os & y gate valves, swing check valves - nteico … · os & y gate valves, swing check...

20
VALVES OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, POST INDICATOR VALVES www.nteico.com U.A.E | K.S.A

Upload: dinhbao

Post on 25-Apr-2018

236 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

VALVESOS & Y GATE VALVES, SWING CHECK VALVESNRS GATE VALVES, POST INDICATOR VALVES

www.nteico.comU.A.E | K.S.A

Page 2: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

VALVESOS & Y GATE VALVES, SWING CHECK VALVESNRS GATE VALVES, POST INDICATOR VALVES

Page 3: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

INDEX

FIRE EQUIPMENT

NTEICO VALVES

NT22URESILIENT WEDGE C.I OS & Y GATE FLANGED ENDS, 200PSI

NT21UFRESILIENT SEATED D.I GATE VALVE N.R.S FLANGED ENDS, 200PSI

NT22FRESILIENT WEDGE D.I GATE VALVE OS&Y FLANGED ENDS, 250PSI

NT21FRESILIENT SEATED D.I GATE VALVE N.R.S FLANGED ENDS, 25OPSI

NT22GRESILIENT WEDGE D.I GATE VALVE OS&Y GROOVED END, 250PSI

NT21GRESILIENT SEATED D.I GATE VALVE N.R.S GROOVED END, 250PSI

NT62UMETAL SEATED C.I IRON BODY GATE VALVE O&Y, 175PSI

NT63UC.I SWING CHECK VALVE, FLANGED ENDS, 200 PSI

NT53UFFLANGED END DUCTILE IRON BODY SWING CHECK VALVE (TWIN DISC)

NT63UG GROOVED END DUCTILE IRON BODY SWING CHECK VALVE

NT8230 RESILIENT SEATED GATE VALVE, OS&Y FLANGED ENDS, 300PSI

NT800A ADJUSTABLE TYPE VERTICAL POST INDICATOR VALVE

NT8130 RESILIENT SEATED GATE VALVE, N.R.S FLANGED ENDS, 300PSI

05

06

07

08

09

10

11

12

13

14

17

15

16

Page 4: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

INDEX

FIRE EQUIPMENT

NTEICO VALVES

ANSIAMERICAN NATIONAL STANDARDS INSTITUTION

FMFACTORY MUTUAL ENGINEERING CORP.

NFPANATIONAL FIRE PROTECTION ASSOCIATION

ULUNDERWRITER’S LABORITES, INC.

ULCUNDERWRITER’S LABORATORIES OF CANADA.

INDUSTRY AND GOVERNMENT STANDARDS & APPROVALS

Page 5: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

NT22URESILIENT WEDGE CAST IRON GATE VALVE OS&Y FLANGED ENDS, 200PSI

Material List

Part Name Material ASTM SPEC.

Body Cast Iron ASTM A126-B

Wedge Cast Iron Coated with EPDM

Wedge NutCast Bronze ASTM B62

Stainless Steel AISI 201

Taper Pin Stainless Steel AISI 304

Bonnet Cast Iron ASTM A126-B

Packing Non-Asbestos Packing

Gland Cast Bronze ASTM B62

Hex. Head Bolt Steel ASTM A307-A

Gland Flange Ductile Iron A536 65-45-12

Hexagon Nut Brass ASTM B16

Square Head Bolt Steel ASTM A307-A

Stem Stainless Steel AISI 420

Yoke Cast Iron ASTM A126-B

Steeve Nut Ductile Iron A536 65-45-12

Yoke Steeve Cast Bronze ASTM B62

Hand Wheel Cast Iron ASTM A126-B

Wheel Nut Ductile Iron A536 65-45-12

Hexagon Nut Steel ASTM A307-A

Rubber Gasket EPDM

Hex. Head Bold Steel ASTM A307-A

Hexagon Nut Steel ASTM A307-A

Dimensions (mm / Inch)

Valve Size

65mm / 2-1/2” 80mm / 3” 100mm / 4” 150mm / 6” 200mm / 8” 250mm / 10” 300mm / 12”mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch

A 190.5 7-1/2 203.2 8 228.6 9 266.7 10-1/2 292.1 11-1/2 330.2 13 355.6 14

B(Open) 377.8 14-7/8 558.8 22 596.9 23-1/2 816.0 32-1/8 1019.0 40-1/8 1273.2 50-1/8 1505.0 59-1/4

B(Close) 323.8 12-3/4 482.6 19 495.3 19-1/2 663.6 26-1/8 816.0 32-1/8 1019.2 40-1/8 1190.6 46-7/8

C 177.8 7 254 10 254 10 304.8 12 355.6 14 406.4 16 457.2 18

Note: Design and materials are subject to change without notice.

Note: Sizes up to 4” inclusive made with yoke integral with bonnet, 6”~12” sizes made with separate yoke bolted to bonnet.

Features & Bene�ts

Fire protection valve. UL-listed. FM-approved.

Valves comply with AWWA C509

Working pressure 200PSI. Cold water pressure (Max. temp 63o C).

Flanged ends to ANSI B16.1 Class 125. Other �ange types available.

Application: Fire protection / Air Condition / Plumbing.

Pre-grooved stem for supervisory switch.

Epoxy coated interior / Exterior to AWWA C-550.

FIRE EQUIPMENT 05

NTEICO VALVES

Page 6: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

NT21UFRESILIENT WEDGE CAST IRON N.R.S GATE VALVE FLANGED ENDS, 200PSI

Material List

Part Name Material ASTM SPEC.

Body Cast Iron ASTM A126-B

Wedge Cast Iron Coated with EPDM

Bonnet Cast Iron ASTM A126-B

Box Cast Iron ASTM A126-B

Operation Nut Cast Iron ASTM A126-B

Hand Wheel Cast Iron ASTM A126-B

Base Plate Cast Iron ASTM A126-B

Nut Steel ASTM A307-A

Hex. Head Bolt Steel ASTM A307-A

Rubber Gasket EPDM

Wedge Nut Cast Bronze ASTM B62

Stem Stainless Steel AISI 420

O Ring EPDM

Dimensions (mm / Inch)

Valve Size

65mm / 2-1/2” 80mm / 3” 100mm / 4” 150mm / 6” 200mm / 8” 250mm / 10” 300mm / 12”mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch

A 190.5 7-1/2 203.2 8 228.6 9 266.7 10-1/2 292.1 11-1/2 330.2 13 355.6 14

B 252.4 9-15/16 352.4 13-7/8 364.3 14-11/32 463.5 18-1/4 550.8 21-11/16 650.8 25-5/8 740.0 29-1/8

C 177.8 7 254 10 254 10 304.8 12 355.6 14 406.4 16 457.2 18

Note: Design and materials are subject to change without notice.

Features & Bene�ts

Fire protection valve. UL-listed. FM-approved.

Valves comply with AWWA C509

Working pressure 200PSI. Cold water pressure (Max. temp 63o C).

Flanged ends to ANSI B16.1 Class 125. Other �ange types available.

Application: Fire protection / Air Condition / Plumbing.

Epoxy coated interior / Exterior to AWWA C-550.

FIRE EQUIPMENT 06

NTEICO VALVES

Page 7: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

NT22FRESILIENT WEDGE DUCTILE IRON OS&Y GATE VALVE FLANGED ENDS, 250PSI

Note: Design and materials are subject to change without notice.

Features & Bene�ts

Fire protection valve. UL-listed. FM-approved.

Valves comply with AWWA C515.

Working pressure 250PSI. Cold water pressure (Max. temp 63o C).

Flanged ends to ANSI B16.1 Class 125. Other �ange types available.

Application: Fire protection / Air Condition / Plumbing.

Pre-grooved stem for supervisory switch.

Epoxy coated interior / Exterior to AWWA C-550.

Material List

Part Name Material ASTM SPEC.

Body Ductile Iron A536 65-45-12

Wedge Cast Iron Coated with EPDM

Wedge NutCast Bronze ASTM B62

Stainless Steel AISI 201

Taper Pin Stainless Steel AISI 304

Bonnet Cast Iron ASTM A126-B

Packing Non-Asbestos Packing

Gland Cast Bronze ASTM B62

Hex. Head Bolt Steel ASTM A307-A

Gland Flange Ductile Iron A536 65-45-12

Hexagon Nut Brass ASTM B16

Square Head Bolt Steel ASTM A307-A

Stem Stainless Steel AISI 420

Yoke Cast Iron ASTM A126-B

Steeve Nut Ductile Iron A536 65-45-12

Yoke Steeve Cast Bronze ASTM B62

Hand Wheel Cast Iron ASTM A126-B

Wheel Nut Ductile Iron A536 65-45-12

Hexagon Nut Steel ASTM A307-A

Rubber Gasket EPDM

Hex. Head Bold Steel ASTM A307-A

Hexagon Nut Steel ASTM A307-A

Dimensions (mm / Inch)

Valve Size

65mm / 2-1/2” 80mm / 3” 100mm / 4” 150mm / 6” 200mm / 8” 250mm / 10” 300mm / 12”mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch

A 190.5 7-1/2 203.2 8 228.6 9 266.7 10-1/2 292.1 11-1/2 330.2 13 355.6 14

B(Open) 377.8 14-7/8 558.8 22 596.9 23-1/2 816.0 32-1/8 1019.0 40-1/8 1273.2 50-1/8 1505.0 59-1/4

B(Close) 323.8 12-3/4 482.6 19 495.3 19-1/2 663.6 26-1/8 816.0 32-1/8 1019.2 40-1/8 1190.6 46-7/8

C 177.8 7 254 10 254 10 304.8 12 355.6 14 406.4 16 457.2 18

Note: Sizes up to 4” inclusive made with yoke integral with bonnet, 6”~12” sizes made with separate yoke bolted to bonnet.

FIRE EQUIPMENT 07

NTEICO VALVES

Page 8: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

NT21FRESILIENT WEDGE DUCTILE IRON N.R.S GATE VALVE FLANGED ENDS, 250PSI

Material List

Part Name Material ASTM SPEC.

Body Ductile Iron A536 65-45-12

Wedge Cast Iron Coated with EPDM

Bonnet Cast Iron ASTM A126-B

Box Cast Iron ASTM A126-B

Operation Nut Cast Iron ASTM A126-B

Hand Wheel Cast Iron ASTM A126-B

Base Plate Cast Iron ASTM A126-B

Nut Steel ASTM A307-A

Hex. Head Bolt Steel ASTM A307-A

Rubber Gasket EPDM

Wedge Nut Cast Bronze ASTM B62

Stem Stainless Steel AISI 420

O Ring EPDM

Dimensions (mm / Inch)

Valve Size

65mm / 2-1/2” 80mm / 3” 100mm / 4” 150mm / 6” 200mm / 8” 250mm / 10” 300mm / 12”mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch

A 190.5 7-1/2 203.2 8 228.6 9 266.7 10-1/2 292.1 11-1/2 330.2 13 355.6 14

B 252.4 9-15/16 352.4 13-7/8 364.3 14-11/32 463.5 18-1/4 550.8 21-11/16 650.8 25-5/8 740.0 29-1/8

C 177.8 7 254 10 254 10 304.8 12 355.6 14 406.4 16 457.2 18

Note: Design and materials are subject to change without notice.

Features & Bene�ts

Fire protection valve. UL-listed. FM-approved.

Valves comply with AWWA C515

Working pressure 250PSI. Cold water pressure (Max. temp 63o C).

Flanged ends to ANSI B16.1 Class 125. Other �ange types available.

Application: Fire protection / Air Condition / Plumbing.

Epoxy coated interior / Exterior to AWWA C-550.

FIRE EQUIPMENT 08

NTEICO VALVES

Page 9: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

NT22GRESILIENT WEDGE DUCTILE IRON OS&Y GATE VALVE GROOVED END, 250PSI

Features & Bene�ts

Fire protection valve. UL-listed. FM-approved.

Valves comply with AWWA C515.

Working pressure 250PSI. Cold water pressure (Max. temp 63o C).

Flanged ends to ANSI B16.1 Class 125. Other �ange types available.

Application: Fire protection / Air Condition / Plumbing.

Pre-grooved stem for supervisory switch.

Epoxy coated interior / Exterior to AWWA C-550.

Grooves conform to ANSI / AWWA C-606 for steel pipe.

Material List

Part Name Material ASTM SPEC.

Body Ductile Iron A536 65-45-12

Wedge Cast Iron Coated with EPDM

Wedge NutCast Bronze ASTM B62

Stainless Steel AISI 201

Taper Pin Stainless Steel AISI 304

Bonnet Cast Iron ASTM A126-B

Packing Non-Asbestos Packing

Gland Cast Bronze ASTM B62

Hex. Head Bolt Steel ASTM A307-A

Gland Flange Ductile Iron A536 65-45-12

Hexagon Nut Brass ASTM B16

Square Head Bolt Steel ASTM A307-A

Stem Stainless Steel AISI 420

Yoke Cast Iron ASTM A126-B

Steeve Nut Ductile Iron A536 65-45-12

Yoke Steeve Cast Bronze ASTM B62

Hand Wheel Cast Iron ASTM A126-B

Wheel Nut Ductile Iron A536 65-45-12

Hexagon Nut Steel ASTM A307-A

Rubber Gasket EPDM

Hex. Head Bold Steel ASTM A307-A

Hexagon Nut Steel ASTM A307-A

Dimensions (mm / Inch)

Valve Size

65mm / 2-1/2” 80mm / 3” 100mm / 4” 150mm / 6” 200mm / 8” 250mm / 10” 300mm / 12”mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch

A 190.5 7-1/2 203.2 8 228.6 9 266.7 10-1/2 292.1 11-1/2 330.2 13 355.6 14

B(Open) 377.8 14-7/8 558.8 22 596.9 23-1/2 816.0 32-1/8 1019.0 40-1/8 1273.2 50-1/8 1505.0 59-1/4

B(Close) 323.8 12-3/4 482.6 19 495.3 19-1/2 663.6 26-1/8 816.0 32-1/8 1019.2 40-1/8 1190.6 46-7/8

C 177.8 7 254 10 254 10 304.8 12 355.6 14 406.4 16 457.2 18

D 73 2-7/8 88.9 3-1/2 114.3 4-1/2 165.1 6-1/2 219.1 8-5/8 273 10-3/4 323.9 12-3/4168.3 6-5/8

Note: Sizes up to 4” inclusive made with yoke integral with bonnet, 6”~12” sizes made with separate yoke bolted to bonnet.

Note: Design and materials are subject to change without notice.

FIRE EQUIPMENT 09

NTEICO VALVES

Page 10: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

NT21GRESILIENT WEDGE DUCTILE IRON N.R.S GATE VALVE GROOVED END, 250PSI

Material List

Part Name Material ASTM SPEC.

Body Ductile Iron A536 65-45-12

Wedge Cast Iron Coated with EPDM

Bonnet Cast Iron ASTM A126-B

Box Cast Iron ASTM A126-B

Operation Nut Cast Iron ASTM A126-B

Hand Wheel Cast Iron ASTM A126-B

Base Plate Cast Iron ASTM A126-B

Nut Steel ASTM A307-A

Hex. Head Bolt Steel ASTM A307-A

Rubber Gasket EPDM

Wedge Nut Cast Bronze ASTM B62

Stem Stainless Steel AISI 420

O Ring EPDM

Features & Bene�ts

Fire protection valve. UL-listed. FM-approved.

Valves comply with AWWA C515

Working pressure 250PSI. Cold water pressure (Max. temp 63o C).

Flanged ends to ANSI B16.1 Class 125. Other �ange types available.

Application: Fire protection / Air Condition / Plumbing.

Epoxy coated interior / Exterior to AWWA C-550.

Grooves conform to ANSI / AWWA C-606 for steel pipe.

Dimensions (mm / Inch)

Valve Size

65mm / 2-1/2” 80mm / 3” 100mm / 4” 150mm / 6” 200mm / 8” 250mm / 10” 300mm / 12”mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch

A 190.5 7-1/2 203.2 8 228.6 9 266.7 10-1/2 292.1 11-1/2 330.2 13 355.6 14

B 252.4 9-15/16 352.4 13-7/8 364.3 14-11/32 463.5 18-1/4 550.8 21-11/16 650.8 25-5/8 740.0 29-1/8

C 177.8 7 254 10 254 10 304.8 12 355.6 14 406.4 16 457.2 18

D 73 2-7/8 88.9 3-1/2 114.3 4-1/2 165.1 6-1/2 219.1 8-5/8 273 10-3/4 323.9 12-3/4168.3 6-5/8

Note: Design and materials are subject to change without notice.

FIRE EQUIPMENT 10

NTEICO VALVES

Page 11: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

NT62UMETAL SEATED CAST IRON BODY OS&Y GATE VALVE, 175PSI

Features & Bene�ts

Fire protection valve. UL-listed. FM-approved.

Outside screw and yoke.

Iron body. Bronze mounted. Solid wedge.

Flanged ends to ANSI B16.1 Class 125. Other �ange types available.

Application: Fire protection / Air Condition / Plumbing.

Working pressure: 175psi, (Non – shock cold water pressure).

Conform to MSS SP-70.

Pre-grooved stem for supervisory switch.

Material List

Part Name Material ASTM SPEC.

Body Cast Iron ASTM A126-B

Disc Cast Iron ASTM A126-B

Body Seat Ring Cast Bronze ASTM B62

Disc Seat Ring Cast Bronze ASTM B62

Bonnet Cast Iron ASTM A126-B

Packing Non-Asbestos Packing

Bonnet Bush Cast Bronze ASTM B62

Gland Cast Bronze ASTM B62

Gland Flange Ductile Iron A536 65-45-12

Yoke Cast Iron ASTM A126-B

Yoke Sleeve Cast Bronze ASTM B62

Stem Stainless Steel AISI 420

Steeve Nut Ductile Iron A536 65-45-12

Hand Wheel Cast Iron ASTM A126-B

Wheel Nut Ductile Iron A536 65-45-12

Gasket NON-ASBESTOS

Hex. Head Bold Steel ASTM A307-A

Hexagon Nut Steel ASTM A307-A

Square Head Bolt Steel ASTM A307-A

Hexagon Nut Brass ASTM B16

Dimensions (mm / Inch)

Valve Size

50mm / 2” 65mm / 2-1/2” 80mm / 3” 100mm / 4” 150mm / 6” 200mm / 8” 250mm / 10” 300mm / 12”mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch

A 177.8 7 190.5 7-1/2 203.2 8 228.6 9 266.7 10-1/2 292.1 11-1/2 330.2 13 355.6 14

B 386 15-1/2 454 17-7/8 514 20-1/4 645 25-3/8 860 33-7/8 1102 43-3/8 1324 52-1/8 1524 60

D 177.8 7 177.8 7 203.2 8 254 10 304.8 12 355.6 14 406.4 16 457.2 18168.3 6-5/8

Note: Sizes up to 3” inclusive made with yoke integral with bonnet, 4”~12” sizes made with separate yoke bolted to bonnet.

Note: Design and materials are subject to change without notice.

FIRE EQUIPMENT 11

NTEICO VALVES

Page 12: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

NT63USWING CHECK VALVE CAST IRON, FLANGED ENDS, 200PSI

Features & Bene�ts

Fire protection valve. UL-listed. FM-approved.

Bolted bonnet. Horizontal swing. Renewable seat and disc.

Flanged ends to ANSI B16.1 Class 125. Other �ange types available.

Working pressure: 200PSI (MAX. temp 63o C)

Conform to MSS SP-71.

Bronze trimmed disc, 125 psi steam @232o C, 200psi. Non-shock cold water oil or gas.

Material List

Part Name Material ASTM SPEC.

Body Cast Iron ASTM A126-B

Disc Ductile Iron A536 65-45-12

Body Seat Ring Cast Bronze ASTM B62

Disc Ring (Rubber) EPDM Commercial

Disc Ring (Bronze) Cast Bronze ASTM B62

Dics WasherDuctile Iron A536 65-45-12

Stainless Steel AISI 304

Hanger Pin Stainless Steel AISI 410

Hanger PlugBrass ASTM B16

Stainless Steel AISI 304

Hanger Ductile Iron A536 65-45-12

Cover Cast Iron ASTM A126-B

Eye Bolt Steel ASTM A307-A

Disc Nut Steel ASTM A307-A

Gasket Non-Asbestos

Hex. Head Bold Steel ASTM A307-A

Hexagon Nut Steel ASTM A307-A

Note: Both vertical and horizontal installation with upward �ow.

Note: Design and materials are subject to change without notice.

Dimensions (mm / Inch)

Valve Size

65mm / 2-1/2” 80mm / 3” 100mm / 4” 150mm / 6” 200mm / 8” 250mm / 10” 300mm / 12”mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch

L - - 241.3 9-1/2 292.1 11-1/2 355.8 14 495.3 19-1/2 622.3 24-1/2 698.5 27-1/2

H - - 194 7-5/8 214 8-7/16 258 10-5/32 312 12-9/32 352 13-27/32 389 15-5/16

FIRE EQUIPMENT 12

NTEICO VALVES

Page 13: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

NT53UFFLANGED END DUCTILE IRON BODY SWING CHECK VALVE (TWIN DISC), 250PSI

Features & Bene�ts

UL-listed. FM-approved.

Ductile Iron body with EPDM seat. Stainless steel plate.

Flanged ends to ANSI B16.1 Class 125. Other �ange types available.

Working pressure: 250PSI, Cold water pressure (MAX. temp 63o C)

Material List

Part Name Material ASTM SPEC.

Body Ductile Iron A536 65-45-12

Body Seal EPDM

Plate Stainless Steel ASTM A351.CF8

Spring Stainless Steel AISI 316

Hinge Pin Stainless Steel AISI 316

Washer Te�on

Thrust Washer Te�on

Plug Mild Steel A 105-80

Square Plug Mild Steel A105-80

Packing Buna”N”

Note: Design and materials are subject to change without notice.

Dimensions (mm / Inch)

Valve Size

65mm / 2-1/2” 80mm / 3” 100mm / 4” 150mm / 6” 200mm / 8” 250mm / 10” 300mm / 12”mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch

L - - 168.3 6-5/8 190.5 7-1/2 228.6 9 266.7 10-1/2 - - - -

“M” PT - - - 1/2” - 1/2” - 3/4” - 3/4” - - - -

FIRE EQUIPMENT 13

NTEICO VALVES

Page 14: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

NT53UGGROOVED END DUCTILE IRON BODY SWING CHECK VALVE, 200PSI

Features & Bene�ts

UL-listed. FM-approved.

Ductile Iron body with EPDM seat. Stainless steel plate.

Grooves conform to ANSI / AWWA C-606 for steel pipe.

Working pressure: 200PSI, Cold water pressure (MAX. temp 63o C)

Material List

Part Name Material ASTM SPEC.

Body Ductile Iron A536 65-45-12

Body Seal EPDM

Plate Stainless Steel ASTM A351.CF8

Spring Stainless Steel AISI 316

Hinge Pin Stainless Steel AISI 316

Washer Te�on

Thrust Washer Te�on

Plug Mild Steel A 105-80

Square Plug Mild Steel A105-80

Packing Buna”N”

Note: Design and materials are subject to change without notice.

Dimensions (mm / Inch)

Valve Size

65mm / 2-1/2” 80mm / 3” 100mm / 4” 150mm / 6” 200mm / 8” 250mm / 10” 300mm / 12”mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch

L - - 130.2 5-1/8 143 5-5/8 177.8 7 209.6 8-1/4 - - - -

A - - 88.9 3-1/2 114.3 4-1/2165.1 6-1/2

219.1 8-5/8 - - -168.3 6-5/8

“M” PT - - - 1/2” - 1/2” - 3/4” - 3/4” - - - -

FIRE EQUIPMENT 14

NTEICO VALVES

Page 15: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

NT800AADJUSTABLE TYPE VERTICAL POST INDICATOR VALVE

Features & Bene�ts

UL-listed. FM-approved.

Vertical type enables underground �re line valve to be operated at ground level with operating wrench.

Material List

Part Name Material ASTM SPEC.

Body Cast Iron ASTM A126-B

Extension Sleeve Cast Iron ASTM A126-B

Socket Cast Iron ASTM A126-B

Cotter Pin Brass ASTM B16

Hex. Head Bolt Steel ASTM A307-A

Extension Rod Mild Steel A 105-80

Hexagon Nut Steel ASTM A307-A

Target Frame Cast Bronze ASTM B62

Round Head Bolt Steel ASTM A307-A

Window Glass Plexiglass

Operating Stem Cast Bronze ASTM B62

Retaining Ring Steel SAE 1065-1090

Round Head Bold Steel ASTM A307-A

Plug Steel ASTM A307-A

Cap Cast Iron ASTM A126-B

Sign Shield SPC

Operating Wrench Ductile Iron A536 65-45-12

SIgn Plate “OPEN” Aluminum

Sign Plate “SHUT” Aluminum

Window Frame Steel Commercial

Dimensions (Inch)

Extension Sleeve Length

Extension Rod Length

TRENCH DEPTHWGT. Lbs.2-1/2”

valve 3”valve 4”valve 6”valve 8”valve 10”valve 12”valve

A Post 3’ 6’ 3’-4” to 5’-4” 3’-8” to 5’-8” 3’-8” to 5’-8” 4’-1” to 6’-1” 4’-5” to 6’-5” 4’-9.5” to 6’-9.5” 5’-2” to 7’-2” 252

Turns to Open - 8 8 10-1/2 12-1/2 16-1/2 20-1/2 24-1/2 -

FIRE EQUIPMENT 15

NTEICO VALVES

Page 16: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

NT8130RESILIENT SEATED GATE VALVE, N.R.S FLANGED ENDS, 300PSI

Material List

Part Name Material ASTM SPEC.

Body Ductile Iron A536 65-45-12

Wedge Ductile Iron Coated with EPDM

Wedge Nut Cast Bronze ASTM B62

Bonnet Ductile Iron A536 65-45-12

Stem Ring Cast Bronze ASTM B62

Stem Stainless Steel AISI 304

Box Ductile Iron A536 65-45-12

Hand Wheel Cast Iron ASTM A126-B

Washer Stainless Steel AISI 304

Bonnet Bolt Stainless Steel AISI 304

O Ring EPDM Commercial

Rubber Gasket EPDM Commercial

Features & Bene�ts

Fire protection valve. UL-listed. FM-approved.

Valves comply with AWWA C515

Working pressure 300PSI. Cold water pressure (Max. temp 63o C).

Flanged ends to ANSI B16.1 Class 125. Other �ange types available.

Application: Fire protection / Air Condition / Plumbing.

Epoxy coated interior / Exterior to AWWA C-550.

Dimensions (mm / Inch)

Valve Size

65mm / 2-1/2” 80mm / 3” 100mm / 4” 150mm / 6” 200mm / 8” 250mm / 10” 300mm / 12”mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch

A 190.5 7-1/2 203.2 8 228.6 9 266.7 10-1/2 292.1 11-1/2 330.2 13 355.6 14

B 254 10 280 11 318 12-1/2 432 17 533 21 622 24-1/2 718 28-1/4

C 177.8 7 254 10 254 10 304.8 12 355.6 14 406.4 16 457.2 18

Note: Design and materials are subject to change without notice.

FIRE EQUIPMENT 16

NTEICO VALVES

Page 17: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

NT8230RESILIENT SEATED GATE VALVE, OS&Y FLANGED ENDS, 300PSI

Material List

Part Name Material ASTM SPEC.

Body Ductile Iron A536 65-45-12

Wedge Ductile Iron Coated with EPDM

Wedge Nut Stainless Steel AISI 201

Bonnet Ductile Iron A536 65-45-12

Packing Graphite Packing

Bonnet Bolt Stainless Steel AISI 304

Gland Flange Ductile Iron A536 65-45-12

Square Head Bolt Stainless Steel AISI 304

Stem Stainless Steel AISI 304

Yoke Sleeve Cast Bronze ASTM B62

Hand Wheel Cast Iron A536 65-45-12

Rubber Gasket EPDM Commercial

Hexagon Nut Stainless Steel AISI 304

Features & Bene�ts

Fire protection valve. UL-listed. FM-approved.

Valves comply with AWWA C515

Working pressure 300PSI. Cold water pressure (Max. temp 63o C).

Flanged ends to ANSI B16.1 Class 125. Other �ange types available.

Application: Fire protection / Air Condition / Plumbing.

Epoxy coated interior / Exterior to AWWA C-550.

Dimensions (mm / Inch)

Valve Size

65mm / 2-1/2” 80mm / 3” 100mm / 4” 150mm / 6” 200mm / 8” 250mm / 10” 300mm / 12”mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm Inch

A 190.5 7-1/2 203.2 8 228.6 9 266.7 10-1/2 292.1 11-1/2 330.2 13 355.6 14

B(Open) 395 15-1/2 496 19-1/2 553 21-3/4 750 29-1/2 946 37-1/4 1118 44 1327 52-1/4

B(Close) 330 13 106 16 448 17-3/4 590 24-1/4 736 29 857 33-3/4 1016 40

C 203 8 254 10 254 10 304.8 12 355.6 14 406.4 16 457.2 18

Note: Design and materials are subject to change without notice.

FIRE EQUIPMENT 17

NTEICO VALVES

Page 18: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

GENERAL TERMS AND CONDITIONSGENERAL These terms and conditions shall control with respect to any purchase or sale of Seller’s products. No waiver, alteration or modi�cation of these terms and conditions whether on Buyer’s purchase order or otherwise shall be valid unless the waiver, alteration or modi�cation is speci�cally accepted in writing and signed by an authorized representative of Seller.

DELIVERY Seller will make every e�ort to complete delivery of products as indicated on Seller’s acceptance of an order, but Seller assumes no responsibility or liability, and will accept no back charge, for loss or damage due to delay or delivery caused by acts of God, war labor di�culties, accident delays or carriers, by contractors or suppliers, inability to obtain materials, shortages of fuel and energy, or any other causes of any kind whatsoever beyond the control of Seller. Seller may terminate any contract of sale of its Products without liability of any nature, by written notice to Buyer, in the event that the delay in the delivery or performance resulting from any of the aforesaid causes shall continue for a period of sixty (60) days. Under no circumstances shall Seller be liable for any special or consequential damages or for loss, damage, or expense (whether or not based on negligence) directly or indirectly arising from delays or failure to give notice of delay.

WARRANTY We warrant all products to be free from defects in materials and workmanship under normal conditions of use and service. Our obligation under this warranty is limited to repairing or replacing at our option at our factory any product which shall within one year after delivery to original Buyer be returned with transportation charges prepaid, and our examinations shall show to our satisfaction to have been defective.

This warranty made expressly in lieu of any other warranties, express or implied, including any implied warranty of merchantability or �tness for a particular purpose. The Buyer’s sole and exclusive remedy shall be for the repair or replacement of defective products as provided herein. The Buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost pro�ts, lost sales, injury to person or property or any other incidental or consequential loss) shall be available to him.

Seller neither assumes nor authorizes any person to assume for it any other liability in connection with the sale of any such products.

This warranty shall not apply to any product which has been subject to misuse, negligence or accident, which has been repaired or altered in any manner outside of Seller’s factory or which has been used in a manner contrary to Seller’s instructions or recommendations. Seller shall not be responsible for design errors due to inaccurate or incomplete information supplied by Buyer or its representative.

LIABILITY Seller will not be liable for any loss, damage cost of repairs incidental or consequential damage of any kind, whether based upon warranty (except for the obligation accepted by Seller under “Warranty” above), contract or negligence, arising in connection with the design, manufacture, sale, use or repair of the products or of the engineering designs supplied to Buyer.

RETURNS Seller cannot accept return of any products unless its written permission has been �rst obtained, in which case same will be credited subject to the following: (a) All material returned must, on its arrival at Seller’s plant, be found to be in �rst-class condition: if not, cost of putting in saleable condition will be deducted from credit memoranda; (b) A handling charge deduction of twenty �ve (25%) will be made from all credit memoranda issued for material returned; (c) Transportation charges, if not prepaid, will be deducted from credit memoranda

SHIPMENTS All products send out will be carefully examined, counted and packed. The cost for any special packaging or special handling caused by Buyer’s requirements or request shall be added to the amount of the order. No claim for shortages will be allowed unless made in writing within ten (10) days of receipt of a shipment. Claims for products damaged or lost in transit should be made on the carrier, as Seller’s responsibility ceases, and title passes, on delivery to the carrier.

PRODUCTS Orders covering special or non-standard products are not subject to cancellation except on such terms as Seller may specify on application.

FIRE EQUIPMENT 18

NTEICO VALVES

Page 19: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

VALVESOS & Y GATE VALVES, SWING CHECK VALVESNRS GATE VALVES, POST INDICATOR VALVES

Page 20: OS & Y GATE VALVES, SWING CHECK VALVES - NTEICO … · OS & Y GATE VALVES, SWING CHECK VALVES NRS GATE VALVES, ... Material List Part Name Material ... O Pre-grooved stem for supervisory

VALVESOS & Y GATE VALVES, SWING CHECK VALVESNRS GATE VALVES, POST INDICATOR VALVES

NTEICO FACTORY:Industrial Area #12

Sharjah, United Arab EmiratesTel: +971 6 5438633 | Fax: +971 6 5438651

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

NTEICO DUBAI OFFICE:Tower 51 @ Business Bay, P.O. Box: 236613,

Dubai, United Arab EmiratesTel: +971 4 348 0012 | Fax: +971 4 394 1994

[email protected] | www.nteico.com