specification for dryer
TRANSCRIPT
8/8/2019 Specification for Dryer
http://slidepdf.com/reader/full/specification-for-dryer 1/3
SPECIFICATION FOR DRYER ( Steam heater type) Capacity = 40
Kg.
Outer Dimension: 640mm(w) x 740mm(D) x1220mm(H)
( with control panel ) (910mm(H) without control panel)
Inner Dimension: 560mm(w) x 500mm(D) x 830mm(H)
1) Aluminum : Glass Woll
2) Insulation : CRCA 18 swg
3) Inner : MS-CRCA 20 swg
4) Door Sealing : As be stop gasket with aluminum channel.
5) Handle : Latch with separate Lock
6) Air Circulation : Ducts inside the Chamber Blower with manual handling.
7) Extra : Simple Temperature Indictor.
8) Temperature : Ambient to 700C
9) Temp. Accuracy : 00C to 15oC
10) Heating Load : Steam Coil
11) Heater type : Seamless Tube
12) No. of Shaves : 12 Nos.( Nos)
13) No. of Trays : 12 Nos.( Nos)
14) Tray x Size : Perforated 20 swg Size(500mmx500mm)
15) Tray : M.S. Galvanized
16) Paint (outer side) : Polyurethane, P.U.Paint
17) Paint (Inner) : Heat Resistant Paint
18) Steam Strap : 1
19) Whistle with weight : 1
20) Ball Valve : 1
21) Seamless Piping : Standard
22) Packing : Normal
8/8/2019 Specification for Dryer
http://slidepdf.com/reader/full/specification-for-dryer 2/3
SPECIFICATION FOR BOILER ( Fire Wood) Capacity 40Kg.
1) Capacity (Kg) vessel : 40
2) Mode of action : Indirect Steam Heating
3) Boiling Vessel (For Steaming : 1
Cashew kernels)
4) Dimensions (mm) : 1060mm(H)with stand x 406(OD)
5) Gauge of Metal Used (mm) : 6mm
6) Type metal : Mild Steel
7) Type Of Paint : Heat Resistant paint which can be withstand
up to 300c
8) Details of accessories provided: Press gauges, Safety valve, Drain Cock, Water
(Calibrated) Kevel, indicator
9) Any other specifies :
10) Steamer (for creating steam) : 1
11) Dimension : 440(H) x 275(OD)
11) Gauge of Metal Used (mm) : 8mm
12) Type metal : Mild-steel
13) Type Of Paint : Heat Resistant paint which can be withstand
upto 300c
14) Details of accessories provided: Press guages, Safety valve,
Drain, Level indicator,
Whistle with weight, sypho,
Water pump
15) Steem carrying pipe : Standard
16) Any other specify : -------
17) Fuel : Firewood
18) List of spares provided : on requirement
19) Water pump (hand operated) : 1
8/8/2019 Specification for Dryer
http://slidepdf.com/reader/full/specification-for-dryer 3/3
SPECIFICATION FOR CUTTER
1) Type : Standard
2) Base Plate : 410x 140mm
3) Metal used : MS
4) Thickness (mm) :
5) Dimensions (mm) : 410L& 140W
6) Spring (Qty) : 2 Nos
7) Tension : Appropriate Tension
8) Type of Spring Material : Ms hardened spring
9) Wire gauge (mm) : 3mm
10) Cutting Blade : Replicable
11) Type of Metal : Hard
12) Thickness(mm) : 1 mm (one mm)
13) Guide Rods : 10mm
14) Type of Metal : MS ( polished bar)
16) Type of Holes provided : Drilled
17) Size of Holes(mm) : 11
18) Built in : Profile Cuitting
19) List of spares provided : Extra
20) Total Weight of Unit ( Kg) : 10kg