s1v2 dnp config

MiCOM S1.V2

DNP 3.0 Configurator

Software Version 2.13

User Guide

S1V2DNP/EN HI/A11

IEC Configurator S1V2DNP/EN HI/A11 MiCOM S1V2

MiCOM S1V2 DNP 3.0 CONFIGURATOR

FOR MiCOM PX40

Date: 26th October 2006 Software Version: 2.13

S1V2DNP/EN HI/A11 IEC Configurator

MiCOM S1V2


(IE) 1

CONTENTS

1. MICOM PX40 SETTING SOFTWARE (S&R COURIER) 3 1.1 How to use S&R-Courier 3 1.1.1 Create a new or default IED DNP 3.0 File 3 1.1.2 Set-up IED communication 4 1.1.3 Create a new communication set-up 4 1.1.4 Open a connection 5 1.1.5 Extract a DNP 3.0 File from an IED 5 1.1.6 Save a DNP 3.0 configuration file 6 1.1.7 Save a DNP 3.0 File with a new name or in a new location 6 1.1.8 Download a modified DNP 3.0 File to an IED 6 1.1.9 Configure DNP 3.0 settings 7 1.1.9.1 Point configuration 7 1.1.9.1.1 Binary inputs 8 1.1.9.1.2 Binary outputs 9 1.1.9.1.3 Counters 9 1.1.9.1.4 Analogue inputs 9 1.1.9.2 Integer scaling 10 1.1.9.3 Default variation 11 1.1.10 Print IED DNP 3.0 Files 11 1.1.11 Set IED active group 11 1.2 Menu and toolbar 12 1.2.1 The menu functions 12 1.2.1.1 File menu 12 1.2.1.2 Edit menu 14 1.2.1.3 View menu 15 1.2.1.4 Device menu 15 1.2.1.5 Tools menu 16 1.2.1.6 Window menu 17 1.2.1.7 Help menu 17 1.2.2 The toolbar 18

S1V2DNP/EN HI/A11 IEC Configurator (IE) 2

MiCOM S1V2


(IE) 3

1. MICOM PX40 SETTING SOFTWARE (S&R COURIER)

To access the Px40 Settings & Records module, click on

For MiCOM Px40 devices supporting the DNP 3.0 protocol, S&R-Courier enables you to connect to the MiCOM Px40 device front port, retrieve and edit its settings and send the modified file back to a MiCOM Px40 device.

Although each device can have different settings, the tabulated view presents every DNP 3.0 Point to the user in a uniform style, showing the permissible settings available.

1.1 How to use S&R-Courier

The main functions available within the DNP 3.0 Configurator Px40 S&R module are:

• Create a new or default IED DNP 3.0 File

• Set-up IED communication

• Run on-line communication

• Extract a DNP 3.0 File from an IED

• Save a DNP 3.0 configuration file

• Download a modified DNP 3.0 File to an IED

• Configure DNP 3.0 settings

• Print IED DNP 3.0 Files

• Set IED active group

1.1.1 Create a new or default IED DNP 3.0 File

1.

2.

3.

Choose New... from the File menu.

Choose DNP File… and the New DNP 3.0 File dialog is displayed.

Select the required device type from the Device Type pull-down list. The model numbers for the device type are displayed.


MiCOM S1V2

4. Select the model number from the Model Number list or use the Advanced button to

construct the required model number.

NOTE: If duplicate model numbers exist, the Header details will give version numbers and other identifying information. Also, the appropriate language is displayed in the Language pull-down list, showing the language of this file.

5.

6.

1.

2.

3.

1.

2.

If more than one language type is supported, the Language pull-down list will display the languages for this device type.

Click on the OK button. A new DNP 3.0 File based on the selected model is generated.

1.1.2 Set-up IED communication

Choose Communications Setup from the Device menu. The Communications Setup dialog is displayed.

If the configuration you want to use already exists, select it from the Scheme pull-down list and click on the OK button.

If the configuration you want to use does not exist, create a new communications setup.

1.1.3 Create a new communication set-up

Choose Communications Setup from the Device menu. The Communications Setup dialogue box is displayed.

Select the Serial port to which the device will be connected from the COM Port pull-down list or the Modem or Ethernet options can be selected for a remote location.


(IE) 5

3.

4.

5.

6.

7.

1.

2.

3.

4.

5.

1.

2.

3.

Select the Baud rate and the appropriate Framing setting or if using a modem select the Modem tab and select Modem in the Connection option box. Press Configure… to enter the phone number to dial into via the modem.

Select the Transaction Values tab and complete the fields on this tab. Refer to the Transaction Values help for information on these fields.

When you have completed the configuration details, click on the Save As button. The Save Setup dialog is displayed.

Enter a descriptive name for this setup in the Save Communications Parameters As field and click on the OK button. The setup is saved and the Communications Setup dialogue box is redisplayed.

Click on the OK button to configure the communications port.

1.1.4 Open a connection

Choose Open Connection… from the Device menu.

If known, enter the device address in the Address field, otherwise click on the Browse button to scan available devices.

Click on the OK button to open the connection, the Password dialog is displayed.

Enter the password. This is four characters long and in the range A-Z.

Click OK. If the password is valid the connection will be made and the On-line window will be displayed.

NOTE: If the device is set to the default password the Enter Password dialog is not required for enhanced DNP 3.0 devices.

1.1.5 Extract a DNP 3.0 File from an IED

The following procedure can be followed if a DNP 3.0 File is currently open or not open.

Open a connection to the required device.

Choose Extract DNP Configuration… from the Device menu. An upload confirmation dialog is displayed.

Select Yes to upload the current DNP configuration.

If changes have not been made to an open DNP 3.0 File a warning box is first displayed. The warning box asks if changes to the file should be saved before closing.


MiCOM S1V2

4.

5.

1.

2.

3.

4.

1.

2.

3.

4.

5.

6.

The DNP 3.0 File Transfer progress box is displayed, showing the progress of this operation. Once complete, an information box is displayed.

Click OK to continue and the DNP 3.0 File is displayed.

1.1.6 Save a DNP 3.0 configuration file

To save a DNP 3.0 File with the same name, choose Save from the File menu.

1.1.7 Save a DNP 3.0 File with a new name or in a new location

Choose Save As from the File menu. The Save DNP File As dialogue box is displayed.

Type the new file name in the File name field or change the location in the ‘Save in’ field.

Edit the Header field as required.

Click on the Save button. The DNP 3.0 File is saved.

1.1.8 Download a modified DNP 3.0 File to an IED

Prepare the required DNP 3.0 File by either: – Retrieving the DNP 3.0 File from the device or: – Opening a DNP 3.0 File held on disk, then editing it accordingly.


Choose Download DNP Configuration… from the Device menu. A download confirmation dialog is displayed.

Select Yes to download the current DNP configuration to the IED.

The DNP 3.0 File Transfer progress box is displayed, showing the progress of this operation. Once complete, an information box is displayed.

Click OK to continue.


(IE) 7

1.1.9 Configure DNP 3.0 settings

The relay operates as a DNP 3.0 slave device and S&R Courier allows configuration of the relay’s DNP 3.0 response. The configuration data is uploaded from the relay to the PC in a block of compressed format data and downloaded to the relay in a similar manner after modification. The modified DNP 3.0 configuration takes effect in the relay after the download is complete.

The DNP 3.0 File for an IED will vary depending on the implementation of the IED. The DNP 3.0 Files developed for the original DNP 3.0 implementation in Px40 relays are backwards compatible using MiCOM S1 version 2.13. However the appearance of any DNP 3.0 File using MiCOM S1 version 2.13 will look different to viewing the same file with an earlier version of S1.

The DNP 3.0 Files used in the enhanced DNP 3.0 implementation for Px40 relays have additional functions and settings available. These files are only configurable using MiCOM S1 version 2.13 and later.

Configuration of the DNP 3.0 Files for the enhanced implementation is detailed in the following sections. The program provides 3 tabs for the functions of Point Configuration, Integer Scaling and Default Variation. Each tab allows navigation and support for additional functions per tab as follows.

1.1.9.1 Point configuration

The Point Configuration tab contains the Binary Inputs, Binary Outputs, Counters and Analogue Inputs tabulated views. Each tab contains relevant configuration data to that group. The point configurations for all groups include a Master Points List and a Configured Points List.

The Master Points List contains all available points per device type (e.g. P145). The list can be ordered either by point number or alphabetically by Description. To order the list by point number the mouse pointer can left click the MPI column heading. To order the list alphabetically the mouse pointer can left click the Description column heading.

The Configured Points List is ordered by the Configured Point Index (CPI) and contains only configured points. Each corresponding MPI number, description and any available settings are included for every point. The maximum number of points that can be included in the Configured Point List is equal to the total number of points listed in the Master Point List.

A -- Separator -- point is provided in the Master Points List to allow custom tables to be created and could be used to match the mappings of commissioned systems. This will also aid in producing consistent points mappings between different products, allowing data to be located at the same point in all devices. The Separator will return a zero value dependent on the variation requested and will be flagged as offline.

The “Add”, “Remove”, “Add All” and “Remove All” buttons are used for the addition or removal of points from the Master Point List onto the Configured Point List. The “Add” button will add the selected Master Point into the Configured Point List in the order added or at the highlighted position. A double click with the left mouse button on a selected point in the Master Point List will also add the point into the Configured Point List. The “Remove” button will remove the highlighted point in the Configured list.

The “Move Up” and “Move Down” buttons are used to reposition the CPI for the selected point in the Configured list by one position.


MiCOM S1V2

1.1.9.1.1 Binary inputs

The Master Points List is a dynamic list and will display all unfitted points in grey italics based on the IED model number and hardware. Below the list is a Hide Unfitted Points check box and by selecting the check box will remove all unfitted points from the Master Point List. Unfitted points have a similar use as Separator points.

The Remove Unfitted button is used to remove all unfitted points from the Configured Points List.

A Class column is available in the Configured Points List which displays the configured class setting for every configured point in the list. The class setting is selected in the Class of Data Point list as Disabled, Class 1, Class 2 or Class 3.

Alternatively a right-click menu is displayed if the Configured Points List is currently selected and a mouse button right-click is made. Selecting an item in this list will assign all configured points to the same class.

A Source column is shown in the Configured Points List and displays a description type from where each point is generated.


(IE) 9

1.1.9.1.2 Binary outputs

The Binary Outputs only includes the selection of points and ordering functions.

1.1.9.1.3 Counters

The configuration of the Counters includes two settings for each point added to the Configured Points List. The Class column and setting is the same as described for Binary Inputs section 0.

A Frozen check box allows each point to be selected as frozen or not frozen.

Alternatively a right-click menu is displayed if the Configured Points List is currently selected and a mouse button right-click is made. Selecting an item in the top list will assign all configured points to the same class. Selecting an item in the bottom list will check or uncheck the Frozen box for every point.

1.1.9.1.4 Analogue inputs

The configuration of the Analogue Inputs includes Class and Deadband settings for each point added to the Configured Points List. The Class column and setting is the same as described for Binary Inputs section 0. Each point will also display a Scaling Group and is described in further detail in the Integer Scaling section 1.1.9.2.


MiCOM S1V2

The Deadband settings are shown below the Configured Points List. The deadband value is entered in the Deadband textbox and the corresponding unit is displayed in the Units field.

The deadband value can be set in terms of a Primary, Secondary or Normalised value as selected in the Display list. For correct scaling the scaling factors for each Analogue Input point must be uploaded from the relay as part of the DNP 3.0 File. S&R-Courier will convert the deadband values back to normalised values before downloading them to the relay and saving the file. The scaling factors are determined by the CT and VT ratios.

The relay will use the normalised values (based on 1A/110V) during the analogue event scanning process. The deadband scanning will not account for changes to the CT/VT ratios made after the DNP configuration has been downloaded to the relay.

A right-click menu is displayed if the Configured Points List is currently selected and a mouse button right-click is made. Selecting an item in the top list will assign all configured points to the same class. Selecting an item in the bottom list will assign all configured points to display the same scaling display value.

1.1.9.2 Integer scaling

The Integer Scaling displays the Group Name and Scaling Factor for every analogue group. Selecting a group name in the list will make the Scaling Factor available for editing. The Scaling Factor of each group will scale every point data in the Analogue Inputs configured list corresponding to that group.


(IE) 11

1.1.9.3 Default variation

The Default Variation tab displays the Objects for each available group. The default variation defines which format is assigned to the Object. The Default Variation is assigned from a drop-down menu displaying the available variations for that Object.

1.1.10 Print IED DNP 3.0 Files

1. Choose Print from the File menu or click the button. The Windows’ Print Setup dialog is displayed.

button to obtain context sensitive help. 2. Use F1 or the

1.1.11 Set IED active group

1.

2.


Highlight the group to be activated.


MiCOM S1V2

3. Select Activate Group from the Device menu.

The highlighted group is now the active group and will be displayed in red until another group is made active.

1.2 Menu and toolbar

1.2.1 The menu functions

The main functions available within the Px40 S&R-Courier menu are:

• File

• Edit

• View

• Device

• Tools

• Window

• Help

1.2.1.1 File menu

The menu varies if a file is open or closed.

FILE OPENED

Open

Events File…

Displays the Open Events File dialogue box, enabling you to open an events file.

Error Log…

Displays the Open Error Log File dialogue box, enabling you to open an error log file.

Close

Close the current file. If unsaved changes have been made you will be asked if you wish to save the file.


(IE) 13

Save

Save the current file under the name it was last saved as. If it has not already been saved, the Save As dialog will be displayed.

Save As…

Display the Save DNP File As dialog, enabling you to save the current file under a new name or in a new location.

Difference…

Display the Open DNP File dialog, enabling you to select a DNP 3.0 File stored on disk. This function compares the open DNP 3.0 File with another stored on disk. The number of differences is displayed on screen. If there is any difference a comparison report displaying differences between the two files is generated. This report format is a text file (*.txt) and can be saved and edited with a text editor.

Export…

Display the Save As dialog, enabling you to type the new file name in the ‘File name’ field or change the location in the ‘Save in’ field. This function outputs the DNP 3.0 File configuration into a spreadsheet format for ease of cross-reference or printing. This file is saved in Comma Separated Values (*.csv) format.

Print…

Display the Print dialog, enabling you to print the configured settings.

Page Setup

Display the Page Setup dialog, enabling you to set the page size and layout options.

Top Margin

Distance from the top of the paper to the top of the print area.

Bottom Margin

Distance from the bottom of the paper to the bottom of the print area.

Left Margin

Distance from the left of the paper to the left of the print area.

Right Margin

Distance from the right of the paper to the right of the print area.

Units of Measurement

Select the Inches or Centimetres option box.

Exit

Quit the application.

FILE CLOSED

New

Displays the New Settings File dialogue box, enabling you to create a new settings or DNP 3.0 File.

Settings File...

Displays the New Settings File dialogue box, enabling you to open an application settings file.

DNP File…

Display the DNP File dialog box, enabling you to create a DNP 3.0 File.


MiCOM S1V2

Open

Displays the existing file dialogue box, enabling you to open an existing file.

Settings File...

Displays the Open Settings File dialogue box, enabling you to open an application settings file.

DNP File…

Display the Open DNP File dialog box, enabling you to open a DNP 3.0 File.

Events File…

Displays the Open Events File dialogue box, enabling you to open an events file.

Error Log…

Displays the Open file dialogue box, enabling you to open an error log file.

Page Setup

Displays the Page Setup, enabling you to modify the margins (top, bottom, left, right) and the units of measurement (cm or inches).

Recent File

A list of the most recently opened files.

Exit

Quit the application.

1.2.1.2 Edit menu

Copy All

Copy all the configured settings to the clipboard.


(IE) 15

1.2.1.3 View menu

Toolbar

Show/hide the toolbar.

Status Bar

Show/hide the status bar.

1.2.1.4 Device menu

Communications Setup...

Displays the Communication Setup dialogue box, enabling you to select or configure the communication settings.


MiCOM S1V2

Open Connection...

Display the Open Connection dialog, enabling you to send and receive data from the connected relay.

Change Address by Serial #… (number)

Displays the Change Device Address dialogue box.

Extract DNP Configuration…

Extract the DNP 3.0 configuration from an IED.

Download DNP Configuration…

Download the modified DNP 3.0 configuration from an open file to an IED.

1.2.1.5 Tools menu

Select Language…

Switch the S&R-Courier display between available languages.


(IE) 17

1.2.1.6 Window menu

Cascade, tile horizontally, tile vertically and arrange icons commands are available to change the layout of the display windows. The Window menu also allows swapping between open windows.

1.2.1.7 Help menu

Help Topics

Displays the Settings help table of contents.

About Settings...

Displays version and copyright information about S&R-Courier.


MiCOM S1V2

1.2.2 The toolbar

New

Creates a new settings file based on the relay model.

Open

Opens an existing settings file.

Save

Save the active document.

Copy

Copies the selection and places it on the clipboard.

Paste

Inserts the clipboard contents.

Print

Display the Windows Print dialog, enabling you to print the current file.

Help

Displays information about the program, version number and copyright.

AREVA T&D's Automation & Information Systems Business www.areva-td.com T&D Worldwide Contact Centre online 24 hours a day: +44 (0) 1785 25 00 70 http://www.areva-td.com/contactcentre/

Pu

blic

atio

n:

S1

V2

DN

P/E

N H

I/A

11

s1v2 dnp config

Documents