tj12 hydraulic track jack (10 ton) - stanley infrastructure 2018-12-26آ  a jack that is low on...

Download TJ12 HYDRAULIC TRACK JACK (10 TON) - Stanley Infrastructure 2018-12-26آ  A jack that is low on hydraulic

Post on 23-Mar-2020

0 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • USER’S MANUAL Safety, Operation and Maintenance

    TJ12 HYDRAULIC

    TRACK JACK (10 TON)

    © 2017 Stanley Black & Decker, Inc. New Britain, CT 06053

    U.S.A. 72713 4/2018 Ver. 7

    European Union Rue de la Loi/Wetstraat 175 B-1048 Bruxelles/Brussel Belgique/België

  • 2 ► TJ12 User Manual

    DECLARATION OF CONFORMITY

    DECLARATION OF CONFORMITY ÜBEREINSTIMMUNGS-ERKLARUNG DECLARATION DE CONFORMITE CEE DECLARACION DE CONFORMIDAD DICHIARAZIONE DI CONFORMITA

    Hydraulic Tools

    ______________________________________________________________________ I, the undersigned: Ich, der Unterzeichnende: Je soussigné: El abajo firmante: lo sottoscritto:

    Nuerenberg, David

    Surname and First names/Familiennname und Vornamen/Nom et prénom/Nombre y apellido/Cognome e nome

    hereby declare that the equipment specified hereunder: bestätige hiermit, daß erklaren Produkt genannten Werk oder Gerät: déclare que l’équipement visé ci-dessous: Por la presente declaro que el equipo se especifica a continuación: Dichiaro che le apparecchiature specificate di seguito:

    1. Category: Track Jack Kategorie: Catégorie: Categoria: Categoria:

    2. Make/Marke/Marque/Marca/Marca Stanley

    3. Type/Typ/Type/Tipo/Tipo: TJ12 4. Serial number of equipment: Seriennummer des Geräts: Numéro de série de l’équipement: Numero de serie del equipo: Matricola dell´attrezzatura:

    All

    Has been manufactured in conformity with Wurde hergestellt in Übereinstimmung mit Est fabriqué conformément Ha sido fabricado de acuerdo con E’ stata costruita in conformitá con

    Directive/Standards Richtlinie/Standards Directives/Normes Directriz/Los Normas Direttiva/Norme

    No. Nr Numéro No n.

    Approved body Prüfung durch Organisme agréé Aprobado Collaudato

    Machinery Directive EN ISO EN

    2006/42/EC:2006 12100:2010 1494:2000+A1:2008

    Self Self Self (Test Report Ref # 12142016TJ12) 2/14/2017 Ver-1)

    5. Special Provisions: None Spezielle Bestimmungen: Dispositions particulières: Provisiones especiales: Disposizioni speciali: 6. Representative in the Union: Patrick Vervier, Stanley Dubuis 17-19, rue Jules Berthonneau-BP 3406 41034 Blois Cedex, France. Vertreter in der Union/Représentant dans l’union/Representante en la Union/Rappresentante presso l’Unione Done at/Ort/Fait à/Dado en/Fatto a Stanley Hydraulic Tools, Milwaukie, Oregon USA Date/Datum/le/Fecha/Data Signature/Unterschrift/Signature/Firma/Firma Position/Position/Fonction/Cargo/Posizione North American Quality Manager

  • TJ12 User Manual ◄ 3

    TABLE OF CONTENTS

    SERVICING: This manual contains safety, operation and routine maintenance instructions. STANLEY Infrastructure recommends that servicing of hydraulic tools, other than routine maintenance, must be performed by an authorized and certified dealer. Please read the following warning.

    To fill out a product warranty validation form, and for information on your warranty, visit www.stanleyinfrastructure.com and select the Company tab > Warranty.

    Note: The warranty validation record must be submitted to validate the warranty.

    SERIOUS INJURY OR DEATH COULD RESULT FROM THE IMPROPER REPAIR OR SERVICE OF THIS TOOL.

    REPAIRS AND / OR SERVICE TO THIS TOOL MUST ONLY BE DONE BY AN AUTHORIZED AND CERTIFIED DEALER.

    For the nearest certified dealer, call STANLEY Infrastructure at (503) 659-5660 and ask for a Customer Service Representative.

    SAFETY SYMBOLS .................................................................................................................................................4 TOOL STICKERS AND TAGS .................................................................................................................................7 MAINTENANCE & CARE ........................................................................................................................................8 OPERATING INSTRUCTIONS ............................................................................................................................. 11 TROUBLESHOOTING ..........................................................................................................................................13 SPECIFICATIONS ................................................................................................................................................14 PUMP ASSEMBLY ILLUSTRATION & PARTS LIST ...........................................................................................15 BASE ILLUSTRATION & PARTS LIST .................................................................................................................16 SERVICE ................................................................................................................................................................17

  • 4 ► TJ12 User Manual

    Always observe safety symbols. They are included for your safety and for the protection of the tool.

    LOCAL SAFETY REGULATIONS Enter any local safety regulations here. Keep these instructions in an area accessible to the operator and maintenance personnel.

    Safety symbols and signal words, as shown below, are used to emphasize all operator, maintenance and repair actions which, if not strictly followed, could result in a life-threatening situation, bodily injury or damage to equipment.

    This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

    This safety alert and signal word indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

    This safety alert and signal word indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

    This safety alert and signal word indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

    This signal word indicates a potentially hazardous situation which, if not avoided, may result in property damage.

    This signal word indicates a situation which, if not avoided, will result in damage to the equipment.

    This signal word indicates a situation which, if not avoided, may result in damage to the equipment.

    SAFETY SYMBOLS

  • TJ12 User Manual ◄ 5

    SAFETY PRECAUTIONS

    Tool operators and maintenance personnel must always comply with and work in accordance with the safety precautions and instructions given in this manual and on the stickers and tags attached to the tool and hose.

    These precautions are given for your safety. Review them carefully before operating the tool and performing general maintenance or repairs.

    Supervising personnel should develop additional precautions relating to the specific work area and local safety regulations. Place the added precautions in the space provided.

    • The TJ12 conforms with EN 1494:2000+A1:2008. This jack is intended for only the lifting of rail (railroad tracks) and should never be used for any other purpose other than what it was intended for or personal injury could result.

    • The user must be familiar with correct operation, maintenance and use of the jack. Lack of knowledge can lead to personal injury.

    • Operator must start in a work area without bystanders. The operator must be familiar with all prohibited work areas such as excessive slopes, dangerous terrain conditions and extreme climates.

    • Always wear safety equipment such as goggles, gloves, head protection and safety shoes at all times when operating the tool.

    • Warning: Hydraulic fluid under pressure could cause skin injection injury. If you are injured by hydraulic fluid, get medical attention immediately.

    • The total load lifted or supported by the jack must never exceed the rated capacity. Excess pressure can result in personal injury. Use a jack with sufficient capacity to lift a load. Keep clear of lifted loads.

    • Before each use, visually inspect the jack to prevent unsafe conditions from developing. Do not use jacks that are damaged, leaking, altered or in poor condition. See “INSPECTING THE TRACK JACK FOR DAMAGE OR LEAKAGE” on page

    10

    • Properly support the jack.

    • Do not put poorly balanced or off-center loads on the jack pad or jack. The load can tip and cause personal injury. Do not use in unstable or hazardous positions.

    • The jack must be used on flat surfaces to be able to carry the load correctly. The base must be completely supported. Do not push or lift on the ends of the base.

    • Do not lift people or loads with people on them.

    • As the load is lifted, use blocks or cribs to guard against a falling load.

    • To prevent personal injury, do not allow personnel to go under, or work under or on a load before it is properly secured by suitable means. All personnel must be clear of a load before lowering or lifting.

    • Lift only dead weight loads. Do not add additional weight to a lifted load.

    • Do not use jacks that are damaged, altered or in poor conditio

Recommended

View more >