using enercon scada for wec monitoring -...
TRANSCRIPT
Using ENERCON SCADA For WEC Monitoring
CanWEA O&M Summit 2016
Toronto – February 24 – 25
Ismael Touani ENERCON Services Canada
© Copyright ENERCON GmbH. All rights reserved. (name of the presenter) 2
Agenda
1 ENERCON SCADA System
2 ENERCON SCADA Remote 3
3 ENERCON Condition Monitoring System (CMS)
4 ENERCON Service Process
© Copyright ENERCON GmbH. All rights reserved. (name of the presenter) 3
Agenda
1 ENERCON SCADA System
© Copyright ENERCON GmbH. All rights reserved. (name of the presenter) 4
SCADA Server
Outside – Wind Farm
Inside – Wind Farm
Communication Network
SCADA Remote
Grid Operator
ENERCON Service
Customer
Central, mandatory system in every Wind Farm Historical Data: WEC + Wind Farm level Remote access via ENERCON SCADA Remote Service Info Portal (SIP)
SCADA Server
ENERCON SCADA System
© Copyright ENERCON GmbH. All rights reserved. (name of the presenter) 5
Can integrate meteorological mast into ENERCON SCADA System Various sensors (to be defined project-specifically) Refresh rate about 1s Power supply possible via WEC
Key characteristics
Peripheral unit: ENERCON meteo
© Copyright ENERCON GmbH. All rights reserved. (name of the presenter) 6
Agenda
2 ENERCON SCADA Remote 3
© Copyright ENERCON GmbH. All rights reserved. (name of the presenter) 7
Accessing raw data (up to 10-minute data) from ENERCON SCADA Server Visualising data
• Tabular • Diagrams
Reporting WEC start/stop possible (optional)
Features
ENERCON SCADA Remote 3
© Copyright ENERCON GmbH. All rights reserved. (name of the presenter) 8
Online data
ENERCON SCADA Remote 3
© Copyright ENERCON GmbH. All rights reserved. (name of the presenter) 9
Data analysis
ENERCON SCADA Remote 3
© Copyright ENERCON GmbH. All rights reserved. (name of the presenter) 10
Raw data and reports
ENERCON SCADA Remote 3
© Copyright ENERCON GmbH. All rights reserved. (name of the presenter) 11
Agenda
3 ENERCON Condition Monitoring System (CMS)
© Copyright ENERCON GmbH. All rights reserved. (name of the presenter) 12
Monitoring of wind energy converters during operation Integrated directly into each wind energy converter control system Ensure safe operation control of the WECs The control system issues status messages if sensor signals exceed limits Messages available via ENERCON SCADA Remote
ENERCON Condition Monitoring System (CMS)
Key characteristics
© Copyright ENERCON GmbH. All rights reserved. (name of the presenter) 13
Agenda
4 ENERCON Service Process
© Copyright ENERCON GmbH. All rights reserved. (name of the presenter) 14
Canada
Germany
24h/7 monitoring from Canada and Germany for all WECs installed in Canada
ENERCON Service Process
© Copyright ENERCON GmbH. All rights reserved. (name of the presenter) 15
WEC Fault/Warning Network
ENERCON Service Process
ENERCON Service
Network
Reset status? Parameters?
© Copyright ENERCON GmbH. All rights reserved. (name of the presenter) 16
ENERCON Service Process
Teams Open orders
Deployment scheduling - ClickSchedule
Technical assistance - SAP R/3
Service Cockpit
Maintenance Planning
Other sources ...
Material, Working hours
Status
WEC Fault/Warning
Field Service - MAM
Orders
Defects/Damage
Order
Network
Network
+ open defects/damage