umill series - english - 2016 09mill series structure − structure with fixed portal in ribbed cast...
TRANSCRIPT
Performance
Technology
Power
Accuracy
Vertical milling centre with portal,
versatile, high performances
mill
Series
mill
Series
Structure − Structure with fixed portal in ribbed cast iron
with stiffness walls attenuate the torsional stresses
− Cast iron with a high mechanical performance which maximizes structure rigidity and allows optimum harmonic stability and maximum damping during demanding cutting conditions
− Machine secured on foundation with weight equally distributed over fixing points enabling extreme rigidity and a very high geometrical stability
− Modular design allows maximum flexibility in machine configurations to adapt to the technical requirements of the customer
Linear axes − Preloaded ballscrews − Preloaded bearings to remove inversion
backlash and axial stress on ballscrews enabling a high quality of surfacing
− Roller guideways on the X, Y and Z permitting high travel speeds, and excellent stability of the movement
− Automatic grease lubrication of ballscrews and bearings minimising the pollution of coolant and the consumption
Table − Swivelling rotary table fixed on cradle and moving
along the X axis for higher rigidity − Excellent approach to the workpiece on its 5
faces thanks to the swivelling of the table − Travels are optimized to offer an important
distance under the spindle nose − Direct measurement on each rotating axes with
absolute encoder
Spindel − Powerful spindle with high torque allowing high
metal removal rates − Direct coupling of the motor on spindle for a
better transmission of the forces − Spindle body designed to facilitate accessibility to
the workpiece during the 5-axis machining
Environment - Ergonomics − Evacuation channels for chips equipped with
washing device − Complete safeguard ensuring safety of the
machine, the operator and environment − Accessibility to the machining area from top and
side of the machine and possibility to load with crane
− Opening of the panels is simplified for an easy maintenance
− Operator panel
The Umill range is a 5-axis machining centres with a portal structure and a swivelling rotary table on cradle.
Its modern design and compact size are optimized to guarantee a minimal footprint without compromising the fundamental characteristics of the HURON machines : enhanced rigidity for high performance and quality machining.
This range is ideally suited for complex parts in 3 or 5 axes, from roughing to finishing, for various sectors such as high precision mechanical parts, automotive, rail, energy, machining of 3D forms, or aerospace.
Spindle Umill 6
Taper ISO 40
Spindle speed 10.000 rpm Power (S1/S6) 12 / 26,2 kW Torque (S1/S6) 115 / 250 Nm Characteristic speed 1.000 rpm − Direct drive for higher positioning accuracy and less
maintenance. − Guiding by ceramic roller bearings to reinforce rigidity and
increase spindle life ; less vibrations and decrease of functioning temperature.
− Lubrication of bearings with grease which do not require any maintenance.
Tools changer Umill 6
Type Drum + Double arm Qty housings 30 Taper ISO 40 Tool dimension
Max. Ø adjacent / non adjacent tool 80 / 150 mm Max. length 300 mm Max. weight of tool / in magazine 7 kg / 150 kg
Tool changing time tool/tool - chip/chip 8 sec - 15 sec
The automatic load/unload of the tool is made vertically
Table Umill 6
Dimension Ø 630 mm Admissible load 600 kg Qty T slots 7 Distance between slots 80 mm Width of reference slot 18 H 7 mm Width of other slots 18 H 12 mm
Height table plane / floor 850 mm Min./max. distance spindle nose / table plane (table in vertical position) 200 mm / 750 mm
Distance portal / table 725 mm
Central bore Ø 50 H7
Umill6 Interference diagrams
X-Z plane view Y-Z plane view
Table position = 0°
Y-Z plane view
Table position = 90°
www.huron.eu
FRANCE Huron Graffenstaden SAS 156 route de Lyon BP 30030 67401 Illkirch Graffenstaden Cedex � +33 (0)3 88 67 52 52 � +33 (0)3 88 67 69 00 � [email protected]
GERMANY Huron Fräsmaschinen GmbH Siemensstrasse 56 70839 Gerlingen � +49 (0)7156 92836 12 � +49 0)7156 92836 50 � [email protected]
CANADA Huron Canada 85 rue St-Charles Ouest #105 Longueuil, Québec, J4H 1C5 � +1 514 448 4873 � +1 514 448 4875 � [email protected]
TURKEY Huron Turkey Gayrettepe mah. Ayazma Dere Caddesi Pazar sok. Bareli Is merkezi No.2-4 Kat 2 34387 Gayrettepe / Istanbul � +90 (212) 671 20 92 � +90 (212) 252 51 75 � [email protected]
All
desc
riptio
ns, d
ata
and
phot
os a
re s
uppl
ied
for
info
rmat
ion
only
. Hur
on G
raffe
nsta
den
rese
rves
the
right
to m
ake
chan
ges
to th
e m
odel
s de
scrib
ed fo
r te
chni
cal o
r co
mm
erci
al r
easo
ns a
t any
tim
e.
The
sta
ndar
d de
scrip
tion,
acc
esso
ries
and
tech
nica
l dat
as c
onfo
rms
to o
ur p
ricel
ist,
and
not t
o th
e ph
oto
of m
achi
nes
show
n in
the
cata
logu
e.
2016
-09
- U
mill
Ser
ies
/ Eng
lish
/ HU
RO
N
Linear axes X / Y / Z Umill6Travels mm 700 x 740 x 550Rapid feedrates m/min 40 m/min
Acceleration per axis m/s²X - Z = 6 m/s²
Y = 4 m/s²Table - A / C axes Swivelling rotary tableA axis : Swivelling - Swivelling speed -20° / +110° - 20 rpmC axis : Rotary - Rotary speed 360° - 35 rpmDimension mm Ø 630Admissible load kg 600Max. distance spindle nose / table plane mm 750SpindleSpindle speed rpm 10.000Taper ISO 40Power - Torque (S1/S6) kW/Nm 12 - 26,2 / 115 - 250Characteristics speed rpm 1.000
Positioning uncertainty : P X - Y - Z = 15 µRepeatability : Ps medium X - Y - Z = 5 µTools changerQty housings 30Taper ISO 40Tool dimension : Length - Ø - Weight mm - mm - kg 300 - 80 - 7CoolantFlow - Pressure l/min - bar 30 - 3Tank Litres 380DimensionsWeight of the machine kg 13.000Dimensions : Width x Depth mm 5.350 x 3.700Dimensions : Height mm 3.600
Technical characteristics
Accuracy on linear axes (VDI DGQ 3441)
Standard machine
− In conformity with the Machine Directive 2006/42 CE − Vertical spindle − Tools changer 30 housings − Low pressure coolant 3 bar through nozzles − Air blowing through nozzles − Coolant tank − Washing of chips evacuation channels − Chips conveyor − Washing gun − Complete safeguard − Ethernet network − Machining with inclined plane
Equipements as options
− Taper HSK 63-A − Spindles variants − Tools changers 40, 60 housings − Palletising systems − Medium pressure coolant 20 bar − Conveyor with spirals − Workpiece probe − Tool probe