8/3/2019 Ventilador DAYTON3

http://slidepdf.com/reader/full/ventilador-dayton3 1/2

Features

• PSC motor

• Baked enamel Gray finish

• Heavy gauge steel housing

• All position Mounting

• Maximum Ambient Temperature

104°F

• Suitable for 50Hz operation

Additional Benefits

• Permanently Lubricated Ball-Bearings

• Extruded Aluminum Blower Frame

for Increased Rigidity

• Auto-Thermal Protection

Dayton® PSC andShaded Pole Blowers

Specification Sheet 1TDR8

Description

Dayton PSC and Shaded Pole blowers provide economical air delivery for general

heating, cooling, ventilating, or component cooling. Typical applications include

cooling greenhouses, blowers for wood and corn stoves, ventilating small buildings,

cooling electrical enclosures and removing heat from machinery. The blowers

are exact replacements for many OEM blowers with the same physical footprint.

Forward curve wheels driven by Dayton motors are rated for continuous duty

with all-position mount. These units incorporate balanced ball or sleeve-bearing

motors with cast aluminum end shields. This provides greater heat dissipation

and protection, reducing down time due to component failure and accidentaldamage. Direct drive blower wheels are dynamically balanced to reduce noise

and vibration and to maintain CFM at higher static pressures.

Dimensions

in. (mm)

1TDR8* 358 350 330 310 300 280 258 235 180 230 0.54 60

ReferenceNumber CFM @0″ 0.1″ 0.2″ 0.3″ 0.4″ 0.5″ 0.6″ 0.7″ 0.8″ VOLTS AMPS HZ

* Replaces 2C917

NOTE: Includes Conduit Box with 12″ Lead Length.

NOTE: Not suitable for use with speed-controlled devices.

   1   1 .   1   6   4

   (   2   8   3

 .   5   6   )

10.436(265.07)

Ø5.358(136.00)

7.480(190)

   Ø   4 .   4   5

   2

   (   1   1   3 .   0

   0   )

   4 .   1

   5   4   (   1   0   5 .   5

   )

3.858(98)

   5 .   6

   3   0   (   1   4   3   )

Specifications

0 2.26 4.53 6.8 9.06 11.33

0 80 160 240 320 400

(CMM

(CFM)

(inwg) (MMAq)

60HZ

1.2

0.96

0.72

0.48

0.24

0

30.48

24.38

18.29

12.18

6.10

0

Ø0.280(7.1)

5.079 (129)

4.488 (144)

   1   1 .

   8   2   3

   (   3   0   0

 .   3   1   )

   5 .   0

   0   0   (   1   2   7   )

CAP

E47479Motor Component Recognition

8/3/2019 Ventilador DAYTON3

http://slidepdf.com/reader/full/ventilador-dayton3 2/2

Specification Sheet

Manufactured for Dayton Electric Mfg. Co.Niles, Illinois 60714 U.S.A.

1TDR8

DISCLAIMER. Dayton has made a diligent effort to provide product information and illustrate the products in this literature

accurately; however, such information and illustrations are for the sole purpose of identification, and do not express or imply 

a warranty that the products are MERCHANTABLE, or FIT FOR A PARTICULAR PURPOSE, or that the products will necessarily conform to the illustrations or descriptions.

PRODUCT SUITABILITY. Many jurisdictions and localities have codes and regulations governing sales, construction,

installation, and/or use of products for certain purposes, which may vary from those in neighboring areas. While Dayton

attempts to assure that its products comply with such codes, it cannot guarantee compliance, and cannot be responsible

for how the product is installed or used. Before purchase and use of a product, review the product applications, and all 

applicable national and local codes and regulations, and be sure that the product, installation, and use will comply with them.

Dayton® PSC and Shaded PoleBlowers

Notes

Mark: Submitted By:

Project: Date:

Location: