HCP-002-6 BOMPanel Number: HCP-002-6 Date: 9/9/2014

Part Number Description QuantityPC-121006-HOSF 12 x 10 x 6 Poly Enclosure 4X 1

ABP-12X10 Back Plate, 12" x 10" Aluminum 1QOU215 Main Circuit Breaker, 2 pole, 15A 1

LC1D12G7 IEC Rated Motor Contactor 1LRD10 IEC Overload Relay, 4-6A 1

6G38TS-F Terminal Block 116G38E-F End Piece 1

S2 Ground Lug 27102C Pump Hand-Off-Auto Switch 1

3050 Series Pump Run Light - Green 1342-858 Fuse Holder, Panel Mount 1

312-003 (3AG) 1/4" x 1 1/4" Fuse, 3 Amp - 250VAC 1R10-SM Alarm Lens Assembly, Red 1

PB-120-A Alarm Buzzer, Piezo Type 1M22 Series Alarm Silence Switch 1

RJ1S-C-A120 SPDT Relay 1SJ1S-05B SPDT Socket 1

HP: 1 Volts: 230V Ph: 1 F.L.A. 10.0

HCP-002-6 (BOM)

PH: 419.281.9120 PH • FX: 419.289.8261 • info@acdcequipment.com Page 3

* ULListed * IndividuallyBoxed* Types2,3,3R,4,4X,5,12,13 * 4StainlessSteelScrews/2HoleCovers

Types6/6Pwith4Screws * 4PolycarbonateMountingFeetor* SuitableForWetLocations 2PolycarbonateMountingBars* NITW-IndustrialControlPanelEnclosures * OptionalBackPanelAdjustmentKit

Hinged Enclosure - Opaque Screw Cover - Mounting FeetSize PartNumber Description ListPrice6"x6"x4" PC-060604-HOSF 6x6x4PCEnclosure-HingedOpaqueCover-ScrewClose-MountingFeet $65.508"x8"x4" PC-080804-HOSF 8x8x4PCEnclosure-HingedOpaqueCover-ScrewClose-MountingFeet $83.5010"x8"x4" PC-100804-HOSF 10x8x4PCEnclosure-HingedOpaqueCover-ScrewClose-MountingFeet $99.5012"x10"x6" PC-121006-HOSF 12x10x6PCEnclosure-HingedOpaqueCover-ScrewClose-MountingFeet $116.0014"x12"x6" PC-141206-HOSF 14x12x6PCEnclosure-HingedOpaqueCover-ScrewClose-MountingFeet $148.0016"x14"x7" PC-161407-HOSF 16x14x7PCEnclosure-HingedOpaqueCover-ScrewClose-MountingFeet $179.00

Hinged Enclosure - Opaque Screw Cover - Mounting FlangesSize PartNumber Description ListPrice6"x6"x4" PC-060604-HOSB 6x6x4PCEnclosure-HingedOpaqueCover-ScrewClose-MountingFlanges $65.508"x8"x4" PC-080804-HOSB 8x8x4PCEnclosure-HingedOpaqueCover-ScrewClose-MountingFlanges $83.5010"x8"x4" PC-100804-HOSB 10x8x4PCEnclosure-HingedOpaqueCover-ScrewClose-MountingFlanges $99.5012"x10"x6" PC-121006-HOSB 12x10x6PCEnclosure-HingedOpaqueCover-ScrewClose-MountingFlanges $116.0014"x12"x6" PC-141206-HOSB 14x12x6PCEnclosure-HingedOpaqueCover-ScrewClose-MountingFlanges $148.0016"x14"x7" PC-161407-HOSB 16x14x7PCEnclosure-HingedOpaqueCover-ScrewClose-MountingFlanges $179.00

Hinged Enclosure - Clear Screw Cover - Mounting FeetSize PartNumber Description ListPrice6"x6"x4" PC-060604-HCSF 6x6x4PCEnclosure-HingedClearCover-ScrewClose-MountingFeet $75.508"x8"x4" PC-080804-HCSF 8x8x4PCEnclosure-HingedClearCover-ScrewClose-MountingFeet $92.0010"x8"x4" PC-100804-HCSF 10x8x4PCEnclosure-HingedClearCover-ScrewClose-MountingFeet $112.5012"x10"x6" PC-121006-HCSF 12x10x6PCEnclosure-HingedClearCover-ScrewClose-MountingFeet $135.5014"x12"x6" PC-141206-HCSF 14x12x6PCEnclosure-HingedClearCover-ScrewClose-MountingFeet $162.5016"x14"x7" PC-161407-HCSF 16x14x7PCEnclosure-HingedClearCover-ScrewClose-MountingFeet $204.50

Hinged Enclosure - Clear Screw Cover - Mounting Flanges Size PartNumber Description ListPrice6"x6"x4" PC-060604-HCSB 6x6x4PCEnclosure-HingedClearCover-ScrewClose-MountingFlanges $75.508"x8"x4" PC-080804-HCSB 8x8x4PCEnclosure-HingedClearCover-ScrewClose-MountingFlanges $92.0010"x8"x4" PC-100804-HCSB 10x8x4PCEnclosure-HingedClearCover-ScrewClose-MountingFlanges $112.5012"x10"x6" PC-121006-HCSB 12x10x6PCEnclosure-HingedClearCover-ScrewClose-MountingFlanges $135.5014"x12"x6" PC-141206-HCSB 14x12x6PCEnclosure-HingedClearCover-ScrewClose-MountingFlanges $162.5016"x14"x7" PC-161407-HCSB 16x14x7PCEnclosure-HingedClearCover-ScrewClose-MountingFlanges $204.50

7-14 © 2009 Schneider ElectricAll Rights Reserved

www.schneider-electric.us

7M

INIA

TU

RE

AN

D M

OL

DE

D C

AS

EC

IRC

UIT

BR

EA

KE

RS

QO® and QOU Miniature Circuit Breakers

QOU Miniature Circuit Breakers and QYU Supplementary ProtectorsClass 720 / Refer to Catalog 0730CT9801

Low Ampere QOU Miniature Circuit BreakersQOU unit mount miniature circuit breakers (cable-in/cable-out) are ideal for OEM applications. They have Square D’s unique Visi-Trip® feature and can be DIN rail-mounted or surface- or flush-mounted using mounting feet.

a QOU-H interrupting rating is 10 kA at 240 Vac.

High Ampere QOU Circuit Breakers

Interrupting Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7-3Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7-12, 7-15Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7-54

General Specifications Common to All Low Ampere QOU Circuit Breakers

• For convenient flush mount, surface mount or DIN mount (symmetrical rail 35 x 7.5 DIN/EN 50 022)

• Single handle with internal common trip• Terminal lug wire size (1) 14–2 AWG Cu or Al• Reversible line and load lugs• Field-installable quick connectors

• UL Listed 48 Vdc (5 k AIR)• UL Listed as HACR Type—10–70 A• High magnetic trip circuit breakers (QOU-HM) are recommended

for applications where high initial inrush may occur and forindividual dimmer applications.

• For DIN mounting rails, see IEC Starters and Relays, Section 18

Table 7.20: QOU Low Ampere Miniature Circuit Breakers

Ampere Rating

1P 120/240 Vac 2P 120/240 Vac 2P 240 Vac 3P 240 Vac

Cat. No. $ Price Cat. No. $ Price Cat. No.a $ Price Cat. No. $ Price

10 k AIR

10 A QOU110

40.20

QOU210

87.00

—

168.00

QOU310

285.00

15 A QOU115 QOU215 QOU215H QOU31520 A QOU120 QOU220 QOU220H QOU32025 A QOU125 QOU225 QOU225H QOU32530 A QOU130 QOU230 QOU230H QOU33035 A QOU135 QOU235 — — QOU33540 A QOU140 QOU240 — — QOU34045 A QOU145 QOU245 — — QOU34550 A QOU150 QOU250 — — QOU35060 A QOU160 QOU260 — — QOU36070 A QOU170 78.00 QOU270 171.00 — — QOU370 363.00

22 k AIR

15 A QOU115VH

101.00

QOU215VH

189.00

— — QOU315VH

426.0020 A QOU120VH QOU220VH — — QOU320VH25 A QOU125VH QOU225VH — — QOU325VH30 A QOU130VH QOU230VH — — QOU330VH35 A QOU135VH QOU235VH — — — —40 A QOU140VH QOU240VH — — — —45 A QOU145VH QOU245VH — — — —50 A QOU150VH QOU250VH — — — —60 A QOU160VH QOU260VH — — — —

Table 7.21: QOU-HM Miniature Circuit Breakers (10 k AIR)

Ampere Rating

1P 120/240 Vac 2P 120/240 Vac 2P 240 Vac 3P 240 Vac

Cat. No. $ Price Cat. No. $ Price Cat. No. $ Price Cat. No. $ Price

15 A QOU115HM40.20

— — — — — —20 A QOU120HM — — — — — —

Table 7.22: QYU UL1077 Recognized Supplementary Protectors (5 k AIR)

Ampere Rating

1P 277 Vac 2P 120/240 Vac 2P 240 Vac 3P 240 Vac

Cat. No. $ Price Cat. No. $ Price Cat. No. $ Price Cat. No. $ Price

10 A QYU110

122.00

— — — — — —15 A QYU115 — — — — — —20 A QYU120 — — — — — —25 A QYU125 — — — — — —30 A QYU130 — — — — — —

General Specifications Common to All High Ampere QOU Circuit Breakers

• Flush mount, surface mount, and DIN rail mount.• Internal common trip.• Non-reversible line and load lugs.• Terminal lug wire size (1) 12– 2/0 AWG Cu or Al.• UL Listed 60 Vdc per pole (5 k AIR). (Note: except switches)

• UL Listed as HACR type, 80–125 A.• Non-automatic switches have the same physical packaging

as miniature circuit breakers, but provide no overcurrent orshort circuit protection. They are UL Listed per UL1087 andare CSA certified.

Table 7.23: QOU High Ampere Miniature Circuit Breakers (10 k AIR)

Ampere Rating

1P 120/240 Vac 2P 120/240 Vac 2P 240 Vac 3P 240 Vac

Cat. No. $ Price Cat. No. $ Price Cat. No. $ Price Cat. No. $ Price

80 A QOU180176.00

QOU280246.00

— — QOU380416.0090 A QOU190 QOU290 — — QOU390

100 A QOU1100 QOU2100 — — QOU3100125 A — — QOU2125 452.00 — — — —

Table 7.24: QOU Non-Automatic Switches

Ampere Rating

1P 120 Vac$ Price

2P 120/240 Vac$ Price

2P 240 Vac $ Price

3P 240 Vac$ Price

Cat. No. Cat. No. Cat. No. Cat. No.

60 A — — — — QOU200 87.00 QOU300 285.00100 A — — — — QOU2000 246.00 QOU3000 416.00125 A — — — — QOU20001 452.00 QOU30001 716.00

Low Ampere QOU

High Ampere QOU

DE2 Discount Schedule

www.schneider-electric.us

18IE

C C

ON

TA

CT

OR

S A

ND

S

TA

RT

ER

S

18-4 © 2009 Schneider ElectricAll Rights Reserved

Contactors & Overload Relays

TeSys® D Non-reversingRefer to Catalog 8502CT9901

TeSys D contactor accessories . . . . . . . . . . . . . . . . . . . . pages 18-8 to 18-11TeSys D overload relay accessories . . . . . . . . . . . . . . . . . . . . . . . page 18-16TeSys D replacement coils. . . . . . . . . . . . . . . . . . . . . . . pages 18-17 to 18-19Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 18-40 to 18-46TeSys T. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . pages 16-91

LC1D09

LC1D40A

LC1D093

LC1D115

LRD22

LRD3

E164862CCN NLDX

LR43364Class 3211 04

Table 18.1: 3- or 4-Pole Screw Terminal Connections

Maximum Horsepower RatingsMaximum Current

Utilization Categories

No of PolesInstantaneous

AuxiliaryContacts Catalog

Number a

$ Price

Single Phase Three Phase InductiveAC3

Amperes

ResistiveAC1

AmperesN.O. N.C. N.O. N.C.

115 V hp 230 V hp 200 V hp 230 V hp 460 V hp 575 V hp AC Coils DC Coils

0.5 1 2 2 5 7.5 920

3 01 1

LC1D09 cde 94.00 119.00— — — — — — — 4 LC1DT20 c 94.00 119.00— — — — — — — 2 2 LC1D098 c 94.00 119.001 2 3 3 7.5 10 12

253 0

1 1LC1D12 cde 119.00 149.00

— — — — — — — 4 LC1DT25 c 119.00 149.00— — — — — — — 2 2 LC1D128 c 119.00 149.001 3 5 5 10 15 18

323 0

1 1LC1D18 cd 136.00 160.00

— — — — — — — 4 LC1DT32 c 149.00 183.00— — — — — — — 2 2 LC1D188 c 149.00 183.002 3 7.5 7.5 15 20 25

403 0

1 1LC1D25 cd 151.00 181.00

— — — — — — — 4 LC1DT40 c 193.00 240.00— — — — — — — 2 2 LC1D258 c 193.00 240.002 5 10 10 20 30 32 50 3 0 1 1 LC1D32 cd 172.00 213.003 5 10 10 30 30 40

603

01 1 LC1D40A 218.00 275.00

— — — — — — — 4 0 0 LC1DT60A 296.00 353.003 7.5 15 15 40 40 50

803 0 1 1 LC1D50A 234.00 291.00

5 10 20 20 40 50 65 3 LC1D65A 322.00 379.00— — — — — — — 4 0 0 0 LC1DT80A 446.00 503.007.5 15 25 30 60 60 80

1253 0 1 1 LC1D80 363.00 420.00

— — — — — — — 40 0

LC1D80004 b 489.00 524.00— — — — — — — 2 2 LC1D80008 b 489.00 524.00— — 30 40 75 100 115

2003

01 1 LC1D115 479.00 479.00

— — 40 50 100 125 150 3 LC1D150 696.00 696.00— — — — — — — 4 0 0 LC1D115004 630.00 630.00

a Complete catalog number with coil voltage code from table on page 18-6; example, LC1D09G7. b For DC version of these devices replace the 'C' with 'P' (ex. LC1D80004** becomes LP1D80004**). This applies only to 80A 4 pole devices.c On LC1D09 - LC1D65A and LC1DT20 through LC1DT80A, for ring tongue versions add '6' to the catalog number prior to adding the voltage code

(ex. LC1D09G7 becomes LC1D096G7 and LC1D50AG7 becomes LC1D50A6G7). No price adder for this modification.d On LC1D09 - LC1D65A, for spring terminals versions add '3' to the catalog number prior to adding the voltage code (ex. LC1D12G7 becomes

LC1D123G7 and LC1D40AG7 becomes LC1D40A3G7 - Note that 40A to 65A spring terminals are only on the control terminations and not on power terminations). No price adder for this modification.

e On LC1D09 and LC1D12 only, for slip-on connector versions add "9" to the catalog number prior to adding the voltage code (ex. LC1D09G7 becomes LC1D099G7). No price adder for this modification.

Table 18.2: TeSys D Overload Relays — Ambient Compensated, Bi-Metallic Direct Mount

Current Setting Range Amperes

For Direct Mountingto LC1...

Class 10 with Single Phase

Sensitivity

Class 10 without Single Phase

Sensitivity

Class 20 with Single Phase

Sensitivity

Class 20 without Single Phase

Sensitivity$ Price

0.10–0.16

D09–D32

LRD01 LR3D01 — —

60.00

0.16–0.25 LRD02 LR3D02 — —0.25–0.40 LRD03 LR3D03 — —0.40–0.63 LRD04 LR3D04 — —

0.63–1 LRD05 LR3D05 — —1–1.6 LRD06 LR3D06 — —

1.6–2.5 LRD07 LR3D07 — —2.5–4 LRD08 LR3D08 LRD1508 LR3D1508A14–6 LRD10 LR3D10 LRD1510 LR3D1510A1

5.5–8 D09–D32 LRD12 LR3D12 LRD1512 LR3D1512A1

62.00

7–10 D09–D32 LRD14 LR3D14 LRD1514 LR3D1514A19–13 D12–D32 LRD16 LR3D16 LRD1516 LR3D1516A112–18 D18–D32 LRD21 LR3D21 LRD1521 LR3D1521A116–24 D25–D32 LRD22 LR3D22 — —17–25 D25–D32 — — LRD1522 LR3D1522A123–32 D25–D32 LRD32 LR3D32 — —

73.0023–28 D25–D32 — — LRD1530 LR3D1530A125–32 D25–D32 — — LRD1532 LR3D1532A130–38 D32 LRD35 LR3D35 — —9-13 D40A-D65A f LRD313 LR3D313 LRD313L —

107.00

12-18 D40A-D65A f LRD318 LR3D318 LRD318L —16-25 D40A-D65A f LRD325 LR3D325 LRD325L —23-32 D40A-D65A f LRD332 LR3D332 LRD332L —30-40 D40A-D65A f LRD340 LR3D340 LRD340L —37-50 D40A-D65A f LRD350 LR3D350 LRD350L —48-65 D40A-D65A f LRD365 LR3D365 LRD365L —17-25 D40-D80 g LRD3322 LR3D3322 LR2D3522 LR3D3522

107.0023-32 D40-D80 g LRD3353 LR3D3353 LR2D3553 LR3D355330-40 D40-D80 g LRD3355 LR3D3355 LR2D3555 LR3D355537-50 D50-D80 g LRD3357 LR3D3357 LR2D3557 LR3D355748-65 D50-D80 g LRD3359 LR3D3359 LR2D3559 LR3D355955–70 D65–D80 LRD3361 LR3D3361 LR2D3561 LR3D3561

127.0063–80 D65–D80 LRD3363 LR3D3363 LR2D3563 LR3D356380–104 D80 LRD3365 — — —80–104 D115–D150 LRD4365 — — —

362.0095–120 D115–D150 LRD4367 — — —110–140 D150 LRD4369 — — —

f Overload relays with Everlink termination - direct mount to D40A to D65A only.g Direct mount to old D2 style D40 to D65 (no Everlink terminations) and to D80 only.

I12 Discount Schedule

Product Data Sheet

6G38 TS F 3/8” Sectional Terminal Block Flat Mount 50 Amps, 600 Volts (AC/DC)

32 Circuits Per Foot

Copper Wire Only TS: Tubular Connector Wire Range with Wire Binding Screw: #8 - #18 AWG

Wire Termination Torque: 16 in. lbs

See table below for Wire Classes and torque

Electrical Ratings: • 50A (Based on NEC Table 310-16, 75°C columns)• 600 Volts AC/DC (UL 1059 Class C, User Group – General Industrial)• Short Circuit Current Rating: 10,000A (Default)• Factory and field wiring

Mechanical Ratings: • Insulator base temperature: -40°C/F 125°C (257°F)* UL RTI• Flammability rating of insulator base: UL 94V-0• Touch protection: IP-20 (IEC 60529)* Use outside these ratings needs to be judged in the end-use application.

Materials: • Insulator base: Glass-filled polycarbonate (Gray Thermoplastic)• Tubular Screw Connector: Copper, tin plated• Screw, #10-32: Steel, nickel plated

Agency Approvals: • UL Recognized, UL 1059 Terminal Block Standard, File No. XCFR2.E62806• CSA Certified, CSA C22.2 No. 158, File No. LR19766• CE compliant, IEC 60947-7-1• RoHS Compliant

Wire Range:

Copper Wire Stranding Classes - Number of ConductorsWire Size Torque Solid Class B Class C Class G Class H Class I Class K

8 16 in. lbs 1 110 16 in. lbs 1 1 1 1 112 16 in. lbs 1 - 3 1 - 3 1 - 3 1 114 16 in. lbs 1 - 4 1 - 4 1 - 2 1 - 2 1 - 216 16 in. lbs 1 1 1 1 - 218 16 in. lbs 1 1 1 - 2

For information on copper stranded wire classes, please reference: http://www.marathonsp.com/CatalogPDFs/Flexible-Stranded-Wire.pdf

Mounting: • Panel mountable: #8 (M4) fastener, torque to 15-20 in. lbs.

Standard Pack Qty is 100

Accessories:

• Jumper: J-38

• End section: 6G38 E F

• Marking Strip (1/2” x 2” white: MS 2

Gaynor Toggle Switches

SPST SPDT

Toggle Position Catalog Number Type of Termination

Ratings Circuit UP Center Down

(keyway) .187 Q.C. Screw .250 Q.C. Solder Lug

7100 Series Toggle ON None OFF 7105A 7105B 7105C 7105D

(ON) None OFF 7135A 7135B 7135C 7135D SPST

ON None (OFF) 7145A 7145B 7145C 7145D ON None ON 7101A 7101B 7101C 7101D ON OFF ON 7102A 7102B 7102C 7102D

(ON) None ON 7151A 7151B 7151C 7151D (ON) OFF ON 7152A 7152B 7152C 7152D

6A-125VAC

3A-250VAC

SPDT

(ON) OFF (ON) 7162A 7162B 7162C 7162D

7000 Series Toggle ON None OFF 7005A 7005B 7005C 7005D

(ON) None OFF 7035A 7035B 7035C 7035D SPST

ON None (OFF) 7045A 7045B 7045C 7045D ON None ON 7001A 7001B 7001C 7001D ON OFF ON 7002A 7002B 7002C 7002D

(ON) None ON 7051A 7051B 7051C 7051D (ON) OFF ON 7052A 7052B 7052C 7052D

15A-125VAC

10A-250VAC

SPDT

(ON) OFF (ON) 7062A 7062B 7062C 7062D

7200 Series Toggle ON None OFF 7205A 7205B 7205C 7205D

(ON) None OFF 7235A 7235B 7235C 7235D SPST

ON None (OFF) 7245A 7245B 7245C 7245D ON None ON 7201A 7201B 7201C 7201D ON OFF ON 7202A 7202B 7202C 7202D

(ON) None ON 7251A 7251B 7251C 7251D (ON) OFF ON 7252A 7252B 7252C 7252D

20A-125VAC

10A-250VAC

3/4 HP,

125-205VAC

SPDT

(ON) OFF (ON) 7262A 7262B 7262C 7262D

TOGGLE SWITCHES 7300 ON NONE OFF 7305A 7305B 7305C 7305D

( ON ) NONE OFF 7335A 7335B 7335C 7335D SPST

ON NONE ( OFF ) 7345A 7345B 7345C 7345D ON NONE ON 7301A 7301B 7301C 7301D ON OFF ON 7302A 7302B 7302C 7302D

( ON ) NONE ON 7351A 7351B 7351C 7351D ( ON ) OFF ON 7352A 7352B 7352C 7352D

20A-3125VAC

10A-250VAC

1 HP,

125-250VAC

SPDT

( ON ) OFF ( ON ) 7362A 7362B 7362C 7362D

( ) Denotes Momentary For .687 Toggle And .468 Bushing Length Add -100 To Part Number Specified

Notes:

For Dust And Moisture Resistant Seal Add "S" To part Number Specified (Standard Feature On Momentary Switches)

Specifications

• Agency Listings .RU CSA Certified • Contact Mechanism

Slow-Make/Slow-Break Butt Contacts • Contact Material

7100 Series: Stationary - Copper Alloy/Silver Plated Movable - Copper Alloy

7000 And 7200 Series: Stationary (Center) - Copper Alloy/Silver Plated Stationary (End) - Silver Cadmium Oxide

Composite Movable-Silver Cadmium Oxide Composite

7300 Series: Stationary (Center): Copper Alloy/Silver Plated Stationary (End): Silver Cadmium Oxide Composite Movable: Copper Alloy/Silver Plated

• Dielectric Strength 1000 Volts RMS Minimum • Mounting Means

15/32" Diameter Threaded Bushing Keyway .078-.083 Wide X .037-.043 Deep Standard Hardware Supplied:

One Hex Nut Assembled One Hex Nut Unassembled

SERIES

Sorenson Lighted Controls, Inc. 1-800-275-7089 (860) 527-3092

.49

.41

.49

.20

.49

.05

.66

.17

.49

.41 .26

.45 SQ.

.56 .57

.39

.28

.66

.11

.63

.45

ADDITIONAL OPTIONS (see Pricing Adders)

Terminals attached to wire leadsRetaining clipsHigh temperature wire leadsPotted lampAdditional voltages are available

Solder Lugs (29 only)Custom MarkingGreen / Blue Neon LampsF1C ShieldBlue / White LEDs

SPECIFICATIONS

Body Material: NylonLens Material: PolycarbonateBezel Material: Stainless SteelPanel Thickness: 0.030" to 0.093"Certifications: UL, CSA ,

VDE on series28 & 29

• Fits into 0.500" panel hole• LED, incandescent, and neon illumination• Many lens styles available

28, 29 & 30

.45

.32.50" DIA. MOUNTING HOLE ("D" HOLE CUTOUT OPTIONALSERIES 30 ONLY)

.46

.281.09

.50" DIA.MOUNTING HOLE

.20.91

.10

6.00

.50

6.00

.50

1.0930 with 43 lens

White lens is TranslucentClear lens is Transparent

6

Color CodeWhite 1Black 2

Color PlainRed 1

Amber 2Clear2 3Green 4Blue 5

White 6

Color MarkedRed A

Amber BClear2 CGreen DBlue E

White F

2829305

Style Code.09 Cylinder Translucent1,4,6 371.09 Cylinder Diamond4,6 373.09 Cylinder Rings4,6 376.25 Cylinder Translucent1,6 381.25 Cylinder Diamond6 383.25 Cylinder Rings6 386.46 Cylinder Translucent1,6 391.46 Cylinder Diamond6 393.46 Cylinder Rings6 396Small Dome Translucent1,6 401Small Dome Rings6 406Large Dome Translucent1,6 411Large Dome Rings6 416Semi Dome Translucent1 421Semi Dome Rings 426Flush Lens w/Tapered Bezel3,6 626Square Translucent1,6,7 431Square Rings6,7 436Cap, Black (F1C) 443

Style Code6" Wire 1.187 Tabs5 3.250 Tabs5 4Solder 5Special X

Finish CodeNone 0

Stainless 1Chrome 2

Black 3

Voltage Type Code2 LED 106 LED 11

14 LED 1228 LED 13

6 INCAND 3214 INCAND 3528 INCAND 39

125 NEON 50250 NEON 52

Special XX

XX XX - X - X X - XXX X 0

Series Lamp BaseTermination Bezel3 Lens

1. Translucent Lens is not recommended for use with LED2. Specify LED Color if applicable3. Chrome Bezel only4. Lens 37 not available with lamps 11-13 on Series 305. Series 30 supplied with tab terminals only6. Bezel required7. Chrome or Black Bezel only

Lens 38 Lens 39Lens 37 Lens 40

Lens 42 Lens 43Lens 41 Cap (F1C) 44Lens 62

29 with 38 lens

28 with 40 lens28 Series

30 Series

29 Series

wire leads

wire leads

tab terminals

474 w w w. l i t t e l f u s e . c o m

FuseholdersFor 3AG Fuses

Traditional Panel Mount Type

APPROVALS: Recognized under the Components Program ofUnderwriters Laboratories and Certified by CSA.

SPECIFICATIONS:Electrical: Rated at 20 amperes for any voltage up to 250 volts.Dielectric Strength: 2400 volts minimum.Mounting: Withstands 15 lb.-in. mounting torque;maximum panel thickness: .187".Molded Parts: Black thermoplastic (UL 94V0).Knob: Bayonet style with lettering.

Terminals: Copper & copper alloy. Tin plated, except 1/4" Quick-Connectterminals are nickel plated.Ambient Temperature: –40°C to +85°C.FUSEHOLDERS TO MIL SPEC:1 See Military Section.

* Please refer to Fuseology section for information on proper fuseholder de-rating.

342 000 Series

® ® QPL

ORDERING INFORMATION:Catalog Number

Fluted Knurled Type ofKnob Knob Terminal

342 014 342 012 Solder342 038 342 058 3/16" Q.C.342 838 342 858 1/4" Q.C.

Knurled knob shown. Fluted knob alsoavailable. See table below.

.085" X .12"HOLE

.78"

1"

.7"

1"

.020"

.78"

1"

.032".63"

.14" DIA. HOLE

.502"

.510"

.187"

.475"

.480"

.69"DIA.

.69"HEX

FLATS

.250"

.69"DIA.TYP..56"

.69" DIA.

.59"

DETENT.06" DIA.HOLE

.45"FLATSTYP.

ORDERING INFORMATION:Catalog Number

Fluted Knurled Type ofKnob Knob Terminal

342 004 342 022 Solder342 028 342 048 3/16" Q.C.342 828 342 848 1/4" Q.C.

Fluted knob shown. Knurled knob alsoavailable. See table below.

Right Angle Terminal

342 000 Series

.7"

.11" DIA.

.090" X .12"HOLE

1.31"

.78"

1"

.3"

.7"

1"

.4"

.020" .032"

.502"

.510".45"FLATS

TYP.

.69"HEX

FLATS

.475"

.480"

Straight Bottom Terminal

PbRoHS

Axial Lead and Cartridge Fuses

401w w w. l i t t e l f u s e . c o m

Glass Body

3AG Fast-Acting Type 312/318 Series

1000

100

10

1

0.1

0.011 10 1000.01 0.1

.031

A

.062

A

.125

A

.250

A.3

75 A

.500

A.7

50 A

1 A

1.5

A2

A2.

5 A

3 A

4 A

5 A

6 A

7 A

8 A

10 A

0.005

TIM

E IN

SE

CO

ND

S

CURRENT IN AMPERES

Cartridge Axial Lead Nominal NominalCatalog Catalog Ampere Voltage Resistance Melting I2tNumber Number Rating Rating Cold Ohms A2 Sec.312.031 318.031 1/32 250 23.3 0.0000300312.062 318.062 1/16 250 24.5 0.000249312.100 318.100 1/10 250 11.2 0.00102312.125 318.125 1/8 250 7.10 0.00289312.150 318.150 15/100 250 5.10 0.00550312.175 318.175 .175 250 3.85 0.00960312.187 318.187 3/16 250 3.40 0.0128312.200 318.200 2/10 250 3.00 0.0165312.250 318.250 1/4 250 2.00 0.0355312.300 318.300 3/10 250 1.40 0.0689312.375 318.375 3/8 250 0.820 0.185312.500 318.500 1/2 250 0.495 0.483312.600 318.600 6/10 250 0.360 0.880312.750 318.750 3/4 250 0.243 1.84312 001 318 001 1 250 0.189 0.760312 1.25 318 1.25 11/4 250 0.138 1.45312 01.5 318 01.5 11/2 250 0.103 2.35312 01.6 318 01.6 16/10 250 0.0930 2.80312 1.75 318 1.75 13/4 250 0.0850 3.60312 01.8 318 01.8 18/10 250 0.0820 3.85312 002 318 002 2 250 0.0700 5.20312 2.25 318 2.25 21/4 250 0.0590 7.20312 02.5 318 02.5 21/2 250 0.0510 9.54312 003 318 003 3 250 0.0424 14.0312 004 318 004 4 250 0.0291 28.5312 005 318 005 5 250 0.0223 50.0312 006 318 006 6 250 0.0177 81.1312 007 318 007 7 250 0.0145 118.0312 008 318 008 8 250 0.0121 166.0312 010 318 010 10 250 0.00925 298.0312 012 — 12 32 0.0071 —312 015 — 15 32 0.0052 —312 020 — 20 32 0.0034 —312 025 — 25 32 0.0024 —312 030 — 30 32 0.0019 —312 035 — 35 32 0.0013 —

Average Time Current Curves

312 000 Series 318 000 Series

6.35(.25")

32.385(1.275")

31.75(1.25")

6.985 (.275") 0.813(.032")

38.1(1.50") TYP.

Axial Lead Material: Solder coated copper.

A standard for cost-effective reliability and performance in circuit protec-tion, the 3AG fuse satisfies a broad range of application requirements.ELECTRICAL CHARACTERISTICS:

% of Ampere Ampere OpeningRating Rating Time100% 1/32–35 4 hours, Minimum135% 1/32–35 1 hour, Maximum

1/32–10 5 sec., Maximum200% 12–30 10 sec., Maximum

35 20 sec., Maximum

AGENCY APPROVALS: Listed by Underwriters Laboratories andCertified by CSA through 30 amperes.1/100–10 amperes listed to UL 248-14 (UL 198-G)12–30 amperes listed to UL 275.AGENCY FILE NUMBERS: UL E10480, CSA LR 29862.INTERUPTING RATING:10,000A @ 125VAC35A @ 250VAC

ORDERING INFORMATION:

®UL ®

11

AX

IAL

LE

AD

AN

DC

AR

TR

IDG

E F

US

ES

30 Control Products Catalog CA08102001E—August 2010 www.eaton.com

474747474747474747474747474747474747474747474747474747474747

47.4 Pushbuttons and Indicating Lights

22.5 mm Modular Pushbuttons—M22

22.5 mm Modular Pushbuttons—M22 ContentsDescription Page

22.5 mm Modular Pushbuttons—M22Product Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . 31

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Coding Adapter Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 103

Technical Data and Specifications . . . . . . . . . . . . . . . . . 104

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Symbols Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

DrawingsOnline

Product DescriptionEaton’s M22 industrial heavy-duty pushbutton line offers a wide array of functional, attractive and ergonomically designed illuminated and non-illuminated pushbuttons, selector switches, push-pulls, alternate action and twist-to-release operators. The complete illuminated line is only offered in LED light units to ensure high-quality brightness and up to 100,000 hours of LED illumination. M22 operators are available with either a silver or a black colored bezel. The space-saving modular construction of the M22 line makes on-the-job assembly fast and simplifies the stocking of both components and complete devices.

Highly Modular and Versatile Line● Field convertible functions

(pushbuttons and selector switches), maintained to momentary

● Customizable laserengraving capabilities

LED Indicators● 100,000 hours of life

in high-vibration environments

● Lenses specificallydesigned for LED illumination

Rugged Design● Most pushbutton

operators and contact blocks exceed 5 million mechanical operations

● All components have IP66rating, and some carry IP67 and IP69K for washdown environment; see Page 104 for further technical data

Innovative Technologies● ASi communicating

devices● Palm switches

Standards and CertificationsAll operators and components are IEC/EN 60947 VDE 0660.

All operators carry an IP66 rating with some rated for washdown environment with IP67 and IP69K.

All pushbuttons, emergency-stops, indicating lights, potentiometers and selector switches carry NEMA 4X, 13.

Marine classification societies: Bureau Veritas (BV), Germanischer Lloyd (GL), and Lloyd’s Register of Shipping (LR) approved.

36 Control Products Catalog CA08102001E—August 2010 www.eaton.com

474747474747474747474747474747474747474747474747474747474747

47.4 Pushbuttons and Indicating Lights

22.5 mm Modular Pushbuttons—M22

Catalog Number SelectionCatalog Number Selection is for illustrative purposes only and not to be used to create new catalog numbers.

Non-Illuminated Pushbuttons

Product SelectionNon-Illuminated Pushbuttons, Flush, Momentary

Complete Devices

Note� All NC contact blocks are positively driven contact.

Bezel Button ColorContact BlockConfiguration � Catalog Number

Silver Black NO M22-D-S-K10

NC M22-D-S-K01

2NO M22-D-S-K20

2NC M22-D-S-K02

1NO-1NC M22-D-S-K11

Red NO M22-D-R-K10

NC M22-D-R-K01

2NO M22-D-R-K20

2NC M22-D-R-K02

1NO-1NC M22-D-R-K11

Green NO M22-D-G-K10

NC M22-D-G-K01

2NO M22-D-G-K20

2NC M22-D-G-K02

1NO-1NC M22-D-G-K11

Black Black NO M22S-D-S-K10

NC M22S-D-S-K01

2NO M22S-D-S-K20

2NC M22S-D-S-K02

1NO-1NC M22S-D-S-K11

Red NO M22S-D-R-K10

NC M22S-D-R-K01

2NO M22S-D-R-K20

2NC M22S-D-R-K02

1NO-1NC M22S-D-R-K11

Green NO M22S-D-G-K10

NC M22S-D-G-K01

2NO M22S-D-G-K20

2NC M22S-D-G-K02

1NO-1NC M22S-D-G-K11

BezelM22 = Silver

M22S = Black

M22 – D – S – X0 – K10

� Silver bezel only.

Operator TypeD = Flush momentary

DH = Extended momentaryDG = Flush with guard �DR = Flush maintained

DGH = Extended momentary with guard �DRH = Extended maintained

Button Plate ColorG = GreenY = YellowB = Blue

S = BlackR = Red

W = White

InscriptionGB0 = STOPGB1 = STARTGB2 = CLOSEGB3 = UPGB4 = DOWNGB5 = OFFGB6 = ON

GB14 = RESETGB15 = FORWARDGB16 = REVERSE

X0 =X1 =X4 =X5 =X6 =X7 =X8 =

Contact BlocksK10 = 1NOK01 = 1NCK20 = 2NOK02 = 2NCK11 = 1NO-1NC

K30 = 3NOK03 = 3NCK21 = 2NO-1NCK12 = 1NO-2NC

M22-D-G-K10

M22S-D-G-K10

RJ Series

736 www.idec.com

Sw

itch

es &

Pil

ot L

ight

sD

ispl

ay L

ight

sR

elay

s &

Soc

kets

Tim

ers

Term

inal

Blo

cks

Cir

cuit

Bre

aker

s

Relays & Sockets

RJ Series Slim Power Relays

Compact and rugged power relays. Large switching capacity.Compact housing only 12.7-mm wide.Large contact ratingRJ1 (1-pole): 16A (UL general use rating @250V AC)RJ2 (2-pole): 8A

Non-polarized LED indicator available on blade type. IDEC’s unique light guide structure enables high visibility of coil status from any direction.

Excellent electrical and mechanical life.Electrical life: 200,000 operations (AC load)Mechanical life: 30 million operations (AC coil)

RoHS directive compliant (EU directive 2002/95/EC). Contains no lead, cadmium, mercury, hexavalent chromium, PBB or PBDE).

Diode model:Diode reverse withstand voltage: 1000V

UL recognized, CSA certifi ed, EN compliant.

UL508 UL File No. E55996

CSA C22.2 No. 141608322CSA File No. LR35144

Reg.-Nr. B312

EN61810-1VDE (REG.-Nr B312)

EN61810-1EC Low Voltage Directive

Part Number Selection

Terminal Contact Model Part NumberCoil Voltage Code (Standard Stock in bold)

Blade

SPDT

Standard RJ1S-C- A24, A110, A120, A220, A240, D12, D24, D48, D100with LED RJ1S-CL-

with Surge Suppresion Diode

RJ1S-CD-

D12, D24, D48, D100with LED & Surge Suppre-sion Diode

RJ1S-CLD-

DPDT

Standard RJ2S-C- A24, A110, A120, A220, A240, D12, D24, D48, D100with LED RJ2S-CL-

with Surge Suppresion Diode

RJ2S-CD-

D12, D24, D48, D100with LED & Surge Suppre-sion Diode

RJ2S-CLD-

PCB

SPDTStandard RJ1V-C-

A24, A110, A120, A220, A240, D5, D6, D12, D24, D48, D100

High Capacity RJ1V-CH-

SPST-NOStandard RJ1V-A-

High Capacity RJ1V-AH-

DPDT Standard RJ2V-C-

DPST-NO Standard RJ2V-A-

Ordering InformationWhen ordering, specify the Part No. and coil voltage code:

(example) RJ1S-C- A120

Part No. Coil Voltage Code

Coil Voltage Table

Coil Voltage Code A12 A24 A110 A120 A220 A240 D5 D6 D12 D24 D48 D100

Coil Rating 12V AC 24V AC 110V AC 120V AC 220V AC 240V AC 5V DC 6V DC 12V DC 24V DC 48V DC 100-110V DCV DC

•

•

•

•

•

•

RJ Series

737USA: 800-262-IDEC Canada: 888-317-IDEC

Sw

itches & P

ilot LightsD

isplay LightsR

elays & S

ocketsTim

ersTerm

inal Blocks

Circuit B

reakers

Relays & Sockets

Sockets

Relays Standard DIN Rail Mount Finger-safe DIN Rail Mount PCB Mount

Bla

de

Mod

els RJ1S (Std) SJ1S-05B SJ1S-07L SJ1S-61

RJ2S (Std) SJ2S-05B SJ2S-07L SJ2S-61

PC

B

Mod

els RJ1V (Std) — SQ1V-07B* SQ1V-63*

RJ1V (HC) RJ2V

— SQ2V-07B* SQ2V-63*

*Hold-down clip or spring must be removed to use with RJ PCB relays.

Accessories

Description Appearance Use with Part No. Remarks

Aluminum DIN Rail (1 meter length)

All DIN rail sockets BNDN1000

IDEC offers a low-profi le DIN rail (BNDN1000). The BNDN1000 is de-signed to accommodate DIN mount sockets. Made of durable extruded aluminum, the BNDN1000 measures 0.413 (10.5mm) in height and 1.37 (35mm) in width (DIN standard). Standard length is 39” (1,000mm).

DIN Rail End Stop

DIN rail BNL5 9.1 mm wide.

Replacement Hold Down Springs

Part Number Used With Socket

SJ9Z-C1SJ1S-05B, SJ1S-07L,SJ2S-05B, SJ2S-07L

SQ9Z-C SQ1V-07B, SQ2V-07B

SQ9Z-C63 SQ1V-63, SQ2V-63

Jumpers for SJ Sockets

Poles Part Number Quantity

2 SJ9Z-JF2Must purchase in quantities of 10.

5 SJ9Z-JF5

8 SJ9Z-JF8

10 SJ9Z-JF10

Specifi cations

Model RJ1 RJ2

Number of Poles 1-pole 2-pole

Contact Confi guration SPDT DPDT

Contact Material Silver-nickel alloy

Degree of Protection IP40

Contact Resistance (initial value) (*1) 50 mΩ maximum

Operate Time (*2) 15 ms maximum

Release Time (*2) 10 ms maximum (with diode: 20 ms maximum)

Dielectric Strength

Between contact and coil 5000V AC, 1 minute 5000V AC, 1 minute

Between contacts of the same pole 1000V AC, 1 minute 1000V AC, 1 minute

Between contacts of different poles — 3000V AC, 1 minute

Vibration Resistance

Operating extremes 10 to 55 Hz, amplitude 0.75 mm

Damage limits 10 to 55 Hz, amplitude 0.75 mm

Shock Resistance

Operating extremes NO contact: 200 m/s2, NC contact: 100 m/s2

Damage limits 1000 m/s2

Electrical Life (rated load)AC load: 200,000 operations minimum (operation frequency 1800 operations per hour)DC load: 100,000 operations minimum (operation frequency 1800 operations per hour)

Mechanical Life (no load)AC coil: 30,000,000 operations minimum (operation frequency 18,000 operations per hour)DC coil: 50,000,000 operations minimum (operation frequency 18,000 operations per hour)

Operating Temperature (*3) –40 to +70°C (no freezing)

Operating Humidity 5 to 85% RH (no condensation)

Weight (approx.) 19g (blade type), 17g (PCB form C type), 16g (PCB form A type)

Note: Above values are initial values.1. Measured using 5V DC, 1A voltage drop method.2. Measured at the rated voltage (at 20°C), excluding contact bounce time.3. 100% rated voltage.