Warehousing Saw Cutting Special Alloys, Sizes, and Shapes

BronzeCA 314 Commercial BronzeCA 510 Phosphor BronzeCA 544 Phosphor BronzeCA 630 Aluminum Bronze CA 863 Manganese BronzeCA 903 Tin BronzeCA 907 Gear BronzeCA 932 BronzeCA 954 Aluminum BronzeCA 955 Aluminum BronzeCA 95510 Heat Treated Ni. Aluminum

BronzeCA 959 Aluminum Bronze

Special and Aerospace AlloysCopper Beryllium C172 per AMS 4535 COND. AT AMS 4640 Aluminum BronzeAMS 4880 Ni. Aluminum BronzeToughMet® 3 COND. AT & CX

Special Alloys Available Upon RequestRefer to the Tables on the back of this page for our most commonly requested alloys.

Cast IronClass 40 Gray Iron65-45-12 Ductile Iron80-55-06 Ductile Iron

Morgan Bronze Products, Inc.340 East IL Route 22Lake Zurich, IL 60047

www.morganbronze.com

Tel: 847-526-6000Fax: 847-438-6600

Toll-Free: 800-445-9970

info@morganbronze.com

We Stock andManufacture Solutions

Unique challenges take custom solutions. With an extensive selection of difficult-to-find alloys and

the capability to cast unique shapes, Morgan specializes in the fast and accurate distribution of

critical components that provide exceptional performance in the most extreme environments.

Morgan is an ISO9001 and AS9100 registered corporation that stocks and

manufactures innovative turnkey solutions!

This data is a compilation from many sources and is for reference only.

Actual properties depend on many variables including the production process, specifications, size and cross section of the casting.

These figures are NOT GUARANTEED and cannot be used as a basis of acceptance or rejection of the material.CAUT

ION

Wrought Products

Copper Alloy UNS#

Product Description

Chemical Properties Mechanical Properties

Common UsesCu Sn Pb Zn Al Fe Ni Mn Si P Be AS

Tensile YieldElongation

Std.Temperksi/MPa ksi/MPa

C17200Copper Beryllium

Rem.0.2 max.

0.2-0.6*

0.2 max

1.8-2.0

161/1110 130/896 3%Used in Bearings for Aircraft Landing Gear, Bushings & Washers for Tri-Cone Drill Bits, Resistance Welding Applications.

C31400**Leaded Commercial Bronze

87.5-90.5

1.3-2.5

Rem. 0.1 0.7 55/379 50/345 14% H02Used for Electrical Plug Type, Wire and Cable Connectors, Nuts, Screws Pickling Fixtures, Crates and Racks.

C36000Free-Cutting Brass

60.0-63.0

2.5-3.0

Rem. 0.35 50/345 20/140 15% H02Used as Lock Bodies, Hardware, Fittings, Plumbing Components, Valve Parts, Pinions, Gears,and Screw Machine Parts.

C46400 Naval Brass59.0-62.0

.50-1.0

0.2 Rem. 0.1 75/517 53/365 20% H02Used as Bushings, Condensor Plates, Valve Stems, Heat Exchanger Tubes, Propeller Shafts and Marine Hardware.

C51000**Phosphor Bronze Rod, A

Rem.4.2-5.8

0.05 0.3 0.10.03-0.35

70/483 58/400 25% H02Used as Electrical Parts, Fasteners, Sleeve Bushings, Chemical Hardware, Clutch Disks and Welding Rods.

C54400**Phosphor Bronze Rod, B-2

Rem.3.5-4.5

3.0-4.0

1.5-4.5

0.10.01-0.5

68/469 57/393 20% H04Used as Electrical Connectors, Bushings, Gears, Pinions, Valve Parts and Shafts.

C61400Aluminum Bronze Plate

Rem. 0.01 0.26.0-8.0

1.5-3.5

1.0 0.015 78/538 45/310 40% H04Used as Condensor Tubes and Piping Systems, Tanks and Corrosion Resistant Vessels, Protective Sheathing and Marine Hardware.

C62400Aluminum Bronze 11%

Rem. 0.210.0-11.5

2.0-4.5

0.3 0.25 105/724 52/359 14% H02Used as Gears, Cams, Wear Plates, Bushings, Valve Balls, and Welding Wire.

C63000Nickel Aluminum Bronze

Rem.0.20 max.

.30 max.

9.0-11.0

2.0-4.0

4.0-5.5

1.5 max.

0.25 max.

110/760 68/470 10% HR50Used as Valve Stems, Valve Guides and Seats, Bushings, Gears, Cams, Ship Propellars, as well as Propellar Shafts and Nuts.

C64200Aluminum Silicon Bronze

Rem. 0.2 0.05 0.5 6.3-7.6 0.3 0.25 0.11.5-2.2

0.09 93/641 60/414 26% H04Used as Valve guides, Valve bodies, Valve Stems, Gears, Cams, Fasteners, and Marine Hardware.

C67300Manganese Bronze

58.0-63.0

0.30.4-3.0

Rem. 0.25 0.5 0.252.0-3.5

.5-1.5 65/448 40/276 11% H50Used as Fasteners, Sleeve and Thrust Bearings, Pump Parts, Propeller Shafts, Piston Heads, and Marine Hardware.

* Ni + Co = .2 min; Ni + Co + Fe = .06 max** Stock Alloys*** Stock Temper

Cast Products

Copper Alloy UNS#

Alloy FamilyProduct

Description

Chemical Properties Mechanical PropertiesCommon Uses

Cu Sn Pb Zn Ni Al Fe Mn Tensile Yield Elongation

C83600Leaded Red Brass

Red Brass 84-86 4.0-6.0 4.0-6.0 4.0-6.0 1.00 36 ksi 19 ksi 15%Used as valves, Pumps, Plumbing and Boat Hardware, Pipe Fittings and Terminal Ends for Electric Cables.

C84400Leaded Semi-Red Brass

81 Metal 78-82 2.3-3.5 6.0-8.0 7.0-10 1.00 0.40 30 ksi 15 ksi 16%Used as Low-Pressure Water Valves, Plumbing, Hardware, Pipe Fittings and Faucets.

C86200High Strength Yellow Brass

95000 Tensile Manganese Bronze

60-66 0.20 0.20 22-28 1.003.0-4.9

2.0-4.02.5-5.0

90 ksi 45 ksi 18% Used as struts, gears, valve stems, bushings, machine parts and marine castings.

C86300High Strength Yellow Brass

110000 Tensile Manganese Bronze

60-66 0.20 0.20 22-28 1.005.0-7.5

2.0-4.02.5-5.0

110 ksi 62 ksi 14% Used as heavy load bushings, gears, screwdown nuts, gibs and bridge parts.

C86500High Strength Yellow Brass

65000 Tensile Manganese Bronze

55-60 1.00 0.40 36-42 1.00 .5-1.5 .4-2.0 .1-1.5 70 ksi 25 ksi 25% Used as struts, machinery parts, gears, wear rings and in food processing rolls.

C86400High Strength Yellow Brass

Leaded Manganese Bronze

56-62 .5-1.5 .5-1.5 34-42 1.00 .5-1.5 .4-2.0 .1-1.5 60 ksi 20 ksi 15%Used as bearing cage blanks, light duty gears, bearings, machinery parts and valve stems.

C90300 Tin Bronze Navy “G” Bronze 86-89 7.5-9 0.30 3.0-5.0 1.00 0.20 44 ksi 22 ksi 18%Used as gears, valve and pump components, marine fittings, piston rings, valves, valve bodies.

C90500 Tin Bronze Gun Metal 86-89 9.0-11 0.30 1.0-3.0 1.00 0.20 44 ksi 25 ksi 10%Used as Bushings, Piston Rings, Pump Bodies, Valves, Worm Gears, Pump Impellers, Valve Bodies, Gears.

C90700 Tin Bronze Gear Bronze 88-90 10.0-12 0.50 0.50 0.50 0.15 40 ksi 25 ksi 10%Used as Worm Gears, Worm Wheels, Heavy Load Bearings, Gear Boxes, Speed Reducers, Valve Bodies.

C92200Leaded Tin Bronze

Navy “M” Bronze 86-90 5.5-6.5 1.0-2.0 3.0-5.0 1.00 38 ksi 19 ksi 18%Used as Cryogenic Valves, Water Meter Valve Components, Pump Impellers, Gears, Piston Rings, Bushings.

C92700Leaded Tin Bronze

88-10-2 Pb 86-89 9.0-11 1.0-2.5 0.70 1.00 0.20 38 ksi 20 ksi 8%Used as Gears, Pump Impellers, Heavy Duty Bearings, Pump Pistons, Bushings and Steam Fittings.

C92900Leaded Tin Bronze

Leaded Nickel Tin Bronze

82-86 9.0-11 2.0-3.2 0.25 2.8-4.0 0.20 45 ksi 25 ksi 8%Used as Cams, Gears, Wear Plates, Impellers for Mine Water, Pump Bodies, Worm Gears.

C93200*High Leaded Tin Bronze

Bearing Bronze SAE 660

81-85 6.3-7.5 6.0-8.0 2.0-4.0 1.00 0.20 35 ksi 20 ksi 10%Used as Bearings, Bushings, Light Duty Gears and Sprockets, Impellers, Wear strips, Plates, Fittings and Washers.

C93600High Leaded Tin Bronze

Modified SAE 64 79-83 6.0-8.0 11.0-13 1.00 1.00 0.20 33 ksi 20 ksi 10%Used as Bearings, Bushings, Seals, Rolling Mill Bearings, Rod Bushings, and Electric Motor Bearings.

C93700High Leaded Tin Bronze

Bearing Bronze SAE 64

78-82 9.0-11 8.0-11 0.80 0.50 0.70 35 ksi 20 ksi 6%Used as Bearings, Plates, Machine Parts, Bushings, Pumps, Impellers, Large Bearings for Ships.

C93800High Leaded Tin Bronze

Anti-Acid Metal SAE 67

75-79 6.3-7.5 13-16 0.80 1.00 0.15 25 ksi 16 ksi 5%Used as Bearings, Pumps, Low Friction Bushings, Journal Bearings for Rail Cars, Pump Impellers and Bodies for Acid Water.

C95200Aluminum Bronze

9A Aluminum Bronze 86 min.8.5-9.5

2.5-4.0 68 ksi 26 ksi 20%Used as Pickling Equipment, Pump Rods, Valve Bodies, Wear Plates, Pump & Valve Parts, Bearings, Bushings, Gears.

C95300Aluminum Bronze

9B Aluminum Bronze 83 min. 9.0-11 .8-1.5 70 ksi 26 ksi 25%Used as Pickling Hooks & Baskets, Valve Bodies, Gears, Cams, Mining Machine Parts.

C95400*Aluminum Bronze

9C Aluminum Bronze 83 min. 1.5010.0-11.5

3.0-5.0 0.50 85 ksi 32 ksi 12%Used as Gears, Worm Wheels, Bushings, Bearings, Wear Strips, Valve Bodies, Valve Seats and Valve Guides.

C95500*Nickel Aluminum Bronze

9D Aluminum Bronze 78 min. 3.0-5.510.0-11.5

3.0-5.03.5 max.

95 ksi 42 ksi 10%Used as heavy duty bushings and bearings, gears, wear parts, pump parts, and in aircraft and military applications.

C95800Nickel Aluminum Bronze

Alpha Nickel Aluminum Bronze

79 min. 0.03 4.0-5.08.5-9.5

3.5-4.5 .8-1.5 85 ksi 35 ksi 18% Valves for Seawater Application, Propeller Hubs & Blades, Worm Wheels, Pickling Equipment, and Marine Hardware.

C95900*Aluminum Bronze

Die Bronze Rem. 0.512.0-13.5

3.0-5.0 1.5Used as Wear Strips, Forming Rolls, Draw Dies, Die Inserts & Rings, and High Strength Bushings not subject to Shock.

Tel: 847-526-6000Fax: 847-438-6600

Toll-Free: 800-445-9970Morgan’s Most Requested Alloys