rx2 ledgine

7/24/2019 RX2 LEDGINE

1/12

RX2 LEDGINE (160 LED's ) (RX2160): Products: LED: Roadway

Specifications

APPLICATIN!: The RX2 is the perfect LED solution forroadway lighting and is the ideal luminaire for both new andretrofit installations. Other application locations includeresidential streets! city streets! campuses and par"ing lots.The performance! energy sa#ings! and uniformity of thisluminaire allow for it to be a one to one replacement forstandard $%D cobra&head style luminaires.

CN!TR"CTIN: 'ontaining no mercury or other ha(ardouschemicals! the RX2 is Ro$S compliant and fully recyclable.The housing is constructed of low copper die&cast aluminumwith a traditional cobra&head style! low profile and E)*. Thehousing is a uni+ue thermal dissipating design with wideangular channels that allow for natural remo#al of dirt anddebris. Two tool&less clips allow for access to the dri#er andwiring compartment. The hinged door is remo#able forser#iceability and upgradability. The LED,%-E has a precisiondesigned! inection molded optic plate behind a singletempered glass lens. The lens and lens frame gas"ets arerobotically applied. The LED optics chamber is %)// rated.The mounting detail will accept a 0.21 to 2.1 hori(ontaltenon or arm. There is an option for a 3/45 rotatable twistloc" photocell receptacle. * bubble le#el is built in as well asmounting steps that allow for a 615 to &15 tilt! in 2.15increments. There is a dual clamp mounting system.7ounting clamps are made of $SL* steel and are (inc plated.

8asteners are made of stainless steel. * large terminal bloc"is directly in line with incoming power wires and accepts upto / gauge wire.

LED !PECI#ICATIN!: Refer to %ES files for energyconsumption and deli#ered lumens for each option. 9ased oninsitu thermal testing and data from )hilips Lumileds and)hilips *d#ance! life e:pectancy can be e:pected to reach;4!444 hours 4 lumen maintenance ? 215'@ and044!444 hours for the LED array and dri#er respecti#ely. The)hilips LED,%-E uses )hilips Lumileds Rebel LEDs. 'olortemperatures a#ailable are *-S% 9ins 3444A! B444A! and1>44A ''T. 7ultiple distributions are a#ailable including Type

2! 3! B and 1.ELECTRNIC DRI$ER: The two dri#ers that are included inan RX2 are the )hilips *d#ance X%T*-%C7 LED dri#ers andthey are a#ailable in single or multiple dri#e current options>*' or 3B>&B;4*'. %nput fre+uency is 14&/4$(and all X%T*-%C7 dri#ers are Ro$S compliant. The dri#ers


2/12

ha#e 3" surge suppression built in! 04" is an additionaloption. The dri#ers are installed on the enclosure door!"eeping it mechanically separated from the canopy whichdoubles as the LED array heat sin". This allows the dri#erscase temperature to remain well below the ma:imum ratedtemperature gi#ing the dri#ers a 044!444 hour life.

#INI!%: Thermoset polyester powdercoat is electrostaticallyapplied after a fi#e&stage con#ersion cleaning process andbonded by heat fusion thermosetting. Laboratory tested forsuperior weatherability and fade resistance in accordancewith *ST7 9&00>&/B and *-S%F*ST7 ,13&>> specifications.)owdercoat is 3.4 & /.4 mil thic"ness

PTIN!: There is an option for a 3/45 rotatable twist loc"photocell receptacle. Optional surge suppression currentrating a#ailable for the RX2 is 04 " 9%L. Enclosure for surgesuppression de#ice is constructed of high temperature!flameproof material with an ;15' ma:imum surface

temperature rating. The de#ice consists of a thermallyprotected transient o#er#oltage circuit and is designed foruse with uni#ersal #oltage ballasts and dri#ers. The )hilipsDynadimmer is an option with the RX2. There are G standardfactory set dimming schedules a#ailable. * custom scheduleis a#ailable by contacting the factory. Hireless dimmingoptions are also a#ailable! contact the factory for details.

IP RATING: %)// Dust&tight and sealed against direct ets ofwater. -o %ngress of dust. Hill withstand 2/.B gallons ofwater per minute. Hater proected in powerful ets shall notenter the enclosure in harmful +uantities. The LED opticschamber is %)// rated.

CERTI#ICATIN!: ETL listed to C.S. safety standards for wetlocations. cETL listed to 'anadian safety standards for wetlocations. CL;>14 and CL01G; compliant. 7anufactured to%SO G440244; Standards. ibration tested to *-S% '03/.30for 9ridge *pplications.

&ARRANT: 1 year e:tended warranty

&dt: 01.;I

%*+t : B.;I

L*,+t: B4.21I

EPA: .;2 s+ ft

-a./ &*+t: 32 lbs

IE!NA Casscato,s: 8ull 'utoff

Ordering ,uide

E.a3*: RX2160 T1 A 2 & A 4 N N ! N

Product Cod* RX20/4 RX2 LED,%-E


3/12

T2 0.21I to 2I tenon

#,s

* 9lac"

9 Hhite

$ 9ron(e

% ,ray

3tcs 2 Type %%

3 Type %%%

B Type % 1 Type

Coor T*3*ratur* H 3444A

- B444A

' 1>44A

$ota+* * 024&2>> *'

9 3B>&B;4 *' K2

Dr5* Curr*,t 1 134 m*

Poto Co,tro - -one

R Twist&loc" Receptacle

D,+ Co,tro - -one

D* B $rs 21 Reduction

D9 B $rs 14 Reduction

D' B $rs >1 Reduction

DD / $rs 21 Reduction

DE / $rs 14 Reduction

D8 / $rs >1 Reduction

D, ; $rs 21 Reduction

D$ ; $rs 14 Reduction

DM ; $rs >1 Reduction

H Hireless K0!ur+* !u33r*sso, S Standard 9uilt %n 3"

* *dditional 04" 9%L

%ous* !d* !*d - -one

$ $ouse Side Shield

K0 'onsult 8actory for wirless option

K2 'an not ha#e 3B>&B;4 with a Dynadimmer Dimming


4/12

Option


5/12

Podcast

hours 4 lumen maintenance ? 215'@. The )hilipsLED,%-E uses )hilips Lumileds Rebel LEDs. 'olortemperatures a#ailable are *-S% 9ins 3444A! B444A! and1>44A ''T. Two distributions are a#ailable including Type 3and 1.

ELECTRNIC DRI$ER: The dri#er included in the CX0 is the)hilips *d#ance X%T*-%C7 LED dri#er and is a#ailable in singleor multiple dri#e current options >*' or3B>&B;4*'. %nput fre+uency is 14&/4$( and all X%T*-%C7dri#ers are Ro$S compliant. The dri#er has 3" surgesuppression built in! 04" is an additional option.

#INI!%: Thermoset polyester powdercoat is electrostaticallyapplied after a fi#e&stage con#ersion cleaning process andbonded by heat fusion thermosetting. Laboratory tested forsuperior weatherability and fade resistance in accordance

with *ST7 9&00>&/B and *-S%F*ST7 ,13&>> specifications.)owdercoat is 3.4 & /.4 mil thic"ness

ELECTRICAL A!!E-L: Standard Two capti#e screws holddown the pod co#er. *ssembly is remo#able to allow accessto the terminal bloc". The fi:ture comes standard with aterminal bloc" that accepts up to / ,.*. wire. uic"connects are included to easily disconnect the electricalassembly from the wireway. Options There is an option for atwist loc" photocell receptacle or button eye. Optional surgesuppression rating a#ailable for the RX0 is 04 " 9%L.Enclosure for surge suppression de#ice is constructed of hightemperature! flameproof material with an ;15' ma:imum

surface temperature rating. The de#ice consists of athermally protected transient o#er#oltage circuit and isdesigned for use with uni#ersal #oltage ballasts and dri#ers.

CNTRL!: The )hilips Dynadimmer is an option with thisfi:ture. There are G standard factory set dimming schedulesa#ailable. See specification sheet for details. * customdimming schedule is a#ailable by contacting the factory.Hireless dimming options are also a#ailable! contact thefactory for details.

IP RATING: %)// Dust&tight and sealed against direct ets ofwater. -o %ngress of dust. Hill withstand 2/.B gallons ofwater per minute. Hater proected in powerful ets shall not

enter the enclosure in harmful +uantities. The LED opticschamber is %)// rated.

CERTI#ICATIN!: ETL listed to C.S. safety standards for wetlocations. cETL listed to 'anadian safety standards for wetlocations. CL;>14 and CL01G; compliant. ibration testedto *-S% '03/.30 for -ormal *pplications. 7anufactured to%SO G440244; Standards.


00000000000000 00000000000000

10000000000000 0

0


6/12

&dt: 0;I


7/12

2 *llen $ead

3tcs 2 Type %%

3 Type %%%

B Type %

1 Type

Coor T*3*ratur* H 3444A

- B444A

' 1>44A

$ota+* * 024&2>> *'

9 3B>&B;4 *' KB

Dr5* Curr*,t 1 134 m* 7 7ulti Tap 44m*@ K0!2

Poto Co,tro E 024 *' 9utton Eye

$ 24;F2B4F2>> *' 9utton Eye

- -one

R Twist&loc" Receptacle

D,+ Co,tro - -one

D* B $rs 21 Reduction

D9 B $rs 14 Reduction

D' B $rs >1 Reduction

DD / $rs 21 Reduction DE / $rs 14 Reduction

D8 / $rs >1 Reduction

D, ; $rs 21 Reduction

D$ ; $rs 14 Reduction

DM ; $rs >1 Reduction

H Hireless K3

!ur+* !u33r*sso, S Standard 9uilt %n 3"

* *dditional 04" 9%L

%ous* !d* !*d - -one

$ $ouse Side ShieldK0 Only *#ailable in CX0* &ships at 134m*.

K2 -o dimming or 3B>&B;4! a#ailable with 7

K3 'onsult 8actory for wirless option

KB'an not ha#e 3B>&B;4 with a Dynadimmer DimmingOption


8/12

Co,t*3orary (C!104): Co*rca La,dsca3*: L,* $ota+*: Post To3s

Addto,a I,orato,

Specifcation Sheet

Line Art

Application Shots

Product Shots

IES Files

Specifications

%"!ING: 'ontemporary round fitter is constructed of 31/ $7 $igh&Strength!Low&'opper cast aluminum. $ea#y cast aluminum post fitter utili(ing either ane:ternally slip&fit 2&3F; tenon or internally slip&fits a B pole. 9lac" cadmiumstainless steel allen head set screws for mounting tenon &/B and *-S%F*ST7 ,13&>>specifications. 8or larger proects where a custom color is re+uired! contactthe factory for more information.

PTICAL A!!E-L: LE-S *-D O)T%'*L *SSE79LQ
http://www.hadco.com/Hadco/Public/ProductSpecSheet.aspx?pid=3688http://www.hadco.com/Hadco/Public/ProductSpecSheet.aspx?pid=3688


9/12

Lens is constructed of clear or opal e:truded C.. stabili(ed polycarbonate. Thelens has a 03&0F2 height and is ; in diameter.

RE8LE'TORS **%L*9LEHO Opal polycarbonate lens.

'LR 'lear polycarbonate lens with formed! highly polished specular aluminumfinish internal optical lou#ers.

'L9 'lear polycarbonate lens with natural aluminum lens baffle and formed!highly polished specular aluminum finish internal optical lou#ers.

,R3 'lear polycarbonate lens with mold glass Type 3 refractor with precisionmolded prisms for light control and ma:imi(e optical performance.

,R1 'lear polycarbonate lens with mold glass Type 1 refractor with precisionmolded prisms for light control and ma:imi(e optical performance.

ELECTRICAL A!!E-L: 9allast are $)8 core and coil. B"# rated medium baseporcelain soc"et. -ic"el&plated screw shell with center contact.

ALLA!T: *ll $%D ballasts are core and coil and regulated with power factors

better than G4 s+. ft

-a./ &*+t: 24 lbs

Ordering ,uide

E.a3*: C!104 P2 #L A & D 70% E

Product Cod* 'S041 'ontemporary

-ou,t,+ )2 2&3F;I Tenon

)B BI %S8 KK

To3 8L 8lat

)T )oint

RD Round

#,s

* 9lac"

9 Hhite

0000000000000

0000000000000

0000000000000

0

0


10/12

$ 9ron(e

% ,ray

3tcs HO Hhite Opal

TR 'lear F Lou#ers

T9 'lear F 9affle

R3 Type %%% Refractor 9owl

R1 Type Refractor 9owl

!oc8*t D 7edium

8 8luorescent

T T/ KKK

&atta+* >4$ >4H 7$

044$ 044H 7$

014$ 014H )7$

>4S >4H $)S

044S 044H $)S

014S 014H $)S

B28 B2H '8

$ota+* E 024

8 24;

, 2B4

$ 2>>

KK )ole 7achining re+uired for )B mounting. %S8 %nternal Slip 8it

KKK T/ soc"et is ,02 base! 8luorescent soc"et is ,X2B+&3F&B base

Specifications

%"!ING: 'ool e:ternal temperatures & all below 3;' & so the luminaire is cool to the touch! including the lens.)erfect for high pedestrian traffic and plant life applications. E:ceeds European standard E- 1/3 both 0 second


11/12

minimum starting temperature. 02 olt fi:ture is pre&wired with 3&ft pigtail of 0;&2 *H,! 0415 '! S)T&0H wire.8i:ture is pre&wired and potted to pre#ent water entry. Low #oltage +uic" connector! catalog PL'3 included foreasy hoo"&up to the low #oltage supply cable! not included. Low #oltage transformer must be ordered to powerthe fi:tures. 02 olt system re+uires remote transformer! not included.


CERTI#ICATIN!: ETL listed to C.S. safety standards for wet locations. cETL listed to 'anadian safety standardsfor wet locations. 7anufactured to %SO G440244; Standards.

IP RATING: %)//F/; Dust&tight and dual rated & sealed against direct ets of water and against temporaryimmersion at a depth greater than 0 meter


12/12

CERTI#ICATIN!: ETL listed to C.S. safety standards for wet locations. cETL listed to 'anadian safety standardsfor wet locations.

L*,+t:

%*+t : 2I

rx2 ledgine

Documents