SANDVIK'S COMPACT

RANGE....................

1

Sandvik breakers Parts and tools

2

Parts and tools

Sandvik Mining and Construction recognises that all our breakers and

attachments are only ever as good as the parts and tools they use.

Which is why our genuine parts and tools utilize the best raw materials

and heat treatment characteristics to ensure optimum durability across a

broad range of industries, materials and applications.

These parts and tools are available through a highly experienced global

dealer network that is unparalleled within our industry and which

ensures that you get the right tool, in the right place, at the right time.

The sandvik tools offering comprises the chisel and moil point

tools that are suitable for most jobs.

In trenching, benching and demolition applications, the material is

broken by a combination of impact energy and a wedging effect that

forces the material to separate as the tool penetrates. The chisel is the

preferred choice among professionals in some trenching applications;

whereas the moil point is recommended as it causes less burring in the

tool retainer pin area.

Limestone chisel and pyramid tools are also suitable for trenching,

Benching and demolition. Limestone chisel increases production where

the penetration rate is high. Pyramid tool is particularly effective in

concrete.

Blunt tools and super blunt tools are suitable for secondary breaking

and boulder reduction applications. The tool breaks the material with

stress waves generated by the hammer, passing through the tool and into

the rock. The standard blunt tool provides an excellent combination of

productivity and resistance to wear. For additional wear resistance in

Particularly abrasive conditions, a super blunt tool may be specified.

Hard rock chisel is designed for primary breaking of hard rock;

Quarrying and trenching in hard, abrasive, fractured rock.

Asphalt cutting and compacting tools are designed for utility

Applications. Sandvik's asphalt cutting tool is available with both

parallel and transverse cutting edge directions.

For more information about Sandvik's range of parts and tools please

Refer to the sandvik tools brochure, or contact your nearest dealer.

3

Sandvik breakers BC Multiprocessor range

4

BC multiprocessor range

The Sandvik BC multiprocessor is

designed to perform a broad array of

duties. Engineered for both primary and

secondary applications, these models are

suitable for crushing concrete, cutting

reinforced structures, pulverizing and

demolition.

D-jaws:

•Basic jaw for primary and secondary

processing of concrete.

•Maximum power and excellent power-

to-weight ratio.

•Replaceable wear parts.

•Numerous teeth options for demolition,

wood cutting, etc.

S-jaws:

•Specialist jaw for demolition of steel

reinforced concrete structures.

•Front teeth crush concrete; cutting blades

slice through steel rebar.

•Interchangeable blades ensure optimum

productivity.

A-jaws:

•Wider opening jaw adds versatility while

non-bolted teeth design provides even

more solid build.

•Designed to meet demand for wider jaw

opening.

•Wide opening inner teeth can crack

concrete.

M-jaws:

•Designed for steel demolition and

occasional scrap splitting applications.

•Beak shape jaw tip punches plates

making it possible to tear down steel

structures and welded beams.

BC807 BC1515 BC2019 BC2525 BC3032

Weight, kg 592 1600 2350 2790 3300

Carrier Weight, t 6-10 10-18 16-25 22-35 28-35

Operating Pressure, bar 320 320 320 350 320

Operating Flow, l/min 150 230 230 230 280

Jaw Cycle Speed (Open and Close), sec 2.5 2.5 4.2 4.7 4.6

Jaw Closing Speed, sec 1.5 1.4 2.1 2.3 2.5

Rotation 360 (Degrees) Standard Mechanical

Hydraulic (Optional)

Standard Mechanical

Hydraulic (Optional)

Standard Mechanical

Hydraulic (Optional)

Standard Mechanical

Hydraulic (Optional)

Standard Mechanical

Hydraulic (Optional)

Max Pressure for Hydraulic Rotation, bar 120 120 120 120 120

Oil Flow for Hydraulic Rotation, l/min 30 30 30 30 30

5

Sandvik breakers BC Cutter-crusher range

6

BC cutter-crusher range

The Sandvik BC Cutter-Crusher Range

features three models all of which deliver

a class leading power to weight ratio.

BC504 and BC706 with their lightweight

design can be mounted on carriers from

2.5 tons up to 9 tons, and the BC2022 is

the number one choice for carriers

between 20 and 40 tons.

Featuring optimised tooth design and

wide jaw opening for better productivity,

the BC Cutter-Crusher features extremely

powerful jaws, long cutting blades,

backed by a hard facing for an all round

robust design.

360˚ power rotation (optional) allows

for easier positioning, whilst the centre

mounted cylinder provides constant

cutting force throughout the working

cycle. The long replaceable cutting

blades make short work out of cutting

metal.

The BC cutter-crusher models are an

efficient alternative to other demolition

methods and are ideally suited to

environmentally sensitive applications

where low vibration, noise and dust are of

concern.

BC504 BC706 BC2022

Weight, kg 205 355 2300

Carrier Weight, t 2.5-6 4-9 20-40

Maximum Jaw Opening, mm 312 400 720

Crushing Force, kN 460 750 1600

Crushing Force (Tip), kN 180 240 700

Operating Pressure, bar 250 250 320

Operating Flow, l/min 40 60 180

Steel Cutting Blade Length, mm 100 200 400

Overall Length, mm 1040 1250 2320

Mounting Options Pin-On, Flat-Top Pin-On, Flat-Top Flat-Top

Rotation 360 (Degrees) Mechanical Standard Mechanical Standard Mechanical Standard

– Hydraulic (Optional) Hydraulic (Optional)

7

Sandvik breakers BP Pulverizer range

8

BP pulverizer range

The Sandvik BP pulverizer range is ideally

suited to a wide range of secondary

demolition and recycling duties. The BP

range models are designed for fast and

effective material separation, a key aspect

of the recycling process.

The broad jaw design of the BP range

pulverizers coupled with their extra wide

jaw opening allows for large amounts

of material to be processed at a time

for maximum productivity. BP3042 is

equipped with a speed valve for higher

production.

Manufactured from wear resistant

steel and a extra hard facing for longer

working life, the BP range pulverizers

feature a protected centre mounted

cylinder that provides a high force level

throughout the working cycle.

Recycling applications

• Separating rebar from concrete.

• Materials segregation.

• Reduce size of blocks for further

processing.

• Sort and load material.

BP2430 BP3240

Weight, kg 1800 3050

Carrier Weight, t 18-28 24-42

Maximum Jaw Opening, mm 870 1155

Crushing Force, kN 1350 2330

Crushing Force (Tip), kN 770 1220

Operating Pressure, bar 320 320

Operating Flow, l/min 180 350

Steel Cutting Blade Length, mm 280 280

Overall Length, mm 2150 2580

Jaw Width, mm 470 520

Speed Valve – Standard

9

Sandvik breakers Booms

10

Breaker Booms

Sandvik's pedestal mounted breaker

booms enable the optimal positioning of

a breaker within a crushers feed, allow-

ing blockages and bridging of rock to be

broken and cleared quickly and efficiently.

Available in a wide range of sizes and

designs, Sandvik breaker booms can be

supplied as complete, perfectly matched

systems including the power pack, control

system and perfectly matched breaker.

Models range from flexible, lightweight

rota-booms to heavy-duty boom systems

with extended reach.

Compact series booms are used on

mobile crushing plants and impact

crushers. They feature a low-profile design

that maintains the crushers low

transportation height.

Light weight, multi-purpose Small series

booms are typically used in quarries,

together with primary crushers or mobile

crushers to clear blockages and bridging.

Medium series booms have been built

to take heavy loads in quarry and mining

applications. Typically installed to

enhance the productivity of stationary

crushers by feeding material to the

crushers and raking the hopper area.

Large series booms are specially

designed for the mining markets.

Applications may include gyratory

crushers in mines and quarries, or

grizzlies. Large booms also feature a

multi-fit pedestal, that makes replacing

existing, worn out boom systems more

convenient.

Mobile breaker systems are specially

designed for mobile underground grizzly

applications. They can easily be installed

on various carriers and make a winning

combination, once teamed up with a

Sandvik medium or large breaker and or

any other compatible Sandvik product

11

www.sandvik.com

Sandvik is a high-technology engineering group with

world-leading positions in selected areas – tools for metal

working, advanced materials technology, and mining and

construction. We are represented in 130 countries.

Sandvik Mining and Construction represents one third of

the overall Sandvik Group and serves a broad range of

customers in construction, mineral exploration, mining

and bulk materials handling. Our construction expertise

covers quarrying, tunneling, demolition and recycling, and

other civil engineering applications. Our mining products

and services support customers on the surface and under

ground, in all mineral, coal and metal mining applications

from exploration to ore transportation.

Commitment and Responsibility

Sandvik is committed to improving conditions for people while

minimizing environmental impact. You can see it in everything

we do. From sustainable operations that recycle resources, cut

emissions and save energy. To promoting a strong safety culture,

and supporting local communities with resources and knowledge.

Put simply: Commitment and Responsibility.