this a cable kit not a cable assembly *** - the (new) people's …€¦ · ·...

REVISION

Date Rev Remarks

04/12/09 A Draft

CABLE DRAWING:

DRAWING NO.:

MWACAB-0007

DRAWN BY:

DRC

POSEIDON SCIENTIFIC INSTRUMENTS PTY LTD

DATE: 15-Dec-09

SHEET: 1 of 4

17 QUEEN VICTORIA ST, FREMANTLE WA 6160. PHONE (08) 9430 6639 FAX (08) 9335 4650

DRAWING TITLE:

ASC Internal Power & Comms Cable Kit

REV:

A

CAB-0XXX (SALEM CODE)

*** THIS A CABLE KIT NOT A CABLE ASSEMBLY ***

Cable Detail:

Connectors: Description Parts (Qty)

AMP 87631-6 Crimp Housing, 2 Row, 2x5Way See Note1 Below(1) ASC-P100

AMP 86016-5 Crimp Socket, 24-20AWG See Note2 Below(10)

Mixed D-Type Chassis Mount 3W3 Shell See Note3 Below(1) ASC-P1

Mixed D-Type Contact,40A,Power Socket See Note4 Below(3)

ASC-C1 D-Type Plug (Male) 9Way See Note5 Below(3)

Conductors:

Cable1 20AWG Wire 10/0.25 PVC 600V Orange See Note6 Below(??)

Cable2 20AWG Wire 10/0.25 PVC 600V Black See Note6 Below(??)

Cable3 24AWG Wire, PTFE White, 7/0.2mm See Note7 Below(??)

Misc:

-

Overall Length ??+/-5mm

Notes:

1. The Housing can be supplied from Farnell #182-1260. Any equivalent will be OK refer to

data sheets supplied with this drawing.

2. The Housing Pins can be supplied from Farnell #973-300. Any equivalent will be OK,

but must match the housing refer to data sheets supplied with this drawing.

3. The Mixed D Housing can be supplied from RS #484-975. Any equivalent will be OK

refer to data sheets supplied with this drawing.

4. The Mixed D Housing Pins can be supplied from RS #485-142. Any equivalent will be

OK refer to data sheets supplied with this drawing.

5. The D-Type Plug can be supplied from Farnell #107-5335 or PSI stock CON-0124. Any

equivalent will be OK refer to data sheets supplied with this drawing.

6. The 20AWG Cable can be supplied from PSI stock (Orange = CAB-0198 & Black =

CAB-0197) and is standard 20AWG Hook-up Wire 10/0.25 PVC 600V. Any equivalent

will be OK refer to data sheets supplied with this drawing.

7. The 24AWG Cable can be supplied from Farnell #118-4030 and is standard 24AWG

Wire 7/0.2mm PTFE 300V. Any equivalent will be OK refer to data sheets supplied with

this drawing

REVISION

Date Rev Remarks

04/12/09 A Draft

CABLE DRAWING:

DRAWING NO.:

MWACAB-0007

DRAWN BY:

DRC


DATE: 15-Dec-09

SHEET: 2 of 4


DRAWING TITLE:


REV:

A


Typical Drawing:

Connection Table:

P100 Description ASC-P1

Pins(10) Pins(3)

1 +12V

2 +12V 1

3 0V

4 0V 2

NC

NC 3

ASC-C1

Pins(9)

5 (NC)

6 I2C_addr_sel 1

7 (NC) NC 2

8 I2C_sclk 3

9 (NC) NC 4

10 I2C_sdata 5

0V 6

0V 7

0V 8

0V 9

REVISION

Date Rev Remarks

04/12/09 A Draft

CABLE DRAWING:

DRAWING NO.:

MWACAB-0007

DRAWN BY:

DRC


DATE: 15-Dec-09

SHEET: 3 of 4


DRAWING TITLE:


REV:

A


Assembly Details:

CRIMPING

REVISION

Date Rev Remarks

04/12/09 A Draft

CABLE DRAWING:

DRAWING NO.:

MWACAB-0007

DRAWN BY:

DRC


DATE: 15-Dec-09

SHEET: 4 of 4


DRAWING TITLE:


REV:

A


Assembly Details (Cont’):

STRIPPING

Connection Detail:

From: (ACS-P100) Attached to the P100 Header on the ASC PCB

To: (ASC Power IN) ASC Power IN on the Front Panel

To: (ASC Control) ASC Control on the Front Panel

No mounting hardware selected

with 3,05 (.120) mounting hole

A ± 0,38 (.015) B ± 0,13 (.005) C ± 0,13 (.005) D ± 0,13 (.005) E ± 0,38 (.015) L ± 0,25 (.010) W ± 0,41 (.016) K ± 0,32 (.013)

39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 0,76 (.030) 6,94 (.273) 1,21 (.048)

0.00 0 0

DESCRIPTION MATERIAL FINISHInsulator Polyester None, (Color Black)

Shells Steel Tin

CONNECTOR, RECEPTACLE, ELECTRICALCOMBO D 3W3 SOLDER CUP

PART NO.

This is issued in strict confidence on condition that it is not used as a basis for manufacture or sale, and that it is not copied, reprinted or disclosed to a third party either wholly or in part without prior written consent of ITT Cannon.

Unless otherwise specified, dimensions are in mm & (in.)

Tolerances are (.XXX = mm) Decimals Angles

.X ± 0,20 (.008) Xo ± 1.0o

.XX ± 0,10 (.004)

.XXX ± 0,05 (.002) DAM3W3S

No mounting hardware selected

with 3,05 (.120) mounting hole

Signal contacts

not shown for clarity

A ± 0,38 (.015) B ± 0,13 (.005) C ± 0,13 (.005) D ± 0,13 (.005) E ± 0,38 (.015) L ± 0,25 (.010) W ± 0,41 (.016) K ± 0,32 (.013)

30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 0,76 (.030) 6,69 (.264) 1,21 (.048)

Solder cup signal contacts

0.00 0 0

DESCRIPTION MATERIAL FINISHInsulator Polyester None, (Color Dark Green)

Shells Steel Yellow Chromate over Zinc

Signal Contacts Copper alloy 50 microinches Gold over Nickel

Issue Date: 26-Aug-99 CONNECTOR, PLUG, ELECTRICAL

D-SUBMINIATURE 9 POSITION SOLDER CUP

PART NO. DEMM9P

This is issued in strict confidence on condition that it is not used as a basis for manufacture or sale, and that it is not copied, reprinted or disclosed to a third party either wholly or in part without prior written consent of ITT Cannon.

Unless otherwise specified, dimensions are in mm & (in.)

Tolerances are (.XXX = mm) Decimals Angles

.X ± 0,20 (.008) Xo ± 1.0o

.XX ± 0,10 (.004)

.XXX ± 0,05 (.002)

Customer Use Drawing Config Rev 8.25

HOOK-UP WIREPVC INSULATION

169

† Also meets MIL-W-76B Type LW*See color chart below

11885500 B-32 32 7/40 0.010 0,25 0.028 0,71 1–6611885511† B-30 30 7/38 0.010 0,25 0.032 0,81 1–6611885522† B-28 28 7/36 0.010 0,25 0.034 0,86 1–1011885533† B-26 26 7/34 0.010 0,25 0.038 0,96 1–1911885544† B-24 24 7/32 0.010 0,25 0.043 1,09 1–1911885544//1199 B-24 24 19/36 0.010 0,25 0.043 1,09 1–1911885555† B-22 22 7/30 0.010 0,25 0.050 1,27 1–1911885555//1199 B-22 22 19/34 0.010 0,25 0.050 1,27 1–1911885566† B-20 20 7/28 0.010 0,25 0.058 1,47 1–1911885566//1199 B-20 20 19/32 0.010 0,25 0.058 1,47 1–1911885577 B-18 18 7/26 0.010 0,25 0.068 1,73 1–1911885577//1199 B-18 18 19/30 0.010 0,25 0.068 1,73 1–1911885588//1199 B-16 16 19/29 0.010 0,25 0.077 1,96 1–1911885599//1199 B-14 14 19/27 0.010 0,25 0.091 2,31 1–10

Alpha Type Conductor Insul. Thickness Diameter StockPart No. Designation AWG Strand Inches mm Inches mm Colors*

MIL-W-16878E TYPE B105°C, 600 VOLT

PVC INSULATIONUL 1015, CSA TEW-105105°C, 600 VOLT

CHARACTERISTICSOPERATING TEMPERATURE:■ –55°C to 105°C

VOLTAGE RATING:■ 600 Volt

PRODUCT DESCRIPTION:■ Conductor: Stranded Tinned Copper■ Insulation: Color-Coded PVC

SPECIFICATIONS■ MIL-W-16878E Type B

AVAILABILITY■ 100 ft (30,5m), 1000 ft (305m) put-ups

CHARACTERISTICSOPERATING TEMPERATURE:■ –20°C to 105°C

VOLTAGE RATING:■ 600 Volt

PRODUCT DESCRIPTION:■ Conductor: Stranded Tinned Copper■ Insulation: Color-Coded PVC

SPECIFICATIONS■ UL AWM Style 1015■ CSA TEW-105

AVAILABILITY■ 100 ft (30,5m), 1000 ft (305m) put-ups

®

3070 24 7/32 0.032 0,81 0.088 2,24 1–10+283071 22 7/30 0.032 0,81 0.094 2,38 1–10+28,293073 20 10/30 0.032 0,81 0.100 2,54 1–10+283075 18 16/30 0.032 0,81 0.112 2,85 1–10+28,293077 16 26/30 0.032 0,81 0.124 3,14 1–10+28,293079 14 41/30 0.032 0,81 0.134 3,61 1–10+28,293080 12 65/30 0.032 0,81 0.162 3,93 1–44+283081 10 105/30 0.032 0,81 0.180 4,83 1–40+28

Alpha Conductor Insul. Thickness Diameter StockPart No. AWG Strand Inches mm Inches mm Colors*

*See color chart below

1–White 3–Red 5–Yellow 7–Brown 9–Gray 11–White/Black 13–White/Green 15–White/Blue 17–White/Orange 19–White/Violet 29–Yellow/Green2–Black 4–Green 6–Blue 8–Orange 10–Violet (purple) 12–White/Red 14–White/Yellow 16–White/Brown 18–White/Gray 28–Green/Yellow 30–Pink

*STOCK COLOR CHART

Web Site: www.alphawire.com Toll Free: 1-800-52 ALPHA • Telephone: 908-925-8000 • Fax: 908-925-6923Email: [email protected] Europe/UK Telephone: +44 (0) 1932 772422 • Europe/UK Fax: +44 (0) 1932 772433

derek_c

Rectangle

derek_c

Rectangle

this a cable kit not a cable assembly *** - the (new) people's …€¦ · ·...

Documents