that's how professionals do their work.

General InformatIon

All attachments, ready to install, will be provided with appropriate tool mount. Hydraulic tubes with clutches are within the scope of supply, but have to be checked and may have to be adjusted.

All indicated measures, weights, load carrying capacities, illustrations and technical information are without engagement. We reserve a design modification.

The indicated load carrying capacities refer to the attachment. The capacitys indication refers to filling capacity according ISO 7546.

Our indications are minimum face values, which the attachment can convey in accordance with appropriate use.

In case of attachments to rack vehicles with higher lifting capacity, the permitted indications of the accessory equipment (bulk, weight, load carrying capacity) may not be exceeded.

PrIces

With this price lists appearance, all previous price lists or price announcements lose validity. The same applies to all prices in EURO, mentioned on the price list, plus legal VAT.

Delivery is effected in accordance with our general terms and conditions as well as our terms of payment and delivery.

Download AGB: www.hesse-metalltechnik.deDate of price list: Nov. 2019

Our prices are calculated ex works, packing excluded and without transport insurance, extra charge for logistics € 25,- per attachment

colour cataloGue

RAL 9005 deep black

RAL 7043 grey

RAL 7024 graphite grey

Hesse metalltechnik – Your specialist for attachments and tools for

agricultural machinery and commercial vehicles

Hesse Metalltechnik GmbH, based in Bad Sassendorf / North Rhine-Westphalia, is a family-owened enterprise with a long tradition. The German Company, which was founded over 175 years ago, is specialized in producing attachments for agricultural machinery and commercial vehicles. The combination of expertise, professional know-how and innovative technology is one of our strengths. We focus on developing and refining serial and customized products to meet our customers requirements. Our wide range of products consists of attachments for front-, court-, wheel- and telescopic loaders. We offer economical and effective solutions which will convince you of the quality of our service. Special tools and tailor-made attachments are devised and developed in our own design department. We are looking forward to be your reliable partner.

Ihr Markus Hesse und Team

table of contents

Specific Weights page 6

court- and skId-skeer loader Attachments page 7–17

Manure Fork page 7

Rubber Blade, Bale Fork, Bale Grapple, Pallet Fork, High Dump Bucket page 8– 9

Light Bucket, SMART PUSH Light Bucket, Dirt Bucket, Heavy Duty Bucket page 10–11

Multipurpose Bucket 4 in 1, Bucket With Hydr. Downholder, Grapple Bucket, Silage Bucket page 12–13

Silage Bucket, SMART PUSH Silage Bucket, Manure Fork With Hydraulic Downholder,

Silage Fork With Grapple page 14–15

Crane Hook, Snow Blades, Sweeper page 16–17

frontloader Attachments page 18–38

Manure Forks page 18–19

Green Forage Fork, Rubber Blade, Bale Fork, Big Bale Fork page 20–21

Bale Grapple, Square Bale Grapple, Bale Fork Transport, Maize Pushing Blade,

Pallet Fork page 22–23

Pallet Fork, High Dump Bucket, Light Bucket page 24–25

SMART PUSH Light Buckets, Dirt Buckets page 26–27

Heavy Duty Bucket, Multipurpose Bucket 4 in 1, Potatoe Bucket, Silagecutter page 28–29

Bulky Goods Bucket, Bucket With Grapple, Grapple Bucket, Silage Bucket page 30–31

Silage Bucket, SMART PUSH Silage Buckets, Silage Fork With Grapple page 32–33

Silage Forks With Grapple, Brusk Pile Grab, Crane Hook, BIG-BAG Carrier page 34–35

Working Platforms, Snow Blades page 36–37

Rear Container, Sweeper page 38

WHeel- and telescoPIc loader Attachments page 39–64

Maize Pushing Blade page 39

Manure Forks, Green Forage Fork, Square Bale Grapple, Bale Grapple page 40–41

Bale Fork, Big Bale Fork, Pallet Fork page 42–43

Pallet Fork, Rubber Blade, Potatoe Bucket, Light Bucket page 44–45

SMART PUSH Light Buckets, Volume Light Buckets page 46–47

Volume Light Buckets, Big Volume Light Bucket, High Dump Bucket page 48–49

Dirt Bucket, Multipurpose Bucket 4 in 1, Heavy Duty Bucket, Load Bucket page 50–51

Silage Forks With Grapple, Brusk Pile Grab, Bulky Goods Bucket page 52–53

Bucket With Grapple, Silage Buckets page 54–55

Silage Buckets page 56–57

SMART PUSH Silage Buckets, Tool Carrier, Container Hook, Crane Hook page 58–59

Crane Hook, BIG-BAG Carrier, Working Platforms page 60–61

Silage Comb, Grain Pusher, Snow Blades page 62–63

Sweeper page 64

ACCESSORIES page 65–69

REPLACEMENTS AND WEAR PARTS page 70–77

FRO

NTL

OA

DER

2

00

CO

UR

T- /

Sk

ID-S

kEE

R L

OA

DER

1

00

WH

EEL-

AN

D T

ELES

CO

PIC

LO

AD

ER

30

0

6

SPECIFIC WEIGHTS FOR MATERIAL LOADED IN kG/CM

cereals kg/cm

wheat 820

rye 780

barley 640

oat 500

maize 800

rape 700

seed of grass 350

building materials kg/cm

lime 1200

grout 1750

cement 1400

adobe 1800

ground damped 2100

sand dried 1650

sand damped 2000

gravel 2000

silage kg/cm

grass 800

rye 920

maize 820

maize, CCM 850

clover 900

potatoes 1000

beet leafs 1000

straw and hay kg/cm

straw in bulk 60

straw in bale 140

hay in bulk 70

hay in bale 140

forage kg/cm

grass 350

clover 350

mineral fertiliser kg/cm

lime 1400

potash 1200

phosphate 1100

nitrate 1600

compound fertiliser 1100

carbamide 800

salpeter 1000

fuels kg/cm

logs 750

anthracite 900

briquette 1250

oak green 1000

spruce green 750

other kg/cm

snow loose 130

snow damp 550

organic fertiliser kg/cm

manure fresh 800

manure decomposed 1200

turf compressed 400

turf in bulk 70

turf damped 620

root crops kg/cm

potatoes 730

beets 700

7

manure forkfor courtloader/skid-skeer-loader

height 650 mm, tine length 800 mm, tines high value full material, thick material main tube with welded cones

width number of tines weight price

900 mm 5 93 kg 570,00 €

1000 mm 6 100 kg 580,00 €

1200 mm 7 120 kg 610,00 €

1300 mm 7 130 kg 680,00 €

1400 mm 8 140 kg 720,00 €

1500 mm 9 150 kg 780,00 €

extra charge for:

Euro-Quick-Coupler 49,00 €tine 1000 mm, each 28,00 €tine 1100 mm, each 31,00 €heavy duty tine 800 mm, each 48,00 €heavy duty tine 1000 mm, each 51,00 €

Type DG HL no. 101

ATTACHMENTS COURT- AND SkID-SkEER LOADERS 100

CO

UR

T- /

Sk

ID-S

kEE

R L

OA

DER

1

00

8

rubber bladefor courtloader/skid-skeer-loader

height 680 mm, depth 860 mm, stable steel substructure with tool holder, screwed rubber blade 460 × 40 mm reinforced with textilvariant: hydraulic slewing 50°, side inclination 40°

Type GS HL no. 117

width working width at 50° weight price

1500 mm (variant 980 mm) 165 (230) kg 700,00 €

1700 mm (variant 1100 mm) 180 (245) kg 765,00 €

2000 mm (variant 1300 mm) 200 (265) kg 830,00 €

2200 mm (variant 1420 mm) 210 (275) kg 1.000,00 €

2400 mm (variant 1550 mm) 220 (285) kg 1.060,00 €

2600 mm (variant 1680 mm) 230 (295) kg 1.130,00 €

extra charge for:

variant hydraulic slewing 50° 690,00 €Euro-Quick-Coupler 49,00 €kat I system for small size tractor 130,00 €

bale forkfor courtloader/skid-skeer-loader

height 600 mm, width 1120 mm, tine length 1000 mm, tines high value full material, thick material main tube with welded cones

number of tines capacity weight price

2 1200 kg 85 kg 585,00 €

3 1800 kg 95 kg 620,00 €

4 2400 kg 105 kg 670,00 €

extra charge for:

more width, per 100 mm 45,00 €more height, per 100 mm 42,00 €bracket, height 400 mm 165,00 €heavy duty tine 1000 mm, each 51,00 €extra tine in upper frame, each 79,00 €

Type BAS HL no. 102

9

bale Grapplefor courtloader/skid-skeer-loader

opening range 800 –1600 mm, one hydraulic cylinder

load capacity weight price

max. 1400 kg ca. 210 kg 1.295,00 €

extra charge for:

pressure limiting valve (220 bar) 170,00 €

Type RBZ HL no. 116

Type pLG HL no. 103

Pallet fork 1,5 t with tines

for courtloader/skid-skeer-loader

height 507 mm, with singly adjustable forged tines, capacity 1500 kg, LSP 500 mm, Type DIN

width tine length weight price

1000 mm 900 mm 162 kg 835,00 €

1000 mm 1000 mm 165 kg 865,00 €

1000 mm 1100 mm 170 kg 880,00 €

1000 mm 1200 mm 175 kg 895,00 €

1200 mm 900 mm 174 kg 925,00 €

1200 mm 1000 mm 179 kg 955,00 €

1200 mm 1100 mm 184 kg 970,00 €

1200 mm 1200 mm 189 kg 990,00 €

extra charge for:

more width, per 100 mm 75,00 €

Type HKS HL no. 121

High dump bucket loading goods up to 900 kg/cbm


height 770 mm, depth 920 mm, hardened cutting edge 150 × 16 mm, 500 HB, 2 hydraulic cylinders, made of fine grained steel

width volume weight price

1400 mm 560 l 350 kg 2.460,00 €

1600 mm 640 l 380 kg 2.575,00 €

1800 mm 720 l 410 kg 2.720,00 €

Extra charge for:

Euro-Quick-Coupler 49,00 € height side frame 255,00 €spill guard 150,00 €

CO

UR

T- /

Sk

ID-S

kEE

R L

OA

DER

1

00

10

Type LGS HL no. 105

light bucket loading goods up to 900 kg/cbm


height 840 mm, depth 890 mm, hardened cutting edge 110 × 12 mm, 400 HB, one inlying middle reinforcement for widths of 1400 mm


900 mm 430 l 125 kg 695,00 €

1000 mm 485 l 137 kg 735,00 €

1100 mm 530 l 149 kg 760,00 €

1200 mm 595 l 161 kg 790,00 €

1300 mm 630 l 179 kg 825,00 €

1400 mm 690 l 195 kg 875,00 €

1500 mm 740 l 208 kg 950,00 €

1600 mm 795 l 220 kg 1.020,00 €

extra charge for:

Euro-Quick-Coupler 49,00 €spill guard 150,00 €middle reinforcement, each 135,00 €cutting edge 150 × 16 mm 500 HB, per m 105,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €

Type Sp LB S HL no. 123

SMART PUSH light bucket sfor courtloader/skid-skeer-loader

loading goods up to 900 kg/cbm

height 840 mm, depth 890 mm, hardened cutting edge 150 × 16 mm 500 HB, hydraulic back board, overload safety device,pressure limiting valve, made of fine grained steelpolyamid wear plate profil, height side frame, spill guard


1200 mm 600 l 330 kg 2.150,00 €

1400 mm 690 l 385 kg 2.445,00 €

1600 mm 790 l 440 kg 2.780,00 €

1800 mm 890 l 495 kg 3.115,00 €

2000 mm 990 l 550 kg 3.450,00 €

extra charge for:

cutting edge 150 × 20 mm 500 HB, per m 125,00 €wear resistant sub-construction 290,00 €pressure holding valve (needed for special loaders) 180,00 €

11

Type SGS HL no. 106

Heavy duty bucket loading goods up to 2500 kg/cbm


height 850 mm, depth 800 mm, hardened cutting edge 150 × 16 mm, 500 HB, displayed with gravel tine, protection tube and crane hook


1100 mm 580 l 170 kg 790,00 €

1200 mm 630 l 190 kg 800,00 €

1300 mm 690 l 210 kg 840,00 €

1400 mm 740 l 230 kg 880,00 €

1500 mm 760 l 250 kg 910,00 €

1600 mm 790 l 280 kg 940,00 €

extra charge for:

crane hook 2 t 140,00 €middle reinforcement, each 120,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €screwed gravel tine, each 55,00 €welded gravel tine, each 65,00 €protection tube 220,00 €

Type ES HL no. 104

dirt bucket loading goods up to 1600 kg/cbm


height 700 mm, depth 730 mm, hardened cutting edge 110 × 12 mm, 400 HB, one inlying middle reinforcement for widths of 1200 mm


900 mm 310 l 100 kg 540,00 €

1000 mm 350 l 112 kg 585,00 €

1100 mm 385 l 124 kg 595,00 €

1200 mm 420 l 136 kg 720,00 €

1300 mm 460 l 154 kg 775,00 €

1400 mm 500 l 165 kg 855,00 €

1500 mm 525 l 178 kg 905,00 €

1600 mm 570 l 190 kg 950,00 €

Extra charge for:

Euro-Quick-Coupler 49,00 € spill guard 150,00 €middle reinforcement, each 95,00 €cutting edge 150 × 16 mm 500 HB, per m 105,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €protection tube 220,00 €screwed gravel tine, each 55,00 €welded gravel tine, heavy construction, each 65,00 €

CO

UR

T- /

Sk

ID-S

kEE

R L

OA

DER

1

00

12


900 mm 430 l 135 kg 1.240,00 €

1000 mm 485 l 147 kg 1.290,00 €

1100 mm 530 l 159 kg 1.410,00 €

1200 mm 595 l 171 kg 1.510,00 €

1300 mm 630 l 194 kg 1.580,00 €

1400 mm 690 l 205 kg 1.720,00 €

1500 mm 740 l 218 kg 1.860,00 €

1600 mm 795 l 230 kg 1.950,00 €

Type SHN HL no. 107

bucket With Hydraulic downholder for courtloader/skid-skeer-loader

height 700 mm, depth 730 mm, opening width ca. 1200 mm, hardened cutting edge 110 × 12 mm 400 HB, one inlying middle reinforcement for widths of 1200 mm, nipper knife with one hydraulic cylinder, 2 hydraulic cylinders for widths of 1300 mm

Extra charge for:

Euro-Quick-Coupler 49,00 €middle reinforcement, each 120,00 €version with 2 hydraulic cylinders 310,00 €cutting edge 150 × 16 mm 500 HB, per m 105,00 €reinforced sickles, each 19,00 €

Type KLS HL no. 113

multipurpose bucket 4 in 1 loading goods up to 2500 kg/cbm


height 750 mm, depth 425 mm, hardened cutting edge 150 × 16 mm 500 HB, 2 hydraulic cylinders


1200 mm 350 l 280 kg 2.600,00 €

1300 mm 380 l 300 kg 2.690,00 €

1400 mm 410 l 325 kg 2.790,00 €

1500 mm 440 l 350 kg 2.990,00 €

extra charge for:

crane hook 2 t 140,00 €pressure holding valve (needed for special loaders) 210,00 €screwed gravel tine, each 55,00 €welded gravel tine, each 65,00 €protection tube 220,00 €

13

Type pLK HL no. 119

Grapple bucket for courtloader/skid-skeer-loader

height 700 mm, depth 800 mm, hardened cutting edge 150 × 16 mm 500 HB, thick material main tube with welded sickles, 2 hydraulic cylinders, with removable sideparts screwed

Extra charge for:

Euro-Quick-Coupler 49,00 €cutting edge 150 × 20 mm 500 HB, per m 125,00 €wear resistant sub-construction 330,00 €reinforced sickles, each 19,00 €pressure holding valve (needed for special loaders) 210,00 €


1200 mm 500 l 290 kg 1.980,00 €

1400 mm 590 l 340 kg 2.090,00 €

1600 mm 670 l 380 kg 2.290,00 €

Type SHN M HL no. 108

silage bucket conical


height 720 mm, depth 980 mm, opening width ca. 1470 mm,hardened cutting edge 150 × 16 mm 500 HB,one inlying middle reinforcement, thick material main tube with welded sickles, 2 hydraulic cylinders, one sickle all-side


1400 mm 900 l 450 kg 2.450,00 €

1600 mm 1030 l 480 kg 2.690,00 €

extra charge for:

cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €wear resistant sub-construction 330,00 €reinforced sickles, each 19,00 €pressure holding valve (needed for special loaders) 210,00 €

CO

UR

T- /

Sk

ID-S

kEE

R L

OA

DER

1

00

14

Type SBS M HL no. 109



height 720 mm, depth 980 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 16 mm 500 HB, one inlying middle reinforcement, thick material main tube with welded cones, twist protected tines, 2 hydraulic cylinders, one sickle all-side


1400 mm 900 l 450 kg 2.590,00 €

1600 mm 1030 l 480 kg 2.790,00 €

Extra charge for:

cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €wear resistant sub-construction 330,00 €pressure holding valve (needed for special loaders) 210,00 €

Type Sp SB S HL no. 122

SMART PUSH silage bucket sfor courtloader/skid-skeer-loader

loading goods up to 900 kg/cbm

height 620 mm, depth 800 mm, variable mechanical back board, overload safety device, heavy upper looper with sickles (HB 500), open back board, made of fine grained steel, polyamid wear plate profil, hardened cutting edge 150×16 mm (HB 500)


1200 mm 440 l 340 kg 2.850,00 €

1400 mm 520 l 390 kg 3.250,00 €

1600 mm 590 l 440 kg 3.650,00 €

1800 mm 660 l 490 kg 3.950,00 €

2000 mm 740 l 530 kg 4.350,00 €

Extra charge for:


15

Type DGHN HL no. 110

manure fork With Hydraulic downholder for courtloader/skid-skeer-loader

height 650 mm, opening width ca. 1200 mm, tine length 800 mm, thick material main tube with welded cones, tines high value full material, 1 hydraulic cylinders, for widths of 1300 mm 2 hydraulic cylinders

Extra charge for:

Euro-Quick-Coupler 49,00 €heavy duty tine 800 mm, each 48,00 €reinforced sickles, each 19,00 €


900 mm 5 93 kg 1.220,00 €

1000 mm 6 100 kg 1.270,00 €

1200 mm 7 120 kg 1.370,00 €

1300 mm 7 130 kg 1.670,00 €

1400 mm 8 140 kg 1.810,00 €

1500 mm 9 150 kg 1.950,00 €

Type DUS HL no. 111

silage fork With Grapplefor courtloader/skid-skeer-loader

height 650 mm, opening width ca. 1200 mm, tine length 800 mm, thick material main tube with welded cones, high value full material, twist protected tines in the nipper knife, 1 hydraulic cylinder, for widths of 1300 mm 2 hydraulic cylinders


900 mm 5 90 kg 1.280,00 €

1000 mm 6 97 kg 1.350,00 €

1200 mm 7 115 kg 1.460,00 €

1300 mm 7 125 kg 1.730,00 €

1400 mm 8 138 kg 1.890,00 €

1500 mm 9 148 kg 2.090,00 €

Extra charge for:

Euro-Quick-Coupler 49,00 €heavy duty tine 800 mm, each 48,00 €

CO

UR

T- /

Sk

ID-S

kEE

R L

OA

DER

1

00

16

Type LH HL no. 112

crane Hook forged swivel hook


working radius load capacity weight price

500 mm 1500 kg 130 kg 990,00 €

1000 mm 1500 kg 150 kg 1.080,00 €

1500 mm 1500 kg 175 kg 1.150,00 €

Type SSD HL no. 114

snow bladefor courtloader/skid-skeer-loader

height 730 mm, infinetely variable height adjustment, vullkollan lip, hydraulic side adjustment,level compensation, brand named wheels

width working width at 30˚ weight price

1300 mm 1100 mm 165 kg 1.980,00 €

1500 mm 1300 mm 175 kg 2.030,00 €

1800 mm 1600 mm 195 kg 2.080,00 €

2000 mm 1800 mm 215 kg 2.150,00 €

Extra charge for:

Euro-Quick-Coupler 49,00 €kat I system for small size tractor 175,00 €with lamps 160,00 €polyurethane blade, per m 195,00 €wear resistant strip 500 HB, per m 135,00 €

Type SSD V HL no. 120

snow bladefor courtloader/skid-skeer-loader

height 650–750 mm, hydraulic slewing 30°, torsion resistant corpus, vullkollan lip, level compensation, height adjustable brand named wheels


1500 mm 1350 mm 210 kg 2.440,00 €

1800 mm 1650 mm 230 kg 2.600,00 €

2000 mm 1800 mm 250 kg 2.700,00 €

Extra charge for:

Euro-Quick-Coupler 49,00 €kat I system for small size tractor 175,00 €with lamps 160,00 €polyurethane blade, per m 195,00 €wear resistant strip 500 HB, per m 135,00 €

17

Type KB HL no. 115

sweeperfor courtloader/skid-skeer-loader

special main brush for snow, mechanical side adjustment, splash guard, hydraulic motor, brush ø 520 mm, height adjustable brandnamed wheels

width weight price

1500 mm 220 kg 2.780,00 €

1800 mm 245 kg 3.050,00 €

extra charge for:

hydraulic side adjustment 530,00 €hopper, mechanical emptying 510,00 €hopper, hydraulic emptying 980,00 €side brush 1.100,00 €side lamps 340,00 €

Type KB S HL no. 118

sweeperfor courtloader/skid-skeer-loader

height 380 mm, steel casing with tool holder, 8 sweeper rows of polypropylene, cleans quickly forward and backwards


1300 mm ------ 100 kg 1.200,00 €

1500 mm 1100 mm 120 kg 1.330,00 €

1800 mm 1300 mm 140 kg 1.470,00 €

2000 mm 1450 mm 160 kg 1.620,00 €

Price reduction for:

tool holder for pallet forks -120,00 €

Extra charge for:

mechanical slewing 45° 450,00 €hydraulic slewing 45° 550,00 €

CO

UR

T- /

Sk

ID-S

kEE

R L

OA

DER

1

00

18

manure fork

with auto-latch

height 700 mm, tine length 800 mm, thick material main tube with welded cones, with standard latch-trestle

size width number of tines weight price

2 850 mm 5 79 kg 380,00 €

3 1020 mm 6 89 kg 415,00 €

3 1250 mm 7 110 kg 695,00 €

3 1450 mm 8 125 kg 710,00 €

3 1650 mm 9 128 kg 780,00 €

3 1850 mm 10 135 kg 855,00 €

3 2300 mm 12 170 kg 1.030,00 €

Extra charge for:

tine 1000 mm, each 30,00 €

Type DG KL no. 201

ATTACHMENTS FRONTLOADERS 200

19

manure fork with Euro-Quick-Coupler

height 750 mm, tine length 800 mm, thick material main tube with welded cones, reinforced gusset plates


1300 mm 7 115 kg 670,00 €

1400 mm 8 130 kg 710,00 €

1600 mm 9 145 kg 785,00 €

1800 mm 10 160 kg 820,00 €

2000 mm 11 175 kg 880,00 €

2300 mm 12 200 kg 1.050,00 €

2500 mm 13 230 kg 1.210,00 €

Extra charge for:

tine 1000 mm, each 30,00 €tine 1100 mm, each 35,00 €heavy duty tine 800 mm, each 45,00 €heavy duty tine 1000 mm, each 55,00 €

Type DG EA no. 202

manure fork Xlwith Euro-Quick-Coupler

height 1250 mm, heavy duty tines length 800 mm,corpus made of fine grained steel, thick material main tube with welded cones, gusset plate, wear resistant sub-construction, reinforced Euro-Quick-Couplervertical extension mesh 500 mm


1800 mm 10 190 kg 2.190,00 €

2000 mm 11 205 kg 2.380,00 €

2300 mm 12 230 kg 2.690,00 €

2500 mm 13 250 kg 2.890,00 €

Extra charge for:

heavy duty tine 1000 mm, each 55,00 €heavy duty tine 1250 mm, each 78,00 €

Type DG XL EA no. 229 FR

ON

TLO

AD

ER

20

0

20

Green forage forkwith Euro-Quick-Coupler

height 1400 mm with vertical extension mesh, tine length 800 mm, rounded corpus made of fine grained steel, wear resistant sub-construction, thick material main tube with welded cones, special heavy duty tines 55 × 1400 mm, 2 heavy duty tines outside, length 44 × 1250 mm,

width weight price

2500 mm 560 kg 5.760,00 €

2750 mm 625 kg 6.250,00 €

3000 mm 680 kg 6.490,00 €

3500 mm 795 kg 7.430,00 €

Extra charge for:

cat coupler 380,00 €more width, per 100 mm 265,00 €

Type GGG EA no. 227

rubber bladewith Euro-Quick-Coupler

height 680 mm, depth 860 mm, stable steel substructure with tool holder, screwed rubber blade 400 × 20 mm reinforced with textil,variant: hydraulic slewing 50°, side inclination 40°

Type GS EA no. 232


2000 mm (variant 1300 mm) 200 (265) kg 920,00 €

2200 mm (variant 1420 mm) 210 (275) kg 1.010,00 €

2400 mm (variant 1550 mm) 220 (285) kg 1.140,00 €

2600 mm (variant 1680 mm) 230 (295) kg 1.210,00 €

3000 mm (variant 1930 mm) 250 (315) kg 1.350,00 €

Extra charge for:

variant hydraulic slewing 50° 690,00 € system kat II 150,00 €

21

bale forkwith Euro-Quick-Coupler

width 1120 mm, height 600 mm, tine length 1000 mm, thick material main tube with welded cones, tines high value full material, displayed with bracket

number of tines capacity weight price

2 1200 kg 85 kg 430,00 €

3 1800 kg 95 kg 480,00 €

4 2400 kg 105 kg 530,00 €

5 3000 kg 120 kg 600,00 €

Extra charge for:

NEW! Version with foldaway tines 395,00 €more width, per 100 mm 42,00 €more height, per 100 mm 38,00 €bracket, height 400 mm 180,00 €heavy duty tine 1000 mm, each 55,00 €heavy duty tine 1250 mm, each 78,00 €heavy duty tine 1400 mm, each 89,00 €extra tine in upper frame, each 70,00 €

Type BAS EA no. 203

NEW! available with foldaway tines

big bale fork with Euro-Quick-Coupler

corpus made of fine grained steel, wear resistant sub-construction,thick material main tube with welded cones, 4 heavy duty tines 44 × 1250 mm, 2 tines in upper frame 36 × 400 mm, ultimate load 4000 kg

Type GBAS EA no. 229

width height weight price

1800 mm 1800 mm 280 kg 1.750,00 €

1800 mm 2000 mm 290 kg 1.800,00 €

1800 mm 2500 mm 300 kg 1.950,00 €

2000 mm 1800 mm 290 kg 1.800,00 €

2000 mm 2000 mm 300 kg 1.850,00 €

2000 mm 2500 mm 320 kg 1.990,00 €

2500 mm 1800 mm 310 kg 1.950,00 €

2500 mm 2000 mm 320 kg 2.000,00 €

2500 mm 2500 mm 350 kg 2.140,00 €

Extra charge for:

more width, per 100 mm 45,00 €more height, per 100 mm 41,00 €heavy duty tine 1400 mm, each 89,00 €extra tine in upper frame, each 70,00 €

FRO

NTL

OA

DER

2

00

22

bale Grapplewith Euro-Quick-Coupler

opening range 800 – 1600 mm, 1 hydraulic cylinder


max. 1400 kg ca. 210 kg 1.290,00 €

Extra charge for:


Type RBZ EA no. 205

square bale Grapplewith Euro-Quick-Coupler

for round bales and square bales up to 1000 kg

height 570 mm, width 1100 mm, depth 1380 mm,opening width 2100 mm, size of bales 700 – 2100 mm2 hydraulic cylinders

weight price

ca. 300 kg 1.690,00 €

Extra charge for:


Type QBZ EA no. 238

bale fork transport with three-point-tail hydraulics CAT 1–2

weight 75 kg

Type BTG Dp no. 204 version price

mechanicly adjustable for different sizes 450,00 €

23

maize Pushing bladewith three-point-tail hydraulics cat 2-3

height ca. 1300 mm, blade made of fine-grained steel with bent edge and upper grid extension for better visibility, exchangeable HESSE adapter, special screwable rubber strip, blade with swiveling hydraulic side parts for widths of more than 3000 mm, adjustable pressure control valve

Type MSS KAT no. 223

width weight price

2500 mm 825 kg 3.950,00 €

2750 mm 875 kg 4.090,00 €

3000 mm 930 kg 4.290,00 €

4000 mm 1590 kg 8.290,00 €

5500 mm 1700 kg 9.290,00 €

Extra charge for:

additional HESSE adaptor for other agricultural machinery 885,00 €extension for CLAAS Xerion 970,00 €main tube with welded cones and heavy duty tines 1.080,00 €marker lights 495,00 €

Pallet fork without tines

with Euro-Quick-Coupler

for fork tines ISO FEM II, load capacity 2500 kg

Type pLG EA no. 206 width height weight price

1200 mm 407 mm 90 kg 410,00 €

Extra charge for:


FRO

NTL

OA

DER

2

00

24

Type pLG EA no. 207



with singly adjustable forged tines, FEM II, load capacity 2500 kg, LSP 500 mm, DIN height 507 mm


1200 mm 900 mm 162 kg 890,00 €

1200 mm 1000 mm 170 kg 920,00 €

1200 mm 1100 mm 180 kg 940,00 €

1200 mm 1200 mm 186 kg 970,00 €

1200 mm 1300 mm 200 kg 1.030,00 €

Extra charge for:


Type pLG EA 2.0 no. 228

Pallet fork 2 t with tines


with singly adjustable forged tines load capacity 2000 kg, LSP 500 mm, ISO FEM II B


1240 mm 1000 mm 140 kg 720,00 €

1240 mm 1200 mm 160 kg 770,00 €



with singly adjustable forged tines load capacity 2000 kg, LSP 500 mm, ISO FEM II B, 4 welded cones


1240 mm 1000 mm 140 kg 750,00 €

1240 mm 1200 mm 160 kg 795,00 € Type pLG BAS EA no. 219

Extra charge for:


Extra charge for:

fork tine, 1000 mm, each 36,00 €

25

Type LGS EA no. 210

light bucket conical, loading goods up to 900 kg/cbm


height 900 mm, depth 1030 mm, hardened cutting edge 150 × 16 mm 500 HB,inlying middle reinforcement for widths of 2200 mm


1300 mm 760 l 240 kg 840,00 €

1500 mm 890 l 262 kg 905,00 €

1600 mm 950 l 275 kg 970,00 €

1800 mm 1080 l 310 kg 1.060,00 €

2000 mm 1210 l 330 kg 1.170,00 €

2200 mm 1340 l 350 kg 1.260,00 €

2500 mm 1530 l 400 kg 1.430,00 €

2800 mm 1720 l 430 kg 1.640,00 €

3000 mm 1850 l 450 kg 1.860,00 €

Extra charge for:

spill guard, ca. 1250 × 200 mm 175,00 €middle reinforcement, each 170,00 €cutting edge 150 × 20 mm 500 HB, per m 125,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €screwed polyurethan cutting edge, per m 230,00 €wear resistant sub-construction 395,00 €

Type HKS EA no. 235



height 1120 mm, depth 1320 mm, hardened cutting edge 150 × 16 mm 500 HB,2 hydraulic cylinders, made of fine grained steel


1600 mm 640 l 370 kg 2.775,00 €

1800 mm 720 l 400 kg 2.920,00 €

2000 mm 800 l 430 kg 3.050,00 €

2200 mm 880 l 460 kg 3.220,00 €

2400 mm 960 l 490 kg 3.440,00 €

Extra charge for:

height side frame 250,00 €spill guard 175,00 €

FRO

NTL

OA

DER

2

00

26

Type Sp LB M EA no. 242

SMART PUSH light bucket mEuro-Quick-Coupler loading goods up to 900 kg/cbm

height 910 mm, depth 1200 mm, hydraulic back board, overload safety device, pressure limiting valve, made of fine grained steel, polyamid wear plate profil, height side frame, spill guard, hardened cutting edge 200 × 20 mm 500 HB

Type Sp LB S EA no. 241

SMART PUSH light bucket sEuro-Quick-Coupler loading goods up to 900 kg/cbm

height 840 mm, depth 890 mm, hydraulic back board, overload safety device, pressure limiting valve, made of fine grained steel, polyamid wear plate profil, height side frame, spill guard, hardened cutting edge 150 × 16 mm 500 HB


1200 mm 600 l 330 kg 2.250,00 €

1400 mm 690 l 385 kg 2.545,00 €

1600 mm 790 l 440 kg 2.880,00 €

1800 mm 890 l 495 kg 3.215,00 €

2000 mm 990 l 550 kg 3.550,00 €

Extra charge for:

hardened cutting edge 150 × 20 mm 500 HB, per m 125,00 €wear resistant sub-construction 290,00 €pressure holding valve (needed for special loaders) 180,00 €


2000 mm 1600 l 610 kg 3.750,00 €

2200 mm 1760 l 680 kg 4.050,00 €

2400 mm 1920 l 740 kg 4.395,00 €

2500 mm 2000 l 780 kg 4.590,00 €

2600 mm 2080 l 815 kg 4.780,00 €

2800 mm 2240 l 880 kg 5.150,00 €

3000 mm 2400 l 940 kg 5.500,00 €

extra charge for:

cutting edge with screwed knife 200 × 20 mm 500 HB, per m 220,00 €wear resistant sub-construction 340,00 €gaskets of back board for flowable goods e.g. rape and corn 350,00 €

27

Type ES KL no. 208

dirt bucket loading goods up to 1600 kg/cbm

with auto-latch

height 560 mm, depth 630 mm

Größe width volume weight price

2 850 mm 215 l 75 kg 330,00 €

3 1020 mm 260 l 90 kg 355,00 €

Type ES EA no. 209

dirt bucket conical, loading goods up to 1600 kg/cbm


height 720 mm, depth 980 mm, hardened cutting edge 150 × 16 mm 500 HBinlying middle reinforcement,2 inlying middle reinforcements for widths of 2200 mm


1300 mm 620 l 195 kg 730,00 €

1500 mm 715 l 225 kg 760,00 €

1600 mm 760 l 240 kg 805,00 €

1800 mm 860 l 255 kg 840,00 €

2000 mm 965 l 275 kg 890,00 €

2200 mm 1065 l 305 kg 980,00 €

2500 mm 1215 l 345 kg 1.090,00 €

2800 mm 1370 l 375 kg 1.260,00 €

3000 mm 1470 l 395 kg 1.370,00 €

Extra charge for:

spill guard, ca. 1250 × 200 mm 175,00 €cutting edge 150 × 20 mm 500 HB, per m 125,00 €cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €screwed polyurethan cutting edge, per m 230,00 €screwed gravel tine, each 59,00 €welded gravel tine, each 69,00 €wear resistant sub-construction 395,00 €protection tube 245,00 €

Extra charge for:

cutting edge 150 × 16 mm 500 HB, per m 105,00 € screwed gravel tine, each 59,00 €welded gravel tine, each 69,00 €

FRO

NTL

OA

DER

2

00

28

Type KLS EA no. 222

multipurpose bucket 4 in 1 loading goods up to 2500 kg /cbm




1600 mm 570 l 375 kg 2.980,00 €

1800 mm 640 l 425 kg 3.290,00 €

2000 mm 720 l 475 kg 3.590,00 €

2200 mm 795 l 495 kg 3.930,00 €

2500 mm 900 l 540 kg 4.280,00 €

Extra charge for:

crane hook 3 t 195,00 €screwed gravel tine, each 59,00 €welded gravel tine, each 69,00 €protection tube 245,00 €

Type SGS EA no. 211



height 850 mm, depth 800 mm, hardened cutting edge 150 × 20 mm 500 HB, spill guard, inlying middle reinforcement for widths of 2000 mm


1500 mm 740 l 250 kg 960,00 €

1600 mm 790 l 280 kg 980,00 €

1800 mm 910 l 300 kg 1.030,00 €

2000 mm 1010 l 340 kg 1.100,00 €

2200 mm 1120 l 380 kg 1.160,00 €

2400 mm 1220 l 420 kg 1.290,00 €

2600 mm 1320 l 455 kg 1.490,00 €

2800 mm 1430 l 490 kg 1.590,00 €

Extra charge for:

crane hook 3 t 195,00 €middle reinforcement, each 170,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €screwed gravel tine, each 59,00 €welded gravel tine, each 69,00 €wear resistant sub-construction 395,00 €protection tube 245,00 €

29


1800 mm 900 l 300 kg 1.750,00 €

2000 mm 1000 l 315 kg 1.880,00 €

2200 mm 1100 l 330 kg 2.080,00 €

2400 mm 1200 l 345 kg 2.280,00 €

2600 mm 1300 l 360 kg 2.490,00 €

Type KTS EA no. 239

Potatoe bucket loading goods up to 1000 kg/cbm


height 910 mm, depth 1140 mm, hardened cutting edge 150 × 16 mm 500 HB, body off welded full round steel, rounded side panels, clear width between the round steels 55 mm

Extra charge for:

cutting edge 200 × 20 mm 500 HB, per m 145,00 € height side frame 250,00 €spill guard 190,00 €

neW!


1100 mm 630 l (Block 1050 × 800 × 750 mm) 430 kg 2.860,00 €

1300 mm 750 l (Block 1250 × 800 × 750 mm) 455 kg 3.110,00 €

1500 mm 870 l (Block 1450 × 800 × 750 mm) 475 kg 3.360,00 €

1700 mm 990 l (Block 1650 × 800 × 750 mm) 500 kg 3.610,00 € Type SSZ EA no. 240

silagecutter with Euro-Quick-Coupler

height 890 mm, depth 1010 mm, opening width ca. 850 mm, thick material main tube with welded cones,full material cranked tines 800 mm, 2 hydraulic cylinders

Extra charge for:

heavy duty tine 800 mm 45,-€

pressure limiting valve (220 bar) 210,-€

pressure holding valve (needed for special loaders) 250,-€

neW!

FRO

NTL

OA

DER

2

00

30


1600 mm 1030 l 510 kg 3.620,00 €

1800 mm 1160 l 535 kg 3.730,00 €

2000 mm 1290 l 575 kg 3.910,00 €

2200 mm 1490 l 610 kg 4.080,00 €

2500 mm 1620 l 660 kg 4.240,00 €

Type ESG EA no. 220

bulky Goods bucket conical


height 720 mm, depth 980 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 20 mm 500 HB, wear resistant sub-construction, inlying middle reinforcement, removable sideparts screwed, 2 inlying middle reinforcements for widths of 2200 mm,thick material main tube with reinforced graps, 2 hydraulic cylinders, adjustable pressure limiting valve

Extra charge for:

cutting edge 200 × 20 mm 500 HB, per m 145,00 € cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €one more supporting point at the grapple 350,00 €oil flow divider 90 l/min 320,00 €


1600 mm 1030 l 510 kg 3.250,00 €

1800 mm 1160 l 535 kg 3.360,00 €

2000 mm 1290 l 575 kg 3.540,00 €

2200 mm 1490 l 610 kg 3.710,00 €

2500 mm 1620 l 660 kg 3.880,00 €

Type RSS EA no. 221

bucket With Grapple conical


height 720 mm, depth 980 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 20 mm 500 HB, inlying middle reinforcement, removable sideparts screwed, 2 inlying middle reinforcements for widths of 2200 mm,thick material main tube with welded cones and twist protected tines, 2 hydraulic cylinders

Extra charge for:

cutting edge 200 × 20 mm 500 HB, per m 145,00 € cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €one more supporting point at the grapple 350,00 €oil flow divider 90 l/min 320,00 €wear resistant sub-construction 395,00 €

31

Type SHN M EA no. 212



height 720 mm, depth 980 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 16 mm 500 HB, inlying middle reinforcement, 2 inlying middle reinforcements for widths of 2200 mm,thick material main tube with welded sickles, 1 sickle all-side, 2 hydraulic cylinders

extra charge for:

cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €one more supporting point at the grapple 350,00 €oil flow divider 90 l/min 320,00 €wear resistant sub-construction 395,00 €reinforced sickles, each 25,00 €closed sideparts of the grapple 740,00 €


1600 mm 1030 l 510 kg 2.530,00 €

1800 mm 1160 l 535 kg 2.830,00 €

2000 mm 1290 l 575 kg 2.940,00 €

2200 mm 1490 l 610 kg 3.190,00 €

2500 mm 1620 l 660 kg 3.300,00 €

2800 mm 1820 l 720 kg 3.600,00 €

Type pLK EA no. 236

Grapple bucket with Euro-Quick-Coupler

height 700 mm, depth 800 mm, hardened cutting edge 150 × 16 mm 500 HB, made of fine grained steel, thick material main tube with welded sickles, 2 hydraulic cylinders, removable sideparts screwed

Extra charge for:

cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €wear resistant sub-construction 395,00 €reinforced sickles, each 25,00 €


1600 mm 670 l 380 kg 2.490,00 €

1800 mm 750 l 420 kg 2.690,00 €

2000 mm 820 l 460 kg 2.830,00 €

2200 mm 890 l 500 kg 2.970,00 €

2500 mm 990 l 560 kg 3.140,00 €

FRO

NTL

OA

DER

2

00

32

Type SBS M EA no. 213



height 720 mm, depth 980 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 16 mm 500 HB, inlying middle reinforcement, 2 inlying middle reinforcements for widths of 2200 mm,thick material main tube with welded cones and twist-protected tines2 hydraulic cylinders, 1 sickle all-side


1600 mm 1030 l 510 kg 2.860,00 €

1800 mm 1160 l 535 kg 2.970,00 €

2000 mm 1290 l 575 kg 2.990,00 €

2200 mm 1490 l 610 kg 3.160,00 €

2500 mm 1620 l 660 kg 3.420,00 €

2800 mm 1820 l 720 kg 3.760,00 €

extra charge for:

cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €one more supporting point at the grapple 350,00 €oil flow divider 90 l/min 320,00 €wear resistant sub-construction 395,00 €closed sideparts of the grapple 740,00 €

Type Sp SB S EA no. 243

SMART PUSH silage bucket sEuro-Quick-Coupler loading goods up to 900 kg/cbm

height 620 mm, depth 800 mm, variable mechanical back board, over-load safety device, heavy upper looper with sickles HB 500, open back board, made of fine grained steel, polyamid wear plate profil, hardened cutting edge 150 × 16 mm 500 HB


1200 mm 440 l 340 kg 2.850,00 €

1400 mm 520 l 390 kg 3.250,00 €

1600 mm 590 l 440 kg 3.650,00 €

1800 mm 660 l 490 kg 3.950,00 €

2000 mm 740 l 530 kg 4.350,00 €

Extra charge for:


33

Type DGHN EA no. 214

silage fork With Grapplewith Euro-Quick-Coupler

height 750 mm, tine length 800 mm, opening width ca. 1200 mm, thick material main tube with welded cones, tines high value full material, 2 hydraulic cylinders


1600 mm 9 365 kg 2.250,00 €

1800 mm 10 410 kg 2.350,00 €

2000 mm 11 450 kg 2.590,00 €

2300 mm 12 510 kg 2.840,00 €

2500 mm 13 580 kg 3.090,00 €

extra charge for:

heavy duty tine 800 mm, each 45,00 €reinforced sickle, each 25,00 €sickle outside, each 75,00 €oil flow divider 90 l/min 320,00 €


1400 mm 730 l 490 kg 3.950,00 €

1600 mm 840 l 530 kg 4.250,00 €

1800 mm 940 l 580 kg 4.650,00 €

2000 mm 1040 l 620 kg 5.050,00 €

2200 mm 1155 l 680 kg 5.450,00 €

2300 mm 1210 l 710 kg 5.650,00 €

2500 mm 1310 l 775 kg 5.950,00 €

2600 mm 1365 l 800 kg 6.150,00 €

2800 mm 1470 l 865 kg 6.350,00 €

extra charge for:

cutting edge 200×20mm 500 HB, per m 120,00 €cutting edge with screwed knife 200×20mm 500 HB, per m 220,00 €one more supporting point at the grapple 295,00 €wear resistant sub-construction 340,00 €reinforced sickle, each 20,00 €pressure limiting valve (220 bar) 150,00 €pressure holding valve (needed for special loaders) 180,00 €

Type Sp SB M EA no. 244

SMART PUSH silage bucket m Euro-Quick-Coupler loading goods up to 900 kg/cbm

height 700 mm, depth 940 mm, 4 supporting points at the grapple for widths of 2800 mm, variable mechanical back board, overload safety device, heavy upper looper with sickles (HB 500), open back board, made of fine grained steel, polyamid wear plate profil, hardened cutting edge 150 × 16 mm 500 HB

FRO

NTL

OA

DER

2

00

34

Type DUS EA no. 215

silage fork With Grapple with Euro-Quick-Coupler

height 750 mm, tine length 800 mm, opening width ca. 1500 mm, thick material main tube with welded cones, tines high value full material, twist-protected tines in the nipper knife, 2 hydraulic cylinders


1600 mm 9 395 kg 2.400,00 €

1800 mm 10 440 kg 2.500,00 €

2000 mm 11 495 kg 2.740,00 €

2300 mm 12 550 kg 2.990,00 €

2500 mm 13 585 kg 3.290,00 €

Type DUS SLZ EA no. 215 aFrachtkostenanteil innerhalb Deutschlands 140,00 €

silage fork With Grapple with heavy duty tines


height 750 mm, tine length 800 mm, opening width ca. 1500 mm, thick material main tube with welded cones, heavy duty tines, twist-protected tines in the nipper knife, 2 hydraulic cylinders


1600 mm 9 415 kg 2.740,00 €

1800 mm 10 460 kg 2.890,00 €

2000 mm 11 515 kg 2.990,00 €

2300 mm 12 570 kg 3.170,00 €

2500 mm 13 630 kg 3.450,00 €

extra charge for:

oil flow divider 90 l/min 320,00 €tine outside, 600 mm, each 89,00 €

extra charge for:

oil flow divider 90 l/min 320,00 €tine outside 600 mm, each 89,00 €

35

Type LH EA no. 216

crane hook forged swivel hook


load capacity working radius weight price

1500 kg 500 mm 130 kg 1.090,00 €

1500 kg 1000 mm 150 kg 1.190,00 €

1500 kg 1500 mm 180 kg 1.290,00 €

1500 kg 2000 mm 200 kg 1.390,00 €

2500 kg 500 mm 150 kg 1.290,00 €

2500 kg 1000 mm 170 kg 1.400,00 €

2500 kg 1500 mm 200 kg 1.500,00 €

2500 kg 2000 mm 220 kg 1.590,00 €

Type RSG EA no. 230

brusk Pile Grabwith Euro-Quick-Coupler

height 750 mm, tine length 800 mm, opening width ca. 1200 mm, corpus made of fine grained steel, thick material main tube with welded cones, heavy duty tines, wear resistant sub-construction, reinforced sickles on the grapple, 2 hydraulic cylinders


1600 mm 9 395 kg 2.940,00 €

1800 mm 10 440 kg 3.090,00 €

2000 mm 11 480 kg 3.210,00 €

2300 mm 12 540 kg 3.370,00 €

2500 mm 13 610 kg 3.650,00 €

Extra charge for:

oil flow divider 90 l/min 320,00 €

bIG-baG carrierwith Euro-Quick-Coupler

mechanicly adjustable in 3 heights 1200 – 1800 mm,crane hook in three-steps adjustable


1000 kg 1000 mm 165 kg 1.080,00 €

1500 kg 1000 mm 185 kg 1.190,00 € Type BBT EA no. 217

FRO

NTL

OA

DER

2

00

36

Type AK EA no. 218

Working Platformwith Euro-Quick-Coupler

size ca. 1154 × 1224 mm, lifting force 300 kg,interlocking divice for fork tines,selflocking door 600 × 900 mm,non-slip base, fold-away safety guard

lifting force weight price

300 kg 170 kg 1.350,00 €

Type AK II EA no. 226

Working Platformwith Euro-Quick-Coupler

size ca. 1100 × 2000 mm, lifting force 300 kg,interlocking divice for fork tines,selflocking door 600 × 900 mm,non-slip base, fold-away safety guard,


300 kg 260 kg 2.750,00 €

extra charge for:

wooden edge guard 240,00 €hot-dip galvanised 550,00 €height up 1000 mm 750,00 €

extra charge for:

wooden edge guard 380,00 €hot-dip galvanised 750,00 €

37

Type SSD V EA no. 234

snow bladewith Euro-Quick-Coupler

height 650–750 mm, height 830–970 mm for width of 2200 mm, vullkollan lip, torsion resistant corpus, hydraulic slewing 30°, level compensation, height adjustable brand named wheels


1500 mm 1350 mm 210 kg 2.790,00 €

1800 mm 1650 mm 230 kg 2.990,00 €

2000 mm 1800 mm 250 kg 3.050,00 €

2200 mm 1950 mm 350 kg 3.660,00 €

2600 mm 2280 mm 370 kg 3.840,00 €

2900 mm 2550 mm 400 kg 4.190,00 €

extra charge for:

kat I system for small size tractor 195,00 €with lamps 180,00 €polyurethane blade, per m 250,00 €wear resistant blade 500 HB, per m 150,00 €

Type SSD EA no. 224


1500 mm 1300 mm 175 kg 2.350,00 €

1800 mm 1600 mm 195 kg 2.390,00 €

2000 mm 1800 mm 215 kg 2.450,00 €

2200 mm 1920 mm 330 kg 3.080,00 €

2600 mm 2280 mm 340 kg 4.220,00 €

2900 mm 2550 mm 360 kg 3.390,00 €

extra charge for:

three-point-tail hydraulics cat 2–3 195,00 €with lamps 180,00 €polyurethane blade, per m 250,00 €wear resistant blade 500 HB, per m 150,00 €

snow bladewith Euro-Quick-Coupler

height 730 mm, 880 mm height for width of 2200 mm,vullkollan lip, torsion resistant corpus,hydraulic slewing 30°, level compensation,height adjustable brand named wheels

FRO

NTL

OA

DER

2

00

38

rear container with kAT 1 and 2 loader

height 960 –600/400 mm, torsion-resistant hollowmechanically tiltable, removable side,hardened cutting edge, Pulverbeschichtung

kAT I – II for tractors and compact tractor

width weight price

1200 mm 120 kg 720,00 €

1500 mm 140 kg 780,00 €

1800 mm 160 kg 890,00 €

Type HCT Dp no. 237

width weight price

1500 mm 309 kg 3.350,00 €

1800 mm 335 kg 3.580,00 €

2300 mm 370 kg 3.900,00 €

Extra charge for:

three-point-tail hydraulics cat 2–3 480,00 €hydraulic side adjustment 580,00 €hopper, mechanical emptying 980,00 €

width arbeitsbreite bei 45° weight price

2400 mm 1700 mm 210 kg 1.990,00 €

2800 mm 2000 mm 240 kg 2.230,00 €

3200 mm 2280 mm 280 kg 2.540,00 €

hopper, hydraulic emptying 1.550,00 €water spray system 1.450,00 €side brush 1.250,00 €side lamps 390,00 €

Type KB EA no. 225

sweeperwith Euro-Quick-Coupler

special main brush for snow, ø 520 mm, hydraulic motor

Type KB S EA no. 233

sweeperwith Euro-Quick-Coupler



tool holder for pallet forks -120,00 €

Extra charge for:


39

maize Pushing bladefor wheel- or telescopic loader

height ca. 1300 mm, blade made of fire grained steel with bent edge and upper grid extension for better visibility, exchangeable HESSE adapter, special screwable rubber strip, blade with swiveling hydraulic side parts for widths of more than 3000 mm, adjustable pressure control valve

Type MSS RL/TL no. 328

width weight price

2500 mm 855 kg 4.450,00 €

2750 mm 900 kg 4.600,00 €

3000 mm 985 kg 4.830,00 €

4000 mm 1650 kg 8.790,00 €

5500 mm 1780 kg 9.550,00 €

Extra charge for:

additional HESSE adaptor for other agricultural machinery 970,00 €extended mounting 500 mm for better visibility 980,00 €main tube with welded cones and heavy duty tines 1.080,00 €marker lights 480,00 €

ATTACHMENTS WHEEL- AND TELESCOPIC LOADERS 300

WH

EEL-

AN

D T

ELES

CO

PIC

LO

AD

ER

30

0

40

manure fork for wheel- or telescopic loader

height 780 mm, tine length 1000 mm, thick material main tube with welded cones, wear resistant sub-construction, tines high value full material


1600 mm 9 250 kg 1.390,00 €

1800 mm 10 280 kg 1.480,00 €

2000 mm 11 310 kg 1.550,00 €

2300 mm 12 340 kg 1.720,00 €

2500 mm 13 370 kg 1.820,00 €

2800 mm 14 410 kg 2.290,00 €

3000 mm 15 460 kg 2.350,00 €

Type DG RL/TL no. 301

Extra charge for:

heavy duty tine 1000 mm incl. reinforcement bushes, each 65,00 €heavy duty tine 1250 mm incl. reinforcement bushes, each 90,00 €heavy duty tine 1400 mm incl. reinforcement bushes, each 105,00 €

manure fork Xl with vertical extension

for wheel- or telescopic loader

height 1280 mm, tine length 1000 mm, vertical extension mesh 500 mm,corpus made of fine grained steel, thick material main tube with welded cones, heavy duty tines, one tine all-side length 800 mm, gusset plate, wear resistant sub-construction


1800 mm 10 330 kg 2.490,00 €

2000 mm 11 360 kg 2.680,00 €

2300 mm 12 390 kg 2.990,00 €

2500 mm 13 420 kg 3.190,00 €

2800 mm 14 470 kg 3.390,00 €

3000 mm 15 530 kg 3.590,00 €

Type DG XL RL/TL no. 339

Extra charge for:

heavy duty tine 1250 mm incl. reinforcement bushes, each 90,00 €

41

bale Grapplefor wheel- or telescopic loader

opening range 800–1600 mm, with hydraulic cylinders

capacity weight price

max. 1400 kg ca. 270 kg 1.990,00 € Type RBZ RL/TL no. 303

Extra charge for:


width weight price

2500 mm 560 kg 5.590,00 €

2750 mm 625 kg 5.925,00 €

3000 mm 680 kg 6.450,00 €

3500 mm 795 kg 7.385,00 €

4000 mm 910 kg 8.290,00 €

Type GGG RL/TL no. 333

Green forage forkfor wheel- or telescopic loader

height 1400 mm, special heavy duty tines 55 × 1400 mm, rounded corpus made of fine grained steel, thick material main tube with welded cones, height 1400 mm with vertical extension mesh, wear resistant sub-construction, 2 heavy duty tines outside 44 × 1250 mm

Extra charge for:

more width, je 100 mm 290,00 €

Type QBZ RL/TL no. 348

square bale Grapplefor wheel- or telescopic loader

height 570 mm, width 1100 mm, depth 1380 mm,for square bales and round bales up to 1000 kgopening width 2100 mm, bale size 700 – 2100 mm2 hydraulic cylinders

weight price

ca. 350 kg 2.290,00 €

Extra charge for:

pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €

WH

EEL-

AN

D T

ELES

CO

PIC

LO

AD

ER

30

0

42

bale fork NEW! optional adjustable in height hydraulic


width 1250 mm, height 1300 mm, tine length 1000 mm, thick material main tube with welded cones, wear resistant sub-construction,

displayed with adjustable height hydraulic and foldaway tines

number of tines load capacity weight price

2 1200 kg 190 kg 930,00 €

3 1800 kg 195 kg 980,00 €

4 2400 kg 200 kg 1.030,00 €

5 3000 kg 205 kg 1.080,00 € Type BAS RL/TL no. 302

big bale fork for wheel- or telescopic loader

4 heavy duty tines 44 × 1250 mm, corpus made of fine grained steel, wear resistant sub-construction, thick material main tube with welded cones, 2 tines in upper frame 36 × 400 mm, ultimate load max. 4000 kg

Type GBAS RL/TL no. 334


1800 mm 1800 mm 280 kg 1.870,00 €

1800 mm 2000 mm 290 kg 1.920,00 €

1800 mm 2500 mm 300 kg 2.070,00 €

2000 mm 1800 mm 290 kg 1.920,00 €

2000 mm 2000 mm 300 kg 1.970,00 €

2000 mm 2500 mm 320 kg 2.110,00 €

2500 mm 1800 mm 310 kg 2.070,00 €

2500 mm 2000 mm 320 kg 2.120,00 €

2500 mm 2500 mm 350 kg 2.260,00 €

Extra charge for:

NEW! foldaway tines 390,00 €NEW! adjustable in height hydraulic 750,00 €more width, per 100 mm 52,00 €more height, per 100 mm 45,00 €bracket, height 700 mm 350,00 €heavy duty tine 1000 mm, each 59,00 € heavy duty tine 1250 mm, each 79,00 €heavy duty tine 1400 mm, each 85,00 €extra tine in upper frame, each 65,00 € hydraulic push off wall with pressure limiting value 1.180,00 €

Extra charge for:

more width, per 100 mm 49,00 €more height, per 100 mm 45,00 €heavy duty tine 1400 mm, each 92,00 €extra tine in upper frame, each 75,00 €

43

Type pLG 2.5 t RL/TL no. 304



with singly adjustable forged tines, load capacity 2500 kg, LSP 500 mm, ISO FEM II B


1200 mm 900 mm 216 kg 1.290,00 €

1200 mm 1000 mm 222 kg 1.340,00 €

1200 mm 1100 mm 228 kg 1.370,00 €

1200 mm 1200 mm 234 kg 1.390,00 €

Type pLG 3.5 t RL/TL no. 304 a



with singly adjustable forged tines, load capacity 3500 kg, LSP 500 mm, ISO FEM III B


1200 mm 900 mm 282 kg 1.490,00 €

1200 mm 1000 mm 288 kg 1.520,00 €

1200 mm 1100 mm 292 kg 1.590,00 €

1200 mm 1200 mm 297 kg 1.630,00 €

Type pLG 4.5 t RL/TL no. 304 b





1200 mm 1000 mm 300 kg 1.590,00 €

1200 mm 1100 mm 310 kg 1.650,00 €

1200 mm 1200 mm 320 kg 1.700,00 €

1200 mm 1500 mm 390 kg 2.050,00 €

Extra charge for:


Extra charge for:


Extra charge for:


WH

EEL-

AN

D T

ELES

CO

PIC

LO

AD

ER

30

0

44

Type pLG 5.0 t RL/TL no. 304 c





1200 mm 1000 mm 330 kg 1.890,00 €

1200 mm 1100 mm 340 kg 1.990,00 €

1200 mm 1200 mm 350 kg 2.050,00 €

1200 mm 1500 mm 420 kg 2.150,00 €

Type pLG 6.0 t RL/TL no. 304 d



with singly adjustable forged tines, load capacity 6000 kg, LSP 500 mm, ISO FEM IV B


1400 mm 1200 mm 450 kg 2.320,00 €

1400 mm 1300 mm 460 kg 2.450,00 €

1400 mm 1500 mm 490 kg 2.590,00 €

Extra charge for:


Extra charge for:


rubber bladefor wheel- or telescopic loader

height 680 mm, depth 860 mm, stable steel substructure with tool holder, screwed rubber blade 460 × 40 mm reinforced with textil variant: hydraulic slewing 50°, side inclination 40°

Type GS RL/TL no. 340


2000 mm (variant 1300 mm) 230 (295) kg 1.170,00 €

2200 mm (variant 1420 mm) 240 (305) kg 1.260,00 €

2400 mm (variant 1550 mm) 250 (315) kg 1.390,00 €

2600 mm (variant 1680 mm) 260 (325) kg 1.460,00 €

3000 mm (variant 1930 mm) 280 (345) kg 1.600,00 €

Extra charge for:

variant hydraulic slewing 50° 690,00 €

45


1800 mm 900 l 340 kg 2.050,00 €

2000 mm 1000 l 355 kg 2.180,00 €

2200 mm 1100 l 370 kg 2.380,00 €

2400 mm 1200 l 385 kg 2.580,00 €

2600 mm 1300 l 400 kg 2.790,00 €

2800 mm 1400 l 415 kg 2.990,00 €

Type KTS RL/TL no. 349

Potatoe bucket loading goods up to 1000 kg/cbm


height 910 mm, depth 1140 mm, hardened cutting edge 150 × 20 mm 500 HB, corpus of welded full round steel, rounded side panels, clear width between the round steels 55mm

Extra charge for:

cutting edge 200 × 20 mm 500 HB, per m 145,00 € height side frame 250,00 €spill guard (complete width) 190,00 €

neW!

Type LGS RL/TL no. 306

light bucket loading goods up to 900 kg/cbm


height 970 mm, depth 1170 mm, hardened cutting edge 150 × 20 mm 500 HB, inlying middle reinforcement, 2 inlying middle reinforcements for widths of 2200 mm, loss of reinforcement: with hardenend cutting edge 200 × 20 mm and wear resistant sub-construction


1600 mm 1280 l 380 kg 1.450,00 €

1800 mm 1440 l 395 kg 1.550,00 €

2000 mm 1610 l 410 kg 1.595,00 €

2200 mm 1770 l 465 kg 1.670,00 €

2500 mm 2030 l 485 kg 2.150,00 €

2600 mm 2110 l 500 kg 2.230,00 €

2800 mm 2280 l 520 kg 2.300,00 €

3000 mm 2440 l 545 kg 2.490,00 €

extra charge for:

height side frame 250,00 €spill guard 175,00 €cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €screwed polyurethan cutting edge, per m 230,00 €wear resistant sub-construction 395,00 €

WH

EEL-

AN

D T

ELES

CO

PIC

LO

AD

ER

30

0

46

Type Sp LB M RL/TL no. 350

SMART PUSH light bucket mfor wheel- or telescopic loader loading goods up to 900 kg/cbm

height 910 mm, depth 1200 mm, variable mechanical back board, overload safety device, pressure limiting valve (220 bar), made of fine grained steel, polyamid wear plate profil, height side frame, spill guard, hardened cutting edge 200 × 20 mm 500 HB


2000 mm 1600 l 610 kg 3.750,00 €

2200 mm 1760 l 680 kg 4.050,00 €

2400 mm 1920 l 740 kg 4.395,00 €

2500 mm 2000 l 780 kg 4.590,00 €

2600 mm 2080 l 815 kg 4.780,00 €

2800 mm 2240 l 880 kg 5.150,00 €

3000 mm 2400 l 940 kg 5.500,00 €

extra charge for:

cutting edge with screwed knife 200 × 20 mm 500 HB, per m 220,00 €wear resistant sub-construction 340,00 €gaskets of back board for flowable goods e.g. rape and corn 350,00 €

Type Sp LB L RL/TL no. 351

SMART PUSH light bucket lfor wheel- or telescopic loader loading goods up to 900 kg/cbm

height 1390 mm, depth 1360 mm, variable mechanical back board, overload safety device, pressure limiting valve (220 bar), made of fine grained steel, polyamid wear plate profil, height side frame, spill guard, hardened cutting edge 250 × 25 mm 500 HB


2400 mm 3260 l 1140 kg 6.220,00 €

2500 mm 3400 l 1190 kg 6.390,00 €

2600 mm 3530 l 1240 kg 6.550,00 €

2800 mm 3800 l 1340 kg 6.950,00 €

3000 mm 4100 l 1440 kg 7.490,00 €

extra charge for:

cutting edge with screwed knife 250 × 25 mm 500 HB, per 175,00 €cutting edge 300 × 30 mm 500 HB, per m 140,00 €cutting edge with screwed knife 300 × 30 mm 500 HB, per m 320,00 €wear resistant sub-construction 340,00 €gaskets of back board for flowable goods e.g. rape and corn 350,00 €

47

Type VLS M RL/TL no. 354

Volume light bucket m loading goods up to 1600 kg/cbm


height 1090 mm, depth 1150 mm, hardened cutting edge 200 × 20 mm 500 HB, without inlying middle reinforcement, made of fine grained steel


2000 mm 2160 l 650 kg 2.390,00 €

2200 mm 2380 l 670 kg 2.600,00 €

2400 mm 2590 l 690 kg 2.700,00 €

2500 mm 2700 l 715 kg 2.800,00 €

2600 mm 2800 l 725 kg 2.990,00 €

2800 mm 3020 l 780 kg 3.250,00 €

3000 mm 3200 l 850 kg 3.550,00 €

extra charge for:

height side frame 250,00 €spill guard 175,00 €screwed knife 200 x 20 mm 500 HB, per m 145,00 €cutting edge 300 × 30 mm 500 HB, per m 160,00 €cutting edge with screwed knife 250 x 25 mm 500 HB, per m 350,00 €screwed polyurethan cutting edge, per m 230,00 €wear resistant sub-construction 395,00 €

Type VLS RL/TL no. 307

Volume light bucket loading goods up to 900 kg/cbm


height 1100 mm, depth 1400 mm, hardened cutting edge 150 × 20 mm 500 HB, inlying middle reinforcement, 2 inlying middle reinforcements for widths of 2200 mm, loss of reinforcement: with hardenend cutting edge 200 × 20 mm and wear resistant sub-construction


1800 mm 1880 l 480 kg 1.980,00 €

2000 mm 2100 l 507 kg 2.090,00 €

2200 mm 2320 l 572 kg 2.300,00 €

2400 mm 2540 l 598 kg 2.400,00 €

2500 mm 2625 l 613 kg 2.500,00 €

2600 mm 2760 l 625 kg 2.690,00 €

2800 mm 2940 l 680 kg 2.950,00 €

3000 mm 3150 l 730 kg 3.250,00 €

extra charge for:

height side frame 250,00 €spill guard 175,00 €cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge 300 × 30 mm 500 HB, per m 160,00 €

cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €screwed polyurethan cutting edge, per m 230,00 €wear resistant sub-construction 395,00 €

WH

EEL-

AN

D T

ELES

CO

PIC

LO

AD

ER

30

0

48

Type VLS L RL/TL no. 341

Volume light bucket l loading goods up to 1600 kg/cbm


height 1500 mm, depth 1480 mm, hardened cutting edge 250 × 25 mm 500 HB, without inlying middle reinforcement, made of fine grained steel


2000 mm 2700 l 880 kg 4.190,00 €

2200 mm 3000 l 940 kg 4.290,00 €

2400 mm 3260 l 980 kg 4.400,00 €

2500 mm 3400 l 1000 kg 4.450,00 €

2600 mm 3550 l 1025 kg 4.590,00 €

2800 mm 3840 l 1070 kg 4.750,00 €

3000 mm 4130 l 1100 kg 4.990,00 €

extra charge for:

height side frame 330,00 €spill guard, ca. 1250 × 200 mm 295,00 €screwed knife 250 × 25 mm 500 HB, per m 225,00 €cutting edge 300 × 30 mm 500 HB, per m 160,00 €cutting edge with screwed knife 300 × 30 mm 500 HB, per m 360,00 €screwed polyurethan cutting edge, per m 255,00 €wear resistant sub-construction 425,00 €

Type VLS XL RL/TL no. 308

Volume light bucket Xl loading goods up to 900 kg/cbm


height 1300 mm, depth 1750 mm, hardened cutting edge 300 × 30 mm 500 HB, 2 inlying middle reinforcements


2500 mm 3470 l 980 kg 4.395,00 €

2800 mm 3900 l 1045 kg 4.695,00 €

3000 mm 4190 l 1090 kg 4.895,00 €

extra charge for:

height side frame 330,00 €spill guard 295,00 €screwed knife 300 × 30 mm 500 HB, per m 245,00 €wear resistant sub-construction 495,00 €

49

Type GVS RL/TL no. 336

big Volume light bucket loading goods up to 1600 kg/cbm


height 1660 mm, depth 1590 mm, hardened cutting edge 300 × 30 mm 500 HB, without inlying middle reinforcements, made of fine grained steel


2500 mm 4350 l 1350 kg 5.390,00 €

2800 mm 4870 l 1480 kg 5.890,00 €

3000 mm 5230 l 1590 kg 6.290,00 €

extra charge for:

height side frame 350,00 €screwed knife 300 × 30 mm 500 HB, per m 245,00 €wear resistant sub-construction 495,00 €

Type HKS RL/TL no. 345



height 1120 mm, depth 1320 mm, hardened cutting edge 200 × 20 mm 500 HB,2 hydraulic cylinders, made of fine grained steel


1800 mm 1440 l 780 kg 3.420,00 €

2000 mm 1600 l 800 kg 3.570,00 €

2200 mm 1760 l 820 kg 3.725,00 €

2400 mm 1920 l 875 kg 3.990,00 €

2600 mm 2080 l 950 kg 4.290,00 €

Extra charge for:

height side frame 350,00 €spill guard 195,00 €

WH

EEL-

AN

D T

ELES

CO

PIC

LO

AD

ER

30

0

50

Type KLS RL/TL no. 326

multipurpose bucket 4 in 1 loading goods up to 2500 kg/cbm




1600 mm 570 l 400 kg 2.985,00 €

1800 mm 640 l 450 kg 3.340,00 €

2000 mm 720 l 475 kg 3.620,00 €

2200 mm 795 l 500 kg 3.950,00 €

2500 mm 900 l 565 kg 4.320,00 €

extra charge for:

crane hook 3 t 220,00 €screwed gravel tine, each 59,00 € welded gravel tine, heavy construction, each 79,00 €protection tube 245,00 €pressure limiting valve (220 bar) 210,00 €Pressure holding valve (needed for special loaders) 250,00 €

Type ES RL/TL no. 305

dirt bucket conical, loading goods up to 1600 kg/cbm


height 720 mm, depth 980 mm, hardened cutting edge 150 × 20 mm 500 HB, inlying middle reinforcement, 2 inlying middle reinforcements for widths of 2200 mm


1600 mm 760 l 290 kg 1.150,00 €

1800 mm 860 l 310 kg 1.230,00 €

2000 mm 965 l 330 kg 1.290,00 €

2200 mm 1065 l 350 kg 1.490,00 €

2500 mm 1215 l 390 kg 1.710,00 €

2600 mm 1255 l 410 kg 1.770,00 €

2800 mm 1370 l 420 kg 1.870,00 €

3000 mm 1470 l 440 kg 2.030,00 €

extra charge for:

spill guard 175,00 €cutting edge 200 x 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 x 20 mm 500 HB, per m 320,00 €screwed gravel tine, each 59,00 €welded gravel tine, each 79,00 €wear resistant sub-construction 395,00 €protection tube 245,00 €

51

Type SGS RL/TL no. 309



height 850 mm, depth 800 mm, hardened cutting edge 150 × 20 mm 500 HB, spill guard, for widths of 2000 mm 1 inlying middle reinforcement


1600 mm 800 l 265 kg 1.640,00 €

1800 mm 910 l 410 kg 1.740,00 €

2000 mm 1010 l 450 kg 1.840,00 €

2200 mm 1120 l 480 kg 1.950,00 €

2400 mm 1220 l 515 kg 2.070,00 €

2600 mm 1320 l 555 kg 2.230,00 €

2800 mm 1430 l 575 kg 2.395,00 €

extra charge for:

crane hook 3 t 220,00 €inlying middle reinforcement, each 280,00 €cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €wear resistant sub-construction 395,00 €protection tube 245,00 €screwed gravel tine, each 59,00 € welded gravel tine, heavy construction, each 79,00 €

Type LS RL/TL no. 323

load bucket loading goods up to 2500 kg/cbm


height 1300 mm, depth 1300 mm, made of 8 mm fine grained steel,hardened cutting edge 300 × 30 mm 500 HB, 2 inlying middle reinforcements, wear resistant sub-construction 500 HB


2500 mm 2620 l 1040 kg 4.250,00 €

2800 mm 2950 l 1160 kg 4.650,00 €

3000 mm 3160 l 1250 kg 4.990,00 €

extra charge for:

cutting edge 300 × 30 mm 500 HB, per m 245,00 €welded gravel tine, each 85,00 €

WH

EEL-

AN

D T

ELES

CO

PIC

LO

AD

ER

30

0

52

Type DUS RL/TL no. 310

silage fork With Grapple for wheel- or telescopic loader

height 780 mm, opening width ca. 1500 mm, tine length 1000 mm, thick material main tube with welded cones, tines high value full material, twist-protected tines in the nipper knife,2 hydraulic cylinders


1800 mm 10 580 kg 2.825,00 €

2000 mm 11 610 kg 3.070,00 €

2300 mm 12 650 kg 3.250,00 €

2500 mm 13 690 kg 3.400,00 €

2800 mm 14 770 kg 3.710,00 €

3000 mm 15 820 kg 3.950,00 €

Type DUS SLZ RL/TL no. 310 a

silage fork With Grapple with heavy duty tines


height 780 mm, opening width ca. 1500 mm, tine length 1000 mm, thick material main tube with welded cones, heavy duty tines, twist-protected tines in the nipper knife, 2 hydraulic cylinders


1800 mm 10 600 kg 3.375,00 €

2000 mm 11 630 kg 3.645,00 €

2300 mm 12 670 kg 3.840,00 €

2500 mm 13 710 kg 4.045,00 €

2800 mm 14 790 kg 4.400,00 €

3000 mm 15 840 kg 4.775,00 €

extra charge for:


extra charge for:


53

Type ESG RL/TL no. 324

bulky Goods bucket conical


height 720 mm, depth 980 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 20 mm 500 HB, wear resistant sub-construction, inlying middle reinforcement, removable sideparts screwed, 2 inlying middle reinforcements for widths of 2200 mm, thick material main tube with reinforced graps, 2 hydraulic cylinders, adjustable pressure limiting valvel


1600 mm 1030 l 510 kg 3.780,00 €

1800 mm 1160 l 535 kg 3.890,00 €

2000 mm 1290 l 575 kg 4.070,00 €

2200 mm 1490 l 610 kg 4.280,00 €

2500 mm 1620 l 660 kg 4.400,00 €

extra charge for:

cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €one more supporting point at the grapple 350,00 €oil flow divider 90 l/min 320,00 €pressure holding valve (needed for special loaders) 250,00 €

Type RSG RL/TL no. 338

brusk Pile Grabfor wheel- or telescopic loader

height 780 mm, opening width ca. 1500 mm, tine length 1000 mm, thick material main tube with welded cones, heavy duty tines, wear resistant sub-construction, reinforced sickles on the grapple, 2 hydraulic cylinders


1800 mm 10 620 kg 3.050,00 €

2000 mm 11 650 kg 3.150,00 €

2300 mm 12 690 kg 3.290,00 €

2500 mm 13 730 kg 3.390,00 €

2800 mm 14 810 kg 3.580,00 €

3000 mm 15 860 kg 3.850,00 €

extra charge for:


WH

EEL-

AN

D T

ELES

CO

PIC

LO

AD

ER

30

0

54

Type SHN M RL/TL no. 311



height 720 mm, depth 980 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 20 mm 500 HB, inlying middle reinforcement,2 inlying middle reinforcements for widths of 2200 mm, thick material main tube with welded sickles, 2 hydraulic cylinders, 1 sickle all-side, 3 points at the grapple for widths of 2800 mm


1600 mm 1030 l 550 kg 2.970,00 €

1800 mm 1160 l 575 kg 3.040,00 €

2000 mm 1290 l 615 kg 3.190,00 €

2200 mm 1490 l 660 kg 3.420,00 €

2500 mm 1620 l 700 kg 3.690,00 €

2800 mm 1820 l 740 kg 4.090,00 €

3000 mm 1950 l 770 kg 4.350,00 €

extra charge for:

cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €one more supporting point at the grapple 350,00 €wear resistant sub-construction 395,00 €reinforced sickle, each 30,00 €

closed sideparts of the grapple 590,00 € pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €

Type RSS RL/TL no. 325

bucket With Grapple conical


height 720 mm, depth 980 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 20 mm 500 HB, inlying middle reinforcement, removable sideparts screwed, 2 inlying middle reinforcements for widths of 2200 mm, thick material main tube with twist protected tines, 2 hydraulic cylinders


1600 mm 1030 l 510 kg 3.490,00 €

1800 mm 1160 l 535 kg 3.580,00 €

2000 mm 1290 l 575 kg 3.770,00 €

2200 mm 1490 l 610 kg 3.950,00 €

2500 mm 1620 l 660 kg 4.090,00 €

extra charge for:

cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 €one more tine at the side, each 69,00 €one more supporting point at the grapple 350,00 €oil flow divider 90 l/min 320,00 €wear resistant sub-construction 395,00 €pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €

55



height 900 mm, depth 1200 mm, opening width ca. 1850 mm, hardened cutting edge 200 × 20 mm und wear resistant sub-construc-tion 500 HB, 2 inlying middle reinforcements, 3 points at the grapple, thick material main tube with welded sickles, 2 hydraulic cylinders, 1 sickle all-side, 4 points at the grapple for widths of 2800 mm

Type SHN RL/TL no. 322 width volume weight price

2000 mm 2150 l 1080 kg 5.450,00 €

2200 mm 2400 l 1120 kg 5.550,00 €

2500 mm 2750 l 1160 kg 5.890,00 €

2800 mm 3050 l 1255 kg 6.350,00 €

3000 mm 3300 l 1310 kg 6.950,00 €

extra charge for:

cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 € cutting edge 300 × 30 mm 500 HB, per m 160,00 €cutting edge with screwed knife 300 × 30 mm 500 HB, per m 360,00 € one more supporting point at the grapple 350,00 €reinforced sickles, each 30,00 €

closed sideparts of the grapple 720,00 €pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €

Type SHN L RL/TL no. 332



height 900 mm, depth 1030 mm, opening width ca. 1470 mm, hardened cutting edge 150 × 20 mm HB 500, inlying middle reinforcement, 2 inlying middle reinforcements for widths of 2200 mm, thick material main tube with welded sickles, 2 hydraulic cylinders, 1 sickle all-side


1600 mm 1370 l 650 kg 3.820,00 €

1800 mm 1540 l 675 kg 3.950,00 €

2000 mm 1700 l 715 kg 4.040,00 €

2200 mm 1880 l 760 kg 4.190,00 €

2500 mm 2130 l 800 kg 4.350,00 €

2600 mm 2210 l 825 kg 4.520,00 €

2800 mm 2390 l 840 kg 4.750,00 €

3000 mm 2560 l 970 kg 4.990,00 €

extra charge for:

cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 € cutting edge 300 × 30 mm 500 HB, per m 160,00 € cutting edge with screwed knife 300 × 30 mm 500 HB, per m 360,00 € one more supporting point at the grapple 350,00 €wear resistant sub-construction 395,00 €

closed sideparts of the grapple 720,00 €pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €

WH

EEL-

AN

D T

ELES

CO

PIC

LO

AD

ER

30

0

56

Type SBS L RL/TL no. 331



height 900 mm, depth 1030 mm, opening width 1470 mm, hardened cutting edge 150 × 20 mm 500 HB, inlying middle reinforcement,2 inlying middle reinforcements for widths of 2200 mm, thick material main tube with welded cones and twist-protected tines, 2 hydraulic cylinders, 1 sickle all-side


1600 mm 1370 l 650 kg 3.920,00 €

1800 mm 1540 l 675 kg 4.050,00 €

2000 mm 1700 l 715 kg 4.140,00 €

2200 mm 1880 l 760 kg 4.290,00 €

2500 mm 2130 l 800 kg 4.450,00 €

2600 mm 2210 l 825 kg 4.620,00 €

2800 mm 2390 l 840 kg 5.050,00 €

3000 mm 2560 l 970 kg 5.600,00 €

extra charge for:

cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 € cutting edge 300 × 30 mm 500 HB, per m 160,00 €cutting edge with screwed knife 300 × 30 mm 500 HB, per m 360,00 € one more supporting point at the grapple 350,00 €

wear resistant sub-construction 395,00 €closed sideparts of the grapple 720,00 €pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €



height 720 mm, depth 980 mm, opening width 1470 mm, hardened cutting edge 150 × 20 mm 500 HB, inlying middle reinforcement,2 inlying middle reinforcements for widths of 2200 mm, thick material main tube with welded cones and twist-protected tines, 2 hydraulic cylinders, 1 sickle all-side

Type SBS M RL/TL no. 312


1600 mm 1030 l 550 kg 3.020,00 €

1800 mm 1160 l 575 kg 3.120,00 €

2000 mm 1290 l 615 kg 3.350,00 €

2200 mm 1490 l 660 kg 3.550,00 €

2500 mm 1620 l 700 kg 3.790,00 €

2800 mm 1820 l 740 kg 4.320,00 €

3000 mm 1950 l 770 kg 4.650,00 €

extra charge for:

cutting edge 200 × 20 mm 500 HB, per m 145,00 €cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 € one more supporting point at the grapple 350,00 €wear resistant sub-construction 395,00 €

closed sideparts of the grapple 590,00 € pressure limiting valve (220 bar) 210,00 €pressure holding valve (needed for special loaders) 250,00 €

57

Type SBS XL RL/TL no. 343

silage bucket Xl for wheel- or telescopic loader

height 1080 mm, depth 1290 mm, opening width ca. 2040 mm, made of fine grained steel, hardened cutting edge 250 × 25 mm and wear resistant sub-construction 500 HB, 2 inlying middle reinforcements, 2 points at the grapple, 3 points at the grapple for widths of 2800 mm, thick material main tube with welded cones and twist-protected heavy duty tines, 2 hydraulic cylinders, 2 sickles all-side


2200 mm 3120 l 1450 kg 7.090,00 €

2500 mm 3550 l 1640 kg 7.990,00 €

2600 mm 3690 l 1700 kg 8.250,00 €

2800 mm 3950 l 1810 kg 8.560,00 €

3000 mm 4240 l 1920 kg 8.850,00 €

extra charge for:

screwed knife 250 × 25 mm 500 HB, per m 195,00 € cutting edge 300 × 30 mm 500 HB, per m 160,00 €cutting edge with screwed knife 300 × 30 mm 500 HB, per m 360,00 € one more supporting point at the grapple 450,00 €closed sideparts of the grapple 790,00 €


Type SBS RL/TL no. 313



height 900 mm, depth 1200 mm, opening width ca. 1850 mm, hardened cutting edge 200 × 20 mm and wear resistant sub-construction 500 HB,2 inlying middle reinforcements, 3 points at the grapple, 4 points at the grapple for widths of 2800 mm, thick material main tube with welded cones and twist-protected heavy duty tines, 2 hydraulic cylinders, 1 sickle all-side


2000 mm 2150 l 1040 kg 5.750,00 €

2200 mm 2400 l 1095 kg 5.900,00 €

2500 mm 2750 l 1130 kg 6.200,00 €

2800 mm 3050 l 1225 kg 6.690,00 €

3000 mm 3300 l 1265 kg 7.250,00 €

extra charge for:

cutting edge with screwed knife 200 × 20 mm 500 HB, per m 320,00 € cutting edge 300 × 30 mm 500 HB, per m 160,00 €cutting edge with screwed knife 300 × 30 mm 500 HB, per m 360,00 € one more supporting point at the grapple 350,00 €closed sideparts of the grapple 720,00 €


WH

EEL-

AN

D T

ELES

CO

PIC

LO

AD

ER

30

0

58


1400 mm 730 l 490 kg 3.950,00 €

1600 mm 840 l 530 kg 4.250,00 €

1800 mm 940 l 580 kg 4.650,00 €

2000 mm 1040 l 620 kg 5.050,00 €

2200 mm 1155 l 680 kg 5.450,00 €

2300 mm 1210 l 710 kg 5.650,00 €

2500 mm 1310 l 775 kg 5.950,00 €

2600 mm 1365 l 800 kg 6.150,00 €

2800 mm 1470 l 865 kg 6.350,00 €

extra charge for:

cutting edge 200×20mm 500 HB, per m 120,00 €cutting edge with screwed knife 200×20mm 500 HB, per m 220,00 €one more supporting point at the grapple 295,00 €


1600 mm 1070 l 700 kg 5.300,00 €

1800 mm 1240 l 725 kg 5.750,00 €

2000 mm 1400 l 765 kg 6.150,00 €

2200 mm 1580 l 810 kg 6.550,00 €

2300 mm 1670 l 830 kg 6.750,00 €

2500 mm 1830 l 850 kg 6.990,00 €

2600 mm 1960 l 875 kg 7.250,00 €

2800 mm 2090 l 890 kg 7.450,00 €

extra charge for:

cutting edge with screwed knife 200×20mm 500 HB, per m 220,00 €pressure limiting valve (220 bar) 150,00 €pressure holding valve (needed for special loaders) 180,00 €

Type Sp SB M RL/TL no. 352

SMART PUSH silage bucket m for wheel- or telescopic loader loading goods up to 900 kg/cbm

height 700 mm, depth 940 mm, 4 supporting points at the grapple for widths of 2800 mm, variable mechanical back board, overload safety device, heavy upper looper with sickles (HB 500), open back board, made of fine grained steel, polyamid wear plate profil, hardened cutting edge 150 × 16 mm 500 HB

Type Sp SB L RL/TL no. 353

SMART PUSH silage bucket l for wheel- or telescopic loader loading goods up to 900 kg/cbm

height 900 mm, depth 1030 mm, 4 supporting points at the grapple for widths of 2800 mm, variable mechanical back board, overload safety device, heavy upper looper with sickles (HB 500), open back board, made of fine grained steel, polyamid wear plate profil,hardened cutting edge 200 × 20 mm 500 HB,

wear resistant sub-construction 340,00 €reinforced sickle, each 20,00 €pressure limiting valve (220 bar) 150,00 €pressure holding valve (needed for special loaders) 180,00 €

one more supporting point at the grapple 295,00 €wear resistant sub-construction 340,00 €reinforced sickle, each 20,00 €

59

Type WVK RL/TL no. 315

tool carrierfor wheel- or telescopic loader

load capacity max. 4000 kg, tool carrier for loading/transport of attachments with cat-adapteradjustable Cat 2–3


1200 mm 750 mm 370 kg 1.390,00 €

Type CH RL/TL no. 337

container Hookfor wheel- or telescopic loader

handle containers for bulk tippers, length 600 mm

> Attention for the load diagram of the loader!


5000 kg 180 kg 1.450,00 €

Extra charge for:

wire and hook 170,00 €

Type ASLH RL/TL no. 317

crane Hook for wheel- or telescopic loader

forged swivel hookPlease indicate diameter of pallet fork tines.


3200 kg 75 kg 790,00 €

5000 kg 95 kg 990,00 €

Extra charge for:

forged swivel hook 5,0 t 280,00 €

WH

EEL-

AN

D T

ELES

CO

PIC

LO

AD

ER

30

0

60

Type LH RL/TL no. 318




3200 kg 500 mm 190 kg 1.390,00 €

3200 kg 1000 mm 210 kg 1.730,00 €

3200 kg 1500 mm 240 kg 1.900,00 €

3200 kg 2000 mm 260 kg 2.100,00 €

5000 kg 500 mm 210 kg 1.620,00 €

5000 kg 1000 mm 230 kg 1.930,00 €

5000 kg 1500 mm 260 kg 2.170,00 €

5000 kg 2000 mm 280 kg 2.370,00 €

Type LH S RL/TL no. 319 Frachtkostenanteil innerhalb Deutschlands 160,00 €




12000 kg 500 mm 495 kg 3.100,00 €

Type BBT RL/TL no. 320

bIG-baG carrierfor wheel- or telescopic loader

mechanicly adjustable in 3 heights 1200 – 1800 mm, crane hook in three-steps adjustable


1000 kg 1000 mm 185 kg 1.390,00 €

1500 kg 1000 mm 195 kg 1.560,00 €

61

Type AK RL/TL no. 321

Working Platform for wheel- or telescopic loader

size ca. 1154 × 1224 mm, lifting force 300 kg, interlocking divice for fork tines, selflocking door 600 × 900 mm, non-slip base, fold-away safety guard


300 kg 190 kg 1.550,00 €

Type AK II RL/TL no. 327

Working Platformfor wheel- or telescopic loader

size ca. 1100 × 2000 mm, lifting force 300 kginterlocking divice for fork tines, selflocking door 600 × 900 mmnon-slip base, fold-away safety guard


300 kg 280 kg 2.950,00 €

extra charge for:

wooden edge guard 240,00 €hot-dip galvanised 550,00 €height up 1000 mm 750,00 €

extra charge for:

wooden edge guard 350,00 €hot-dip galvanised 750,00 €

WH

EEL-

AN

D T

ELES

CO

PIC

LO

AD

ER

30

0

62

Type GETR RL/TL no. 347

Grain Pusherfor wheel- or telescopic loader

height 1000 mm, length ca. 400 mm, torsion free corpus, hardened cutting edge 110 × 12 mm, wear resistant sub-construction, guide plate sidewards, extension possible (small picture)

width weight price

2300 mm 265 kg 1.650,00 €

2500 mm 290 kg 1.850,00 €

3000 mm 370 kg 2.250,00 €

extra charge for:

side plates extension to 400 mm 290,00 €grid frame extension per 500 mm 350,00 €screwed polyurethan cutting edge, per m 170,00 €

Type SLK RL/TL no. 346

silage comb for wheel- or telescopic loader

length 1500 mm, extension possible (small picture)stable grid frame with tool holder,main tube with welded cones,bowed heavy duty tines length 800 mm,twist-protected tines, kinked comb 20°

width weight price

2300 mm 320 kg 2.150,00 €

2500 mm 350 kg 2.390,00 €

3000 mm 395 kg 2.650,00 €

extra charge for:

welded sickles sickles instead of bowed heavy duty tines 180,00 €grid frame extension per 500 mm 350,00 €

63

Type SSD RL/TL no. 329Frachtkostenanteil innerhalb Deutschlands 180,00 €

snow bladefor wheel- or telescopic loader

height 880 mm, vulkollan lip, torsion resistant corpus, hydraulic slewing 30°, level compensation, height adjustable brand named wheels


2000 mm 1800 mm 320 kg 2.950,00 €

2200 mm 1920 mm 330 kg 3.090,00 €

2600 mm 2280 mm 340 kg 3.290,00 €

2900 mm 2550 mm 360 kg 3.420,00 €

extra charge for:

kAT 2 150,00 €with lamps 180,00 €polyurethane blade, per m 250,00 €wear resistant blade 500 HB, per m 150,00 €

Type SSD V RL/TL no. 344

snow bladefor wheel- or telescopic loader

height 830–970 mm, vulkollan lip, torsion resistant corpus, hydraulic slewing 30°, level compensation, height adjustable brand named wheels


2000 mm 1750 mm 350 kg 3.550,00 €

2200 mm 1950 mm 370 kg 3.690,00 €

2600 mm 2280 mm 400 kg 3.880,00 €

2900 mm 2550 mm 430 kg 4.275,00 €

extra charge for:

kAT 2 150,00 €with lamps 180,00 €polyurethane blade, per m 250,00 €wear resistant blade 500 HB, per m 150,00 €

WH

EEL-

AN

D T

ELES

CO

PIC

LO

AD

ER

30

0

64

Type KB RL/TL no. 330

sweeperfor wheel- or telescopic loader

mechanical side adjustment, splash guard, hydraulic motor, brush ø 600 mm, height adjustable brandnamed wheels

width weight price

1800 mm 460 kg 4.870,00 €

2000 mm 480 kg 5.250,00 €

2300 mm 495 kg 5.450,00 €

2600 mm 520 kg 6.180,00 €

Type KB S RL/TL no. 342

sweeperfor wheel- or telescopic loader



2400 mm 1700 mm 240 kg 2.200,00 €

2800 mm 2000 mm 280 kg 2.430,00 €

3200 mm 2280 mm 360 kg 2.740,00 €

Extra charge for:

hydraulic side adjustment 790,00 €hopper, hydraulic emptying 1.790,00 €water spray system 1.520,00 €side brush 1.290,00 €side lamps 390,00 €


tool holder for pallet forks, indicate diameter of pallet fork tines - 200,00 €

Extra charge for:


65

latch trestles

Type RS KLK no. 802 version price

short construction (Baas, Frost) 45,00 €

Quick coupler

Type SWR EA no. 801 version price

EURO-norm, mechanical central-locking system 310,00 €

ACCESSORIES 800

66

adapter frame for courtloader

EURO-quick-coupling system

Type ADR HL-EA no. 804

adapter frame for wheel- or telescopic loader

EURO-quick-coupling system

Type ADR RL/TL-EA no. 805

adapter framefor three-point-linkage cat 2–3

3 point linkage for front-and tail hydraulics

Type ADR EA-KAT no. 811

version price

mechanical middle central-locking system 790,00 €

version price

mechanical middle central-locking system 990,00 €

version price

three-point-linkage cat 2–3 790,00 €

latch trestles

Type RS KLL no. 803 version price

long construction (Stoll) 49,00 €

67

fork tine DIN 500 load capacity 1500 kg (pair)

Type GZ DIN 80 × 40 mm no. 806

length weight price

900 mm 41 kg 180,00 €

1000 mm 44 kg 190,00 €

1100 mm 46 kg 200,00 €

1200 mm 49 kg 210,00 €

1300 mm 52 kg 220,00 €

fork tine ISO FEM II load capacity 2500 kg (pair)

length weight price

900 mm 36 kg 220,00 €

1000 mm 40 kg 230,00 €

1100 mm 45 kg 240,00 €

1200 mm 48 kg 250,00 €

1300 mm 55 kg 270,00 €

fork tine ISO FEM III load capacity 3500 kg (pair)

length weight price

900 mm 69 kg 280,00 €

1000 mm 73 kg 290,00 €

1100 mm 77 kg 310,00 €

1200 mm 82 kg 325,00 €

1300 mm 85 kg 360,00 €


length weight price

1000 mm 80 kg 330,00 €

1100 mm 87 kg 340,00 €

1200 mm 95 kg 370,00 €

1300 mm 105 kg 390,00 €

1500 mm 115 kg 490,00 €

Type GZ FEM II 100 × 40 mm

Type GZ FEM III 100 × 50 mm


68


length weight price

1000 mm 90 kg 380,00 €

1100 mm 97 kg 390,00 €

1200 mm 105 kg 420,00 €

1500 mm 115 kg 540,00 €

fork tine ISO FEM IV load capacity 6000 kg (pair)

length weight price

1200 mm 115 kg 720,00 €

1300 mm 125 kg 800,00 €

1500 mm 135 kg 870,00 €

Pallet fork extensions load capacity 2000 kg (pair)

please indicate diameter of pallet fork tines, special length are available on request

Type ZV no. 809

length weight price

1800 mm 35 kg 280,00 €

2000 mm 38 kg 300,00 €

carrier for fork

compl. height 1100 mm, for pallet fork carrier DIN oder FEM norm,please indicate norm of pallet fork carrier

Type GTS Z no. 807

tine length load capacity/each price

1100 mm 600 kg 195,00 €

1400 mm 600 kg 210,00 €

800 mm (heavy duty tine) 1000 kg 205,00 €




Type GZ FEM IV 130 × 60 mm

69

bIG-baG carrieraufschiebbar auf Pallet Fork with DIN oder FEM Norm for pallet fork carrier DIN oder FEM norm, mechanicly adjustable in 3 heights 1200–1800mm, crane hook adjustable in three-stepsPlease indicate norm of pallet fork carrier.

Type BBT Z no. 808 working radius load capacity weight price

1000 mm 1000 kg 85 kg 450,00 €

Hydraulic Grapple for Pallet fork for pallet fork carrier DIN or FEM norm

radius 500mm, lowest diameter are 200mm, hydraulik grapple with double-acting cylinderPlease indicate norm of pallet fork carrier.

Type HOZ pLG no. 813 weight price

85 kg 890,00 €

Protection tube for road

ubiquitous application for bale fork, manure fork and pallet fork, clench over the tines with signal colour

Type ZS no. 810

width price

1000 mm 140,00 €

1200 mm 150,00 €

1400 mm 155,00 €

1600 mm 165,00 €

1800 mm 175,00 €

2000 mm 185,00 €

2300 mm 210,00 €

2500 mm 260,00 €

70

Type ASK EA no. 903

anschweißkonsolen

euro-norm forged eye

Type ESÖ no. 901 version price

ø 28 mm 15,00 €

Type ESK no. 902

euro-norm forged Hook

version price

for bolt ø 40 mm 21,00 €

version price per Satz

edged for EURO-norm, set (left and right) 89,00 €

REPLACEMENTS AND WEAR PARTS 900

71

main tube for standard tines

with welded cones

Type ZTR no. 904

length number of cones price

810 mm 5 125,00 €

980 mm 6 140,00 €

1200 mm 7 160,00 €

1400 mm 8 180,00 €

1600 mm 9 200,00 €

1800 mm 10 220,00 €

2000 mm 11 235,00 €

2300 mm 12 255,00 €

main tube for heavy duty tines

with welded cones

Type ZTR S no. 904 a

length number of cones price

810 mm 5 190,00 €

980 mm 6 220,00 €

1200 mm 7 250,00 €

1400 mm 8 270,00 €

1600 mm 9 315,00 €

1800 mm 10 345,00 €

2000 mm 11 380,00 €

2300 mm 12 410,00 €

fork tine standard, bowed

no. 906

length price

600 mm 45,00 €

680 mm 46,00 €

800 mm 49,00 €

Heavy duty tine bowed

length price

800 mm 62,00 €

1000 mm 75,00 € no. 906 a

Type ESÖ no. 901

Type ESK no. 902

72

fork tine standard, ø 36 mm

no. 907

length price

400 mm 20,50 €

800 mm 40,00 €

1000 mm 49,00 €

1100 mm 53,00 €

no. 908

Heavy duty tine ø 44 mm

length price

800 mm 59,00 €

1000 mm 65,00 €

1100 mm 72,00 €

1250 mm 76,00 €

1400 mm 95,00 €

1400 mm special heavy duty tine 105,00 €

Wear slat 500 HB

no. 909

width size price per m

80 mm 10 mm 46,00 €

100 mm 10 mm 55,00 €

100 mm 15 mm 61,00 €

120 mm 20 mm 79,00 €

cutting edge one-sided beveled, 500 HB

no. 910

width size price per m

110 mm 12 mm 62,00 €

150 mm 16 mm 87,00 €

150 mm 20 mm 107,00 €

200 mm 20 mm 140,00 €

250 mm 25 mm 205,00 €

300 mm 30 mm 250,00 €

73

screw set, screws and special nuts 10.9

no. 912

thread length price p. set

M 16 25 mm 19,00 €

35 mm 21,50 €

55 mm 24,00 €

M 20 55 mm 37,00 €

special spanner type Hesse

no. 913

no. 914

discription price

adapter for special nuts 39,00 €

hydraulic cylinder base pin price

FS 30 N / TS 30 N ø 30 mm 35,00 €

FS 40 N / TS 40 N ø 40 mm 49,00 €

FS 50 N / TS 50 N ø 50 mm 75,00 €

rod ends

for welding to plungerends or hydraulic cylinder base

plungerends pin price

FS 30 C / TS 30 C ø 30 mm 29,00 €

FS 40 C / TS 40 C ø 40 mm 41,00 €

FS 50 C / TS 50 C ø 50 mm 58,00 €

screw knife two-sided beveled, 500 HB

no. 911

width size price

200 mm 20 mm 250,00 €

250 mm 25 mm 280,00 €

300 mm 30 mm 300,00 €

74

Hydraulic Hoses (2 sn) incl. o-ring

no. 915

version length price

NW 10 DkOL/DkOL 700 mm 36,00 €

800 mm 39,00 €

1000 mm 42,00 €

1200 mm 48,00 €

NW 12 DkOL/DkOL 300 mm 26,00 €

500 mm 34,00 €

1000 mm 45,00 €

1200 mm 54,00 €

1830 mm 64,00 €

2650 mm 76,00 €

2850 mm 79,00 €

3050 mm 85,00 €

NW 12 DkOL/DkOL 90° 600 mm 38,00 €

800 mm 43,00 €

1050 mm 48,00 €

1250 mm 59,00 €

1950 mm 68,00 €

2050 mm 75,00 €

no. 916

Hydraulic couplers

SVk-plug-in coupling plug BG II M 18 x 1,5 24,00 €SVk-bushing-in coupling plug BG II M 18 x 1,5 25,50 €

SVk-plug-in coupling plug BG III M 22 x 1,5 25,50 €SVk-bushing-in coupling plug BG III M 22 x 1,5 27,50 €

Flat-Face gasket plug BG II M 18 x 1,5 38,00 €Flat-Face gasket bushing BG II M 18 x 1,5 51,00 €

Flat-Face gasket plug BG III M 22 x 1,5 42,00 €Flat-Face gasket bushing BG III M 22 x 1,5 71,00 €

threaded coupling Sk plug BG III M 18 x 1,5 33,00 €threaded coupling Sk plug BG III M 22 x 1,5 33,00 €

oil flow divider

no. 917

price




pressure holding valve 235,00 €

pressure holding valve adjustable 260,00 €

75

no. 919

bolts

hardened bolts in different sizesPlease indicate type and number of the loader.

cones

no. 920

version length tine price

bolted 82 mm ø 36 mm standard tine 20,00 €

swiveled 110 mm ø 36 mm standard tine 30,00 €

swiveled 110 mm ø 36 mm twist-protected 33,50 €

swiveled 120 mm ø 44 mm for heavy duty tine 32,00 €

swiveled 120 mm ø 44 mm twist-protected 38,00 €

swiveled 140 mm ø 55 special heavy duty tine 38,00 €

Inner tension bushes

hardened PN 7000

version bolt outside price

ESB 30 ø 30 mm 35 x 20 mm 22,00 €

ESB 40 ø 40 mm 50 x 40 mm 26,00 €

ESB 50 ø 50 mm 60 x 50 mm 31,00 € no. 921

Hydraulic cylinder

no. 918

cylinder housing plunger stroke length price

40 mm 20 mm 500 mm 145,00 €

50 mm 30 mm 150 mm 195,00 €

50 mm 30 mm 180 mm 215,00 €

60 mm 35 mm 500 mm 245,00 €

80 mm 50 mm 200 mm 245,00 €

80 mm 50 mm 250 mm 270,00 €

80 mm 50 mm 350 mm 290,00 €

100 mm 60 mm 300 mm 325,00 €

120 mm 70 mm 350 mm 380,00 €

variant price

indicate type and number of the loader on request

76

Gravel tine

engineering drawing forindication of measurements

Type E3, screwed Maße: L = 184 mm, A = 50 mm, E = 84 mm, T = 40 mm, I = 40 mm, S = 15 mm

Type E5, screwed Maße: L = 212 mm, A = 57 mm, E = 96 mm, T = 42 mm, I = 42 mm, S = 20 mm

no. 922

convert-set

welded on bracketsfor backfitting of different loaders

no. 923

carrier beams

version for pallet fork price

upper part DIN tine length 1000 mm 88,00 €

lower part " 74,00 €

upper part ISO FEM II tine length 1000 mm 188,00 €


upper part ISO FEM II tine length 1200 mm 229,00 €


upper part ISO FEM III tine length 1000 mm 225,00 €


upper part ISO FEM III tine length 1200 mm 245,00 €


no. 924

version price

Type E3, screwed 38,00 €

Type E5, screwed 45,00 €

version price


77

locking for Pallet fork tine

set composed of lower and upper parts with locking

version price per satz

locking for DIN Fork Tine 79,00 €

locking for ISO FEM II Fork Tine 95,00 €

locking for ISO FEM III Fork Tine 108,00 €

locking for ISO FEM IV Fork Tine 148,00 € no. 925

Hydraulic tube zinc-plated

version price per m

hydraulic tube ø 12 mm 32,00 €

hydraulic tube ø 15 mm 36,00 € no. 926

version price


Welded bushings

different constructionsPlease indicate type and number of the loader.

no. 927

controlled and evenly dosed sliding out of various loads

elevation of the overload height

reduced weight compared with high dump buckets

unloading at feed racks possible

low initial costs

no shift of load centre whilst unloading

complete emptying due to push-off wall

mechanical activation, no second hydraulic circuit required

that's how professionals do their work.

Hesse metalltechnik GmbHTeichstraße 23D - 59505 Bad Sassendorf

+ 49 (0) 2921-350 9990

[email protected]

that's how professionals do their work. · court- and skid-skeer loader attachments page...

Documents