samuel h. huang summary - mechanical engineering resume 2015.pdf · environmentally conscious...

1

Samuel H. Huang Professor and Director of Intelligent Systems Laboratory

Department of Mechanical and Materials Engineering University of Cincinnati, Cincinnati, OH 45221

Phone: (513)556-1154 Fax: (513)556-3390 E-mail: [email protected] SUMMARY

• Funding: $2,514,135 as a PI; $958,087 as a Co-PI • Publication: 87 journal papers, 58 conference papers, 2 books, and 3 book chapters • Teaching: graduated 13 Ph.D. and 40 M.S. students; professor rating 4.4 out of 5 • Journal editorships: Advisory Board, International Journal of Advanced Manufacturing

Technology; Editorial Board, International Journal of Industrial and Systems Engineering, Recent Patents on Computer Science, Applied Computational Intelligence and Soft Computing

• Interdisciplinary collaboration with faculty from Medicine, Pharmacy, Business Administration, Education, and Engineering

EDUCATION Ph.D., 1995, Texas Tech University, Major in Industrial Engineering, Minor in Computer Science Thesis: A Graph-Matrix Approach for Setup Planning in Computer-Aided Process Planning (CAPP) M.S., 1992, Texas Tech University, Major in Industrial Engineering Thesis: Decision Making Model for Integration of Process Planning and Scheduling B.S., 1991, Zhejiang University, P. R. China, Major in Instrument Engineering Senior Project: Stage Sound-Light Control System EXPERIENCE

Professor Department of Mechanical and Materials Engineering 09/2007 – present The University of Cincinnati

• Responsible for teaching Mechanical and Industrial Engineering courses, conducting research on service and manufacturing productivity improvement, and supervising graduate and undergraduate students

Graduate Program Industrial Engineering and Mechanical Engineering programs Director The University of Cincinnati 11/2005 – 06/2010 • Responsible for admitting graduate students, awarding university

graduate scholarships and university graduate assistantships, executing and updating graduate program policies, and providing graduate program report

Associate Professor Department of Mechanical, Industrial and Nuclear Engineering 09/2001 – 08/2007 The University of Cincinnati

2

• Responsible for teaching Industrial and Manufacturing Engineering courses, conducting research on manufacturing and service productivity improvement, developing on-line learning courses, and supervising graduate and undergraduate students

Assistant Professor Department of Mechanical, Industrial and Manufacturing 01/1998 – 08/2001 Engineering, The University of Toledo

• Responsible for teaching Industrial and Manufacturing Engineering courses, conducting research on intelligent and integrated manufacturing, developing research and instructional laboratory, and supervising graduate and undergraduate students

Systems Engineer Computer-Aided Manufacturing, EDS/Unigraphics (now Siemens 08/1996 – 12/1997 PLM Software)

• Responsible for research, development, and maintenance of the Unigraphics CAD/CAM software package and providing technical support for the users of Unigraphics

• Managed several projects on CAM functionality improvement for the Unigraphics software package

Research Associate Department of Industrial Engineering, Texas Tech University 12/1995 - 07/1996 • Supervised graduate students and provided written and oral reports of research activities • Performed research on CAD/CAM integration and environmentally conscious design and manufacturing

Research Assistant Department of Industrial Engineering, Texas Tech University 09/1992 - 11/1995 • Performed research on CAD/CAM/CAPP, precision engineering,

application of artificial intelligence (AI) in manufacturing, and environmentally conscious design and manufacturing

• Designed, developed, and tested several prototype software programs based on research results

Student Intern Manufacturing Systems Integration Division, National Institute of Summer 1993 Standards and Technology (NIST)

• Investigated the use of PDES/STEP (ISO 10303-21) to support integrated process planning

TEACHING INTERESTS

Engineering Statistics, Supply Chain Management, Production Planning and Control, Statistical Quality Control, Discrete Event Simulation

RESEARCH AREAS

Big Data Analytics; Supplier-based Manufacturing; Complex Systems Analysis and Optimization

HONORS/AWARDS

Marquis Who’s Who in the World, 2012 SME Robert A. Dougherty Outstanding Young Manufacturing Engineer Award, 2005 ASME MSEC Best Organizer of Symposium & Session Award, 2009

3

Graduate Fellow, University of Cincinnati, 2014 Distinguished Engineering Researcher Award, College of Engineering, University of

Cincinnati, 2007-2008, 2010-2011 Faculty Bonus Award, College of Engineering, University of Cincinnati, 2007 Professor of the Quarter, College of Engineering, University of Cincinnati, Spring 2002 Dean’s Merit Award, College of Engineering, University of Toledo, 2001 PROFESSIONAL SOCIETIES

Alpha Pi Mu, National Industrial Engineering Honor Society Society of Manufacturing Engineers (SME) Institute of Electrical and Electronics Engineering (IEEE) American Society of Engineering Education (ASEE) SPONSORED PROJECTS

NSF (Received As PI): Total $1,295,596 1. “Seamless Transition from Academia to Real-world (STAR): A Collaborative Partnership

to Producing Industry Ready Graduates,” DUE-1141120, 05/12 – 04/15, $199,999. 2. “GOALI: Robust and Efficient Knowledge Discovery With Application in Gene

Expression Based Diagnosis,” CMMI-0825710, 09/08 – 08/12, $374,998. 3. “Condition Monitoring for Evidence-based Care of Psychiatric Patients,” CMMI-0555962,

04/06 – 03/10, $409,314. 4. “A Fully Integrated Corporate Experience Based Manufacturing Education Strategy,”

EEC-0343171, 09/03 – 08/05, $100,000. 5. “Collaborative Research: GOALI: Integrated and Computerized Setup Planning and

Fixture Design,” CMMI-0099735, 09/01 – 08/05, $211,285. Other External (Received As PI): Total $1,031,789

6. “Development of MTConnect Monitoring Capability for Smart Machine Supervisory System,” TechSolve, 04/11 – 11/11, $29,986.

7. “Production Line Construction, PSI (Pre-Start Inspection), and QCV (Quality Confirmation and Validation) Optimization,” Procter & Gamble, 07/09-06/10, $49,998.

8. “Smart Machine Supervisory System,” US Army Benet Laboratories (through TechSolve), 04/09 – 03/11, $110,807.

9. “Pilot Study to Correlate Neuroimaging and PT/OT Outcome Measures in Children with Cerebral Palsy,” Cincinnati Children’s Hospital, 05/09 – 09/09, $5,393.

10. “Model-based Production Line Construction Optimization: Phase III,” Procter & Gamble, 07/08 – 06/09, $70,064.

11. “Model-based Production Line Construction Optimization: Phase II,” Procter & Gamble, 07/07 – 06/08, $69,951.

12. “Data Mining for Predictive Modeling of Business Initiative Success,” Procter & Gamble, 07/07 – 12/07, $29,992.

13. “Operating System Design for Smart Machine Platform,” US Army Benet Laboratories (through TechSolve), 07/06 – 12/08, $123,107.

14. “Model-based Production Line Construction Optimization,” Procter & Gamble, 06/06 – 02/07, $49,960.

4

15. “A Scalable and Adaptive Tool for Rapid Process Modeling,” Ohio Aerospace Institute, 10/03 – 03/05, $73,334.

16. “Intelligent Tool Life Prediction for Turning Process Optimization,” TechSolve, 11/03 – 06/04, $29,999.

17. “Condition Monitoring of Automatic Forging Machines,” VerTech, 04/03 – 12/03, $19,530.

18. “Intelligent Machine Health Monitoring and Maintenance System,” Ohio Aerospace Institute, 10/01 – 03/03, $76,336.

19. “Development of a Knowledge Agent for Intelligent Design and Manufacturing,” Ohio Department of Development (through Ohio Aerospace Institute), 01/01 – 03/03, $80,112.

20. “Automated FEA/CFD Hexahedral Mesh Generation Using an Integrated Neural Network/Rule-based Method,” Ohio Aerospace Institute, 01/01 – 12/02, $73,330.

21. “Parallel Distributed Manufacturing Knowledge Acquisition: A Neural Network/Fuzzy Logic Based Approach: Phase II,” Ohio Aerospace Institute, 09/99 – 08/01, $99,966.

22. “Improving Accuracy in Space-based Automatic Target Recognition: An Integrated Neuro-Fuzzy Approach,” NASA (through Ohio Space Grant Consortium), 12/99 – 05/00, $10,000.

23. “Parallel Distributed Manufacturing Knowledge Acquisition: A Neural Network/Fuzzy Logic Based Approach: Phase I,” Ohio Aerospace Institute, 09/98 – 08/99, $29,924.

Other External (Received As Co-PI): Total $547,316

24. “Development of a Web-based Manufacturing Performance Tool,” eSourceWorld, 04/01 – 02/02, $167,870.

25. “Productivity Tool Development for Operating Excellence in Flat Glass Manufacturing,” Pilkington North America, 09/99 – 08/00, $38,996

26. “Advanced Interactive Manufacturing Systems Commercialization,” Ohio Department of Development, 03/00 – 08/01, $230,000.

27. “Development of Self-Locking Flex Plate,” DaimlerChrysler, 09/99 – 08/00, $110,450. Internal (Received As PI): Total $77,155

28. “A Robust Feature Selection Approach for Adverse Drug Reaction Detection,” University of Cincinnati, 10/10 – 09/11, $25,000.

29. “Adaptation of Manufacturing Productivity Improvement Methodology to Healthcare Applications,” University of Cincinnati, 10/05 – 09/07, $25,000.

30. “Adaptation of Health Monitoring Techniques for Evidence-based Patient Care,” University of Cincinnati, 01/05 – 12/05, $6,500.

31. “Integrated Error Modeling and Synthesis for Proactive Tolerance Control,” University of Toledo, 06/01 – 08/01, $4,000.

32. “Integrating Supply Chain Selection, Product Characteristics, and Product Life Cycle,” University of Toledo, 06/00 – 08/00, $9,749.

33. “Manufacturing Knowledge Representation for CAD/CAM Systems: An Object-Oriented Approach,” University of Toledo, 06/98 – 08/98, $6,906.

Internal (Received As Co-PI): Total $35,771 34. “A Knowledge and Distributed Intelligence Approach to Concurrent Product, Process, and

Manufacturing System Design,” University of Toledo, 09/98 – 08/99, $35,771.

5

Equipment (Received As PI): Total $109,595 35. “SME In-Kind Gift Award: Software Tools to Support Integrated Manufacturing Research

and Education,” 12/00, $36,445. 36. “SME In-Kind Gift Award: Software Tools to Support Integrated Manufacturing Research

and Education,” 12/99, $73,150. SBIR (Received As Co-PI): Total $375,000

37. “Intelligent Condition-based Maintenance System, Phase II,” National Institute of Standards and Technology, 08/02 – 08/04, $300,000.

38. “Intelligent Condition-based Maintenance System, Phase I,” National Institute of Standards and Technology, 07/01 – 02/02, $75,000.

State of Ohio (Received As a Participating Faculty): Total $3,082,500 39. “Coming Out of the Pipeline: The UC Interdisciplinary Pathway to STEM Professionals,”

Ohio Board of Regents, 09/08 – 08/12, $3,082,500. PUBLICATIONS Archival Journal/Transaction Papers

1. N. Xu, X. Huang, and S. H. Huang, “A Measure of General Functional Dependence between Two Continuous Variables,” accepted by Communications in Statistics – Theory and Methods.

2. T.-C. Kuo, S. Smith, G. Smith, and S. H. Huang, “A Predictive Product Attribute Driven Eco-design Process Using Depth-first Search,” Journal of Cleaner Production, Vol. 112, No. 4, 2016, pp. 3201-3210.

3. Q. Su, Q. Luo, and S. H. Huang, “Cost-effective Analyses for Emergency Medical Services Deployment: a Case Study in Shanghai,” International Journal of Production Economics, Vol. 163, 2015, pp. 112-123.

4. S. H. Huang, “Supervised Feature Selection: A Tutorial,” Artificial Intelligence Research, Vol. 4, No. 2, 2015, pp. 22-37.

5. W. Ni, S. H. Huang, Q. Su, J. Shi, “Model-independent Evaluation of Tumor Markers and a Logistic-Tree Approach to Diagnostic Decision Support,” Journal of Healthcare Engineering, Vol. 5, No. 4, 2014, pp. 393-409.

6. P. Liu, S. H. Huang, A. Mokasdar, H. Zhou, L. Hou, “The Impact of AdditiveManufacturing in the Aircraft Spare Parts Supply Chain: Supply Chain OperationReference (SCOR)Model basedAnalysis,ProductionPlanningandControl, Vol. 25,No.13/14,2014,pp.1169-1181.

7. T.-C. Kuo, C. W. Hsu, S. H. Huang, D. C. Gong, “Data Sharing: A Collaborative Model for a Green Textile/Clothing Supply Chain,” International Journal of Computer Integrated Manufacturing, Vol. 27, No. 3, 2014, pp. 266-280.

8. C. Jiang and S. H. Huang, “Patent Review on Network-based Elderly Healthcare System in the US,” Recent Patents on Computer Science, Vol. 6, No. 3, 2013, pp. 181-190.

9. L. Hou, Y.-M. Wu, R.-S. Lai, and S. H. Huang, “Evaluation and Driver Analysis in Product Family Evolution,” International Journal of Advanced Manufacturing Technology, Vol. 69, No. 1-4, 2013, pp. 863-874.

6

10. S. H. Huang, P. Liu, A. Mokasdar, and L. Hou, “Additive Manufacturing and Its Societal Impact: A Literature Review,” International Journal of Advanced Manufacturing Technology, Vol. 67, No. 5-8, 2013, pp. 1191-1203.

11. C. Jiang and S. H. Huang, “A Computationally Efficient and Adaptive Approach for Online Embedded Machinery Diagnosis in Harsh Environments,” Advances in Mechanical Engineering, Article ID 847612, http://dx.doi.org/10.1155/2013/847612, 2013.

12. X. Guo, J. Xiang, S. Mun-Bryce, M. Bryce, S. H. Huang, X. Huo, Y. Wang, D. Rose, T. Degrauw, K. Gartner, T. Song, J. Schmit, and J. Vargus-Adams, “Aberrant High-gamma Oscillations in the Somatosensory Cortex of Children with Cerebral Palsy: A MEG Study,” Brain & Development, Vol. 34, No. 7, 2012, pp. 576-583.

13. S. H. Huang, D. Mo, J. Meller, and Michael Wagner, “Identifying a Small Set of Marker Genes Using Minimum Expected Cost of Misclassification,” Artificial Intelligence in Medicine, Vol. 55, Vol. 1, 2012, pp. 51-59.

14. R. Gong, and S. H. Huang, “A Kolmogorov-Smirnov Statistic Based Segmentation Approach to Learning from Imbalanced Datasets: With Application in Property Refinance Prediction,” Expert Systems With Application, Vol. 39, No. 6, 2012, pp. 6192-6200.

15. S. Atluru, S. H. Huang, and J. P. Snyder, “A Smart Machine Supervisory System Framework,” International Journal of Advanced Manufacturing Technology, Vol. 58, No. 5, 2012, pp. 563-572.

16. D. Mo and S. H. Huang, “Fractal-based Intrinsic Data Dimension Estimation and Its Application in Dimensionality Reduction,” IEEE Transactions on Knowledge and Data Engineering, Vol. 24, No. 1, 2012, pp. 59-71.

17. T. Chen, J. Ma, S. H. Huang, and J. Cai, “Novel and Efficient Method on Feature Selection and Data Classification,” Computer Research and Development, Vol. 49, No. 4, 2012, pp. 735-745.

18. A. Deshpande and S. H. Huang, “Simulation Games in Engineering Education: A State-of-the-Art Review,” Computer Applications in Engineering Education, Vol. 19, No. 3, 2011, pp. 399-410.

19. D. Mo and S. H. Huang, “Feature Selection Based on Inference Correlation,” Intelligent Data Analysis, Vol. 15, No. 3, 2011, pp. 375-398.

20. S. H. Huang, H. Li, D. Mo, and L. R. Wulsin, “Mining Large Medical Claims Database to Identify High Risk Patients: The Case of Antidepressant Utilization,” WIREs Data Mining and Knowledge Discovery, Vol. 1, No. 2, 2011, pp. 154-163.

21. L. Schmitt, M. Paterno, and S. H. Huang, “Validity and Internal Consistency of the International Knee Documentation Committee Subjective Knee Evaluation Form in Children and Adolescents,” The American Journal of Sports Medicine, Vol. 38, No. 12, 2010, pp. 2443-2447.

22. T.-C. Kuo, H.-Y. Ma, S. H. Huang, A. H. Hu, and C. S. Huang, “Barrier Analysis for Product Service System Using Interpretive Structural Model,” International Journal of Advanced Manufacturing Technology, Vol. 49, No. 1-4, 2010, pp. 407-417.

23. S. H. Huang, L. R. Wulsin, H. Li, and J. Guo, “Dimensionality Reduction for Knowledge Discovery in Medical Claims Database: Application to Antidepressant Medication Utilization Study,” Computer Methods and Programs in Biomedicine, Vol. 93, No. 2, 2009, pp. 115-123.

7

24. T. Chen, S. H. Huang, D. Liu, and J. Cai, “Research on Neural Cryptographic Protocols,” Computer Research and Development, Vol. 46, No. 8, 2009, pp. 1316-1324.

25. R. Gong, S. H. Huang, and T. Chen, “Robust and Efficient Rule Extraction through Data Summarization and its Application in Welding Fault Diagnosis,” IEEE Transactions on Industrial Informatics, Vol. 4, No. 3, 2008, pp. 198-206.

26. T. Chen, R. Gong, and S. H. Huang, “Integrated Knowledge-based Modeling and Its Application for Classification Problems,” Journal of Systems Engineering and Electronics, Vol. 19, No. 6, 2008, pp. 1277-1282.

27. K. M. N. Muthiah and S. H. Huang, “Overall Cycle-time Effectiveness (OCE) Metric for System-Level Service Performance Measurement and Bottleneck Detection,” International Journal of Industrial and Systems Engineering, Vol. 3, No. 5, 2008, pp. 594-609.

28. S. Dwivedi, S. H. Huang, J. Shi, and W. H. VerDuin, “Yield Prediction for Seamless Tubing Processes: A Computational Intelligence Approach,” International Journal of Advanced Manufacturing Technology, Vol. 37, No. 3/4, 2008, pp. 314-322.

29. K. M. N. Muthiah, S. Mahadevan, and S. H. Huang, “Automating Factory Performance Diagnostics using Overall Throughput Effectiveness (OTE) Metric,” International Journal of Advanced Manufacturing Technology, Vol. 36, No. 7/8, 2008, pp. 811-824.

30. R. Kothamasu and S. H. Huang, “Adaptive Mamdani Fuzzy Model for Condition-based Maintenance,” Fuzzy Sets and Systems, Vol. 158, No. 24, 2007, pp. 2715-2733.

31. K. M. N. Muthiah and S. H. Huang, “Overall Throughput Effectiveness (OTE) Metric for Factory Level Performance Monitoring and Bottleneck Detection,” International Journal of Production Research, Vol. 45, No. 20, 2007, pp. 4753-4769.

32. K. Hu and S. H. Huang, “Solving Inverse Problems Using Particle Swarm Optimization: An Application to Aircraft Fuel Measurement Considering Sensor Failure,” Intelligent Data Analysis, Vol. 11, No. 4, 2007, pp. 421-434.

33. S. H. Huang, R. Kothamasu, and N. Rapur, “Iterative Imputation Algorithms for Modeling with Incomplete Data,” Intelligent Data Analysis, Vol. 11, No. 2, 2007, pp. 189-202.

34. N. Xu, S. H. Huang, and Y. K. Rong, “Automatic Setup Planning: Current State-of-the-Art and Future Perspective,” International Journal of Manufacturing Technology and Management, Vol. 11, No. 2, 2007, pp. 193-208.

35. S. H. Huang and H. Keskar, “Comprehensive and Configurable Metrics for Supplier Selection,” International Journal of Production Economics, Vol. 105, No. 2, 2007, pp. 510-523.

36. S. Yao, X. Han, Y. Yang, Y. K. Rong, S. H. Huang, D. W. Yen, G. Zhang, “Computer-Aided Manufacturing Planning for Mass Customization: Part 1, Framework,” International Journal of Advanced Manufacturing Technology, Vol. 32, No. 1/2, 2007, pp. 194-204.

37. S. Yao, X. Han, Y. Yang, Y. K. Rong, S. H. Huang, D. W. Yen, G. Zhang, “Computer-Aided Manufacturing Planning for Mass Customization: Part 2, Automated Setup Planning,” International Journal of Advanced Manufacturing Technology, Vol. 32, No. 1/2, 2007, pp. 205-217.

38. S. Yao, X. Han, Y. Yang, Y. K. Rong, S. H. Huang, D. W. Yen, G. Zhang, “Computer-Aided Manufacturing Planning for Mass Customization: Part 3, Information Modeling,”

8

International Journal of Advanced Manufacturing Technology, Vol. 32, No. 1/2, 2007, pp. 218-228.

39. K. M. N. Muthiah and S. H. Huang, “A Review of Literature on Manufacturing Productivity Measurement and Improvement,” International Journal of Industrial and Systems Engineering, Vol. 1, No. 4, 2006, pp. 461-484.

40. M. Vonderembse, M. Uppal, S. H., Huang, and J. P. Dismukes, “Designing Supply Chains: Towards Theory Development,” International Journal of Production Economics, Vol. 100, No. 2, 2006, pp. 223-238.

41. R. Kothamasu, S. H. Huang, and W. H. VerDuin, “System Health Monitoring and Prognostics – A Review of Current Paradigm and Practices,” International Journal of Advanced Manufacturing Technology, Vol. 28, No. 9, 2006, pp. 1012-1024.

42. T.-C. Kuo, S.-H. Chang, and S. H. Huang, “Environmentally Conscious Design Using Fuzzy Multi-Attribute Decision-Making,” International Journal of Advanced Manufacturing Technology, Vol. 29, No. 3-4, 2006, pp. 209-215.

43. A. Lin and S. H. Huang, “A Continuous Sampling Approach to Pharmacy Operation Efficiency Study,” International Journal of Industrial and Systems Engineering, Vol. 1, No. 1/2, 2006, pp. 263-283.

44. N. Xu and S. H. Huang, “Multiple-Attribute Utility Analysis in Setup Plan Evaluation,” ASME Journal of Manufacturing Science and Engineering, Vol. 128, No. 1, 2006, pp. 220-227.

45. G. Wang, S. H. Huang, and J. P. Dismukes, “Manufacturing Supply Chain Design and Evaluation,” International Journal of Advanced Manufacturing Technology, Vol. 25, Vol. 1/2, 2005, pp. 93-100.

46. S. H. Huang, S. Sheoran, and H. Keskar, “Computer-Assisted Supply Chain Configuration Based on Supply Chain Operation Reference (SCOR) Model,” Computers & Industrial Engineering, Vol. 48, No. 2, 2005, pp. 377-394.

47. R. Kothamasu, S. H. Huang, and W. H. VerDuin, “Comparison of Computational Intelligence and Statistical Methods in Condition Monitoring for Hard Turning,” International Journal of Production Research, Vol. 43, No. 3, 2005, pp. 597-610.

48. R. Kothamasu, J. Shi, S. H. Huang, and H. R. Leep, “Comparison of Selected Model Evaluation Criteria for Maintenance Applications,” Structural Health Monitoring: An International Journal, Vol. 3, No. 3, 2004, pp. 213-224.

49. S. H. Huang, Q. Liu, and R. Musa, “Tolerance-based Process Plan Evaluation Using Monte Carlo Simulation,” International Journal of Production Research, Vol. 42, No. 23, 2004, pp. 4871-4891.

50. S. H. Huang, S. K. Sheoran, and G. Wang, “A Review and Analysis of Supply Chain Operation Reference (SCOR) Model,” Supply Chain Management: An International Journal, Vol. 9, No. 1, 2004, pp. 23-29.

51. G. Wang, S. H. Huang, and J. P. Dismukes, “Product Driven Supply Chain Selection Using Integrated Multi-Criteria Decision Making Methodology,” International Journal of Production Economics, Vol. 91, No. 1, 2004, pp. 1-15.

52. R. Musa, B. C. Shultes, and S. H. Huang, “Simulation-Based Manufacturing Error Synthesis: Input Analysis and Validation,” Transactions of the North American Manufacturing Research Institution/SME, Vol. 32, 2004, pp. 311-318.

9

53. R. Musa, S. H. Huang, and Y. K. Rong, “Simulation-Based Tolerance Stackup Analysis in Machining,” Transactions of the North American Manufacturing Research Institution/SME, Vol. 32, 2004, pp. 533-540.

54. C. Shoaf, A. Genaidy, W. Karwowski, S. H. Huang, “Improving Performance and Quality of Working Life: A Model for Organizational Health Assessment in Emerging Enterprises,” Human Factors and Ergonomics in Manufacturing, Vol. 14, No. 1, 2004, pp. 81-95.

55. S. H. Huang and N. Xu, “Automatic Setup Planning for Metal Cutting: An Integrated Approach,” International Journal of Production Research, Vol. 41, No. 18, 2003, pp. 4339-4356.

56. S. H. Huang, “Dimensionality Reduction in Automatic Knowledge Acquisition,” IEEE Transactions on Knowledge and Data Engineering, Vol. 15, No. 6, 2003, pp. 1364-1373.

57. H. Xing, S. H. Huang, and J. Shi, “Rapid Development of Knowledge-based System Via Integrated Knowledge Acquisition,” Artificial Intelligence for Engineering Design, Analysis and Manufacturing, Vol. 17, No. 3, 2003, pp. 221-234.

58. S. H. Huang, R. Kothamasu, Y. C. Shiralkar, and D. Bogstad, “Prediction of Plastic Preform Temperature Profile and Modeling Perspective,” International Journal of Manufacturing Science and Technology, Vol. 4, No. 2, 2003, pp. 56-83.

59. A. Jain, N. Xu, S. H. Huang, and Y. K. Rong, “Process Capability Analysis for Production Tolerance Assignment,” Transactions of the North American Manufacturing Research Institution/SME, Vol. 31, 2003, pp. 531-538.

60. S. H. Huang and Q. Liu, “Rigorous Application of Tolerance Analysis in Setup Planning,” International Journal of Advanced Manufacturing Technology, Vo. 21, No. 3, 2003, pp. 196-207.

61. S. H. Huang, J. P. Dismukes, J. Shi, Q. Su, M. A. Razzak, R. Bodhale, and D. E. Robinson, “Manufacturing Productivity Improvement Using Effectiveness Metrics and Simulation Analysis,” International Journal of Production Research, Vol. 41, No. 3, 2003, pp. 513-527.

62. S. H. Huang, J. P. Dismukes, J. Shi, Q. Su, G. Wang, M. A. Razzak, and D. E. Robinson, “Manufacturing System Modeling for Productivity Improvement,” Journal of Manufacturing Systems, Vol. 21, No. 4, 2002, pp. 249-259.

63. S. H. Huang and H. Xing, “Extract Intelligible and Concise Fuzzy Rules from Neural Networks,” Fuzzy Sets and Systems, Vol. 132, No. 2, 2002, pp. 233-243.

64. S. H. Huang, M. Uppal, and J. Shi, “A Product Driven Approach to Manufacturing Supply Chain Selection,” Supply Chain Management: An International Journal, Vol. 7, No. 3/4, 2002, pp. 189-199.

65. S. H. Huang, Y. K. Rong, and D. W. Yen, “Integrated Setup Planning and Fixture Design: Issues and Solutions,” Transactions of the North American Manufacturing Research Institution/SME, Vo. 30, 2002, pp 589-596.

66. S. H. Huang, Q. Su, N. Samant, and I. Khan, “Development of a Web-based Integrated Manufacturing Laboratory,” Computer Applications in Engineering Education, Vol. 9, No. 4, 2002, pp. 228-237.

67. F. Zhou, T.-C. Kuo, S. H. Huang, and H.-C. Zhang, “Form Feature and Tolerance Transfer from a 3D Model to a Setup Planning System,” International Journal of Advanced Manufacturing Technology, Vol. 19, No. 2, 2002, pp. 88-96.

10

68. T. C. Kuo, H. C. Zhang, and S. H. Huang, “Design for Manufacture and Design for “X”: Concepts, Applications, and Perspectives,” Computers & Industrial Engineering, Vol. 41, No. 3, 2001, pp. 241-260.

69. S. H. Huang, H. Xing, and M. Benjamin, “Automated Knowledge Acquisition for Design and Manufacturing: The Case of Micromachined Atomizer,” Journal of Intelligent Manufacturing, Vol. 12, No. 4, 2001, pp. 377-391.

70. S. H. Huang, H. Xing, and G. Wang, “Intelligent Classification of Drop Hammer Forming Process Method,” International Journal of Advanced Manufacturing Technology, Vol. 18, No. 2, 2001, pp. 89-97.

71. Q. Liu and S. H. Huang, “Prediction of Component Dimensional and Geometric Accuracy Through Manufacturing Error Analysis,” Transactions of the North American Manufacturing Research Institution/SME, Vol. 29, 2001, pp. 525-532.

72. S. H. Huang, K. Bhura, and G. Wang, “Cutter Path Simulation and Product Visualization Using AutoCAD,” Computer Applications in Engineering Education, Vol. 8, No. 2, 2000, pp. 113-126.

73. Q. Liu and S. H. Huang, “Geometric Tolerance Normalization and Its Application,” Transactions of the North American Manufacturing Research Institution/SME, Vol. 28, 2000, pp. 305-310.

74. T.-C. Kuo, H.-C. Zhang, and S. H. Huang, “Disassembly Analysis for Electromechanical Products: A Graph-based Heuristic Approach,” International Journal of Production Research, Vol. 38, No. 5, 2000, pp. 993-1007.

75. S. H. Huang, “Automated Setup Planning for Lathe Machining,” Journal of Manufacturing Systems, Vol. 17, No. 3, 1998, pp. 196-208.

76. H.-C. Zhang, T.-C. Kuo, H. Lu, S. H. Huang, “Environmentally Conscious Design and Manufacturing: A State-of-the-Art Survey,” Journal of Manufacturing Systems, Vol. 16, No. 5, 1997, pp. 352-371.

77. S. H. Huang and M. R. Endsley, “Providing Understanding of the Behavior of Feedforward Neural Networks,” IEEE Transactions on Systems, Man, and Cybernetics, Vol. 27, No. 3, 1997, pp. 465-474.

78. S. H. Huang, H.-C. Zhang, W. J. B. Oldham, “Tolerance Analysis for Setup Planning: A Graph Theoretical Approach,” International Journal of Production Research, Vol. 35, No. 4, 1997, pp. 1107-1124.

79. S. H. Huang and H.-C. Zhang, “Tolerance Analysis in Setup Planning for Rotational Parts,” Journal of Manufacturing Systems, Vol. 15, No. 5, 1996, pp. 340-350.

80. S. H. Huang and H.-C. Zhang, “Use of Tolerance Chart for NC Machining,” Journal of Engineering Design and Automation, Vol. 2, No. 1, 1996, pp. 91-104.

81. H.-C. Zhang, S. H. Huang, and J. Mei, “Operational Dimensioning and Tolerancing in Process Planning: Setup Planning,” International Journal of Production Research, Vol. 34, No. 7, 1996, pp. 1841-1858.

82. S. H. Huang, H.-C. Zhang, S. Sun, and H. Li, “Function Approximation and Neural-Fuzzy Approach to Machining Process Selection,” IEEE Transactions on Components, Packaging, and Manufacturing Technology - Part C: Manufacturing, Vol. 19, No. 1, 1996, pp. 9-18.

83. S. H. Huang, H.-C. Zhang, and M. L. Smith, “A Progressive Approach for the Integration of Process Planning and Scheduling,” IIE Transactions, Vol. 27, 1995, pp. 456-464.

11

84. S. H. Huang and H.-C. Zhang, “Neural-Expert Hybrid Approach for Intelligent Manufacturing: A Survey,” Computers in Industry, Vol. 26, No. 2, 1995, pp. 107-126.

85. H.-C. Zhang and S. H. Huang, “Applications of Neural Networks in Manufacturing: A State-of-the-Art Survey,” International Journal of Production Research, Vol. 33, No. 3, 1995, pp. 705-728.

86. H.-C. Zhang and S. H. Huang, “A Fuzzy Approach for Process Plan Selection,” International Journal of Production Research, Vol. 32, No. 6, 1994, pp. 1265-1279.

87. S. H. Huang and H.-C. Zhang, “Artificial Neural Networks in Manufacturing: Concepts, Applications, and Perspectives,” IEEE Transactions on Components, Packaging, and Manufacturing Technology - Part I, Vol. 17, No. 2, 1994, pp. 212-228.

Books and Book Chapters 1. S. H. Huang, Supply Chain Management for Engineers, New York, NY: Taylor &

Francis, 2013. 2. Y. Rong, S. H. Huang, and Z. Hou, Advanced Computer-Aided Fixture Design, San

Diego, CA: Elsevier, 2005. 3. S. Sarkar and S. H. Huang, “A Discritization-based Feature Selection Method for

Microarray Gene Expression Data Analysis,” in Advances in Medicine and Biology: Vol. 16, Nova Science Publishers, 2011.

4. S. H. Huang, “Supply Chain Research and Education: An Engineering Perspective,” in Supply Chain Management: Theories, Activities/Functions and Problems, Nova Science Publishers, 2010.

5. S. H. Huang and H.-C. Zhang, “Tolerance Analysis for Setup Planning in CAPP,” in Advanced Tolerancing Techniques, New York, NY : John Wiley & Sons, 1997, pp. 427-460.

Conference Papers 1. S. H. Huang, S. Anand, M. Kumar, I. Castaneda-emenaker, “A Virtual Company-based

Integrated Learning Methodology to Produce Industry Ready Graduate,” ASEE 122nd Annual Conference and Exposition, Seattle, WA, June 14-17, 2015.

2. B. Issac, M. Kumar, S. H. Huang, D. Humpert, “Inverse Kinematics and Extended Kalman Filter based Motion Tracking of Human Limb,” ASME 2014 Dynamic Systems and Control Conference, San Antonio, TX, October 22-24, 2014.

3. S. H. Huang, S. Anand, M. Sundaram, and M. Kumar, “EXPLORES: An Integrated Learning Environment to Produce Industry Ready Graduates,” IEEE Frontiers in Education Conference, Oklahoma City, OK, October 23-26, 2013.

4. Q. H. Jiang, Z. C. Liu, H. C. Zhang, and S. H. Huang, “Three Dimensional Sustainability Assessment: A Case of Combustion Motor Industry in China,” The 20th CIRP International Conference on Life Cycle Engineering, Singapore, August 17-19, 2013.

5. S. H. Huang, C. Jiang, E. Fitzwater, and Q. Su, “An Overview of Elderly Care Supply Chain and Assistive Technologies,” The 7th International Conference on Operations and Supply Chain Management, Shanghai, P. R. China, June 22-25, 2013.

6. M. Sundaram, S. H. Huang, S. Anand, M. Kumar, I. Castañeda-Emenaker, L. Brunson Evans, Y. Zhang, “Experiential and Problem-based Learning within Opportunities for Real-world Engineering Settings,” Proceedings of ASEE North Central Section Conference, Columbus, OH, April 5-6, 2013.

12

7. Y. Zhang, S. H. Huang, and J. Guo, “Hypergeometric Hypothesis Test-based Quantification of Drug and Adverse Drug Reaction Association,” The 9th International Conference on Service Systems and Service Management, Shanghai, P. R. China, July 2-4, 2012.

8. S. Atluru, A. Deshpande, R. Pieper, and S. H. Huang, “PNEUVIZ: MTConnect Compliant Compressed Air Monitoring Application,” 2012 ASME International Conference on Manufacturing Science and Engineering, Notre Dame, IN, June 4-8, 2012.

9. S. H. Huang, J. Meller, M. Wagner, and D. Mo, “Feature Selection Using Minimum Expected Cost of Misclassification: With Application in Gene Expression Based Diagnosis,” NSF CMMI Engineering Research and Innovation Conference 2011, Atlanta, GA, January 4-7, 2011.

10. S. Atluru, R. Pavel, J. P. Snyder, and S. H. Huang “Smart Monitoring of Cutting Tool based on Pre-process Data,” 2009 ASME International Conference on Manufacturing Science and Engineering, West Lafayette, IN, October 4-7, 2009.

11. S. H. Huang, J. Meller, M. Wagner, and S. Sarkar, “Fast Feature Selection for High Dimensional DNA Microarray Data Analysis,” NSF CMMI Engineering Research and Innovation Conference 2009, Honolulu, HI, June 22-25, 2009.

12. S. H. Huang, L. R. Wulsin, and D. Mo, “A Systematic Study of Intrinsic Data Dimension and Fractal Dimension: With Application to Breast Cancer Diagnosis,” NSF CMMI Engineering Research and Innovation Conference 2009, Honolulu, HI, June 22-25, 2009.

13. R. Gong, T. Chen, and S. H. Huang, “A Fuzzy Rule Extraction Method for Welding Fault Diagnosis,” 4th International Symposium on Management, Engineering, and Informatics, Orlando, FL, June 29 – July 2, 2008.

14. T. Chen and S. H. Huang, “Tree Parity Machine-based One-time Password Authentication Schemes,” 2008 International Joint Conference on Neural Networks, Hong Kong, June 1 – 6, 2008

15. S. Atluru, A. Deshpande, S. H. Huang, and J. P. Snyder, “Smart Machine Supervisory System: Concept, Definition, and Application,” 62nd Meeting of the Society for Machinery Failure Prevention Technology, Virginia Beach, VA, May 6-8, 2008.

16. S. H. Huang, L. R. Wulsin, H. Li, and D. Mo, “A Moving Window Method for Direct Dependency Test,” NSF CMMI Engineering Research and Innovation Conference 2008, Knoxville, TN, January 7-10, 2008.

17. N. Xu, S. H. Huang, and L. R. Wulsin, “Dependency Test for Dimensionality Reduction in Healthcare Data Analysis,” IIE Annual Conference and Expo 2007, May 19-23, Nashville, TN, 2007.

18. A. C. Lin, S. H. Huang, J. J. Qian, Y. Chen, X. Ma, “The Effects of Automated Prescription Filling System On the Involvement of Pharmacy Staff in Prescription Filling Activities,” ISPOR 2nd Asia-Pacific Conference, March 5-7, Shanghai, China, 2006.

19. L. R. Wulsin, K. Hu, S. H. Huang, and J. Welge, “Depression and Cardiovascular Morbidity in the Medicare Health Outcomes Study,” American Psychosomatic Society 64th Annual Scientific Meeting, March 1-4, Denver, CO, 2006.

20. N. Xu, S. H. Huang, and J. Snyder, “Systematic Investigation of Tool Wear Monitoring in Turning Operations,” 2005 ASME International Mechanical Engineering Congress and Exposition, November 5-11, Orlando, FL, 2005.

21. A. Z. Zeng, K. Rong, and S. H. Huang, “A Hub-based Supplier Alliance of Small Manufacturing Enterprises in Collaborative Manufacturing,” IEEE International

13

Conference on Service Operations and Logistics, and Informatics, August 10-12, Beijing, P. R. China, 2005.

22. R. Kothamasu, J. Shi, and S. H. Huang, “Human Centered Neuro-Fuzzy Modeling,” The 8th World Multi-Conference on Systemics, Cybernetics, and Informatics, July 18-21, Orlando, FL, 2004.

23. M. Vonderembse, S. H. Huang, and J. P. Dismukes, “Designing Supply Chains: Towards Theory Development,” 2004 Western Decision Sciences Annual Meeting, Manzanillo, Mexico April 13-17, 2004.

24. Y. Rong, X. Han, W. Hu, H. Song, and S. H. Huang, “Integrated Fixture Design in Manufacturing Planning,” 2004 NSF Design and Manufacturing Grantees Conference, Dallas, TX, January 6-9, 2004.

25. R. Kothamasu, S. H. Huang, and W. H. VerDuin, “Analysis of Performance Evaluation Metrics to Combat the Model Selection Problem,” NIST Workshop on Performance Metrics for Intelligent Systems, Gaithersburg, MD, September 16-18, 2003.

26. Y. Shiralkar, L. K. Miller, J. P. Dismukes, S. H. Huang, and G. C. Daley, "Stage-Gate Modeling and Metrics for Software Commercialization," 2003 Portland International Conference on Management of Engineering Technology, Portland, OR, July 20-24, 2003.

27. J. P. Dismukes, L. K. Miller, Y. Shiralkar, R. Miller, S. H. Huang, and V. A. Ames, “Technological Innovation By Design: An Information Enhanced Methodology For Accelerated Innovation,” 2003 Portland International Conference on Management of Engineering Technology, Portland, OR, July 20-24, 2003.

28. S. Yao, X. Han, Y. Rong, S. H. Huang, D. W. Yen, and G. Zhang, “Feature-based Computer-aided Manufacturing Planning for Mass Customization of Non-rotational Parts,” 2003 ASME Computers and Information in Engineering Conference, Chicago, IL, September 2-3, 2003.

29. R. Musa and S. H. Huang, “3D Tolerance Stack-up Analysis,” 2003 Industrial Engineering Research Conference, Portland, OR, May 18-20, 2003.

30. Y. K. Rong and S. H. Huang, “Feature-based Computer Aided Manufacturing Planning for Mass Customization,” 2003 NSF Design and Manufacturing Grantees Conference, Tuscaloosa, Alabama, January 6-9, 2003.

31. S. H. Huang, J. Shi, S. Maloo, and E. Steinthorsson, “Automatic Generation of Quadrilateral Multi-Block Topology for FEA/CFD Applications,” 2002 IEEE International Conference on Industrial Technology, Bangkok, Thailand, December 11-14, 2002.

32. R. Kothamasu, S. H. Huang, and I. Marinescu, “Intelligent Tool Wear Estimation for Hard Turning: Neural-Fuzzy Modeling and Model Evaluation,” 2002 International CIRP Design Seminar, Hong Kong, May 16-18, 2002.

33. I. Marinescu, R. Felix, R. Kothamasu, S. H. Huang, “Prediction of 3-D Surface Texture Using Neuro-Fuzzy Techniques,” 2002 International CIRP Design Seminar, Hong Kong, May 16-18, 2002.

34. Y. Rong, S. H. Huang, and D. Yen, “Integrated Setup Planning and Fixture Design,” 2002 NSF Design and Manufacturing Grantees Conference, San Juan, January 2002.

35. J. P. Dismukes and S. H. Huang, “Measurement and Improvement of Factory Level Productivity,” 2002 NSF Design and Manufacturing Grantees Conference, San Juan, January 2002.

14

36. S. H. Huang, R. Kothamasu, and H. Xing, “Automatic Generation of Pragmatic and Intelligible Fuzzy Rules,” IEEE Systems, Man and Cybernetics 2001, Tuscon, AZ, October 8-10, 2001.

37. Q. Liu and S. H. Huang, “Structured Process Plan Information Modeling for Tolerance Prediction,” the 5th International Conference on Engineering Design and Automation, Las Vegas, NV, August 5-8, 2001.

38. S. H. Huang, H. Xing, and R. Kothamasu, “An Integrated Approach to Manufacturing Knowledge Acquisition: With Application to Process Planning for Drop Hammer Forming,” IJCAI-01 Workshop on Artificial Intelligence and Manufacturing, Seattle, WA, August 5, 2001.

39. G. Wang, S. H. Huang, and J. P. Dismukes, “An Analytic Hierarchy Process Model-Based Framework for Supply Chain Design,” IERC 2001, Dallas, TX, May 20-22, 2001.

40. T.-C. Kuo, S. H. Chang, and S. H. Huang “Fuzzy Multi-Attribute Decision-Making in Green Manufacturing,” The 5th Annual International Conference on Industrial Engineering Theory, Applications, and Practice, paper # 278, 2000.

41. P. Svenmarck, S. H. Huang, and E. P. Blasch, “Transparent Neurofuzzy Models of Human Performance,” Proceedings of the Fifth Annual Conference on Human Interaction with Complex Systems (HICS), April 30-May 2, Beckman Institute, University of Illinois, 2000.

42. S. H. Huang, “Mathematical Formulation of Automated Setup Planning,” the 2000 Japan-USA Symposium on Flexible Automation, July 23-26, 2000, Ann Arbor, MI.

43. G. Wang, J. P. Dismukes, S. H. Huang, and S. Chandrasekaran, “Manufacturing Productivity Assessment Using Overall Equipment Effectiveness (OEE),” the 2000 Japan-USA Symposium on Flexible Automation, July 23-26, 2000, Ann Arbor, MI.

44. S. H. Huang and H. Xing, “Heuristic Manufacturing Knowledge Modeling: A Neural Network/Fuzzy Logic Hybrid Approach,” the 4th International Conference on Frontiers of Design and Manufacturing, pp. 80-90, June 16-19, 2000, Hangzhou, P. R. China.

45. S. H. Huang, G. Wang, and J. P. Dismukes, “A Manufacturing Perspective on Supply Chain Integration,” Proceedings of the 10th International Conference on Flexible Automation and Intelligent Manufacturing, Vol. 1, pp. 204-214, June 26-28, 2000, College Park, MD.

46. S. H. Huang and Q. Liu, “Geometric Tolerance Normalization and Its Application: The Case of Parallelism and Perpendicularity Tolerances,” Proceedings of the 10th International Conference on Flexible Automation and Intelligent Manufacturing, Vol. 1, pp. 173-182, June 26-28, 2000, College Park, MD.

47. S. H. Huang, “An Object-Oriented Approach for Manufacturing Knowledge Representation in CAD/CAM Systems: Initial Study,” CAICIM Conference, Rensselaer Polytechnic Institute, October 7-9, 1998, Troy, New York.

48. H. C. Zhang, T. C. Kuo, and S. H. Huang, “Recycling Model of End-of-Life Product,” Japan-USA Symposium on Flexible Automation, pp. 1127-1130, July 7-10, 1996, Boston, MA.

49. H. C. Zhang, F. Zhou, T. C. Kuo, and S. H. Huang, “Form Feature and Tolerance Transfer from a 3D Model to a Setup Planning System,” Proceedings of the 2nd World Conference on Integrated Design and Process Technology, pp. 358-368, 1996.

15

50. D. Zhang, S. H. Huang, and H.-C. Zhang, “Integrated Process Planning,” Proceedings of the 1995 NSF Design and Manufacturing Grantees Conference, pp. 163-164, January, 1995.

51. S. H. Huang and H.-C. Zhang, “On the Use of Knowledge-Based Connectionist Model in CAPP systems,” Manufacturing Science and Engineering, PED-Vol. 68-1, ASME, 1994, pp. 65-74.

52. S. H. Huang and H.-C. Zhang, “Neural Networks in Manufacturing,” Robotics and Manufacturing: Proceedings of the Fifth International Symposium on Robotics and Manufacturing, pp. 743-748, August, 1994

53. S. H. Huang, J. Mei, H.-C. Zhang, and S. R. Ray, “IPPS: An Integrated Process Planning Project,” Technical Papers of the North American Manufacturing Research Institution of SME 1994, Dearborn, MI: SME, 1994, pp. 123-128.

54. J. Mei, S. H. Huang, and H.-C. Zhang, “Setup and Datum Selection in CAPP,” Proceedings of the 1994 NSF Design and Manufacturing Grantees Conference, National Science Foundation, pp. 185-186, 1994.

55. H.-C. Zhang, S. H. Huang, and J. Mei, “An Introduction to An Integrated and Intelligent Process Planning Model,” Manufacturing Science and Engineering, PED-Vol.64, ASME, 1993, pp. 291-298.

56. S. H. Huang and H.-C. Zhang, “Overview of Neural Networks in Manufacturing,” Proceedings of 1993 IEEE/CHMT International Electronics Manufacturing Technology Symposium, Santa Clara, CA, pp. 177-190, October, 1993.

57. S. H. Huang and H.-C. Zhang, “A Neural-Expert Hybrid Knowledge Acquisition Model for Process Planning,” AUTOFACT'93 Conference Proceedings, November 8-11, 1993, Chicago, IL, pp. 25-1 - 25-16.

58. S. H. Huang, J. Mei, and H.-C. Zhang, “An Integrated Model for Process Planning and Production Scheduling,” 1993 NSF DMS Grantees Conference, Charlotte, NC, January, 1993.

PRESENTATION (NONE CONFERENCE) 1. “Introduction to Design of Experiments,” Dalian University of Technology, Dalian, P. R.

China, June 2012. 2. “Adaptive Machining: A First-principle/Data-driven Hybrid Approach using MTConnect

Standard,” TechSolve, Cincinnati, OH, April 2012. 3. “Predictive Analytics and Its Applications,” University of Cincinnati, Cincinnati, OH,

February 2012. 4. “Finding a Needle in a Haystack: Real-world Data Mining Challenges and Solutions,”

Proctor and Gamble, Cincinnati, OH, September 2011. 5. “A Virtual Company Based Multi-channel Learning Methodology for Supply Chain

Education,” Xiamen University, Xiamen, P. R. China, July 2011. 6. “A Virtual Company Based Multi-channel Learning Methodology for Supply Chain

Education,” Dalian University of Technology, Dalian, P. R. China, June 2011. 7. “A Virtual Company Based Multi-channel Learning Methodology for Supply Chain

Education,” Shandong University, Jinan, P. R. China, June 2011. 8. “A Virtual Company Based Multi-channel Learning Methodology for Supply Chain

Education,” Zhejiang University, Hangzhou, P. R. China, June 2011.

16

9. “Biomarker Discovery in Large Databases,” Tongji University, Shanghai, P. R. China, June 2011.

10. “Robust and Efficient Knowledge Discovery and Its Applications,” Tsinghua University, Beijing, P. R. China, July 2010.

11. “Robust and Efficient Knowledge Discovery and Its Applications,” Tongji University, Shanghai, P. R. China, July 2010.

12. “Robust and Efficient Knowledge Discovery and Its Applications,” Xiamen University, Xiamen, P. R. China, July 2010.

13. “Robust and Efficient Knowledge Discovery and Its Applications,” Hefei University of Technology University, Hefei, P. R. China, July 2010.

14. “Robust and Efficient Knowledge Discovery and Its Applications,” Dalian University of Technology, Dalian, P. R. China, July 2010.

15. “Supplier Based Manufacturing,” Jilin University, Jilin, P. R. China, August, 2009. 16. “Supplier Based Manufacturing,” Shandong University, Jinan, P. R. China, August, 2009. 17. “Construction, PSI, and QCVQ Mini-lab Task Optimization,” Procter & Gamble,

Cincinnati, OH May 2009. 18. “Alert Generation Methods for Aircraft Engine Condition Monitoring,” GE Aviation,

Cincinnati, OH, March 2009. 19. “KDD (Knowledge Discovery in Databases) for Evidence-based Patient Care,” Texas

Tech University, Lubbock, TX, March 2009. 20. “DSM (Design Structure Matrix) for Construction/PSI Optimization,” Procter & Gamble,

Cincinnati, OH, January 2009. 21. “Condition Monitoring for Evidence-based Care of Psychiatric Patients,” Shanghai Jiao

tong University, Shanghai, P. R. China, December 2007. 22. “Condition Monitoring for Evidence-based Care of Psychiatric Patients,” Zhejiang

University of Technology, Hanzhou, P. R. China, December 2007. 23. “Smart Machines Platform Initiative: Supervisory System,” TechSolve, Inc., Cincinnati,

OH, April 2007. 24. “Process Modeling with Incomplete Data,” Worcester Polytechnic Institute, Worcester,

MA, March 2007. 25. “Model-based Construction Optimization,” Procter & Gamble, Cincinnati, OH, January

2007. 26. “Condition Monitoring for Evidence-based Patient Care,” Institute for the Study of

Health, University of Cincinnati, Cincinnati, OH, January 2007. 27. “Smart Machines Supervisory System,” TechSolve, Inc., Cincinnati, OH, November

2006. 28. “Sensor Selection and Missing Data Reconstruction for Intelligent Condition-based

Maintenance”, General Motor, Warren, MI, May, 2006. 29. “Knowledge-based Modeling With Application in Condition Monitoring and Diagnosis,”

TechSolve, Inc., Cincinnati, OH, May, 2006. 30. “Research at Intelligent Systems Laboratory,” Zhejiang University of Technology,

Hangzhou, P. R. China, April 2006. 31. “Research at Intelligent Systems Laboratory,” Hong Kong University, Hong Kong, April

2006. 32. “Research at Intelligent Systems Laboratory,” Hong Kong Polytech University, Hong

Kong, April 2006.

17

33. “System Monitoring, Diagnosis, and Prognosis,” Cincinnati Lamb, Hebron, KY, February 2006.

34. “Supplier-based Manufacturing,” Toyota Motor Manufacturing Kentucky, Inc., Georgetown, KY, September 2005.

35. “Closed-loop Process Design,” TechSolve, Inc., Cincinnati, OH, June 2005. 36. “Intelligent Diagnostics Tool for Multi-dimensional Data Set: An Aircraft Engine

Example,” University of Michigan, Ann Arbor, MI, May 2005. 37. “System Monitoring, Diagnosis, and Prognosis,” College of Pharmacy, University of

Cincinnati, Cincinnati, OH, March 2005. 38. “Fully Integrated Virtual Company Experience-based Manufacturing Education,”

TechSolve, Cincinnati, OH, February 2005. 39. “Information Technology Enhanced Manufacturing: Smart Factory Research Projects,”

TechSolve, Cincinnati, OH, July 2004. 40. “Application of Equipment Health Monitoring Techniques to Medical Diagnosis/

Prognosis,” Center for Quality Innovations & Research, Cincinnati, OH, June 2004. 41. “Intelligent Condition-based Maintenance System: Modeling Technique and Case

Studies,” National Institute of Standards and Technology, Gaithersburg, MD, October 2003.

42. “Preliminary Study on GE Engine Fault Diagnosis,” GE Power Systems, Cincinnati, OH, July 2003.

43. “Intelligent Condition-based Maintenance System,” Timken, Canton, OH, February 2003.

44. “Neural Network Model for Predicting Microbial Spoilage,” T. Marzetti Company, Columbus, OH, November 2002.

45. “Intelligent Condition-based Maintenance System: An Overview,” National Institute of Standards and Technology, Gaithersburg, MD, November 2002.

46. “Process Capability-based Production Tolerance Assignment,” Delphi Automotive Systems, Dayton, OH, October 2002.

47. “Intelligent Condition-based Maintenance System,” Aircraft Braking Systems Corporation, Akron, OH, September 2002.

48. “Sensor Calibration Study: A Comparison of Neural Networks and Multiple Regression,” Kraft Foods, Madison, WI, July 2002.

49. “Automated FEA/CFD Hexahedral Mesh Generation Using an Integrated Neural Network/Rule-based Method,” Ohio Aerospace Institute, Cleveland, OH, April 2002.

50. “Intelligent Condition-Based Maintenance Systems,” Allison Advanced Development Company, Indianapolis, IN, November 2001.

51. “Intelligent Condition-Based Maintenance Systems,” Caterpillar, Peoria, IL, October 2001.

52. “Knowledge-Based Manufacturing Research at Intelligent CAM Systems Laboratory,” Optimal Inc., Novi, MI, April 2001.

53. “Knowledge-Based Manufacturing Research at Intelligent CAM Systems Laboratory,” Rutgers University, New Brunswick, NJ, April 2001.

54. “Proactive Tolerance Control Research at Intelligent CAM Systems Laboratory,” University of Cincinnati, Cincinnati, OH, March 2001.

55. “Knowledge-Based Manufacturing Research at Intelligent CAM Systems Laboratory,” Plastic Technologies Inc., Holland, OH, March 2001.

18

56. “Knowledge Management Case Study: Drop Hammer Forming,” Lorain Tubular Company, Lorain, OH, March 2001.

57. “Knowledge-Based Engineering: With Application in Intelligent Design and Manufacturing,” Ohio Aerospace Institute, Cleveland, OH, October 2000.

58. “Automated FEA/CFD Hexahedral Mesh Generation Using an Integrated Neural Network/Rule-based Method,” Parker Hannifin Corporation, Mentor, OH, October 2000.

59. “Heuristic Manufacturing Knowledge Modeling: A Neural Network/Fuzzy Logic Based Approach,” Kansas State University, Manhattan, KS, April 2000.

60. “Heuristic Manufacturing Knowledge Modeling: A Neural Network/Fuzzy Logic Based Approach,” University of Illinois-Chicago, Chicago, IL, March 2000.

61. “Automatic Manufacturing Knowledge Acquisition: A Neural Network/Fuzzy Logic Based Approach,” GE Aircraft Engine, Cincinnati, OH, March 2000.

62. “Automatic Manufacturing Knowledge Acquisition: A Neural Network/Fuzzy Logic Based Approach,” Rolls-Royces Allison, Indianapolis, IN, February 2000.

63. “Automatic Manufacturing Knowledge Acquisition: A Neural Network/Fuzzy Logic Based Approach,” Parker Hannifin Corporation, Mentor, OH, February 2000.

64. “Automated Setup Planning,” Worcester Polytechnic University, Worcester, MA, July 1999.

65. “Parallel Distributed Manufacturing Knowledge Acquisition: A Neural Network/Fuzzy Logic Based Approach,” Ohio Aerospace Institute, Cleveland, OH, May 1999.

66. “Parallel Distributed Manufacturing Knowledge Acquisition: A Neural Network/Fuzzy Logic Based Approach,” Rolls-Royces Allison, Indianapolis, IN, April 1999.

67. “Automatic Knowledge Acquisition for Drop Hammer Forming,” B. F. Goodrich Aerospace, Chula Vista, CA, January 1999.

68. “Parallel Distributed Manufacturing Knowledge Acquisition: A Neural Network/Fuzzy Logic Based Approach,” B. F. Goodrich Aerospace, Chula Vista, CA, August 1998.

69. “An Algorithmic Approach to Setup Planning in CAPP,” Louisiana State University, Baton Rouge, LA, April 1997.

70. “Automated Setup Planning for Lathe Machining,” University of Toledo, Toledo, OH, April 1997.

71. “Computer Integrated Manufacturing,” University of Minnesota-Duluth, Duluth, MN, May 1996.

72. “A Disassembly Model for End-of-life Electromechanical Product Recycling,” University of Texas-El Paso, El Paso, Texas, May 1996.

73. “A Graph-Matrix Approach for Setup Planning in CAPP,” Unigraphics Solutions Inc., Cypress, CA, April 1996.

74. “A Graph-based Approach for Setup Planning,” Ohio University, Athens, OH, May 1995. SOFTWARE TOOLS

1. MillSim: A Cutter Path Simulation and Product Visualization Tool 2. QMesh: A Preprocessing Tool for Quadrilateral Mesh Generation 3. RS: Neural Network Modeling and Response Surface Visualization 4. AKD: Adaptive Knowledge Discovery from Dataset 5. SimPro: Metrics-based Automatic Factory Performance Diagnostics 6. DP: Diagnosis and Prognosis Modeling 7. VTurn: Virtual Turning and Inspection

19

8. QCV Planner: Quality Confirmation Analysis and Optimization Tool 9. Supply Chain Live: A Simulation Game-based Supply Chain Education Tool

COURSE TAUGHT

University of Cincinnati

Quarter Course Enrollment Professor Rating Winter 2002

INDS 556 (Undergraduate) Production Planning and Control

24 4.4

Spring 2002

INDS 411 (Undergraduate) Quality Control and Reliability

22 5.0

Spring 2002

INDS 728-001 (Graduate) Artificial Intelligence in Manufacturing

27 4.5

Autumn2002

INDS 745-001 (Graduate) Introduction to Supply Chain Management

31 4.1

Winter 2003

INDS 454 (Undergraduate) Operations Research II

10 4.5

Spring 2003

INDS 454 (Undergraduate) Operations Research II

10 4.2

Spring 2003

INDS 728-001(Graduate) Artificial Intelligence in Manufacturing

7 4.0

Autumn 2003


22 4.3

Winter 2004


25 4.1

Winter 2004

INDS 411 (Undergraduate) Quality Control and Reliability

20 4.0

Spring 2004


6 5.0

Autumn 2004

INDS 555 (Undergraduate) Simulation

12 4.5

Autumn 2004


24 4.8

Winter 2005


13 4.7

Winter 2005


8 4.8

Autumn 2005


24 4.8

Autumn 2005

INDS 555 (Undergraduate) Simulation

9 4.6

Winter 2006


14 4.3

Winter 2006


7 4.6

Autumn 2006


22 4.1

Winter 2007


7 4.4

20

Winter 2007


17 4.5

Autumn 2007

MECH 556 (Undergraduate) Production Planning and Control

10 4.8

Autumn2007


4 4.0

Winter 2008


26 3.8

Spring 2009

MECH 240 (Undergraduate) Engineering Statistical Methods I

41 4.5

Autumn 2009


27 4.3

Winter 2010


48 3.9

Winter 2010

MECH 676 (Duel) Introduction to Supply Chain Management

42 4.3

Autumn 2010


30 4.4

Winter 2011


49 4.2

Winter 2011


32 4.4

Spring 2012


25 4.7

Fall 2012

MECH 6075 (Duel) Production Planning and Control

12 4.9

Spring 2013

MECH 6076 (Duel) Supply Chain Modeling and Optimization

37 4.5

Fall 2014

MECH 6075 (Graduate) Production Planning and Control

39 4.7

Spring 2015

MECH 4043 (Undergraduate) Statistics for ME

43 4.2

Spring 2015

MECH 6076 (Duel) Supply Chain Management for Engineers

45 4.1

Spring 2015

MECH 4043 (Undergraduate) Statistics for ME

45 4.0

Summer 2015

MECH 6076 (Graduate) Supply Chain Management for Engineers

35 4.3

Fall 2015


26 3.8

Spring 2016

MECH 6076 (Duel) Supply Chain Management for Engineers

57 4.0

Spring 2016


22 4.0

Average 4.4 *(scale from 5 to 1, 5 being excellent and 1 being poor).

University of Toledo

21

Semester Course Enrollment Course Evaluation Spring 1998

MIME 4020/5020 (Dual Level) Statistical Quality Control

33 1.50

Fall 1998

MIME 1100 (Undergraduate) Introduction to CAD

186 1.55

Spring 1999

MIME 4070/5070 (Dual Level) Computer-Aided Manufacturing

29 1.44

Spring 1999

MIME 6980-007 (Graduate) AI Application in Manufacturing

17 1.58

Fall 1999


34 1.85

Fall 1999


174 1.65

Spring 2000


34 1.39

Spring 2000

MIME 6980-001 (Graduate) AI Application in Manufacturing

18 1.32

Fall 2000


45 1.95

Fall 2000


137 1.90

Spring 2001


48 1.39

Spring 2001

MIME 4100/5100 (Dual Level) Manufacturing Systems Simulation

41 1.41

Average 1.58 *(scale from 1 to 5, 1 being the best and 5 being the worst).

STUDENT ADVISING

In Progress S. Alturu Ph.D. Admitted in Autumn 2009, proposal defended in May 2013 S. Yaddanapudi Ph.D. Admitted in Fall 2012 H. Dai Ph.D. Admitted in Fall 2015 S. Garg M.S. Admitted in Fall 2014

Dissertation/Thesis Y. Zhang Ph.D. Group-wise Distance Learning Algorithm for User

Recommendation Systems, August 2016 W. Ni Ph.D. Ontology-based Feature Construction on Non-structured Data,

August 2015 C. Jiang Ph.D. A Smart and Minimum-intrusive Monitoring Framework Design

for Health Assessment of the Elderly, August 2015 S. Sarkar Ph.D. Feature Selection with Missing Data, August 2013 H. Li Ph.D. Feature Selection for High-risk Pattern Discovery in Medical

Data, December 2012

22

D. Mo Ph.D. Robust and Efficient Feature Selection for High Dimensional Datasets, March 2011

R. Gong Ph.D. A Segmentation and Rebalancing Approach to Classification for Imbalanced Datasets, March 2011

N. Xu Ph.D. Aggressive Dimensionality Reduction for Data-Driven Modeling, June 2007

K. Muthiah Ph.D. System Level Effectiveness Metrics for Performance Monitoring and Diagnostics, August 2006

R. Kothamasu Ph.D. Intelligent Condition-based Maintenance: A Soft Computing Approach to System Diagnosis and Prognosis, December 2005

H. Xing Ph.D. An Integrated Approach to Manufacturing Knowledge Acquisition: With Application to Process Planning for Drop Hammer Forming, August 2003

Q. Liu Ph.D. Manufacturing Error Analysis and Monte Carlo Simulation for Proactive Tolerance Control in Process Planning, May 2003.

G. Wang Ph.D. Product Enabled Design and Evaluation of Manufacturing Supply Chain: An Integrated Multi-criteria Decision-based Methodology, December 2001

S. Shevade M.S. Minimizing Makespan of a Multi-mode Multi-item Packing Machine Subject to Resource and Inventory Constraints, August 2016

S. Yaddanapudi M.S. High-risk Patient Identification: Patient Similarity, Missing Data Analysis, and Pattern Visualization, April 2016

V. Madhvarayan M.S. Integrated Production and Distribution Planning for a Food Processing Company, April 2016

K. Yuan M.S. A Study of Effectiveness of Feature Subset Selection in Classification Problems, April 2014

H. Zhou M.S. Inventory Management and Inbound Logistics Optimization for a Food Processing Company, December 2013

W. Ni M.S. A Review and Comparative Study on Univariate Feature Selection Techniques, December 2012

Y. Zhang M.S. Application of Hyper-geometric Hypothesis-based Quantification and Markov Blanket Feature Selection Methods to Generate Signals for Adverse Drug Reaction Detection, December 2012

A. Mokasdar M.S. A Quantitative Study of the Impact of Additive Manufacturing in the Aircraft Spare Parts Supply Chain, December 2012

S. Jin M.S. Quality Assessment Planning Using Design Structure Matrix and Resource Constraint Analysis, December 2010

S. Sah M.S. A Virtual Reality-based Progressive Learning Paradigm for Supply Chain Management Education, August 2010

S. Atluru M.S. Prototype Smart Machine Supervisory System, June 2009. A. Deshpande M.S. Virtual Enterprise Resource Planning for Production Planning

and Control Education, June 2008 G. Kelley M.S. A Patient Centered Workflow Automation System for Occupational

and Physical Therapy, June 2007

23

R. Gong M.S. A Knowledge-based Modeling Tool for Classification, August 2006

K. Hu M.S. Solving Inverse Problems Using Particle Swarm Optimization: An Application to Aircraft Fuel Measurement Considering Sensor Failure, March 2006

S. Mahadevan M.S. Automated Simulation Analysis of Overall Factory Effectiveness, August 2004

H. Keskar M.S. Supplier Selection Metrics and Methodology, June 2004 A. Jain M.S. Process Capability Analysis for Tolerance Assignment in Discrete

Part Manufacturing, December 2003 N. Xu M.S. Multiple Attribute Utility Theory Analysis in Setup Plan

Evaluation, December 2003 S. Dwivedi M.S. Dimensionality Reduction in Data-Driven Process Modeling,

December 2003 R. Musa M.S. Simulation-based Tolerance Stack-Up Analysis in Machining, August 2003 K. Muthiah M.S. Diagnostic Factory Productivity Metrics, August 2003 N. Rapur M.S. Treatment of Data With Missing Elements in Process Modeling,

August 2003 M. Doshi M.S. Development of Productivity Linked Activity Based Costing

Methodology, August 2002 (Co-advise with J. P. Dismukes) S. Maloo M.S. A Rule-based Approach to Quadrilateral Mesh Generation,

December 2001 R. Kothamasu M.S. Adaptive Mamdani Fuzzy Model: An Empirical Data Analysis and

Modeling Tool, August 2001. G. Bandekar M.S. Development of a Self Locking Flex Plate, August 2001 (Co-advise

with N. Naganathan and M. Pourazady). S. Sheoran M.S. A Decision Support Tool and an Internet Strategy for Supply Chain

Operations Reference (SCOR) Model, May 2000. M. Uppal M.S. A Product Driven Approach to Manufacturing Supply Chain

Design, May 2000. K. Bhura M.S. A Software Tool for Cutter Path Simulation and Product

Visualization, August 1999. Masters Project

H. Li Inspection Task Sequence Optimization based on Design Structure Matrix, December 2008.

N. Pujari Design of Optimal Architecture for Backpropagation Neural Networks, December 2001.

G. Bandekar Multi-Block Topology Creation for Two-Dimensional Mesh Generation, August 2001.

K. Kreais Automated Sidewall Calculation in Tire Design, August 2001. M. Razzak Developing a Software Tool for Applying Productivity

Improvement Methodology, May 2001. Y. C. Shiralkar Prediction of Temperature Profile of Cross Section in an

Amorphous PET Sample Subjected to a Source of Infra Red Radiation Using Fuzzy Logic, December 2000.

24

R. S. Bodhale Incorporating Overall Equipment Efficiency (OEE) Methodology into Simulation, December 2000.

N. C. Samant Web-based Integrated Manufacturing Laboratory: Web Page Development, December 2000.

I. Khan Web-based Integrated Manufacturing Laboratory: Data Repository and Message Board, December 2000.

J. Chen MillSim: A Milling Simulation Software Tool, December 2000. Senior Design Projects

1. Evenflo Child Gate Design, Michael Patton, Christian Holden, Ryan Maynus, Winter & Spring 2002.

2. Simplification of Flock Adhesive Applications, Kumar Thillainayagam, Dave Kaufman, Jeff Krohn, and Rabie Mourad, Spring 2000.

3. Flammable Liquid Storage, Kevin Streck, Luis Barbery, and Nathan Knestrick, Fall 1999 (with Professor R. Bennet).

4. Quick Changeover for an Extrusion Line, Rodney Elchert, James Cook, and Paul Ostermyer, Fall 1999 (with Professor R. Bennet).

5. Material Handling System for Windshields, Greg Barnhart, Kourtney Oberhaus, and Yee-Mun Chew, Spring 1999.

6. End-Cap Closure, Robert Cook, Randy Rybarczyk, Gary Haddix, and Abdulla Saeed, Fall 1998.

7. Baler System Productivity, Amy Lukowski, John Cooke, Andrea Warnock, and Chan Yap, Fall 1998 (with Professor F. Chen).

8. Shredder System Productivity, Jason Wendell, John, Sanders, Matthew Franchetti, and Aimee Gontkovsky, Fall 1998 (with Professor F. Chen).

Others Post-Doc Supervision 3 Xiaoqin Ma August 2004 – April 2005 John Shi January 2002 – September 2004 Qi Su March 2001 – August 2001 Visiting Scholar Supervision 10 Xinghong Qin April 2015 – present Xiaojing Chen December 2014 – present Naiwei Zou July 2013 – June 2014 Xoabin Wei July 2013 – October 2013 Sheng Leng October 2012 – October 2013 Liang Hou October 2012 – December 2012 Peng Liu January 2012 – January 2013 Maoyun Guo September 2011 – September 2012 Peng Li January 2009 – January 2010 Tieming Chen July 2008 – August 2008 Undergraduate Research Supervision 9 Marcus Bryce June 2009 – September 2009

25

Jeremy Peter April 2009 – June 2009 Luke Bryce June 2008 – September 2008 James Penebaker July 2006 – September 2006 Mark Schmitz January 2006 – June 2006 David Patterson October 2004 – June 2005 Andy Jen January 2004 – March 2004 Patrick Schmitz January 2003 – March 2003 Aaron Dawson January 2002 – June 2002 Ph.D. Dissertation Committees 24 2014 – Steven Turek 2013 – Glenn Pietila, Ratnadeep Paul 2012 – Yan Chen, Yann Ferrand (College of Business), Edzel Lapira 2011 – Zekai He (College of Design, Architecture, Art, and Planning) , Lei Yang 2010 – Linxia Liao, Hemant Ramaswami, Tianyi Wang, Mohamed AbuAli 2008 – Koustubh Ashtekar 2007 – Yihong Yang (Worcester Polytechnic Institute) 2006 – Ming Li

2003 – Suqin Yao (Worcester Polytechnic Institute) 2002 – Paula J. Dempsey (University of Toledo) 2001 – Suhong Li, Sorin Neagu-Ventzel 2000 – Qingyu Zhang, Gabriel Dontu, Xiaodong Deng 1999 – Wojciech Grohman, Qi Su

M.S. Thesis Committees 42 2014 – Benson Issac 2013 – Chuan Jiang, Ishan Goswami 2012 – Abishek Balsamy Kamaraj, Tyler Skirtich, Wanchen Dai 2011 – Vishwesh Shauche, Feibai Zhu, Su Xu 2010 – Jingliang Zhang, Baisravan HomChaudhuri, C. David Vance 2009 – Ratnadeep Paul 2008 – Abhinav Abhinva, Raj Anand, Siddharth Rajmohan

2006 – Steven Turek, Jingjing Qian (College of Pharmacy), Rohit Subramanian 2005 – Shankar Saravanan 2004 – Srikanth Acharya, Prakash Velayutham, Navitha Parthasarathy 2003 – Sreeram Srinivasan, Sharad Kansara, Shrirang Mahajan, Yashpal Kowur 2002 – Hemant Ramaswami, Kuntal Kumar, Jaydeo Kinikar 2001 – Swati Bhargava, Khristi Viktoriany, Di Wu, Radu Coman, Mousalam Al-

AbdulRazzk 2000 – Balakrishnan Brijesh, Randall J. Bey 1999 – Salil Thakar, Hang-Chih Chang 1998 – Linley Mascarenhas, Yimin Yang, Jiejun Lu

SERVICE

Professional Organization

26

1. ASME MED Technical Committee on Manufacturing Processes, 2009 – 2012, 2012 – 2015, 2015 – 2018

2. North American Manufacturing Research Institute Scientific Committee, 2003 – 2006, 2009 – 2012 , 2012 – 2015

3. Society of Manufacturing Engineers Texas Tech University Student Chapter Vice Present, 1994 - 1995

University Committee

University of Cincinnati 1. University Research Council Physical Science and Engineering Subcommittee, 2004 -

2006 2. College of Engineering and Applied Science Honors and Awards Committee (Faculty),

2005 – 2013; Chair, 2011 – 2013 3. College of Engineering and Applied Science Bylaws Committee, 2010 – 2011 4. College of Engineering Eminent Scholar Search Committee, 2002 – 2004 5. School of Dynamic Systems Reappointment Promotion and Tenure (RPT) Committee

Chair, 2010 – 2014 6. School of Dynamics Systems Graduate Studies Committee, 2010 – present 7. School of Dynamic Systems Faculty Development Committee, 2009 – present 8. School of Dynamic Systems Director Search Committee, 2011 9. School of Dynamic Systems Reappointment Promotion and Tenure (RPT) Guideline

Writing Committee, 2010 10. ME Eminent Scholar Review Committee, 2010 11. MINE Faculty Search Committee, 2005, 2006 12. MINE Headship Review Committee, 2003 - 2004 13. MINE Department Computational Course Committee, 2002 - 2003 University of Toledo

14. University Research Task Force Committee, 2000 - 2001 15. College of Engineering Web-Assisted Learning Committee, 2000 - 2001 16. MIME Department Undergraduate IE Curriculum Committee, 1999 - 2001 17. MIME Department Manufacturing Initiative Committee, 1999 - 2000 18. MIME Department CAD/CAM Laboratory Committee, 1998 - 1999

Editorship and Advisory Board

1. Editorial Board, Applied Computational Intelligence and Soft Computing, 2011 – present 2. Editorial Advisory Board, Recent Patents on Computer Science, 2010 – present 3. Editorial Board, International Journal of Industrial and Systems Engineering, 2005 –

present 4. Advisory Board, International Journal of Advanced Manufacturing Technology, 2001 –

present 5. Associate Editor, Annotated Research Methods in Caribbean Research (Cook & Bastick

Ed.), 2009.

Conference Organization

27

1. Symposium Organizer, ASME International Manufacturing Science and Engineering Conference, June 27-July 1, 2016, Blacksburg, VA.

2. Symposium Organizer, ASME International Manufacturing Science and Engineering Conference, June 8-12, 2015, Charlotte, NC.

3. Symposium Organizer, ASME International Manufacturing Science and Engineering Conference, June 9-13, 2014, Detroit, MI.

4. Symposium Organizer, ASME International Manufacturing Science and Engineering Conference, June 10-14, 2013, Madison, WI.

5. International Program Committee, The 9th International Conference on Service Systems and Service Management, July 2-4, 2012, Shanghai, P. R. China.

6. Symposium Organizer, ASME International Manufacturing Science and Engineering Conference, June 4-8, 2012, Notre Dame, IN.

7. Symposium Organizer, ASME International Manufacturing Science and Engineering Conference, June 13-17, 2011, Corvallis, OR.

8. Symposium Organizer, ASME International Manufacturing Science and Engineering Conference, October 12-15, 2010, Erie, PA.

9. Symposium Organizer, ASME International Manufacturing Science and Engineering Conference, October 4-7, 2009, West Lafayette, IN.

10. Advisory Committee, International Conference on Advances in Manufacturing Engineering -2007, October 24-26, 2007, Manipal, India.

11. Symposium Organizer, ASME International Mechanical Engineering Congress and Exposition, November 5-11, 2005, Orlando, FL.

12. Paper Judge, The Sixth Annual University Synergy Program, September 15-18, 2003, Flint, Michigan.

13. International Advisory Board, the 2nd International Conference on Responsive Manufacturing, June 26-28, 2002, Gaziantep, Turkey.

14. International Program Committee, IEEE 2001 International Conference on Systems, Man, and Cybernetics, October 7-10, 2001, Tuscon, Arizona.

15. Workshop Panelist, Seventeenth International Joint Conference on Artificial Intelligence, August 4-10, 2001, Seattle, Washington.

16. Session Chair, Flexible Automation and Intelligent Manufacturing Conference, June 26-28, 2000, College Park, MD. Paper Review

Journal 1. Advances in Engineering Software 2. Annals of Operations Research 3. Applied Mathematical Modelling 4. Artificial Intelligence for Engineering Design, Analysis and Manufacturing 5. Artificial Intelligence in Medicine 6. Artificial Intelligence Review 7. ASME Journal of Computing Information Science in Engineering 8. ASME Journal of Electronic Packaging 9. ASME Journal of Manufacturing Science and Engineering 10. ASME Journal of Mechanical Design 11. Canadian Biosystems Engineering

28

12. Computers and Industrial Engineering 13. Computer Applications in Engineering Education 14. Computer Methods and Programs in Biomedicine 15. Data and Knowledge Engineering 16. Electronic Journal of Energy & Environment 17. Engineering with Computers 18. European Journal of Industrial Engineering 19. European Journal of Operational Research 20. Fuzzy Sets and Systems 21. IEEE Signal Processing Letters 22. IEEE Transactions on Automation Science and Engineering 23. IEEE Transactions on Biomedical Engineering 24. IEEE Transactions on Evolutionary Computing 25. IEEE Transactions on Fuzzy Systems 26. IEEE Transactions on Industrial Informatics 27. IEEE Transactions on Instrumentation and Measurement 28. IEEE Transactions on Neural Networks 29. IEEE Transactions on Reliability 30. IEEE Transactions on Semiconductor Manufacturing 31. IEEE Transactions on Systems, Man, and Cybernetics: Part A 32. IEEE Transactions on Systems, Man, and Cybernetics: Part C 33. IIE Transactions 34. International Journal of Advanced Manufacturing Technology 35. International Journal of Computer Applications in Technology 36. International Journal of Information Technology & Decision Making 37. International Journal of Machine Tools and Manufacture 38. International Journal of Manufacturing Science and Technology 39. International Journal of Manufacturing Technology and Management 40. International Journal of Modeling and Simulation 41. International Journal of Neural Systems 42. International Journal of Production Economics 43. International Journal of Production Research 44. Journal of Cleaner Production 45. Journal of Engineering Design 46. Journal of Engineering Design and Automation 47. Journal of Engineering Manufacture 48. Journal of Healthcare Engineering 49. Journal of Intelligent Manufacturing 50. Journal of Manufacturing Systems 51. Journal of Materials Processing Technology 52. Knowledge-Based Systems 53. Mathematical Problems in Engineering 54. Methods of Information in Medicine 55. Robotics and Autonomous Systems 56. Robotics and Computer-Integrated Manufacturing 57. Recent Patents in Computer Science

29

58. Soft Computing 59. SRX Engineering 60. Supply Chain Management: An International Journal 61. Technological Forecasting and Social Change Conference

62. 2015 ASEE Annual Conference and Exposition 63. 2014 IEEE Frontiers in Education Conference 64. 2014 North American Manufacturing Research Conference 65. 2013 Frontier in Education Conference 66. 2013 North American Manufacturing Research Conference 67. ICSSM 2012: The 9th International Conference on Service Systems and Service

Management 68. 2012 North American Manufacturing Research Conference 69. 2011 North American Manufacturing Research Conference 70. 2011 ASEE Annual Conference and Exposition 71. 2010 North American Manufacturing Research Conference 72. 2009 ASME Manufacturing Science and Engineering Conference 73. 2008 Third World Congress on Engineering Asset Management and Intelligent

Maintenance System Conference 74. 2008 International Conference on Manufacturing Science & Engineering 75. 2007 ASME International Mechanical Engineering Congress and Exposition 76. 2006 ASME International Mechanical Engineering Congress and Exposition 77. 2006 IEEE International Conference on Fuzzy Systems 78. 2004 North American Manufacturing Research Conference 79. 2003 North American Manufacturing Research Conference 80. 2002 Asian Control Conference 81. 2002 North American Manufacturing Research Conference 82. 2000 Japan-USA Symposium on Flexible Automation 83. 2000 International Joint Conference on Neural Networks 84. 2000 ASME Design Automation Conference 85. 1999 ASME Design Automation Conference 86. 1999 ASME Symposium on Decision Making in Design and Manufacturing 87. 1995 ASME Symposium for Life Cycle Engineering Book

88. Applied Statistics and Probability for Engineers, Wiley, 2010. 89. Simulation in Practice: An Introduction, Prentice Hall, 2007. 90. A Simulation Book Proposal, Prentice Hall, 2007. 91. Introduction to Operations Research, McGraw-Hill, 2006. 92. Simulation Modeling and Arena, John Wiley & Sons, 2005. 93. A Quick Course for Statistical Process Control, Prentice Hall, 2002. 94. Statistical Tools for Continuous Improvement, Prentice Hall, 2002. 95. Advanced Tolerancing Techniques, H.-C. Zhang (editor), Wiley, 1997. 96. Fuzzy Logic and Intelligent Systems, H. Li and M. Gupta (editor), Kluwer Academic

Publishers, 1995.

30

External Evaluator

1. Promotion, Department of Manufacturing and Industrial Engineering, University of Texas Rio Grande Valley, Edinberg, TX, 2015

2. Promotion, Department of Systems Science and Industrial Engineering, Binghamton University, Binghamton, NY, 2014.

3. Promotion, Department of Systems Science and Industrial Engineering, Binghamton University, Binghamton, NY, 2012.

4. Tenure and Promotion, Department of Mechanical Engineering, University of Texas at San Antonio, San Antonio, TX, 2012.

5. Tenure and Promotion, School of Engineering and Technology, Asian Institute of Technology, Klong Luang, Pathumthani, Thailand, 2011.

6. Promotion, Department of Mechanical Engineering, University of Texas at San Antonio, San Antonio, TX, 2011.

7. Tenure, School of Engineering, Fairfield University, Fairfield, CT, 2001. 8. Ph.D. Dissertation, “Optimization of 3-D Surface Topography in Hard Turning,”

Department of Mechanical, Industrial, and Manufacturing Engineering, University of Toledo, Toledo, OH, 2002.

9. Ph.D. Dissertation, “Contributions to Fuzzy Theory and Some of Its Engineering Applications,” Department of Mathematics, Alagappa University, Tamil Nadu, India, 2001.

Consulting

1. Procter & Gamble, 2006 – 2012 2. GE Aviation, 2007 – 2009 3. Cincinnati Children’s Hospital, 2009 4. Transfreight LLC, 2005 5. VerTech LLC, 2000 – 2005 6. Wyandot, 2003 – 2004 7. T. Marzetti, 2002 8. Kraft Foods, 2002 9. Rudolph Foods, 2000 – 2001

Others

1. National Science Foundation SES electronic proposal review, 2016 2. National Science Foundation SES electronic proposal review, 2015 3. Research Grants Council of Hong Kong external proposal reviewer, 2012 4. Swiss National Science Foundation external proposal reviewer, 2012 5. Research Grants Council of Hong Kong external proposal reviewer, 2010 6. National Science Foundation CMMI proposal review panel, December, 2008 7. Research Grants Council of Hong Kong external proposal reviewer, 2008 8. National Science Foundation CMMI proposal review panel, May 2007 9. Research Grants Council of Hong Kong external proposal reviewer, 2006 10. Ohio Aerospace Institute Collaborator Concept Definition Team, 2002 – 2005 11. National Science Foundation DMII proposal review panel, April 2004

samuel h. huang summary - mechanical engineering resume 2015.pdf · environmentally conscious...

Documents