rental equipment hydraulic flushing unit 1x18,5kw · replacement of your existing systems, we offer...
TRANSCRIPT
ADVANTAGES
- Continuous flushing, even during element changes.
- Compatible with line diameters up to 3” and various oil types.
- Relatively high pressures aim to minimize flushing operations and
decrease machine downtime.
- Additional motor-pump assembly in order to perform pressure tests up
to 450 bar.
- Multiple filter ratings, real time flow measurement and oil condition
monitoring.
- Optional technical support performed by an experienced and
authorized service engineer
The hydraulic market recognizes that
oil contamination causes 80% of all
mechanical failures in hydraulic systems. Oil
contamination results from the presence of
solid particles such as metal, sand and rubber. These
particles might not only be present in systems in-service
but also in newly built up hydraulic systems.
In the end, oil contamination leads to increased
component wear, maintenance cost and machine
downtime. Flushing causes turbulent flows and thus
can be considered as a useful solution to remove oil
contamination in order to achieve the hydraulic system’s
required oil cleanliness level and to ensure operation.
Doedijns designed a range of electrically driven
hydraulic flushing units capable of flushing and
pressurizing process lines from 1/8” to 3”. Return filter
assemblies are installed for dirt collection. An integrated
Condition Monitoring System is mounted in order to
determine if the required oil cleanliness level is achieved.
Several components are installed to monitor all process
parameters such as temperature, flow and pressure.
Rental equipment Hydraulic Flushing Unit 1x18,5kW
engineering your ambitions
TECHNICAL SPECIFICATIONS
1x18,5kW
Setting 1 260 l/min @ 40 bar
Setting 2 170 l/min @ 60 bar
Setting 3 90 l/min @ 100 bar
Total power output 1x18,5kW
FLUSHING? WE WILL TAKE CARE OF IT
To meet temporary requests for additional capacity or for temporary
replacement of your existing systems, we offer rental Flushing units. In
order to achieve an optimal flushing result, Doedijns offers to manage
your flushing activities. An experienced and authorized Doedijns service
engineer will take care of your flushing demands.
1x22kW e-motor 1x18,5kW e-motor 1x5,5kW e-motor2x15kW e-motor
(glycol only)4x22kW e-motor
OTHER AVAILABLE FLUSHING UNITS
Electric motors Pump capacity
4x22kW 1,0-1200 l/min @ 30-550 bar
2x11kW 1,5-260 l/min @ 40-600 bar
1x22kW 56 l/min @ 165 bar
1x5,5kW 22 l/min @ 20-260 bar
2x15kW (glycol only) 12,5-25 l/min @ 20-500 bar
OPTIONAL SERVICES
- Connection materials included upon request
- Replacement filters
- Accurate fluid analysis with the Portable Laser Particle Counter, for
systems with pressures up to 400 bar
- Flushing advice
- On/site service engineer
Portable Laser Particle Counter (PLPC)Hydraulic Flushing Unit 1x18,5kW
DOEDIJNS B.V.- Coenecoop 103-105 | 2741 PH Waddinxveen, the Netherlands | T +31 (0)182 30 28 88 | [email protected] | www.doedijns.com