sx50 user manual · 2020. 12. 10. · media, the volume buttons on the side of phone will adjust...

+44 (0)1279 295 800 | www.weareconker.com

SX50 USER MANUAL


OS Android 7.0 Audio Waterproof, built-in microphone and speaker

CPU MT6753 ARM-Cortex Octa-core CPU @ 1.3GHz + Mali-720 GPU

Display 5 IPS

Resolution 1280 x 720

IP Rating IP67 / MIL-STD-810G Touch 5-point capacitive multi-touch,

Dragontrail toughened glass

Drop Test 1.2m

Dimensions/ Weight

160 x 76 x 11-21mm/ 250g

Battery 4000mAh Camera

WirelessConnectivity

Wi-Fi: Dual band Wi-Fi, 2.4/5 GHz

Bluetooth: 4.0 / 2402 - 2480 MHz

4G: 4G LTE

GPS: Beidou, Glonass, 1575.42 MHz

Tethering and casting

Ports USB: USB-C

Micro SD: up to 32GB

SIM: Nano SIM

Dual SIM capable

Docking: 2 pin pogo

Memory 3GB memory32GB storage

Other Features Fingerprint reader2D SE4710 (Moto) scanner


Using Your Conker SX50

3. Barcode reader3. Barcode reader

1. Power2. Volume up

2. Volume down

5. Fingerprint reader

5. Home

5. F2

5. F1


Thank you for purchasing this device. Please carefully read the user manual before usage.

Button Instructions

1. Power: Long press the power button to turn device on/off.In any interface, press the power button once to lock or unlock the interface. Press and hold the same button for 10 seconds to reset smartphone.

2. Volume button: When you’re listening to songs, movies, or other media, the volume buttons on the side of phone will adjust the audio volume up or down respectively. To change ringer volume, stop any media from playing on the device and use the volume key up or down. Tip: Vibration/Silent switch volume can also be set by tapping the Settings application icon: Settings->Sound

3. Barcode reader button: There are barcode reader buttons on either side of the device which are orange in colour. Push and hold either of these buttons for 3 seconds to turn on the barcode reader function. With the barcode function active, push the barcode reader button in to scan a barcode. (Note: before scanning you should open a dialog box and put the cursor in the typing field, the read information will show in the text box.)


4. Touch buttons: (from left to right)Menu: Opens the settings interface of current application.Home screen: Returns you to the home screen, press and hold the home button to show your recent apps.Return Back: Used to go back within the current application or exit the current program.

5. Physical buttons: (from left to right)F1: Configurable to open pre-installed apps with either a long press or short press. If you want to change the pre-installed program, navigate to: Settings->Key Event->F1 Key.F2: Long press and short press configurable to open pre-installed apps. If you want change the pre-installed program, navigate to: Settings->Key Event->F2 Key. Home button: Returns you directly to the home screen.Fingerprint: Can be used to unlock the device or wake up the device when locked. To set up, navigate to Settings->Security->Fingerprint. First time setup of fingerprint, the system will prompt you to set a lock pattern or PIN together with your fingerprint. If fingerprint unlock is active, you will still need to input your pattern/PIN to unlock the device after it has been restarted.

Install SIM card, Micro SD CardPlease turn off the device before installing SIM cards or Micro SD Card1. Use the provided screwdriver to open the battery cover, take out the battery, insert the SIM card or Micro SD card according to the image inside the battery compartment.2. Both SIM card slots support 4G LTE.


E: GSM3G: WCDMA4G: 4G LTE

Notification

Call forwarding Play music

Missed call Connected WLAN

New SMS or MMS Calling out

Alarm clock Airplane mode

Vibration mode Silent

Bluetooth Battery capacity

Connect to PC Barcode reader on

Connected earphone

Charging

Status Icons


User’s Manual for Battery The rechargeable battery serves as a power source for the mobile phone. It is recommended to use up as much of the battery’s charge before charging again, to prolong the life of the battery. When the charger is not in use disconnect it from the device and the plug socket before storing it appropriately to avoid damage to the charger or device.Do not leave the battery charging for over one week as excessive charging will shorten the battery life. Temperature will challenge chargeable limit of the battery, so the battery may need to be cooled down or warmed up prior to charging. Charging will fail if the battery temperature is above 55 °C or below -20 °C.Please only use the battery for its originally designed purpose. A short circuit will occur if the cathode and anode of the battery are connected via an external conductor. Never use the battery if it has been damaged. The battery life will be shortened if the battery is placed in an extremely hot or extremely cold environment outside of the tested temperatures. The mobile phone may not function properly if the battery is exposed to any extremely hot or extremely cold environment even if the battery is fully charged.Do not expose the battery to fire. Do not throw away any used batteries. Used batteries should be sent to battery recycling services and disposed in accordance with local regulations.

Safety InformationAlways observe safety regulations for protecting users and the environment when using the mobile phone.

Traffic Safety Do not use the mobile phone while driving if no hands-free devices are attached. Make sure that you are concentrating fully on the road. Please pull up your car at a safe location before you use the phone. Related regulations must be observed. Some electronics may be affected by radio waves transmitted by your mobile phone if no sufficient protection is made available.

Contact usSupport telephone: + 44 (0)1279 295830Support email: [email protected]

Sales telephone: + 44 (0)1279 295810Sales email: [email protected]

Tablet TechnologiesCalf Pens

TakeleyCM22 6NG

sx50 user manual · 2020. 12. 10. · media, the volume buttons on the side of phone will adjust...

Documents