resume sample

Objective: Seek the Position of Design Engineer

SUMMARY: Exceptionally talented Design Engineer with more than eight years experience in performing the engineering and designing of automotive seats, mechanisms and structures including the design, development, testing, validation and support of manufacturing for improvements of current systems and advanced development of new systems including seat Adjusters, Recliners, Head Restraints, Lumbar Mechanisms, Seat back latches, floor latches.

Summary of Qualifications

Strong ability to write detailed engineering specifications. Great expertise in standard ASIC design flows including Verilog simulators, synthesis, timing analysis, DFT methodologies & tools. Exceptional ability to code in Verilog RTL language following Design and DFT guidelines. Deep ability to perform simulation debug and silicon bringup. Uncommon experience designing complex state machines, DMA controllers and CPU interface controller. Profound knowledge of desired domain: CPU sub-systems and Ethernet Switching. Enviable familiarity with C/C++ and VERA language. Immense experience of taking designs from concept to production silicon of at least 3 chips. Excellent communication skills and profound ability and desire to work in a team environment.

Professional Experience

Auto World Inc., Minneapolis, MN2004 - Present

Design Engineer - Automotive Seating Mechanism Responsible for complete mechanism product design in Cad (CATIA v5)

including tolerance studies, packaging studies, fits, tool clearance and manufacturability.

Responsible for engineering deliverables, including product design, drawings and checking, product specification, analysis, PDFSS, DFMEA, DVP&R, and Safety Sign Offs and design objectives / program timing.

Perform pugh analysis, root cause analysis, design guidelines, best practices, past program lessons learned, competitive product benchmarking information.

Ensure that prototype samples meet appearance and functional performance standards and ensure completion of appropriate product validation testing.

Perform studies to benchmark and evaluate competing design proposals. Design concepts and perform vehicle package studies using Catia v5 CAD software.

Evaluate seat and mechanism kinematics, FEA analysis, and interpret results. Create drawings and apply GD&T, Critical and Significant Characteristics. Generate BOM's, maintain open issues lists, and typical engineering

documents. Conduct component tolerance studies and assembly stack evaluations. Perform engineering calculations for mass, strength and performance. Schedule and comprehend test results, prepare DFMEA's, PFMEA's and

DVP&R's.

Prepare engineering documents, and coordinate with customer, suppliers, and assembly plants.

Labella Engineering Inc., Minneapolis, MN2000 - 2004

Mechanical Engineer Designed and implemented cost-effective equipment modifications to help

improve safety, reliability and throughput; developing a project specification with colleagues, often including those from other engineering disciplines.

Developed, tested and evaluated theoretical designs; discussed and solved complex problems with manufacturing departments, sub-contractors, suppliers and customers.

Made sure that Labella product can be made again reliably and also that it will perform consistently in specified operating environments.

Managed projects using engineering principles and techniques. Planned and designed new production processes. Produced details of specifications and outline designs. Recommended modifications in the light of prototype test results. Used research, analytical, conceptual and planning skills, particularly

mathematical modeling and computer-aided design. Considered the implications of issues such as cost, safety and time

constraints. Worked with other professionals, within and outside the engineering

specialist.

Labella Engineering Inc., Minneapolis, MN1998 - 2000

Mechanical Engineering Intern (under supervision) Responsible for the documentation of analyses, layouts, and designs up to

and including final engineering drawings. Developed designs that are producible and designing to DOD-STD-100 Military

Drafting Standards. Developed and finalized parts, schematics, systems and installations of

varying complexity from design criteria supplied by the supervising engineer. Worked closely with the Engineering Management team in developing new

commercial products to help meet Labella's Corporate Growth Objectives.

Education

Bachelor's Degree in Mechanical EngineeringUniversity of New York (1998)

Sample Mechanical Design Engineer Resume

Richard Anderson1234, West 67 Street,

Carlisle, MA 01741,(123)-456 7890.

Objective: To obtain a position as a mechanical design engineer.

Skills:

Strong experience in semiconductor package process development and working with test vendors and high volume semiconductor package.

Familiar with packaging technologies. Proficient in the use of SolidWorks Basic knowledge of material properties and their design tradeoffs Excellent communicate skills in group presentations and written work.

Experience:

Cypress, Carmel, INMechanical Design Engineer

Responsible for detailed package-outline, development of 3D CAD and fabrication of drawing packages, processes and assembly procedures, vendor management, ECN documentation, and implementation of new optical sensing products and packaging designs. Also worked closely with the device design, optical design, test engineering and manufacturing teams.

Specific responsibilities include:

Generating detailed mechanical drawings. Developing models and designs from conceptual inputs. Drive quick turn prototyping of opto-mechanical and opto-electronic devices. Managing vendors to produce parts and assemblies on schedule. Preparing and transferring documents of design to the Cypress manufacturing

groups.

MRI Networks, Easton, PAMechanical Design Engineer

Responsible for design of boilers, furnaces, heat exchangers, pressure vessels, materials selection, piping, and quality control.

Directed worldwide engineering contractors and performed critical technical reviews of their work.

Fabrication and designing of high temperature piping and equipment.

Education:

Indiana University, Bloomington, INB.S. in Mechanical Engineering.

Contact information

Neeraj Doshi

C234, East Padmavati Colony, Mumbai(789)-121314

Career objective

I possess extensive manufacturing experience in project/plant management and engineering, and am eager to contribute to your company in a related senior-level role. I offer demonstrated talents in designing facility layouts, implementing long-range facility improvements, and developing improved safety, quality, and cost-reduction programs.

Career Achievements

Ability to comprehend, coordinates, and manages multiple projects. Strong leadership, communication, and creative skills. Ability to establish rapport

and build relationships with clients, staff, and suppliers. Excellent problem resolution skills; adept at assessing needs, communicating

value and facilitating quality improvement through a win-win approach. Expertise in technical communication including engineering analyses, quality

documentation, and product / process specification.

Experience

Manufacturing Design Engineer

Tri Star Foods Corporation, Mumbai, 2007-Present

Led the engineering office of SSOE Engineers and Architects to generate over Rs.60K in sales and return a 26% profit.

Functioned as project manager for ConAgra Foods to oversee feasibility studies and engineering design for a fast-paced project to consolidate multiple canning plants, including five filling and nine packaging lines for a new, Rs.100K Pune site. Intermixed equipment from different plants and purchased new equipment to

develop high-speed lines. Provided leadership to 60 packaging, mechanical, electrical, and controls engineers. Met the design goal to increase line speeds by 20%.

Designed, purchased, and installed the first high-speed packaging line in Tetra Corporations to run a non-cylindrical tapered PET bottle; completed line start-up two weeks ahead of schedule and on budget.

Senior Project Manager

PepsiCo India Ltd., Mumbai, 2004-2007

Manages sales, finances, staffing, and job estimating, scheduling, and quality control for a 22-person engineering office.

Performs a full range of project management duties. Designs food processing and packaging systems.

Performed as onsite project manager grocery products division to initiate front end loading documents for multimillion-dollar capital projects involving packaging, process, and facility improvements and modifications.

Worked with corporate and plant engineering to develop scope documents. Analyzed concepts to determine their technical and financial feasibility as well as

their viability on a savings basis. Served as project manager/technical engineer for Abbott Labs to develop a design

scope manual for the design/build of a plant in China that processed and packaged dry infant formula.

Addressed pneumatic conveying, vertical blender mixing, and auger filling into vertical/form/fill/seal machines. Completed the project ahead of schedule and under budget.

Technical Specialist

Nice Engineering Corporations, Mumbai, 2002-2004

Selected for this position based on leadership skills, ability to guide teams, and technical expertise in both domestic and international facilities involved with Technical Marketing, Design, Project Managers, Engineers, Test Lab, and other industry personnel.

Participated in the global product technology reviews for new product development projects.

Performed root cause analysis on project problem areas. Created and maintained molding tool design training materials and specifications

while accountable for the training of new engineers and management professionals.

Developed product designs and testing methods based on customer need. Worked with patent attorneys to write and create multiple patent claims and

characteristics.

Education and Certification

M Sc. (Industrial Engineering)

Mahindra Institute for Modern Industrial Technologies, Mumbai, 2002

B Sc.

West Coast College for Science and Arts, Mumbai, 200

Honors

Visited Indian Corporate Meet on Business and Trade Concepts in 2008 and achieved major attention.

Called for honor by Delhi University on 25th establishment anniversary. Member of Business Executive Council of India.

References

Aditya Chopra

Chief Manager

PepsiCo India Ltd.

OBJECTIVE: Challenging position in Engineering or related field that utilizes my work experience, educational attainment, and attributes while presenting opportunities for further growth and development.

SUMMARY OF QUALIFICATION: *“21” years in the Aerospace Industry at The Boeing Company with proven experience in performing work as Manufacturing/Design Engineer, Field Support Engineer,

Integrated Logistics Support (ILS), “WIR” writer support, Kit-Proof support and Liaison Technical Support. Duties include wire assemblies and electro-mechanics design requirements, manufacturability development per OEM/FAA requirements, release and maintain wiring assembly drawings, drawing checker and engineering order (EO) for release of electrical systems. Create schematics along with block diagrams per air force requirements. Release engineering modification drawings wire-kits for field service and create reports. Review applicable electrical Interface Control Documents (ICD) and customer specifications to provide statements of work (SOW). Provide basic of estimate (BOE) to schedule and budget hours for various projects cost estimating. Prepare basic of material (BOM) to order parts that were long lead items. Prepare & present changes to the Program Level Review (PLR), the Configuration Control Board (CCB) and the Miscellaneous Change Board (MCB). Research & answer engineering response to corporate corrective action request report (CCAR), engineering corrective action request (ECAR), discrepancy report (DR) and material investigation process (MIP). Responsible for the Liaison Engineer between the Boeing Company the vendors and the Air Force via proposal of new designs and scheduling of hours and cost. Created and presented (PLR) presentation to support the required changes to be implemented between the company and our customers including the Air force for special projects for engineering development. Research and investigate specification manuals, drawings, and data systems. Perform Liaison tasks on the (MIP) and (DR) between the company, outside vendors and the Air force. Create work instructions for manufacturing parts and assemblies per release documents and drawings to manufacturing mechanics and technicians. Provide Planning instructions to production on the released Engineering Drawings. Comply with, but not limited to the following Specifications: DOD-STD-863, MIL-W-5088, MIL-S-1553, MIL-B-5087, DOD-STD-100, MIL-STD-12, DAC-WZZ7001 and DAC-WZZ7002. Unigraphics and AutoCAD courses at The Boeing Company. Provide Team Leadership for C-17 electrical wire harness forward fuselage & nose area design prior to TQMS. Worked on the C-17, C-130, MD80, MD90 and 717 aircrafts. *”11” years in the Shipbuilding Industry at Ingalls Shipbuilding, Inc., Todd Pacific Shipyards, Inc. and Norden Service Company. In these companies I've developed proven experience in performing work as a Cable/Harness Design Engineer, Field Service Engineer and an Electrical Technician. Duties include cable/harness design, electro-mechanics development design, drawing and EO's release of electrical systems and the connection interfacing and routing of cables/wire harnesses and their related hardware. Released engineering modification drawing wire-kits for field service and created reports. Check for quality control of each wire connections and assist in operational test procedures.*Result-oriented engineer with strong technical, analytical, interpersonal, and leadership skills. Assist as POC, for the wire assembly group on special projects. Order and maintain the procurement of wire harness materials, electro-mechanics/installation items and group scheduling. Handle proprietary and sensitive material. Experience with Douglas and Boeing drawings.*Expert in the following engineering tools: Microsoft Word, Microsoft Visio, Microsoft Front Page, Microsoft Power Point, Microsoft Excel, Microsoft Outlook and Microsoft Office Tools. Also office scanner, printer, plotter and other equipment.

*Knowledgeable in the following engineering tools: Microsoft Project, DOD-STD-863, MIL-W-5088, MIL-S-1553, MIL-B-5087, DOD-STD-100, MIL-STD-12, DAC-WZZ7001 and DAC-WZZ7002, CFR, NEC, IEEE, ARINC 429. Kept up-to-date on generated requirements for drawing and engineering change orders, submissions, and reports.*Experience in Production support and Field support. Duties include disposition of production issues and onsite support of retrofit projects. Research & answer engineering response to corporate corrective action request report (CCAR), engineering corrective action request (ECAR), discrepancy report (DR) and material investigation process (MIP).*Proactive self-starter, Strong attention to detail, outstanding interpersonal skills and competent decision maker. Dependable, thorough and well-organized professional who communicates effectively. Have the ability to work independently. Stay up-to-date with company and FAA policies.*Special Projects for the product development and Modification Drawing assignments for the following contracts:a. Communication Open System Architecture (COSA)b. Undersized Wirec. Terrain Awareness and Warning System (TAWS)d. Weather Radare. Electronic Engine Control (EEC)f. Air Radio Communications-210 (ARC-210)*Clearance..... Confidential during employment at Ingalls Shipbuilding and Todd Pacific Shipyards (1976-1987) due to navy contracts.*EDUCATIONAL ATTAINMENT:University of California Extension, Torrance, CACertificate in Techniques of Teaching, 1984

El Camino College, Torrance, CAAssociate of Science (A.S.) Degree and Certificate in Electronics Engineering Technology, 1982

Citrus College, Azusa, CAElectronics related courses, 1980

*Technical Training:Certificate in FFG-7 class navy ships combat system course via Sperry Division, 2/1983

Certificate in FFG-7 class navy ships radar video processor course via Hughes Aircraft Company, 4/1983

Certificate in FFG-7 class navy ships executive control unit course via General Electric, 2/1984

Electrical apprentice training for naval ships wiring systems interface, Ingalls Shipbuilding, 1976

*DETAILED EMPLOYMENT EXPERIENCE:11/87 – 01/09: The Boeing Company, Long Beach, CAManufacturing/Design Engineer / Oversee the electrical wire harness forward fuselage & nose area design on the C-17A program. Design and integrate electrical assemblies using subsystem diagrams, schematics and block diagrams. Prepare wire data packages using avionics, flight control, lighting, power, data bus & communication systems information. Assist as POC, for the wire assembly group, on special project as required. Coordinate with manufacturing and all phases of engineering in the development and production effort. Assist in the procurement of wire harness materials, group schedule and preparation of system diagrams. Provide "BOE" & "ROM". Develops statements of work, schedules and budgets. Performs technical review of supplier capabilities to facilitate source selection. Issue engineering order (EO), engineering drawing & modification drawing wire-kits. Research & answer engineering response to corporate corrective action request report (CCAR), engineering corrective action request (ECAR), discrepancy report (DR) & material investigation process (MIP). Prepare & present improvement changes to the miscellaneous change board (MCB). Interface with customs to provide Kit-Proof support. Provide field engineering support, Integrated Logistics Support (ILS) support & "WIR Writer" support. Comply with, but not limited to the following Specifications: DOD-STD-863, MIL-W-5088, MIL-S-1553, MIL-B-5087, DOD-STD-100, MIL-STD-12, DAC-WZZ7001 and DAC-WZZ7002. Team Leader for C-17 electrical wire harness forward fuselage & nose area design prior to TQMS.

9/87-11/87: Norden Service Company, Inc., Terminal Island, CAField Service Engineer/Responsible for the routing and installation of MIL-STD cables, wire harnesses and associated hardware per electrical wire data, system diagrams and installation drawings. Check for quality control of each wire connections and assist in operational test procedures. Comply with the general specifications per the US NAVY.

6/80-3/87: Todd Pacific Shipyards, Inc., San Pedro, CAManufacturing/Design Engineer /Design the routing and integration of electrical cabling and wire assemblies. Establish wire separation and disconnect requirements. Support and coordinate with manufacturing. Write test procedures and solutions to design discrepancies. Determine the vendors for electrical equipment. Assist with operational test and design proposal programs. Comply with CFR, NEC, IEEE, general specification per the US NAVY and various MIL-STD's.

8/76-11/79: Ingalls Shipbuilding, Inc., Pascagoula, MSElectrical Technician/Responsible for the termination hook-up and routing of cable, wire harnesses and related hardware. Use systems and installation drawing for production effect. Assist with operational test procedures. Comply with the general specifications per the US NAVY.

Nelson Jarod 7865 Charles Street

Cambridge MA 02140

257-309-8910 [email protected]

Objective: Seeking a challenging structural engineer position in a well reputed organization where my experience is fully utilized for the growth of the organization.

Technical Skills:

• Analysis of stress and strain • Mechanics of materials • Dynamic response of MDOF systems • Design of special RC elements, connections and light gauge steel structures • Finite element analysis

Other Skills:

• Languages : C, C++, HTML • Operating System : Windows 95/98/ME/AIX • MS Office • Effective human relations and teamwork skills • Able to accomplish work and multitask while under time constraints

Work Experience:

Antonopoulos Company Inc, Cambridge, MALead Structural Engineer, from August 2008 to till date

Role:

• Contributed to cross-functional team meetings for value engineering purposes. • Analyzed full project lifecycle to identify improvements and cost saving strategies. • Design the primary jaw crushing facility, processing tanks, tank top steel, stair towers, service support structures, warehouses, site drainage and other facilities. • Design of various conveyors and site drainage facilities.

Minuteman Group, Inc - Lexington, MAStructural Engineer, from May 2006 to July 2008

Role:

• Inspected, evaluated, and redesigned existing structures for continued operation. • Directed highly technical projects with short time frames and tight deadlines. Delivered completed projects on time and within budget. • Designed plant preventative and predictive maintenance programs. • Responsible for checking drawings and design calculations done by other engineers. • Estimate material quantities required for construction.

Education:

Massachusetts Inst of Technology, march 2006 MS Structural Engineering with GPA 3.5

Massachusetts Inst of Technology, March 2004 BS Structural Engineering with GPA 3.45

Achievements and Honors:

• American Society of Civil Engineers (ASCE), Member, Technical Council on Special Structures. • Boston Association of Structural Engineers (BASE) Vice President.

Sharon Hernandez 1234 East 69 Street

Alpine CA, 91903


Objective: To obtain the position of AutoCAD Engineer in a company that effectively utilizes my experience.

Skills:

• Extensive knowledge in structural steel designs, industrial piping designs and welding processes • Knowledge of mechanical and electrical systems • Experience in mechanical drafting, sheet metal drafting and creating electrical designs for machinery • Advanced proficiency with AutoCad, OmniCAD, and HASS Calculation software

Professional Experience:

AutoCAD Engineer, 2007 to till dateDaisy Manufacturing Company, CA

Responsibilities:

• Designed individual rotating part drawings and performed welding for base plate fabrications and various piping systems. • Created layouts for potential plant site redevelopment and repair parts kits. • Provided field work to assist with design, modification and installation of engineering projects. • Developed Engineering drawings in the architectural, electrical, mechanical and piping disciplines.

Education:

M.S in Mechanical Engineering, 2007 Carnegie Mellon University

B.S in Mechanical Engineering, 2005 Harvard University

Marshall White 6618 S Wabash Ave

Sacramento, CA 94203 (111)-222-3333

[email protected]

Objective: To obtain a HVAC Design Engineer position in a well established company where my skills will make a positive contribution.

Skills:

• Proficiency with working in laboratories and in residential environment debugging HVAC Motor systems. • Skilled at troubleshooting and repairing HVAC units including electronic and mechanical components. • Hands-on experience in HVAC load calculation system selection, production of Auto CAD drawing and cost estimation. • Extensive experience in design of HVAC, plumbing and fire protection systems.


HVAC Design Engineer, 2007 to till dateSabreliner Corporation, CA

Duties:

• Installed and repaired HVAC system automation components. • Designed and drafted HVAC systems. • Maintained and checked the layout and design at site for mechanical services. • Supervised the installation of the HVAC system during the construction, in accordance with technical, quality and safety requirements.

Education:

M.S in Mechanical Engineering, 2007 University of Illinois, Urbana-Champaign

B.S in Mechanical Engineering, 2005 Pennsylvania State University, University Park

Sandra Walker 250 Main Street

Deming NM, 88030


Objective: Seeking the position of a Fabrication Engineer that utilizes my skills and expertise for the benefit of the company.

Skills:

• Extensive Knowledge of modern fabrication techniques & welding processes. • Immense ability to read and understand basic and complex engineering drawings and specifications. • Broad knowledge of manufacturing procedures, job management, welding codes and welding techniques. • Strong knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, assembly methods, and quality control standards.


Fabrication Engineer, 2007 to till date Nabors Industries Ltd., NM

Duties:

• Involved in repairing metal parts for machinery and equipment such as motor bodies, trailer units, containers, truck frames and bridges. • Performed assemble parts and structures by lining up and joining them by welding, bolting or riveting. • Monitored and coordinated of valve manufacturing activities. • Maintained and updated manufacturing assembly procedures.

Education:

M.S in Mechanical Engineering, 2007 University of Rochester

B.S in Mechanical Engineering, 2005 Indiana University, Bloomington

Edward Macken14315 Old Prairie Creek Rd

Rogers, AR 72756 (777)-412-4440

[email protected]

Objective: Looking for a Design Engineer position that will allow me to utilize my engineering experience along with incorporating my skills and knowledge.

Skills:

• Hands-on experience in product design and manufacturing environment. • Extensive experience in designing rotating equipment. • Expert in 3D modeling and detail design using Solid works and similar 3-D modeling software and AutoCAD. • Extended knowledge of design and qualification standards used in the oil and gas industry.


Design Engineer, 2006 to till dateMacronix International Co., Ltd., AR

Duties:

• Tested and analyzed refining the design to optimize the function, appearance, and manufacturing of new parts and assemblies. • Generated product and hardware requirement specifications. • Developed accurate and detailed parts and assembly layouts. • Performed design stress analysis and oversaw supporting analyses such as the thermal.

Education:

M.S in Mechanical Engineering, 2006 Stanford University

B.S in Mechanical Engineering, 2004 Carnegie Mellon University

Matthew Boyer1500 Broadway, Apt 11

Santa Barbara, CA 93103 (111)-123-1234

[email protected]

Objective: To obtain a Junior Mechanical Engineer position in a well established company where my skills will make a positive contribution.

Skills:

• Strong experience with the engineering and design of heavy industrial equipment. • Proficiency in creating 2D and 3D component and assembly drawings as required utilizing primarily solid Works. • Solid experience in repairs and planned maintenance on industrial equipment such as lathes, milling machines, presses. • Broad knowledge of mechanisms, fixturing, engineering concepts, and a mathematical aptitude.


Junior Mechanical Engineer, 2006 to till dateDarcars Automotive Group., CA

Duties:

• Developed, designed, manufactured, and tested tools, engines, machines, and other mechanical devices. • Operated and maintained mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles. • Developed and coordinated, all aspects of production, including selection of manufacturing methods, fabrication, and operation of product designs. • Developed power-using machines such as refrigeration and air-conditioning equipment, machine tools, material handling systems, elevators and escalators.

Education:

M.S in Mechanical Engineering, 2006 Rockefeller University

B.S in Mechanical Engineering, 2004 Rutgers State University-New Brunswick