technical data sheet - erpnext ls spec.pdf · exxon lighting corporation tel: +1-941-404-6437 fax:...
TRANSCRIPT
TECHNICAL DATA SHEET
Exxon Lighting Corporation
Tel: +1-941-404-6437 Fax: 1-866-619-0925 www.exxonlighting.com E-mail: [email protected]
Replacement Lamps for Outdoor Pole/Arm-mounted Area and Roadway Luminaires (Type B).
NAME: LED Street Light
P/N: STL-71152-95
● UL, cUL, DLC● PHILIPS LUMILEDS chip, high CRI.● 90 x 150 degree, TYPE Ⅲ.● Internal driver, input voltage 100-277V AC.● E39 lamp base.● Lamp Base: 270 degree rotated.● Single SUNON fan.● New style and high efficient wide-range input.● Long lifespan and good heat dissipation.● Direct replacement for Metal Halide, easy Installation.● Fits many different fixtures to replace traditional lamps.
Advantages
Applications
Color temperature
CRI
Lumen-In Luminaires
Lumen Efficacy-In Luminaires
Input Power
Viewing Angle
Input Voltage
PFC
Equivalent
Waterproof Rating
LED Brand
LED Type
LED QTY
Housing
Housing color
LUXEON 3030 2D(1.5W)
196 PCS
Magnesium Alloy+AL+PC
Black+Silver
TECHNICAL DATA SHEET
PRODUCT SPECIFICATIONS
MATERIALS
PHILIPS LUMILEDS
>0.9
IP51
Exxon Lighting Corporation
Tel: +1-941-404-6437 Fax: 1-866-619-0925 www.exxonlighting.com E-mail: [email protected]
STL-71152-95
Product name
Part No
Lamp Base
Dimension
E39
Technical Characteristics5000K
>70
14380 lm
130 lm/W
115W
90 x 150 degree (TypeⅢ)
100-277V AC 50/60Hz
200W CFL, 400W MHL/HPS/HID
Operating Temperature -4°F to +113°F (-20°C to +45°C)
Operating Humidity 20%-70% RH
Storage Temperature -22°F to +176°F (-30°C to +80°C)
Storage Humidity 10%-75% RH
Application Replacement Lamps for Outdoor Pole/Arm-mounted and Roadway Luminaires
Safety Certification UL, cUL, DLC
Warranty Time 5 Years
OTHER
11.7" x 6.5" x 3.4" (297mm x 138mm x 87mm)
LED Street Light
TECHNICAL DATA SHEET
Remark: The testing data comes from the product in luminaires.
Exxon Lighting Corporation
Tel: +1-941-404-6437 Fax: 1-866-619-0925 www.exxonlighting.com E-mail: [email protected]
SizeQty/
CartonNet Weight/
CartonGross Weight/
TECHNICAL DATA SHEETPackage
Notice For User
L
N
Ballast
Capacitor
Ignitor HPS
L
N
Ballast
Capacitor
IgnitorLEDlamp
Replace MHL / HPS
L
N
CFL
Replace CFL
L
N
LEDlamp
MHL
LED Retrofit Kit Into PE bag Into EPE
Joint sealing Into outer box Cover inner box Into inner box
Problem Check points
Turn off the power and turn on again in 3 minutes. IfFlickering of the lamp
same phenomena occurs call a technician
Carton
Inner box 13.4"x 6.3"x 4.3" 1 2.86 lbs 3.4 lbs
Troubleshooting
● Turn off power before installing or changing assembly parts.● The input voltage and lamps should be matched, after connecting the power line, make sure the wiring section is insulated.● Make sure to remove or bypass the ballast in the fixtures before installing the lamps.● Suitable for damp locations. Do not use with dimmers.● Suitable for use in enclosed luminaires, min. lamp compartment dimensions: 17.3" x 10.2" x 10.2".● Non-professionals must not install or disassemble the lamps.
Outer box 26" x 14" x 9.4" 8 23.24 lbs 29.5 lbs
Exxon Lighting Corporation
Tel: +1-941-404-6437 Fax: 1-866-619-0925 www.exxonlighting.com E-mail: [email protected]
Not working Check the connections