FAAC BARRIER GATE SYSTEMS:A c c e s s C o n t r o l a n d C o n v e i e n c e

f o r D e m a n d i n g A p p l i c a t i o n s .

gate operating equipment.

M o d e l

6 2 0

Mode l 620 i s i dea l fo r med ium-h i gh t r a f f i c con t ro l

Mode l 620 Hydrau l i c Ba rr i e r Ga te Opera tor

When Speed Counts

The Model 620 is designed specifical-ly for traffic control applications thatrequire extremely fast opening andclosing times. When used with analuminum beam of 8 1/2 feet or less,the 620 has an opening time of under2 seconds and a 100% duty cycle.

The 620 can also operate a woodenbeam up to 16 feet in less than 3 seconds.

FlexibilityOutstanding flexibility make the 620the most complete barrier in itsclass. The 620 can be equipped withan articulated beam for use underlow ceilings and can be outfitted witha skirt to stop unauthorized entryunder the barrier arm.

624 MPS Electronic Control PanelThe microprocessor in the 624 MPScontrol panel contains logic thatallows it to fully and independently

cycle the barrier upon receivingappropriate signals. It can also be set to follow specific open/close/stopinstructions. Consequently, the barrier can be easily interconnectedwith other traffic control devices.

The 624 MPS also features an emer-gency input which, for example, canbe connected to a fire alarm...whenthe alarm is tripped, the barrier willopen and stay open until reset.

Access control accessories Round beams and breakaway beams available

Skirted beam kit

T h e F A A C M o d e l 6 2 0 r a i s e s b e a m s f a s t

A white cabinet can be substituted for the standardFAAC orange at no extra charge.

LIT-620REV-10-03

Note: Operator specifications are approximate. Environmental factors can change the performance of the operator.Your installer will advise you regarding which model of operator will work best for your site and application.

Articulated beam kit

Duty typemedium-high volume traffic control;standard width entrances

Duty cycle at 72(F (24(C)100% motor run time

Opening time 2-3 sec (depending on beam length)

Beam lengths 6 1/2-13 ft (2-4 m)

Beam types availablerigid, round. articulated, skirted, hinged (breakaway)

Beam materials availablerigid: aluminum and wood round: aluminumarticulated & skirted: aluminumbreakaway: aluminum

Power supply 230 VAC -10% to +6%; 60Hz

Motor horsepower 1/3 hp

Motor speed 1400-2800 rpm

Ambient temperature range-13

oF to 158

oF (-25

oC to 70

oC)

Hydraulic locking positionsopened and closed

Cabinet dimensions (l x w x h)6 9/16 x 13 3/4 x 42 1/2 in. (17 x 35 x 108 cm)

Cabinet weight (approx.) 170 lb (77 kg)

Electric motor single phase, bi-directional

Absorbed power 220 W

Current drawn 1 A

Pump delivery1.58, 2.11, 3.16, 4.22 pt/min (.75, 1, 1.5, 2 l/min)

Motor winding thermal cutout 248

oF (120

oC)

Torque 0-147.5 ft-lb (200 Nm)

Anti-crush system hydraulic valves (by-pass)

Mechanical deceleration adjustable

Casing anti-corrosion treatment cataphoresis

Cabinet finishpolyester paint, powder coated RAL 2004

Housing protection IP 55

Cooling automatic fan

Model 620 Specifications