices aswell as Canon Multi-Function and Single Function devices. The CanonMobile Printing application includes print and finishing options for the mobileend-user. This application is available at no charge and does not requireadditional accessories or MEAP applications to operate.
The Canon Mobile Printing application is ideal for corporate and SMBenvironment end-users that require a method to print without the need todisrupt current print workflows or add hardware or software. Canon MobilePrinting supports a variety of file formats including image, photo, PDF,document files and web page file formats.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 32
2. Direct Print and Scan for Mobile
Direct Print and Scan for Mobile is a peer-to-peer mobile solution, whichprovides mobile print and scan functionality between mobile devices(iPhone, iPad and BlackBerry smart phones) and Canon imageRUNNERADVANCE Devices.
Direct Print and Scan for Mobile is a combination of a MEAP application thatruns on a Canon imageRUNNER ADVANCE device and a client mobileapplication that resides on the mobile device. Together, the applicationsprovide communication between the mobile devices and CanonimageRUNNER ADVANCE device to allow users to perform print and scanfunctions.
Note: The Direct Printer Kit (for PDF/XPS)-H1 or PS Printer Kit-AV1 isrequired to print.
3. uniFLOW
uniFLOW is a print/output management solution that can be customized tomeet the needs of an organization. uniFLOW offers an organization of anysize, a way to have printing productivity, secure follow-me printing, costmanagement, document capture, device management, mobile printing andother capabilities available in the core features and add-on modules.
uniFLOW is designed to save time and expenses by providing effectivecontrols over its entire print fleet. Organizations will be able to identify andmanage the cost of printing, copying, scanning, and faxing across yourenterprise. uniFLOW is capable of identifying users’ printing behaviors andaddress their needs to improve the overall efficiency of printing and security.
4. Advanced Anywhere Print (AA-PRINT)
The AA-PRINT solution combines Universal Login Manager with secureanywhere printing. It is designed to provide a serverless print environmentthat allows end-users to print and track usage from anywhere within thenetwork to any connected device by submitting their respectiveauthentication credentials.
5. Universal Login Manager
The Universal Login Manager (ULM) is a MEAP application developed byNT-ware for imageRUNNER ADVANCE devices to provide a server-lesssolution for simple user authentication with image login and proximity cardlogin support. The ULM application helps to utilize the native capabilities ofthe imageRUNNER ADVANCE for personalization, and delivers basic usageand cost reporting functionality. The ULM also utilizes the AccessManagement System for additional control of access per end-user.Additionally, the ULM is used as login application for AA-Print.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 33
Key Features, Functionality, & Benefits of ULM
Login – Provides login manager functionality to lock devices before use.ULM offers users the ability to login by image login, PIN code, ActiveDirectory, or Proximity Card.
Personalization – Provides customization capabilities for the device toenable end-users to automate commonly performed tasks for enhancedproductivity.
Security – ULM integrates with Canon’s Access Management Systemfunctionality for advanced security, where it can control physical accessto the device, per user and function.
Usability – Provides pass-through login for other device functions. Accountability – ULM provides simple tracking capabilities for cost
visibility through usage reporting on up to 10 devices. Upgradable – ULM can be upgraded to the uniFLOW server. ULM can
be installed without a uniFLOW server. When a uniFLOW server isavailable, the ULM acts as an original login manager. Largerorganizations and environments that are more demanding can accessenterprise-level control, management, and Data Loss Preventionservices through Canon’s uniFLOW platform solution.
6. EFI PrintMe
EFI PrintMe is a cloud based mobile print solution for the imageRUNNERADVANCE Series that allows end-users to print electronic files from theirmobile devices such as smartphones, tablets, and laptops to a CanonimageRUNNER ADVANCE devices through the EFI PrintMe Cloud Service.Files uploaded to the EFI PrintMe Cloud Server are secured with a 128 bitencryption. Walk up end-users can print their document from the EFIPrintMe Cloud Service to a registered imageRUNNER ADVANCE deviceconnected to the internet.
End-users have three methods to upload files to the EFI PrintMe Server:
E-mail. An end-user can e-mail a file as an attachment (or forward an e-mail with an attachment) to the EFI PrintMe ([email protected]) CloudService. The end-user will receive a confirmation e-mail with a DocumentID Code.
Web upload. An end-user can upload files directly to the EFI PrintMeServer from the EFI PrintMe website (www.printme.com). The end-userwill see a popup window which will include the Document ID Code aswell as receive a confirmation e-mail with the Document ID Code.
PrintMe printer driver. Available from www.printme.com, the printer driverenables end-users to upload files from a laptop or workstation to the EFIPrintMe Server. The end-user will see a popup window, which willinclude the Document ID Code.
Note: The Direct Printer Kit (for PDF/XPS)-H1 or PS Printer Kit-AV1 isrequired to print.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 34
D. Device Security and Management
1. Advanced Authentication – Proximity Card (AA-PROX)
Advanced Authentication Proximity Card (AA-PROX) solution is a loginplatform that authenticates walk up end-users to access the features of theimageRUNNER ADVANAVCE device via a registered proximity card and/orentering a user name and password. The AA-PROX authenticates againstActive Directory or Local User Database on devices and can be combinedwith Access Management System (AMS) based functional level login andimageWARE ADVANCE Tracker for usage tracking and control, to enforceaccess control to system functions. AA-PROX can allow/disallow users tocreate user-defined personalized Quick Menu, Workflow Composer favoriteskeys or access Advanced Box.
2. imageRUNNER ADVANCE Tracker
imageRUNNER ADVANCE Tracker is a serverless output tracking and costrecovery solution designed specifically for the imageRUNNER ADVANCESeries. It tracks per-user device usage on a per function basis throughdepartment IDs and Windows logon names. imageRUNNER ADVANCETracker allows for monitoring, managing, and allocating cost of usage toprevent inefficient and wasteful usage.
Copy, print, scan, and fax tracking can be done by device, user, anddepartment ID.
3. imageWARE Enterprise Management Console and Plug-ins
imageWARE Enterprise Management Console is a web-based networkdevice management utility that enables centralized installation andmanagement of network devices installed across enterprises.
imageWARE Enterprise Management Console provides the customer withthe ability to discover devices, view device status, manage device settingsusing tasks, and notify end-users of device errors via e-mail. Thecapabilities of imageWARE Enterprise Management Console are expandedusing optional plug-in applications.
The imageWARE Enterprise Management Console and many plug-ins areavailable at no charge. The imageWARE Enterprise Management Consoleand optional plug-ins are available for the customer and/or dealer throughCanon U.S.A.’s www.imageware.com website or to the dealer only throughCanon U.S.A.’s e-Support Center website www.support.cusa.canon.com.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 35
4. uniFLOW Device Security & Management
uniFLOW, the print/output management solution, includes multipleauthentication methods to enable an organization to restrict access to animageRUNNER ADVANCE on a per user basis. In addition, uniFLOWauthentication methods can restrict access to imageRUNNER ADVANCEfeatures on a per user basis. uniFLOW, end-users can be required toauthenticate themselves in one or more of the following methods:
Entering the end-user usernames, codes, and passwords Using various smart, proximity, or magnetic cards
5. uniFLOW Serverless Secure Print
uniFLOW Serverless Secure Print is a secure printing and follow-me printingoption that utilizes the end-user’s client PC to store secure print jobs untilthe end-user can authenticate and release the secure print jobs at animageRUNNER ADVANCE device. The imageRUNNER ADVANCE devicethen pulls the print job from the end-user’s client PC. uniFLOW ServerlessSecure Print is scalable and upgradeable to the full version of uniFLOW.
6. MEAP Web
MEAP Web is a MEAP application that serves as an online thin clientmanagement tool. End-users manage MEAP Web using Web AccessSoftware. MEAP Web configures and manages imageRUNNER ADVANCEhardware and software resources.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 36
V. Dealer Sales/Service Authorization
To obtain and maintain authorization to sell or service an imageRUNNER device,every Authorized Reseller’s location must have at least two employees who havesuccessfully completed the appropriate imageRUNNER device-training program,and who has been certified, as described in Educational Training.
VI. Educational Training
A. Training Program Overview
The learning path for the new imageRUNNER ADVANCE products has beendesigned to build the knowledge and skills of your support professionals in waythat will impact your customers in the most positive manner, both in the supportof the product and the solutions you offer.
The learning path for service technicians without a certification for theimageRUNNER ADVANCE 8200/8000/6200/6000 Series product (see Figure 1below) start with a comprehensive blended imageRUNNER ADVANCE Systemsprogram to build the foundation of the user interfaces and the expanded productfunctionality, then concludes with a blended program focused on the hardwareknowledge and skills needed for your technicians.
Service technicians with a certification on the imageRUNNER ADVANCE8000/6000 Series would need to follow the Certified Technician learning path(see Figure 2 below) by completing an online imageRUNNER ADVANCESystems Update Course followed by the imageRUNNER ADVANCE 8200/6200Hardware Update online Course.
Figure 1 – Learning Path for Service Technicians not certified on theimageRUNNER ADVANCE 8000/6000 Series
Figure 2 – Learning Path for Certified imageRUNNER ADVANCE 8000/6000 SeriesTechnicians
Certified ServiceTechnicians and
SystemsEngineers
imageRUNNER ADVANCE SystemsUpdate
Online Course (18IRTASU00O)
imageRUNNER ADVANCE8200/6200 Hardware Update
Online Course (18IRTA8200O)
Non-CertifiedService
Technicians andSystems
Engineers
imageRUNNER ADVANCE SystemsBlended Training
Online Course (07IRTAS02O)And 3-Day Classroom Course
(07IRTAS01O)
imageRUNNER ADVANCE8000/8200 and 6000/6200 Series
Servicing and MaintenanceBlended Training
Online Course (18IRT810500O) and2-Day Classroom Course
(18IRT810501C)
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 37
B. Certification
The successful completion of the imageRUNNER ADVANCE 8200/6200 SeriesTraining program and passing of the final assessment exam are required to sellthis product.
Certification includes the following models:
imageRUNNER ADVANCE 8295, 8285, 8205 imageRUNNER ADVANCE 6275, 6265, 6255
C. Who Should Attend
It is highly recommended that any technician responsible for installing, servicing,or supporting the imageRUNNER ADVANCE 8200/6200 Series machinessuccessfully complete the e-Learning training course and pass the finalassessment exam.
Note: Our current support policy dictates that only those technicians who havecompleted the training program and pass the final assessment exam are entitledto live, phone-based support through our TSC (Technical Support Center).However, self-service support (software downloads, knowledgebase articles,support forums, technical publications) is available through oure-Support Center Web site for all technicians. (Refer to the Technical Supportsection on the e-Support Web site for entitlement details.)
D. Learning Path for Service Technicians not certified on the imageRUNNERADVANCE 8000/6000 Series
1. Online Courses – Technician Training
The online Systems and Hardware modules are available on e-Support. Youcan view the course overview of each course for more detailed informationpertaining to the content of each course. You can also view the estimatedtime for completion of each module on the course content page. Each of thecourses below are designed to teach theory, which will be reinforced duringthe hands-on activities in the classroom and will provide your Techniciansand Systems Engineers with the complete knowledge required for theinstallation, configure, and support of the imageRUNNER ADVANCE8200/6200 Series.
Table 9 – Online Modules
Course Name Course Code11
Required
imageRUNNER ADVANCE Systems 07IRTAS02O Yes
imageRUNNER ADVANCE 8000/6000 and8200/6200 Series Overview
18IRT810500O Yes
11 Part numbers are subject to change without notice.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 38
2. Classroom – Technician Training
Building on the eLearning modules, there is a 3-day Systems, and a 2-dayimageRUNNER ADVANCE 8200/6200 hardware classroom program. TheClassroom courses will blend information taught online with the hands-onand practical application in the classroom. Each student will have anopportunity to practice disassembly and installation of key components aswell as the practical exercises for troubleshooting many areas of themachine and accessories. This hands-on approach will focus on givingeach Technician and Systems Engineer the ability to support theimageRUNNER ADVANCE 8200/6200 and meet the needs of yourcustomers.
Table 10 – Classroom Courses
Course Name Course Code11
Required
imageRUNNER ADVANCE Systems 07IRTAS01O Yes
imageRUNNER ADVANCE 8000/8200 and6000/6200 Series Servicing and Maintenance
18IRT810501C Yes
11 Part numbers are subject to change without notice.
3. Prerequisites
Prior to enrolling into the blended technician training program, each studentwill have to successfully achieve a certification of the Applied Technologies(or equivalent) course.
Table 11 – Prerequisite Courses
Course Name Course Code11
Required
Applied Technologies Online Course 07TAT00ONEW Yes
Applied Technologies Classroom Course 07TAT01CNEW Yes
11 Part numbers are subject to change without notice.
E. Learning Path for Service Technicians certified on the imageRUNNERADVANCE 8000/6000 Series
Table 12 – Update Courses
Course Name Course Code11
Required
imageRUNNER ADVANCE Systems Update 18IRTASU00O Yes
imageRUNNER ADVANCE 8200/6200 HardwareUpdate
18IRTA8200O Yes
11 Part numbers are subject to change without notice.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 39
F. Training Facilities
1. Classroom
Classroom training is available in each of the five Canon regional trainingcenters.
Jamesburg, New Jersey Norcross, Georgia Irving, Texas Itasca, Illinois Irvine, California
2. e-Learning
The e-Learning course is located in the e-Learning center on Canon U.S.A.,Inc.’s (hereinafter referred to as (“Canon USA”)) e-Support Web site:http://www.support.cusa.canon.com. Certification maps on the e-SupportWeb site provide easier access to the training. This e-Learning course canbe conducted at any Dealer facility that is suitable for online studentlearning. An imageRUNNER ADVANCE 8200/6200 Series device must beavailable to complete the labs.
G. Course Equipment
Windows workstation (Vista, XP, 2007, or higher) Microsoft Internet Explorer v7.0 or higher imageRUNNER ADVANCE 8200/6200 Series device Applicable accessories (hardware and software)
H. Service Materials
Printed Service Manuals and Parts Catalogs will be provided for reference useduring the classroom course. An electronic PDF file of the Service Manuals willbe made available to each student as part of the online course and at theconclusion of the classroom course. The student will be provided a printedTechnical Reference Guide at the conclusion of the classroom course.
Service Manuals will be available in electronic format via download as part of theeLearning course and the Canon e-Support website athttp://www.support.cusa.canon.com.
Table 13 – Service Materials
Model Item Location
imageRUNNER ADVANCE 6200 Series
e-Learning Training Program Conducted online
Service Manual Downloadable from withinthe e-Learning course and
thee-Support Center Web siteParts Catalog
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 40
VII. Servicing Notes
A. Power and Plug Requirements
The imageRUNNER ADVANCE 6200 Series Main Unit requires a dedicatedsingle-phase 120V/20A NEMA 5-20R receptacle for proper operation. Beforeinstallation, confirm that a dedicated NEMA receptacle is available for thisdevice.
Canon USA Inc. strongly suggests dedicated and properly grounded receptaclesbe provided for the optional accessories.
Table 14 – Power and Receptacle Requirements for Main Unit and Accessories
Description Power Supply Power Receptacle
imageRUNNER ADVANCE 6200 Series 120 V/20 A NEMA 5-20R
Paper Deck Unit-A1 From the Main Unit N/A
Paper Deck Unit-D1 From the Main Unit N/A
Staple Finisher-P1 From the Main Unit N/A
Booklet Finisher-P1 From the Main Unit N/A
External 2/3-Hole Puncher-A1 From the Main Unit N/A
Document Insertion Unit-L1 120 V/15 A outlet NEMA 5-15P
Document Insertion/Folding Unit-H1 120 V/15 A outlet NEMA 5-15P
Canon PCL Printer Kit AV1 From the Main Unit N/A
Canon PS Printer Kit-AV1 From the Main Unit N/A
Table 15 – Power and Receptacle Requirements for Controllers
Description Power Supply Power Receptacle
imagePASS-U2 120 V/15 A outlet NEMA 5-15R
imageRUNNER ADVANCE 6200 Series Service Guide
Revision 1
Figure 3 – Power and Receptacle Requirements
B. Hardware Configuration Chart
Figure 4 – Hardware Configuration Chart
imageRUNNER ADVANCE 6200 Series Service Guide
200 Series Service Guide
Power and Receptacle Requirements
Hardware Configuration Chart
Hardware Configuration Chart
00 Series Service Guide
December 2013
Page 41
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 42
C. Installation Weight & Dimensions
The imageRUNNER ADVANCE 6200 Series approximate weight anddimensions differ depending on how it is configured with the optionalaccessories. The dimensions are for reference only and should not be confusedwith the required space for installation.
Table 16 – Approximate Weight
Component Approximate Weight
imageRUNNER ADVANCE 6275/6265/6255 Series 516 lb 234 kg
Paper Deck Unit-A1 81.6 lb 37 kg
Paper Deck Unit-D1 125.7 lb 57 kg
Staple Finisher-P1 106 lb 48 kg
Booklet Finisher-P1 159 lb 72 kg
External 2/3-Hole Puncher-A1 17 lb 7.7 kg
Document Insertion Unit-L1 88.2 lb 40 kg
Document Insertion/Folding Unit-H1 168 lb 76 kg
Copy Tray-Q1 2.4 lb 1.1 kg
Copy Card Reader-F1 7.1 oz 200 g
Table 17 – Dimensions
Unit Height Width Depth
imageRUNNER ADVANCE 6200 Series 48" 1,220 mm 25 3/8" 645 mm 30 3/8" 770 mm
Paper Deck Unit-A1 22 1/2" 570 mm 12 3/4" 323 mm 23" 583 mm
Paper Deck Unit-D1 22 1/2" 570 mm 23 5/8" 601 mm 24 1/2" 621 mm
Staple Finisher-P1 44 1/8" 1,121 mm 29 1/2" 748 mm 25 7/8" 656 mm
Booklet Finisher-P1 44 1/8" 1,121 mm 29 1/2" 748 mm 25 7/8" 656 mm
External 2/3-Hole Puncher-A1 32 7/8" 367 mm 4 1/4" 107 mm 24 1/4" 615 mm
Document Insertion Unit-L1 48 7/8" 1,242 mm 26 1/8" 662 mm 26 3/4" 679 mm
Document Insertion/Folding Unit-H1 48 7/8" 1,242 mm 26 1/8" 662 mm 26 3/4" 679 mm
Copy Tray-Q1 6 7/8" 175 mm 16 1/2" 420 mm 15" 382 mm
Copy Card Reader-F1 1 5/8” 40 mm 3 1/2” 88 mm 3 3/4” 96 mm
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 43
Table 18 – Dimensions Diagram
imageRUNNER ADVANCE 6200 Series
Staple Finisher25 5/8” (649 mm)
Ext
ern
al2/3
-Hole
Pu
nch
er
41/4
”(1
07
mm
)
DocumentInsertion Unit
9 3/4”(247 mm)
Main Unit25 3/8” (645 mm)
Paper Deck Unit-A112 3/4” (323 mm)
Booklet Finisher25 5/8” (649 mm)
DocumentInsertion/
Folding Unit9 3/4” (247
mm)
Paper Deck Unit-D123 5/8” (601mm)
89 3/8” (2,269 mm)
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide
Revision 1
D. Installation Space Requirements
The imageRUNNER ADVANCE 6200 Series machine approximate installationspace requirements may differ, depending on how the machine is configuredand the optional accessories attached. Always ensure that there is enoughspace for service and operation of the device.
Notes:
Provide at least 19 3/4” (500 mm) on the sides and the front of the machinefor unrestricted operation, including the opening of the main unit andaccessory doors.
With the main unit only, provide at least 4” (100 mm) behind the machine tothe wall for unrestricted operation, including the opening of the main unitdoors.
With the accessories attached, provide at least 31 1/2” (800 mm) behind themachine to the wall for unrestricted operation, including the opening of themain unit and accessory doors.
Do not place anything around the machine. Especially, do not placeanything around the breaker, as doing so may prevent access to the breakerin an emergency, possibly resulting in personal injury.
Table 19 – Minimum Configuration Installation Space Requirements
Main Unit with the Duplex Color Image Reader Unit-G1 and the Copy Tray–Q1 attached
December 2013
Page 44
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 45
Table 20 – Maximum Configuration Installation Space Requirements
Maximum Configuration
Main Unit with the Duplex Color Image Reader Unit-G1,Document Insertion/Folding Unit-H1,External 2/3 Hole Puncher, Booklet Finisher-P1, Upright Control Panel, and Paper Deck Unit-D1
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 46
E. Estimated Installation Times
The table below indicates the estimated length of time needed to unpack andinstall the main unit and optional accessories, calculated from the averageamount of labor hours. The estimated unpack and installation times are basedon one (1) experienced technician unless otherwise indicated.
Table 21 – Estimated Installation Times
Estimated Installation Times
DescriptionEstimated
Unpack Time
EstimatedInstallation
Time
EstimatedTotal Time
imageRUNNER ADVANCE 6200 Series 8 minutes 26 minutes 34 minutes
Duplex Color Image Reader Unit-G151
3 minutes 10 minutes 13 minutes
Paper Deck Unit-A1 4 minutes 14 minutes 18 minutes
Paper Deck Unit-D1 4 minutes 19 minutes 23 minutes
Staple Finisher-P1 7 minutes 10 minutes 17 minutes
Booklet Finisher-P1 7 minutes 10 minutes 17 minutes
External 2/3 Hole Puncher-A1 7 minutes 10 minutes 17 minutes
Document Insertion Unit-L1 7 minutes 14 minutes 21 minutes
Document Insertion / Folding Unit-H1 7 minutes 15 minutes 22 minutes
Utility Tray-A2 1 minute 4 minutes 5 minutes
Copy Card Reader-F1 1 minute 6.5 minutes 7.5 minutes
Copy Card Reader Attachment-A2 1 minute 4 minutes 5 minutes
Control Panel Sheet-E1 4 minutes 17 minutes 21 minutes
Super G3 FAX Board- AL1 1 minute 10 minutes 11 minutes
Super G3 2nd Line Fax Board- AL1 1 minute 12 minutes 13 minutes
Super G3 3rd/4th Line Fax Board- AL1 1 minute 14.5 minutes 15.5 minutes
Voice Guidance Kit- F2 1 minute 11 minutes 12 minutes
Voice Operation Kit-C2 2 minutes 10 minutes 12 minutes
HDD Data Encryption & Mirroring Kit-C5 and theoptional HDD
1 minute 22 minutes 23 minutes
HDD Data Encryption & Mirroring Kit-C5 and theremovable HDD Kit
1 minute 28 minutes 29 minutes
USB Device Port-A2 1 minute 11 minutes 12 minutes
Additional Memory Type D (512MB) 1 minute 4 minutes 5 minutes
HDD Mirroring Kit-G1 2 minutes 22 minutes 24 minutes
Removable HDD Kit-AG1 2 minutes 18 minutes 20 minutes
Image Data Analyzer Board-B1 1 minute 5 minutes 6 minutes
Multimedia Reader/Writer-A2 1 minute 8 minutes 9 minutes
Serial Interface Kit-K1 1 minute 8 minutes 9 minutes
Copy Control Interface Kit-A1 1 minute 7 minutes 8 minutes
Upright Control Panel-E1 3 minutes 7 minutes 10 minutes
2.5inch/160GB HDD-J1 / 2.5inch/ 1TB HDD-K1 1 minutes 9 minutes 10 minutes
imagePASS U2 1 minute 45 minutes 46 minutes
51 Up to two (2) experienced technicians are required to install the Duplex Color Image Reader-G1 to the main unit.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 47
F. Recommended System Engineer Requirements
A System Engineer (SE)52 is recommended to work with Canon’s networkeddevices, and should have the following basic job functions:
Systems integration (pre-sale and post-sale) Installation Education of customers and dealership personnel Troubleshooting
To perform the above tasks successfully, it is crucial that the SE have strongcomputer and networking skills with a working knowledge in the following areas(listed in order of importance):
Computer Hardware (IBM-compatible and Macintosh) Computer Networking
Hubs/Switches/Routers Cabling
Network Communication Protocols:
TCP/IP v4/v6 TCP over NetBIOS
Currently Supported Operating Systems from :
Microsoft Windows Mac OS X UNIX/LINUX Novell Netware
Computer Software (Microsoft/Adobe/PageMaker) Printing Architectures
Print Server – Point & Print Printer Ports - Standard TCP/IP – RAW/LPR UFRII/PCL/PS
Scanning (TWAIN/ISIS)
It is also important that the SE have computer skills and working knowledge inthe following areas:
Other computer platforms (mainframe) Basic electronics
52 An SE (System Engineer) is a professional title often used by hardware vendors for individuals who perform systems related tasks,such as analysis, design, and programming. System Engineers are also often involved in pre-sales activities.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 48
The Education/Training (listed in preferred order) of a successful Canondealership’s SE include:
Novell CNA\CNE, Microsoft MCTS\MCITP\MSCE\Cisco CCNA\CCNE Two years of experience being a Canon Copier Service Technician (training
centered on connectivity products) A degree in Computer Science or Engineering, or a computer technician
with two years of experience is required in the above areas.
G. Serviceability
The imageRUNNER ADVANCE products are designed to improve serviceability,quality, and deliver lower service costs, which result in increased dealer serviceprofitability.
Enhanced serviceability, as part of the overall design of the imageRUNNERADVANCE products, enables a reduction in the time required to service themachine’s major components. Access to common parts and frequently-usedcomponents has been improved to enable technicians to perform tasks moreefficiently.
In addition, technology improvements and the FRU (Field Replaceable Unit)Program have reduced parts pricing, improved the cost per copy, and reducedthe price of the fixing roller.
Finally, the use of Remote Serviceability provides your dealership with remotemeter reading and service monitoring capabilities using imageWARE Remote,as well as the ability to maintain up-to-date machine firmware downloadsremotely and unobtrusively by using the CDS (Content Delivery System). All ofthese factors combined, helps to reduce the overall cost per copy, and enablescompetitive suggested maintenance pricing and favorable margins.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 49
H. Remote Serviceability
Remote Serviceability consists of imageWARE Remote and the CDS.
1. imageWARE Remote
The imageWARE Remote service collects meter readings (page counterdata, service part counter data) and service alerts (alarm, jam, and errorcodes) from Canon devices and third-party devices.
An imageRUNNER ADVANCE device, with the embedded RemoteDiagnostic System enabled, transmits meter readings and service alertsdirectly to the UGW (Universal Gateway) database.
The optional Remote Diagnostic System53 (RDS) Plug-in to the imageWAREEnterprise Management Console retrieves meter readings select servicealerts and supplies usage data from up to 1,000 Canon printers, Canonmultifunction devices and third-party devices utilizing the standard printerManagement Information Base (MIB). The RDS Plug-in transmits thecollected data directly to the UGW database. In addition, the plug-in canregister devices to the UGW database.
The dealership can retrieve the meter reading and service alert data via aWeb portal or using an optional integration applications to communicate thedata to your dealership’s back-end device management system.
imageWARE Remote provides the following labor cost reduction benefits:
Retrieve meter readings for billing, which reduces the need for an on-sitemeter read or a phone call to the customer to read the meters.
Anticipate part requirements by monitoring the imageRUNNERADVANCE meter readings. Monitoring the page counter and service partcounter data, the service technician can anticipate when a part requiresreplacement and have the part available during the next scheduledservice visit.
Investigate machine issues before visiting the customer site bymonitoring service alerts. The notification settings can be adjusted byyour dealership within the Web Portal or the integration application.
This enables the service technician to visit the customer with servicealert information and necessary parts, thereby, reducing revisits bythe service technician due to the unavailability of service parts.
Resolve simple issues over the phone, which reduces the need foran on-site service visit.
Schedule firmware downloads to one or more imageRUNNERADVANCE devices via the CDS (Content Delivery System), whichreduces the need for an on-site firmware upgrade.
53 The imageWARE Enterprise Management Console and Remote Diagnostic System Plug-in are available at no charge. For moreinformation, refer to the Technical Publication TP10 360 available from the Canon eSupport Center Website.
imageRUNNER ADVANCE 6200 Series Service Guide
Revision 1
2. Content Delivery System
The CDS is Canon’s next generation system for the delivery and installationof firmware and MEAP (Multifunction Embedded Application Platform)applications to imageRUNNER ADVANCE devices. The advantages of theCDS include reduced service costs (labor and trresolution and havingdownload and install on the imageRUNNER ADVANCE devices.
With the CDS end(.jar files and license fiimageRUNNER ADVANCE device. Additionally, sand related manuals(http://www.canon.com/fau/do
However, the value of using the CDS is realized when updating multipleimageRUNNER ADVANCE devices. You can save up to 40 minutes permachine for firmware
There are three methods, which helps you to deliver firmwaimageRUNNER ADVANCE devices:
Table 22 – CDS Firmware Delivery Methods
Method
ScheduledUpdate
(at device)
Update(remotelythroughUGW +CDS)
Update(at device)
Method A – This method ensures that the device wiversion of firmware installed. After a onetechnician, the imageRUNNER ADVANCE will automatically download andinstall new firmware as it becomes available. No further visits are necessaryfor firmware updates.
imageRUNNER ADVANCE 6200 Series Service Guide
200 Series Service Guide
Content Delivery System
he CDS is Canon’s next generation system for the delivery and installationof firmware and MEAP (Multifunction Embedded Application Platform)applications to imageRUNNER ADVANCE devices. The advantages of theCDS include reduced service costs (labor and travel), and improved first
and having the latest version of firmware always available todownload and install on the imageRUNNER ADVANCE devices.
end-users are able to download select MEAP applications(.jar files and license files) from the CDS server via the User Interface of theimageRUNNER ADVANCE device. Additionally, select client applicationsand related manuals are available from the CDShttp://www.canon.com/fau/downloads).
However, the value of using the CDS is realized when updating multipleimageRUNNER ADVANCE devices. You can save up to 40 minutes per
firmware downloading and installation.
There are three methods, which helps you to deliver firmwaimageRUNNER ADVANCE devices:
CDS Firmware Delivery Methods
DownloadFirmware
InstallFirmware
Frequency
ScheduledUpdate
(at device)Automatic Automatic
Recurringperiodically
updates after initialone
Update(remotelythroughUGW +CDS)
13 hours to7 days inadvance
AutomaticOne time asscheduled
Eliminate technician
ManualReduce duration of
date(at device)
Up to 7 daysin advance
AutomaticOne time asscheduled
ManualOne time on
demand
This method ensures that the device will always have the latestversion of firmware installed. After a one-time setup by the servicetechnician, the imageRUNNER ADVANCE will automatically download andinstall new firmware as it becomes available. No further visits are necessary
dates.
00 Series Service Guide
December 2013
Page 50
he CDS is Canon’s next generation system for the delivery and installationof firmware and MEAP (Multifunction Embedded Application Platform)applications to imageRUNNER ADVANCE devices. The advantages of the
avel), and improved first-callthe latest version of firmware always available to
download and install on the imageRUNNER ADVANCE devices.
download select MEAP applicationsfrom the CDS server via the User Interface of the
elect client applicationsfrom the CDS website
However, the value of using the CDS is realized when updating multipleimageRUNNER ADVANCE devices. You can save up to 40 minutes per
There are three methods, which helps you to deliver firmware updates to
Cost Savings
Fully unattendedupdates after initial
one-time setup (lessthan 5 minutes)
Eliminate technicianvisits
Reduce duration oftechnician visit
Fully unattendedupdate after
configuring (lessthan 5 minutes),
when usingautomatic
installation.
ll always have the latesttime setup by the service
technician, the imageRUNNER ADVANCE will automatically download andinstall new firmware as it becomes available. No further visits are necessary
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 51
Method B – This method enables the dealership to schedule a firmwaredownload to the imageRUNNER ADVANCE via the UGW. This method alsoprovides the option to install the firmware automatically without a servicetechnician on-site or manually with a service technician on-site.
Method C – This method provides service technician with access to themost recent version of firmware on demand at the machine as well ashaving the flexibility to schedule the installation for a later time. A servicetechnician visit is required for each firmware update (as compared to theone-time setup with Method A). However, the service technician no longerneeds to maintain a library of firmware versions.
I. Device Configuration Management
The Device Configuration Manager (DCM) is a standard feature of theimageRUNNER ADVANCE 6200 series. The DCM can reduce the installationtime for new or replacement imageRUNNER ADVANCE devices by exportingthe user mode and service mode settings of a current imageRUNNER orimageRUNNER ADVANCE device for import to a new or replacement device.
The settings can be exported from the current devices using via Remote UI,Device Information Delivery Function or via the service mode to USB memorymedia.
The settings can be imported to a new or replacement device using the RemoteUI, or from USB memory media via the service mode.
Refer to the imageRUNNER ADVANCE 6275/6265/6255 Service Manual fordetails.
The Device Migration Navigator is an application that can help the servicetechnician select the best migration tool (Remote UI, USB Memory Media) fordevice settings based on the source device, destination device, and settings totransfer. The Device Migration Manager delivers a printable report that will showthe service technician the tool(s) to use, the migration procedure as wellmigration limitations. The Device Migration Navigator is available at no chargefrom the Canon eSupport Center Website Download Center.
Note: This process is not to be confused with the process to back up or restoreRAM Data.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 52
J. Firmware Upgrades Using the Service Support Tool
The SST (Service Support Tool) (version 4.72 or later) is available via Canon’se-Support Center Web site (http://www.support.cusa.canon.com) for upgradingand backup/restore of RAM data.
1. Upgrade Functions:
The SST can upgrade the following system components:
System Software stored on the HDD Main Engine Firmware Accessory Firmware (Refer to the Service Support Tool User Manual for
a list of Supported Devices and Accessories) MEAP Contents Language HDD Format RUI (Remote User Interface) stored on the HDD BootROM stored on a FDIMM (Flash Double Inline Memory Module) on
the Main Controller PCB (Printed Circuit Board)
The imageRUNNER ADVANCE devices support firmware downloads fromthe SST and USB memory media. When the hard disk drive is replaced, theSST is used to format the new HDD and load software.
2. Backup / Restore RAM Data
If replacing and PCBs with FDIMMs attached or initializing RAM, the ServiceSupport Tool can be used to create a backup file of the RAM data on theFDIMMs and saved to a PC. Once the PCB has been replaced, the RAMbackup file can be restored to the imageRUNNER ADVANCE and factorysettings restored.
3. Requirements for Using the Service Support Tool
Recommended desktop PC or laptop requirements54
CPU: Celeron 400 MHz or higher (32-bit processor only)
Memory: 512 MB of RAM or more
Free HDD Space: 1 GB or more
Display: VGA 640 x 480 resolution or better, 256 colors or more
Operating System (any of the following):
Microsoft Windows 2000 Server/Professional
Microsoft Windows XP Professional or Home Edition
Microsoft Windows Vista 32 bit
Network connection: 10Base-T/100Base-TX, or a PCMCIA slot for anEthernet card
54 Specifications are subject to change without notice.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 53
Necessary Cables:
High-Speed USB 2.0 compliant cable (as short as possible to avoidconnection problems). Note: Do not use extension cables.
Cross-over Ethernet cable
USB Memory Media Specifications:
High-Speed USB 1.1 (2.0 recommended)
1 GB or more capacity
FAT 16 or FAT 32 format
Single partition
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 54
K. LMS (License Management System)
To activate optional software programs, you must obtain a license through theLMS server. This replaces the need for additional hardware or dongles toactivate new software.
The LMS is a server-based software license program. All purchased softwareapplication packages contain a license access number certificate with thedocumentation. The dealer must enter the license access number and theimageRUNNER ADVANCE device’s serial number into the LMS server togenerate a license key. The URL to access the LMS server is:http://www.canon.com/lms/ir/.
Figure 5 – License Management System
If there are activation or installation issues, contact the Technical SupportCenter. Be prepared to provide the product’s serial number, license accessnumber, and license key.
Notes: The license access number comes with the software. Keep the license
access number in a secure location, as it cannot be replaced if it is lost. The machine’s serial number can be found on the Counter Check screen on
the machine’s UI. Activated software programs are not impacted by normal service activity.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 55
L. Content Delivery System Web Site
The CDS Web site enables end-users to download, install, and activate selectMEAP applications (.jar and license files) via the imageRUNNER ADVANCEdevice directly, without the need to go through the LMS and ServiceManagement Service.
To manage licenses, register, and install MEAP applications, you can access theCDS directly from the imageRUNNER ADVANCE device’s touch panel display,enter the LAN (License Access Number) of the MEAP application whenprompted, and then follow the instructions on the touch panel display to installand register the MEAP application.
Some MEAP applications include a Software License Agreement to which youmust agree before you can complete the installation and registration process.
Additionally, you can download select client applications and related manualsfrom the CDS Web site located at: http://www.canon.com/fau/downloads.
Figure 6 – Content Delivery System Web Site
If there are activation or installation problems, contact the Technical SupportCenter, and provide the product’s serial number and LAN.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 56
M. Hard Disk Drive Handling
The imageRUNNER ADVANCE 6200 Series machines use a HDD (Hard DiskDrive) for storing firmware and image data. The HDD is easily affected by shock,vibration, and static charge. Therefore, its handling requires special care. Whentransporting an HDD, which is available as a service part, it must be kept in itsoriginal package until it is installed in a machine.
CAUTION
Canon USA or any of its affiliates or dealers are not liable for any damages forloss of data received or stored on the hard disk, including loss arising from lostopportunity to use such data, even if Canon is informed of the possibility of suchdamages. Therefore, it is recommended to not permanently store data on theHDD without having secured copies or printouts of such data. (Review the termsof the product's Limited Warranty for more details.)
IMPORTANT
If a HDD must be replaced due to a fault, all MEAP application files stored on itwill be lost, requiring all applications and their license files to be reinstalled, inaddition to replacing the HDD. Refer to the imageRUNNER ADVANCE6275/6265/6255 Series Service Manual for further details.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 57
N. Special Tools, Solvents and Oils
In addition to the standard tools used to service these devices, the followingspecial tools should also be carried by a service technician, according to thetool’s rank. For more information on the special tools, solvents, and oils below,see the imageRUNNER ADVANCE 6275/6265/6255 Series Service Manual.
Table 23 – Special Tools List
Description Part Number11
Rank Appearance Remarks
Digital Multimeter FY9-2002-000 A
Use for electricalchecks; foradjustment of laserpower incombination with thelaser powerchecker.
Cover Switch TKN-0093 A
Tester Extension Pin FY9-3038-000 A
Used as a probeextension whenmaking electricalchecks.
Tester Extension Pin(L Shaped)
FY9-3039-000 A
Used as a probeextension whenmaking electricalchecks.
Mirror PositioningTool
FY9-3046-040 BUsed for positioningmirror mounts.
NA-3 Test Sheet FY9-9196-000 AUsed foradjusting/checkingimages.
Electrode forchecking potentialsensor
FY9-3059-000 BSurface potentialsensor for zero-levelcheck
MTF TEST SHEET FY9-9453 N MTF adjustment
Rank Description
A: Each service person is expected to carry one.
B: Each five or so service persons are expected to carry one.11 Part numbers are subject to change without notice.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 58
Table 24 – Solvents and Oils
Name Uses Composition Remarks
AlcoholCleaning; e.g., glass,plastic, rubber;external covers.
Fluoride-family hydrocarbon Alcohol Surface activating
agent Water
Do not bring near fire Procure locally Substitute: IPA (isopropyl
alcohol)
AlcoholCleaning; e.g., metal;oil or toner stain.
Fluoride-family hydrocarbon Chlorine-family
hydrocarbon Alcohol
Do not bring near fire Procure locally Substitute: MEK
Lubricating oil (EM-50L)
Lubrication; e.g.,gears.
Special oil Special solid lubricating agent Lithium soap
Tool No.: HY9-0007
Lubricating oilLubrication; e.g.,scanner rail
Synthetic oil
Synthetic oil NTNCorporation EU-1
Tool No.: FY9-6028 (50cc)
Super lube greaseApply to the fixingassembly gears
Chemical synthesis oil Chemical synthesis oil Tool Number: FY9-6005
(80g)Tospearl (lubricant forPhoto-sensitive drumcleaning blade)
Used to preventdetachment of thedrum cleaning blade.
Tool No.: FY9-6007
Conducting greaseDrum slidingAssembly
Ether, polyterafluoethylene
Tool No.: FY9-6008 (10g)
Drum cleaning powderCleaning thephotosensitive drum.
Aluminum oxideZirconium silicate
Tool No.: FY9-6024
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 59
O. Consumables
Consumables are all products and materials that are consumed with regular useand cannot be reused. Such consumables include but are not limited to paper,chemicals, and toner.
A number of factors are considered to determine the approximate yieldexpectancy of a consumable item, including paper size and the amount ofcoverage per page.
Notes:
All consumables shown in the table below are estimates for referencepurposes only, and are subject to change without notice.
These models contain logic (a default setting) to help the dealer controlcosts by only allowing a toner bottle to be replaced by the end-usercustomer when approximately 5% of its content remains. However, this canbe disabled in Service Mode thereby allowing replacement of a bottle at anytime by the end-user customer. Please see the Service Manual for details.
Table 25 – Main Unit Consumables List
DescriptionPart
Number11 Quantity
Estimated
Life55 Remarks
GPR-37/38 Black Drum Unit 3765B003AA 1 6,000,000 pages
GPR-38 Black Toner 3764B003AA 1 56,00056
pages
11 Part numbers are subject to change without notice.
CAUTION
If your clothing or skin has come into contact with toner, wipe the toner offwith a tissue; then, wash the remaining toner off with water.
Do not use warm water, Warm water will cause the toner to jell and fusepermanently with the fibers of the clothing.
Toner will react and adhere to plastic material, avoid contact with plastic.
55 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier. Data is subject to changedepending upon many factors including, without limitation, monthly copy volume, environment, type of image printed and customerhandling of the equipment.
56 Estimated 6% toner coverage on LTR sized paper.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 60
P. Consumable Parts
Consumable parts are defined as those parts having a limited life that will bereached during a customer’s specific machine operation, and should then bereplaced as needed. Examples of consumable parts include, but are not limitedto, feed rollers and cleaner blades.
An estimated consumable parts list is provided in the table below to assist in theinitial parts/supplies planning. A consumable part’s life expectancy is directlyrelated to usage factors, such as paper size, paper quality, environment, usageapplication, and machine maintenance. Therefore, consumable parts do nothave a warranty, and Canon USA cannot guarantee a minimum life.
Note: All consumable parts shown in the table below are for reference purposesonly, and are subject to change without notice.
Table 26 – Main Unit Consumable Parts List
Main Unit Consumable Parts List
Description Part Number11
Quantity Estimated Life55
Remarks
Primary Charging Assembly FM3-7288-000 1 1,000,000 pages
Pre-transfer Charging Assembly FM4-7297-000 1 1,000,000 pages
Developing Cylinder FM4-5438-010 1 1,000,000 pagesHigh temperature/high humidityenvironment (30 deg C / 80%):500,000 sheets
Developing Roller FC0-2276-000 2 1,000,000 pages
Drum Cleaning Blade FL3-6291-000 1 600,000 pages Blade is reversed @ 300,000 sheets
Drum Separation Claw FB4-8018-010 3 500,000 pages
High temperature/high humidityenvironment (30 deg C / 80%):250,000 sheets
Drum Front Side SealFC8-7086-000
1 500,000 pages
Drum Rear Side Seal 1 500,000 pages
Scraper FC9-9153-000 2 500,000 pages
ETB FC8-7160-000 1 500,000 pages
Transfer Roller FC8-7159-000 1 500,000 pages
Brush Roller FC9-9022-000 1 500,000 pages
ETB Cleaning Blade FC6-1647-000 1 500,000 pages
Fixing Web FY1-1157-000 1 500,000 pages
Fixing Roller FC9-9163-000 1 500,000 pages
Fixing Roller Insulating Brush FC9-8069-000 2 500,000 pages
Fixing Roller Thrust retainer FC6-3501-020 2 500,000 pagesChange simultaneously with fixingroller
Pressure Roller Unit FM4-3160-000 1 500,000 pages
Pressure Roller Static Eliminator FC7-4287-000 1 500,000 pages
Upper Separation Claw FB5-3625-000 6 500,000 pages
11 Part numbers are subject to change without notice.55 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier. Data is subject to change
depending upon many factors including, without limitation, monthly copy volume, environment, type of image printed and customerhandling of the equipment.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 61
Table 26 – Main Unit Consumable Parts List Continued
Main Unit Consumable Parts List
Description Part Number11
Quantity Estimated Life55
Remarks
Cassette 3 Pickup Roller
FC5-2524-000
1 500,000 sheets
Cassette 4 Pickup Roller 1 500,000 sheets
Right Deck Pickup Roller 1 500,000 sheets
Left Deck Pickup Roller 1 500,000 sheets
Cassette 3 Feed Roller
FC5-2526-000
1 500,000 sheets
Cassette 4 Feed Roller 1 500,000 sheets
Right Deck Feed Roller 1 500,000 sheets
Left Deck Feed Roller 1 500,000 sheets
Cassette 3 Separation Roller
FC5-2528-000
1 500,000 sheets
Cassette 4 Separation Roller 1 500,000 sheets
Right Deck Separation Roller 1 500,000 sheets
Left Deck Separation Roller 1 500,000 sheets
Multi-purpose Tray SeparationRoller
FC6-6661-000 1 120,000 sheets
Multi-purpose Tray Feed Roller FB1-8581-000 1 120,000 sheets
11 Part numbers are subject to change without notice.55 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier. Data is subject to change
depending upon many factors including, without limitation, monthly copy volume, environment, type of image printed and customerhandling of the equipment.
Table 27 – Duplex Color Image Reader Unit-G1 Consumable Parts List
Duplex Color Image Reader-G1 Consumable Parts List
Description Part Number11
Quantity Estimated Life55
Remarks
Pickup roller FC8-5577-000 1 80,000 images
Feed roller 1 FL2-9608-000 1 80,000 images
Separation roller FB2-7777-020 1 80,000 images
Dust-colleting FC8-5633-000 2 80,000 images
Dust-colleting type E FC8-5727-000 8 80,000 images
Stamp FC7-5465-000 1 7,000 images
11 Part numbers are subject to change without notice.55 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier. Data is subject to change
depending upon many factors including, without limitation, monthly copy volume, environment, type of image printed and customerhandling of the equipment.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 62
Table 28 – Paper Deck Unit-A1 / Paper Deck Unit-D1 Consumable Parts List
Paper Deck Unit-A1 and Paper Deck Unit-D1 Consumable Parts List
Description Part Number11
Quantity Estimated Life55
Remarks
Pickup Roller (Front) FF5-7829-000 1 500,000 sheets
Pickup Roller (Rear) FF5-7830-000 1 500,000 sheets
Feed Roller FF6-1975-000 1 500,000 sheets
Separation Roller FB2-7777-020 1 500,000 sheets
11 Part numbers are subject to change without notice.55 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier. Data is subject to change
depending upon many factors including, without limitation, monthly copy volume, environment, type of image printed and customerhandling of the equipment.
Table 29 – Booklet Finisher-P1 / Staple Finisher-P1 Consumable Parts
Booklet Finisher-P1 and Staple Finisher-P1 Consumable Parts List
Description Part Number11
Quantity Estimated Life55
Remarks
Stapler FM2-0665-000 1 500,000 times
Stitcher FL2-0846-000 2 100,000 times Booklet Finisher-P1 Only
Delivery static charge eliminator (L) FC5-3667-000 1 1,000,000 pages
Delivery static charge eliminator (R) FC5-5571-000 1 1,000,000 pages
Inlet static charge eliminator FL2-0822-000 1 1,000,000 pages
Swing guide inside static chargeeliminator
4F3-0929-000 1 1,000,000 pages
Buffer roller FC5-3442-000 2 1,000,000 pages
Return roller (Rear) 4A3-0950-000 1 1,000,000 pages
Return roller (Front) 4A3-0951-000 1 1,000,000 pages
11 Part numbers are subject to change without notice.55 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier. Data is subject to change
depending upon many factors including, without limitation, monthly copy volume, environment, type of image printed and customerhandling of the equipment.
Table 30 – Document Insertion Unit-L1 Consumable Parts
Document Insertion Unit-L1 Consumable Parts List
DescriptionPart
Number11 Quantity Estimated Life
55Remarks
Pickup roller (upper) 4A3-3870-000 2 100,000 sheets
Separation roller (upper) 4A3-3868-000 1 100,000 sheets
Feed roller (upper) 4A3-3869-000 1 100,000 sheets
Torque limiter (upper) 4A3-3888-000 1 1,000,000 times
Horizontal Feed Collar FC5-3670-000 8 2,000,000 pages
11 Part numbers are subject to change without notice.55 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier. Data is subject to change
depending upon many factors including, without limitation, monthly copy volume, environment, type of image printed and customerhandling of the equipment.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 63
Table 31 – Document Insertion / Folding Unit-H1 Consumable Parts
Document Insertion / Folding Unit-H1 Consumable Parts List
DescriptionPart
Number11 Quantity Estimated Life
55Remarks
Pickup roller (upper) 4A3-3870-000 2 100,000 sheets
Separation roller (upper) 4A3-3868-000 1 100,000 sheets
Feed roller (upper) 4A3-3869-000 1 100,000 sheets
Torque limiter (upper) 4A3-3888-000 1 1,000,000 times
Horizontal Feed Collar FC5-3670-000 8 2,000,000 pages
Z fold delivery roller FC5-3670-000 10 2,000,000 pages
11 Part numbers are subject to change without notice.55 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier. Data is subject to change
depending upon many factors including, without limitation, monthly copy volume, environment, type of image printed and customerhandling of the equipment.
Q. Periodic Replacement Parts
Table 32 – Periodic Replacement Parts
Main Unit Periodic Replacement Parts
DescriptionPart
Number11 Quantity Estimated Life
55Remarks
Primary Charging Wire Unit FL3-4558-000 2 500,000 pages
All-in-one (Charging Wire + Spring)High temperature/high humidityenvironment (30 deg C / 80%):250,000 pages
Primary Charging Wire FB4-3687-000 AR 500,000 pagesHigh temperature/high humidityenvironment (30 deg C / 80%):250,000 pages
Primary Charging Wire cleaner FL2-4271-000 2 500,000 pages
Pre-transfer Charging Wire cleanerholder
FL2-2720-000 2 500,000 pages
Primary Grid Wire FY1-0883-000 AR 500,000 pages
Pre-transfer Charging Wire Unit FL3-4559-000 1 500,000 pages
All-in-one (Charging Wire + Spring)High temperature/high humidityenvironment (30 deg C / 80%):250,000 pages
Pre-transfer Charging Wire FB4-3687-000 AR 500,000 pagesHigh temperature/high humidityenvironment (30 deg C / 80%):250,000 pages
Pre-transfer Charging Wire cleaner FL2-4271-000 1 500,000 pages
Pre-transfer Charging Wire cleanerholder
FL2-2720-000 1 500,000 pages
Main Thermistor Unit FK2-7683-000 1 500,000 pages
Sub Thermistor FK2-7693-000 1 500,000 pages
Ozone Filter FL3-2134-000 1 6,000,000 pagesFor exhausting from the rear lowerside
Dustproof Filter FC8-9564-000 1 1,000,000 pages For primary charging
11 Part numbers are subject to change without notice.55 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier. Data is subject to change
depending upon many factors including, without limitation, monthly copy volume, environment, type of image printed and customerhandling of the equipment.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 64
R. Periodic Maintenance
The parts in the table below must be periodically: replaced, cleaned, inspectedor adjusted to ensure a specific level of machine performance. These parts arelikely to affect the performance once they fail even in the absence of externalchange or damage. Whenever possible, plan periodic maintenance so that it willcoincide with a scheduled service visit.
Table 33 – Main Unit Periodic Maintenance
Main Unit Periodic Maintenance
Part NameEstimated Interval55 Remarks
120,000 500,000 600,000 1,000,000 6,000,000As
needed
♦:Replacement (Periodical replacement) ●: Replacement (Consumable parts)Δ: Cleaning ×: Lubrication
Primary ChargingAssembly ●
Primary Charging Wire ♦In a high temperature/humidityenvironment (30 deg C/80%),replace at 250,000 sheets.
Primary Charging Wirecleaner ♦Primary Charging Wirecleaner holder ♦
Grid Wire ♦Pre-transfer ChargingAssembly ●Pre-transfer ChargingWire ♦
In a high temperature/humidityenvironment (30 deg C/80%),replace at 250,000 sheets.
Pre-transfer ChargingWire cleaner ♦Pre-transfer ChargingWire cleaner holder ♦
Developing Cylinder ●
Developing Roller ●
Drum Cleaning Blade ●Reverse the blade every300,000 sheets (single-sided).
Drum Separation Claw ●
Drum Front Side Seal ●
Drum Rear Side Seal ●
Scraper ● ΔClean with lint-free papermoistened with alcohol.
Dustproof Glass ΔDrum Cleaning UnitPlate Δ55 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier. Data is subject to change
depending upon many factors including, without limitation, monthly copy volume, environment, type of image printed and customerhandling of the equipment.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 65
Table 33 – Main Unit Periodic Maintenance Continued
Main Unit Periodic Maintenance
Part NameEstimated Interval
55
Remarks120,000 500,000 600,000 1,000,000 6,000,000
Asneeded
♦:Replacement (Periodical replacement) ●: Replacement (Consumable parts)Δ: Cleaning ×: Lubrication
Primary ChargingAssembly Shield Plate Δ Clean with lint-free paper
moistened with water.Pre-transfer ChargingAssembly Shield Plate Δ
Toner collection area Δ Crumb toner clusters.
Separation ClawMounting Base Δ Clean with lint-free paper
moistened with alcohol.Process Unit Rear Guide Δ
Drum Sliding Assembly ×
Apply lubricant at the DrumSliding Assembly whenabnormal sound is heard duringoperation.
Drum Surface ΔUsing lint-free paper, clean thedrum with the drum cleaningpowder
Drum Edge Δ
Clean with lint-free papermoistenedIn a high temperature/humidityenvironment (30 deg C/80%),replace at 250,000 sheets.
Lower side of DevelopingAssembly Δ
Remove toner scattered duringthe removal of the DevelopingAssembly.
Developing wheel Δ Clean with lint-free papermoistened with alcohol.
Lower side of Cylinder. Δ
Toner Receptacle Tray Δ Remove toner on the tray.
Waste Toner Container ΔClean when the message isdisplayed.
ETB ●
Transfer Roller ●
Brush Roller ●
ETB Cleaning Blade ●
ETB Driver Roller Δ Clean with lint-free papermoistened with alcohol.
ETB Idler Roller Δ
Fixing Web ●55 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier. Data is subject to change
depending upon many factors including, without limitation, monthly copy volume, environment, type of image printed and customerhandling of the equipment.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 66
Table 33 – Main Unit Periodic Maintenance Continued
Main Unit Periodic Maintenance
Part NameEstimated Interval
55
Remarks120,000 500,000 600,000 1,000,000 6,000,000
Asneeded
♦:Replacement (Periodical replacement) ●: Replacement (Consumable parts)Δ: Cleaning ×: Lubrication
Fixing Roller ● Fixing Roller InsulatingBush ●Fixing Roller Thrustretainer ●
Main Thermistor Unit ♦
Sub Thermistor ♦
Pressure Roller Unit ●Pressure Roller StaticEliminator ●
Fixing Inlet Guide Δ
Clean with solvent and lint-freepaper.Remove paper lint covered onthe Inlet Sensor Flag.
Fixing Oil Receiver ΔDry wipe
Fixing Web Guide Δ
Fixing Right Stay ΔClean with solvent and lint-freepaper.
Dowel Δ
Dowel Holder Δ
Upper Separation Claw ● Δ Clean this part when it is notreplaced. Clean with solventand lint-free paper.
Cassette 3 Pickup Roller/ ●
Actual use in terms of numberof prints.
Cassette 4 Pickup Roller ●
Cassette 3 Feed Roller / ●
Cassette 4 Feed Roller ● Cassette 3 SeparationRoller / ●Cassette 4 SeparationRoller ● Right Deck Pickup Roller/ ●
Left Deck Pickup Roller ● 55 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier. Data is subject to change
depending upon many factors including, without limitation, monthly copy volume, environment, type of image printed and customerhandling of the equipment.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 67
Table 33 – Main Unit Periodic Maintenance Continued
Main Unit Periodic Maintenance
Part NameEstimated Interval
55
Remarks120,000 500,000 600,000 1,000,000 6,000,000
Asneeded
♦:Replacement (Periodical replacement) ●: Replacement (Consumable parts)Δ: Cleaning ×: Lubrication
Right Deck Feed Roller / ●
Actual use in terms of numberof prints.
Left Deck Feed Roller ● Right Deck SeparationRoller / ●Left Deck SeparationRoller ●Multi-purpose TraySeparation Roller ●Multi-purpose Tray FeedRoller ●
Feed Guide ΔRemove paper lint with lint-freepaper and cleaning tool.
Rollers/wheels ΔClean with lint-free papermoistened with alcohol.
Separation StaticEliminator Δ
Remove paper lint (toner) withBlower.
Duplex Unit CleaningBrush Δ
Using a blower, remove paperlint collected by the CleaningBrush.
Registration Unit Magnet ΔClean with lint-free papermoistened with alcohol.
Scanner Sensor(FeedingAssembly) Δ
Using Blower, remove paper lintVertical Path Sensor 1(PS24) ,the Multi-purpose TrayLast Paper Sensor (PS28),theRegistration Sensor(PS29),Reverse Vertical PathSensor (PS65),Duplex OutletSensor (PS64), Duplex MergeSensor (PS67), and Duplex LeftSensor (PS66)
Ozone Filter ♦
Dustproof Filter ♦55 Value is based on LTR sized paper. Estimated average values in the field, based on data from supplier. Data is subject to change
depending upon many factors including, without limitation, monthly copy volume, environment, type of image printed and customerhandling of the equipment.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 68
S. Soft Counter
The imageRUNNER ADVANCE 6200 Series uses soft counters to track itsfunctional copy use. The control panel can display up to eight (8) counters onthe counter status check screen (when the counter check key button on thecontrol panel is pressed). By default, the imageRUNNER ADVANCE 6200Series displays six (6) counters on the counter status check screen.
The Table below indicates the default counter configurations of theimageRUNNER ADVANCE 6200 Series on the counter status check screen.
Refer to the imageRUNNER ADVANCE 6275/6265/6255 Series Service Manualfor complete details on the Soft Counter configurations.
Table 34 – Soft Counter Configuration
CounterCounter Description
(from Service Manual)DefaultDisplay
Adjustability of Display
1 101: Total 1 OnMay be Swapped to different TotalCounter via Service Mode setting
2 103: Total (Large) On
May be Changed via Service Modesetting to any available counter
3 201: Copy (Total 1) On
4 203: Copy (Large) On
5 Not Displayed Off
6 Not Displayed Off
T. MEAP Counter
The MEAP application counter counts the number of prints and scans made perMEAP application. You can view the MEAP counter by logging on to the MEAPSMS (Service Management Service) Application/License Information page via aWeb browser. (The computer you are using must be connected to the machineand network.) You can also view the MEAP counter from the MEAP device.Press the Counter Check button on the device’s control panel, and then pressthe MEAP Counter key on the touch panel display.
There are three types of MEAP applications:
Applet: Contains a user interface on the touch panel display of the device.Up to nine applet tabs can be displayed on the touch panel display of thedevice.
Servlet: Contains a remote, programmable user interface for theapplication via a Web browser.
Esplet: The application does not contain a user interface.
Each MEAP application has its own counter. There are 20 counters available forMEAP applications on the imageRUNNER ADVANCE 6200 Series machines.However, one of these 20 counters is used for Universal Send.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 69
VIII. Suggested End-User Customer Service Offerings
A. Monthly Copy/Print Volume
The maximum print/copy monthly volume is the maximum number of pages themachine can produce within a one-month period (based on letter size paper).However, the device should not be used to produce the maximum number ofpages, or a greater volume, on a consistent monthly basis.
The optimum performance range is the volume range that the equipment wasintended to run on a regular basis to maintain a high-level of performance andprint/copy quality.
Table 35 – Monthly Copy/Print Volume
ModelOptimum Performance Range
(based on LTR sized paper)
Maximum MonthlyVolume
(based on LTR sized paper)
imageRUNNER ADVANCE 6275 Approximately 30,000-150,000 Up to 350,000
imageRUNNER ADVANCE 6265 Approximately 30,000-110,000 Up to 250,000
imageRUNNER ADVANCE 6255 Approximately 30,000-70,000 Up to 220,000
Table 36 – Monthly Print Copy Volume Definitions
Monthly PCV Type Description
Optimum PCV
This is the print/copy volume range that the equipment was intendedto run on a regular basis to maintain a high level of performance andprint/copy quality. Running the equipment within this range ensuresthat no undue stress is placed on components, and it allows time forthe proper servicing and maintenance of the equipment.
Maximum MonthlyCopy/Print Volume
On occasion, the machine can produce up to the above prints/copies.However, sustained use of the machine at this level, will significantlyimpact the long term performance and durability of the machine. Youshould expect an increase in the number of service calls and downtime during periods of maximum production use.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 70
B. Limited Warranty Support
1. End-User Limited Warranty Conditions
Ninety (90) days after delivery to the original purchaser or 200,000prints/copies, or a combination of both, whichever comes first.
This limited warranty covers the product accessories. For detailed limitedwarranty information, please refer to the imageRUNNER ADVANCE6275/6265/6255 Series Limited Warranty located in the Appendix.
Note: No warranty is given on any consumables or consumable parts, suchas paper, toner, chemicals, or pick-up rollers.
2. GPR-37/38 Drum Unit Limited Warranty
Table 37 – GPR-37/38 Drum Unit Limited Warranty
Full Credit:100,000 prints or copies (or a combination of both) or 30 daysafter delivery to the original purchaser, whichever comes first.
Prorated Credit:2,000,000 prints or copies (or a combination of both) or 1 yearafter delivery to the original purchaser, whichever comes first.
For detailed limited warranty information, please refer to the GPR-37/38Drum Unit Limited Warranty located in the Appendix.
3. Flat-Rate Program
The Flat-Rate Program provides a flat-rate credit to Canon USA’s full-linedealers as compensation for warranty expenses that they may incur.Dealers who purchase an imageRUNNER ADVANCE 6200 Series devicewill receive a Flat-Rate Program credit during the month following theirpurchase. This credit covers the dealer’s cost of defective parts and drumswith a dealer cost under $300.00 that have been replaced during the termof the end-user’s Limited Warranty.
The Flat-Rate Program enables the dealer to return the more expensivemachine parts to receive reimbursement for in-warranty part failures. Theflat-rate credit is a percentage of your eligible machine purchases, drums,and accessories. Flat-rate credits are posted monthly in the CNA (CanonNetwork Access) section of Canon USA’s ISG Central Web site. Refer to theOnline Limited Warranty Credit Inquiry section for more information.
Original defective parts with a dealer cost over $300.00 that have beenreplaced during the term of the end-user warranty are eligible to receivereimbursement credit through the e-Tag process. Parts that are listed on theCanon USA Repairable Parts List should be sent to an APRF (AuthorizedParts Repair Facility) to be repaired at no charge.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 71
To request a part reimbursement credit, complete the e-Tag warranty claimform in the Warranty section of the e-Support Center Web site athttp://www.support.cusa.canon.com. Refer to the e-Tag section of thisService Guide for further details and instructions.
Additional information on the Flat-Rate Program is located on the CanonUSA’s e-Support Web site at http://www.support.cusa.canon.com, as shownin Figure 7 – e-Support: Flat-Rate Program.
Figure 7 – e-Support: Flat-Rate Program
4. Warranty Parts for Repair
The APRFs (Authorized Parts Repair Facilities) are authorized by CanonUSA to repair circuit boards for various Canon products. The APRF programis designed to help your dealership reduce service costs by having circuitboards repaired instead of purchasing brand new boards. Each circuit boardis live tested and updated to the latest firmware version prior to returning itto your dealership.
Parts specified on the Canon USA Repairable Parts List must be prepaidand shipped directly to one of the following Authorized Parts RepairFacilities. Log on to the Canon USA e-Support Web site athttp://www.support.cusa.canon.com to view the Canon USA RepairableParts List. Go to the Warranty tab, Part Repair Facilities, Repairable PartsList. See Figure 8 – e-Support: Authorized Parts Repair Facilities for moredetails.
imageRUNNER ADVANCE 6200 Series Service Guide
Revision 1
Table 38 – Authorized Part Repair Facilities
Hytec Dealer Services, Inc.3600 Vineland Road (Suite 121)Orlando, FL 32811
Telephone: 1-407
Customer Service:1
Technical Support: 1
Fax: 1-407-297-4310
Repairable partsAPRFs. Usually, the turnaround time is approximately five (5) businessdays. Once repairdealership via UPS Ground
If a part is not repairable, the APRF will contact your dealershipUSA’s Warranty Control Section will i
To check the status of your
The Repairable Parts List index ise-Support Center Web sitefrom the Repairable Parts List
Figure 8 – e-Support:
imageRUNNER ADVANCE 6200 Series Service Guide
200 Series Service Guide
Authorized Part Repair Facilities
Dealer Services, Inc.3600 Vineland Road (Suite 121)Orlando, FL 32811
Nation-Wide Repair Service, Inc.16151 Foster StreetOverland Park, KS 66085
407-297-1001 Customer Service: 1-866
Customer Service:1-800-883-1001 Technical Support: 1-800
Technical Support: 1-888-883-2001 Fax: 1-913-631-8372
4310
Repairable parts (under warranty) are repaired free-ofUsually, the turnaround time is approximately five (5) business
days. Once repaired and tested, the parts are shippeddealership via UPS Ground.
repairable, the APRF will contact your dealershipWarranty Control Section will issue a credit to your account.
To check the status of your part, please contact the APRF.
The Repairable Parts List index is in the Warranty section of theSupport Center Web site at http://www.support.cusa.canon.com
from the Repairable Parts List, as shown below, for the most current list.
Authorized Parts Repair Facilities
00 Series Service Guide
December 2013
Page 72
Wide Repair Service, Inc.
Overland Park, KS 66085
866-655-8676
800-798-1814
of-charge by theUsually, the turnaround time is approximately five (5) business
, the parts are shipped back to your
repairable, the APRF will contact your dealership, and Canonssue a credit to your account.
in the Warranty section of thehttp://www.support.cusa.canon.com Select
for the most current list.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 73
Warranty Parts over $300.00 that are not on the Repairable Parts List
All original defective parts with a dealer cost valued over $300.00, that arenot specified on the Repairable Parts List, must be submitted to CanonVirginia, Inc. with a completed e-Tag warranty claim form, and a handwrittenor computer-generated copy of the machine’s service history.
Canon Virginia, Inc.12000 Canon Boulevard
Newport News, VA 23606Attention: Warranty Returns
The service history log must include the following:
Dealer Name Part Description Machine’s Installation Date Date Part Was Removed Machine’s Serial Number Machine Copy Count Part Number Reason for Removal Work Performed (Highlight Current Service Call)
5. e-Tag
e-Tag is an electronic limited warranty claim form that is completed online,printed out, and accompanied by the original defective part or defectivedrum that is being returned to the Warranty Control Section for warrantycompensation.
The e-Tag warranty claim form can be accessed in the Warranty section ofthe e-Support Center Web site at http://www.support.cusa.canon.com.
Figure 9 – e-Support: e-Tag
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 74
To submit a new warranty claim, select the type of claim from thedrop-down list, shown below, and complete the required sections of thee-Tag limited warranty claim form.
Figure 10 – e-Support: e-Tag Claim Console
A copy of the e-Tag warranty claim form and the machine’s service historymust be returned with the original defective parts to the address provided onthe bottom of the e-Tag warranty claim form.
The service history log can be handwritten or computer-generated, andmust include the following information:
Dealer Name Part Description Machine’s Installation Date Date Part Was Removed Machine’s Serial Number Machine Copy Count Part Number Reason for Removal Work Performed (Highlight Current Service Call)
For defective drums, ship the drum to the address provided on the bottom ofthe e-Tag warranty claim form, accompanied by a copy of the e-Tagwarranty claim form, the machine’s service history log, a “before” samplecopy that depicts the problem, and an “after” sample copy that shows thatthe problem has been resolved.
After a claim form is authorized, parts, drums, and labor credits are postedon the CNA Web site the following business day.
imageRUNNER ADVANCE 6200 Series Service Guide
Revision 1
6. Online Limited Warranty Credit In
The Online Warranty Credit Inquirydownload, and printon the CNA (Canon Network Access)
a. e-Tag Inquiry
To view yourCentral Web site“Canon Network Access (CNA)
Figure 11 – ISG Central
imageRUNNER ADVANCE 6200 Series Service Guide
200 Series Service Guide
Warranty Credit Inquiry
ine Warranty Credit Inquiry enables your dealership to check,and print the details of your e-Tag and Flat-Rate
Canon Network Access) Web site.
Tag Inquiry
your e-Tag warranty claim credits online, log onWeb site at http://www.isgcentral.cusa.canon.com
Canon Network Access (CNA)”, as shown below.
ISG Central
00 Series Service Guide
December 2013
Page 75
your dealership to check,Rate Program credits
, log on to the ISGhttp://www.isgcentral.cusa.canon.com, and select
imageRUNNER ADVANCE 6200 Series Service Guide
Revision 1
On the CNA“e-Tag Warranty Claims Reimbursementclaims search
Figure 12 – CNA: Warranty Credit Inquiry
Figure 13 – CNA: e-Tag Warranty Claims Search
To check the status of
Go to the e-Tag Warranty Claim Consolescreen shot inconsole enablesdetails of the e
Note: e-Tag warranty claims are connected to thethat is enteredperson enter and manage the edealership.
imageRUNNER ADVANCE 6200 Series Service Guide
200 Series Service Guide
On the CNA Web site, select “Warranty Credit Inquiry”, andTag Warranty Claims Reimbursement” to perform an e
claims search, as shown in the following screen shots.
CNA: Warranty Credit Inquiry
Tag Warranty Claims Search
To check the status of the e-Tag warranty claims already submitted:
Tag Warranty Claim Console, as shown at the bottom of thescreen shot in Figure 10 – e-Support: e-Tag Claim
enables you to check the status of your claims.details of the e-Tag limited warranty claim form, double-
Tag warranty claims are connected to the e-Support ID numberthat is entered. Therefore, it is highly recommended that only one
enter and manage the e-Tag warranty claims from your
00 Series Service Guide
December 2013
Page 76
, and then selectto perform an e-Tag Warranty
already submitted:
as shown at the bottom of theClaim Console. This
you to check the status of your claims. To view the-click any record.
Support ID number. Therefore, it is highly recommended that only one
Tag warranty claims from your
imageRUNNER ADVANCE 6200 Series Service Guide
Revision 1
b. Flat-Rate Inquiry
To view yourISG Centralselect “Canon Network Access (CNA)
Figure 14 – ISG Central
On the CNA Web site, select“Flat-Rate Warranty Reimbursementclaims search, as shown in the following screen shots.
Figure 15 – CNA: Warranty Credit Inquiry
Figure 16 - CNA: Flat-
imageRUNNER ADVANCE 6200 Series Service Guide
200 Series Service Guide
Rate Inquiry
your Flat-Rate warranty reimbursements onlinetral Web site at http://www.isgcentral.cusa.canon.com
Canon Network Access (CNA)”, as shown below.
ISG Central
On the CNA Web site, select “Warranty Credit Inquiry”, and then selectRate Warranty Reimbursement” to perform a Flat
claims search, as shown in the following screen shots.
CNA: Warranty Credit Inquiry
-Rate Warranty Reimbursement Search
00 Series Service Guide
December 2013
Page 77
line, log on to thehttp://www.isgcentral.cusa.canon.com, and
as shown below.
, and then selectto perform a Flat-Rate Warranty
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 78
IX. Product Technical Support Offerings
A. Dealer Support Requirements
imageRUNNER ADVANCE 6200 Series Technical Training is required toreceive technical support for these machines. Refer to the Canon USA TechnicalSupport Center section for further details.
To ensure that every dealer receives the highest level of support and help toresolve the end user’s problems quickly and accurately, we recommend thefollowing to maximize your technical support request:
Your support personnel should check technical documentation (UserManuals, Technical Publications, etc.) and the e-Support Web site (24 hoursa day, 7 days a week) before calling Canon USA’s TSC (Technical SupportCenter), since your concern may have already been addressed anddocumented.
Have your Support ID number ready when you call the TSC, and make surethat you are where the engine or application is located and accessible. Thisdramatically improves the TSC’s ability to help troubleshoot the problem,and eliminate the “guesswork” when answering a specific question. Thisalso helps to supply you with answers that are more accurate.
Provide the serial number of the installed engine or application you want totroubleshoot. While the serial number is required to access support, it alsoprovides the Support Specialist with information about previous calls forsupport.
Make sure to provide environment-specific information, and any othersite-specific variables.
Submit and update your profile information, such as cell phone number,e-mail address, and company address on the e-Support Web site in theCurrent Profile section. You can also call Canon USA’s TSC. Accurateprofile information enables you to contact support personnel faster, and isnecessary, if more information is required from the caller later.
At the completion of each call, a ticket number is provided. If the SupportSpecialist does not provide a number, the caller should ask for it.
Have a Dealer Technician or Systems Engineer call Canon USA with whatresolved your issue. This information is helpful, and enables a SupportSpecialist to assist other callers who may have the same problem.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 79
B. Canon USA Support Offerings
The following support offerings were established to deliver high-quality, timelytechnical support services, and product information to Canon dealerships. Thesesupport services cover areas, such as system and user software, networkingand connectivity issues, electro-mechanical operations, and other hardwareservicing.
1. Canon USA Technical Support Center
Canon USA provides a time-sensitive call escalation process for allauthorized imageRUNNER ADVANCE 6200 Series dealers. The TSC is thesingle-point of entry for this process. Once a call is placed to the TSC andinformation is logged into the call management system, a case number isassigned to the call. Every effort is made to resolve the problem during thecall. Calls that cannot be resolved during the initial call and requireescalation must follow the process below. The status of all escalated casescan be viewed via e-Support or by calling the TSC.
Canon USA’s TSC support responsibilities are as follows:
The contracted servicing dealer solely provides all technical support forthe end-user.
The Canon USA TSC is the central contact/escalation for the reporting ofall known outstanding hardware and software issues to Canon USA’sengineering and software development groups.
The Canon USA TSC is available to all Authorized Dealers, SystemsEngineers, and Technicians who have successfully completed thetraining program.
The TSC provides technical information regarding all Canon associatedhardware and software products.
The TSC deploys, as required through proper escalation procedures, allon-site Canon USA Digital Solutions Specialists and Systems Engineers.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Ser
Revision 1
Table 39 – Canon USA Support Escalation Flow Chart
CanonimageRUNNER ADVANCE 6200
Series End-User
T
End-User ContactsServicing Dealer
Servicing Dealer ContactsCanon USA TSC
vice Guide
Canon USAechnical Support Center
1-800-528-2830
Canon USADigital Solutions
Specialist & SystemsEngineers
Canon USAEngineering
Assistance Required
StatusModify
Update Case
Update Case
December 2013
Page 80
Update Case
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 81
2. NAVI
NAVI is a computer-based application that is designed to function as bothan information resource and diagnostic tool for Canon dealershiptechnicians (equipped with a laptop) or dealer in-house help deskenvironments.
Figure 17 – NAVI: Login Screen
Figure 18 – NAVI: Main Screen
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 82
a. Benefits
Improves the time to resolution for the more challenging technicalsituations faced in the field.
Increases customer satisfaction by increasing the number of firstvisit problem resolutions, thereby reducing the number of requiredsecond visits.
Reduces the chances of incorrect or unnecessary parts usage withNAVI’s diagnostic abilities and reference information.
Enables device engine reporting to aid in service costs forecasting.
b. Features
Detects the device’s engine status.
Enables you to research a knowledge base of known problem casedata to solve a current machine problem when connected directly tothe machine or offline (connection to the machine has not beenestablished).
Provides access to model servicing information, such as workprocedures and electromechanical component references.
Provides a link to Canon Technical Documentation, which is offeredto dealers for sale on a CD-ROM.
Provides a link to Canon Service Tools, such as the SST (ServiceSupport Tool) and PDL Downloader.
Enables you to access the machine’s Service Mode from a computerrunning the NAVI application, and perform the Auto Reset function(returns all machine settings back to their initial or default values).
Enables you to adjust the machine’s error and jam thresholds.
Enables you to lookup replacement parts via a Web browser.
c. Getting Started with NAVI
(1) Participate in Training
The NAVI e-Learning course is available on e-Support for thosetechnicians who have computer skills and use the SST. TheNAVI e-Learning course is interactive, and contains guidedsimulations that show the technician how to use NAVI to service,maintain, and troubleshoot Canon devices. Technicians takingthe NAVI e-Learning course will also learn how to make NAVI anintegral part of their tool kit.
After the successful completion of the NAVI e-Learning course,technicians can begin to use NAVI as the tool to help themresolve field issues in a timely manner.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 83
(2) Get the NAVI Files
There are two ways to get the files to start using NAVI:
Download the necessary files from the e-Support Web site free-of-charge. It is recommended to download these files via a high-speed Internet connection, as the files are large.
Purchase the NAVI Catch-Up CD Set. The Catch-Up CD Setcontains the basic NAVI program, documentation, and modelfiles to add previously introduced models to a computer withNAVI installed.
(3) Install NAVI and Use the Program
Use the following procedure to install and use NAVI:
Install the core NAVI program and any patches.
Add model support, as necessary.
Add any updated model case data.
If you have previously issued technical documentation onCD-ROMs, you can link these files with NAVI.
d. Updates
Continuous updates to each imageRUNNER ADVANCE model’sUpdate Data Pack are available for download from the e-Support Website free-of-charge.
e. NAVI Support
For additional details and information on NAVI, refer to the NAVImini-home page on the e-Support Web site, located in the “TechSupport” tab.
Figure 19 – e-Support: NAVI’s Mini-Home Page
imageRUNNER ADVANCE 6200 Series Service Guide
Revision 1
3. Internet Support
a. Canon USA
Canon USAhigh-quality eUSA’s Authorized Servicing Dealers.
Canon USA’s eTechnicians access to technical support information via the WorldwideWeb.
The following functions and information can be accessed:
Proactive notification of new releases, patches, TechnicalPublications, and other
Search forManagement System through
Read or download on Download patches and their Readme files Download Track and Review all open
To access eNumber. To register for aUSA’shttp://www.support.cusa.canon.comfollow the instructionsto all authorized dealers
Figure 20 – e-Support: Login Screen
imageRUNNER ADVANCE 6200 Series Service Guide
200 Series Service Guide
Internet Support
Canon USA’s e-Support Center Web Site
Canon USA’s Engineering Services and Solutions Division providesquality e-Support via the Internet, and is only available for’s Authorized Servicing Dealers.
’s e-Support is designed to provide Systems Engineers andTechnicians access to technical support information via the Worldwide
The following functions and information can be accessed:
Proactive notification of new releases, patches, TechnicalPublications, and other information via e-mail messageSearch for technical solutions with the IntegratedManagement System through a natural language queryRead or download on-line documentationDownload patches and their Readme filesDownload firmware and software driversTrack and modify logged casesReview all open cases
access e-Support, you must first register for a. To register for an e-Support ID number, go to the
e-Support Center Web sitehttp://www.support.cusa.canon.com. Click on the “Registerfollow the instructions. This service is available at no additional chargeto all authorized dealers.
Support: Login Screen
00 Series Service Guide
December 2013
Page 84
Division providesand is only available for Canon
Systems Engineers andTechnicians access to technical support information via the Worldwide
The following functions and information can be accessed:
Proactive notification of new releases, patches, TechnicalmessageIntegrated Knowledge
natural language query
Support, you must first register for an e-Support ID, go to the Canon
Web site atRegister” button, and
This service is available at no additional charge
imageRUNNER ADVANCE 6200 Series Service Guide
Revision 1
b. Canon USA
Complete Service GuideISG Central
Access is limited tocontact your Dealer Administrator to request access to theServices and Solutions
Figure 21 – ISG Central: Login Screen
When an endselect the “Service Guides area of the
Figure 22 – ISG Central:
imageRUNNER ADVANCE 6200 Series Service Guide
200 Series Service Guide
non USA’s ISG Central Web Site
Complete Service Guide versions are available on theISG Central Web site (http://isgcentral.cusa.canon.com).
Access is limited to an Authorized Dealer’s Managementontact your Dealer Administrator to request access to the
Services and Solutions section of ISG Central.
ISG Central: Login Screen
end-user logs on to the ISG Central Web site, he/s“Engineering Services & Solutions” button to access the
Service Guides area of the Web site, as shown below.
ISG Central: Engineering Services & Solutions Division
00 Series Service Guide
December 2013
Page 85
available on the Canon USA’s).
Authorized Dealer’s Management staff. Pleaseontact your Dealer Administrator to request access to the Engineering
Web site, he/she mustbutton to access the
Engineering Services & Solutions Division Web Page
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 86
Figure 23 – ISG Central: Engineering Services and Solutions Service Guides Area
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 87
X. Appendix
A. Registered Paper Type and Weight
Table 40 – Registered Paper Types and Weight
Paper Type Paper Weight
Thin 14 to 16 lb bond (52 to 63 g/m2)
Plain 1 17 to 24 lb bond (64 to 90 g/m2)
Recycled 17 to 24 lb bond (64 to 90 g/m2)
Color 17 to 24 lb bond) (64 to 90 g/m2)
Heavy 1 25 lb bond to 66 lb cover (91 to 180 g/m2)
Heavy 2 67 to 80 lb cover (181 to 220 g/m2)
Heavy 3 82 lb cover to 140 lb index (221 to 256 g/m2)
1-Sided Coated 1 29 lb bond to 66 lb cover (106 to 180 g/m2)
1-Sided Coated 2 67 to 80 lb cover (181 to 220 g/m2)
2-Sided Coated 1 29 lb bond to 66 lb cover (106 to 180 g/m2)
2-Sided Coated 2 67 to 80 lb cover (181 to 220 g/m2)
Tracing 17 to 24 lb bond (64 to 90 g/m2)
Transparency 40 lb bond to 66 lb cover (151 to 180 g/m2)
Pre-Punched 17 lb bond to 24 lb bond (64 to 90 g/m2)
bond 24 lb bond (90 g/m2)
Tab Paper 56 lb cover to 80 lb cover (151 to 220 g/m2)
Labels 56 lb cover to 66 lb cover (151 to 180 g/m2)
Letterhead 56 lb cover to 66 lb cover (151 to 180 g/m2)
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 88
B. Specifications
Note: All specifications are for reference purposes only and are subject tochange without notice.
Table 41 – ImageRUNNER ADVANCE 6200 Series Specifications
Item
Specification
imageRUNNER ADVANCE
6275 6265 6255
Type Digital Multifunction Imaging System
Copy Method Laser Dry Electrostatic Transfer
Developing System Dry Mono Component Toner Projection
Fixing System Induction Heating Technology
Maximum Original Size 11" × 17"
Maximum Copy/Print Size 11 3/4" × 19 1/4"
Minimum Copy Size 4" x 5 7/8"
Memory Standard 1.5 GB RAM, Maximum 2 GB RAM
Hard Disk DriveStandard: 160 GB Hard Disk Drive
Maximum (Optional): 1 TB Hard Disk Drive
StandardInterfaces
Network
HardwareEthernet 10/100 Base-TX, Ethernet 1000 Base-TX
Wireless LAN (IEEE 802.1x via Optional 3rd
party adapter)
Software(ProtocolsSupported)
TCP/IPFrame Type: Ethernet II
Print Applications: LPD / Raw / IPP / IPPS / FTP / WSD
IPX/SPX
Frame Type: Ethernet II / Ethernet 802.2 / Ethernet 802.3 / Ethernet SNAP/ Auto Detect
Print Applications: Bindery PServer / NDS PServer / RPrinter / NPrinter
AppleTalkFrame Type: Ethernet SNAP
Print Applications: PAP (Printer Access Protocol)
Others
USB 2.0 ×2 (Host), USB 2.0 (Device),USB 2.0 ×2 (w/Optional Device Port),
SD Card, SDHC Card, Compact Flash, Memory Stick, Microdrive(w/Optional Multimedia Reader/Writer)
Copy / Print Speed57
11” x 17” 37 32 32
LGL 45 39 39
LTR 75 65 55
LTRR 58 50 43
EXEC 75 65 55
STMTR 35 35 35
FCOT (Approximately) Up to 3.1 seconds Up to 3.3 seconds
Warm Up Time(at room temp.of 20ºC)
From Power On Approximately 30 seconds
From Sleep Mode Approximately 30 seconds
Quick Startup ModeApproximately 7 seconds
4
(Approximately 10 seconds when equipped with 1TB HDD)
From Energy Saver Mode Approximately 20 seconds
4 If "Quick Startup Settings for Main Power" is set to On, it takes 7 seconds until the key operation on the touch panel display isavailable after turning ON the main power.
57 Except when paper is fed from the Multi-Purpose Tray. Printing performance may not be optimal, depending on the original contentand combination of settings. To give priority to the copy speed, select [Text] for [Original Type].
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 89
Table 41 – ImageRUNNER ADVANCE 6200 Series Specifications Continued
Item
Specification
imageRUNNER ADVANCE
6275 6265 6255
Engine Resolution Up to 1,200 × 1,200 dpi
Halftone 256 Gradations
Paper Capacity(20 lb bond)
StandardTwo Paper Drawers: Up to 1,500 sheets eachTwo Paper Cassettes: Up to 550 sheets each
Multi-Purpose Tray: Up to 100 sheets
OptionalPaper Deck Unit-A1 or Paper Deck Unit-D1
Up to 3,500 sheet paper deck
Maximum Up to 7,700 sheets
Paper Size
Paper Drawer 1, 2(Left & Right)
LTR
Paper Cassette 3, 4(Lower)
11"×17", LGL, LTR, LTRR, EXEC, STMTR, Custom Size(5 1/2" x 7 1/8"to 11 3/4" x 19 1/4" (139.7 x 182 mm to 297 mm x 487.7 mm))
Multi-Purpose Tray11"×17", LGL, LTR, LTRR, EXEC, STMTR, Custom Size (4" x 5 7/8" to 11
3/4" x 19 1/4" (100 mm x 148 mm to 297 mm x 487.7 mm))
Paper Weight
Paper Drawer 1, 2(Left & Right)
14 lb bond - 80 lb cover (52 g/m2
- 220 g/m2)
Paper Cassette 3, 4(Lower)
Multi-Purpose Tray 14 lb bond - 140 lb index (52 g/m2
- 256 g/m2)
Paper Type58
Paper Drawer 1, 2(Left & Right)
Thin, Plain, Heavy 1, Heavy 2, Color, Recycled, Pre-Punched, bond,Letterhead
Paper Cassette 3, 4(Lower)
Thin, Plain, Heavy 1, Heavy 2, Color, Recycled, Pre-Punched, Tab, bond,Letterhead
Multi-Purpose TrayThin, Plain, Heavy 1, Heavy 2, Heavy 3, Color, Recycled, Pre-Punched,
Transparency, Tracing, Labels, bond, Letterhead
Duplexing Standard Automatic Trayless Duplexing
Dimensions (H×W×D)
Without the upright control panel:48" x 25 3/8" x 30 3/8" (1,220 mm x 645 mm x 770 mm)
With the upright control panel59
:49 1/4" x 58 3/8" x 30 3/8" (1,252 mm x 1,481 mm x 770 mm)
Weight(Main unit, DADF and Consumables)
Approximately 516 lb (234 kg)
Installation Space (W×D)
Without the upright control panel:Approximately 53 5/8" x 30 3/8" (1,362 mm x 770 mm)
With the upright control panel59
:Approximately 74 7/8" x 30 3/8" (1,901 mm x 770 mm)
(when the Copy Tray-Q1 is attached, and the multi-purpose tray andauxiliary tray are extended.)
Power Requirement 120V AC / 60Hz / 20A
Plug NEMA 5-20P
PowerConsumption
60
Maximum 1.92 kW or less
Sleep Mode (Low) 0.9 W or less
Energy Saver Mode 245 Wh or less (-10% is selected)
Main Power SwitchSet to OFF
Quick Startup Settings for Main Power set to “Off”: 0.3 W
Quick Startup Settings for Main Power set to “On”: 0.45 W
4 If "Quick Startup Settings for Main Power" is set to On, it takes 7 seconds until the key operation on the touch panel display isavailable after turning ON the main power.
58 Reference Registered Paper Type and Weight for the available paperweights.59 To the right edge of the upright control panel in the rightmost position.60 Power consumption may vary, depending on the environment and conditions under which the machine is used.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 90
Table 42 – Duplex Color Image Reader Unit-G1
Duplex Color Image Reader Unit-G1
Item Specification
Resolution for Reading up to 600 × 600dpi
Number of Tones 256
Original Feeding Mechanism Single Pass Duplex Automatic Document Feeder
Original Paper Capacity 300 sheets (20 lb bond (80 g/m2))
Paper Weight of Originals
1 – Sided Scanning:B&W or Color Original 13 lb bond to 80 lb cover (50 to 220 g/m
2)
2 – Sided Scanning:B&W Original: 13 lb bond to 80 lb cover (50 to 220 g/m
2)
Color Original: 17 lb bond to 80 lb cover (64 to 220 g/m2)
Size of Originals 11" x 17", LGL, LTR, LTRR, STMT, STMTR
Acceptable Originals Sheet, book, three dimensional objects (up to 4.4 lb (2kg))
Original Scan Speed Simplex Duplex
(Letter) Scan @ 300 dpi 120 (B&W) / 85 (Color) ipm 200 (B&W) / 100 (Color) ipm
Copy2
@ 600 dpi 120 (B&W) /51 (Color) ipm 120 (B&W) / 51 (Color) ipm
Magnification
Regular paper size: Same Ratio1:1
Reduction1:0.78 (LGL ➞ LTR)
1:0.73 (11" x 17" ➞ LGL, 11" x 15" ➞ LTR)
1:0.64 (11" x 17" ➞ LTR)
1:0.50 (11" x 17" ➞ STMT)1:0.25
Enlargement1:1.21 (LGL ➞11" x 17")
1:1.29 (LTR ➞ 11" x 17")
1:2.00 (STMT ➞ 11" x 17")1:4.00
Copy Ratio: 25 to 400% (in 1% increments)
Power Source/ Consumption From the main unit: Approximately 185 W
Dimensions (H x W x D) Approximately 10” x 25” x 23 7/8” (253 mm x 635 mm x 605 mm)
Weight Approximately 87.1 lb (39.5 kg)
2 Requires the optional Additional Memory Type-D (512 MB).
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 91
Table 43 – Paper Deck Unit-A1
Paper Deck Unit-A1
Item Specification
Paper Sizes LTR
Paper Weight 14 lb bond to 80 lb cover (52 to 220 g/m2)
Paper Types58
Thin, Plain, Heavy 1, Heavy 2, Color, Recycled, Pre-Punched
Paper Deck Capacity Up to 3,500 sheets (20 lb bond (80 g/m2))
Power Requirement From main unit
Maximum Power Consumption Approximately 39 W
Dimensions (H×W×D) Approximately 22 1/2" x 12 3/4" x 23" (570 mm x 323 mm x 583 mm)
Weight Approximately 81.6 lb (37 kg)
Installation Space (W×D)
Without the upright control panel:Approximately 54 7/8" x 30 3/8" (1,393 mm x 770 mm)
With the upright control panel59
:Approximately 74 7/8" x 30 3/8" (1,901 mm x 770 mm)
(when the Copy Tray-Q1 is attached, and the auxiliary tray is extended.)58 Reference Registered Paper Type and Weight for the available paperweights.59 To the right edge of the upright control panel in the rightmost position.
Table 44 – Paper Deck Unit-D1
Paper Deck Unit-D1
Item Specification
Paper Sizes 11"×17", LGL, LTR, LTRR
Paper Weight 14 lb bond to 80 lb cover (52 to 220 g/m2)
Paper Types58
Thin, Plain, Heavy 1, Heavy 2, Color, Recycled, Bond, Pre-Punched
Paper Capacity Up to 3,500 sheets (20 lb bond (80 g/m2))
Power Requirement From main unit
Maximum Power Consumption Less than 39 W
Dimensions (H×W×D) Approximately 22 1/2" x 23 5/8" x 24 1/2" (570 mm x 601 mm x 621 mm)
Weight Approximately 125.7 lb (57 kg)
Installation Space (W×D)
Approximately 65 3/4" x 30 3/8" (1,671 mm x 770 mm)With the upright control panel
59:
Approximately 74 7/8" x 30 3/8" (1,901 mm x 770 mm)(when the Copy Tray-Q1 is attached, and the auxiliary tray is extended.)
58 Reference Registered Paper Type and Weight for the available paperweights.59 To the right edge of the upright control panel in the rightmost position.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 92
Table 45 – Document Insertion Unit-L1
Document Insertion Unit-L1
Item Specification
Paper Sizes 11"×17", LGL, LTR, LTRR, EXEC
Paper Weight 16 lb bond to 140 lb index (60 to 256 g/m2)
Paper Types58 Thin, Plain, Heavy 1, Heavy 2, Heavy 3, Color, Recycled, Tab, Bond,
Letterhead, Coated61
Number of Trays 1
Paper Capacity Up to 100 sheets (20 lb bond (80 g/m2))
Power Requirement 100-240V AC, 50/60Hz, 5.0A
Maximum Power Consumption Approximately 84 W
Plug 120V, 60Hz, 15A / NEMA 5-15P
Dimensions (H×W×D) Approximately 48 7/8" x 26 1/8" x 26 3/4" (1,242 mm x 662 mm x 679 mm)
Weight Approximately 88.2 lb (40 kg )
Installation Space (W×D)
Without the upright control panel:Approximately 77 1/8" x 30 3/8" (1,960 mm x 770 mm)
With the upright control panel59
:Approximately 98 3/8" x 30 3/8" 2,499 mm x 770 mm
(when the Booklet Finisher-P1 is attached, and the multi-purpose tray and theauxiliary tray are extended.)
58 Reference Registered Paper Type and Weight for the available paperweights.59 To the right edge of the upright control panel in the rightmost position.
Table 46 – Document Insertion / Folding Unit-H1
Document Insertion / Folding Unit-H1
Item Specification
C-FoldPaper Size LTRR
Paper Weight 16 lb bond to 28 lb bond (60 to 105 g/m2)
Z-FoldPaper Size 11" x 17", LGL,LTRR
Paper Weight 16 lb bond to 28 lb bond (60 to 105 g/m2)
Paper Type58
Thin, Plain, Color, Recycled
Paper Capacity C-Fold: Up to 40 sheets (20 lb bond (80 g/m2)) or 60 mm in height
DocumentInsertion Unit
Paper Sizes 11"×17", LGL, LTR, LTRR, EXEC
Paper Weight 16 lb bond to 140 lb index (60 to 256 g/m2)
Paper TypesThin, Plain, Heavy 1, Heavy 2, Heavy 3, Color, Recycled, Tab, bond,
Letterhead, Coated61
Paper Capacity Up to 100 sheets (20 lb bond (80 g/m2))
Power Requirement / MaximumPower Consumption
100-240V AC, 50/60Hz, 1.0A / Approximately 170 W
Plug 120V, 60Hz, 15A / NEMA 5-15P
Dimensions (H×W×D) Approximately 48 7/8" x 26 1/8" x 26 3/4" (1,242 mm x 662 mm x 679 mm)
Weight Approximately 168 lb ( 76 kg )
Installation Space (W×D)
Without the upright control panel:Approximately 77 1/8" x 30 3/8" (1,960 mm x 770 mm)
With the upright control panel59
:Approximately 98 3/8" x 30 3/8" 2,499 mm x 770 mm
(when the Booklet Finisher-P1 is attached, and the multi-purpose tray and theauxiliary tray are extended.)
58 Reference Registered Paper Type and Weight for the available paperweights.59 To the right edge of the upright control panel in the rightmost position.
61 Coated paper can be loaded from the Document Insertion Unit only.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 93
Table 47 – Staple Finisher-P1
Staple Finisher-P1
Item Specification
Number of Trays 3
Paper Sizes11"×17", LGL, LTR, LTRR, EXEC, STMTR, Custom Size (4" x 5 7/8" to 11 3/4" x
19 1/4" (100 mm x 148 mm to 297 mm x 487.7 mm))
Paper Weight 14 lb bond - 140 lb index (52 g/m2
- 256 g/m2)
Paper Types58 Thin, Plain, Heavy 1, Heavy 2, Heavy 3, Color, Recycled, Pre-Punched,
Transparency, Tracing, Labels, Tab, Bond, Letterhead
PaperCapacity
Tray ALTR, STMTR, EXEC : Up to 250 sheets (or 1 3/4” (43 mm) in height)11” x 17”, LGL, LTRR : Up to 125 sheets (or 7/8” (21 mm) in height)
No CollatingMode
Tray BLTR, STMTR, EXEC : Up to 1,300 sheets (or 7 3/8” (188 mm) in height)
62
11” x 17”, LGL, LTRR : Up to 650 sheets (or 3 3/4” (96 mm) in height)
Tray CLTR : Up to 2,450 sheets (or 13 5/8” (347 mm) in height)
62
STMTR, EXEC : Up to 1,700 sheets (or 13 5/8” (347 mm) in height)11” x 17”, LGL, LTRR : Up to 650 sheets (or 3 3/4” (96 mm) in height)
Collating /Group Mode
Tray BLTR, EXEC : Up to 1,300 sheets (or 7 3/8” (188 mm) in height)
62
11” x 17”, LGL, LTRR : Up to 650 sheets (or 3 3/4” (96 mm) in height)
Tray CLTR, EXEC : Up to 1,700 sheets (or 9 5/8” (243 mm) in height)
62
11” x 17”, LGL, LTRR : Up to 650 sheets (or 3 3/4” (96 mm) in height)
Staple Mode(20 lb bond)
TrayB / C
LTR, EXEC : Up to 1,300 sheets / 100 sets (7 3/8” or (188 mm) in height)62
11” x 17”, LGL, LTRR : Up to 650 sheets / 50 sets (3 3/4” or (96 mm) in height)
Z-Fold ModeTrayB / C
11” x 17”: Up to 30 sheets, 10 sheets per set when staplingLGL, LTRR: Up to 10 sheets
Maximum Stapling CapacityLTR, EXEC: Up to 50 sheets
11" x 17", LGL, LTRR: Up to 30 sheets
Type of Staple / SizeCorner: 11" x 17", LGL, LTR, LTRR, EXECDouble: 11" x 17", LGL, LTR, LTRR, EXEC
Power Source / Maximum PowerConsumption
From the main unit/Approximately 136 W
Approximately 147 W (including the External 2/3 Hole Puncher-A1
Dimensions (H×W×D)Approximately 44 1/8" x 25 5/8" x 25 7/8" (1,121 mm x 649 mm x 656 mm)
When the auxiliary tray is extended:Approximately 44 1/8" x 30") x 25 7/8" (1,121 mm x 761 mm x 656 mm)
Weight 106 lb (48 kg)
Installation Space (W×D)
Without the upright control panel:Approximately 67 1/4" x 30 3/8" (1,708 mm x 770 mm)
With the upright control panel59
:Approximately 88 1/2" x 30 3/8" 2,247 mm x 770 mm
(when the multi-purpose tray and the auxiliary tray are extended.)58 Reference Registered Paper Type and Weight for the available paperweights.59 To the right edge of the upright control panel in the rightmost position.
62 Up to 650 sheets (or 3 3/4" (96 mm) in height) when thin paper or custom paper lighter than 16 lb bond (59 g/m2) is selected.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 94
Table 48 – Booklet Finisher-P1
Booklet Finisher-P1
Item Specification
Number of Trays 3
Paper Sizes11"×17", LGL, LTR, LTRR, EXEC, STMTR, Custom Size (4" x 5 7/8" to 11 3/4" x
19 1/4" (100 mm x 148 mm to 297 mm x 487.7 mm))
Paper Weight 14 lb bond - 140 lb index (52 g/m2
- 256 g/m2)
Paper Types58 Thin, Plain, Heavy 1, Heavy 2, Heavy 3, Color, Recycled, Pre-Punched,
Transparency, Tracing, Labels, Tab, bond, Letterhead
PaperCapacity
Tray ALTR, STMTR, EXEC : Up to 250 sheets (or 1 3/4” (43 mm) in height)11” x 17”, LGL, LTRR : Up to 125 sheets (or 7/8” (21 mm) in height)
No CollatingMode
Tray BLTR, STMTR, EXEC : Up to 1,300 sheets (or 7 3/8” (188 mm) in height)
62
11” x 17”, LGL, LTRR : Up to 650 sheets (or 3 3/4” (96 mm) in height)
Tray CLTR : Up to 2,450 sheets (or 13 5/8” (347 mm) in height)
62
STMTR, EXEC : Up to 1,700 sheets (or 13 5/8” (347 mm) in height)11” x 17”, LGL, LTRR : Up to 650 sheets (or 3 3/4” (96 mm) in height)
Collating /Group Mode
Tray BLTR, EXEC : Up to 1,300 sheets (or 7 3/8” (188 mm) in height)
62
11” x 17”, LGL, LTRR : Up to 650 sheets (or 3 3/4” (96 mm) in height)
Tray CLTR, EXEC : Up to 1,700 sheets (or 9 5/8” (243 mm) in height)
62
11” x 17”, LGL, LTRR : Up to 650 sheets (or 3 3/4” (96 mm) in height)
Staple Mode(20 lb bond)
TrayB / C
LTR, EXEC : Up to 1,300 sheets / 100 sets (7 3/8” or (188 mm) in height)62
11” x 17”, LGL, LTRR : Up to 650 sheets / 50 sets (3 3/4” or (96 mm) in height)
Z-Fold ModeTrayB / C
11” x 17”: Up to 30 sheets, 10 sheets per set when staplingLGL, LTRR: Up to 10 sheets
Saddle Stitch ModeUp to 1 to 5 sheets / 25 sets
Up to 6 to 10 sheets / 15 setsUp to 11 to 16 sheets / 10 sets
Maximum Stapling CapacityLTR, EXEC: Up to 50 sheets
11" x 17", LGL, LTRR: Up to 30 sheets
Type of Staple / SizeCorner: 11" x 17", LGL, LTR, LTRR, EXECDouble: 11" x 17", LGL, LTR, LTRR, EXEC
AvailableSaddle StitchCapacity/Size
Saddle StitchUp to 16 sheets (including 1 cover sheet up to 140 lb index (256 g/m
2)) (20 lb
bond (80 g/m2))
Saddle Folding 1 Sheet (16 lb bond to 140 lb index (60 g/m2to 256 g/m
2))
Size 11" x 17", LGL, LTRR
cover Weight Required the paper weight of the main document or more.
Power Source / Maximum PowerConsumption
From the main unit/Approximately 143 W
Approximately 155 W (including the External 2/3 Hole Puncher-A1
Dimensions (H×W×D)Approximately 44 1/8" x 25 5/8" x 25 7/8" (1,121 mm x 649 mm x 656 mm)
When the auxiliary tray is extended:Approximately 44 1/8" x 30") x 25 7/8" (1,121 mm x 761 mm x 656 mm)
Weight 159 lb (72 kg)
Installation Space (W×D)
Without the upright control panel:Approximately 67 1/4" x 30 3/8" (1,708 mm x 770 mm)
With the upright control panel59
:Approximately 88 1/2" x 30 3/8" 2,247 mm x 770 mm
(when the multi-purpose tray and the auxiliary tray are extended.)58 Reference Registered Paper Type and Weight for the available paperweights.59 To the right edge of the upright control panel in the rightmost position.62 Up to 650 sheets (or 3 3/4" (96 mm) in height) when thin paper or custom paper lighter than 16 lb bond (59 g/m2) is selected.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 95
Table 49 – External 2/3 Hole Puncher-A1
External 2/3 Hole Puncher-A1
Item Specification
Paper Sizes3 Holes 11"x17", LTR
2 Holes LGL, LTRR
Paper Weight 14 lb bond to 140 lb index (52 to 256 g/m2)
Paper Type58
Thin, Plain, Heavy 1, Heavy 2, Heavy 3, Color, Recycled, Tab, bond, Coated61
Punch Hole Quantity,Hole Diameter
3 Holes 1/4” (8 mm)
2 Holes 3/8” (6.5 mm)
Distance betweenPunch Holes
3 Holes 4 1/4” (108 mm)
2 Holes 2 3/4” (80 mm)
Punch Waste Tray Capacity Approximately 10,000 sheets ( 20 lb bond (80 g/m2))
Power Requirement From the main unit
Dimensions (H×W×D) Approximately 32 1/2" x 4 1/4" x 24 1/4" (825 mm x 107 mm x 615 mm)
Weight Approximately 17 lb (7.7 kg)
Installation Space (W×D)
Without the upright control panel:Approximately 71 1/8" x 30 3/8" ( 1,807 mm x 770 mm )
With the upright control panel59
:Approximately 92 7/8" x 30 3/8" (2,359 mm x 770 mm)
(when the Booklet Finisher-P1 is attached, and the multi-purpose tray and theauxiliary tray are extended.)
58 Reference Registered Paper Type and Weight for the available paperweights.59 To the right edge of the upright control panel in the rightmost position.
Table 50 – Copy Tray-Q1
Copy Tray-Q1
Item Specification
Paper Sizes11"×17", LGL, LTR, LTRR, EXEC, STMTR, Custom Size (4" x 5 7/8" to 11 3/4" x
19 1/4" (100 mm x 148 mm to 297 mm x 487.7 mm))
Paper Weight 14 lb bond - 140 lb index (52 g/m2
- 256 g/m2)
Paper Type58 Thin, Plain, Heavy 1, Heavy 2, Heavy 3, Color, Recycled, Pre-Punched,
Transparency, Tracing, Labels, Tab, bond, Letterhead
Paper Capacity Up to 250 Sheets ( 20 lb bond (80 g/m2)
Dimensions (H×W×D) Approximately 6 7/8" x 16 1/2" x 15" (175 mm x 420 mm x 382 mm)
Weight Approximately 2.4 lb (1.1 kg)
Installation Space (W×D)
Without the upright control panel:Approximately 55 5/8" x 30 3/8" ( 1,362 mm x 770 mm )
With the upright control panel59
:Approximately 74 7/8" x 30 3/8" (1,901 mm x 770 mm)
(when the multi-purpose tray and the auxiliary tray are extended.)58 Reference Registered Paper Type and Weight for the available paperweights.59 To the right edge of the upright control panel in the rightmost position.
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 96
Table 51 – Copy Card Reader-F1
Copy Card Reader-F1
Item Specification
Available Cards Magnetic
Card Readout Method Magnetic readout
Card Reading Direction Inserting Direction
Store/Replay Replay
Power Source From the main unit
Dimensions (H x W x D) Approximately 1 5/8" x 3 1/2" x 3 3/4" (40 mm x 88 mm x 96 mm)
Weight Approximately 7.1 oz (200 g)
Table 52 – Super G3 Fax Board-AL1
Super G3 Fax Board-AL1
Item Specifications
Telephone Line Used63
Public Switched Telephone Network
Scan line Density (Scan,Transmission)
Normal: 8 pels 64/mm x 3.85 line/mmFine: 8 pels/mm x 7.7 line/mm
Super-Fine: 8 pels/mm x 15.4 line/mmUltra-Fine: 16 pels/mm x 15.4 line/mm
Transmission Speed Super G3: 33.6 kbps, G3: 14.4 kbps
Compression Method MH, MR, MMR, JBIG
Transmission Type Super G3, G3
Sending Original Sizes 11” x 17” to STMTR
Receiving Paper Sizes 11” x 17” to STMTR
Transmission Times JBIG: Approximately 2.6 seconds
Auto Dial FunctionAddress Book: 1,800 destinations (including destinations stored in one-touch
buttons)
Image Memory Approximately 20,000 pages
63 When using an IP telephone service, facsimile communication may not be performed normally via an IP telephone line. It isrecommended to use facsimile communication via a general telephone (Public Switched Telephone Network) line.
64 Pels stands for picture elements (pixels)
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 97
Table 53 – Universal Send Scan Specifications
Universal Send Scan
Item Specifications
Communication Protocol FTP (TCP/IP), SMB (TCP/IP), WebDAV
Data Format TIFF, JPEG, PDF, XPS, OOXML (PowerPoint)
Resolution100 x 100 dpi, 150 x 150 dpi, 200 x 100 dpi, 200 x 200 dpi, 200 x 400 dpi,300 x 300 dpi, 400 x 400 dpi, 600 x 600 dpi
System EnvironmentWindows 2000 Server SP4, Windows XP Professional SP3, Windows Server 2003 R2SP2, Windows Vista SP2, Windows Server 2008 SP2, Windows Server 2008 R2 SP2,Windows 7, Solaris 10, Mac OS X 10.4.x/10.5.x/10.6.x, RedhatLinux 9
Interface 1000BASE-T, 100BASE-TX, 10BASE-T
Color ModeAutomatic-Color Select (Full Color/Grayscale), Automatic-Color Select (FullColor/B&W), Full Color, Grayscale, B&W
Original Type Text, Text/Photo, Photo
Others Preview, Browse Windows (SMB) File Server
OptionalPDF/XPS/OOXMLFunctions
PDFCompact, Trace and Smooth, Encryption, OCR, Device Signature, UserSignature, Optimization for Web
65, PDF/A-1b, Reader Extensions, Policy
Applied
XPS Compact, OCR, Device Signature, User Signature
OOXML PowerPoint, OCR
Table 54 – Universal Send E-Mail and I-Fax Specifications
Universal Send E-Mail and I-Fax
Item Specifications
Communication Protocol SMTP, POP3
I-Fax CommunicationMode
Simple, Full
ResolutionFor Sending E-mail
100 x 100 dpi, 150 x 150 dpi, 200 x 100 dpi, 200 x 200 dpi,200 x 400 dpi, 300 x 300 dpi, 400 x 400 dpi, 600 x 600 dpi
For Sending I-Fax(B&W)
200 x 100 dpi, 200 x 200 dpi, 200 x 400 dpi66
, 300 x 300 dpi66
,400 x 400 dpi
66, 600 x 600 dpi
66
FormatE-mail TIFF, JPEG, PDF, XPS, OOXML (PowerPoint)
I-Fax (B&W) TIFF (MH, MR66
, MMR66
)
Original SizeE-mail 11” x 17”, LGL, LTR, LTRR, STMT, STMTR
I-Fax 11” x 17”, LGL67
, LTR, LTRR, STMT67
, STMTR67
Server SoftwareMicrosoft Exchange 2003 SP2, Microsoft Exchange 2007 SP2, Sendmail 8.14.4, LotusDomino R7.0
Other Searches a destination via the LDAP Server, Preview
Optional PDF/XPSFunctions
PDFCompact, Trace and Smooth, Encryption, OCR, Device Signature, UserSignature, Optimization for Web*3
68, PDF/A-1b, Reader Extensions, Policy
Applied
E-mail onlyXPS Compact, OCR, Device Signature, User Signature
OOXML PowerPoint, OCR
65 PDF files optimized for Web viewing.66 Available after setting RX conditions of the destination.67 Sent as LTR68 PDF Files Optimized for Web viewing
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 98
Table 55 – ImagePASS-U2
imagePASS-U2
Item Specification
Type External Print Controller
Supported Devices imageRUNNER ADVANCE 6275 / 6265 / 6255
OS Windows7 Professional FES
CPU Intel Pentium dual core E5300 2.6 GHz
Memory(Standard / Maximum)
2 GB
Hard Disk Drive 250 GB
System Fiery System10
Print Drivers
Windows XP/Server 2003/Server 2008/Server 2008 R2/Server 2008 R2 SP1/Vista/7/7SP1
Macintosh OS X 10.4.11 to 10.7.x (Macintosh OS X 10.8.x supported in a futurerelease.)
Standard Items
Hot Folders Version 3 Secure Erase Version 1.1 Paper Catalog Kit VDP-A1 Kit Virtual Printers
Options
SeeQuence Suite SeeQuence Impose SeeQuence Compose ImageViewer Removable Hard Disk Drive Integrated Interface & Stand
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 99
C. Warranty
1. Main Unit Limited Warranty
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 100
2. GPR-37/38 Drum Unit Limited Warranty
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 101
D. List of Tables
Table 1 – imageRUNNER ADVANCE 6200 Series Comparison................................................ 3Table 2 – Configuration............................................................................................................... 6Table 3 – Hardware Accessories ................................................................................................ 7Table 4 – System Accessories.................................................................................................... 8Table 5 – System Connectivity Accessories ............................................................................... 9Table 6 – Supplies and Consumables ........................................................................................ 9Table 7 – Drum and Toner ........................................................................................................10Table 8 – imageRUNNER ADVANCE Solutions.......................................................................10Table 9 – Online Modules .........................................................................................................37Table 10 – Classroom Courses.................................................................................................38Table 11 – Prerequisite Courses...............................................................................................38Table 12 – Update Courses ......................................................................................................38Table 13 – Service Materials.....................................................................................................39Table 14 – Power and Receptacle Requirements for Main Unit and Accessories ...................40Table 15 – Power and Receptacle Requirements for Controllers.............................................40Table 16 – Approximate Weight................................................................................................42Table 17 – Dimensions .............................................................................................................42Table 18 – Dimensions Diagram...............................................................................................43Table 19 – Minimum Configuration Installation Space Requirements ......................................44Table 20 – Maximum Configuration Installation Space Requirements .....................................45Table 21 – Estimated Installation Times ...................................................................................46Table 22 – CDS Firmware Delivery Methods............................................................................50Table 23 – Special Tools List ....................................................................................................57Table 24 – Solvents and Oils ....................................................................................................58Table 25 – Main Unit Consumables List ...................................................................................59Table 26 – Main Unit Consumable Parts List............................................................................60Table 27 – Duplex Color Image Reader Unit-G1 Consumable Parts List.................................61Table 28 – Paper Deck Unit-A1 / Paper Deck Unit-D1 Consumable Parts List........................62Table 29 – Booklet Finisher-P1 / Staple Finisher-P1 Consumable Parts .................................62Table 30 – Document Insertion Unit-L1 Consumable Parts .....................................................62Table 31 – Document Insertion / Folding Unit-H1 Consumable Parts ......................................63Table 32 – Periodic Replacement Parts ...................................................................................63Table 33 – Main Unit Periodic Maintenance .............................................................................64Table 34 – Soft Counter Configuration .....................................................................................68Table 35 – Monthly Copy/Print Volume ....................................................................................69Table 36 – Monthly Print Copy Volume Definitions...................................................................69Table 37 – GPR-37/38 Drum Unit Limited Warranty.................................................................70Table 38 – Authorized Part Repair Facilities.............................................................................72Table 39 – Canon USA Support Escalation Flow Chart ...........................................................80Table 40 – Registered Paper Types and Weight ......................................................................87Table 41 – ImageRUNNER ADVANCE 6200 Series Specifications.........................................88Table 42 – Duplex Color Image Reader Unit-G1 ......................................................................90Table 43 – Paper Deck Unit-A1 ................................................................................................91Table 44 – Paper Deck Unit-D1 ................................................................................................91Table 45 – Document Insertion Unit-L1 ....................................................................................92Table 46 – Document Insertion / Folding Unit-H1.....................................................................92Table 47 – Staple Finisher-P1...................................................................................................93Table 48 – Booklet Finisher-P1.................................................................................................94Table 49 – External 2/3 Hole Puncher-A1 ................................................................................95Table 50 – Copy Tray-Q1..........................................................................................................95Table 51 – Copy Card Reader-F1.............................................................................................96Table 52 – Super G3 Fax Board-AL1 .......................................................................................96Table 53 – Universal Send Scan Specifications .......................................................................97Table 54 – Universal Send E-Mail and I-Fax Specifications.....................................................97Table 55 – ImagePASS-U2.......................................................................................................98
imageRUNNER ADVANCE 6200 Series Service Guide
imageRUNNER ADVANCE 6200 Series Service Guide December 2013
Revision 1 Page 102
E. List of Figures
Figure 1 – Learning Path for Service Technicians not certified on the imageRUNNER ADVANCE8000/6000 Series ......................................................................................................................36Figure 2 – Learning Path for Certified imageRUNNER ADVANCE 8000/6000 Series Technicians..................................................................................................................................................36Figure 3 – Power and Receptacle Requirements .....................................................................41Figure 4 – Hardware Configuration Chart .................................................................................41Figure 5 – License Management System .................................................................................54Figure 6 – Content Delivery System Web Site..........................................................................55Figure 7 – e-Support: Flat-Rate Program .................................................................................71Figure 8 – e-Support: Authorized Parts Repair Facilities..........................................................72Figure 9 – e-Support: e-Tag......................................................................................................73Figure 10 – e-Support: e-Tag Claim Console ...........................................................................74Figure 11 – ISG Central ............................................................................................................75Figure 12 – CNA: Warranty Credit Inquiry ................................................................................76Figure 13 – CNA: e-Tag Warranty Claims Search....................................................................76Figure 14 – ISG Central ............................................................................................................77Figure 15 – CNA: Warranty Credit Inquiry ................................................................................77Figure 16 - CNA: Flat-Rate Warranty Reimbursement Search.................................................77Figure 17 – NAVI: Login Screen ...............................................................................................81Figure 18 – NAVI: Main Screen ................................................................................................81Figure 19 – e-Support: NAVI’s Mini-Home Page ......................................................................83Figure 20 – e-Support: Login Screen........................................................................................84Figure 21 – ISG Central: Login Screen.....................................................................................85Figure 22 – ISG Central: Engineering Services & Solutions Division Web Page .....................85Figure 23 – ISG Central: Engineering Services and Solutions Service Guides Area...............86