vs indoor li ghti ng · 2019. 10. 29. · 3306 zeptrion 25–420 universal dim ok (3 to 6 lamps)...

VS INDOOR LIGHTING

Vossloh-Schwabe Deutschland GmbH · Hohe Steinert 8 · 58509 Lüdenscheid · Germany · Phone +49 23 51/10 10 · Fax +49 23 51/10 12 17 · www.vossloh-schwabe.com

DecoLED

DECOLED

A NEW GENERATIONOF DECORATION

DECOLED – IDEAL FORINDOOR APPLICATIONSDecoLED, a highly efficient LED downlight, is the perfect solution forcommercial and residential applications. The die-cast casing is fitted with an easy adjustment function that allows the light to be positioned at the desirable angle. The adaptable spring clip makes installation quick, easy and hassle-free, and is suitable for all types of ceiling.

Thanks to the high light output of DecoLED, the DecoLED 7 W is an ideal replacement for 50 W halogen lamp. This results in an energy saving of more than 87% and reduces CO2 emissions, all of which makes DecoLED the more environmentally sustainable option.

Going greener has never been easier – for further energy-efficient andhighly eco-friendly lighting options, VS provides a full range of LEDmodules to suit your every need.

Typical applications• Residential lighting• Commercial lighting• Showcase lighting• Bathroom and kitchen lighting• Entertainment lighting

INTEGRATED DRIVER

DIMMABLE (SEE DIMMER LIST)

HIGH QUALITY COB TECHNOLOGY

SWIVELING LUMINAIRE HEAD (± 30°)

DEGREE OF PROTECTION: IP44 (FRONT PART)

DecoLED

2Vossloh-Schwabe Deutschland GmbH · Hohe Steinert 8 · 58509 Lüdenscheid · Germany · Phone +49 23 51/10 10 · Fax +49 23 51/10 12 17 · www.vossloh-schwabe.com

The values contained in this data sheet can change due to technical innovations. Any such changes will be made without separate notification.

LED

-Dow

nlig

hts_

Dec

oLED

_EN

– 2

/5

– 11

/20

16DecoLED

VS DecoLEDComplete LEDSpot equipped with optics,heatsink, leads and metal frame

Technical notesFor direct connection to mains voltageMains voltage: 220–240 V, 50/60 HzDimmablePower factor: > 0.9Metal frame, round, whiteFor cut-out: 68 mmSwiveling LED module (± 30°)Beam angle: 38° Allowed operating temperature: 0 to 35 °CLeads: Cu tinned, stranded conductors 0.5 mm2

Si-insulation and sleeveDegree of protection: IP20 (front part: IP44)Weight: 160 g

Type Ref. No. Colour Colour temperature Luminous flux Light intensity Beam angle CRI Max. Energylm at 230 V output efficiency

K min. typ. Candela ° Ra W

DecoLED-7-827-38 563284 warm white 2700 465 530 650 38 80 7 A++DecoLED-7-830-38 562282 warm white 3000 495 560 690 38 80 7 A++DecoLED-7-840-38 563285 neutral white 4000 525 600 720 38 80 7 A++

7 W



LED

-Dow

nlig

hts_

Dec

oLED

_EN

– 3

/5

– 11

/20

16

VS DecoLEDInstallation InstructionGeneral safety information • VS product may only be installed and commissioned by authorised and fully qualified staff.• These instructions must be carefully read before installing and commissioning the system,

as this is the only way to ensure safe and correct handling.• Before any work is carried out on the equipment, it must be disconnected from the mains.• All valid safety and accident-prevention regulations must be observed.• The products should never be inexpertly opened

as this poses lethal danger due to electrical shock. Repairs may only be undertaken by the manufacturer.

• DecoLED is dimmable with common phase-cut dimmers; minimum dimmer load has to be respected(see list of recommended dimmers on the next pages).

• The compatibility of the spot with the dimmer has to be confirmed prior to installation• The photo biological safety of the LED modules is classified into risk groups in accordance with EN 62471: 2008

and IEC TR 62778: risk group 1.

See drawing and cut out on previous page.

DecoLED

Assembly Correct position

Box dimensions



LED

-Dow

nlig

hts_

Dec

oLED

_EN

– 4

/5

– 11

/20

16

VS DecoLED – List of tested DimmersDecoLED is dimmable with common phase-cut dimmers; minimum dimming load has to be respected. The compatibility of the spot with the dimmer has to be confirmed prior to installation.

Brand Model # Capacity range (W) Dimmer type Dimming remarksAurora DSP-250 40–250 Leading-edge DIM OK

DSP-400X 60–400 Leading-edge DIM OK

ABB i-BUS KNX 6197-13-500 10–315 Trailing-edge DIM OK

Berker 2874 20–525 Trailing-edge DIM OK (min. 2 lamps)

2875 60–600 Leading-edge DIM OK

Busch Jaeger 2200U 60–400 Leading-edge DIM OK

2247U 500 Leading-edge DIM OK (min. 3 lamps)

2250U 60–600 Leading-edge DIM OK (min. 2 lamps)

6523U 2–100 LED Leading-edge DIM OK

CBI-Electric D500 500 Trailing-edge DIM OK (min. 4 lamps)

Clipsal 32E450LM 450 Leading-edge DIM OK

32E450TM 450 Trailing-edge DIM OK

32E450UDM 450 Universal DIM OK

KB31RD400 400 Leading-edge DIM OK

S2031RD800WE 800 Leading-edge DIM OK (min. 2 lamps)

Crabtree 66274 600 Leading-edge DIM OK (min. 3 lamps)

Elko 315GLE 20–315 Trailing-edge DIM OK

400GLi 40–400 Leading-edge DIM OK (min. 2 lamps)

Eltako EUD61NPN 400 Universal DIM OK

Feller 40600.RL 40–600 Leading-edge DIM OK

40300.RC 20–300 Trailing-edge DIM OK (max. 4 lamps)

40600.RC 20–600 Trailing-edge DIM OK

3306 zeptrion 25–420 Universal DIM OK (3 to 6 lamps)

3356 zeptrion 25–450 Universal DIM OK (3 to 6 lamps)

Finder 15.51.8.230.0400 10–400 Trailing-edge DIM OK (min. 3 lamps)

Gira 2262 00 20–500 Leading-edge DIM OK (min. 3 lamps)

0302 00 60–600 Leading-edge DIM OK (max. 4 lamps)

Govena PROP400U 40–400 Leading-edge DIM OK (min. 2 lamps)

Hager WBMD400LO 40–400 Leading-edge DIM OK

ENV012 300 Universal DIM OK (min. 2 lamps)

Helvar digiDIM 452 1000 Trailing-edge DIM OK

HPM Legrand HPM400LM 10–400 Leading-edge DIM OK (min. 3 lamps)

HPM400TM 10–400 Trailing-edge DIM OK

Intellibus IB LED 240BP 240 Leading-edge DIM OK

Jung 225 NV DE 20–500 Leading-edge DIM OK (min. 2 lamps)

225 TDE 50–525 Trailing-edge DIM OK (min. 2 lamps)

Khind DS2500 500 Leading-edge DIM OK

Legrand ADW-ETL4 420 Trailing-edge DIM OK

Lutron "Grafik Integrale GXI-3504-T“ 40–800 Trailing-edge DIM OK

Merten 572299 60–600 Leading-edge DIM OK

572599 20–500 Leading-edge DIM OK (min. 2 lamps)

577199 20–315 Trailing-edge DIM OK

MelloGlo DM400 40–400 Leading-edge DIM OK (min. 4 lamps)

DM800 250–800 Leading-edge DIM OK (min. 4 lamps)

MK K4501LV 40–220 Leading-edge DIM OK

niko 310-01700 35–320 Trailing-edge DIM OK

330-00700 5–350 Universal DIM OK

PEHA 435 HAN 60–600 Leading-edge DIM OK (min. 2 lamps)

435 HAB 20–525 Trailing-edge DIM OK (max. 5 lamps)

DecoLED



LED

-Dow

nlig

hts_

Dec

oLED

_EN

– 5

/5

– 11

/20

16

Brand Model # Capacity range (W) Dimmer type Dimming remarks

Philips Dynalite DDMC802GL-DGLEDM401 4Ch X 1A Trailing-edge DIM OK

R&D Electronics 350W RES/350W IND 350 Trailing-edge DIM OK

Richmond GRID 500 40–500 Leading-edge DIM OK (min. 2 lamps)

Veti V4014PWT 400 Trailing-edge DIM OK (min. 4 lamps)

V4018PWT 800 Trailing-edge DIM OK (min. 4 lamps)

Vossloh Schwabe 554591 250 Phase-cut DIM OK (min. 2 lamps)

554592 500 Phase-cut DIM OK (min. 2 lamps)

186607 3–300 Trailing-edge (digital) DIM OK (min. 2 lamps)

186608 3–300 Trailing-edge (digital) Bluetooth DIM OK (min. 2 lamps)

DecoLED


LED-DOWNLIGHTSLED Recessed Mounted DownlightUse of modern LED technology in conventional downlight applications provides an optimal light distribution and extended life time all at an affordable price.

VS LED downlights are fully compatible with existing conventional downlight infrastructure, and are the perfect choice for both new and replacement markets.

PRIME K L• COB technology• High efficiency of up to 140 lm/W• Slim design for easy installation in low false ceiling• High colour rendering index CRI: ≥ 85

LED DOWNLIGHTSHIGH QUALITYCOB TECHNOLOGY

Prime K L – LED Downlights

Prime K L Downlights

LONG SERVICE LIFE TIME: UP TO 100,000 hrs.

UP TO 140 L/W


5 YEARS GUARANTEEmore information under www.vossloh-schwabe.com

MADE IN GERMANY



LED

-Dow

nlig

hts_

Prim

e-KL

_201

7_EN

– 2

/6

– 12

/20

17Prime K L – LED Downlights

Prime K L – 4"Indoor LED recessed mounted downlightwith aluminium reflector

Reflector: Ø 118 mm, aluminiumMaterial: aluminium diecastPowder coating: epoxidFlange colour: white (RAL 9003)Front part: glassDegree of protection: IP44 (casing: IP20, front part: IP44)Use of external LED constant current driverOperating current range: up to 700 mAVoltage range: 30–40 V DCColour accuracy initially: 2 SDCMOperating life at ta = 25 °C

Lumen 350 mA 500 mA 700 mA

maintenance in hrs. in hrs. in hrs.

L90/B10 95,000 91,000 86,000

L80/B10 > 100,000 > 100,000 > 100,000

L70/B10 > 100,000 > 100,000 > 100,000

Electrical Characteristics

Type Typ. voltage DC (V) Typ. power consumption (W)

350 mA 500 mA 700 mA 350 mA 500 mA 700 mA

All types 33.6 34.6 37.2 11.8 17.3 25

Voltage and power tolerance: ± 10%

Maximum RatingsExceeding the maximum ratings can lead to reduction of service life or destruction of the modules.

Type Max. operating current Ambient temperature range Storage temperature range Max. allowed repetitive peak current

mA °C min. °C max. °C min. °C max. mA

All types 700 0 +30 –40 +105 1200

Optical Characteristics

Type Ref. No. Colour Correlated Typ. luminous flux* (lm) and efficiency* (lm/W) at Beam Typ. CRI UGR**colour temperature 350 mA 500 mA 700 mA angle

K lm lm/W lm lm/W lm lm/W ° RaClear glassDL-PRIME-K-4-L-830-20-C 566391 warm white 3000 1570 133 2170 125 2915 117 20 85 24.3DL-PRIME-K-4-L-840-20-C 566392 neutral white 4000 1620 137 2240 129 3010 120 20 85 24.4DL-PRIME-K-4-L-850-20-C 566393 cool white 5000 1640 139 2265 131 3040 122 20 85 24.4

Frost glassDL-PRIME-K-4-L-830-45-D 566394 warm white 3000 1315 111 1820 105 2445 98 45 85 25.6DL-PRIME-K-4-L-840-45-D 566395 neutral white 4000 1360 115 1880 109 2525 101 45 85 25.7DL-PRIME-K-4-L-850-45-D 566396 cool white 5000 1375 117 1900 110 2550 102 45 85 25.8

Half frost glassDL-PRIME-K-4-L-830-25-SD 566397 warm white 3000 1510 128 2090 121 2805 112 25 85 22.6DL-PRIME-K-4-L-840-25-SD 566398 neutral white 4000 1560 132 2160 125 2900 116 25 85 22.7DL-PRIME-K-4-L-850-25-SD 566399 cool white 5000 1575 133 2180 126 2925 117 25 85 22.7

* Production tolerance of luminous flux and efficiency: ±10% | ** at operating current of 500 mA

Clear Frost Half frost



LED

-Dow

nlig

hts_

Prim

e-KL

_201

7_EN

– 3

/6

– 12

/20






L90/B10 95,000 91,000 86,000

L80/B10 > 100,000 > 100,000 > 100,000

L70/B10 > 100,000 > 100,000 > 100,000



350 mA 500 mA 700 mA 350 mA 500 mA 700 mA

All types 33.6 34.6 37.2 11.8 17.3 25





All types 700 0 +30 –40 +105 1200



K lm lm/W lm lm/W lm lm/W ° RaClear glassDL-PRIME-K-6-L-830-75-C 566400 warm white 3000 1570 133 2170 125 2915 117 75 85 24.,8DL-PRIME-K-6-L-840-75-C 566401 neutral white 4000 1620 137 2240 129 3010 120 75 85 25.0DL-PRIME-K-6-L-850-75-C 566402 cool white 5000 1640 139 2265 131 3040 122 75 85 25.0




FrostClear Half frost



LED

-Dow

nlig

hts_

Prim

e-KL

_201

7_EN

– 4

/6

– 12

/20






L90/B10 90,000 86,000 82,000

L80/B10 > 100,000 > 100,000 > 100,000

L70/B10 > 100,000 > 100,000 > 100,000



700 mA 900 mA 1050 mA 700 mA 900 mA 1050 mA

All types 34 34,8 35,3 23,8 31 37





All types 1050 0 +30 –40 +105 1200



K lm lm/W lm lm/W lm lm/W ° RaClear glassDL-PRIME-K-8-L-830-70-C 566409 warm white 3000 3130 132 3920 126 4475 121 70 85 25.2DL-PRIME-K-8-L-840-70-C 566410 neutral white 4000 3240 136 4050 131 4630 125 70 85 25.4DL-PRIME-K-8-L-850-70-C 566411 cool white 5000 3265 137 4090 132 4670 126 70 85 25.4




FrostClear Half frost



LED

-Dow

nlig

hts_

Prim

e-KL

_201

7_EN

– 5

/6

– 12

/20


Prime K LComparison with Compact Fluorescent Lamps

Type LED CFL

Service lifetime 100,000 hrs. 10,000 hrs.

Prime K L – 4" 17 W 2 x 13 W

Prime K L – 6" 25 W 2 x 18 W

Prime K L – 8" 31 W 2 x 26 W

Safety and Installation InstructionsThe following instructions must be observed. Non-observance can result in personal injury and damage to property or can destroy both luminaire and/or control gear. In such cases, the manufacturer'sliability and any entitlement to warranty claims will be invalidated.

General Instructions• Please read these instructions prior to installation/commissioning

and keep them safe for future use.• Any modification carried out on the luminaire itself will invalidate

the manufacturer's liability.• The luminaire contains integrated and non-exchangeable LED light

sources.• Care must be taken to ensure the luminaire is operated only using

the supplied Vossloh-Schwabe control gear and accessories or using an alternative brand of approved control gear.

• Given functional problems, please contact your Vossloh-Schwabe representative.

Installation and Operating Instructions• Depending on the site of operation, the degree of protection will

have to be observed during installation.• Installation of this luminaire may be undertaken only by authorised

and suitably trained staff in accordance with any country-specific regulations.

• Installation must be carried out only after disconnecting the device from mains voltage, i.e. in a voltage-free state.

• For trouble-free operation, it is important to ensure that the permis-sible ambient temperature range ta as stipulated in the datasheet is not exceeded.

• Only ever operate the luminaire with all protective covers in place.• Should the power supply cable be damaged, please scrap the

luminaire and/or contact your VS representative.• Please ensure that the correct supply voltage is applied by checking

it against the voltage requirements of the luminaire and the driver.• Connecting luminaires (LED modules) to supply units that are

already connected to the mains can result in long-term damage.• Touchable luminaire parts can reach high temperatures (risk of

burning)!• Highly flammable materials (e.g. cladding or insulation material)

must be kept away from the luminaire.

Safety Symbols Specifies the minimum clearance to flammable materials

in the direction of radiation.

Indoor operation

Please ensure that the way the luminaire is positioned means there is no reason to expect anyone could look into it for a longer period of time with less clearance than stated in the datasheet

Caution: risk of electric shock

Caution: components with a risk of electrostatic charging

Luminaire/voltage supply unit must not be covered with any thermally insulating materials or similar.

Any cover with damage must be replaced

Cleaning Instructions• Depending on the conditions on site, the luminaire must be cleaned

on a regular basis.• Prior to cleaning the luminaire, please ensure it is disconnected from

the mains and is given time to cool down.• Never use any flammable, abrasive, harsh or corrosive cleaning

liquids.• Once it has cooled down, the luminaire can be cleaned with a

damp cloth.• Let the luminaire dry fully before switching it back on.

Answers to technical questions can be found on our website atwww.volssloh-schwabe or ask your Vossloh-Schwabe representative.

Product guarantee• 5 years• The conditions for the Product Guarantee of the Vossloh-Schwabe

Group shall apply as published on our homepage(www.vossloh-schwabe.com).We will be happy to send you these conditions upon request.

•



LED

-Dow

nlig

hts_

Prim

e-KL

_201

7_EN

– 6

/6

– 12

/20

17

Prime K LSafety and assembly information for LED downlights

LED Constant Current DriversMax. output Ref. No. Version Output current Output voltage DC Casing Dimensions Max. service lifetime/casing temperatureW mA V LxBxH (mm) Std. tc (°C)

PrimeLine24 186465 DALI/PUSH 350 14–34 K2.1 103.6 x 67.4 x 31 100,000 65

186573 500

186574 70037 186503 DALI/PUSH 350 30–53 K3.2 123.4 x 79.4 x 32.6 100,000 65

186571 500

186572 700

ComfortLine24 186279 1–10 V 700 14–34 K2.1 103.6 x 67.4 x 31 100,000 6522 186684 on/off 400–500 25–43 K33 169 x 43 x 30 6030 186685 600–700 6539 186686 800–900 7045 186687 950–1050 70

EasyLine28.5 186531 on/off 500 25–57 K2.1 103.6 x 67.4 x 31 50,000 7034.2 600

40 700

34.4 186532 800 25–4339.8 925

45 1050

Prime K L – LED Downlights

min

. 250

min. 200

Built-in Assembly Correct position

OK


LED DOWNLIGHTSLED Recessed Mounted DownlightLED, as today's most efficient light source, delivers a high quality light with an increased lifetime, compared to conventional compact floure-scent light sources. LED Downlights provide an optimal light distribution and extended life time all at an affordable price. LED downlights are fully compatible with existing conventional downlight infrastructure, and are the perfect choice for both new and replacement markets.

PRIME K R• DoB technology for direct connection to mains voltage• High efficiency of up to 97 lm/W• Slim design for easy installation in low false ceiling• High colour rendering index CRI: ≥ 80

LED DOWNLIGHTS

FOR DIRECT CONNECTIONTO MAINS VOLTAGE

Prime – LED Downlights

Prime K R Downlights

LONG SERVICE LIFE TIME: 50,000 h

100% INSTANT LIGHT

INTEGRATED DRIVER

DIMMABLE (SEE DIMMER LIST)


5 YEARS GUARANTEE

Check here for compatible Dimmer list:



LED

-Dow

nlig

hts_

Prim

e KR

_97l

m_2

017_

EN –

2/

7 –

06/

2017


Prime K R4" – 15 WIndoor LED recessed mounted downlightwith aluminium reflectorFor direct connection to mains voltage

Mains voltage: 220–240 V, 50–60 HzPower factor: > 0.95THD: < 20%Reflector: Ø 118 mm, aluminiumMaterial: aluminium diecastPowder coating: epoxidFlange colour: white (RAL 9003)Front part: glassDegree of protection: IP20 or IP44 (casing: IP20, front part: IP44)Allowed operating temperature: 0 to 30 °CAllowed storage temperature: –30 to 60 °CColour accuracy initially: 3 SDCMDimmable: See dimmer list

Type Ref. No. Colour Correlated Power Max. Beam Typ. CRI Energy efficiencyDegree of protection colour consumption luminous flux* angle at max. current*

IP20 IP44 Front temperature (K) W lm ° RaClear glassDL-PRIME-K-4-R15-830-25-C 563107 565536 warm white 3000 15 1292 25 80 A+DL-PRIME-K-4-R15-840-25-C 563109 565537 neutral white 4000 15 1364 25 80 A+DL-PRIME-K-4-R15-850-25-C 563111 565538 cool white 5000 15 1435 25 80 A+

Frost glassDL-PRIME-K-4-R15-830-50-D 563108 565539 warm white 3000 15 1221 50 80 A+DL-PRIME-K-4-R15-840-50-D 563110 565540 neutral white 4000 15 1287 50 80 A+DL-PRIME-K-4-R15-850-50-D 563112 565545 cool white 5000 15 1353 50 80 A+

Half frost glassDL-PRIME-K-4-R15-830-45-SD on request 565549 warm white 3000 15 1276 45 80 A+DL-PRIME-K-4-R15-840-45-SD on request 565550 neutral white 4000 15 1347 45 80 A+DL-PRIME-K-4-R15-850-45-SD on request 565590 cool white 5000 15 1419 45 80 A+

* Production tolerance of luminous flux, voltage and power consumption: ±10%

Prime K R – 4" – 15 W

Clear glass

Frost glass

I (cd/klm)

60°

90°

800120016002000

30°

I (cd/klm)

300450600750

60°

90°

30°



LED

-Dow

nlig

hts_

Prim

e KR

_97l

m_2

017_

EN –

3/

7 –

06/

2017




Type Ref. No. Colour Correlated Power Max. Beam Typ. Energy efficiencyDegree of protection colour consumption luminous flux* angle CRI at max. current*


Frost glassDL-PRIME-K-6-R20-830-75-D 563114 565568 warm white 3000 20 1584 75 80 ADL-PRIME-K-6-R20-840-75-D 563116 565569 neutral white 4000 20 1672 75 80 A+DL-PRIME-K-6-R20-850-75-D 563118 565570 cool white 5000 20 1760 75 80 A+



Prime K R – 6" – 20 W

60°

90°

I (cd/klm)

400600800

30°

60°

90°

I (cd/klm)

200300400500

30°

Clear glass

Frost glass



LED

-Dow

nlig

hts_

Prim

e KR

_97l

m_2

017_

EN –

4/

7 –

06/

2017






FrostglasDL-PRIME-K-8-R20-830-90-D 563120 565577 warm white 3000 20 1622 90 80 ADL-PRIME-K-8-R20-840-90-D 563122 565578 neutral white 4000 20 1716 90 80 A+DL-PRIME-K-8-R20-850-90-D 563124 565579 cool white 5000 20 1804 90 80 A+



Prime K R – 8" – 20 W

60°

90°

I (cd/klm)

200300400500600 30°

200300400

60°

90°

I (cd/klm)

30°

Clear glass

Frost glass



LED

-Dow

nlig

hts_

Prim

e KR

_97l

m_2

017_

EN –

5/

7 –

06/

2017






Frost glassDL-PRIME-K-8-R30-830-90-D 563126 565583 warm white 3000 30 2376 90 80 ADL-PRIME-K-8-R30-840-90-D 563128 565584 neutral white 4000 30 2508 90 80 A+DL-PRIME-K-8-R30-850-90-D 563130 565585 cool white 5000 30 2640 90 80 A+

Half frost glassDL-PRIME-K-8-R30-830-45-SD on request 565586 warm white 3000 30 2409 45 80 ADL-PRIME-K-8-R30-840-45-SD on request 565587 neutral white 4000 30 2530 45 80 A+DL-PRIME-K-8-R30-850-45-SD on request 565812 cool white 5000 30 2634 45 80 A+


Prime K R – 8" – 30 W

200300400500600

I (cd/klm)

60°

90°

30°

200300400500

I (cd/klm)

60°

90°

30°

Clear glass

Frost glass



LED

-Dow

nlig

hts_

Prim

e KR

_97l

m_2

017_

EN –

6/

7 –

06/

2017


Prime K RInstallation InstructionGeneral safety information • VS product may only be installed and commissioned by authorised and fully qualified staff.• These instructions must be carefully read before installing and commissioning the system,

as this is the only way to ensure safe and correct handling.• Before any work is carried out on the equipment, it must be disconnected from the mains.• All valid safety and accident-prevention regulations must be observed.• The products should never be inexpertly opened as this poses lethal danger due to electrical shock.

Repairs may only be undertaken by the manufacturer.• Prime K R is dimmable with common phase-cut dimmers; minimum dimmer load has to be respected. • The compatibility of the downlights with the dimmer has to be confirmed prior to installation• If module is used in rooms with fast moving parts as the light modulation might cause stroboscopic effects.• This LED module might interfere with displays and cameras due to modulation.• The photo biological safety of the LED modules is classified into risk groups in accordance with EN 62471: 2008

and IEC TR 62778: risk group 1.• In case of broken glass please switch OFF mains (220–240 V) and have a qualified staff replace the complete luminaire.• Do not use PRIME K R in locations containing a bath or shower; Prime K R is IP20 protected.

See drawing and cut out for each product on previous pages

Assembly Correct position

ConnectionBox dimensions

min

. 250

min. 200

3 x 0.75 - 2.5 mm2

POWER SUPPLY

L

N

8.5-9mm

20mm

OK



LED

-Dow

nlig

hts_

Prim

e KR

_97l

m_2

017_

EN –

7/

7 –

06/

2017


Prime K Rtested DimmersPrime K R is dimmable with common phase-cut dimmers; minimum dimming load has to be respected. The compatibility of the downlights with the dimmer has to be confirmed prior to installation.

• Vossloh-Schwabe DimONE 186607• Vossloh-Schwabe DimONE Bluetooth® 186608• Vossloh-Schwabe Dimmer 250 W 554591• Vossloh-Schwabe Dimmer 500 W 554592• Jung 225TDE Insta 51040• Gira 030700 = Insta• Berker 2874• Berker 286710 Insta 5190• Busch Jäger 6513 U-102• Busch Jäger 6519U• Sygonix 33595A• Merten MEG5136-0000• LeGrand ADW-ETL4-420VA• Hager WUD82 + WYA920• Merten 577899 + 570419• Gira 2262 Anschn.• Jung 225 NVDE Anschn.• Berker 85421200 leading edge Anf. 2013 / equiv. Hager Anf. 2013 both Touch• Sygonix 33596V leading edge• Sygonix 33594C leading edge• Sygonix 33594R leading edge• Merten MEG5170-0300 + 343519• Eltako EUD61NPN univ.• Eltako EUD61M-UC univ.• Eltako EUD61NP univ.• Hager EVN002 univ.• Hager EVN004 univ.• Berker 16701 univ.• Jung UD1255REG univ.• Busch Jäger 6583 univ.• Eltako EUD12D univ. / Eltako EUD12F univ. / Eltako EUD12Z univ. • Eltako EUD12Z univ. /

Prime K R – 4" – 15 W

2 x 13 W CFL10,000 h

15 W LED50,000 h

Prime K R – 6" – 20 W Prime K R – 8" – 20 W Prime K R – 8" – 30 W

2 x 18 W CFL10,000 h

20 W LED50,000 h

2 x 18 W CFL10,000 h

20 W LED50,000 h

2 x 26 W CFL10,000 h

30 W LED50,000 h

Comparison with Compact Fluorescent Lamps


EVOLVE 111/ NEXT 111

LEDSpots for Retail Lighting – HID Replacement

NEW NEXT 111 / EVOLVE 111More than just a simple update, but a complete redesign of high-end LEDSpots

Your NEXT 111 has been substantially improved to maximise perfor-mance and simplify installation. The Evolve 111 is the next generation of AR111 engine with optics.

Evolve 111 / NEXT 111• Replacement for HID lamps 20–150 W• Built-in spot with heat sink based on LUGA modules

Typical applications• Replacement of AR111 lamps• Integration in luminaires• Retail lighting• Downlights• Light advertising• Entertainment



LED

Spot

_Evo

lve11

1_N

EXT1

11_E

N –

2/

7 –

03/

2018


Evolve 111Built-in LEDSpot equipped with interchangeable optics, heat sink and leads

Technical notesOptics: Ø 111 mm, PC, interchangeableHeat sink material: aluminium Lumen maintenance: L90/B10; 50,000 hrs. 85 °C at tp point Max. operating temperature at tp point: 120 °C: type DMS126 at 500 mA 110 °C: type DMS120 at 800 mA Temperature depends on installation situation and has to be checked by the luminaire manufacturer. Colour accuracy initially: 2 SDCM Use of external LED constant-current drivers The ceramic PCB ensures optimum thermal management Leads: Cu tinned, stranded conductors AWG22, FEP-insulation and PVC sleeve, length: 600 mm With integrated cord grip Packaging unit: 6 pcs.

Height Weight

Heat sink Total LEDSpot g

20 mm 41.8 mm 370

40 mm 61.8 mm 430

Heat sink 20 mm Heat sink 40 mm

Evolve 111

S126S120

Evolve 14° (S126) Evolve 16° (S120)





LED

Spot

_Evo

lve11

1_N

EXT1

11_E

N –

3/

7 –

03/

2018


Evolve 111Built-in LEDSpot equipped with interchangeable optics, heat sink and leads

Type Ref. No. Colour Correlated Typ. luminous flux and typical voltage (Utyp.) Light intensity Beam CRI Energyfor colour and power consumption (Pel)* at max. angle efficiency

black white temperature 350 mA 500 mA current at max.

LEDSpots LEDSpots K lm lm/W lm lm/W Candela ° Ra current

Type S126 Pel = 11.8 W Pel = 17.3 W

Heat sink height = 20 mm Vf = 33.6 V Vf = 34.6 VEvolve 111 S126H 567629 567642 warm white 3000 1530 129 2120 121 16600 14° 85 A++Evolve 111 S126H 567632 567645 neutral white 4000 1580 133 2190 125 17200 14° 85 A++Evolve 111 S126H 567630 567643 warm white 3000 1550 130 2145 123 6200 28° 85 A++Evolve 111 S126H 567633 567646 neutral white 4000 1600 134 2215 127 6400 28° 85 A++Evolve 111 S126H 567631 567644 warm white 3000 1590 134 2200 126 4500 35° 85 A++Evolve 111 S126H 567634 567647 neutral white 4000 1640 138 2270 130 4650 35° 85 A++

Versions with other colour temperature, CRI 95 or pearl white on request * Production tolerance of luminous flux, voltage and power consumption: ±10%


black white temperature 600 mA 700 mA 800 mA current at max.

LEDSpots LEDSpots K lm lm/W lm lm/W lm lm/W Candela ° Ra current

Type S120 Pel = 20.2 W Pel = 23.8 W Pel = 27.5 W

Heat sink height = 40 mm Vf = 33.7 V Vf = 34.0 V Vf = 34.4 VEvolve 111 S120H 567635 567648 warm white 3000 2625 129 3020 126 3400 123 18400 16° 85 A++Evolve 111 S120H 567638 567651 neutral white 4000 2710 133 3120 130 3515 127 19000 16° 85 A++Evolve 111 S120H 567636 567649 warm white 3000 2695 132 3100 129 3490 126 8700 26° 85 A++Evolve 111 S120H 567639 567652 neutral white 4000 2780 136 3200 133 3610 130 8980 26° 85 A++Evolve 111 S120H 567637 567650 warm white 3000 2760 135 3175 132 3580 129 7900 32° 85 A++Evolve 111 S120H 567640 567653 neutral white 4000 2850 140 3280 137 3700 134 8150 32° 85 A++




LED

Spot

_Evo

lve11

1_N

EXT1

11_E

N –

4/

7 –

03/

2018


NEXT 111Built-in LEDSpot equipped with an interchangeable aluminium reflector, heat sink and leads

Technical notesReflector: Ø 111 mm, aluminium, bayonet fixing, interchangeable Heat sink material: aluminiumLumen maintenance: L90/B10; 50.000 hrs. 85 °C at tp point Max operating temperature at tp point: 120 °C: type DMS126 at 500 mA 110 °C: type DMS120 at 800 mA Temperature depends on installation situation and has to be checked by the luminaire manufacturer. Colour accuracy initially: 2 SDCM Use of external LED constant-current drivers The ceramic PCB ensures optimum thermal management Plastic clear cover to protect reflector (opaque cover on request) Fixation for reflector: front rim for heat sink: lateral fixation with M5 screws and nuts or rear side fixation with self-tapping screws ST2.9 Leads: Cu tinned, stranded conductors AWG22, FEP-insulation and PVC sleeve, length: 600 mm With integrated cord gripPackaging unit: 6 pcs.

Height Weight

Heat sink Total LEDSpot g

20 mm 59.4 mm 370

40 mm 79.4 mm 430

NEXT 14° (S126) NEXT 16° (S120)

NEXT 24° (S126) NEXT 25° (S120)

NEXT 34° (S126) NEXT 38° (S120)

NEXT 50° (S126) NEXT 50° (S120)

NEXT 111

Heat sink 20 mm Heat sink 40 mm

S126S120



LED

Spot

_Evo

lve11

1_N

EXT1

11_E

N –

5/

7 –

03/

2018


NEXT 111Built-in LEDSpot equipped with an interchangeable aluminium reflector, heat sink and leads


black white temperature 350 mA 500 mA current at max.

LEDSpots LEDSpots K lm lm/W lm lm/W Candela ° Ra current

Type S126 Pel = 11.8 W Pel = 17.3 W

Heat sink height = 20 mm Vf = 33.6 V Vf = 34.6 VNext 111 S126H 567592 567601 warm white 3000 1665 140 2305 132 14770 14° 85 A++Next 111 S126H 567596 567605 neutral white 4000 1720 145 2380 136 15250 14° 85 A++Next 111 S126H 567593 567602 warm white 3000 1665 140 2305 132 6890 24° 85 A++Next 111 S126H 567597 567606 neutral white 4000 1720 145 2380 136 7100 24° 85 A++Next 111 S126H 567594 567603 warm white 3000 1685 142 2330 133 3600 34° 85 A++Next 111 S126H 567599 567607 neutral white 4000 1740 146 2410 138 3730 34° 85 A++Next 111 S126H 567595 567604 warm white 3000 1650 139 2275 130 2320 50° 85 A++Next 111 S126H 567600 567608 neutral white 4000 1700 143 2355 135 2400 50° 85 A++



black white temperature 600 mA 700 mA 800 mA current at max.

LEDSpots LEDSpots K lm lm/W lm lm/W lm lm/W Candela ° Ra current

Type S120 Pel = 20.2 W Pel = 23.8 W Pel = 27.5 W

Heat sink height = 40 mm Vf = 33.7 V Vf = 34.0 V Vf = 34.4 VNext 111 S120H 567613 567621 warm white 3000 2895 142 3325 139 3750 135 18960 16° 85 A++Next 111 S120H 567617 567625 neutral white 4000 2990 147 3440 143 3875 140 19500 16° 85 A++Next 111 S120H 567614 567622 warm white 3000 2895 142 3325 139 3750 135 10220 25° 85 A++Next 111 S120H 567618 567626 neutral white 4000 2990 147 3440 143 3875 140 10570 25° 85 A++Next 111 S120H 567615 567623 warm white 3000 2925 143 3365 140 3790 137 5700 38° 85 A++Next 111 S120H 567619 567627 neutral white 4000 3020 148 3480 145 3920 142 5900 38° 85 A++Next 111 S120H 567616 567624 warm white 3000 2860 140 3290 137 3705 134 3900 50° 85 A++Next 111 S120H 567620 567628 neutral white 4000 2950 145 3400 142 3830 138 4050 50° 85 A++




LED

Spot

_Evo

lve11

1_N

EXT1

11_E

N –

6/

7 –

03/

2018


LED DriversYou will find more information about our LED drivers on our website: www.vossloh-schwabe.com

Capacity range Output Output Ref. No. Version Current setting Dimming Max. service life time Dimensions For typecurrent DC voltage DC at tc (LxWxH) DMS DMS

W mA V hrs. °C mm 126H 120H

350 mA10.5–15 350 30–43 186591 EasyLine — — 30,000 75 115x45x25 x x8.75–15 350 25–43 186650 ComfortLine LEDSet — 100,000 70 97x43x30 x x8.75–15 350 25–43 186664 ComfortLine LEDSet — 100,000 70 97x43x30 x x10.5–18.5 350 30–53 186503 PrimeLine Programmable DALI 100,000 65 123.4x79x4x32.6 x x11.2–18 350 32–52 186415 EasyLine — Phase cutting 30,000 80 153x41.4x32 x x6.3–19.95 350 18–57 186431 EasyLine — — 50,000 65 122x45x19 x x5.95–14 350 17–40 186463 EasyLine Terminals — 50,000 65 103.6x67.4x31 x x5.25–16.1 350 15–46 186719 EasyLine — — 50,000 70 97.1x42x6x30.3 x x5.25–16.1 350 15–46 186720 EasyLine — — 50,000 70 146.5x43x7x30 x x

500 mA15–21.5 500 30–43 186592 EasyLine — — 50,000 65 115x45x25 x x12.5–21.5 500 25–43 186650 ComfortLine LEDSet — 100,000 70 97x43x30 x x12.5–21.5 350 25–43 186664 ComfortLine LEDSet — 100,000 70 97x43x30 x x12.5–21.5 500 25–43 186651 ComfortLine Terminals — 100,000 70 97x43x30 x x8.75–15 500 25–43 186671 ComfortLine Terminals — 100,000 70 97x43x30 x x15–26.5 500 30–53 186571 PrimeLine Programmable DALI 100,000 65 123.4x79x4x32.6 x x12.5–28.5 500 25–57 186531 EasyLine Terminals — 50,000 65 103.6x67.4x31 x x12.5–25 500 25–50 186363 EasyLine — — 50,000 60 123.4x79x4x32.6 x x14–21 500 28–42 186505 EasyLine — Phase cutting 50,000 65 153x41.4x32 x x8.5–20 500 17–40 186463 EasyLine Terminals — 50,000 65 103.6x67.4x31 x x7.5–23 500 15–46 186721 EasyLine — — 50,000 75 97.1x42x6x30.3 x x7.5–23 500 15–46 186722 EasyLine — — 50,000 70 146.5x43x7x30 x x

600 mA15–25.8 600 25–43 186650 ComfortLine LEDSet — 100,000 70 97x43x30 — x15–25.8 600 25–43 186664 ComfortLine LEDSet — 100,000 70 97x43x30 — x15–25.8 600 25–43 186652 ComfortLine Terminals — 100,000 70 97x43x30 — x18–31.8 600 30–53 186503 PrimeLine Programmable DALI 100,000 65 123.4x79x4x32.6 — x15–34.2 600 25–57 186531 EasyLine Terminals — 50,000 65 103.6x67.4x31 — x15–25.8 600 25–43 186671 ComfortLine Terminals — 100,000 70 97x43x30 — x

700 mA21–30.1 700 30–43 186593 EasyLine — — 30,000 80 103x67x30 — x17.5–30.1 700 25–43 186650 ComfortLine LEDSet — 100,000 70 97x43x30 — x17.5–30.1 700 25–43 186664 ComfortLine LEDSet — 100,000 70 97x43x30 — x17.5–30.1 700 25–43 186652 ComfortLine Terminals — 100,000 70 97x43x30 — x17.5–30.1 700 25–43 186670 ComfortLine Terminals — 100,000 70 97x43x30 — x21–37.1 700 30–53 186572 PrimeLine Programmable DALI 100,000 65 123.4x79x4x32.6 — x17.5–39.9 700 25–57 186531 EasyLine Terminals — 50,000 65 103.6x67.4x31 — x21–37.1 700 30–53 186308 ComfortLine — DALI 100,000 65 123.4x79x4x32.6 — x21–37.1 700 30–53 186556 ComfortLine — — 100,000 65 159.4x79.4x33 — x21–37.1 700 30–53 186306 ComfortLine — — 100,000 65 123.4x79x4x32.6 — x14–35 700 20–50 186364 EasyLine — — 50,000 60 123.4x79x4x32.6 — x21–31.5 700 30–45 186501 EasyLine — — 50,000 65 171x41x32 — x10.5–31.5 700 15–45 186723 EasyLine — — 50,000 65 97.1x42x6x30.3 — x10.5–31.5 700 15–45 186724 EasyLine — — 50,000 65 146.5x43x7x30 — x

800 mA20–34.4 800 25–43 186650 ComfortLine LEDSet — 100,000 70 97x43x30 — x20–34.4 800 25–43 186664 ComfortLine LEDSet — 100,000 70 97x43x30 — x20–34.4 800 25–43 186653 ComfortLine Terminals — 100,000 70 97x43x30 — x20–34.4 800 25–43 186532 EasyLine Terminals — 50,000 65 103.6x67.4x31 — x20–34.4 700 25–43 186670 ComfortLine Terminals — 100,000 70 97x43x30 — x

Please ensure you choose the correct LED driver for the module in question and that the respective output parameters (current, voltage, wattage) are correct.



LED

Spot

_Evo

lve11

1_N

EXT1

11_E

N –

7/

7 –

03/

2018


LEDSpot Evolve 111 / NEXT 111 – Installation InstructionGeneral safety information • VS product may only be installed and commissioned by authorised and fully qualified staff.• These instructions must be carefully read before installing and commissioning the system,

as this is the only way to ensure safe and correct handling.• An external constant-current driver is required.• Before any work is carried out on the equipment, it must be disconnected from the mains.• All valid safety and accident-prevention regulations must be observed.• The products should never be inexpertly opened. Repairs may only be undertaken by the manufacturer.

Product Guarantee• 5 years• The conditions for the Product Guarantee of the

Vossloh-Schwabe Group shall apply as published on our homepage (www.vossloh-schwabe.com). We will be happy to send you these conditions upon request.

Built-in Correct position


LED FlatPanel Gen. 2LED Recessed Mounted FlatPanelsThe use of state-of-the-art LED technology in conventional office and hall illumination provides a lot of advantages like an optimal light distribution and an increased lifetime all at an affordable price. LED FlatPanels are fully compatible with existing conventional lighting infrastructure, and are the perfect choice for both new and replace-ment markets.

FlatPanel• With or without external connected LED driver• High efficiency of up to 125 lm/W• Flat design for easy installation in low false ceiling• High colour rendering index CRI: ≥ 80

LED FlatPanel Gen. 2

ULTRA FLAT LIGHT PANEL


LED FlatPanel

LONG SERVICE LIFE TIME: 50,000 h (L70/B50)

100% INSTANT LIGHT

WITH AND WITHOUT SEPARATE DRIVER

STANDARD AND UGR19 VERSION

5 YEARS GUARANTEE



LED

-Lum

inai

re_F

lat-P

anel

-Gen

-2_E

N –

2/

8 –

04/

2018

LED FlatPanel Gen. 2Built-in LED light panelDimensions:• FP2-6060: 595x595x10.5 mm • FP2-6262: 620x620x10.5 mm• FP2-12030: 1195x295x10.5 mmFlange colour: white (RAL 9003) Impact rating: IK04Colour accuracy initially: typ. 3 SDCMMinimum order quantity: 48 pcs.

With external LED driver K33.1For mains voltage: 220–240 V, 50–60 Hz Flicker: < 1%Power factor: > 0.98

Without external LED driverOperating current: max 1050 mA

Maximum ratingsExceeding the maximum ratings can lead to reduction of service life or destruction of the panels.Values are only for the FlatPanel.

Type Max. operating current Typ. voltage Allowed operating temperature at ta Allowed storage temperature at taDC min. max. min. max.

mA V °C °C °C °C

All types 1050 30–36 –10 40 –20 60

595x595 mm 620x620 mm

Standard UGR19 – 595x595 UGR19 – 620x620


1195x295 mm



LED

-Lum

inai

re_F

lat-P

anel

-Gen

-2_E

N –

3/

8 –

04/

2018

LED FlatPanel Gen. 2Standard version – incl. driver

Type Ref. No. Colour Correlated Power Typ. luminous flux* Typ. UGR Beam Typ. CRIWith driver colour temperature consumption* and efficiency 4H-8H angle

K33.1 K W lm lm/W ° Ra595x595 mmFP2-6060-38-830 567799 warm white 3000 38 4300 116 22 113 80FP2-6060-38-840 567800 neutral white 4000 38 4300 116 22 113 80FP2-6060-38-865 567801 cold white 6500 38 4300 116 22 113 80

620x620 mmFP2-6262-38-830 567802 warm white 3000 38 4400 117 22 113 80FP2-6262-38-840 567803 neutral white 4000 38 4400 117 22 113 80FP2-6262-38-865 567804 cold white 6500 38 4400 117 22 113 80

1195x295 mmFP2-12030-38-830 567805 warm white 3000 38 4100 112 22 113 80FP2-12030-38-840 567806 neutral white 4000 38 4100 112 22 113 80FP2-12030-38-865 567807 cold white 6500 38 4100 112 22 113 80

* Production tolerance of luminous flux and power consumption: ±10%

UGR19 version – incl. driverLow glare, especially suitable for office illumination

Type Ref. No. Colour Correlated Power Typ. luminous flux* Typ. UGR Beam Typ. CRIcolour temperature consumption* and efficiency 4H-8H angle

K W lm lm/W ° Ra595x595 mmFP2-6060-38-830-U 567808 warm white 3000 38 4000 110 18 84 80FP2-6060-38-840-U 567809 neutral white 4000 38 4000 110 18 84 80FP2-6060-38-865-U 567810 cold white 6500 38 4000 110 18 84 80

620x620 mmFP2-6262-38-830-U 567811 warm white 3000 38 4200 110 18 84 80FP2-6262-38-840-U 567812 neutral white 4000 38 4200 110 18 84 80FP2-6262-38-865-U 567813 cold white 6500 38 4200 110 18 84 80

1195x295 mmFP2-12030-38-830-U 567814 warm white 3000 38 3800 100 18 84 80FP2-12030-38-840-U 567815 neutral white 4000 38 3800 100 18 84 80FP2-12030-38-865-U 567816 cold white 6500 38 3800 100 18 84 80

* Production tolerance of luminous flux and power consumption: ±10%




LED

-Lum

inai

re_F

lat-P

anel

-Gen

-2_E

N –

4/

8 –

04/

2018

LED FlatPanel Gen. 2Standard version – without driver

Type Ref. No. Colour Correlated Typ. luminous flux* and efficiency, power consumption and typ. UGR Beam Typ. CRIcolour temperature 700 mA** Typ. UGR 1050 mA** Typ. UGR angle

K lm lm/W max. W 4H-8H lm lm/W max. W 4H-8H ° Ra595x595 mm – Without driverFP2-6060-38-830-ND 567781 warm white 3000 3000 125 24 20 4300 116 38 22 113 80 FP2-6060-38-840-ND 567782 neutral white 4000 3000 125 24 20 4300 116 38 22 113 80 FP2-6060-38-865-ND 567783 cold white 6500 3000 125 24 20 4300 116 38 22 113 80

620x620 mm – Without driverFP2-6262-38-830-ND 567784 warm white 3000 3000 125 24 20 4400 117 38 22 113 80 FP2-6262-38-840-ND 567785 neutral white 4000 3000 125 24 20 4400 117 38 22 113 80 FP2-6262-38-865-ND 567786 cold white 6500 3000 125 24 20 4400 117 38 22 113 80

1195x295 mm – Without driverFP2-12030-38-830-ND 567787 warm white 3000 2700 115 24 20 4100 112 38 22 113 80 FP2-12030-38-840-ND 567788 neutral white 4000 2700 115 24 20 4100 112 38 22 113 80 FP2-12030-38-865-ND 567789 cold white 6500 2700 115 24 20 4100 112 38 22 113 80

* Production tolerance of luminous flux and power consumption: ±10% | ** with driver K33.1

UGR19 version – without driverLow glare, especially suitable for office illumination

Type Ref. No. Colour Correlated Typ. luminous flux* and efficiency, power consumption and typ. UGR Beam Typ. CRIcolour temp. 700 mA** Typ. UGR 1050 mA** Typ. UGR angle

K lm lm/W max. W 4H-8H lm lm/W max. W 4H-8H ° Ra595x595 mm – Without driverFP2-6060-38-830-U-ND 567790 warm white 3000 2700 112 24 17 4000 110 38 19 84 80 FP2-6060-38-840-U-ND 567791 neutral white 4000 2700 112 24 17 4000 110 38 19 84 80 FP2-6060-38-865-U-ND 567792 cold white 6500 2700 112 24 17 4000 110 38 19 84 80

620x620 mm – Without driverFP2-6262-38-830-U-ND 567793 warm white 3000 2700 112 24 17 4200 110 38 19 84 80 FP2-6262-38-840-U-ND 567794 neutral white 4000 2700 112 24 17 4200 110 38 19 84 80 FP2-6262-38-865-U-ND 567795 cold white 6500 2700 112 24 17 4200 110 38 19 84 80

1195x295 mm – Without driverFP2-12030-38-830-U-ND 567796 warm white 3000 2400 100 24 17 3800 100 38 19 84 80 FP2-12030-38-840-U-ND 567797 neutral white 4000 2400 100 24 17 3800 100 38 19 84 80 FP2-12030-38-865-U-ND 567798 cold white 6500 2400 100 24 17 3800 100 38 19 84 80

* Production tolerance of luminous flux and power consumption: ±10% | ** with driver K33.1




LED

-Lum

inai

re_F

lat-P

anel

-Gen

-2_E

N –

5/

8 –

04/

2018


LED Constant Current Drivers for LED FlatPanel Gen. 2

Max. output Ref. No. Version Output current Output voltage DC Casing Dimensions Max. service lifetime/casing temperatureW mA V LxBxH (mm) Std. tc (°C)

PrimeLine24 186465 DALI/PUSH 350 14–34 K2.1 103.6 x 67.4 x 31 100,000 65

186573 500

186574 70037 186503 DALI/PUSH 350 30–53 K3.2 123.4 x 79.4 x 32.6 100,000 65

186571 500

186572 70038 186763 DALI/PUSH 1050 10–36 K33.3 146.5x43.2x30x1 100,000 75

ComfortLine24 186279 1–10 V 700 14–34 K2.1 103.6 x 67.4 x 31 100,000 6522 186684 on/off 400–500 25–43 K33 169 x 43 x 30 6030 186685 600–700 6539 186686 800–900 7045 186687 950–1050 70

EasyLine28.5 186531 on/off 500 25–57 K2.1 103.6 x 67.4 x 31 50,000 7034.2 600

40 700

34.4 186532 800 25–4339.8 925

45 1050

32 186723 on/off 700 15–45 K33.2 146.5x43.5x30 50,000 6538 186725 900 15–4242 186727 1050 15–40



LED

-Lum

inai

re_F

lat-P

anel

-Gen

-2_E

N –

6/

8 –

04/

2018

LED FlatPanel Gen. 2 – AccessoriesAssembly kit for suspension versionConsisting of• 4 fixation brackets, incl. screws• 6 screws M3, incl. pegs• 4 steel cables with snap hooks• 2 steel cables for suspension with

adjustment elementMinimum order quantity: 1 pcs.Ref. No.: 565559

Mounting clipsRef. No.: 567818 4 steel clipsRef. No.: 567819 6 steel clips

Surface mounting framesMaterial: Colour: RAL 9003, whiteMagnetic catchType: 6060Ref. No.: 567820 For LED FlatPanel 595x595 mmType: 6262Ref. No.: 567821 For LED FlatPanel 620x620 mmType: 12030Ref. No.: 567822 For LED FlatPanel 1195x295 mm




LED

-Lum

inai

re_F

lat-P

anel

-Gen

-2_E

N –

7/

8 –

04/

2018


LED FlatPanel Gen. 2 Comparison with Compact Fluorescent Lamps

Type LED Fluorescent

Service lifetime 50,000 hrs. 10,000 hrs.

FlatPanel Gen. 2 24 W 3 x 18 W or 3 x 14 W

FlatPanel Gen. 2 38 W 4 x 18 W or 4 x 14 W

Safety and assembly information for LED drivers

Electrical installation• Connection terminals: Push-in terminals for rigid or flexible

conductors with a section of 0.2–1.5 mm²• Stripped length: 8.5–10 mm• Wiring: The mains conductor within the luminaire must

be kept short (to reduce the induction of interference). Mains and lamp conductors must be kept separate and if possible should not be laid in parallel to one another. Max. secondary side lead length: 0.8 m

• Polarity: Please ensure the correct polarity of the leads prior to commissioning. Reversed polarity can destroy the modules.

• Through-wiring: Is not allowed.• Parallel wiring: Parallel connection of LED loads is not

allowed.• Wiring diagram:

Selection of automatic cut-outs for VS LED drivers• Dimensioning automatic cut-outs

High transient currents occur when an LED driver is switched on because the capacitors have to load. Ignition of LED modules occurs almost simultaneously. This also causes a simultaneous high demand for power. These high currents when the system is switched on put a strain on the automatic conductor cut-outs. which must be selected and dimensioned to suit.

• Release reaction The release reaction of the automatic conductor cut-outs comply with VDE 0641. part 11. for B. C characteristics. The values shown in the following tables are for guidance purposes only and are subject to system-dependent change.

• No. of LED drivers The maximum number of VS LED drivers applies to cases where the devices are switched on simultaneously. Specifications apply to single-pole fuses. The number of permissible drivers must be reduced by 20% for multi-pole fuses. The considered circuit impe-dance equals 400 mΩ (approx. 20 m [2.5 mm²] of conductor from the power supply to the distributor and a further 15 m to the luminaire).

Type Ref. No. Automatic cut-out type and possible no.of VS drivers

pcs.

Automatic cut-out type B 10 A B 13 A B 16 A C 10 A C 13 A C 16 AECXe 500.242 186651 14 18 23 24 31 38ECXe 600.255 186671 14 18 22 23 31 38ECXe 700.243 186652 14 18 22 23 31 38ECXe 800.254 186670 14 18 22 23 31 38ECXe 900.244 186653 13 18 22 23 30 37ECXe 1050.245 186654 14 18 23 24 31 38

– To limit capacitive inrush currents the current carrying capacity of each circuit breaker (fuse) can be increased by a factor of 2.5 with the help of our ESB-6K (Ref. No.: 149820) or ESB-16HS (Ref. No.: 149821) inrush current limiters.



LED

-Lum

inai

re_F

lat-P

anel

-Gen

-2_E

N –

8/

8 –

04/

2018

LED FlatPanel Gen. 2 – Safety and Installation InstructionsGeneral safety and installation Instructions for luminairesThe following instructions must be observed. Non-observance can result in personal injury and damage to property or can damage both luminaires and control gear. In such cases, the manufacturer's warranty as well as liability will be invalidated.

General Instructions• Please read these instructions prior to installation/commissioning

and keep them safe for future use.• Any improper use or modification will invalidate the manufacturer's

warranty and liability as well as any warranty claims.• The luminaire contains integrated and non-exchangeable LED light

sources.• Care must be taken to ensure the luminaire is operated only using

the supplied Vossloh-Schwabe control gear and accessories or using an alternative brand of approved control gear.

• Children must be prevented from playing with or near the luminaire.

Installation and operating instructions• Installation of this luminaire may be undertaken only by authorised

and suitably trained staff in accordance with any country-specific regulations.

• Installation must be carried out only after disconnecting the device from mains voltage, i.e. in a voltage-free state.

• Depending on the site of operation, the degree of protection (IPxx) will have to be observed during installation.

• Please ensure that the correct supply voltage is applied by checking it against the voltage requirements of the luminaire and the driver.

• For the purpose of commissioning, please ensure the correct polarity of the connecting leads. Incorrect polarity can destroy the modules.

• For trouble-free operation, it is important to ensure that the permissible ambient temperature range ta as stipulated in the datasheet is not exceeded. Exposure to sunlight can increase the ambient temperature.

• Only ever operate the luminaire with all protective covers in place.• Given functional problems, please contact your Vossloh-Schwabe

representative. Should the power supply cable be damaged, please scrap the luminaire and/or contact your VS representative.

• On contact with moisture or condensation, any resulting corrosive damage will not be recognised as a product flaw or manufacturer’s defect.

• Connecting luminaires (LED modules) to supply units that are already connected to the mains can result in long-term damage. Secondary switching is not permissible.

• Touchable luminaire parts can reach high temperatures (risk of burning/injury.)

• Highly flammable materials (e.g. cladding or insulation material) must be kept away from the luminaire.

• Please ensure protective ESD (electrostatic discharge) measures are taken when handling and installing the luminaire – see VS "ESD Protection" application notes.

• Measurement tolerances: – Luminous flux: ± 10% – Power consumption / voltage: ± 10 % – Colour: max. 5 SDCM

Cleaning instructions• Depending on the conditions on site, the luminaire must be cleaned

on a regular basis.• Never use any flammable, abrasive, harsh or corrosive cleaning

liquids.• Prior to cleaning the luminaire, please ensure it is disconnected from

the mains and is given time to cool down.• Once it has cooled down, the luminaire can be cleaned with a

damp cloth.• Let the luminaire dry fully before switching it back on.

Answers to technical questions can be found on our website at www.vossloh-schwabe.com or ask your Vossloh-Schwabe representative.

Safety symbols Specifies the minimum clearance to flammable materials

in the direction of radiation.

Indoor operation

Please ensure that the way the luminaire is positioned means there is no reason to expect anyone could look

into it for a longer period of time with less clearance than stated in the datasheet.

Caution: risk of electric shock.

Caution: components with a risk of electrostatic charge.

Luminaire/voltage supply unit must not be covered with any thermally insulating materials or similar.

Any cover with damage must be replaced.

Product guarantee• 5 years• The conditions for the Product Guarantee of the Vossloh-Schwabe

Group shall apply as published on our homepage (www.vossloh-schwabe.com). We will be happy to send you these conditions upon request.


VS OUTDOOR LIGHTING


LED WATERPROOF LINEAR GEN.2Flat wet room lightThe use of state-of-the-art LED technology in conventional outdoor illu-mination provides a lot of advantages like an optimal light distribution and an increased lifetime all at an affordable price. The LED Water-proof Linear is fully compatible with existing conventional lighting infrastructure, and are the perfect choice for both new and replace-ment markets.

LED WATERPROOF LINEAR GEN. 2• Incl. integrated LED driver• High efficiency of up to 135 lm/W• High colour rendering index CRI: ≥ 80• Fast and easy installation: ceiling, suspended

or on surface.a

LED Waterproof Linear

LED WATERPROOF LINEAR GEN. 2FLAT WET ROOM LIGHT

LED Waterproof Linear Gen. 2

LONG SERVICE LIFE TIME: up to 70,000 hrs.

100 % INSTANT LIGHT

INTEGRATED LED DRIVER

5 YEARS GUARANTEE

IP66IP66 IK08



LED

-Lum

inai

re_W

ater

proo

f-Lin

earG

en2_

EN –

2/

4 –

09/

2018

L = 1200 or 1500 mm


LED WaterproofLinear Gen. 2Dimensions LxWxH: 1200x75x67 mm or 1500x75x67mm Standard colour of end cap: grey (RAL 9007)Other colors availableOperational temperature: –25 to 35 °CWith integrated LED driverFor mains voltage: 220–240 V, 50–60 Hz Available options: CLO, Dali, Blu2Light, Emergency Kit, through wiring

Comfort LR3

Easy LR10



LED

-Lum

inai

re_W

ater

proo

f-Lin

earG

en2_

EN –

3/

4 –

09/

2018


With driver DALI:

With driver on/off:

Prime LR3



LED

-Lum

inai

re_W

ater

proo

f-Lin

earG

en2_

EN –

4/

4 –

09/

2018


LED Waterproof Linear – Installation InstructionGeneral safety information • VS product may only be installed and commissioned by authorised and fully qualified staff.• These instructions must be carefully read before installing and commissioning the system,

as this is the only way to ensure safe and correct handling.• Before any work is carried out on the equipment, it must be disconnected from the mains.• All valid safety and accident-prevention regulations must be observed.• The products should never be inexpertly opened as this poses lethal danger due to electrical shock.

Repairs may only be undertaken by the manufacturer.• The photo biological safety of the LED modules is classified into risk groups in accordance with EN 62471: 2008

and IEC TR 62778: risk group 1.• In case of broken glass please switch-off mains (220–240 V) and have a qualified staff replace the complete luminaire.


LEDLine Flex SMD IP67

LEDLINE FLEX SMD IP67

LEDLINE FLEX SMD IP67WU-M-616-IP67 / 10 W/m (> 900 lm/m)

Typical Applications• Illumination of complex structures

subject to high levels of moisture or dust• Marking paths, stairs, etc.• Furniture lighting• Light advertising• Entertainment, shop design• Architectural illumination


FLEXIBLE 24 V CONSTANT-VOLTAGE SMD STRIPE (SELV)with low mounting height

IP67 PROTECTEDagainst high moisture and dust

DIMMABLE

SELF-ADHESIVE 3M TAPE AT THE BACKSIDEfor simple mounting on different surfaces

FREEDOM OF DESIGNthanks to cut options in 100 mm steps

EFFICIENCY: UP TO 100 LM/W

THREE DIFFERENT COLOUR TEMPERATURES3000 K, 4000 K, 5700 K

SERVICE LIFETIME: 30,000 H (L70/B50)

INVERSE-POLARITY PROTECTION



LED

-Mod

ule_

LED

Line-

Flex

_SM

D_W

U-M

-616

_IP6

7_EN

– 2

/4

– 04

/20

18LEDLine Flex SMD IP67

LEDLine Flex SMD IP67Technical Notes• Extremely flexible encapsulated SMD line module• Degree of protection: IP67• Encapsulated dimensions (see drawing)

PCB 5000 mm: A = 5030 ±20 mm• With 300 SMDs divisible in 50 single-steps

(100 mm à 6 SMDs)• Low LED pitch: 16.7 mm

for homogeneous light distribution• Minimum heat developement• Wide beam angle (120°)• Voltage supply: 24 V DC• Soldered wires on one side: 500 ±10 mm

Electrical Characteristicsat tp = 25 °C

Type Ref. No. Colour Step length Number of LEDs/m Forward current* Forward voltage DC* Power*mm mA/m V W/m

WU-M-616-830 567891 warm white 100 60 420 24 10WU-M-616-840 567892 neutral white 100 60 420 24 10WU-M-616-857 567893 cold white 100 60 420 24 10

* On account of the complex manufacturing process of the modules, the above values only represent statistical variables. The values do not necessarily correspond exactly to the actual parameters of every single product, which can vary from the typical specification.

Maximum RatingsExceeding the maximum ratings can lead to reduction of service life or destruction of the module.

Type Voltage DC* Operation temperature range at tc point Ambient temperature range for operation Storage temperature range

V min. V max. °C min. °C max. °C min. °C max. °C min. °C max.

All types 22.8 25.2 –10 +50 –10 +40 +20 +60

Optical Characteristicsat tp = 25 °C

Type Ref. No. Colour Colour temperature** Luminous flux* (lm/m) Beam angle* CRIK min. typ. ° Ra

WU-M-616-830 567891 warm white 3000 770 900 120 > 80WU-M-616-840 567892 neutral white 4000 850 1000 120 > 80WU-M-616-857 563893 cold white 5000 850 1000 120 > 80

* On account of the complex manufacturing process of the modules, the above values only represent statistical variables. The values do not necessarily correspond exactly to the actual parameters of every single product, which can vary from the typical specification.** Colour tolerance: 3 SDCM; colour measurement tolerance: ± 10% |



LED

-Mod

ule_

LED

Line-

Flex

_SM

D_W

U-M

-616

_IP6

7_EN

– 3

/4

– 04

/20

18LEDLine Flex SMD IP67

LEDLine Flex SMD IP67Light Distribution Curves Mechanical Dimensions

BinsColour coordinates and tolerances acc. to CIE 1931. The specified colour coordinates are measured integral (td ≤ 120 ms) at ta = 25 °C.

Center coordinates of MacAdam ellipse: 3 SDCM

Type CCT X0* Y0*

3000 K

4000 K

5700 K

* measurement tolerance of colour coordinates: ± 0.01

Recommended connector3M Scotchlok Outdoor connector UR2Humidity resistant connector filled with sealantStrand diameter: 0.4–0.9 mmRef. No.: 534992

End capRef. No.:

Sealing glueRef. No.:

LED Constant-voltage Converters 24 VYou will find more information about our LED drivers on our website: www.vossloh-schwabe.com

Max. Mains voltage Output Ref. No. Version Max. service Service Connection Casing Dimensions Quantity of LEDLine Flexoutput 50–60 Hz current life time life time LxWxH modules per converter*

W V ±10% A hrs. at °C mm

IP67 WU-M-616150 220–240 0–6.25 186434 EasyLine 50.000 70 Preassembled leads M58.1 206x68.6x37 3x

200 220–240 0–8.3 186634 EasyLine 50.000 85 Preassembled leads M58.1 206x68.6x37 4xPlease ensure you choose the correct LED converter for the modules in question and that the respective output parameters (current, voltage, wattage) are correct.* Note: Only parallel drive circuits ensure a safe operation. Serial connection must be avoided.



LED

-Mod

ule_

LED

Line-

Flex

_SM

D_W

U-M

-616

_IP6

7_EN

– 4

/4

– 04

/20

18

LEDLine Flex SMD IP67Assembly and Safety InformationInstallation must be carried out under observation of the relevantregulations and standards. The LED modules are designed for operation within a casing or luminaire. Installation must be carried out in avoltage-free state (i.e. disconnection from the mains). The followingadvice must be observed; non-observance can result in the destructionof the LED assembly modules, fire and/or other hazards.• The LEDLine Flex SMD must be operated with a constant-voltage

(CV) LED converter.• Operation only with power supply units that feature the following

protection: – Short-circuit protection – Overload protection – Overheating protection – SELV (Safety Extra Low Voltage)

• The maximum output of the power supply must be observed.• Exceeding the max. operating voltage (see table on page 2) leads

to an overload on the LED module. This may result in a reduction of service life or even destroy the LED module.

• LED modules and all PCB components must not be subjected to any undue mechanical stress.

• The LEDLine Flex modules must not be operated in rolled-up conditions.

• The circuit path must not be damaged or interrupted.• Please ensure standard ESD (electrostatic discharge) protection

measures are employed when handling and installing LED modules. Electrostatic discharge can damage LEDs.

• Expected lifetime: 30,000 h (L70/B50) at tp = 45 °C• Each LEDLine Flex SMD IP67 is backed by adhesive tape (3M

Adhesive Tape Type 200MP) for easy assembly. Please observe the manufacturer's technical data provided at www.3M.com/converter. Products equipped with adhesive transfer tape must only be applied to dry and clean surfaces that are free from grease, oil, silicone or other soiling. It is therefore recommended to clean the substrate with isopropyl alcohol (IPA). Please ensure a fullsurface bond over the entire contact area when sticking the module to the substrate.

• The following substances are regarded as critical for creating an adhesive bond: – Polyefins (polyethylene, polypropylene) – Rubber – Powder-coated materials – Silicone rubber – Teflon

For optimum adhesive bonding, a temperature of approx. 25 °Cshould be ensured during installation. In addition, firm pressure must be exerted on the LEDLine Flex tape (but NOT on the SMD components or solder parts).

• Owing to the varying application options and different types of surface as well as ambient conditions, VS accepts no liability for the quality of the adhesive bond achieved when mounting these products. Prior to sticking a VS product care must be taken to check whether the material in question is actually suitable for the intended purpose under consideration of all possible application-relevant influences. Supplementary holders must be used if necessary.

• The product must be stored no longer than 12 months (in packed condition) at approx. 20 °C and up to 50% relative humidity in order to ensure optimal bonding.

• Storage conditions for LEDine Flex SMD IP67 modules must remain within a temperature range of –20 °C to +60 °C.

• Contacts are created by soldering the leads onto the soldering pads (labelled 24 V ±). The soldering temperature must not exceed • °C. The max. soldering time is • seconds.

• During installation the bending radius must not fall below 60 mm. On sharp edges the LEDLine Flex SMD IP67 may only be bent at a position where no electronic components or solder parts are mounted. The module can be damaged if it is bent in a crosswise or twisted direction (prevent shear or pull-off forces).

• LEDLine Flex modules are suitable only for mounting on rigid and so-lid surfaces. The module must not be mounted on flexible substrates as the LED module would be damaged when the substrate bends.

• LEDLine Flex IP67 modules must bei installed, handeld and bent at a module temperature of between 10 °C to 40 °C.

• The LEDLine Flex SMD IP67 is designed in that way, that the PCB can be carefully separated at every 100 mm step using a pair of scissors or a cutter knife (along the marked line in the middle of the connection pads between two single steps; see drawing on page 3). NOTE: Although all accessories offered by VS have been specifically designed for the LEDLine Flex SMD IP67 modules, and if properly applied, they will meet the IP67 requirements, VS will not be liable for damage caused by moisture and corrosion after the LED module has been cut.

Product Guarantee• 5 years*• The conditions for the Product Guarantee of the Vossloh-Schwabe

Group shall apply as published on our homepage (www.vossloh-schwabe.com). We will be happy to send you these conditions upon request.

* at max. operating temperature of 30 °C


VS LED EMERGENCY KITS

vs indoor li ghti ng · 2019. 10. 29. · 3306 zeptrion 25–420 universal dim ok (3 to 6 lamps)...

Documents