this is how it works - marken...

E22

www.youtube.com/user/BreitfeldSchliekert

3

4

2

5

1

4 5 6

This is how it works

Option 1: Without thinner – for smooth surfaces (e.g. plier tips)

approx. 5–10 minutes

without drying period

Scratch Protection ina Twinkling of an Eye!

Plasti DipRubber Coating

Plasti Dip

No. 3169 20, 21, 22

Thinner

No. 3169 10

Container, syringe, stirring spoon

Tips & Tricks

Option 2: With thinner – for uneven surfaces (e.g. tip of the nose pad arm adjusting plier) | Repeat step 1–3

Cleaning Stirring

Drying

Decant undiluted

Dipping

Fill the syringe Mixing and dipping Drying

TIP: To avoid bubbles don't shake the Plasti Dip, stir carefully. Undiluted Plasti Dip can be refi lled into the Plasti Dip can.

Diluted Plasti Dip can be stored in a lidded can.

E23

Starter Set

Contains 3 colours (black, blue and red) and one bottle of thinner.

Plasti Dip

Plasti Dip Thinner

3169 . . 429 ml

3169 10 250 ml

3169 51

Plasti Dip – Professional Protection whilst Adjusting Frames

Protects, gives grip and stays fl exible

Plasti Dip – Multi-Purpose SyntheticRubber Coating

• Can be used on metal, glass, stone and wood

• Air drying synthetic rubber coating

• Easy to apply by dipping or brushing

• Food safe in cured condition

• 24 hours curing time

3169 20

3169 21

3169 22

Black

Blue

Red

E24

Repair Colours

Coloured quality lacquer for small repairs on frames, for example

re-colouring after soldering. The colours may be mixed. The clear

lacquer can be used for small repairs of protection lacquer and

to optimise the colours.

Repair Colour Set

Consisting of all 9 colours plus clear lacquer.

• Available in 9 colours plus clear lacquer:

2611 50

2611 . .

Order No.

2611 00

2611 01

2611 02

2611 03

2611 04

Colour

White

Black

Metallic silver

Metallic gold

Blue

Code Order No.

2611 05

2611 06

2611 07

2611 08

2611 09

Colour

Red

Yellow

Green

Brown

Clear Lacquer

Code

12 ml

• Thoroughly clean frame parts to be repaired

• Shake the bottle well, you must be able to hear the ball bearing

• Apply the colour to the desired area

• Allow 6 hours to dry

• If necessary apply an additional coat of clear lacquer

E25

Repair Pens

With repair pens you can successfully:

• Repair scratches

• Cover solder or welding traces

• Can also be used to cover corrosion caused by perspiration

Usable for metal and plastic frames.

Repair Pen Set

Consisting of 12 pens plus 1 corrector pen.

2612 . .

2612 50

• Available in 12 colours plus 1 corrector pen:

Order No.

2612 00

2612 01

2612 02

2612 03

2612 04

2612 05

2612 06

Colour

Gloss black

Matt black

Dark blue

Light blue

Rose gold

Yellow gold

Gunmetal

Code Order No.

2612 07

2612 08

2612 09

2612 10

2612 11

2612 12

Colour

Light silver

Light brown

Dark brown

Protective lacquer clear gloss

Protective lacquer clear matt

Corrector Pen

Code

• Thoroughly clean the frame part to be repaired

• Shake the pen and press the tip in several times until you see the colour come through

• Put the colour on the required area

• Leave to dry for 10 to 20 minutes. Use a frame heater to dry quicker

• A second coat of clear lacquer may be required

• Not appropriate for paint coats that have received heat treatment

E26

Lens Deco Pens

To colour lens edges and nylon threads.

For all materials including polycarbonate.

• One pen will colour over 300 lenses

• Air dry for only 20 minutes

• The colour can be removed with the corrector pen at any time,

no time limit

• Simply wipe off the colour with acetone or spirit with the exception

of polycarbonate lenses

• Available in 15 colours plus 1 corrector pen:

All included in No. 2610 51

Lens Deco Pen Set

• Consisting of 12 pens plus 1 corrector pen

• We reserve the right to change the assortment

2610 51

2610 . .

Order No.

2610 01

2610 02

2610 03

2610 04

2610 05

2610 06

2610 07

2610 08

Colour

Black

Violet

Ochre

Cognac

Fuchsia

Grey

Plum

Dark green

Code

4

5310

5315

5326

5328

5330

5331

5332

Code Order No.

2610 09

2610 10

2610 11

2610 12

2610 13

2610 14

2610 15

2610 00

Colour

Light turquoise

Rose

Bronze

Blue

Brown

Bordeaux

Light blue

Corrector Pen

Code

5341

5617

5634

5636

5340

5333

5339

Code

Clean the lens edge thoroughly with lens cleaner No. 3175 00 or with an ultrasonic cleaning unit before application.

For best results do not polish the lens edge. Shake the pen and gently push in the cartridge to fi ll with colour.

For easy application attach the lens to a lens groover. Use lens cleaner No. 3175 00 to clean lens after application.

Please screw cap on tightly after each use to prevent the pen from drying out.

E27

www.youtube.com/user/BreitfeldSchliekertTips & Tricks

Buffi ng Wheel?+ Polishing

Wax?= The Combinationis Important!

Perfectly Polished

This is how it works

BAKELITE, HORN, CAOUTCHOUC, METAL

ACETATE, OPTYL, CELLULOID, PROPIONATE

ROUGH POLISHING

Grinding wax

No. 3120 00

FINE POLISHING

Polishing wax

No. 3122 00, 3118 00

HIGH GLOSS POLISHING

Burnishing wax

No. 3125 00,

No. 3118 00

POLYCARBONATE

LENS POLISHING

Polishing past

No. 3127 00

CR 39, TRIVEX, PNX

ROUGH POLISHING

Polishing paste

No. 3128 00, 3129 01

FINE POLISHING

Polishing paste

No. 3128 00, 3129 01

STEEL, WHITE AND PRECIOUS METALS

ROUGH POLISHING

Polishing wax

No. 3144 00

FINE POLISHING

Polishing wax

No. 3143 00

without any wax

Buffi ng wheel

No. 3416 10, 3474 00

Buffi ng wheel

No. 3416 10, 3474 00

Buffi ng wheel, wool cone

No. 3470 01, 3471 00, 3472 00,

No. 3561 00, 3582 00, 3571 00

Felt cloth buff

No. 3457 00

Leather buffi ng wheel

No. 3462 00

Buffi ng wheels

No. 3471 00, 3470 01, 3472 00,

No. 3474 00, 3416 10

Buffi ng wheels

No. 3471 00, 3470 01, 3472 00,

No. 3474 00, 3416 10

Felt cloth buff

No. 3474 00, 3457 00

Felt discs

No. 3455 10, 3450 00, 3456 00

E28

Felt Disc, conical shaped Soft Set Felt

• Core: Centered

• Bore Ø: 8 mm

Felt Buffi ng Wheel

• Core: Plastic

• Bore Ø: Conical

Felt Discwith Groove

• Core: Centered

• Bore Ø: 8 mm

Felt Disc

• Core: Centered

• Bore Ø: 8 mm

Felt Cloth Bufffor Polycarbonate

To extend service life the red rings

can be separated individually.

The felt cloth buff in combination

with the polishing wax

No. 3127 00, is perfectly suited

for polishing Polycarbonate

lenses – optimum speed for the

treatment of Polycarbonate:

approx. 1,500 rpm.

• Core: Plastic


Leather Buffi ng Wheel

No. 3462 00 is especially suitable

for the fi nal polishing of metal

rubber, paladon, bakelite, horn etc.

Use the wheel dry without any

polishing compound.

• Core: Plastic


Muslin Buffi ng Wheel

• Core: Leather

• Bore Ø: 6 mm

Muslin Buffi ng Wheel

• Core: Leather

• Bore Ø: 6 mm

3418 00

100 mm 15 mm

3450 00

100 mm 20:5 mm

3455 10

100 mm 25 mm

3456 00

100 mm 25 mm

3457 00

80 mm 25 mm

3462 00

90 mm 6 mm

3470 01

125 mm 12 mm

3471 00

125 mm 24 mm

E29

Buffi ng Wheel

• Core: Plastic

• Bore Ø: 8 mm

Flannel Buffi ng Wheel

• Core: Leather

• Bore Ø: 6 mm

Wool Brush

• Core: Wood

• Bore Ø: 6 mm

Yarn Brush

• Core: Plastic


Buffi ng Wool Cone

The buffi ng wool cone is manu-

factured in such a way that it can

be mounted on a conical polishing

tip. A different kind of fi xing is not

available. Due to the length of the

axis unbalanced run may occur.

• Core: Wood


Wool Brush

• Core: Plastic


3474 00

125 mm 30 mm

3416 10

100 mm 10 mm

3561 00

70 mm 35 mm

3582 00

80 mm 25 mm

3575 00

90 mm 20 mm

3571 00

30:15 mm 70 mm

Silicone Impregnated Muslin Wheel

This silicone impregnated fabric

structure offers signifi cant advan-

tages: it increases the life of the

buffi ng wheel, due to elimination

of fl uff. They require less pressure

during the polishing process and

save 50 % on polishing paste.

• Core: Plastic

• Bore Ø: 6 mm

3472 00

100 mm 12 mm

To prevent polishing buffs from fraying these can be napped

before fi rst use using a sharp object. However due to the

properties of the material cotton cloth is not completely

free of fl uff.

For all buffi ng wheels with plastic core

Plastic cores have conical borings. While attaching

to the po lish ing tip, the cone of the tip and the boring

have to match.

Corresponding to the “European Safety Regulations

for the correct use of grinding wheels” the following

has to be observed:

1. Wheels with a total diameter of 100 mm or more

have to be fl anged ⅔ on both sides.

2. The maximum running speed has to be observed.

3. During operation safety goggles (see accessories catalogue)

have to be worn.

“Perfectly Polished”

(see page E 27)

To ensure the buffi ng wool cone No. 3571 00 runs safely it’s

necessary to check if the cone can be screwed onto the polishing

tip for at least 2 cm.

E30

3145 00

Polishing Paste

• Finest polishing compounds

• High amount of grease: smears

more easily and cools off faster

3128 00 3129 01

Poligreen

Buffi ng and smooth polishing:

Cloth buffi ng wheels

White metals

approx. 60 g

3144 00



Plastic and caoutchouc rubber

approx. 60 g

Applications with approx. 2,800 rpm:

Field of application:

Weight:

Poliblue

Chamois Polishing Paste

• Finest polishing compounds

• Grease free: has no cooling

effect during polishing

High gloss polishing:


CR 39, precious metals

approx. 50 g

High gloss polishing:

Cloth buffi ng wheels, wool wheels

CR 39, precious metals

approx. 100 g



Weight:

Polired

3143 00



Gold, steel

approx. 60 g



Weight:

For No. 3128 00 and 3129 01

Finest polishing compounds contain an especially fi ne and treated polishing powder. The speed of the polishing machine should be very slow

and you should use felt discs.

Please take note of our small tools assortment including the silicone polisher No. 2240 57 on page C 33.

E31

3118 00

Grinding Wax, grey

Rough polishing: Cloth buffi ng wheels

(approx. 2,300 rpm)

Plastic

approx. 200 g

3120 00


Wool wheels, cloth buffi ng wheels

Plastic, optyl

approx. 700 g



Weight:

Polishing Wax, blue

3125 00

Burnishing Wax, beige

Smooth polishing: Wool wheels,

cloth buffi ng wheels

Plastic

approx. 200 g

3122 00

High glossing polishing: Wool wheels

Plastic

approx. 200 g



Weight:

Burnishing Wax, beige

Polishing Wax, blue, for Polycarbonate

The polishing paste is a high gloss polishing paste with “Dia mantine” being perfectly suited for polishing

Poly carbonate lenses as well as for the materials Titanium, Platinum and Palladium. The best polishing

results will be achieved with the felt cloth No. 3457 00 which has a patented conical fl ange (refer to page

E 28).

3127 00

High gloss polishing: Felt cloth buffi ng wheel,

wool wheels

Polycarbonate, Titanium, Palladium, Platinum

approx. 100 g



Weight:

You will fi nd our polishing motors

on page A 28 and A 29.

“Perfectly Polished”

(see page E 27)

E32

Abrasive Paper

Abrasive Rubber

To clean solder points, to dull metals and plastic.

3251 18

3251 24

3251 32

3251 40

3251 60

3251 80

Granulation: 180

Granulation: 240

Granulation: 320

Granulation: 400

Granulation: 600

Granulation: 800

3412 01

3412 02

3412 03

Granulation: Rough

Granulation: Medium

Granulation: Fine

3251 . .

3412 . .

Abrasive Bar, fl at

• Working area: 230 x 18 x 4 mm

3253 10

3253 22

3253 40

Granulation: 100

Granulation: 220

Granulation: 400

3253 . .

Abrasive Bar, triangular

• Working area: 230 x 11 mm

• Working angle: 60°

3254 10

3254 22

3254 40

Granulation: 100

Granulation: 220

Granulation: 400

3254 . .

Abrasive Bar, half-round

• Working area: 230 x 17 x 12 mm

3255 10

3255 22

3255 40

Granulation: 100

Granulation: 220

Granulation: 400

3255 . .

Assortment of Abrasive Bars

• Shapes: fl at, triangular, half round

• Granulation: 100, 220 and 400

3253 99

2 pieces 2 pieces

2 pieces

5 sheets

18 pieces (2 per granulation and shape)

230 x 280 mm

80 x 20 x 50 mm

E33

Diamond Tool Cleaner

Pencil shaped; a bundle of 1,500 fi nest steel wires guarantees

the cleaning of drill bits, millers and diamond drill bits. The grade

is adjustable.

Brass Cleaning Brush

• Core: Metal


Filing Brush

• Flat

• Coated surface: 105 mm

Marking Needle

• With hard metal tip

• Ball pen type

• Retracts for safety

• Black plastic grip to optimise the handling

• Spare tips available

Tips for Marking Needle

• Hard metal spare tips

Grinding Sponge Disc

• Granulation: 46

• Max. speed: 4,780 rpm

• Bore Ø: 8 mm

3506 00

50 mm 10 mm

3501 00 120 mm

3516 00

3426 10

100 mm 20 mm

2302 00 117 mm

2302 10 2 pieces

Graining Brush

• Core: Plastic


• Wire diameter: 0.6 mm

• Working speed: max. 2,800 rpm

To create a wood grain effect on acetate material.

3510 00 100 mm

25 g

260 g

250 x 35 mm

E34

Silver Palladium Wire

Only for use with spectacle frames with nickel

content, such as monel or German silver.

Material strength: 0.4 mm

Steel Wire

Only for use with stainless steel frames.


Solder Dispenser

“Original Degussa”, for Degussa solder No. 3007 00.

Opening: 1.8 mm

3043 30 3043 10

2059 00

3043 20

20 g200 mm

1 x 50 cm

Titanium Wire

Only for use with titanium frames.


1 x 50 cm 1 x 50 cm

Welding Wires for Laser or TIG Welding

Accessories for Soldering and Welding Units

Gas Cartridge

• For use with hand held solder unit

No. 2727 30 (discontinued)

• Butane gas

Oxygen Bottle

• For Micro Torch Set No. 2762 05 and

2762 00 (discontinued)

• Oxygen gas (no liquid gas)

Gas Cartridge

• For handheld soldering unit No. 2763 00

and Micro Torch Set No. 2762 05 and

2762 00 (discontinued)

• Liquid gas

• Burning duration: approx. 3.5 h

at low fl ame

2761 06 2737 01 2760 0270 ml 400 ml 13 g

This is not liquid gas.

The cartridge lasts for approx. 45 minutes.

Due to legal requirements gas and oxygen will be delivered

in separate packaging.

E35

3002 00white fl uid, fl ux included

Silver Solder, white fl uid

• For jewellery and frames

• To use without additional fl ux

• Metal contents: 56 % Ag

• Melting point: 650 °C

• Form: Paste in a dispensing cartridge

Braze Tec h 80 Flux

• For diffi cult to process materials, such as

stainless steel

• Leaves no residue on the soldered area

• Consistency: Paste

3114 00

Fluoron

• For high temperature soldering

• Consistency: Liquid

Braze Tec h Flux


3112 00

3112 05

3101 00

Heatstop

• Isolating paste for all types of soldering

• Prevents the distribution of heat in metal


3029 00

Electrolyte Flux

3198 00 800 ml 3199 01 1 l

100 g 100 ml

100 g

8 g

100 g

500 g

You will fi nd our soldering unit No. 2839 60

and further accessories on page A 36 to A 39.

If dried out, welding fl ux and heat stop can be sprayed

with distilled water.

E36

Hard Solder silver

Silver Solder Degussa 6002without Cd

Solder wire, white fl uid

Phantom Solder

Silver Solder Degussa 600 L 3

Bronze, nickel, stainless steel

60 % Ag without Cd

680 °C

3112 . . Braze Tec h

0.5 mm wire Ø

5 g

approx. 230 cm

3003 00 3007 00

Jewellery

60 % Ag without Cd

680 °C


0.4 mm wire Ø in dispenser

2 g

approx. 110 cm

3010 003008 00


Metal contents:

Melting point:

Recommended Flux:

Form:

Sales unit:

Length:

For practice, also suitable

for nickel-free material

55 % Ag, Sn

660 °C


0.5 mm wire Ø in dispenser

3 g

approx. 130 cm

All silver alloy over

800 ‰ fi neness

675 ‰ Au

710 °C


0.4 mm wire Ø

3.5 g

approx. 230 cm

3014 00


Metal contents:

Melting point:

Recommended Flux:

Form:

Sales unit:

Length:

Jewellery

60 % Ag, 23 % Cu, 14.5 % Zn, 2.5 % Sn

680 °C


0.5 mm wire Ø

5.3 g

approx. 280 cm


Metal contents:

Melting point:

Recommended Flux:

Form:

Sales unit:

Length:

Solder

E37

white fl uid, fl ux includedyellow fl uid, fl ux included

Gold Solder,8 Ct

Universal Solder,yellow fl uid

Universal Solder,white fl uid

gold fl uid, fl ux includedwhite fl uid, fl ux included

Pallarium – Universal Solder,white fl uid

Pallarium – Universal Solder,gold fl uid

Solder Wire,yellow fl uid

3016 00


Metal contents:

Melting point:

Recommended Flux:

Form:

Sales unit:

Length:

3020 03


Metal contents:

Melting point:

Recommended Flux:

Form:

Sales unit:

3022 03

All standard metals such as silver, nickel, chrome,

stainless steel, brass, etc.

40 % Ag

700 °C

Without fl ux

Tube 1 mm Ø

3 tubes at 150 mm each

3023 00 3023 01


Metal contents:

Melting point:

Recommended Flux:

Form:

Sales unit:

All standard metals such as nickel, silver, chrome,

stainless steel, gold, brass and others.

33 % Ag

580 °C

Without fl ux

Tube 1 mm Ø

12 rods at 150 mm each

Jewellery and metal frames

of gold alloy

333 ‰ Au

590 °C

3101 00 Fluoron

Wire 0.5 mm Ø

1 g

approx. 70 cm



50 % Ag

670 °C

Without fl ux

Tube 1 mm Ø

3 tubes at 150 mm each

All standard metals such as nickel, silver, chrome,

stainless steel, gold, brass and others

45 % Ag

580 °C

Without fl ux

Tube 1 mm Ø

12 rods at 150 mm each

3015 00



55 % Ag, 21 % Cu, 22 % Zn, 2 % Sn

660 °C

3101 00 Fluoron

Wire 0.4 mm Ø

5 g

approx. 75 cm

this is how it works - marken...

Documents