resilient seated gate valve jsv c509 gate...series 6700 os&y gate valve f x f, os&y, 2” -...

RESILIENTSEATEDGATE VALVESOLID WEDGE AWWA C509/C515SIZE 2” - 108”

SERIES 6000 - AWWA C509/C515 SIZES: 2” - 14”TYPE: NON-RISING STEM (NRS)

2” OPERATING NUTOR HAND WHEEL

Ductile Iron

STEMStainless Steel

or Bronze

GLANDDuctile Iron

BONNETDuctile Iron

STEM NUTAluminum Bronze

WEDGEDuctile Iron

Encapsulated withEPDM Rubber (Other

Elastomers Available)

TRIPLE O-RINGSTEM SEALSEPDM (Other Elastomers Available)

THRUST COLLARwith 2 BrassThrust Washers

O-RING GASKETEPDM (Other Elastomers Available)

NUTS, BOLTS,AND WASHERSStainless Steel

BODYDuctile IronFusion Bonded EpoxyCoated Inside & Outsideper AWWA C550

Design and Materials Subject to Change Without Notice. Call for Verification and Any Updated Drawings

JANDSVALVE.COM

SERIES 6900 NRS GATE VALVE

MJ X MJ, NRS, 30”- 48”



Offered: Open Left or Open Right, 2” Operation Nut or Handwheel. Optional Bevel or Spur Gear Available.Optional, Integral By-Pass Available on 14” & 16”.

18” & Larger include Gear Operator-Specify Bevel or Spur Gear. Offered: Open Left or Open Right, 2” Operation Nut or Handwheel. Optional, Integral By-Pass Available.

Specify Bevel or Spur Gear with 2” Operating Nut. Rollers, Tracks and Scrapers on both sides for Vertical and Horizontal

Installation. Offered: Open Left or Open Right. Optional, Integral By-Pass Available.

SIZE MODEL L H T18” 6918 18” 40 1/4” 1 1/4”

20” 6920 20” 46 1/4” 1 1/4”

24” 6924 20 1/2” 52 1/2” 1 1/4”

SIZE MODEL L H T2” 6902 8” 10 7/8” 7/8”

2 1/2” 69025 8 1/2” 11 3/8” 7/8”

3” 6903 9” 13 3/4” 7/8”

4” 6904 10” 15 7/8” 1”

5” 6905 11” 17 1/4” 1”

6” 6906 11 1/2” 19 1/8” 1”

8” 6908 12 1/2” 23 1/2” 1 1/8”

10” 6910 14 3/4” 26 1/4” 1 1/4”

12” 6912 14 7/8” 30 3/4” 1 1/4”

14” 6914 17” 34 1/2” 1 1/4”

16” 6916 17” 40 1/4” 1 1/4”

SIZE MODEL L H T30” 6930 24” 70” 1 7/8”

36” 6936 28” 81” 2”

42” 6942 36” 86” 2”

48” 6948 44” 96” 2”

MJ X MJ, NRS, 18”- 24”

MJ X MJ, NRS, 2”- 16”

INSTALLATION DIMENSIONS

JANDSVALVE.COM

SERIES 6000 SIZES: 54” - 108”TYPE: NON-RISING STEM (NRS)

BODYDuctile Iron

BONNETDuctile Iron

GLANDDuctile Iron

WEDGEDuctile Iron

Mechanically Retained EPDM Seat (Other


STEMStainless Steel (Other

Materials Available)

STEM SEALS EPDM (Other


STEM NUTAluminum Bronze


COATINGFusion Bonded EpoxyCoated Inside & Outsideper AWWA C550

BODY GASKETEPDM (Other Elastomers Available)

BY-PASSIntegral By-pass, Available (Sized as listed in Table 11 of the AWWA C500)

SEATS

Mechanically RetainedRubbers Seat(Field Adjustable &Replaceable)


JANDSVALVE.COM


F X F, NRS, 2” - 12”

F X F, NRS, 14” & 16”

F X F, NRS, 54” - 108”

F X F, NRS, 18” - 48”

Offered Open Left or Open Right, 2” Operation Nut or Handwheel. Optional Bevel or Spur Gear Available with Handwheel or 2” Operating Nut

Offered: Open Left or Open Right, Optional Bevel or Spur Gear, 2” Operation Nut or Handwheel. Optional, Integral By-Pass Available on 14” & 16” Valves.

54” & Larger include Gear Operator-Specify Bevel or Spur Gear with Handwheel or 2” Operating Nut. Rollers, Tracks and Scrapers on both sides for Vertical and Horizontal Installation. Offered: Open Left or Open Right. Optional, Integral By-Pass Available.

18” & Larger include Gear Operator-Specify Bevel or Spur Gear. 30” and larger have Rollers, Tracks and Scrapers on both sides for Vertial and Horizontal Installation. Offered: Open Left or Open Right, 2” Operation Nut or Handwheel. Optional, Integral By-Pass Available.

SIZE MODEL L H D T W14” 6814 15” 30 3/4” 21” 1 3/8” 23 1/2”

16” 6816 16” 35 5/8” 21” 1 1/2” 27 1/2”

SIZE MODEL L H D T2” 6802 7” 10 7/8” 7 1/2” 5/8”

2 1/2” 68025 7 1/2” 11 3/8” 7 1/2” 3/4”

3” 6803 8” 13 3/4” 10” 3/4”

4” 6804 9” 15 7/8” 10” 1”

5” 6805 10” 17 1/4” 12” 1”

6” 6806 10 1/2” 19 1/8” 12” 1”

8” 6808 11 1/2” 23 1/2” 14” 1 1/8”

10” 6810 13” 26 1/4” 17 1/2” 1 1/4”

12” 6812 14” 30 3/4” 17 1/2” 1 1/4”

SIZE MODEL L H W54” 6854 44” 109” 83 1/8”

60” 6860 44” 127 1/8” 84”

72” 6872 48” 150” 104 3/4”

84” 6884 48” 174 1/2” 124”

90” 6890 54” 187 1/2” 130”

96” 6896 54” 200” 138”

102” 68102 57 1/2” 211” 145 1/2”

108” 68108 57 1/2” 223” 154 1/2”

SIZE MODEL L H D T W18” 6818 17” 37” 21” 1 5/8” 27 1/2”

20” 6820 18” 43 3/8” 21” 1 3/4” 32”

24” 6824 20” 49 7/8” 21” 1 7/8” 39 1/4”

30” 6830 24” 66 7/8” 21” 2 1/8” 47 3/4”

36” 6836 28” 76 1/2” 24” 2 3/8” 56 5/8”

42” 6842 36” 86” 24” 2 5/8” 61 1/4”

48” 6848 44” 96 1/4” 24” 2 3/4” 67 5/8”

JANDSVALVE.COM

SERIES 6000 - AWWA C509/C515 SIZES: 2” - 12” Available through 108”

TYPE: OUTSIDE SCREW & YOKE (OS&Y)

BODYDuctile Iron

BONNETDuctile Iron

GLANDDuctile Iron

WEDGEDuctile Iron

Encapsulated withEPDM Rubber

(Other Elastomers Available)

STEMStainless Steel

(Other MaterialsAvailable)

STEM NUTStainless Steel BODY GASKETEPDM (Other Elastomers Available)


COATINGFusion Bonded EpoxyCoated Inside & Outsideper AWWA C550

BY-PASSIntegral By-pass, Available (Sized as listed in Table 11 of the AWWA C500)


JANDSVALVE.COM

SERIES 6700 OS&Y GATE VALVE

F X F, OS&Y, 2” - 12”

F X F, OS&Y, 18” - 48” *Larger sizes available, contact us for more information



Offered Open Left or Open Right, 2” Operation Nut or Handwheel. Optional Bevel or Spur Gear Available with Handwheel or 2” Operating Nut.

Offered: Open Left or Open Right, Optional Bevel or Spur Gear, 2” Operation Nut or Handwheel. Optional, Integral By-Pass Available on 14” & 16” Valves.

Larger Sizes Available. 18” and Larger include Gear Operator-Specify Bevel or Spur Gear with Handwheel or 2” Operating Nut. 30” and larger have Rollers, Tracks and Scrapers on both sides for Vertical and Horizontal Installation. Offered: Open Left or Open Right. Optional, Integral By-Pass Available.

SIZE MODEL L H1 (OPEN) H2 D T T1 W14” 6714 15” 64 1/8” 49 5/8” 17 1/8” 49 5/8” 1 3/8” 23 1/2”

16” 6716 16” 76 1/8” 56 1/4” 27 1/2” 56 1/4” 1 1/2” 27 1/2”

SIZE MODEL L H (OPEN) D T2” 6702 7” 15 3/4” 7 1/2” 5/8”

2 1/2” 67025 7 1/2” 16 1/8” 7 1/2” 3/4”

3” 6703 8” 19 1/8” 10” 3/4”

4” 6704 9” 23 7/8” 10” 1”

5” 6705 10” 29 1/8” 12” 1”

6” 6706 10 1/2” 31 1/8” 12” 1”

8” 6708 11 1/2” 39 1/2” 14” 1 1/8”

10” 6710 13” 46 3/4” 17 1/2” 1 1/4”

12” 6712 14” 56” 17 1/2” 1 1/4”

SIZE MODEL L H1 (OPEN) H2 D T W18” 6718 17” 80 1/2” 58 5/8” 21” 1 5/8” 27 1/2”

20” 6720 18” 96” 70” 21” 1 3/4” 32”

24” 6724 20” 110 1/2” 86 1/2” 21” 1 7/8” 39 1/4”

30” 6730 24” 136 7/8” 101 5/8” 21” 2 1/8” 47 3/4”

36” 6736 28” 159 1/8” 118 1/8” 24” 2 3/8” 54 1/2”

42” 6742 36” 177 7/8” 133 7/8” 24” 2 5/8” 66 3/4”

48” 6748 44” 215 3/8” 160” 24” 2 3/4” 75 1/2”

F X F, OS&Y, 14” & 16”


JANDSVALVE.COM

SERIES 6600 FL X MJ, NRS GATE VALVE

FL X MJ, NRS, 18” - 24”

FL X MJ, NRS, 30” - 48”



Offered: Open Left or Open Right, Optional Bevel or Spur Gear. FL X MJ Tapping Valves have Guide Rings. Optional, Integral By-Pass Available on 14” & 16” Valves.

18” & Larger include Gear Operator-Specify Bevel or Spur Gear. Offered: Open Left or Open Right, FL X MJ Tapping Valves have Guide Rings. Optional, Integral By-Pass Available.

30” & Larger include Gear Operator- Bevel or Spur Gear with 2” Operating Nut. Rollers, Tracks and Scrapers on both sides for Vertical and Horizontal Installation. Offered: Open Left or Open Right, FL X MJ Tapping Valves have Guide Rings. Optional, Integral By-Pass Available.

SIZE MODEL L H T T118” 6618 19” 39 5/8” 1 1/2” 1 3/8”

20” 6620 19” 46 1/4” 1 3/4” 1 1/2”

24” 6624 21 3/4” 52 1/2” 1 7/8” 1 1/2”

SIZE MODEL L H T T12” 6602 7 1/2” 10 7/8” 5/8” 1”

2 1/2” 66025 8” 11 3/8” 3/4” 1”

3” 6603 8 1/2” 13 3/4” 3/4” 1”

4” 6604 9 1/2” 15 7/8” 1” 1”

5” 6605 10 1/2” 16 1/2” 1” 1”

6” 6606 11” 18 3/4” 1” 1”

8” 6608 12” 22 3/4” 1 1/8” 1 1/8”

10” 6610 14 1/4” 26 1/8” 1 1/4” 1 1/4”

12” 6612 14 3/8” 30 3/4” 1 1/4” 1 1/4”

14” 6614 15” 34 1/2” 1 3/8” 1 1/4”

16” 6616 16” 41 3/8” 1 1/2” 1 3/8”

SIZE MODEL L H W T T130” 6630 24” 69 1/2” 47 3/4” 2 1/4” 1 1/2”

36” 6636 28” 79 3/4” 54 1/4” 2 1/2” 1 1/2”

42” 6642 36” 89 3/4” 66 3/4” 2 3/4” 1 1/2”

48” 6648 44” 99 5/8” 75 1/2” 2 3/4” 1 1/2”


FL X MJ, NRS, 2” - 16”

JANDSVALVE.COM

FL X PO, NRS, 4”-12”

PO X PO, NRS, 4”-12”

SERIES 6400 FL X PUSH-ON GATE VALVE

SERIES 6500 PUSH-ON X PUSH-ONGATE VALVE

Offering: Open Left or Open Right.

Offering: Open Left or Open Right.

SIZE MODEL B C L H T4” 6404 4 1/2” 3 1/2” 11” 15 7/8” 1”

6” 6406 5 3/8” 4 1/8” 12 3/4” 19 1/8” 1”

8” 6408 5 7/8” 4 1/2” 14 3/4” 23 1/2” 1 1/8”

10” 6410 6 1/2” 4 5/8” 15 3/4” 26 1/4” 1 1/4”

12” 6412 7” 5 1/8” 16 1/4” 30 3/4” 1 1/4”

SIZE MODEL C H L4” 6504 3 1/2” 15 7/8” 11”

6” 6506 4” 19 1/8” 12 3/4”

8” 6508 4 1/2” 23 1/2” 14 3/4”

10” 6510 4 5/8” 26 1/4” 15 3/4”

12” 6512 5” 30 3/4” 16 1/4”

SERIES 6300 THREADED GATE VALVE

TH X TH, NRS, 2”- 4”

Offering: Open Left or Open Right. Operator: 2” Nut or Handwheel

SIZE MODEL L H

2” 6302 6” 9 1/4”

2 1/2” 63025 6 3/4” 11 3/4”

3” 6303 7 1/8” 11 3/4”

4” 6304 7 1/2” 12”


JANDSVALVE.COM

ACTUATIONSOLUTIONS

BEVEL GEARS• 90° intersecting shaft applications provide highly efficient operation

• The Coniflex® tooth form extends operating life and offers smoother, quieter operation

• Spiral bevel gears handle higher speeds and greater torque loads more smoothly and quietly than ever before

• Hardened or unhardened teeth offer versatility

• Bevel gears provide the flexibility of 1-1/2:1 to 18:1 ratios

• Fusion bonded epoxy coated in accordance with AWWA C550

SPUR GEARS• Used in parallel shaft applications

• High load capacity

• Higher contact ratio provides a smoother, quieter operation

• Fusion bonded epoxy coated in accordance with AWWA C550

ELECTRIC ACTUATORSElectric Actuators can be easily adapted to the valve allowing the valve to become integrated with the system while also allowing for local and remote operation.

The actuators are built in accordance with AWWA Standard C542 for Electric Actuators and are equipped with thermal overloads, torque switches and limit switches to protect the actuator and valve.J&S Valve prefers to supply “smart” actuators which offer features that are ideal for the digital world.

JANDSVALVE.COM

SPECIFICATIONAWWA C509/C515 RESILIENT SEATED GATE

SCOPEThis specification covers design, manufacturing and testing of 2” - 108” Resilient Seated Gate Valves.

STANDARDSValves 3” - 72” are designed and manufactured in compliance with AWWA C509 and C515, valves shall be ANSI NSF 61 Certified. For valves larger than 72” where applicable, are also designed in compliance with AWWA.

CONNECTIONSValves 2” - 48” shall have flange, mechanical joint or flange by mechanical joint end connections.54” and larger valve shall be flange in accordance with ASME B16.1.

DESIGNValves shall be non-rising stem (NRS) or outside screw and yoke (OS&Y).

TESTING Valves shall be tested in accordance with AWWA C509 or C515.

MATERIAL Body, Bonnet, Wedge and Gland shall be cast of ASTM A536 Grade 65-45-12 ductile iron. Stem material, body bolts and bonnet bolts shall be stainless steel, bronze stems available. The wedge on 2” - 48” shall be encapsulated with synthetic rubber to allow zero leakage at the rated pressure. 54” and larger shall have a mechanically retained rubber seat on the wedge that is retained by a stainless steel ring with stainless steel bolts. The rubber parts are to be EPDM or other specified elastomer. OS&Y Valves shall have multiple rings of packing and a stuffing box. 30” and larger valves shall have stainless steel rollers and track with bronze scrapers on both sides of the body which maintains a smooth surface between the rubber seating area and the iron body of the valve and also guides the wedge through full travel of operation.

COATINGSValve internal and external coatings shall be NSF 61 Certified Epoxy Coating.

QUALITYResilient Seated Gate Valves 2” - 108” shall be manufactured by J&S Valve, Inc. or approved equal.

JANDSVALVE.COM

2323 1st Street Huffman, Texas 77336

T: 281.324.3990 | F: 281.324.6879 | E: [email protected]

JANDSVALVE.COM

05-2019

IMPROVING THEINDUSTRY STANDARD.

INSTALL RELIABILITY. INSTALL J&S VALVE

J&S Valve shows its commitment to providing quality products by manufacturing with the highest grade materials and testing 100% of its valves. J&S is a leader in the Waterworks Industry. We provide products and services that consistently exceed our customers’ needs as they relate to quality, performance, dependability, operation, and delivery.

resilient seated gate valve jsv c509 gate...series 6700 os&y gate valve f x f, os&y, 2” -...

Documents