technical data sheet - polimerlux · specific gravity. din 53476. g/cm³. 1,36. weight-g/m². 1361....
TRANSCRIPT
Customer : POLIMERLUX SLL / SPAIN DATE: 07/06/2013
Profile Code 932 FIBROSER STD FX
Thickness: 0,90 mm
Top Surface Covered with High Uv protection film ( Melinex 389)
PRODUCT CHARACTERISTIC TEST STANDART UNIT VALUE
COLOR DE OPAL WHITE OPAL WHITE
NOMINAL THICKNESS - mm 0,90
GLASS CONTENT TS 1177 / ISO 1172 % 24,88
BARCOL HARDNESS TS EN 59 ° Barcol 35
TENSILE STRENGTH ISO 527 - 4 N/mm² 59
TENSILE MODULUS ISO 527 - 4 N/mm² 4028
ELONGATION AT BREAK ISO 527 - 4 % 2,05
FLEXURAL STRENGTH ISO 14125 N/mm² 190
FLEXURAL MODULUS ISO 14125 N/mm² 7051
FLEXURAL STRAIN ISO 14125 % 5,06
SPECIFIC GRAVITY DIN 53476 g/cm³ 1,36
WEIGHT - g/m² 1361
The indicated values are measurements done on samples.Consequently, they don't represent any specification.
R&D Department Chief EngineerFibrosan GRP Inc. Kemalpasa Cad. No.14, 35060 Pinarbasi, Izmir, TurkeyTel : +90 232 479 16 73Fax :+90 232 479 12 47
TECHNICAL DATA SHEET
Customer : POLIMERLUX SLL / SPAIN DATE: 04.03.2014
Profile Code 930 FIBROSER STD FX
Thickness:
Top Surface Covered with High Uv protection film ( Melinex 389)
PRODUCT CHARACTERISTIC TEST STANDART UNIT MEASURED
COLOR DE NATUREL NATUREL
NOMINAL THICKNESS - mm
GLASS CONTENT TS 1177 / ISO 1172 % 24,85
BARCOL HARDNESS TS EN 59 ° Barcol 35-40
TENSILE STRENGTH ISO 527 - 4 N/mm² 57
TENSILE MODULUS ISO 527 - 4 N/mm² 4696
ELONGATION AT BREAK ISO 527 - 4 % 1,46
FLEXURAL STRENGTH ISO 14125 N/mm² 263
FLEXURAL MODULUS ISO 14125 N/mm² 9520
FLEXURAL STRAIN ISO 14125 % 4,98
SPECIFIC GRAVITY DIN 53476 g/cm³ 1,56
WEIGHT - g/m² 1520
The indicated values are measurements done on samples.
Consequently, they don't represent any specification.
R&D Department
Chief Engineer
Fibrosan GRP Inc.
Kemalpasa Cad. No.14,
35060 Pinarbasi,
Izmir, Turkey
Tel : +90 232 479 16 73
Fax :+90 232 479 12 47
TECHNICAL DATA SHEET
1.00MM
1.00
1110 mm
CLIENTE : POLIMERLUX SLL / SPAIN DATE: 06/08/2013
CODIG O PERFIL 206 FIBROSER STD FX
ESPESOR: 1 . 00 MM
Top superficie cub ierta con pelicula de protección de rayos UV (melinex 389)
CARACTERISTICAS PRODUCTO TEST STANDART UNIDAD MEDIDA
COLOR DE NATURAL NATURAL
ESPESOR NOMINAL - mm 1,00
CONTENIDO FIBRA TS 1177 / ISO 1172 % 25,05
DUREZ A BARAD TS EN 59 ° Barcol <15
RESIST. TENSION ISO 527 - 4 N/mm² 68
MODULO DE TRACCION ISO 527 - 4 N/mm² 3583
ALARGAM. DE ROTURA ISO 527 - 4 % 3,26
RESISTENCIA DE FLEXION ISO 14125 N/mm² 170
MODULO DE FLEXION ISO 14125 N/mm² 6425
DEFORM. DE FLEXION ISO 14125 % 4,85
GRAVEDAD ESPECIFICA DIN 53476 g/cm³ 1,47
PESO - g/m² 1328
los valores indicados son mediciones realizadas en las muestras.
por lo tanto, no representan una especificacion.
R&D Department
Chief Engineer
Fibrosan GRP Inc.
Kemalpasa Cad. No.14,
35060 Pinarbasi,
Izmir, Turkey
Tel : +90 232 479 16 73
Fax :+90 232 479 12 47
FICHA TECNICA
PRODUCT : 314 FIBROSER STD FX ( 76/18)
PRODUCT CHARACTERISTIC TEST STANDART UNIT VALUE
COLOR DE NATUREL NATUREL
NOMINAL THICKNESS - mm 0,90
GLASS CONTENT TS 1177 / ISO 1172 % 25,01
BARCOL HARDNESS TS EN 59 ° Barcol 45-50
TENSILE STRENGTH ISO 527 - 4 N/mm² 76
TENSILE MODULUS ISO 527 - 4 N/mm² 4998
ELONGATION AT BREAK ISO 527 - 4 % 2,15
FLEXURAL STRENGTH ISO 14125 N/mm² 205
FLEXURAL MODULUS ISO 14125 N/mm² 7895
FLEXURAL STRAIN ISO 14125 % 4,28
SPECIFIC GRAVITY DIN 53476 g/cm³ 1,51
WEIGHT - g/m² 1315
The indicated values are measurements done on samples.
Consequently, they don't represent any specification.
TECHNICAL DATA SHEET
Customer : POLIMERLUX SLL / SPAIN DATE: 20.04.2016
Profile Code 609 FIBROSER STD FX
Thickness: 0,90 mm
Top Surface Covered with High Uv protection film ( Melinex 389)
Width 800mm upto 1500mm
Length 20meter upto 300meter
PRODUCT CHARACTERISTIC TEST STANDART UNIT MEASURED
COLOR DE NATUREL NATUREL
NOMINAL THICKNESS - mm 0,90
GLASS CONTENT TS 1177 / ISO 1172 % 24,85
BARCOL HARDNESS TS EN 59 ° Barcol 35-40
TENSILE STRENGTH ISO 527 - 4 N/mm² 57
TENSILE MODULUS ISO 527 - 4 N/mm² 4696
ELONGATION AT BREAK ISO 527 - 4 % 1,46
FLEXURAL STRENGTH ISO 14125 N/mm² 263
FLEXURAL MODULUS ISO 14125 N/mm² 9520
FLEXURAL STRAIN ISO 14125 % 4,98
SPECIFIC GRAVITY DIN 53476 g/cm³ 1,56
WEIGHT - g/m² 1200
The indicated values are measurements done on samples.
Consequently, they don't represent any specification.
R&D Department
Chief Engineer
Fibrosan GRP Inc.
Kemalpasa Cad. No.14,
35060 Pinarbasi,
Izmir, Turkey
Tel : +90 232 479 16 73
Fax :+90 232 479 12 47
TECHNICAL DATA SHEET