sea box | intermodal concepts | iso shipping containers | … · 2020. 3. 19. · sb812.st.apq1.dla...

43

Upload: others

Post on 27-Jan-2021

4 views

Category:

Documents


0 download

TRANSCRIPT

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    812.ST.A

    PQ

    1.DLA

    • 040213-R00

    Container with Adaptor Plates shown with Removable Drawer Modules (sold separately)

    Quadcon (Type 2) w

    ith Adaptor Plate O

    ne Side

    Quadcon (Type 2) with Adaptor Plate One Side

    FEATURES• Standard Quadcon Type 2 (Part #: SB812) with swing

    doors on two sides• Patented adaptor plate system on one side which

    provides a method to mount any Quadcon Size Storage Module

    • Full array of Drawer and Shelf Modules are available to transport and store small,medium and large sized parts

    • Adaptor Plate allows Removable Modules to be easily loaded, unloaded, and moved via forklift

    • Plate features foolproof locking system which ensures that the doors of the container cannot be closed until the shot bolt mechanism is engaged correctly into the Removable Module

    • Adaptor plate incorporates location and guide features to ensure that the Removable Module is in the correct position for transportation, eliminating the need for blocking and bracing

    • In a matter of minutes, the Removable Modules are loaded, locked down and the container doors closed and ready for quick, product-safe deployment

    • Standard Tan

    Adaptor Plate shown above Can also be purchased in Half-Width Size

    (SB3453.HAPQ.DLA)

    SB812LENGTH HEIGHT WIDTH DOOR OPENING

    Exterior Interior Exterior Interior Exterior Interior Height Width

    Ft. in. 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

    Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362

    TARE WEIGHT PAYLOAD GROSS WEIGHT CUBIC CAPACITY

    Lbs. 2,000 9,200 11,200 220 Cu. Ft.

    Kgs. 907 4,173 5,080 6.22 Cu. M.

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    812.SG

    .AP

    Q1.D

    LA

    • 040213-R00

    Container with Adaptor Plates shown with Removable Drawer Modules (sold separately)

    Quadcon (Type 2) w

    ith Adaptor Plate O

    ne Side

    Quadcon (Type 2) with Adaptor Plate One Side

    Adaptor Plate shown above

    SB812LENGTH HEIGHT WIDTH DOOR OPENING

    Exterior Interior Exterior Interior Exterior Interior Height Width

    Ft. in. 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

    Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362

    TARE WEIGHT PAYLOAD GROSS WEIGHT CUBIC CAPACITY

    Lbs. 2,000 9,200 11,200 220 Cu. Ft.

    Kgs. 907 4,173 5,080 6.22 Cu. M.

    FEATURES• Standard Quadcon Type 2 (Part #: SB812) with swing

    doors on two sides• Patented adaptor plate system on one side which

    provides a method to mount any Quadcon Size Storage Module

    • Full array of Drawer and Shelf Modules are available to transport and store small,medium and large sized parts

    • Adaptor Plate allows Removable Modules to be easily loaded, unloaded, and moved via forklift

    • Plate features foolproof locking system which ensures that the doors of the container cannot be closed until the shot bolt mechanism is engaged correctly into the Removable Module

    • Adaptor plate incorporates location and guide features to ensure that the Removable Module is in the correct position for transportation, eliminating the need for blocking and bracing

    • In a matter of minutes, the Removable Modules are loaded, locked down and the container doors closed and ready for quick, product-safe deployment

    • Standard Green

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    812.ST.A

    PQ

    2.DLA

    • 040213-R00

    Container with Adaptor Plates shown with Removable Drawer Modules (sold separately)

    Quadcon (Type 2) w

    ith Adaptor Plate B

    oth Sides

    Quadcon (Type 2) with Adaptor Plate Both Sides

    Adaptor Plate shown above

    SB812LENGTH HEIGHT WIDTH DOOR OPENING

    Exterior Interior Exterior Interior Exterior Interior Height Width

    Ft. in. 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

    Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362

    TARE WEIGHT PAYLOAD GROSS WEIGHT CUBIC CAPACITY

    Lbs. 2,000 9,200 11,200 220 Cu. Ft.

    Kgs. 907 4,173 5,080 6.22 Cu. M.

    FEATURES• Standard Quadcon Type 2 (Part #: SB812) with swing

    doors on two sides• Patented adaptor plate system on one side which

    provides a method to mount any Quadcon Size Storage Module

    • Full array of Drawer and Shelf Modules are available to transport and store small,medium and large sized parts

    • Adaptor Plate allows Removable Modules to be easily loaded, unloaded, and moved via forklift

    • Plate features foolproof locking system which ensures that the doors of the container cannot be closed until the shot bolt mechanism is engaged correctly into the Removable Module

    • Adaptor plate incorporates location and guide features to ensure that the Removable Module is in the correct position for transportation, eliminating the need for blocking and bracing

    • In a matter of minutes, the Removable Modules are loaded, locked down and the container doors closed and ready for quick, product-safe deployment

    • Standard Tan

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    812.SG

    .AP

    Q2.D

    LA

    • 040213-R00

    Container with Adaptor Plates shown with Removable Drawer Modules (sold separately)

    Quadcon (Type 2) w

    ith Adaptor Plate B

    oth Sides

    Quadcon (Type 2) with Adaptor Plate Both Sides

    Adaptor Plate shown above

    SB812LENGTH HEIGHT WIDTH DOOR OPENING

    Exterior Interior Exterior Interior Exterior Interior Height Width

    Ft. in. 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

    Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362

    TARE WEIGHT PAYLOAD GROSS WEIGHT CUBIC CAPACITY

    Lbs. 2,000 9,200 11,200 220 Cu. Ft.

    Kgs. 907 4,173 5,080 6.22 Cu. M.

    FEATURES• Standard Quadcon Type 2 (Part #: SB812) with swing

    doors on two sides• Patented adaptor plate system on one side which

    provides a method to mount any Quadcon Size Storage Module

    • Full array of Drawer and Shelf Modules are available to transport and store small,medium and large sized parts

    • Adaptor Plate allows Removable Modules to be easily loaded, unloaded, and moved via forklift

    • Plate features foolproof locking system which ensures that the doors of the container cannot be closed until the shot bolt mechanism is engaged correctly into the Removable Module

    • Adaptor plate incorporates location and guide features to ensure that the Removable Module is in the correct position for transportation, eliminating the need for blocking and bracing

    • In a matter of minutes, the Removable Modules are loaded, locked down and the container doors closed and ready for quick, product-safe deployment

    • Standard Green

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    812.ST.A

    PQ

    RD

    .DLA

    • 051713-R00

    Quadcon (Type 2) w

    ith Adaptor Plate B

    oth Sides

    Quadcon (Type 2) with Adaptor Plate Both Sides

    Adaptor Plate shown above

    SB812LENGTH HEIGHT WIDTH DOOR OPENING

    Exterior Interior Exterior Interior Exterior Interior Height Width

    Ft. in. 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

    Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362

    TARE WEIGHT PAYLOAD GROSS WEIGHT CUBIC CAPACITY

    Lbs. 2,000 9,200 11,200 220 Cu. Ft.

    Kgs. 907 4,173 5,080 6.22 Cu. M.

    FEATURES• Standard Quadcon with (1) double swing doors on one side

    and (1) Roll Door on one side• Patented adaptor plate system on one side which

    provides a method to mount any Quadcon Size Storage Module

    • Full array of Drawer and Shelf Modules are available to transport and store small,medium and large sized parts

    • Adaptor Plate allows Removable Modules to be easily loaded, unloaded, and moved via forklift

    • Plate features foolproof locking system which ensures that the doors of the container cannot be closed until the shot bolt mechanism is engaged correctly into the Removable Module

    • Adaptor plate incorporates location and guide features to ensure that the Removable Module is in the correct position for transportation, eliminating the need for blocking and bracing

    • In a matter of minutes, the Removable Modules are loaded, locked down and the container doors closed and ready for quick, product-safe deployment

    • Roll Door opening size: 1.363mm Wide x 1,748 mm High• Standard Tan

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    812.SG

    .AP

    QR

    D.D

    LA

    • 051713-R00

    Quadcon (Type 2) w

    ith Adaptor Plate B

    oth Sides

    Quadcon (Type 2) with Adaptor Plate Both Sides

    Adaptor Plate shown above

    SB812LENGTH HEIGHT WIDTH DOOR OPENING

    Exterior Interior Exterior Interior Exterior Interior Height Width

    Ft. in. 4’ 9 7/16” 4’ 7 3/4” 6’ 10” 6’ 3 1/16” 8’ 0” 7’ 6 9/16” 5’ 11 3/16” 4’ 5 5/8”

    Metric 1,459 1,417 2,083 1,907 2,438 2,300 1,808 1,362

    TARE WEIGHT PAYLOAD GROSS WEIGHT CUBIC CAPACITY

    Lbs. 2,000 9,200 11,200 220 Cu. Ft.

    Kgs. 907 4,173 5,080 6.22 Cu. M.

    FEATURES• Standard Quadcon with (1) double swing doors on one side

    and (1) Roll Door on one side• Patented adaptor plate system on both sides which

    provides a method to mount any Quadcon Size Storage Module

    • Full array of Drawer and Shelf Modules are available to transport and store small,medium and large sized parts

    • Adaptor Plate allows Removable Modules to be easily loaded, unloaded, and moved via forklift

    • Plate features foolproof locking system which ensures that the doors of the container cannot be closed until the shot bolt mechanism is engaged correctly into the Removable Module

    • Adaptor plate incorporates location and guide features to ensure that the Removable Module is in the correct position for transportation, eliminating the need for blocking and bracing

    • In a matter of minutes, the Removable Modules are loaded, locked down and the container doors closed and ready for quick, product-safe deployment

    • Roll Door opening size: 1.363mm Wide x 1,748 mm High• Standard Green

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QD

    U-1.D

    LA

    • 051713-R00

    Quadcon D

    rawer M

    odule 1

    Quadcon Drawer Module 1

    Quadcon Drawer Module 1

    Drawer on SuperGlide 500 Glide

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 112 132 170

    MODULE FEATURES• Removable and transportable unit designed for efficient

    storage and transport of small and medium sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon 6’ 10” High with Adaptor Plate (PN# SB812.ST.APTQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate (PN # SB3453.APQ.DLA) for transport

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock drawers and shelves during deployment and to improve theft and pilferage protection while in transport mode and at point of use

    • Module has a four point lock down security system• Low profile base for maximum storage capacity• Three Year WarrantyDRAWER FEATURES• Module includes: (2) 11.2” Drawers, (2) 8” Drawers and

    (2) 4.7” Drawers• All Drawers are 43” Wide• All drawers have 350 lb capacity and include partitioning

    kits which can be repositioned to adjust to load requirements

    • Drawer are mounted on rails with the patented SuperGlide 500 which is a self-lubricating, self-cleaning system that is resistant to dust, rust, sand and dirt

    • SuperGlide 500 system is long-lasting and virtually maintenance-free because it has no rotating parts that could wear out over time

    • Drawers extend out 100% for easy access to all stored items

    Gross Weight Capacity

    1,044 lbs. 3,000 lbs.

    474 kg. 1,361 kg.

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QD

    U-2.D

    LA

    • 051713-R00

    Quadcon D

    rawer M

    odule 1

    Quadcon Drawer Module 2

    Qudadcon Drawer Module 2

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 112 132 170

    MODULE FEATURES• Removable and transportable unit designed for efficient

    storage and transport of small and medium sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon 6’ 10” High with Adaptor Plate (PN# SB812.ST.APTQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate (PN # SB3453.APQ.DLA) for transport

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock drawers and shelves during deployment and to improve theft and pilferage protection while in transport mode and at point of use

    • Module has a four point lock down security system• Low profile base for maximum storage capacity• Three Year WarrantyDRAWER FEATURES• Module includes: (4) 8” Drawers and (3) 4.7” Drawers• All Drawers are 43” Wide• All drawers have 350 lb capacity and include partitioning

    kits which can be repositioned to adjust to load requirements

    • Drawer are mounted on rails with the patented SuperGlide 500 which is a self-lubricating, self-cleaning system that is resistant to dust, rust, sand and dirt

    • SuperGlide 500 system is long-lasting and virtually maintenance-free because it has no rotating parts that could wear out over time

    • Drawers extend out 100% for easy access to all stored items

    Gross Weight Capacity

    1,425 lbs. 3,500 lbs.

    646 kg. 1,588 kg.

    Drawer on SuperGlide 500 Glide

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QD

    U-3.D

    LA

    • 051713-R00

    Quadcon D

    rawer M

    odule 1

    Quadcon Drawer Module 3

    Quadcon Drawer Module 3

    Drawer on SuperGlide 500 Glide

    MODULE FEATURES• Removable and transportable unit designed for efficient

    storage and transport of small and medium sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon 6’ 10” High with Adaptor Plate (PN# SB812.ST.APTQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate (PN # SB3453.APQ.DLA) for transport

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock drawers and shelves during deployment and to improve theft and pilferage protection while in transport mode and at point of use

    • Module has a four point lock down security system• Low profile base for maximum storage capacity• Three Year WarrantyDRAWER FEATURES• Module includes: (2) 8” Drawers, (4) 4.7” Drawers and

    (1) 11.2” Drawer• All Drawers are 43” Wide• All drawers have 350 lb capacity and include partitioning

    kits which can be repositioned to adjust to load requirements

    • Drawer are mounted on rails with the patented SuperGlide 500 which is a self-lubricating, self-cleaning system that is resistant to dust, rust, sand and dirt

    • SuperGlide 500 system is long-lasting and virtually maintenance-free because it has no rotating parts that could wear out over time

    • Drawers extend out 100% for easy access to all stored items

    Gross Weight Capacity

    1,508 lbs. 3,500 lbs.

    684 kg. 1,588 kg.

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 112 132 170

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QD

    U-4.D

    LA

    • 051713-R00

    Quadcon D

    rawer M

    odule 1

    Quadcon Drawer Module 4

    Quadcon Drawer Module 4

    Drawer on SuperGlide 500 Glide

    MODULE FEATURES• Removable and transportable unit designed for efficient

    storage and transport of small and medium sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon 6’ 10” High with Adaptor Plate (PN# SB812.ST.APTQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate (PN # SB3453.APQ.DLA) for transport

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock drawers and shelves during deployment and to improve theft and pilferage protection while in transport mode and at point of use

    • Module has a four point lock down security system• Low profile base for maximum storage capacity• Three Year WarrantyDRAWER FEATURES• Module includes: (2) 11.2” Drawers, (2) 4.7” Drawers and

    (2) 8” Drawers• All Drawers are 43” Wide• All drawers have 350 lb capacity and include partitioning

    kits which can be repositioned to adjust to load requirements

    • Drawer are mounted on rails with the patented SuperGlide 500 which is a self-lubricating, self-cleaning system that is resistant to dust, rust, sand and dirt

    • SuperGlide 500 system is long-lasting and virtually maintenance-free because it has no rotating parts that could wear out over time

    • Drawers extend out 100% for easy access to all stored items

    Gross Weight Capacity

    1,320 lbs. 3,000 lbs.

    599 kg. 1,361 kg.

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 112 132 170

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QD

    U-5.D

    LA

    • 051713-R00

    Quadcon D

    rawer M

    odule 1

    Quadcon Drawer Module 5

    Quadcon Drawer Module 5

    Drawer on SuperGlide 500 Glide

    MODULE FEATURES• Removable and transportable unit designed for efficient

    storage and transport of small and medium sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon 6’ 10” High with Adaptor Plate (PN# SB812.ST.APTQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate (PN # SB3453.APQ.DLA) for transport

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock drawers and shelves during deployment and to improve theft and pilferage protection while in transport mode and at point of use

    • Module has a four point lock down security system• Low profile base for maximum storage capacity• Three Year WarrantyDRAWER FEATURES• Module includes: (4) 11.2” Drawers and (1) 4.7” Drawer• All Drawers are 43” Wide• All drawers have 350 lb capacity and include partitioning

    kits which can be repositioned to adjust to load requirements

    • Drawer are mounted on rails with the patented SuperGlide 500 which is a self-lubricating, self-cleaning system that is resistant to dust, rust, sand and dirt

    • SuperGlide 500 system is long-lasting and virtually maintenance-free because it has no rotating parts that could wear out over time

    • Drawers extend out 100% for easy access to all stored items

    Gross Weight Capacity

    1,036 lbs. 2,500 lbs.

    469 kg. 1,814 kg.

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 112 132 170

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QW

    DU

    -1.DLA

    • 051713-R00

    Quadcon W

    eatherproof Draw

    er Module 1

    Quadcon Weatherproof DrawerModule 1

    Weatherproof Drawer Module 1

    Weatherproof drawers

    Drawer on SuperGlide 500 Glide

    MODULE FEATURES• Removable and transportable unit designed for efficient

    storage and transport of small and medium sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon 6’ 10” High with Adaptor Plate (PN# SB812.ST.APTQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate (PN # SB3453.APQ.DLA) for transport

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock drawers and shelves during deployment and to improve theft and pilferage protection while in transport mode and at point of use

    • Module has a four point lock down security system• Low profile base for maximum storage capacity• Three Year WarrantyDRAWER FEATURES• Module includes: (2) 11.2” Weatherproof Drawers,

    (2) 8” Weatherproof Drawers and (2) 4.7” Weatherproof Drawers

    • All Drawers are 43” Wide• All drawers have 350 lb capacity and include partitioning

    kits which can be repositioned to adjust to load requirements

    • Drawer are mounted on rails with the patented SuperGlide 500 which is a self-lubricating, self-cleaning system that is resistant to dust, rust, sand and dirt

    • SuperGlide 500 system is long-lasting and virtually maintenance-free because it has no rotating parts that could wear out over time

    • Drawers extend out 100% for easy access to all stored items

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 112 132 170

    Gross Weight Capacity

    1,044 lbs. 3,000 lbs.

    474 kg. 1,361 kg.

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QW

    DU

    -2.DLA

    • 051713-R00

    Quadcon W

    eatherproof Draw

    er Module 1

    Quadcon Weatherproof DrawerModule 2

    Weatherproof Drawer Module 2

    Weatherproof drawers

    MODULE FEATURES• Removable and transportable unit designed for efficient

    storage and transport of small and medium sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon 6’ 10” High with Adaptor Plate (PN# SB812.ST.APTQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate (PN # SB3453.APQ.DLA) for transport

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock drawers and shelves during deployment and to improve theft and pilferage protection while in transport mode and at point of use

    • Module has a four point lock down security system• Low profile base for maximum storage capacity• Three Year WarrantyDRAWER FEATURES• Module includes: (4) 8” Weatherproof Drawers and

    (3) 4.7” Weatherproof Drawers• All Drawers are 43” Wide• All drawers have 350 lb capacity and include partitioning

    kits which can be repositioned to adjust to load requirements

    • Drawer are mounted on rails with the patented SuperGlide 500 which is a self-lubricating, self-cleaning system that is resistant to dust, rust, sand and dirt

    • SuperGlide 500 system is long-lasting and virtually maintenance-free because it has no rotating parts that could wear out over time

    • Drawers extend out 100% for easy access to all stored items

    Drawer on SuperGlide 500 Glide

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 112 132 170

    Gross Weight Capacity

    1,425 lbs. 3,500 lbs.

    646 kg. 1,588 kg.

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QW

    DU

    -3.DLA

    • 051713-R00

    Quadcon W

    eatherproof Draw

    er Module 1

    Quadcon Weatherproof DrawerModule 3

    Weatherproof Drawer Module 3

    Weatherproof drawers

    MODULE FEATURES• Removable and transportable unit designed for efficient

    storage and transport of small and medium sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon 6’ 10” High with Adaptor Plate (PN# SB812.ST.APTQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate (PN # SB3453.APQ.DLA) for transport

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock drawers and shelves during deployment and to improve theft and pilferage protection while in transport mode and at point of use

    • Module has a four point lock down security system• Low profile base for maximum storage capacity• Three Year WarrantyDRAWER FEATURES• Module includes: (2) 8” Weatherproof Drawers,

    (4) 4.7” Weatherproof Drawers and (1) 11.2” Weatherproof Drawer

    • All Drawers are 43” Wide• All drawers have 350 lb capacity and include partitioning

    kits which can be repositioned to adjust to load requirements

    • Drawer are mounted on rails with the patented SuperGlide 500 which is a self-lubricating, self-cleaning system that is resistant to dust, rust, sand and dirt

    • SuperGlide 500 system is long-lasting and virtually maintenance-free because it has no rotating parts that could wear out over time

    • Drawers extend out 100% for easy access to all stored items

    Drawer on SuperGlide 500 GlideGross Weight Capacity

    1,508 lbs. 3,500 lbs.

    684 kg. 1,588 kg.

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 112 132 170

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QW

    DU

    -4.DLA

    • 051713-R00

    Quadcon W

    eatherproof Draw

    er Module 1

    Quadcon Weatherproof DrawerModule 4

    Weatherproof Drawer Module 4

    Weatherproof drawers

    Drawer on SuperGlide 500 Glide

    MODULE FEATURES• Removable and transportable unit designed for efficient

    storage and transport of small and medium sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon 6’ 10” High with Adaptor Plate (PN# SB812.ST.APTQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate (PN # SB3453.APQ.DLA) for transport

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock drawers and shelves during deployment and to improve theft and pilferage protection while in transport mode and at point of use

    • Module has a four point lock down security system• Low profile base for maximum storage capacity• Three Year WarrantyDRAWER FEATURES• Module includes: (2) 11.2” Weatherproof Drawers,

    (2) 4.7” Weatherproof Drawers and (2) 8” Weatherproof Drawers

    • All Drawers are 43” Wide• All drawers have 350 lb capacity and include partitioning

    kits which can be repositioned to adjust to load requirements

    • Drawer are mounted on rails with the patented SuperGlide 500 which is a self-lubricating, self-cleaning system that is resistant to dust, rust, sand and dirt

    • SuperGlide 500 system is long-lasting and virtually maintenance-free because it has no rotating parts that could wear out over time

    • Drawers extend out 100% for easy access to all stored items

    Gross Weight Capacity

    1,320 lbs. 3,000 lbs.

    599 kg. 1,361 kg.

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 112 132 170

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QW

    DU

    -5.DLA

    • 051713-R00

    Quadcon W

    eatherproof Draw

    er Module 1

    Quadcon Weatherproof DrawerModule 5

    Weatherproof Drawer Module 5

    Weatherproof drawers

    Drawer on SuperGlide 500 Glide

    MODULE FEATURES• Removable and transportable unit designed for efficient

    storage and transport of small and medium sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon 6’ 10” High with Adaptor Plate (PN# SB812.ST.APTQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate (PN # SB3453.APQ.DLA) for transport

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock drawers and shelves during deployment and to improve theft and pilferage protection while in transport mode and at point of use

    • Module has a four point lock down security system• Low profile base for maximum storage capacity• Three Year WarrantyDRAWER FEATURES• Module includes: (4) 11.2” Weatherproof Drawers and

    (1) 4.7” Weatherproof Drawer• All Drawers are 43” Wide• All drawers have 350 lb capacity and include partitioning

    kits which can be repositioned to adjust to load requirements

    • Drawer are mounted on rails with the patented SuperGlide 500 which is a self-lubricating, self-cleaning system that is resistant to dust, rust, sand and dirt

    • SuperGlide 500 system is long-lasting and virtually maintenance-free because it has no rotating parts that could wear out over time

    • Drawers extend out 100% for easy access to all stored items

    Gross Weight Capacity

    1,036 lbs. 2,500 lbs.

    469 kg. 1,814 kg.

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 112 132 170

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QS

    U-1.D

    LA

    • 051713-R00

    Quadcon StackaB

    ox™ M

    odule 1

    Quadcon StackaBox™Module 1

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 112 132 170

    StackaBox Module 1

    MODULE FEATURES• Unique Stackaboxes allow all individual drawers to be

    removed from the module and hand-carried to point of use• Removable and transportable unit designed for efficient

    storage and transport of small and medium sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon with Adaptor Plate (PN# SB812.0.ST.APQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate for transport

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock drawers and shelves during deployment and to improve theft and pilferage protection while in transport mode and at point of use

    • Module has a two point lock down security system• Low profile base for maximum storage capacity• Three Year WarrantyDRAWER FEATURES• Module includes: (1) 15” + 27” with Slide-Out Bulk Tray

    and net, (3) 15” + 27” with 4.7”H StackaBoxes, (1) 15” + 27” with 11.2”H StackaBoxes and (1) 15” + 27” with 14.5”H StackaBoxes

    • All StackaBoxes have weatherproof, lockable lids which are self-supporting with gas struts and can withstand wind gusts up to 40mph

    • StackaBoxes have a 350 lb capacity and include partitioning kits which can be repositioned to adjust to load requirements

    • All StackaBoxes have handles to allow for easy removal and manual transport

    • StackaBoxes securely lock into the SuperGlide 500 rail system, which is a patented, self-lubricating, self-cleaning system that is resistant to dust, rust, sand and dirt

    • SuperGlide 500 system has no rotating parts which could wear over time making it long-lasting and virtually maintenance-free

    StackaBox Module

    Gross Weight Capacity

    1,612 lbs. 6,000 lbs.

    731 kg. 2,722 kg.

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QS

    U-2.D

    LA

    • 051713-R00

    Quadcon StackaB

    ox™ M

    odule 2

    Quadcon StackaBox™Module 2

    StackaBox Module 2

    MODULE FEATURES• Unique Stackaboxes allow all individual drawers to be

    removed from the module and hand-carried to point of use• Removable and transportable unit designed for efficient

    storage and transport of small and medium sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon with Adaptor Plate (PN# SB812.0.ST.APQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate for transport

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock drawers and shelves during deployment and to improve theft and pilferage protection while in transport mode and at point of use

    • Module has a two point lock down security system• Low profile base for maximum storage capacity• Three Year WarrantyDRAWER FEATURES• Module includes: (1) 15” _ 27” with Slide-Out Bulk Tray and

    net and (5) 15” + 27” with 8”H StackaBoxes• All StackaBoxes have weatherproof, lockable lids which

    are self-supporting with gas struts and can withstand wind gusts up to 40mph

    • StackaBoxes have a 350 lb capacity and include partitioning kits which can be repositioned to adjust to load requirements

    • All StackaBoxes have handles to allow for easy removal and manual transport

    • StackaBoxes securely lock into the SuperGlide 500 rail system, which is a patented, self-lubricating, self-cleaning system that is resistant to dust, rust, sand and dirt

    • SuperGlide 500 system has no rotating parts which could wear over time making it long-lasting and virtually maintenance-free

    StackaBox Module

    Gross Weight Capacity

    1,699 lbs. 6,000 lbs.

    757 kg. 2,722 kg.

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 112 132 170

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QS

    U-3.D

    LA

    • 051713-R00

    Quadcon StackaB

    ox™ M

    odule 3

    Quadcon StackaBox™Module 3

    StackaBox Module

    MODULE FEATURES• Unique Stackaboxes allow all individual drawers to be

    removed from the module and hand-carried to point of use• Removable and transportable unit designed for efficient

    storage and transport of small and medium sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon with Adaptor Plate (PN# SB812.0.ST.APQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate for transport

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock drawers and shelves during deployment and to improve theft and pilferage protection while in transport mode and at point of use

    • Module has a two point lock down security system• Low profile base for maximum storage capacity• Three Year WarrantyDRAWER FEATURES• Module includes: (1) 15” + 27” with Slide-Out Bulk Tray and

    net, and (3) 15” + 27” with 14.5”H StackaBoxes• All StackaBoxes have weatherproof, lockable lids which

    are self-supporting with gas struts and can withstand wind gusts up to 40mph

    • StackaBoxes have a 350 lb capacity and include partitioning kits which can be repositioned to adjust to load requirements

    • All StackaBoxes have handles to allow for easy removal and manual transport

    • StackaBoxes securely lock into the SuperGlide 500 rail system, which is a patented, self-lubricating, self-cleaning system that is resistant to dust, rust, sand and dirt

    • SuperGlide 500 system has no rotating parts which could wear over time making it long-lasting and virtually maintenance-free

    StackaBox Module

    Gross Weight Capacity

    1,342 lbs. 4,000lbs.

    609 kg. 1,814 kg.

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 112 132 170

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QS

    U-4.D

    LA

    • 051713-R00

    Quadcon StackaB

    ox™ M

    odule 4

    Quadcon StackaBox™Module 4

    StackaBox Module 4

    MODULE FEATURES• Unique Stackaboxes allow all individual drawers to be

    removed from the module and hand-carried to point of use• Removable and transportable unit designed for efficient

    storage and transport of small and medium sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon with Adaptor Plate (PN# SB812.0.ST.APQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate for transport

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock drawers and shelves during deployment and to improve theft and pilferage protection while in transport mode and at point of use

    • Module has a two point lock down security system• Low profile base for maximum storage capacity• Three Year WarrantyDRAWER FEATURES• Module includes: (5) 15” + 27” with 4.7”H StackaBoxes and

    (2) 15” + 27” with 11.2”H StackaBoxes• All StackaBoxes have weatherproof, lockable lids which

    are self-supporting with gas struts and can withstand wind gusts up to 40mph

    • StackaBoxes have a 350 lb capacity and include partitioning kits which can be repositioned to adjust to load requirements

    • All StackaBoxes have handles to allow for easy removal and manual transport

    • StackaBoxes securely lock into the SuperGlide 500 rail system, which is a patented, self-lubricating, self-cleaning system that is resistant to dust, rust, sand and dirt

    • SuperGlide 500 system has no rotating parts which could wear over time making it long-lasting and virtually maintenance-free

    StackaBox Module

    Gross Weight Capacity

    1,758lbs. 7,000lbs.

    797 kg. 3,175 kg.

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 112 132 170

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QS

    U-5.D

    LA

    • 051713-R00

    Quadcon StackaB

    ox™ M

    odule 5

    Quadcon StackaBox™Module 5

    StackaBox Module 5

    MODULE FEATURES• Unique Stackaboxes allow all individual drawers to be

    removed from the module and hand-carried to point of use• Removable and transportable unit designed for efficient

    storage and transport of small and medium sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon with Adaptor Plate (PN# SB812.0.ST.APQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate for transport

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock drawers and shelves during deployment and to improve theft and pilferage protection while in transport mode and at point of use

    • Module has a two point lock down security system• Low profile base for maximum storage capacity• Three Year WarrantyDRAWER FEATURES• Module includes: (3) 15” + 27” with 17.5”H StackaBoxes• All StackaBoxes have weatherproof, lockable lids which

    are self-supporting with gas struts and can withstand wind gusts up to 40mph

    • StackaBoxes have a 350 lb capacity and include partitioning kits which can be repositioned to adjust to load requirements

    • All StackaBoxes have handles to allow for easy removal and manual transport

    • StackaBoxes securely lock into the SuperGlide 500 rail system, which is a patented, self-lubricating, self-cleaning system that is resistant to dust, rust, sand and dirt

    • SuperGlide 500 system has no rotating parts which could wear over time making it long-lasting and virtually maintenance-free

    StackaBox Module

    Gross Weight Capacity

    1,177lbs. 3,000lbs.

    534 kg. 1,361 kg.

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 112 132 170

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QG

    O-1.D

    LA

    • 051713-R00

    Quadcon G

    lide-Out M

    odule 1

    Quadcon Glide-OutModule 1

    MODULE FEATURES• Removable and transportable unit designed for efficient

    storage and transport of medium and large sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon 6’ 10” High with Adaptor Plate (PN# SB812.APTQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate (PN # SB3453.APQ.DLA) for transport.

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock shelves during deployment

    • Module has a four point lock down security system.• Low profile base for maximum storage capacity• Three Year WarrantySHELF FEATURES• Module includes (2) Rack International Glide-Out® Shelves

    with Standard Tray (1.5” Lip) • Each shelf extends out 70% and has a 2,250lbs capacity.• When the shelf is fully retracted into the Glide-Out slide it is

    automatically restrained in all directions. • Glide-Out Shelves can be repositioned and reconfigured as

    mission demands change.

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 111.8 132 107.1

    SHELF SURFACE DIMENSIONS

    Depth Width Height

    In. 40.6 41.4 N/A

    Cm. 103.1 105 N/A

    Glide Out® Module 1

    Gross Weight Capacity

    640 lbs. 4,500 lbs.

    290 kg. 2,041 kg.

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QG

    O-2.D

    LA

    • 051713-R00

    Quadcon G

    lide-Out M

    odule 2

    Quadcon Glide-OutModule 2

    MODULE FEATURES• Removable and transportable unit designed for efficient

    storage and transport of medium and large sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon 6’ 10” High with Adaptor Plate (PN# SB812.APTQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate (PN # SB3453.APQ.DLA) for transport.

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock shelves during deployment

    • Module has a four point lock down security system.• Low profile base for maximum storage capacity• Three Year WarrantySHELF FEATURES• Module includes (3) Rack International Glide-Out® Shelves

    with Standard Tray (1.5” Lip) • Each shelf extends out 70% and has a 2,250lbs capacity.• When the shelf is fully retracted into the Glide-Out slide it is

    automatically restrained in all directions. • Glide-Out Shelves can be repositioned and reconfigured as

    mission demands change.

    Glide Out® Module 2

    Gross Weight Capacity

    745 lbs. 6,750 lbs.

    338 kg. 3,062 kg.

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 111.8 132 107.1

    SHELF SURFACE DIMENSIONS

    Depth Width Height

    In. 40.6 41.4 N/A

    Cm. 103.1 105 N/A

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QG

    O-3.D

    LA

    • 051713-R00

    Quadcon G

    lide-Out M

    odule 3

    Quadcon Glide-OutModule 3

    MODULE FEATURES• Removable and transportable unit designed for efficient

    storage and transport of medium and large sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon 6’ 10” High with Adaptor Plate (PN# SB812.APTQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate (PN # SB3453.APQ.DLA) for transport.

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock shelves during deployment

    • Module has a four point lock down security system.• Low profile base for maximum storage capacity• Three Year WarrantySHELF FEATURES• Module includes (2) Rack International Glide-Out® Shelves

    with Battery Tray (3.4” Lips with polymer insert) • Each shelf extends out 70% and has a 2,250lbs capacity.• When the shelf is fully retracted into the Glide-Out slide it is

    automatically restrained in all directions. • Glide-Out Shelves can be repositioned and reconfigured as

    mission demands change.

    Glide Out® Module 3

    Gross Weight Capacity

    762 lbs. 4,500 lbs.

    346 kg. 2,041 kg.

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 111.8 132 107.1

    SHELF SURFACE DIMENSIONS

    Depth Width Height

    In. 40.6 41.4 N/A

    Cm. 103.1 105 N/A

  • R

    1 Sea Box Drive, East Riverton, NJ 08077-2004 | Phone: 856 . 303 . 1101 | Fax: 856 . 303 . 1501 | Email: [email protected] www.seabox.com

    ALL DIMENSIONS AND WEIGHTS ARE NOMINAL AND SUBJECT TO MINOR VARIATIONS THAT MAY OCCUR DURING THE MANUFACTURING PROCESS

    CERTIFIED QUALITYMANAGEMENT SYSTEM

    ISO 9001:2008ALL NEW CONTAINERS ARE MANUFACTURED TO THE LATEST ISO STANDARD

    SB

    3453.QG

    O-4.D

    LA

    • 051713-R00

    Quadcon G

    lide-Out M

    odule 4

    Quadcon Glide-OutModule 4

    MODULE FEATURES• Removable and transportable unit designed for efficient

    storage and transport of medium and large sized items• Full-Width Module with forklift pockets fits inside one side

    of a standard ISO Quadcon 6’ 10” High with Adaptor Plate (PN# SB812.APTQ1.DLA)

    • Module can be loaded into a container by a forklift and securely locked to the floor via Adaptor Plate (PN # SB3453.APQ.DLA) for transport.

    • Module is easily removed from container and can be utilized in workshops, stores, maintenance shops or a warehouse on a daily basis, then replenished or re-set and returned to the container where it is securely locked down and ready for deployment.

    • Fitted with full-height “Lockable Gates” used to lock shelves during deployment

    • Module has a four point lock down security system.• Low profile base for maximum storage capacity• Three Year WarrantySHELF FEATURES• Module includes (3) Rack International Glide-Out® Shelves

    with Battery Trays (3.4” Lip with polymer insert) • Each shelf extends out 70% and has a 2,250lbs capacity.• When the shelf is fully retracted into the Glide-Out slide it is

    automatically restrained in all directions. • Glide-Out Shelves can be repositioned and reconfigured as

    mission demands change.

    Glide Out® Module 4

    Gross Weight Capacity

    745 lbs. 6,750 lbs.

    338 kg. 3,062 kg.

    MODULE DIMENSIONS

    Depth Width Height

    In. 44 52 67

    Cm. 111.8 132 107.1

    SHELF SURFACE DIMENSIONS

    Depth Width Height

    In. 40.6 41.4 N/A

    Cm. 103.1 105 N/A

  • Quadcon Enhanced Containers and ModulesENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_01ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_02ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_03ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_04ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_05ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_06ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_07ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_08ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_09ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_10ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_11ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_12ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_13ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_14ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_15ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_16ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_17SB812.ST.APQ1.DLASB812.SG.APQ1.DLASB812.ST.APQ2.DLASB812.SG.APQ2.DLASB812.ST.APQRD.DLASB812.SG.APQRD.DLASB3453.QDU-1.DLASB3453.QDU-2.DLASB3453.QDU-3.DLASB3453.QDU-4.DLASB3453.QDU-5.DLASB3453.QWDU-1.DLASB3453.QWDU-2.DLASB3453.QWDU-3.DLASB3453.QWDU-4.DLASB3453.QWDU-5.DLASB3453.QSU-1.DLASB3453.QSU-2.DLASB3453.QSU-3.DLASB3453.QSU-4.DLASB3453.QSU-5.DLASB3453.QGO-1.DLASB3453.QGO-2.DLASB3453.QGO-3.DLASB3453.QGO-4.DLA

    ENHANCED CONTAINER SYSTEMS CATALOG_rev1_Page_36