product portfolio - enercon · shadow shutdown x enercon scada bat protection x statcom x inertia...
TRANSCRIPT
InhaltE-44 2E-48 4E-53 6E-70 E4 8E-82 E2 10E-82 E4 12E-92 14E-103 16E-101 18E-115 20E-115 EP3 22E-126 EP3 24E-138 EP3 26L136 28L147 30L160 32
PRODUCT PORTFOLIO TECHNICAL DATA SHEETS (LAST UPDATED 05/2019)
ENERCON
EP5 E-136 EP5 E-147 EP5 E2 E-160 EP5
EP3 E-115 EP3
E-126 EP3
E-138 EP3
E-115 E-101
EP2 E-82 E4 E-92 E-103 E-70 E-82 E2
EP1 E-44 E-48 E-53
www.enercon.de
IEC/EN IA (STRONG)IEC/EN IIA (MEDIUM)
IEC/EN IIIA (LOW)
E-44900 kW
www.enercon.de
500
1,500
2,000
1,000
2,500
3,500
4,000
4,500
5,000
5,500
3,000
MWh per year
Average wind speed at hub height (m/s)
6.7 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 8.5 8.7 8.9 9.1 9.3 9.5 9.7 9.9 10.0
E-44 / 900 kW
* dependent on hub height
GENERAL Nominal power 900 kWWind class (IEC) IEC IAWind zone (DIBt) WZ 4 GK I Turbine concept gearless, variable speed, full power converterDesign service life 20 yearsCut in wind speed 2.5 m/sCut out wind speed 34 m/sExtreme wind speedat hub height (3-second gust) 70 m/s Rotational speed 14.0 - 33.1 rpm Ambient temperaturefor normal operation -10 °C to +40 °CExtreme temperature range -20 °C to +50 °CGrid feed /control system ENERCON inverterGrid frequency 50 Hz / 60 HzSound power level 100.7 - 103.0 dB(A)* Yield and noise-optimised operation. Further modes on request.
ROTORRotor diameter 44 mSwept area 1,521 m²Type upwind rotor with active pitch control
TOWERHub height IEC IA IEC IIA IEC IIIA 45 m 55 m
GENERATORType directly driven, separately excited annular generatorCooling system air cooling system
FEATURES STANDARD OPTIONALFACTS and transmission XENERCON SCADA XENERCON storm control XIce detection system XPower curve method
Low radar reflectivity rotor blades XAdditional ice detection system X Blade heating system X Hot-Climate X Shadow shutdown X ENERCON SCADA bat protection X STATCOM X Inertia Emulation X Sector management for wind farms X Beacon management for wind farms X
ANNUAL ENERGY YIELD
TECHNICAL DATA
E-44Last updated: 05/2019. Technical information subject to change.
E-48800 kW
www.enercon.de
500
1,500
2,000
1,000
2,500
3,500
4,000
4,500
5,000
5,500
3,000
MWh per year
Average wind speed at hub height (m/s)
5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 8.5
E-48 / 800 kW
* dependent on hub height
GENERAL Nominal power 800 kWWind class (IEC) IEC IIAWind zone (DIBt) WZ III Turbine concept gearless, variable speed, full power converterDesign service life 20 yearsCut in wind speed 2.5 m/sCut out wind speed 34 m/sExtreme wind speedat hub height (3-second gust) 59.5 m/s Rotational speed 11.0 - 29.8 rpm Ambient temperaturefor normal operation -10 °C to +40 °CExtreme temperature range -20 °C to +50 °CGrid feed /control system ENERCON inverterGrid frequency 50 Hz / 60 HzSound power level 89.0 - 102.5 dB(A)* Yield and noise-optimised operation. Further modes on request.
ROTORRotor diameter 48 mSwept area 1,810 m²Type upwind rotor with active pitch control
TOWERHub height IEC IA IEC IIA IEC IIIA 50 m 56 m 60 m
GENERATORType directly driven, separately excited annular generatorCooling system air cooling system
FEATURES STANDARD OPTIONALFACTS and transmission XENERCON SCADA XENERCON storm control XIce detection system XPower curve method
Low radar reflectivity rotor blades XAdditional ice detection system X Blade heating system X Hot-Climate X Shadow shutdown X ENERCON SCADA bat protection X STATCOM X Inertia Emulation X Sector management for wind farms X Beacon management for wind farms X
ANNUAL ENERGY YIELD
TECHNICAL DATA
E-48Last updated: 05/2019. Technical information subject to change.
E-53800 kW
www.enercon.de
500
1,500
2,000
1,000
2,500
3,500
4,000
4,500
5,000
5,500
3,000
MWh per year
Average wind speed at hub height (m/s)
5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 8.5
E-53 / 800 kW
* dependent on hub height
GENERAL Nominal power 800 kWWind class (IEC) IEC SAWind zone (DIBt) WZ II exp. / WZ 3 GK I / WZ 4 GK II Turbine concept gearless, variable speed, full power converterDesign service life 20 yearsCut in wind speed 2.5 m/sCut out wind speed 34 m/sExtreme wind speedat hub height (3-second gust) 57 m/s (HH 60 / 73 m) 55 m/s (HH 50 m)Rotational speed 10.0 - 27.7 rpm Ambient temperaturefor normal operation -10 °C to +40 °CExtreme temperature range -20 °C to +50 °CGrid feed /control system ENERCON inverterGrid frequency 50 Hz / 60 HzSound power level 87.3 - 102.5 dB(A)* Yield and noise-optimised operation. Further modes on request.
ROTORRotor diameter 52.9 mSwept area 2,198 m²Type upwind rotor with active pitch control
TOWERHub height IEC IA IEC IIA IEC IIIA 50 m 60 m 73 m
GENERATORType directly driven, separately excited annular generatorCooling system air cooling system
FEATURES STANDARD OPTIONALFACTS and transmission XENERCON SCADA XENERCON storm control XIce detection system XPower curve method
Low radar reflectivity rotor blades XAdditional ice detection system X Blade heating system X Hot-Climate X Shadow shutdown X ENERCON SCADA bat protection X STATCOM X Inertia Emulation X Sector management for wind farms X Beacon management for wind farms X
ANNUAL ENERGY YIELD
TECHNICAL DATA
E-53Last updated: 05/2019. Technical information subject to change.
E-70 E42,300 kW
www.enercon.de
1,000
3,000
4,000
2,000
5,000
7,000
8,000
9,000
10,000
11,000
6,000
MWh per year
Average wind speed at hub height (m/s)
6.7 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 8.5 8.7 8.9 9.1 9.3 9.5 9.7 9.9 10.0
E-70 E4 / 2,300 kW
* dependent on hub height
GENERAL Nominal power 2,300 kWWind class (IEC) IEC IA and IEC IIAWind zone (DIBt) WZ III / WZ 4 GK I Turbine concept gearless, variable speed, full power converterDesign service life 20 yearsCut in wind speed 2.5 m/sCut out wind speed 34 m/sExtreme wind speedat hub height (3-second gust) 59.5 m/s (IEC IIA) 70 m/s (IEC IA)Rotational speed 6.0 - 20.5 rpm Ambient temperaturefor normal operation -10 °C to +40 °CExtreme temperature range -20 °C to +50 °CGrid feed /control system ENERCON inverterGrid frequency 50 Hz / 60 HzSound power level 93.6 - 104.5 dB(A)* (IEC IA) 94.1 - 104.5 dB(A)* (IEC IIA) Yield and noise-optimised operation. Further modes on request.
ROTORRotor diameter 71 mSwept area 3,959 m²Type upwind rotor with active pitch control
TOWERHub height IEC IA IEC IIA IEC IIIA 54 m 85 m 64 m 98 m 75 m
GENERATORType directly driven, separately excited annular generatorCooling system air cooling system
FEATURES STANDARD OPTIONALFACTS and transmission XENERCON SCADA XENERCON storm control XIce detection system XPower curve method
Low radar reflectivity rotor blades XAdditional ice detection system X Blade heating system X Hot-Climate X Shadow shutdown X ENERCON SCADA bat protection X STATCOM X Inertia Emulation X Sector management for wind farms X Beacon management for wind farms X
ANNUAL ENERGY YIELD
TECHNICAL DATA
E-70 E4Last updated: 05/2019. Technical information subject to change.
E-82 E22,000 kW / 2,300 kW
www.enercon.de
1,000
3,000
4,000
2,000
5,000
7,000
8,000
9,000
10,000
11,000
6,000
MWh per year
Average wind speed at hub height (m/s)
5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 8.5
E-82 E2 / 2,000 kW E-82 E2 / 2,300 kW
* dependent on hub height
GENERAL Nominal power 2,000 kW / 2,300 kWWind class (IEC) IEC IIAWind zone (DIBt) WZ 4 GK I Turbine concept gearless, variable speed, full power converterDesign service life 20 yearsCut in wind speed 2.5 m/sCut out wind speed 34 m/sExtreme wind speedat hub height (3-second gust) 59.5 m/sRotational speed 5.0 - 17.4 rpm (2,000 kW) 5.0 - 17.5 rpm (2,300 kW) Ambient temperaturefor normal operation -10 °C to +40 °CExtreme temperature range -20 °C to +50 °CGrid feed /control system ENERCON inverterGrid frequency 50 Hz / 60 HzSound power level 86.8 - 106.0 dB(A)* Yield and noise-optimised operation. Further modes on request.
ROTORRotor diameter 82 mSwept area 5,281 m²Type upwind rotor with active pitch control
TOWERHub height IEC IA IEC IIA IEC IIIA 78 m 84 m 85 m 98 m 108 m 138 m
GENERATORType directly driven, separately excited annular generatorCooling system air/water cooling system
FEATURES STANDARD OPTIONALFACTS and transmission XENERCON SCADA XENERCON storm control XLow radar reflectivity rotor blades XIce detection system XPower curve method
Additional ice detection system X Blade heating system X Hot-Climate X Shadow shutdown X ENERCON SCADA bat protection X STATCOM X Inertia Emulation X Sector management for wind farms X Beacon management for wind farms X
ANNUAL ENERGY YIELD
TECHNICAL DATA
E-82 E2Last updated: 05/2019. Technical information subject to change.
E-82 E42,350 kW / 3,000 kW
www.enercon.de
1,000
3,000
4,000
2,000
5,000
7,000
8,000
9,000
10,000
11,000
12,000
13,000
6,000
MWh per year
Average wind speed at hub height (m/s)
6.7 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 8.5 8.7 8.9 9.1 9.3 9.5 9.7 9.9 10.0
E-82 E4 / 2,350 kW E-82 E4 / 3,000 kW
* dependent on hub height
GENERAL Nominal power 2,350 kW / 3,000 kWWind class (IEC) IEC IA and IEC IIAWind zone (DIBt) WZ 4 GK I Turbine concept gearless, variable speed, full power converterDesign service life 25 yearsCut in wind speed 2.5 m/sCut out wind speed 34 m/sExtreme wind speedat hub height (3-second gust) 70 m/s (IEC IA) 59.5 m/s (IEC IIA)Rotational speed 5.0 - 17.5 rpmAmbient temperaturefor normal operation -10 °C to +40 °CExtreme temperature range -20 °C to +50 °CGrid feed /control system ENERCON inverterGrid frequency 50 Hz / 60 HzSound power level IEC IA: 87.4 - 104.0 dB(A)* (2,350 kW) 87.6 - 106.0 dB(A)* (3,000 kW) IEC IIA: 86.6 - 104.0 dB(A)* (2,350 kW) 86.8 - 106.0 dB(A)* (3,000 kW) Yield and noise-optimised operation. Further modes on request.
ROTORRotor diameter 82 mSwept area 5,281 m²Type upwind rotor with active pitch control
TOWERHub height IEC IA IEC IIA IEC IIIA 78 m 59 m 84 m 69 m
GENERATORType directly driven, separately excited annular generatorCooling system air/water cooling system
FEATURES STANDARD OPTIONALFACTS and transmission XENERCON SCADA XENERCON storm control XLow radar reflectivity rotor blades XIce detection system XPower curve method
Additional ice detection system X Blade heating system X Hot-Climate X Shadow shutdown X ENERCON SCADA bat protection X STATCOM X Inertia Emulation X Sector management for wind farms X Beacon management for wind farms X
ANNUAL ENERGY YIELD
TECHNICAL DATA
E-82 E4Last updated: 05/2019. Technical information subject to change.
E-922,350 kW
www.enercon.de
1,000
3,000
4,000
2,000
5,000
7,000
8,000
9,000
10,000
11,000
6,000
MWh per year
Average wind speed at hub height (m/s)
5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 8.5
E-92 / 2,000 kW E-92 / 2,350 kW
* dependent on hub height
GENERAL Nominal power 2,000 kW / 2,350 kWWind class (IEC) IEC IIAWind zone (DIBt) WZ 4 GK I + II Turbine concept gearless, variable speed, full power converterDesign service life 25 yearsCut in wind speed 2.5 m/sCut out wind speed 34 m/sExtreme wind speedat hub height (3-second gust) 59.5 m/sRotational speed 5.0 - 16.5 rpmAmbient temperaturefor normal operation -10 °C to +40 °CExtreme temperature range -20 °C to +50 °CGrid feed /control system ENERCON inverterGrid frequency 50 Hz / 60 HzSound power level 91.0 - 105.0 dB(A)* Yield and noise-optimised operation. Further modes on request.
ROTORRotor diameter 92 mSwept area 6,648 m²Type upwind rotor with active pitch control
TOWERHub height IEC IA IEC IIA IEC IIIA 69 m 78 m 84 m 85 m 98 m 104 m 108 m 138 m
GENERATORType directly driven, separately excited annular generatorCooling system air cooling system
FEATURES STANDARD OPTIONALFACTS and transmission XENERCON SCADA XENERCON storm control XLow radar reflectivity rotor blades XIce detection system XPower curve method
Additional ice detection system X Blade heating system X Hot-Climate X Shadow shutdown X ENERCON SCADA bat protection X STATCOM X Inertia Emulation X Sector management for wind farms X Beacon management for wind farms X
ANNUAL ENERGY YIELD
TECHNICAL DATA
E-92Last updated: 05/2019. Technical information subject to change.
E-1032,350 kW
www.enercon.de
E-103 / 2,000 kW
1,000
3,000
4,000
2,000
5,000
7,000
8,000
9,000
10,000
11,000
6,000
MWh per year
Average wind speed at hub height (m/s)
5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 8.5
E-103 / 2,350 kW
* dependent on hub height
GENERAL Nominal power 2,000 kW / 2,350 kWWind class (IEC) IEC IIIAWind zone (DIBt) WZ 2 GK I + II Turbine concept gearless, variable speed, full power converterDesign service life 25 yearsCut in wind speed 2.5 m/sCut out wind speed 34 m/sExtreme wind speedat hub height (3-second gust) 52.5 m/sRotational speed 4.8 - 14.4 rpm (2,000 kW) 4.8 - 14.6 rpm (2,300 kW)Ambient temperaturefor normal operation -10 °C to +40 °CExtreme temperature range -20 °C to +50 °CGrid feed /control system ENERCON inverterGrid frequency 50 Hz / 60 HzSound power level 90.5 - 105.0 dB(A)* Yield and noise-optimised operation. Further modes on request.
ROTORRotor diameter 103 mSwept area 8,332 m²Type upwind rotor with active pitch control
TOWERHub height IEC IA IEC IIA IEC IIIA 78 m 85 m 98 m 108 m 138 m
GENERATORType directly driven, separately excited annular generatorCooling system air cooling system
FEATURES STANDARD OPTIONALFACTS and transmission XENERCON SCADA XENERCON storm control XLow radar reflectivity rotor blades XIce detection system XPower curve method
Additional ice detection system X Blade heating system X Hot-Climate X Shadow shutdown X ENERCON SCADA bat protection X STATCOM X Inertia Emulation X Sector management for wind farms X Beacon management for wind farms X
ANNUAL ENERGY YIELD
TECHNICAL DATA
E-103Last updated: 05/2019. Technical information subject to change.
E-1013,050 kW
www.enercon.de
5,000
4,000
3,000
7,000
8,000
6,000
9,000
11,000
12,000
13,000
14,000
15,000
10,000
MWh per year
Average wind speed at hub height (m/s)
5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 8.5
E-101 / 3,050 kW
* dependent on hub height
GENERAL Nominal power 3,050 kWWind class (IEC) IEC IIAWind zone (DIBt) WZ III / WZ 4 GK ITurbine concept gearless, variable speed, full power converterDesign service life 20 yearsCut in wind speed 2.5 m/sCut out wind speed 34 m/sExtreme wind speedat hub height (3-second gust) 59.5 m/sRotational speed 4.8 - 14.2 rpmAmbient temperaturefor normal operation -10 °C to +40 °CExtreme temperature range -20 °C to +50 °CGrid feed /control system ENERCON inverterGrid frequency 50 Hz / 60 HzSound power level 87.5 - 104.5 dB(A)* Yield and noise-optimised operation. Further modes on request.
ROTORRotor diameter 101 mSwept area 8,012 m²Type upwind rotor with active pitch control
TOWERHub height IEC IA IEC IIA IEC IIIA 99 m 124 m 135 m 149 m
GENERATORType directly driven, separately excited annular generatorCooling system air/water cooling system
FEATURES STANDARD OPTIONALFACTS and transmission XENERCON SCADA XENERCON storm control XLow radar reflectivity rotor blades XIce detection system XPower curve method
Additional ice detection system X Blade heating system X Hot-Climate X Shadow shutdown X ENERCON SCADA bat protection X STATCOM X Inertia Emulation X Sector management for wind farms X Beacon management for wind farms X
ANNUAL ENERGY YIELD
TECHNICAL DATA
E-101Last updated: 05/2019. Technical information subject to change.
E-1153,000 kW / 3,200 kW
www.enercon.de
5,000
4,000
3,000
7,000
8,000
6,000
9,000
11,000
12,000
13,000
14,000
15,000
10,000
MWh per year
Average wind speed at hub height (m/s)
5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 8.5
E-115 / 3,000 kW E-115 / 3,200 kW
* dependent on hub height
GENERAL Nominal power 3,000 kW / 3,200 kWWind class (IEC) IEC IIAWind zone (DIBt) WZ III / WZ 4 GK I + II (3,000 kW) WZ 4 GK I + II (3,200 kW) Turbine concept gearless, variable speed, full power converterDesign service life 25 yearsCut in wind speed 2.5 m/sCut out wind speed 34 m/sExtreme wind speedat hub height (3-second gust) 59.5 m/sRotational speed 4.4 - 12.4 rpm (3,000 kW) 4.4 - 12.8 rpm (3,200 kW)Ambient temperaturefor normal operation -10 °C to +40 °CExtreme temperature range -20 °C to +50 °CGrid feed /control system ENERCON inverterGrid frequency 50 Hz / 60 HzSound power level 91.0 - 105.0 dB(A)* (3,000 kW) 91.0 - 105.5 dB(A)* (3,200 kW) Yield and noise-optimised operation. Further modes on request.
ROTORRotor diameter 115.7 mSwept area 10,515.5 m²Type upwind rotor with active pitch control
TOWERHub height IEC IA IEC IIA IEC IIIA 92 m 122 m 135 m 149 m
GENERATORType directly driven, separately excited annular generatorCooling system air/water cooling system
FEATURES STANDARD OPTIONALFACTS and transmission XENERCON SCADA XENERCON storm control XLow radar reflectivity rotor blades XIce detection system XPower curve method
Additional ice detection system X Blade heating system X Hot-Climate X Shadow shutdown X ENERCON SCADA bat protection X STATCOM X Inertia Emulation X Sector management for wind farms X Beacon management for wind farms X
ANNUAL ENERGY YIELD
TECHNICAL DATA
E-115Last updated: 05/2019. Technical information subject to change.
E-115 EP32,990 kW / 4,200 kW
www.enercon.de
6,000
8,000
9,000
7,000
10,000
12,000
13,000
14,000
15,000
16,000
17,000
18,000
19,000
11,000
20,000
MWh per year
Average wind speed at hub height (m/s)
6.7 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 8.5 8.7 8.9 9.1 9.3 9.5 9.7 9.9 10.1
E-115 EP3 / 2,990 kW
TECHNICAL DATA
E-115 EP3
The new EP3 range represents a radical cut in ENERCON’s wind energy converter design. Compact and efficient with consistently optimised processes from production, transport and logistics to installation – these are the key characteristics of this WEC generation and ENERCON’s response to new market requirements.
* dependent on hub height
GENERAL Nominal power 2,990 kW / 4,200 kWWind class (IEC) IEC SWind zone (DIBt) WZ 3 GK I + II Turbine concept gearless, variable speed, full power converterDesign service life 25 yearsCut in wind speed 2.5 m/sCut out wind speed 34 m/sExtreme wind speedat hub height (3-second gust) 59.5 m/s (IEC IIA) 70 m/s (IEC IA)Rotational speed 4.4 - 12.8 rpm (2,990 kW) 4.4 - 13.2 rpm (4,200 kW) Ambient temperaturefor normal operation -10 °C to +40 °CExtreme temperature range -20 °C to +50 °CGrid feed /control system ENERCON inverterGrid frequency 50 Hz / 60 HzSound power level 87.6 - 106.0 dB(A)* Yield and noise-optimised operation. Further modes on request.
ROTORRotor diameter 115.7 mSwept area 10,516 m²Type upwind rotor with active pitch control
TOWERHub height IEC IA IEC IIA IEC IIIA 67 m 122 m 87 m 135 m 89 m 149 m 92 m
GENERATORType directly driven, separately excited annular generatorCooling system air cooling system
FEATURES STANDARD OPTIONALFACTS and transmission XENERCON SCADA XENERCON storm control XLow radar reflectivity rotor blades XIce detection system XPower curve method
Additional ice detection system X Blade heating system X Hot-Climate X Shadow shutdown X ENERCON SCADA bat protection X STATCOM X Inertia Emulation X Sector management for wind farms X Beacon management for wind farms X
ANNUAL ENERGY YIELD
NEW WEC GENERATION
Last updated: 05/2019. Technical information subject to change.
E-126 EP33,000 kW / 3,500 kW / 4,000 kW
www.enercon.de
3,000
5,000
6,000
4,000
7,000
9,000
10,000
11,000
12,000
13,000
14,000
15,000
16,000
8,000
17,000
MWh per year
Average wind speed at hub height (m/s)
5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 8.5
E-126 EP3 / 3,000 kW E-126 EP3 / 3,500 kW E-126 EP3 / 4,000 kW
TECHNICAL DATA
E-126 EP3
The new EP3 range represents a radical cut in ENERCON’s wind energy converter design. Compact and efficient with consistently optimised processes from production, transport and logistics to installation – these are the key characteristics of this WEC generation and ENERCON’s response to new market requirements.
GENERAL Nominal power 3,000 kW / 3,500 kW / 4,000 kWWind class (IEC) IEC IIAWind zone (DIBt) WZ 4 GK I + II WZ 3 GK I + IITurbine concept gearless, variable speed, full power converterDesign service life 25 yearsCut in wind speed 2.5 m/sCut out wind speed 34 m/sExtreme wind speedat hub height (3-second gust) 59.5 m/sRotational speed 4.4 - 11.7 rpm (3,000 kW) 4.4 - 11.9 rpm (3,500 kW) 4.4 - 12.1 rpm (4,000 kW)Ambient temperaturefor normal operation -10 °C to +40 °CExtreme temperature range -20 °C to +50 °CGrid feed /control system ENERCON inverterGrid frequency 50 Hz / 60 HzSound power level 88.1 - 106.1 dB(A)1
Yield and noise-optimised operation. Further modes on request.
ROTORRotor diameter 127 mSwept area 12,668 m²Type upwind rotor with active pitch control
TOWERHub height IEC IA IEC IIA IEC IIIA 86 m 116 m 135 m
GENERATORType directly driven, separately excited annular generatorCooling system air cooling system
FEATURES STANDARD OPTIONALFACTS and transmission XENERCON SCADA XENERCON storm control XLow radar reflectivity rotor blades XIce detection system XPower curve method
Additional ice detection system X Blade heating system X Hot-Climate X Shadow shutdown X ENERCON SCADA bat protection X STATCOM X Inertia Emulation X Sector management for wind farms X Beacon management for wind farms X
ANNUAL ENERGY YIELD
ENVIRONMENTAL KEY FACTORS2
Carbon footprint 6.1 g CO2-e/kWhHarvest factor 40.6Energy payback time 7.4 month
NEW WEC GENERATION
1) dependent on hub height2) 3,500 kW nominal power / Hybrid tower HH 135 m
Last updated: 05/2019. Technical information subject to change.
E-138 EP33,500 kW / 4,200 kW
www.enercon.de
3,000
5,000
6,000
4,000
7,000
9,000
10,000
11,000
12,000
13,000
14,000
15,000
16,000
8,000
17,000
MWh per year
Average wind speed at hub height (m/s)
5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 8.5
E-138 EP3 / 3,500 kW E-138 EP3 / 4,200 kW
TECHNICAL DATA
E-138 EP3
The new EP3 range represents a radical cut in ENERCON’s wind energy converter design. Compact and efficient with consistently optimised processes from production, transport and logistics to installation – these are the key characteristics of this WEC generation and ENERCON’s response to new market requirements.
* dependent on hub height
GENERAL Nominal power 3,500 kW / 4,200 kW (E2)Wind class (IEC) IEC IIIAWind zone (DIBt) WZ 2 GK II Turbine concept gearless, variable speed, full power converterDesign service life 25 yearsCut in wind speed 2.5 m/sCut out wind speed 28 m/sExtreme wind speedat hub height (3-second gust) 52.5 m/sRotational speed 4.4 / 5 * - 10.5 rpm (3,500 kW) 4.4 / 5 * - 10.8 rpm (4,200 kW) Ambient temperaturefor normal operation -10 °C to +40 °CExtreme temperature range -20 °C to +50 °CGrid feed /control system ENERCON inverterGrid frequency 50 Hz / 60 HzSound power level 93.4 - 106.0 dB(A)* Yield and noise-optimised operation. Further modes on request.
ROTORRotor diameter 138.25 mSwept area 15,085 m²Type upwind rotor with active pitch control
TOWERHub height IEC IA IEC IIA IEC IIIA 80 m 81 m 110 m 111 m 130 m 131 m 148 m 160 m
GENERATORType directly driven, separately excited annular generatorCooling system air cooling system
FEATURES STANDARD OPTIONALFACTS and transmission XENERCON SCADA XENERCON storm control XLow radar reflectivity rotor blades XIce detection system XPower curve method
Additional ice detection system X Blade heating system X Hot-Climate X Shadow shutdown X ENERCON SCADA bat protection X STATCOM X Inertia Emulation X Sector management for wind farms X Beacon management for wind farms X
ANNUAL ENERGY YIELD
NEW WEC GENERATION
Last updated: 05/2019. Technical information subject to change.
E-136 EP54,650 kW
www.enercon.de
8,000
7,000
6,000
10,000
11,000
9,000
12,000
14,000
15,000
16,000
17,000
18,000
19,000
20,000
13,000
MWh per year
Average wind speet at hub height (m/s)
5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 8.5
E-136 EP5 / 4,650 kW
* dependent on hub height
GENERAL Nominal power 4,650 kWWind class (IEC) IEC IATurbine concept gearless, variable speed, full power converterDesign service life 20 yearsCut in wind speed 2.5 m/sCut out wind speed 25 m/sExtreme wind speedat hub height (3-second gust) 70 m/sRotational speed 6.0 - 11.0 rpm Ambient temperaturefor normal operation -10 °C / -20 °C to +30 °C / +40 °CExtreme temperature range -20 °C to +50 °CGrid feed /control system IGBT-ControlGrid frequency 50 Hz / 60 HzSound power level 93.8 - 107.2 dB(A)* Yield and noise-optimised operation. Further modes on request.
ROTORRotor diameter 136 mType upwind rotor with active pitch control
TOWERHub height IEC IA IEC IIA IEC IIIA 109 m 120 m 132 m
GENERATORType multi-pole synchronous generator (PMG)Cooling system air cooling system
FEATURES STANDARD OPTIONALFACTS and transmission XENERCON SCADA XLow radar reflectivity rotor blades XShadow shutdown XIce detection system X Sector management for wind farms X Beacon management for wind farms X
ANNUAL ENERGY YIELD
TECHNICAL DATA
E-136 EP5Last updated: 05/2019. Technical information subject to change.
E-147 EP5 E25,000 kW
www.enercon.de
10,000
9,000
8,000
12,000
13,000
11,000
14,000
16,000
17,000
18,000
19,000
20,000
21,000
22,000
15,000
MWh per year
Average wind speed at hub height (m/s)
5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 8.5
E-147 EP5 / 5,000 kW
* dependent on hub height
GENERAL Nominal power 5,000 kWWind class (IEC) IEC IIATurbine concept gearless, variable speed, full power converterDesign service life 20 yearsCut in wind speed 2.5 m/sCut out wind speed 25 m/sExtreme wind speedat hub height (3-second gust) 59.5 m/sRotational speed 4.0 - 11.0 rpm Ambient temperaturefor normal operation -10 °C / -20 °C to +30 °C / +40 °CExtreme temperature range -20 °C to +50 °CGrid feed /control system IGBT-ControlGrid frequency 50 Hz / 60 HzSound power level 95.5 - 106.4 dB(A)* Yield and noise-optimised operation. Further modes on request.
ROTORRotor diameter 147 mType upwind rotor with active pitch control
TOWERHub height IEC IA IEC IIA IEC IIIA 126 m 132 m 143 m 155 m
GENERATORType multi-pole synchronous generator (PMG)Cooling system air cooling system
FEATURES STANDARD OPTIONALFACTS and transmission XENERCON SCADA XENERCON storm control XLow radar reflectivity rotor blades XShadow shutdown XIce detection system X Blade heating system X Sector management for wind farms X Beacon management for wind farms X
ANNUAL ENERGY YIELD
TECHNICAL DATA
E-147 EP5 E2Last updated: 05/2019. Technical information subject to change.
E-160 EP54,600 kW
www.enercon.de
11,000
10,000
9,000
13,000
14,000
12,000
15,000
17,000
18,000
19,000
20,000
21,000
22,000
23,000
16,000
MWh per year
Average wind speed at hub height (m/s)
5.1 5.3 5.5 5.7 5.9 6.1 6.3 6.5 6.7 6.9 7.1 7.3 7.5 7.7 7.9 8.1 8.3 8.5
E-160 EP5 / 4,600 kW
* dependent on hub height
GENERAL Nominal power 4,600 kWWind class (IEC) IEC IIIATurbine concept gearless, variable speed, full power converterDesign service life 20 yearsCut in wind speed 2.5 m/sCut out wind speed 22 m/sExtreme wind speedat hub height (3-second gust) 52.5 m/sAmbient temperaturefor normal operation -10 °C / -20 °C to +30 °C / +40 °CExtreme temperature range -20 °C to +50 °CGrid feed /control system IGBT-ControlGrid frequency 50 Hz / 60 HzSound power level 107.0 dB(A)* Yield and noise-optimised operation. Further modes on request.
ROTORRotor diameter 160 mType upwind rotor with active pitch control
TOWERHub height IEC IA IEC IIA IEC IIIA 120 m 166 m
GENERATORType multi-pole synchronous generator (PMG)Cooling system air cooling system
FEATURES STANDARD OPTIONALFACTS and transmission XENERCON SCADA XENERCON storm control XLow radar reflectivity rotor blades XShadow shutdown XIce detection system X Blade heating system X Sector management for wind farms X Beacon management for wind farms X
ANNUAL ENERGY YIELD
TECHNICAL DATA
E-160 EP5Last updated: 05/2019. Technical information subject to change.